Design and Evaluation of an Intelligent Remote Tidal Volume Variability Monitoring System in E-Health Applications

Development and Testing of a Data Capture Device for Use With Clinical Incentive Spirometers: Testing and Usability Study

BACKGROUND

The incentive spirometer is a basic and common medical device from which electronic health care data cannot be directly collected. As a result, despite numerous studies investigating clinical use, there remains little consensus on optimal device use and sparse evidence supporting its intended benefits such as prevention of postoperative respiratory complications.

OBJECTIVE

The aim of the study is to develop and test an add-on hardware device for data capture of the incentive spirometer.

METHODS

An add-on device was designed, built, and tested using reflective optical sensors to identify the real-time location of the volume piston and flow bobbin of a common incentive spirometer. Investigators manually tested sensor level accuracies and triggering range calibrations using a digital flowmeter. A valid breath classification algorithm was created and tested to determine valid from invalid breath attempts. To assess real-time use, a video game was developed using the incentive spirometer and add-on device as a controller using the Apple iPad.

RESULTS

In user testing, sensor locations were captured at an accuracy of 99% (SD 1.4%) for volume and 100% accuracy for flow. Median and average volumes were within 7.5% (SD 6%) of target volume sensor levels, and maximum sensor triggering values seldom exceeded intended sensor levels, showing a good correlation to placement on 2 similar but distinct incentive spirometer designs. The breath classification algorithm displayed a 100% sensitivity and a 99% specificity on user testing, and the device operated as a video game controller in real time without noticeable interference or delay.

CONCLUSIONS

An effective and reusable add-on device for the incentive spirometer was created to allow the collection of previously inaccessible incentive spirometer data and demonstrate Internet-of-Things use on a common hospital device. This design showed high sensor accuracies and the ability to use data in real-time applications, showing promise in the ability to capture currently inaccessible clinical data. Further use of this device could facilitate improved research into the incentive spirometer to improve adoption, incentivize adherence, and investigate the clinical effectiveness to help guide clinical care.

Cardiorespiratory Assessments in Panic Disorder Facilitated by Wearable Devices: A Systematic Review and Brief Comparison of the Wearable Zephyr BioPatch with the Quark-b2 Stationary Testing System

Abnormalities in cardiorespiratory measurements have repeatedly been found in patients with panic disorder (PD) during laboratory-based assessments. However, recordings performed outside laboratory settings are required to test the ecological validity of these findings. Wearable devices, such as sensor-imbedded garments, biopatches, and smartwatches, are promising tools for this purpose. We systematically reviewed the evidence for wearables-based cardiorespiratory assessments in PD by searching for publications on the PubMed, PsycINFO, and Embase databases, from inception to 30 July 2022. After the screening of two-hundred and twenty records, eight studies were included. The limited number of available studies and critical aspects related to the uncertain reliability of wearables-based assessments, especially concerning respiration, prevented us from drawing conclusions about the cardiorespiratory function of patients with PD in daily life. We also present preliminary data on a pilot study conducted on volunteers at the Villa San Benedetto Menni Hospital for evaluating the accuracy of heart rate (HR) and breathing rate (BR) measurements by the wearable Zephyr BioPatch compared with the Quark-b2 stationary testing system. Our exploratory results suggested possible BR and HR misestimation by the wearable Zephyr BioPatch compared with the Quark-b2 system. Challenges of wearables-based cardiorespiratory assessment and possible solutions to improve their reliability and optimize their significant potential for the study of PD pathophysiology are presented.

Comparison between Two Time Synchronization and Data Alignment Methods for Multi-Channel Wearable Biosensor Systems Using BLE Protocol

Wireless wearable sensor systems for biomedical signal acquisition have developed rapidly in recent years. Multiple sensors are often deployed for monitoring common bioelectric signals, such as EEG (electroencephalogram), ECG (electrocardiogram), and EMG (electromyogram). Compared with ZigBee and low-power Wi-Fi, Bluetooth Low Energy (BLE) can be a more suitable wireless protocol for such systems. However, current time synchronization methods for BLE multi-channel systems, via either BLE beacon transmissions or additional hardware, cannot satisfy the requirements of high throughput with low latency, transferability between commercial devices, and low energy consumption. We developed a time synchronization and simple data alignment (SDA) algorithm, which was implemented in the BLE application layer without the need for additional hardware. We further developed a linear interpolation data alignment (LIDA) algorithm to improve upon SDA. We tested our algorithms using sinusoidal input signals at different frequencies (10 to 210 Hz in increments of 20 Hz-frequencies spanning much of the relevant range of EEG, ECG, and EMG signals) on Texas Instruments (TI) CC26XX family devices, with two peripheral nodes communicating with one central node. The analysis was performed offline. The lowest average (±standard deviation) absolute time alignment error between the two peripheral nodes achieved by the SDA algorithm was 384.3 ± 386.5 μs, while that of the LIDA algorithm was 189.9 ± 204.7 μs. For all sinusoidal frequencies tested, the performance of LIDA was always statistically better than that of SDA. These average alignment errors were quite low-well below one sample period for commonly acquired bioelectric signals.

Towards Wearable Estimation of Tidal Volume via Electrocardiogram and Seismocardiogram Signals

The current COVID-19 pandemic highlights the critical importance of ubiquitous respiratory health monitoring. The two fundamental elements of monitoring respiration are respiration rate (the frequency of breathing) and tidal volume (TV, the volume of air breathed by the lungs in each breath). Wearable sensing systems have been demonstrated to provide accurate measurement of respiration rate, but TV remains challenging to measure accurately with wearable and unobtrusive technology. In this work, we leveraged electrocardiogram (ECG) and seismocardiogram (SCG) measurements obtained with a custom wearable sensing patch to derive an estimate of TV from healthy human participants. Specifically, we fused both ECG-derived and SCG-derived respiratory signals (EDR and SDR) and trained a machine learning model with gas rebreathing as the ground truth to estimate TV. The respiration cycle modulates ECG and SCG signals in multiple different ways that are synergistic. Thus, here we extract EDRs and SDRs using a multitude of different demodulation techniques. The extracted features are used to train a subject independent machine learning model to accurately estimate TV. By fusing the extracted EDRs and SDRs, we were able to estimate the TV with a root-mean-square error (RMSE) of 181.45 mL and Pearson correlation coefficient (r) of 0.61, with a global subject-independent model. We further show that SDRs are better TV estimators than EDRs. Among SDRs, amplitude modulated (AM) SCG features are the most correlated to TV. We demonstrated that fusing EDRs and SDRs can result in moderately accurate estimation of TV using a subject-independent model. Additionally, we highlight the most informative features for estimating TV. This work presents a significant step towards achieving continuous, calibration free, and unobtrusive TV estimation, which could advance the state of the art in wearable respiratory monitoring.

Towards breath sensors that are self-powered by design

Piezoelectric materials are widely used to generate electric charge from mechanical deformation or vice versa. These strategies are increasingly common in implantable medical devices, where sensing must be done on small scales. In the case of a flow rate sensor, a sensor's energy harvesting rate could be mapped to that flow rate, making it 'self-powered by design (SPD)'. Prior fluids-based SPD work has focused on turbulence-driven resonance and has been largely empirical. Here, we explore the possibility of sub-resonant SPD flow sensing in a human airway. We present a physical model of piezoelectric sensing/harvesting in the airway, which we validated with a benchtop experiment. Our work offers a model-based roadmap for implantable SPD sensing solutions. We also use the model to theorize a new form of SPD sensing that can detect broadband flow information.

Estimation of Tidal Volume Using Load Cells on a Hospital Bed

Although respiratory failure is one of the primary causes of admission to intensive care, the importance placed on measurement of respiratory parameters is commonly overshadowed compared to cardiac parameters. With the increased demand for unobtrusive yet quantifi- able respiratory monitoring, many technologies have been proposed recently. However, there are challenges to be addressed for such technologies to enable widespread use. In this work, we explore the feasibility of using load cell sensors embedded on a hospital bed for monitoring respi- ratory rate (RR) and tidal volume (TV). We propose a globalized machine learning (ML)-based algorithm for estimating TV without the requirement of subject-specific calibration or training. In a study of 15 healthy subjects performing respiratory tasks in four different postures, the outputs from four load cell channels and the reference spirometer were recorded simultaneously. A signal processing pipeline was implemented to extract features that capture respira- tory movement and the respiratory effects on the cardiac (i.e., ballistocardiogram, BCG) signals. The proposed RR estimation algorithm achieved a root mean square error (RMSE) of 0.6 breaths per minute (brpm) against the ground truth RR from the spirometer. The TV estimation results demonstrated that combining all three axes of the low- frequency force signals and the BCG heartbeat features best quantifies the respiratory effects of TV. The model resulted in a correlation and RMSE between the estimated and true TV values of 0.85 and 0.23 L, respectively, in the posture independent model without electrocardiogram (ECG) signals. This study suggests that load cell sensors already existing in certain hospital beds can be used for convenient and continuous respiratory monitoring in general care settings.

Contactless Monitoring of Breathing Pattern and Thoracoabdominal Asynchronies in Preterm Infants Using Depth Cameras: A Feasibility Study

Objective: Monitoring infants’ breathing activity is crucial in research and clinical applications but remains a challenge. This study aims to develop a contactless method to monitor breathing patterns and thoracoabdominal asynchronies in infants inside the incubator, using depth cameras. Methods: We proposed an algorithm to extract the 3D displacements of the ribcage and abdomen from the analysis of depth images. We evaluated the accuracy of the system in-vitro vs. a reference motion capture analyzer. We also conducted a feasibility study on 12 patients receiving non-invasive respiratory support to estimate the mean and the variability of the chest wall displacements in preterm infants and evaluate the suitability of the proposed system in the clinical setting. Results: In-vitro, the mean (95% CI) error in the measurement of amplitude, frequency and phase shift between compartmental displacements was −0.14 (−0.57, 0.28) mm, 0.02 (−0.99, 1.03) bpm, and −0.40 (−1.76, 0.95)°, respectively. In-vivo, the mean (95% CI) amplitude of the ribcage and abdomen displacements were 0.99 (0.34, 2.67) mm and 1.20 (0.40, 2.15) mm, respectively. Conclusions: The developed system proved accurate in-vitro and was suitable for the clinical environment. Clinical Impact: The proposed method has value for evaluating infants’ breathing patterns in research applications and, after further development, may represent a simple monitoring tool for infants’ respiratory activity inside the incubator.

Smart Mandibular Advancement Device for Intraoral Monitoring of Cardiorespiratory Parameters and Sleeping Postures

Obstructive sleep apnea (OSA), as a highly prevalent sleep disorder, causes several serious health complaints. It has been proved that using intraoral mandibular advancement devices (MADs) during sleep is an efficient treatment for OSA. However, due to limited number of sleep study laboratories, effectiveness of MAD therapy is not regularly monitored. This paper proposes a smart MAD with the capability of continuously monitoring of cardiorespiratory parameters as well as sleeping postures and breathing routes. In this regard, a flexible hybrid wireless sensing platform based on the intraoral photoplethysmography (PPG), temperature and accelerometry monitoring is developed. It is qualitatively and quantitatively discussed that the intraorally captured PPG signals by the smart MAD have similar features as the ones received from the conventional anatomical position, i.e., the left index fingertip. Extensive experimental measurements indicate that the proposed smart MAD can estimate heart-rate (HR), respiration rate (RR) and blood oxygen saturation (SpO₂) with the maximum mean-absolute-errors of 2.4 bpm, 2.52 breaths/min, and 0.8%, respectively, in comparison to the reference measurements, while such a capability is not dependent on subject's positions and breathing routes. It is also shown that the smart MAD can readily identify different sleeping postures, namely, supine, left, right, and prone and breathing routes. The reliability and stability of the proposed smart MAD's measurements are proved by examining a group of subjects. The proposed smart MAD has potential to monitor the effectiveness of MAD treatment and eliminate untreated OSA without the requirement of attaching an extra monitoring platform to the patient's body.

Improved particle swarm optimization algorithm for high performance SPR sensor design

The surface plasmon resonance (SPR) sensor offers high sensitivity, good stability, simple structure, and is label-free. However, optimizing a multi-layered structure is quite time-consuming within the SPR sensor design process. Moreover, it is easy to overlook optimal design when using the conventional parameter sweeping method. In this paper, the improved particle swarm optimization (IPSO) algorithm with high global optimal solution convergence speed is applied for this purpose. Based on the IPSO algorithm, the SPR sensor with transition metal dichalcogenides (TMDCs) and graphene composite is proposed and optimized. The results show that the best Ag-ITO-WS₂-graphene hybrid structure can be found by the IPSO algorithm, and the maximum sensitivity is 137.4°/RIU, and the figure of merit (FOM) is 5.25RIU^-1. Compared with the standard particle swarm optimization algorithm, the number of iterations can be reduced. The development of the SPR sensor provides an optimization platform, which enormously improves the development efficiency of the multi-layer SPR sensor.

The Importance of Respiratory Rate Monitoring: From Healthcare to Sport and Exercise

Respiratory rate is a fundamental vital sign that is sensitive to different pathological conditions (e.g., adverse cardiac events, pneumonia, and clinical deterioration) and stressors, including emotional stress, cognitive load, heat, cold, physical effort, and exercise-induced fatigue. The sensitivity of respiratory rate to these conditions is superior compared to that of most of the other vital signs, and the abundance of suitable technological solutions measuring respiratory rate has important implications for healthcare, occupational settings, and sport. However, respiratory rate is still too often not routinely monitored in these fields of use. This review presents a multidisciplinary approach to respiratory monitoring, with the aim to improve the development and efficacy of respiratory monitoring services. We have identified thirteen monitoring goals where the use of the respiratory rate is invaluable, and for each of them we have described suitable sensors and techniques to monitor respiratory rate in specific measurement scenarios. We have also provided a physiological rationale corroborating the importance of respiratory rate monitoring and an original multidisciplinary framework for the development of respiratory monitoring services. This review is expected to advance the field of respiratory monitoring and favor synergies between different disciplines to accomplish this goal.

Relationship of the Respiration Waveform to a Chest Worn Inertial Sensor

Demand of portable health monitoring has been growing due to increasing cardiovascular and respiratory diseases. While both cardiovascular monitoring and respiratory monitoring have been developed independently, there lacks a simple integrated solution to monitor both simultaneously. Seismocardiography (SCG), a method of recording cardiac vibrations with an accelerometer can also be used to extract respiratory information via low frequency chest oscillations. This study used an inertial measurement unit which pairs a 3-axis accelerometer and a 3-axis gyroscope to monitor respiration while maintaining optimum placement protocol for recording SCG. Additionally, the connection between inertial measurement and both respiratory rate and volume were explored based on their correlation with a Spirometer. Respiratory volume was shown to have moderate correlation with chest motion with an average best-case correlation coefficient of 0.679 across acceleration and gyration. The techniques described will assist the design of future SCG algorithms by understanding the sources behind their modulation from respiration. This paper shows that a simplified processing technique can be added to SCG algorithms for respiration monitoring.

Measuring diaphragm movement and respiratory frequency using a novel ultrasound device in healthy volunteers

PURPOSE

To evaluate the ability of a novel ultrasound (US) device, DiaMon, to monitor diaphragm movement via its proxy liver movement, and compare it with the respired flow measured with a flowmeter, in awake and healthy volunteers. We wanted to (1) establish the optimal anatomical position for attaching the DiaMon device to the abdominal wall, and (2) evaluate the accuracy of continuous monitoring of respiratory frequency.

METHODS

Thirty healthy subjects were recruited. The DiaMon probe was applied subcostally in four different positions with the subjects in five different postures. The subjects breathed tidal volumes into a spirometer for 30-60 s with the DiaMon recording simultaneously.

RESULTS

The device detected a readable signal in 83-100% of the position/posture-combinations. The technical correlation between the two signals was highest in the anterior axillary-supine position (mean ± SD: 0.95 ± 0.03), followed by paramidline-supine (0.90 ± 0.09) and midclavicular-supine (0.89 ± 0.12). The frequency measurements yielded a mean difference of 0.03 (95% limits of agreement - 0.11, 0.16) breaths per minute in the anterior axillary-supine position.

CONCLUSION

The DiaMon device is able to detect liver movement in most subjects, and it measures breathing frequency accurately.

An Ultrasound-Based Biomedical System for Continuous Cardiopulmonary Monitoring: A Single Sensor for Multiple Information

Biomedical wearable sensors enable long-term monitoring applications and provide instantaneous diagnostic capabilities. Physiological monitoring can help in both the diagnosis and the ongoing treatment of a vast number of cardiovascular and pulmonary diseases such as hypertension, dysrhythmia, and asthma. In this paper, we present a system capable of monitoring several vital signals and physiological variables that determine the cardiopulmonary activity status. We explore direct measurements of multiple vital parameters with only one sensor and without special constraints. The system employs a PZT-4 piezo transducer stimulated by a suitable analog front end. The system both generates pulsed ultrasound waves at 1 MHz and amplifies reflected echoes to track internal organ motions, mainly that of the heart apex. According to the respiratory motion of the heart, the proposed system provides respiratory and heart cycles information. Promising results were obtained from six subjects with an average accuracy of 96.7% in heartbeats per minute measurement, referenced to a commercial photoplethysmography sensor. It also exhibits 94.5% sensitivity and 94.0% specificity in respiration detection compared to a spirometer signal as a reference.

Estimation of respiratory variables from thoracoabdominal breathing distance: a review of different techniques and calibration methods

The precise measurement of respiratory variables, such as tidal volume, minute ventilation, and respiratory rate, is necessary to monitor respiratory status, overcome several diseases, improve patient health conditions and reduce health care costs. This measurement has conventionally been performed by breathing into a mouthpiece connected to a flow rate measuring device. However, a mouthpiece can be uncomfortable for the subject and is difficult to use for long-term monitoring. Other noninvasive systems and devices have been developed that do not require a mouthpiece to quantitatively measure respiratory variables. These techniques are based on measuring size changes of the rib cage (RC) and abdomen (ABD), as lung volume is known to be a function of these variables. Among these systems, we distinguish respiratory inductive plethysmography (RIP), respiratory magnetometer plethysmography (RMP), and optoelectronic plethysmography devices. However, these devices should be previously calibrated for the correct evaluation of respiratory variables. The most popular calibration methods are isovolume manoeuvre calibration (ISOCAL), qualitative diagnostic calibration (QDC), multiple linear regression (MLR) and artificial neural networks (ANNs). The aim of this review is first to present how thoracoabdominal breathing distances can be used to estimate respiratory variables and second to present the different techniques and calibration methods used for this purpose.

A Survey of Healthcare Monitoring Systems for Chronically Ill Patients and Elderly

The demand of healthcare systems for chronically ill patients and elderly has increased in the last few years. This demand is derived by the necessity to allow patients and elderly to be independent in their homes without the help of their relatives or caregivers. The prosperity of the information technology plays an essential role in healthcare by providing continuous monitoring and alerting mechanisms. In this paper, we survey the most recent applications in healthcare monitoring. We organize the applications into categories and present their common architecture. Moreover, we explain the standards used and challenges faced in this field. Finally, we make a comparison between the presented applications and discuss the possible future research paths.

Respiratory Waveform Estimation From Multiple Accelerometers: An Optimal Sensor Number and Placement Analysis

Respiratory patterns are commonly measured to monitor and diagnose cardiovascular, metabolic, and sleep disorders. Electronic devices such as masks used to record respiratory waveforms usually require medical staff support and obstruct the patients' breathing, causing discomfort. New techniques are being investigated to overcome such limitations. An emerging approach involves accelerometers to estimate the respiratory waveform based on chest motion. However, most of the existing techniques employ a single accelerometer placed on an arbitrary thorax position. The present work investigates the use and optimal placement of multiple accelerometers located on the thorax and the abdomen. The study population is composed of 30 healthy volunteers in three different postures. By means of a custom-made microcontrolled system, data are acquired from an array of ten accelerometers located on predefined positions and a pneumotachograph used as reference. The best sensor locations are identified by optimal linear reconstruction of the reference waveform from the accelerometer data in the minimum mean square error sense. The analysis shows that right-hand side locations contribute more often to optimal respiratory waveform estimates, a sound finding given that the right lung has a larger volume than the left lung. In addition, we show that the respiratory waveform can be blindly extracted from the recorded accelerometer data by means of independent component analysis. In conclusion, linear processing of multiple accelerometers in optimal positions can successfully recover respiratory information in clinical settings, where the use of masks may be contraindicated.

Ultrasound Sensors for Diaphragm Motion Tracking: An Application in Non-Invasive Respiratory Monitoring

This paper introduces a novel respiratory detection system based on diaphragm wall motion tracking using an embedded ultrasound sensory system. We assess the utility and accuracy of this method in evaluating the function of the diaphragm and its contribution to respiratory workload. The developed system is able to monitor the diaphragm wall activity when the sensor is placed in the zone of apposition (ZOA). This system allows for direct measurements with only one ultrasound PZT5 piezo transducer. The system generates pulsed ultrasound waves at 2.2 MHz and amplifies reflected echoes. An added benefit of this system is that due to its design, the respiratory signal is less subject to motion artefacts. Promising results were obtained from six subjects performing six tests per subject with an average respiration detection sensitivity and specificity of 84% and 93%, respectively. Measurements were compared to a gold standard commercial spirometer. In this study, we also compared our measurements to other conventional methods such as inertial and photoplethysmography (PPG) sensors.

Performance Evaluation of Bluetooth Low Energy: A Systematic Review

Small, compact and embedded sensors are a pervasive technology in everyday life for a wide number of applications (e.g., wearable devices, domotics, e-health systems, etc.). In this context, wireless transmission plays a key role, and among available solutions, Bluetooth Low Energy (BLE) is gaining more and more popularity. BLE merges together good performance, low-energy consumption and widespread diffusion. The aim of this work is to review the main methodologies adopted to investigate BLE performance. The first part of this review is an in-depth description of the protocol, highlighting the main characteristics and implementation details. The second part reviews the state of the art on BLE characteristics and performance. In particular, we analyze throughput, maximum number of connectable sensors, power consumption, latency and maximum reachable range, with the aim to identify what are the current limits of BLE technology. The main results can be resumed as follows: throughput may theoretically reach the limit of ~230 kbps, but actual applications analyzed in this review show throughputs limited to ~100 kbps; the maximum reachable range is strictly dependent on the radio power, and it goes up to a few tens of meters; the maximum number of nodes in the network depends on connection parameters, on the network architecture and specific device characteristics, but it is usually lower than 10; power consumption and latency are largely modeled and analyzed and are strictly dependent on a huge number of parameters. Most of these characteristics are based on analytical models, but there is a need for rigorous experimental evaluations to understand the actual limits.

The Ultrasonic Directional Tidal Breathing Pattern Sensor: Equitable Design Realization Based on Phase Information

Pulmonary ailments are conventionally diagnosed by spirometry. The complex forceful breathing maneuver as well as the extreme cost of spirometry renders it unsuitable in many situations. This work is aimed to facilitate an emerging direction of tidal breathing-based pulmonary evaluation by designing a novel, equitable, precise and portable device for acquisition and analysis of directional tidal breathing patterns, in real time. The proposed system primarily uses an in-house designed blow pipe, 40-kHz air-coupled ultrasound transreceivers, and a radio frequency (RF) phase-gain integrated circuit (IC). Moreover, in order to achieve high sensitivity in a cost-effective design philosophy, we have exploited the phase measurement technique, instead of selecting the contemporary time-of-flight (TOF) measurement; since application of the TOF principle in tidal breathing assessments requires sub-micro to nanosecond time resolution. This approach, which depends on accurate phase measurement, contributed to enhanced sensitivity using a simple electronics design. The developed system has been calibrated using a standard 3-L calibration syringe. The parameters of this system are validated against a standard spirometer, with maximum percentage error below 16%. Further, the extracted respiratory parameters related to tidal breathing have been found to be comparable with relevant prior works. The error in detecting respiration rate only is 3.9% compared to manual evaluation. These encouraging insights reveal the definite potential of our tidal breathing pattern (TBP) prototype for measuring tidal breathing parameters in order to extend the reach of affordable healthcare in rural regions and developing areas.

Estimation of respiratory volume from thoracoabdominal breathing distances: comparison of two models of machine learning

PURPOSE

The purposes of this study were to both improve the accuracy of respiratory volume (V) estimates using the respiratory magnetometer plethysmography (RMP) technique and facilitate the use of this technique.

METHOD

We compared two models of machine learning (ML) for estimating [Formula: see text]: a linear model (multiple linear regression-MLR) and a nonlinear model (artificial neural network-ANN), and we used cross-validation to validate these models. Fourteen healthy adults, aged [Formula: see text] years participated in the present study. The protocol was conducted in a laboratory test room. The anteroposterior displacements of the rib cage and abdomen, and the axial displacements of the chest wall and spine were measured using two pairs of magnetometers. [Formula: see text] was estimated from these four signals, and the respiratory volume was simultaneously measured using a spirometer ([Formula: see text]) under lying, sitting and standing conditions as well as various exercise conditions (working on computer, treadmill walking at 4 and 6 km[Formula: see text], treadmill running at 9 and 12  km [Formula: see text] and ergometer cycling at 90 and 110 W).

RESULTS

The results from the ANN model fitted the spirometer volume significantly better than those obtained through MLR. Considering all activities, the difference between [Formula: see text] and [Formula: see text] (bias) was higher for the MLR model ([Formula: see text] L) than for the ANN model ([Formula: see text] L).

CONCLUSION

Our results demonstrate that this new processing approach for RMP seems to be a valid tool for estimating V with sufficient accuracy during lying, sitting and standing and under various exercise conditions.