Crystal structure of CotA laccase complexed with 2,2-azinobis-(3-ethylbenzothiazoline-6-sulfonate) at a novel binding site

Tailoring CotA Laccase Substrate Specificity by Rationally Reshaping Pocket Edge

CotA is a bacterial multicopper oxidase, capable of oxidizing lots of substrates. In previous work, small size lignin phenol derivates were found to lie only in the partially covered part of pocket. However, big size substate would occupy the whole pocket to react. In this work, five residues sitting at the edge of the pocket were selected to study their roles in regulating activities against different size substrates. All mutants showed impaired activities against small size sinapic acid, however, A227E, G321F and G321P showed around 25 % increase of activities against big size ditaurobilirubin compared to wild type (WT). T262F/G321F showed moderate increased activity to alazin red S. kcat/Kms against ditaurobilirubin of A227E, T262F and G321F are around 1.5, 3 and 1.5 folds of WT's. Unexpectedly, heterologous expression yields of T262F, T262F/G321F and T262F/G321P in Escherichia coli greatly increased by around 5, 7 and 21 folds compared to WT, respectively. It is speculated positive mutants would provide a beneficial orientation for big size substrates. Substituting semi-buried residue T262 by a hydrophobic amino acid might enhance expression yields mainly by increasing van der waals and hydrophobic interaction. This work exemplified rationally regulating specific activities of laccase and is valuable for industrial application.

Polymerization potential of a bacterial CotA-laccase for β-naphthol: enzyme structure and comprehensive polymer characterization

Introduction

Laccases are blue-multicopper containing enzymes that are known to play a role in the bioconversion of recalcitrant compounds. Their role in free radical polymerization of aromatic compounds for their valorization remains underexplored. In this study, we used a pBAD plasmid containing a previously characterized CotA laccase gene (abbreviated as Bli-Lacc) from Bacillus licheniformis strain ATCC 9945a to express this enzyme and explore its biotransformation/polymerization potential on β-naphthol.

Methods

The protein was expressed from TOP10 cells of Escherichia coli after successful transformation of the plasmid. Immobilized metal affinity chromatography (IMAC) was used to generate pure protein. The biocatalytic polymerization reaction was optimized based on temperature, pH and starting enzyme concentration. 1H and 13C solution nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FTIR), and solid-state NMR (ssNMR) were used to characterize the formed polymer. A one-gram conversion reaction was done to explore applicability of the reaction in a pilot-scale.

Results

The polymerization reaction generated a brown precipitate, and its chemical structure was confirmed using 1H and 13C NMR and FTIR. SsNMR revealed the presence of two different orientational hydroxyl functional groups in the polymer in addition to the presence of a very small amount of ether linkages (< 2%). This analysis elucidated that polymerization occurred mainly on the carbons of the aromatic rings, rather than on the carbons attached to the hydroxyl groups, resulting in a condensed ring or polynuclear aromatic structure. The reaction was optimized, and the highest yield was attained under conditions of 37°C, pH 10 and a starting enzyme concentration of 440 nM in 50 mM phosphate buffer. A one-gram conversion yielded 216 mg of polymer as dry mass. The crystal structure of the enzyme was solved at 2.7 Å resolution using X-ray crystallography and presented with a hexagonal space group. The final structure was deposited in the Protein Databank (PDB) with an ID-9BD5.

Discussion

This article provides a green/enzymatic pathway for the remediation of phenolics and their valorization into potential useful polymeric materials. The comprehensive analysis of the formed polymer provides insight into its structure and functional moieties present. Based on the yield of the one-gram conversion, this synthetic method proves useful for a pilot-scale production level and opens opportunities to invest in using this polymer for industrial/environmental applications.

Identification of new targets for the diagnosis of cysts (four) and trophozoites (one) of the eye pathogen Acanthamoeba

Acanthamoebae , which are free-living amoebae, cause corneal inflammation (keratitis) and blindness, if not diagnosed and effectively treated. While trophozoites adhere to and damage the cornea, Acanthamoeba cysts, the walls of which contain cellulose and have two layers connected by conical ostioles, are the diagnostic form by microscopy of the eye or of corneal scrapings. We recently used structural and experimental methods to characterize cellulose-binding domains of Luke and Leo lectins, which are abundant in the inner layer and ostioles. However, no antibodies have been made to these lectins or to a Jonah lectin and a laccase, which are abundant in the outer layer. Here we used confocal microscopy to show that rabbit antibodies to recombinant Luke, Leo, Jonah, and laccase generally support localizations of GFP-tagged proteins in walls of transfected Acanthamoebae. Rabbit antibodies to all four wall proteins efficiently detected calcofluor white-labeled cysts of 10 of 11 Acanthamoeba isolates obtained from the ATCC, including five T4 genotypes that cause most cases of keratitis. Laccase shed into the medium during encystation was detected by an enzyme-linked immunoassay. We also used structural and experimental methods to characterize the mannose-binding domain of an Acanthamoeba mannose-binding protein and showed that rabbit antibodies to the mannose-binding domain efficiently detected trophozoites of all 11 Acanthamoeba isolates. We conclude that four wall proteins are all excellent targets for diagnosing Acanthamoeba cysts in the eye or corneal scrapings, while the mannose-binding domain is an excellent target for identifying trophozoites in cultures of corneal scrapings.

Importance

Free-living amoeba in the soil or water cause Acanthamoeba keratitis, which is diagnosed by identification of cysts by microscopy of the eye or of corneal scrapings, using calcofluor-white that unfortunately cross-reacts with fungi and plants. Alternatively, Acanthamoeba infections are diagnosed by identification of trophozoites in cultures of scrapings. Here we showed that rabbit antibodies to four abundant cyst wall proteins (Jonah, Luke, Leo, and laccase) each efficiently detect calcofluor-white-labeled cysts of 10 of 11 Acanthamoeba isolates obtained from the ATCC. Further, laccase released into the medium by encysting Acanthamoebae was detected by an enzyme-linked immunoassay. We also showed that rabbit antibodies to the mannose-binding domain of the Acanthamoeba mannose-binding protein, which mediates adherence of trophozoites to keratinocytes, efficiently identifies trophozoites of all 11 ATCC isolates. In summary, four wall proteins and the ManBD appear to be excellent targets for diagnosis of Acanthamoeba cysts and trophozoites, respectively.

Cellulose binding and the timing of expression influence protein targeting to the double-layered cyst wall of Acanthamoeba

The cyst wall of the eye pathogen Acanthamoeba castellanii contains cellulose and has ectocyst and endocyst layers connected by conical ostioles. Cyst walls contain families of lectins that localize to the ectocyst layer (Jonah) or the endocyst layer and ostioles (Luke and Leo). How lectins and an abundant laccase bind cellulose and why proteins go to locations in the wall are not known and are the focus of the studies here. Structural predictions identified β-jelly-roll folds (BJRFs) of Luke and sets of four disulfide knots (4DKs) of Leo, each of which contains linear arrays of aromatic amino acids, also present in carbohydrate-binding modules of bacterial and plant endocellulases. Ala mutations showed that these aromatics are necessary for cellulose binding and proper localization of Luke and Leo in the Acanthamoeba cyst wall. BJRFs of Luke, 4DKs of Leo, a single β-helical fold (BHF) of Jonah, and a copper oxidase domain of the laccase each bind to glycopolymers in both layers of deproteinated cyst walls. Promoter swaps showed that ectocyst localization does not just correlate with but is caused by early encystation-specific expression, while localization in the endocyst layer and ostioles is caused by later expression. Evolutionary studies showed distinct modes of assembly of duplicated domains in Luke, Leo, and Jonah lectins and suggested Jonah BHFs originated from bacteria, Luke BJRFs share common ancestry with slime molds, while 4DKs of Leo are unique to Acanthamoeba.IMPORTANCEAcanthamoebae is the only human parasite with cellulose in its cyst wall and conical ostioles that connect its inner and outer layers. Cyst walls are important virulence factors because they make Acanthamoebae resistant to surface disinfectants, hand sanitizers, contact lens sterilizers, and antibiotics applied to the eye. The goal here was to understand better how proteins are targeted to specific locations in the cyst wall. To this end, we identified three new proteins in the outer layer of the cyst wall, which may be targets for diagnostic antibodies in corneal scrapings. We used structural predictions and mutated proteins to show linear arrays of aromatic amino acids of two unrelated wall proteins are necessary for binding cellulose and proper wall localization. We showed early expression during encystation causes proteins to localize to the outer layer, while later expression causes proteins to localize to the inner layer and the ostioles.

Recent advances in laccase activity assays: A crucial challenge for applications on complex substrates

Despite being one of the first enzymes discovered in 1883, the determination of laccase activity remains a scientific challenge, and a barrier to the full use of laccase as a biocatalyst. Indeed, laccase, an oxidase of the blue multi-copper oxidases family, has a wide range of substrates including substituted phenols, aromatic amines and lignin-related compounds. Its one-electron mechanism requires only oxygen and releases water as a reaction product. These characteristics make laccase a biocatalyst of interest in many fields of applications including pulp and paper industry, biorefineries, food, textile, and pharmaceutical industries. But to fully envisage the use of laccase at an industrial scale, its activity must be reliably quantifiable on complex substrates and in complex matrices. This review aims to describe current and emerging methods for laccase activity assays and place them in the context of a potential industrial use of the enzyme.

Enzymatic polyethylene biorecycling: Confronting challenges and shaping the future

Polyethylene (PE) is a widely used plastic known for its resistance to biodegradation, posing a significant environmental challenge. Recent advances have shed light on microorganisms and insects capable of breaking down PE and identified potential PE-degrading enzymes (PEases), hinting at the possibility of PE biorecycling. Research on enzymatic PE degradation is still in its early stages, especially compared to the progress made with polyethylene terephthalate (PET). While PET hydrolases have been extensively studied and engineered for improved performance, even the products of PEases remain mostly undefined. This Perspective analyzes the current state of enzymatic PE degradation research, highlighting obstacles in the search for bona fide PEases and suggesting areas for future exploration. A critical challenge impeding progress in this field stems from the inert nature of the C-C and C-H bonds of PE. Furthermore, breaking down PE into small molecules using only one monofunctional enzyme is theoretically impossible. Overcoming these obstacles requires identifying enzymatic pathways, which can be facilitated using emerging technologies like omics, structure-based design, and computer-assisted engineering of enzymes. Understanding the mechanisms underlying PE enzymatic biodegradation is crucial for research progress and for identifying potential solutions to the global plastic pollution crisis.

Molecular Docking of Lac_CB10: Highlighting the Great Potential for Bioremediation of Recalcitrant Chemical Compounds by One Predicted Bacteroidetes CopA-Laccase

Laccases are multicopper oxidases (MCOs) with a broad application spectrum, particularly in second-generation ethanol biotechnology and the bioremediation of xenobiotics and other highly recalcitrant compounds. Synthetic pesticides are xenobiotics with long environmental persistence, and the search for their effective bioremediation has mobilized the scientific community. Antibiotics, in turn, can pose severe risks for the emergence of multidrug-resistant microorganisms, as their frequent use for medical and veterinary purposes can generate constant selective pressure on the microbiota of urban and agricultural effluents. In the search for more efficient industrial processes, some bacterial laccases stand out for their tolerance to extreme physicochemical conditions and their fast generation cycles. Accordingly, to expand the range of effective approaches for the bioremediation of environmentally important compounds, the prospection of bacterial laccases was carried out from a custom genomic database. The best hit found in the genome of Chitinophaga sp. CB10, a Bacteroidetes isolate obtained from a biomass-degrading bacterial consortium, was subjected to in silico prediction, molecular docking, and molecular dynamics simulation analyses. The putative laccase CB10_180.4889 (Lac_CB10), composed of 728 amino acids, with theoretical molecular mass values of approximately 84 kDa and a pI of 6.51, was predicted to be a new CopA with three cupredoxin domains and four conserved motifs linking MCOs to copper sites that assist in catalytic reactions. Molecular docking studies revealed that Lac_CB10 had a high affinity for the molecules evaluated, and the affinity profiles with multiple catalytic pockets predicted the following order of decreasing thermodynamically favorable values: tetracycline (-8 kcal/mol) > ABTS (-6.9 kcal/mol) > sulfisoxazole (-6.7 kcal/mol) > benzidine (-6.4 kcal/mol) > trimethoprim (-6.1 kcal/mol) > 2,4-dichlorophenol (-5.9 kcal/mol) mol. Finally, the molecular dynamics analysis suggests that Lac_CB10 is more likely to be effective against sulfisoxazole-like compounds, as the sulfisoxazole-Lac_CB10 complex exhibited RMSD values lower than 0.2 nm, and sulfisoxazole remained bound to the binding site for the entire 100 ns evaluation period. These findings corroborate that LacCB10 has a high potential for the bioremediation of this molecule.

Recent Theoretical Insights into the Oxidative Degradation of Biopolymers and Plastics by Metalloenzymes

Molecular modeling techniques have become indispensable in many fields of molecular sciences in which the details related to mechanisms and reactivity need to be studied at an atomistic level. This review article provides a collection of computational modeling works on a topic of enormous interest and urgent relevance: the properties of metalloenzymes involved in the degradation and valorization of natural biopolymers and synthetic plastics on the basis of both circular biofuel production and bioremediation strategies. In particular, we will focus on lytic polysaccharide monooxygenase, laccases, and various heme peroxidases involved in the processing of polysaccharides, lignins, rubbers, and some synthetic polymers. Special attention will be dedicated to the interaction between these enzymes and their substrate studied at different levels of theory, starting from classical molecular docking and molecular dynamics techniques up to techniques based on quantum chemistry.

Enzymatic Oxidation of Ca-Lignosulfonate and Kraft Lignin in Different Lignin-Laccase-Mediator-Systems and MDF Production

Laccase-mediator-oxidized lignin offers replacement for conventional chemical binders to produce fiberboards. Compared to the previously reported laccase–mediator system (LMS), a lignin-laccase-mediator-system (LLMS) has an advantage in that it requires much shorter fiber-enzyme incubation time due to significantly increased redox reactions. However, the cost of regularly applying laccase on an industrial scale is currently too high. We have employed CcLcc5 from cultures of the basidiomycete Coprinopsis cinerea as a novel basi-laccase (a CAZy subfamily AA1_1 laccase) in medium-density fiberboard (MDF) production, in comparison to the commercial formulation Novozym 51003 with recombinantly produced asco-laccase MtL (a CAZy subfamily AA1_3 laccase-like multicopper oxidase from the ascomycete Myceliophthora thermophila). With the best-performing natural mediator 2,6-dimethoxyphenol (DMP), unpurified CcLcc5 was almost as good as formulated Novozym 51003 in increasing the molecular weight (MW) of the technical lignins tested, the hydrophilic high-MW Ca-lignosulfonate and the hydrophobic low-MW kraft lignin (Indulin AT). Oxygen consumption rates of the two distantly related, poorly conserved enzymes (31% sequence identity) with different mediators and lignosulfonate were also comparable, but Indulin AT significantly reduced the oxidative activity of Novozym 51003 unlike CcLcc5, regardless of the mediator used, either DMP or guaiacol. Oxygen uptake by both laccases was much faster with both technical lignins with DMP than with guaiacol. In case of lignosulfonate and DMP, 20–30 min of incubation was sufficient for full oxygen consumption, which fits in well in time with the usual binder application steps in industrial MDF production processes. LLMS-bonded MDF was thus produced on a pilot-plant scale with either crude CcLcc5 or Novozym 51003 at reduced enzyme levels of 5 kU/kg absolutely dry wood fiber with lignosulfonate and mediator DMP. Boards produced with CcLcc5 were comparably good as those made with Novozym 51003. Boards reached nearly standard specifications in internal bond strength (IB) and modulus of rupture (MOR), while thickness swelling (TS) was less good based on the hydrophilic character of lignosulfonate. LLMS-bonded MDF with Indulin AT and DMP performed better in TS but showed reduced IB and MOR values.

Conversion of lignin-derived 3-methoxycatechol to the natural product purpurogallin using bacterial P450 GcoAB and laccase CueO

Purpurogallin is a natural benzotropolone extracted from Quercus spp, which has antioxidant, anticancer, and anti-inflammatory properties. Purpurogallin is typically synthesized from pyrogallol using enzymatic or metal catalysts, neither economically feasible nor environmentally friendly. 3-Methoxycatechol (3-MC) is a lignin-derived renewable chemical with the potential to be a substrate for the biosynthesis of purpurogallin. In this study, we designed a pathway to produce purpurogallin from 3-MC. We first characterized four bacterial laccases and identified the laccase CueO from Escherichia coli, which converts pyrogallol to purpurogallin. Then, we used CueO and the P450 GcoAB reported to convert 3-MC to pyrogallol, to construct a method for producing purpurogallin directly from 3-MC. A total of 0.21 ± 0.05 mM purpurogallin was produced from 5 mM 3-MC by whole-cell conversion. This study provides a new method to enable efficient and sustainable synthesis of purpurogallin and offers new insights into lignin valorization. KEY POINTS: • Screening four bacterial laccases for converting pyrogallol to purpurogallin. • Laccase CueO from Escherichia coli presenting the activity for purpurogallin yield. • A novel pathway for converting lignin-derived 3-methoxycatechol to purpurogallin.

Fungal Laccases: The Forefront of Enzymes for Sustainability

Enzymatic catalysis is one of the main pillars of sustainability for industrial production. Enzyme application allows minimization of the use of toxic solvents and to valorize the agro-industrial residues through reuse. In addition, they are safe and energy efficient. Nonetheless, their use in biotechnological processes is still hindered by the cost, stability, and low rate of recycling and reuse. Among the many industrial enzymes, fungal laccases (LCs) are perfect candidates to serve as a biotechnological tool as they are outstanding, versatile catalytic oxidants, only requiring molecular oxygen to function. LCs are able to degrade phenolic components of lignin, allowing them to efficiently reuse the lignocellulosic biomass for the production of enzymes, bioactive compounds, or clean energy, while minimizing the use of chemicals. Therefore, this review aims to give an overview of fungal LC, a promising green and sustainable enzyme, its mechanism of action, advantages, disadvantages, and solutions for its use as a tool to reduce the environmental and economic impact of industrial processes with a particular insight on the reuse of agro-wastes.

Structural analysis and biochemical properties of laccase enzymes from two Pediococcus species

Prokaryotic laccases are emergent biocatalysts. However, they have not been broadly found and characterized in bacterial organisms, especially in lactic acid bacteria. Recently, a prokaryotic laccase from the lactic acid bacterium Pediococcus acidilactici 5930, which can degrade biogenic amines, was discovered. Thus, our study aimed to shed light on laccases from lactic acid bacteria focusing on two Pediococcus laccases, P. acidilactici 5930 and Pediococcus pentosaceus 4816, which have provided valuable information on their biochemical activities on redox mediators and biogenic amines. Both laccases are able to oxidize canonical substrates as ABTS, ferrocyanide and 2,6-DMP, and non-conventional substrates as biogenic amines. With ABTS as a substrate, they prefer an acidic environment and show sigmoidal kinetic activity, and are rather thermostable. Moreover, this study has provided the first structural view of two lactic acid bacteria laccases, revealing new structural features not seen before in other well-studied laccases, but which seem characteristic for this group of bacteria. We believe that understanding the role of laccases in lactic acid bacteria will have an impact on their biotechnological applications and provide a framework for the development of engineered lactic acid bacteria with enhanced properties.

Lignin-oxidizing activity of bacterial laccases characterized using soluble substrates and polymeric lignin

Efficient biotransformation of lignin requires the activity of different oxidative enzymes. In this work, 19 bacterial multi-copper oxidases were screened for oxidase activity against 19 soluble substrates and revealed the highest activity in the laccase CotA_Bsu (BSU0630) from Bacillus subtilis. Structure-based site-directed mutagenesis of CotA_Bsu identified four conserved residues (His419, Cys492, His497, and Met502) as critical for activity against 2,2'-azinobis(3-ethylbenzthiazoline-6-sulfonate) (ABTS). Greatly reduced oxidase activity was found in the CotA_Bsu mutant proteins E213A, N214A, C229A, N264A, E298A, T415A, R416A, Q468A, and T480A. We also designed a lignin-agarose plate screen for detecting oxidase activity of purified proteins against polymeric lignin, which confirmed the results obtained with ABTS and identified three mutant variants with increased activity toward kraft lignin (E213A, T415A, and T260A). X-ray photoelectron spectroscopy analysis of low sulfonate kraft lignin after incubation with CotA_Bsu revealed a reduction in the content of CC/CC bonds and increase in CO/CO bonds. Product analyses using mass spectrometry, liquid chromatography, and bright-field microscopy revealed an increased polymerization state of reaction products suggesting that formation of radical intermediates was followed by radical coupling. Our results provide further insights into the mechanisms of lignin oxidation by laccases.

Balancing Enzyme Encapsulation Efficiency and Stability in Complex Coacervate Core Micelles

Encapsulation of charged proteins into complex coacervate core micelles (C3Ms) can be accomplished by mixing them with oppositely charged diblock copolymers. However, these micelles tend to disintegrate at high ionic strength. Previous research showed that the addition of a homopolymer with the same charge sign as the protein improved the stability of protein-containing C3Ms. In this research, we used fluorescence correlation spectroscopy (FCS) and dynamic light scattering (DLS) to study how the addition of the homopolymer affects the encapsulation efficiency and salt stability of the micelles. We studied the encapsulation of laccase spore coat protein A (CotA), a multicopper oxidase, using a strong cationic-neutral diblock copolymer, poly(N-methyl-2-vinyl-pyridinium iodide)-block-poly(ethylene oxide) (PM2VP128-b-PEO477), and a negatively charged homopolymer, poly(4-styrenesulfonate) (PSS215). DLS indeed showed an improved stability of this three-component C3M system against the addition of salt compared to a two-component system. Remarkably, FCS showed that the release of CotA from a three-component C3M system occurred at a lower salt concentration and over a narrower concentration range than the dissociation of C3Ms. In conclusion, although the addition of the homopolymer to the system leads to micelles with a higher salt stability, CotA is excluded from the C3Ms already at lower ionic strengths because the homopolymer acts as a competitor of the enzyme for encapsulation.

Structural basis for monolignol oxidation by a maize laccase

Plant laccases catalyse the oxidation of monolignols in lignification, a process reinforcing the cell wall of many different cell types that provide mechanical support, nutrient transportation and defence against pathogens in plants¹. The isozymes display a broad range of substrate preferences. Here, the substrate preference of a laccase (ZmLac3) from Zea mays (maize) was characterized. The crystal structure of ZmLac3 revealed a compact and deep substrate-binding pocket, and the binding modes of sinapyl alcohol (SinA) and coniferyl alcohol (ConA) were solved. On the basis of structural data and kinetics analysis, we propose that the regionalization of polar and hydrophobic surfaces in the binding pocket of ZmLac3 is vital for defining the orientation of SinA/ConA binding. The extra methoxyl group in SinA makes substantial contributions to interactions between SinA and ZmLac3, which are absent in the ZmLac3-ConA complex. In summary, the polar and hydrophobic interactions between SinA/ConA and ZmLac3 determine the binding positions of the monolignols in ZmLac3. These results provide valuable insight about ZmLac3 catalysis and should aid industrial processes that use plant laccases.

Applications of Microbial Laccases: Patent Review of the Past Decade (2009–2019)

There is a high number of well characterized, commercially available laccases with different redox potentials and low substrate specificity, which in turn makes them attractive for a vast array of biotechnological applications. Laccases operate as batteries, storing electrons from individual substrate oxidation reactions to reduce molecular oxygen, releasing water as the only by-product. Due to society’s increasing environmental awareness and the global intensification of bio-based economies, the biotechnological industry is also expanding. Enzymes such as laccases are seen as a better alternative for use in the wood, paper, textile, and food industries, and they are being applied as biocatalysts, biosensors, and biofuel cells. Almost 140 years from the first description of laccase, industrial implementations of these enzymes still remain scarce in comparison to their potential, which is mostly due to high production costs and the limited control of the enzymatic reaction side product(s). This review summarizes the laccase applications in the last decade, focusing on the published patents during this period.

Laccases: structure, function, and potential application in water bioremediation

The global rise in urbanization and industrial activity has led to the production and incorporation of foreign contaminant molecules into ecosystems, distorting them and impacting human and animal health. Physical, chemical, and biological strategies have been adopted to eliminate these contaminants from water bodies under anthropogenic stress. Biotechnological processes involving microorganisms and enzymes have been used for this purpose; specifically, laccases, which are broad spectrum biocatalysts, have been used to degrade several compounds, such as those that can be found in the effluents from industries and hospitals. Laccases have shown high potential in the biotransformation of diverse pollutants using crude enzyme extracts or free enzymes. However, their application in bioremediation and water treatment at a large scale is limited by the complex composition and high salt concentration and pH values of contaminated media that affect protein stability, recovery and recycling. These issues are also associated with operational problems and the necessity of large-scale production of laccase. Hence, more knowledge on the molecular characteristics of water bodies is required to identify and develop new laccases that can be used under complex conditions and to develop novel strategies and processes to achieve their efficient application in treating contaminated water. Recently, stability, efficiency, separation and reuse issues have been overcome by the immobilization of enzymes and development of novel biocatalytic materials. This review provides recent information on laccases from different sources, their structures and biochemical properties, mechanisms of action, and application in the bioremediation and biotransformation of contaminant molecules in water. Moreover, we discuss a series of improvements that have been attempted for better organic solvent tolerance, thermo-tolerance, and operational stability of laccases, as per process requirements.

Biocatalytic oxidation of flavone analogues mediated by general biocatalysts: horseradish peroxidase and laccase

Horseradish peroxidase (HRP) and laccase are well known oxidases, which have been widely applied for the biosynthesis of organic compounds. In the present work, flavone analogues as an important type of bioactive natural product could be oxidized by HRP or laccase, which afforded dimeric and oxidative flavones. All of the flavone analogues usually possessing phenolic groups could be transformed using HRP. However, only flavonols, isoflavones and chalcones with phenolic groups and dihydroxylflavones were effective substrates of laccase. The radical reaction mechanism with the B-ring of flavone analogues as the radical reaction trigger was proposed for the oxidation of flavones. In silico molecular docking analyses for assaying the interaction between flavone analogues and oxidases indicated that the phenolic groups at the B rings of flavones docked into the HEME active pocket of HRP well. Kinetic behaviors of the oxidation for various flavone analogues mediated by HRP or laccase displayed Hill and substrate inhibition kinetic models. Therefore, in the present work, the oxidation of various flavone analogues mediated by HRP or laccase has been successfully characterized, which would be helpful for the preparation of flavone derivatives.

HRP and laccase as the oxidases have been applied to catalyze the oxidation of various flavones, and the mechanism has been investigated.

A comparative structural analysis of the surface properties of asco-laccases

Laccases of different biological origins have been widely investigated and these studies have elucidated fundamentals of the generic catalytic mechanism. However, other features such as surface properties and residues located away from the catalytic centres may also have impact on enzyme function. Here we present the crystal structure of laccase from Myceliophthora thermophila (MtL) to a resolution of 1.62 Å together with a thorough structural comparison with other members of the CAZy family AA1_3 that comprises fungal laccases from ascomycetes. The recombinant protein produced in A. oryzae has a molecular mass of 75 kDa, a pI of 4.2 and carries 13.5 kDa N-linked glycans. In the crystal, MtL forms a dimer with the phenolic substrate binding pocket blocked, suggesting that the active form of the enzyme is monomeric. Overall, the MtL structure conforms with the canonical fold of fungal laccases as well as the features specific for the asco-laccases. However, the structural comparisons also reveal significant variations within this taxonomic subgroup. Notable differences in the T1-Cu active site topology and polar motifs imply molecular evolution to serve different functional roles. Very few surface residues are conserved and it is noticeable that they encompass residues that interact with the N-glycans and/or are located at domain interfaces. The N-glycosylation sites are surprisingly conserved among asco-laccases and in most cases the glycan displays extensive interactions with the protein. In particular, the glycans at Asn88 and Asn210 appear to have evolved as an integral part of the asco-laccase structure. An uneven distribution of the carbohydrates around the enzyme give unique properties to a distinct part of the surface of the asco-laccases which may have implication for laccase function–in particular towards large substrates.

Bacterial laccases: promising biological green tools for industrial applications

Multicopper oxidases (MCOs) are a pervasive family of enzymes that oxidize a wide range of phenolic and nonphenolic aromatic substrates, concomitantly with the reduction of dioxygen to water. MCOs are usually divided into two functional classes: metalloxidases and laccases. Given their broad substrate specificity and eco-friendliness (molecular oxygen from air as is used as the final electron acceptor and they only release water as byproduct), laccases are regarded as promising biological green tools for an array of applications. Among these laccases, those of bacterial origin have attracted research attention because of their notable advantages, including broad substrate spectrum, wide pH range, high thermostability, and tolerance to alkaline environments. This review aims to summarize the significant research efforts on the properties, mechanisms and structures, laccase-mediator systems, genetic engineering, immobilization, and biotechnological applications of the bacteria-source laccases and laccase-like enzymes, which principally include Bacillus laccases, actinomycetic laccases and some other species of bacterial laccases. In addition, these enzymes may offer tremendous potential for environmental and industrial applications.

Activity enhancement of CotA laccase by hydrophilic engineering, histidine tag optimization and static culture

CotA protein from Bacillus subtilis is of laccase activity. The solubility of recombinant CotA is low, which hinders its application. In this study, histidine tag position optimization and hydrophilic engineering were applied to increase the yield and activity of CotA protein. The results showed that the protein yield of CotA with his tag at C-terminal (CH6-CotA) was four times of that of NH6-CotA (His tag at N-terminal). Then, 23 single mutants were constructed by substitutions of hydrophobic residues with hydrophilic amino acids. Among them, the protein yield of the mutant F207Y was increased by 30%; the catalytic activity (kcat/Km) of V403T and P455S was two and three times higher than that of CH6-CotA, respectively. Finally, triple mutant F2071Y/V403T/P455S with C-terminal his-tag (CH6-TSY) was constructed. When the proteins were expressed in microanaerobic condition, the activities of mutants CH6-P455S and CH6-TSY were enhanced about 48- and 42-folds compared to that of NH6-CotA in non-static culture.