High-Density 2-μm-Pitch pH Image Sensor With High-Speed Operation up to 1933 fps

Real-time simultaneous visualization of lactate and proton dynamics using a 6-μm-pitch CMOS multichemical image sensor

Multi-analyte detection and imaging of extracellular chemical signaling molecules are crucial for understanding brain function and molecular pathology. In this work, we present a 6-μm-pitch, CMOS-based multichemical image sensor that enables the simultaneous visualization and spatiotemporal multimodal analysis of the lactate and proton (H+) dynamics without any labeling. Using semiconductor lithography, gold electrode patterns functioning as lactate-sensing regions were formed on a potentiometric sensor array. Lactate is detected potentiometrically because of redox reactions using lactate oxidase and horseradish peroxidase. The resulting multichemical image sensor exhibited a pH sensitivity of 65 mV and a superior detection limit of 1 μM for lactate with a reasonable selectivity. Furthermore, diffusion images of lactate and H+ distributions were obtained concurrently, allowing for simultaneous real-time imaging of the two chemicals with subcellular resolution. We believe that our novel imaging device can be successfully applied to extracellular microenvironments in tissue or cell samples as an effective bioimaging tool.

Electrical monitoring of human-serum-albumin-templated molecularly imprinted polymer nanoparticles with high affinity based on molecular charges and their visualization

Human-serum-albumin (HSA)-templated molecularly imprinted polymer nanoparticles (nano-MIPs) were integrated with a solution-gated field-effect transistor-based biosensor. The real-time electrical analysis of nano-MIP-HSA binding showed a high affinity and specificity of nano-MIPs for HSA. Moreover, the binding behaviour was continuously visualised using a solution-gated complementary metal-oxide semiconductor array image biosensor.

Effect of Surface Modification on the Fundamental Electrical Characteristics of Solution-Gated Indium Tin Oxide-Based Thin-Film Transistor Fabricated by One-Step Sputtering

Our solution-gated indium tin oxide (ITO)-based thin-film transistor (TFT) produced by single-step sputtering has great future potential in bioelectronics. In particular, chemical modifications of the ITO channel surface are expected to contribute to biomolecular recognition with ultrahigh sensitivity owing to a remarkably steep subthreshold slope (SS). In this study, we investigate the effect of a chemical modification of an aptamer as a receptor molecule at the ITO channel surface on the electrical characteristics of the solution-gated TFT. In this case, a SARS-CoV-2 aptamer is immobilized using a spacer molecule on an aryl diazonium monolayer that is electrochemically deposited with a radical scavenger. The monolayer is expected to not only passivate the ITO channel surface but also change the electron density in the ITO channel owing to the reduction reaction of aryl diazonium salts. Indeed, the electrochemical deposition of aryl diazonium salts decreases the leakage current through the ITO channel surface and provides a steep SS, which is near the thermal limit at 300 K, owing to the decrease in depletion layer capacitance. After the aptamer immobilization, the leakage current and SS unexpectedly return close to their original values before the surface modifications. This finding indicates that aptamer molecules should be carefully used because their negative charges would attract cations around the detection interface. Eventually, the solution-gated ITO-based TFT with the SARS-CoV-2 aptamer clearly responds to inactivated SARS-CoV-2 particles owing to the successful surface modification.

A LoC Ion Imaging Platform for Spatio-Temporal Characterisation of Ion-Selective Membranes

In this paper, a complete Lab-on-Chip (LoC) ion imaging platform for analysing Ion-Selective Membranes (ISM) using CMOS ISFET arrays is presented. An array of 128 × 128 ISFET pixels is employed with each pixel featuring 4 transistors to bias the ISFET to a common drain amplifier. Column-level 2-step readout circuits are designed to compensate for array offset variations in a range of up to ±1 V. The chemical signal associated with a change in ionic concentration is stored and fed back to a programmable gain instrumentation amplifier for compensation and signal amplification through a global system feedback loop. This column-parallel signal pipeline also integrates an 8-bit single slope ADC and an 8-bit R-2R DAC to quantise the processed pixel output. Designed and fabricated in the TSMC 180 nm BCD process, the System-on-Chip (SoC) operates in real time with a maximum frame rate of 1000 fps, whilst occupying a silicon area of 2.3 mm × 4.5 mm. The readout platform features a high-speed digital system to perform system-level feedback compensation with a USB 3.0 interface for data streaming. With this platform we show the first reported analysis and characterisation of ISMs using an ISFETs array through capturing real-time high-speed spatio-temporal information at a resolution of 16 μm in 1000 fps, extracting time-response and sensitivity. This work paves the way of understanding the electrochemical response of ISMs, which are widely used in various biomedical applications.

Self-oscillating chemoelectrical interface of solution-gated ion-sensitive field-effect transistor based on Belousov-Zhabotinsky reaction

The Belousov-Zhabotinsky (BZ) self-oscillation reaction is an important chemical model to elucidate nonequilibrium chemistry in an open system. However, there are only a few studies on the electrical behavior of pH oscillation induced by the BZ reaction, although numerous studies have been carried out to investigate the mechanisms by which the BZ reaction interacts with redox reactions, which results in potential changes. Needless to say, the electrical characteristic of a self-oscillating polymer gel driven by the BZ reaction has not been clarified. On the other hand, a solution-gated ion-sensitive field-effect transistor (ISFET) has a superior ability to detect ionic charges and includes capacitive membranes on the gate electrode. In this study, we carried out the electrical monitoring of self-oscillation behaviors at the chemoelectrical interface based on the BZ reaction using ISFET sensors, focusing on the pH oscillation and the electrical dynamics of the self-oscillating polymer brush. The pH oscillation induced by the BZ reaction is not only electrically observed using the ISFET sensor, the electrical signals of which results from the interfacial potential between the solution and the gate insulator, but also visualized using a large-scale and high-density ISFET sensor. Moreover, the N-isopropylacrylamide (NIPAAm)-based self-oscillating polymer brush with Ru(bpy)3 as a catalyst clearly shows a periodic electrical response based on the swelling-deswelling behavior caused by the BZ reaction on the gate insulator of the ISFET sensor. Thus, the elucidation of the electrical self-oscillation behaviors induced by the BZ reaction using the ISFET sensor provides a solution to the problems of nonequilibrium chemistry.

CMOS-Based Redox-Type Label-Free ATP Image Sensor for In Vitro Sensitive Imaging of Extracellular ATP

Adenosine 5'-triphosphate (ATP) plays a crucial role as an extracellular signaling molecule in the central nervous system and is closely related to various nerve diseases. Therefore, label-free imaging of extracellular ATP dynamics and spatiotemporal analysis is crucial for understanding brain function. To decrease the limit of detection (LOD) of imaging extracellular ATP, we fabricated a redox-type label-free ATP image sensor by immobilizing glycerol-kinase (GK), L-α-glycerophosphate oxidase (LGOx), and horseradish peroxidase (HRP) enzymes in a polymer film on a gold electrode-modified potentiometric sensor array with a 37.3 µm-pitch. Hydrogen peroxide (H₂O₂) is generated through the enzymatic reactions from GK to LGOx in the presence of ATP and glycerol, and ATP can be detected as changes in its concentration using an electron mediator. Using this approach, the LOD for ATP was 2.8 µM with a sensitivity of 77 ± 3.8 mV/dec., under 10 mM working buffers at physiological pH, such as in in vitro experiments, and the LOD was great superior 100 times than that of the hydrogen ion detection-based image sensor. This redox-type ATP image sensor may be successfully applied for in vitro sensitive imaging of extracellular ATP dynamics in brain nerve tissue or cells.

Redox Sensor Array with 23.5-μm Resolution for Real-Time Imaging of Hydrogen Peroxide and Glutamate Based on Charge-Transfer-Type Potentiometric Sensor

Towards clarifying the spatio-temporal neurotransmitter distribution, potentiometric redox sensor arrays with 23.5-µm resolution were fabricated. The sensor array based on a charge-transfer-type potentiometric sensor comprises 128×128 pixels with gold electrodes deposited on the surface of pixels. The sensor output corresponding to the interfacial potential of the electrode changed logarithmically with the mixture ratio of K3Fe(CN)6 and K4Fe(CN)6, where the redox sensitivity reached 49.9 mV/dec. By employing hydrogen peroxidase as an enzyme and ferrocene as an electron mediator, the sensing characteristics for hydrogen peroxide (H2O2) were investigated. The analyses of the sensing characteristics revealed that the sensitivity was about 44.7 mV/dec., comparable to the redox sensitivity, while the limit of detection (LOD) was achieved to be 1 µM. Furthermore, the oxidation state of the electron mediator can be the key to further lowering the LOD. Then, by immobilizing oxidizing enzyme for H2O2 and glutamate oxidase, glutamate (Glu) measurements were conducted. As a result, similar sensitivity and LOD to those of H2O2 were obtained. Finally, the real-time distribution of 1 µM Glu was visualized, demonstrating the feasibility of our device as a high-resolution bioimaging technique.

An Ultra-High Frame Rate Ion Imaging Platform Using ISFET Arrays With Real-Time Compression

In this paper, a Lab-on-Chip platform with ultra-high throughput and real-time image compression for high speed ion imaging is presented. The sensing front-end comprises of a CMOS ISFET array with sensors biased in velocity saturation for a linear pH-to-current conversion and high spatial and temporal resolution. An array of 128 × 128 pixels is designed with a pixel size of 13.5 μm × 10.5 μm. In-pixel reset switches are applied for offset compensation, by asynchronously resetting the floating gate of the ISFET to a known fixed potential. Additionally, each row of pixels is processed by a current mode signal pipeline with auto zeroing functionality to remove fixed pattern noise, followed by an on-chip 1 MS/s 8-bit row-parallel single slope ADC. Fabricated in standard TSMC 180 nm BCD process, the entire system-on-chip occupies a silicon area of 2 mm × 2 mm, and achieves a frame rate of 6100 fps (7800 fps from simulation). A high speed 25 ms-latency readout platform based on a USB 3.0 interface and standard JPEG is presented for real-time ion imaging and image compression respectively, while an optimised JPEG algorithm is also designed and verified for a higher compression ratio without sacrificing image quality. We demonstrate real-time ion image visualisation by sensing high speed ion diffusion at 6100 fps, which is more than two times faster than the current state-of-the-art.

An Optical and Temperature Assisted CMOS ISFET Sensor Array for Robust E. Coli Detection

Both bacterial viability and concentration are significant metrics for bacterial detection. Existing miniaturized and cost-effective single-mode sensor, pH or optical, can only be skilled at detecting single information viability or concentration. This paper presents an inverter-based CMOS ion-sensitive-field-effect-transistor (ISFET) sensor array, featuring bacterial pH detection which is an indicator of viability. The proposed design realizes pH detection using the native passivation layer of CMOS process as a sensing layer and configuring an inverter-based front-end as a capacitive feedback amplifier. This sensor array is assisted by temperature sensing and optical detection which reveals bacterial concentration. The optical detection is enabled using the leakage current of a reset switch as a response to a light source. While in reset mode, the inverter-based amplifier works as a temperature sensor that could help to reduce temperature influences on pH and optical detection. All the functionalities are realized using one single inverter-based amplifier, resulting in a compact pixel structure and largely relaxed design complexity for the sensor system. Fabricated in 0.18 μm standard CMOS process, the proposed CMOS sensor array system achieves an amplified pH sensitivity of 221 mV/pH, an improved sensor resolution of 0.03 pH through systematic noise optimization, a linear optical response, and a maximum temperature error of 0.69 ^°C. The sensing capabilities of the proposed design are demonstrated through on-chip Escherichia coli (E. coli) detection. This study may be extended to a rapid and cost-effective platform that renders multiple information of bacterial samples.

A Two-Electrode, Double-Pulsed Sensor Readout Circuit for Cardiac Troponin I Measurement

This paper presents a pulse-stimulus sensor readout circuit for use in cardiovascular disease examinations. The sensor is based on a gold nanoparticle plate with an antibody post-modification. The proposed system utilizes gated pulses to detect the biomarker Cardiac Troponin I in an ionic solution. The characteristic of the electrostatic double-layer capacitor generated by the analyte is related to the concentration of Cardiac Troponin I in the solvent. After sensing by the transistor, a current-to-frequency converter (I-to-F) and delay-line-based time-to-digital converter (TDC) convert the information into a series of digital codes for further analysis. The design is fabricated in a 0.18-μm standard CMOS process. The chip occupies an area of 0.92 mm² and consumes 125 μW. In the measurements, the proposed circuit achieved a 1.77 Hz/pg-mL sensitivity and 72.43 dB dynamic range.

A High Offset Distribution Tolerance High Resolution ISFET Array With Auto-Compensation for Long-Term Bacterial Metabolism Monitoring

This paper presents a CMOS ion-sensitive-field-effect-transistor (ISFET) array with superior offset distribution tolerance, resolution and linearity for long-term bacterial metabolism monitoring. A floating gate ISFET is adopted as the sensing front end to maximize ion sensitivity and support ultra-long-term measurement. To solve the DC offset issue induced by trapped chargers and drifts in each ISFET sensor, a complementary readout scheme with column offset compensation is proposed. P-type and N-type source followers are combined to cover a wide range of input DC offsets while maintaining small area and high linearity. The DC offset is digitally compensated during signal readout to facilitate global amplification and quantization. Fabricated in 0.18 μm standard CMOS process, the ISFET array can tolerate an offset distribution beyond power supply with a linear pH-to-output response. Due to high ion sensitivity and low circuit noise, the whole system achieves a high resolution of 0.017 pH. The proposed ISFET system has successfully demonstrated an accurate pH monitoring of normal Escherichis coli growth for 11 hours and its response to antibiotics, showing long-term bacterial metabolism monitoring capability.

A 128 × 128 Current-Mode Ultra-High Frame Rate ISFET Array With In-Pixel Calibration for Real-Time Ion Imaging

An ultra-high frame rate and high spatial resolution ion-sensing Lab-on-Chip platform using a 128 × 128 CMOS ISFET array is presented. Current mode operation is employed to facilitate high-speed operation, with the ISFET sensors biased in the triode region to provide a linear response. Sensing pixels include a reset switch to allow in-pixel calibration for non-idealities such as offset, trapped charge and drift by periodically resetting the floating gate of the ISFET sensor. Current mode row-parallel signal processing is applied throughout the readout pipeline including auto-zeroing circuits for the removal of fixed pattern noise. The 128 readout signals are multiplexed to eight high-sample-rate on-chip current mode ADCs followed by an off-chip PCIe-based readout system on a FPGA with a latency of 0.15 s. Designed in a 0.35 μm CMOS process, the complete system-on-chip occupies an area of 2.6 × 2.2 [Formula: see text] with a pixel size of 18 × 12.5 μ[Formula: see text] and the whole system achieves a frame rate of 3000 fps which is the highest reported in the literature for ISFET arrays. The platform is demonstrated in the application of real-time ion-imaging through the high-speed visualization of sodium hydroxide (NaOH) diffusion in water at 60 fps on screen in addition to slow-motion playback of ion-dynamics recorded at 3000 fps.