Bioelectrical enhancement in tissue-electrode coupling with metamorphic-stage insertions for insect machine interfaces

Locomotion Control of Cyborg Insects by Charge-Balanced Biphasic Electrical Stimulation

The integration of electronic stimulation devices with insects in the context of cyborg insect systems has great application potential, particularly in the fields of environmental monitoring, urban surveillance, and rescue missions. Despite considerable advantages compared to the current robot technology, including flexibility, durability, and low energy consumption, this integration faces certain challenges related to the potential risk of charge accumulation caused by prolonged and repetitive electrical stimulations. To address these challenges, this study proposes a universal system for remote signal output control using infrared signals. The proposed system integrates high-precision digital-to-analog converters capable of generating customized waveform electrical stimulation signals within defined ranges. This enhances the accuracy of locomotion control in cyborg insects while maintaining real-time control and dynamic parameter adjustment. The proposed system is verified by experiments. The experimental results show that the signals generated by the proposed system have a success rate of over 76.25% in controlling the turning locomotion of cyborg insects, which is higher than previously reported results. In addition, the charge-balanced characteristics of these signals can minimize muscle tissue damage, thus substantially enhancing control repeatability. This study provides a comprehensive solution for the remote control and monitoring of cyborg insects, whose flexibility and adaptability can meet various application and experimental requirements. The results presented in this study lay a robust foundation for further advancement of various technologies, particularly those related to cyborg insect locomotion control systems and wireless control mechanisms for cyborg insects.

Polymer interdigitated pillar electrostatic (PIPE) actuators

This work reports a three-dimensional polymer interdigitated pillar electrostatic actuator that can produce force densities 5-10× higher than those of biological muscles. The theory of operation, scaling, and stability is investigated using analytical and FEM models. The actuator consists of two high-density arrays of interdigitated pillars that work against a restoring force generated by an integrated flexure spring. The actuator architecture enables linear actuation with higher displacements and pull-in free actuation to prevent the in-use stiction associated with other electrostatic actuators. The pillars and springs are 3D printed together in the same structure. The pillars are coated with a gold-palladium alloy layer to form conductive electrodes. The space between the pillars is filled with liquid dielectrics for higher breakdown voltages and larger electrostatic forces due to the increase in the dielectric constant. We demonstrated a prototype actuator that produced a maximum work density of 54.6 µJ/cc and an electrical-to-mechanical energy coupling factor of 32% when actuated at 4000 V. The device was operated for more than 100,000 cycles with no degradation in displacements. The flexible polymer body was robust, allowing the actuator to operate even after high mechanical force impact, which was demonstrated by operation after drop tests. As it is scaled further, the reported actuator will enable soft and flexible muscle-like actuators that can be stacked in series and parallel to scale the resulting forces. This work paves the way for high-energy density actuators for microrobotic applications.

In vitro electrochemical assessment of electrodes for neurostimulation in roach biobots

Biobotics investigates the use of live insects as biological robots whose locomotion can be controlled by neurostimulation through implanted electrodes. Inactivity in the biobots (biological robots) can sometimes be noticed following extended neurostimulation, partly owing to incompatibility of implanted electrodes with the biobotic application or gradual degradation of the tissue-electrode interface. Implanted electrodes need to sufficiently exhibit consistent, reliable, and stable performance during stimulation experiments, have low tissue-electrode impedance, facilitate good charge injection capacity, and be compact in size or shape. Towards the goal of finding such electrodes suitable for biobotic applications, we compare electrochemical performances of five different types of electrodes in vitro with a saline based electrolytic medium. These include stainless steel wire electrodes, microfabricated flexible gold electrodes coated with PEDOT:PSS conductive polymer, eutectic gallium indium (EGaIn) in a tube, and “hybrid” stainless steel electrodes coated with EGaIn. We also performed accelerated aging of the electrodes to help estimate their longitudinal performance. Based on our experimentation, microfabricated electrodes with PEDOT:PSS and stainless steel electrodes coated with EGaIn performed remarkably well. This is the first time conductive polymer and liquid metal electrodes were studied comparatively for neurostimulation applications. These in vitro comparison results will be used in the future to provide a benchmark for subsequent in vivo tests with implanted electrodes in cockroach biobots.

Using liquid metal alloy (EGaIn) to electrochemically enhance SS stimulation electrodes for biobotic applications

Biobotics is an emerging and useful advent in the field of robotics which harnesses the mechanical power of live invertebrates and benefits from them as "working" animals. Most biobotic applications rely on neural or muscular stimulation through implanted electrodes for achieving direct control of their locomotory behavior. Degradation of stimulation efficiency is often noticed through extended usage, partly owing to incompatibility of implanted electrodes to the application. Our previous achievements in biobotics utilized commercially available stainless steel wires as stimulation electrodes due to its availability and lower cost. In this study, we look into the potential of using a liquid metal alloy, eutectic gallium-indium (EGaIn), as a means of enhancing properties of the stainless steel electrodes and its first time consideration as in vivo neurostimulation electrodes. We present in vitro analysis of the electrodes in terms of the electrolyte-electrode interface impedance and interface equivalent circuit model.

Kinect-based system for automated control of terrestrial insect biobots

Centimeter scale mobile biobots offer unique advantages in uncertain environments. Our previous experimentation has demonstrated neural stimulation techniques in order to control the motion of Madagascar hissing cockroaches. These trials relied on stimulation by a human operator using a remote control. We have developed a Kinect-based system for computer operated automatic control of cockroaches. Using image processing techniques and a radio transmitter, this platform both detects the position of the roach biobot and sends stimulation commands to an implanted microcontroller-based receiver. The work presented here enables repeatable experimentation and allows precise quantification of the line following capabilities of the roach biobot. This system will help refine our model for the stimulation response of the insect and improve our ability to direct them in increasingly dynamic situations.

Towards fenceless boundaries for solar powered insect biobots

Demonstration of remote navigation with instrumented insects, such as the Madagascar Hissing Cockroach, Gromphadorhina portentosa, has enabled the concept of biobotic agents for search and rescue missions and environmental monitoring applications. The biobots can form the nodes of a mobile sensor network to be established, for example, in unknown and dynamic environments after natural disasters to pinpoint surviving victims. We demonstrate here, for the first time, the concept of an invisible fence for insect biobots with an ultimate goal of keeping insect biobots within a certain distance of each other or a base station to ensure a reliable wireless network. For extended mission durations, this fenceless boundary would also be used to guide insects towards light sources for autonomous solar charging of their on-board batteries.

Line following terrestrial insect biobots

The present day technology falls short in offering centimeter scale mobile robots that can function effectively under unknown and dynamic environmental conditions. Insects, on the other hand, exhibit an unmatched ability to navigate through a wide variety of environments and overcome perturbations by successfully maintaining control and stability. In this study, we use neural stimulation systems to wirelessly navigate cockroaches to follow lines to enable terrestrial insect biobots. We also propose a system-on-chip based ZigBee enabled wireless neurostimulation backpack system with on-board tissue-electrode bioelectrical coupling verification. Such a capability ensures an electrochemically safe stimulation and avoids irreversible damage to the interface which is often misinterpreted as habituation of the insect to the applied stimulation.

Electromagnetic levitation platform for wireless study of insect flight neurophysiology

An electromagnetic levitation platform for use in a light emitting diode (LED) arena based virtual reality environment was developed for wireless recording of neural and neuromuscular signals from the flight related muscle groups in Manduca sexta. The platform incorporates the use of Early Metamorphosis Insertion Technology to implant recording electrodes into the flight muscles of late stage pupal moths. Analysis of the insects' response to changes in the LED arena rotation direction indicate that this setup could be used to perform a variety of flight behavior studies during yaw maneuvers.