Building structured biomaterials using AC electrokinetics

Multifunctional, inexpensive, and reusable nanoparticle-printed biochip for cell manipulation and diagnosis

Isolation and characterization of rare cells and molecules from a heterogeneous population is of critical importance in diagnosis of common lethal diseases such as malaria, tuberculosis, HIV, and cancer. For the developing world, point-of-care (POC) diagnostics design must account for limited funds, modest public health infrastructure, and low power availability. To address these challenges, here we integrate microfluidics, electronics, and inkjet printing to build an ultra-low-cost, rapid, and miniaturized lab-on-a-chip (LOC) platform. This platform can perform label-free and rapid single-cell capture, efficient cellular manipulation, rare-cell isolation, selective analytical separation of biological species, sorting, concentration, positioning, enumeration, and characterization. The miniaturized format allows for small sample and reagent volumes. By keeping the electronics separate from microfluidic chips, the former can be reused and device lifetime is extended. Perhaps most notably, the device manufacturing is significantly less expensive, time-consuming, and complex than traditional LOC platforms, requiring only an inkjet printer rather than skilled personnel and clean-room facilities. Production only takes 20 min (vs. up to weeks) and $0.01-an unprecedented cost in clinical diagnostics. The platform works based on intrinsic physical characteristics of biomolecules (e.g., size and polarizability). We demonstrate biomedical applications and verify cell viability in our platform, whose multiplexing and integration of numerous steps and external analyses enhance its application in the clinic, including by nonspecialists. Through its massive cost reduction and usability we anticipate that our platform will enable greater access to diagnostic facilities in developed countries as well as POC diagnostics in resource-poor and developing countries.

Liver-cell patterning lab chip: mimicking the morphology of liver lobule tissue

A lobule-mimetic cell-patterning technique for on-chip reconstruction of centimetre-scale liver tissue of heterogeneous hepatic and endothelial cells via an enhanced field-induced dielectrophoresis (DEP) trap is demonstrated and reported. By mimicking the basic morphology of liver tissue, the classic hepatic lobule, the lobule-mimetic-stellate-electrodes array was designed for cell patterning. Through DEP manipulation, well-defined and enhanced spatial electric field gradients were created for in-parallel manipulation of massive individual cells. With this liver-cell patterning labchip design, the original randomly distributed hepatic and endothelial cells inside the microfluidic chamber can be manipulated separately and aligned into the desired pattern that mimicks the morphology of liver lobule tissue. Experimental results showed that both hepatic and endothelial cells were orderly guided, snared, and aligned along the field-induced orientation to form the lobule-mimetic pattern. About 95% cell viability of hepatic and endothelial cells was also observed after cell-patterning demonstration via a fluorescent assay technique. The liver function of CYP450-1A1 enzyme activity showed an 80% enhancement for our engineered liver tissue (HepG2+HUVECs) compared to the non-patterned pure HepG2 for two-day culturing.

Microfluidic devices for cell cultivation and proliferation

Microfluidic technology provides precise, controlled-environment, cost-effective, compact, integrated, and high-throughput microsystems that are promising substitutes for conventional biological laboratory methods. In recent years, microfluidic cell culture devices have been used for applications such as tissue engineering, diagnostics, drug screening, immunology, cancer studies, stem cell proliferation and differentiation, and neurite guidance. Microfluidic technology allows dynamic cell culture in microperfusion systems to deliver continuous nutrient supplies for long term cell culture. It offers many opportunities to mimic the cell-cell and cell-extracellular matrix interactions of tissues by creating gradient concentrations of biochemical signals such as growth factors, chemokines, and hormones. Other applications of cell cultivation in microfluidic systems include high resolution cell patterning on a modified substrate with adhesive patterns and the reconstruction of complicated tissue architectures. In this review, recent advances in microfluidic platforms for cell culturing and proliferation, for both simple monolayer (2D) cell seeding processes and 3D configurations as accurate models of in vivo conditions, are examined.

Effects of Dielectrophoresis on Growth, Viability and Immuno-reactivity of Listeria monocytogenes

Dielectrophoresis (DEP) has been regarded as a useful tool for manipulating biological cells prior to the detection of cells. Since DEP uses high AC electrical fields, it is important to examine whether these electrical fields in any way damage cells or affect their characteristics in subsequent analytical procedures. In this study, we investigated the effects of DEP manipulation on the characteristics of Listeria monocytogenes cells, including the immuno-reactivity to several Listeria-specific antibodies, the cell growth profile in liquid medium, and the cell viability on selective agar plates. It was found that a 1-h DEP treatment increased the cell immuno-reactivity to the commercial Listeria species-specific polyclonal antibodies (from KPL) by ~31.8% and to the C11E9 monoclonal antibodies by ~82.9%, whereas no significant changes were observed with either anti-InlB or anti-ActA antibodies. A 1-h DEP treatment did not cause any change in the growth profile of Listeria in the low conductive growth medium (LCGM); however, prolonged treatments (4 h or greater) caused significant delays in cell growth. The results of plating methods showed that a 4-h DEP treatment (5 MHz, 20 Vpp) reduced the viable cell numbers by 56.8–89.7 %. These results indicated that DEP manipulation may or may not affect the final detection signal in immuno-based detection depending on the type of antigen-antibody reaction involved. However, prolonged DEP treatment for manipulating bacterial cells could produce negative effects on the cell detection by growth-based methods. Careful selection of DEP operation conditions could avoid or minimize negative effects on subsequent cell detection performance.

Tissue engineering with electric fields: investigation of the shape of mammalian cell aggregates formed at interdigitated oppositely castellated electrodes

The shape of aggregates of cells formed by positive dielectrophoresis (DEP) at interdigitated oppositely castellated electrodes under different conditions was investigated and compared with calculations of the electric field gradient |nablaE(2)|, and the electric field E, and E(2). The results confirm that at low field strength the cells predominantly accumulate above the tips of the electrodes, but at higher electric field strengths the cells predominantly accumulate in the middle of the aggregate. For a given electrode size, a higher applied voltage significantly increases the aggregate footprint. Higher flow rates distort this pattern, with more cells accumulating at the electrodes that are upstream. Calculation of the electric field strength E, E(2) and the electric field strength gradient |nablaE(2)| in the interdigitated oppositely castellated electrode array shows that, at low flow rates, there is a strong correlation between the aggregate shape and the distribution of the electric field E and E(2), but not so between the aggregate shape and |nablaE(2)|. The results indicate that interparticle forces such as pearlchain formation strongly affect the aggregation process, but that, when positive DEP is used to make the aggregates, the distribution of the electric field E, or better E(2), can be used as a useful guide to the final aggregate shape.

The use of electric fields in tissue engineering: A review

The use of electric fields for measuring cell and tissue properties has a long history. However, the exploration of the use of electric fields in tissue engineering is only very recent. A review is given of the various methods by which electric fields may be used in tissue engineering, concentrating on the assembly of artificial tissues from its component cells using electrokinetics. A comparison is made of electrokinetic techniques with other physical cell manipulation techniques which can be used in the construction of artificial tissues.

Morphology of fibroblasts grown on substrates formed by dielectrophoretically aligned carbon nanotubes

Multiwall carbon nanotube templates formed on the surfaces of planar interdigitated microelectrode arrays by means of AC electric field-guided assembly are being explored as potential substrates for tissue engineering. The objective of the present study is to examine whether surface patterns of aligned multiwall carbon nanotubes can have an effect on cell growth, morphology, and alignment. Bovine fibroblasts grown on aligned carbon nanotubes for a period of 2 weeks were found to have raised bodies and pronounced cell extensions for anchoring themselves to the substrate similar to that of the cells found in native tissues. On the other hand, cells grown on various control surfaces had a flat, circular morphology. The cell cultures were visualized by means of SEM imaging and the resulting morphologies were statistically analyzed and compared.

Tissue engineering with electric fields: immobilization of mammalian cells in multilayer aggregates using dielectrophoresis

Positive dielectrophoresis can be used to create aggregates of animal cells with 3D architectures. It is shown that the cells, when pulled together into an aggregate by positive dielectrophoresis in a low-conductivity iso-osmotic solution, adhere to each other. The adherence of the cells to each other is non-specific and increases in time, and after 10-15 min becomes strong enough to immobilize the cells in the aggregate, enabling the ac electric field to be released, and the iso-osmotic buffer to be replaced by growth or other media. Cell viability is maintained. The new method of immobilization significantly simplifies the construction of aggregates of animal cells by dielectrophoresis, and increases the utility of dielectrophoresis in tissue engineering and related areas.

Large scale dielectrophoretic construction of biofilms using textile technology

Arrays of microelectrodes for AC electrokinetic experiments were fabricated by weaving together stainless steel wires (weft) and flexible polyester yarn (warp) in a plain weave pattern. The cloth produced can be used to collect cells in low conductivity media by dielectrophoresis (DEP). The construction of model biofilms consisting of a yeast layer on top of a layer of M. luteus is demonstrated, using polyethylenimine (PEI) as the flocculating agent. This technique offers an alternative to the formation of biofilms at microelectrodes made by photolithography, and would allow the construction of biofilms with defined internal architectures by DEP at much larger scales than was possible previously. Furthermore, the flexibility of the cloth would also allow it to be distorted or folded into various shapes.

Dielectrophoresis based-cell patterning for tissue engineering

Engineering functional tissues and organs in vitro is considered integral to regenerative medicine. Many recent cell patterning technique developments position cells at a pre-designated pattern to improve tissue engineering efficiency and quality and to facilitate 3-D cell-cell interaction exploration. Among these techniques, dielectrophoresis (DEP)-based cell patterning advantageously offers speed, ease of operation, low degree of cell damage, and precision. This article reviews recent advances in DEP-based patterning techniques, including electrode design, suitable buffer and hydrogel, effects of the electric current to cells, combination potential with other techniques, as well as efforts to generate 3-D tissues.

Rapid heterogeneous liver-cell on-chip patterning via the enhanced field-induced dielectrophoresis trap

Biomimetic heterogeneous patterning of hepatic and endothelial cells, which start from randomly distributed cells inside the microfluidic chamber, via the chip design of enhanced field-induced dielectrophoresis (DEP) trap is demonstrated and reported in this paper. The concentric-stellate-tip electrode array design in this chip generates radial-pattern electric fields for the DEP manipulation of the live liver cells. By constructing the geometric shape and the distribution of stellate tips, the DEP electrodes enhance the desired spatial electric-field gradients to guide and snare individual cells to form the desired biomimetic pattern. With this proposed microfluidic chip design, the original randomly distributed hepatocytes inside the microfluidic chamber can be manipulated in parallel and align into the desired pearl-chain array pattern. This radial pattern mimics the lobular morphology of real liver tissue. The endothelial cells, then, are snared into the additional pearl-chain array and settle at the space in-between the previous hepatic pearl-chain array. By this cell-lab chip, we demonstrate the in vitro reconstruction of the heterogeneous lobule-mimetic radial pattern with good cell viability after cell patterning. This work reports the rapid in-parallel patterning of the dual types of live liver cells via the enhanced DEP trap inside the microfluidic chip.

Construction of artificially structured microbial consortia (ASMC) using dielectrophoresis: examining bacterial interactions via metabolic intermediates within environmental biofilms

The construction of artificial biofilms with defined internal architectures is described. Bacterial cells are suspended in a low conductivity medium, guided to specific areas in a microelectrode array by dielectrophoresis (DEP), and then immobilised using the flocculating agent poly(ethylenimine). Multispecies biofilms can be constructed by introducing different species at different times. The rapid construction of such biofilms with defined internal architectures provides, when combined with visual reporters of gene activity, a powerful new method for the investigation of the effects of the spatial organisation on interactions between bacterial species in biofilms. To demonstrate the utility of the technique as a method for investigating metabolic interactions in biofilms, aggregates were constructed from Acinetobacter sp. C6 and Pseudomonas putida::gfp. The Acinetobacter degrades benzyl alcohol, overproducing benzoate, which in turn is consumed by the Pseudomonas strain. The P. putida has a chromosomally expressed cassette encoding a gfp downstream of the promoter which controls degradation of benzoate, making the interaction between the two strains in the metabolism of benzyl alcohol visible by the production of green fluorescent protein (GFP). Microscopic observation of the biofilms, including the use of confocal laser scanning microscopy (CLSM), confirmed that metabolic exchange occurred. In addition, it was observed that the bacteria appear to have a preferred biofilm architecture, with P. putida in the bottom layer, and Acinetobacter at the top.

Dielectrophoresis of reverse phase emulsions

Reverse miniemulsions, emulsions of droplets of size 200 nm-1 microm of a polar liquid dispersed in an apolar continuous liquid phase, exhibit strong electrokinetic responses in low-frequency electric fields. The electrokinetic behaviour of a reverse miniemulsion, previously developed for use as electronic paper, has been investigated under static and flow conditions, in uniform and non-uniform electric fields. Results reveal that when using frequencies lower than 10 Hz strong aggregation of the droplets occurs. In uniform electric fields, under static conditions, droplets reversibly aggregate into honeycomb-like or irregular aggregates. Under flow conditions, droplets aggregate into approximately equidistant streams. In non-uniform electric fields the droplets reversibly aggregate in high-field regions, and can be guided along regions of high field strength in a flow. The potential of the technique for the formation of structured materials is discussed.