Motion Sensor-Based Assessment of Parkinson's Disease Motor Symptoms During Leg Agility Tests: Results From Levodopa Challenge

Kinect-based objective assessment of the acute levodopa challenge test in parkinsonism: a feasibility study

INTRODUCTION

The acute levodopa challenge test (ALCT) is an important and valuable examination but there are still some shortcomings with it. We aimed to objectively assess ALCT based on a depth camera and filter out the best indicators.

METHODS

Fifty-nine individuals with parkinsonism completed ALCT and the improvement rate (IR, which indicates the change in value before and after levodopa administration) of the Movement Disorder Society-Sponsored Revision of the Unified Parkinson's Disease Rating Scale part III (MDS-UPDRS III) was calculated. The kinematic features of the patients' movements in both the OFF and ON states were collected with an Azure Kinect depth camera.

RESULTS

The IR of MDS-UPDRS III was significantly correlated with the IRs of many kinematic features for arising from a chair, pronation-supination movements of the hand, finger tapping, toe tapping, leg agility, and gait (rs =  - 0.277 ~  - 0.672, P < 0.05). Moderate to high discriminative values were found in the selected features in identifying a clinically significant response to levodopa with sensitivity, specificity, and area under the curve (AUC) in the range of 50-100%, 47.22%-97.22%, and 0.673-0.915, respectively. The resulting classifier combining kinematic features of toe tapping showed an excellent performance with an AUC of 0.966 (95% CI = 0.922-1.000, P < 0.001). The optimal cut-off value was 21.24% with sensitivity and specificity of 94.44% and 87.18%, respectively.

CONCLUSION

This study demonstrated the feasibility of measuring the effect of levodopa and objectively assessing ALCT based on kinematic data derived from an Azure Kinect-based system.

Wearable Ring-Shaped Biomedical Device for Physiological Monitoring through Finger-Based Acquisition of Electrocardiographic, Photoplethysmographic, and Galvanic Skin Response Signals: Design and Preliminary Measurements

Wearable health devices (WHDs) are rapidly gaining ground in the biomedical field due to their ability to monitor the individual physiological state in everyday life scenarios, while providing a comfortable wear experience. This study introduces a novel wearable biomedical device capable of synchronously acquiring electrocardiographic (ECG), photoplethysmographic (PPG), galvanic skin response (GSR) and motion signals. The device has been specifically designed to be worn on a finger, enabling the acquisition of all biosignals directly on the fingertips, offering the significant advantage of being very comfortable and easy to be employed by the users. The simultaneous acquisition of different biosignals allows the extraction of important physiological indices, such as heart rate (HR) and its variability (HRV), pulse arrival time (PAT), GSR level, blood oxygenation level (SpO2), and respiratory rate, as well as motion detection, enabling the assessment of physiological states, together with the detection of potential physical and mental stress conditions. Preliminary measurements have been conducted on healthy subjects using a measurement protocol consisting of resting states (i.e., SUPINE and SIT) alternated with physiological stress conditions (i.e., STAND and WALK). Statistical analyses have been carried out among the distributions of the physiological indices extracted in time, frequency, and information domains, evaluated under different physiological conditions. The results of our analyses demonstrate the capability of the device to detect changes between rest and stress conditions, thereby encouraging its use for assessing individuals' physiological state. Furthermore, the possibility of performing synchronous acquisitions of PPG and ECG signals has allowed us to compare HRV and pulse rate variability (PRV) indices, so as to corroborate the reliability of PRV analysis under stationary physical conditions. Finally, the study confirms the already known limitations of wearable devices during physical activities, suggesting the use of algorithms for motion artifact correction.

Validation of inertial measurement units to detect and predict horse behaviour while stabled

BACKGROUND

Musculoskeletal injuries are observed in Thoroughbred racehorses and may become catastrophic. Currently, there are limited methods for early detection of such injuries. Most injuries develop gradually due to accumulated damage, providing the opportunity for early detection. Horses experiencing pain or lameness may exhibit changes in behaviour so the development of an objective, real-time system monitoring horse behaviour may enable detection of bone injuries before catastrophic failure.

OBJECTIVES

To determine whether intensive observational methods of assessing horse behaviour can be replaced by use of inertial measurement units (IMUs).

STUDY DESIGN

Validation study assessing IMU use against video observation.

METHODS

Six hospitalised Thoroughbreds (algorithm training data) and 19 Thoroughbred racehorses in-training (algorithm testing data) were equipped with an IMU placed on the lateral side of both forelimbs (left fore, LF; right fore, RF) and monitored in a stable for 4 h. An algorithm was developed to classify behaviour and then validated against video recordings.

RESULTS

Standing was the most prevalent behaviour (LF 88.8%, 95% confidence interval [CI] 88.7-89.0; RF 88.5%, 95% CI 88.4-88.7). IMU classification of recumbent and standing activities showed excellent agreement (sensitivity) with video observation (>98%). This was followed by stepping (LF 89.4%, RF 85.5%) then weight-shifting (LF 54.3%, RF 61.5%). Predictions from the algorithm showed misclassification of 2.5% (LF 5500/225 352, RF 5218/210 170). Excluding standing, misclassification was 6.8% (1705/25 158) and 7.5% (1812/24 077) for the left and right forelimbs, respectively, with pawing and weight-shifting most frequently misclassified.

MAIN LIMITATIONS

Increasing the number of horses and types of behaviours observed may improve predictions.

CONCLUSIONS

IMUs displayed a high sensitivity to movement on a small number of horses, and with further validation they have the potential to effectively monitor behaviour of racehorses in training. However, more sensitive methods may be needed to validate the classification of weight-shifting behaviour. Future studies should evaluate the association between each behaviour and musculoskeletal injury.

Wearable sensors and features for diagnosis of neurodegenerative diseases: A systematic review

Objective

Neurodegenerative diseases affect millions of families around the world, while various wearable sensors and corresponding data analysis can be of great support for clinical diagnosis and health assessment. This systematic review aims to provide a comprehensive overview of the existing research that uses wearable sensors and features for the diagnosis of neurodegenerative diseases.

Methods

A systematic review was conducted of studies published between 2015 and 2022 in major scientific databases such as Web of Science, Google Scholar, PubMed, and Scopes. The obtained studies were analyzed and organized into the process of diagnosis: wearable sensors, feature extraction, and feature selection.

Results

The search led to 171 eligible studies included in this overview. Wearable sensors such as force sensors, inertial sensors, electromyography, electroencephalography, acoustic sensors, optical fiber sensors, and global positioning systems were employed to monitor and diagnose neurodegenerative diseases. Various features including physical features, statistical features, nonlinear features, and features from the network can be extracted from these wearable sensors, and the alteration of features toward neurodegenerative diseases was illustrated. Moreover, different kinds of feature selection methods such as filter, wrapper, and embedded methods help to find the distinctive indicator of the diseases and benefit to a better diagnosis performance.

Conclusions

This systematic review enables a comprehensive understanding of wearable sensors and features for the diagnosis of neurodegenerative diseases.

Digital Devices for Assessing Motor Functions in Mobility-Impaired and Healthy Populations: Systematic Literature Review

Background

With the advent of smart sensing technology, mobile and wearable devices can provide continuous and objective monitoring and assessment of motor function outcomes.

Objective

We aimed to describe the existing scientific literature on wearable and mobile technologies that are being used or tested for assessing motor functions in mobility-impaired and healthy adults and to evaluate the degree to which these devices provide clinically valid measures of motor function in these populations.

Methods

A systematic literature review was conducted by searching Embase, MEDLINE, CENTRAL (January 1, 2015, to June 24, 2020), the United States and European Union clinical trial registries, and the United States Food and Drug Administration website using predefined study selection criteria. Study selection, data extraction, and quality assessment were performed by 2 independent reviewers.

Results

A total of 91 publications representing 87 unique studies were included. The most represented clinical conditions were Parkinson disease (n=51 studies), followed by stroke (n=5), Huntington disease (n=5), and multiple sclerosis (n=2). A total of 42 motion-detecting devices were identified, and the majority (n=27, 64%) were created for the purpose of health care–related data collection, although approximately 25% were personal electronic devices (eg, smartphones and watches) and 11% were entertainment consoles (eg, Microsoft Kinect or Xbox and Nintendo Wii). The primary motion outcomes were related to gait (n=30), gross motor movements (n=25), and fine motor movements (n=23). As a group, sensor-derived motion data showed a mean sensitivity of 0.83 (SD 7.27), a mean specificity of 0.84 (SD 15.40), a mean accuracy of 0.90 (SD 5.87) in discriminating between diseased individuals and healthy controls, and a mean Pearson r validity coefficient of 0.52 (SD 0.22) relative to clinical measures. We did not find significant differences in the degree of validity between in-laboratory and at-home sensor-based assessments nor between device class (ie, health care–related device, personal electronic devices, and entertainment consoles).

Conclusions

Sensor-derived motion data can be leveraged to classify and quantify disease status for a variety of neurological conditions. However, most of the recent research on digital clinical measures is derived from proof-of-concept studies with considerable variation in methodological approaches, and much of the reviewed literature has focused on clinical validation, with less than one-quarter of the studies performing analytical validation. Overall, future research is crucially needed to further consolidate that sensor-derived motion data may lead to the development of robust and transformative digital measurements intended to predict, diagnose, and quantify neurological disease state and its longitudinal change.

The impact of wearable electronics in assessing the effectiveness of levodopa treatment in Parkinsons disease

OBJECTIVE

In order to evaluate Parkinson disease patients response to therapeutic interventions, sources of information are mainly patient reports and clinicians assessment of motor functions. However, these sources can suffer from patients subjectivity and from inter/intra raters score variability. Our work aimed at determining the impact of wearable electronics and data analysis in objectifying the effectiveness of levodopa treatment.

METHODS

Seven motor tasks performed by thirty-six patients were measured by wearable electronics and related data were analyzed. This was at the time of therapy initiation (T0), and repeated after six (T1) and 12 months (T2). Wearable electronics consisted of inertial measurement units each equipped with 3-axis accelerometer and 3-axis gyroscope, while data analysis of ANOVA and Pearson correlation algorithms, in addition to a support vector machine (SVM) classification.

RESULTS

According to our findings, levodopa-based therapy alters the patients conditions in general, ameliorating something (e.g. bradykinesia), leaving unchanged others (e.g. tremor), but with poor correlation to the levodopa dose.

CONCLUSION

A technology-based approach can objectively assess levodopa-based therapy effectiveness.

SIGNIFICANCE

Novel devices can improve the accuracy of the assessment of motor function, by integrating the clinical evaluation and patient reports.

Predicting UPDRS Motor Symptoms in Individuals with Parkinsons Disease from Force Plates Using Machine Learning

Parkinsons disease (PD) is a neurodegenerative disease that affects motor abilities with increasing severity as the disease progresses. Traditional methods for diagnosing PD include a section where a trained specialist scores qualitative symptoms using the motor subscale of the Unified Parkinsons Disease Rating Scale (UPDRS-III). The aim of this feasibility study was twofold. First, to evaluate quiet standing as an additional, out-of-clinic, objective feature to predict UPDRS-III subscores related to motor symptom severity; and second, to use quiet standing to detect the presence of motor symptoms. Force plate data were collected from 42 PD patients and 43 healthy controls during quiet standing (a task involving standing still with eyes open and closed) as a feasible task in clinics. Predicting each subscore of the UPDRS-III could aid in identifying progression of PD and provide specialists additional tools to make an informed diagnosis. Random Forest feature importance indicated that features correlated with range of center of pressure (i.e. the medial-lateral and anterior-posterior sway) were most useful in the prediction of the top PD prediction subscores of postural stability (r = 0.599; p = 0.014), hand tremor of the left hand (r = 0.650; p = 0.015), and tremor at rest of the left upper extremity (r = 0.703; p = 0.016). Quiet standing can detect body bradykinesia (AUC-ROC = 0.924) and postural stability (AUC-ROC = 0.967) with high predictability. Although there are limited data, these results should be used as a feasibility study that evaluates the predictability of individual UPDRS-III subscores using quiet standing data.

Detection of hypomimia in patients with Parkinson's disease via smile videos

Background

Parkinson’s disease (PD) is a neurodegenerative disease characterized by the impairment of facial expression, known as hypomimia. Hypomimia has serious impacts on patients’ ability to communicate, and it is difficult to detect at early stages of the disease. Furthermore, due to bradykinesia or other reasons, it is inconvenient for PD patients to visit the hospital. Therefore, it is appealing to develop an auxiliary diagnostic method that remotely detects hypomimia.

Methods

We proposed an automatic detection system for Parkinson’s hypomimia based on facial expressions (DSPH-FE). DSPH-FE provides a convenient remote service for those who potentially suffer from hypomimia and only requires patients to input their facial videos. Specifically, patients can detect hypomimia through two aspects: geometric features and texture features. Geometric features focus on visually representing structures of facial muscles. Facial expression factors (FEFs) are used as the first metric to quantify the current activation state of the facial muscles. Facial expression change factors (FECFs) are subsequently used as the second metric to calculate the moving trajectories of the activation states in the videos. Geometric features primarily concentrate on spatial information, with little involvement of temporal information. Thus, the extended histogram of oriented gradients (HOG) algorithm is introduced. This algorithm can extract texture features within multiple continuous frames and incorporate the temporal information into the features. Finally, these features are applied to four machine learning algorithms to model the relationship between these features and hypomimia.

Results

The DSPH-FE detection system achieved the best performance when concatenating geometric features and texture features, resulting in a F1 score of 0.9997. The best F1 scores achieved with geometric features and texture features were 0.8286 and 0.9446, respectively. This indicated that both geometric features and texture features have an ability to predict hypomimia, and demonstrated that temporal information can boost the model performance. Thus, DSPH-FE is an effective supportive tool in the medical management of PD patients.

Conclusions

Comprehensive experiments demonstrated that proposed features fit well with real-world videos and are beneficial in the clinical diagnosis of hypomimia. In particular, hypomimia had a greater impact on eyes and mouths when patients are smiling.

Communication-Efficient Tracking of Unknown, Spatially Correlated Signals in Ad-Hoc Wireless Sensor Networks: Two Machine Learning Approaches

A low-cost machine learning (ML) algorithm is proposed and discussed for spatial tracking of unknown, correlated signals in localized, ad-hoc wireless sensor networks. Each sensor is modeled as one neuron and a selected subset of these neurons are called to identify the spatial signal. The algorithm is implemented in two phases of spatial modeling and spatial tracking. The spatial signal is modeled using its M iso-contour lines at levels {ℓj}j=1M and those sensors that their sensor observations are in Δ margin of any of these levels report their sensor observations to the fusion center (FC) for spatial signal reconstruction. In spatial modeling phase, the number of these contour lines, their levels and a proper Δ are identified. In this phase, the algorithm may either use adaptive-weight stochastic gradient or scaled stochastic gradient method to select a proper Δ. Additive white Gaussian noise (AWGN) with zero mean is assumed along with the sensor observations. To reduce the observation noise's effect, each sensor applies moving average filter on its observation to drastically reduce the effect of noise. The modeling performance, the cost and the convergence of the algorithm are discussed based on extensive computer simulations and reasoning. The algorithm is proposed for climate and environmental monitoring. In this paper, the percentage of wireless sensors that initiate a communication attempt is assumed as cost. The performance evaluation results show that the proposed spatial tracking approach is low-cost and can model the spatial signal over time with the same performance as that of spatial modeling.

Smartphone-Based Estimation of Item 3.8 of the MDS-UPDRS-III for Assessing Leg Agility in People With Parkinson's Disease

Goal: In this paper we investigated the use of smartphone sensors and Artificial Intelligence techniques for the automatic quantification of the MDS-UPDRS-Part III Leg Agility (LA) task, representative of lower limb bradykinesia. Methods: We collected inertial data from 93 PD subjects. Four expert neurologists provided clinical evaluations. We employed a novel Artificial Neural Network approach in order to get a continuous output, going beyond the MDS-UPDRS score discretization. Results: We found a Pearson correlation of 0.92 between algorithm output and average clinical score, compared to an inter-rater agreement index of 0.88. Furthermore, the classification error was less than 0.5 scale point in about 80% cases. Conclusions: We proposed an objective and reliable tool for the automatic quantification of the MDS-UPDRS Leg Agility task. In perspective, this tool is part of a larger monitoring program to be carried out during activities of daily living, and managed by the patients themselves.