Steps toward a model nanotopography

Macrophage cell morphology-imprinted substrates can modulate mesenchymal stem cell behaviors and macrophage M1/M2 polarization for wound healing applications

Mesenchymal stem cells and macrophages (MQ) are two very important cells involved in the normal wound healing process. It is well understood that topological cues and mechanical factors can lead to different responses in stem cells and MQ by influencing their shape, cytoskeleton proliferation, migration, and differentiation, which play an essential role in the success or failure of biomaterial implantation and more importantly wound healing. On the other hand, the polarization of MQ from proinflammatory (M1) to prohealing (M2) phenotypes has a critical role in the acceleration of wound healing. In this study, the morphology of different MQ subtypes (M0, M1, and M2) was imprinted on a silicon surface (polydimethylsiloxane [PDMS]) to prepare a nano-topography cell-imprinted substrate with the ability to induce anti-inflammatory effects on the mouse adipose-derived stem cells (ADSCs) and RAW264.7 monocyte cell line (MO). The gene expression profiles and flow cytometry of MQ revealed that the cell shape microstructure promoted the MQ phenotypes according to the specific shape of each pattern. The ELISA results were in agreement with the gene expression profiles. The ADSCs on the patterned PDMS exhibited remarkably different shapes from no-patterned PDMS. The MOs grown on M2 morphological patterns showed a significant increase in expression and section of anti-inflammatory cytokine compared with M0 and M1 patterns. The ADSCs homing in niches heavily deformed the cytoskeletal, which is probably why the gene expression and phenotype unexpectedly changed. In conclusion, wound dressings with M2 cell morphology-induced surfaces are suggested as excellent anti-inflammatory and antiscarring dressings.

Surface self-assembly of colloidal crystals for micro- and nano-patterning

The controlled patterning of polymeric surfaces at the micro- and nanoscale offers potential in the technological development of small-scale devices, particularly within the fields of photovoltaics, micro-optics and lab- and organ-on-chip, where the topological arrangement of the surface can influence a system's power generation, optical properties or biological function - such as, in the latter case, biomimicking surfaces or topological control of cellular differentiation. One of the most promising approaches in reducing manufacturing costs and complexity is by exploitation of the self-assembling properties of colloidal particles. Self-assembly techniques can be used to produce colloidal crystals onto surfaces, which can act as replicative masks, as has previously been demonstrated with colloidal lithography, or templates in mold-replication methods with resolutions dependent on particle size. Within this context, a particular emerging interest is focused on the use of self-assembled colloidal crystal surfaces in polymer replication methods such as soft lithography, hot and soft embossing and nano-imprint lithography, offering low-cost and high-resolution alternatives to conventional lithographic techniques. However, there are still challenges to overcome for this surface patterning approach to reach a manufacturing reliability and process robustness comparable to competitive technologies already available in the market, as self-assembly processes are not always 100% effective in organizing colloids within a structural pattern onto the surface. Defects often occur during template fabrication. Furthermore, issues often arise mainly at the interface between colloidal crystals and other surfaces and substrates. Particularly when utilized in high-temperature pattern replication processes, poor adhesion of colloidal particles onto the substrate results in degradation of the patterning template. These effects can render difficulties in creating stable structures with little defect that are well controlled such that a large variety of shapes can be reproduced reliably. This review presents an overview of available self-assembly methods for the creation of colloidal crystals, organized by the type of forces governing the self-assembly process: fluidic, physical, external fields, and chemical. The main focus lies on the use of spherical particles, which are favorable due to their high commercial availability and ease of synthesis. However, also shape-anisotropic particle self-assembly will be introduced, since it has recently been gaining research momentum, offering a greater flexibility in terms of patterning. Finally, an overview is provided of recent research on the fabrication of polymer nano- and microstructures by making use of colloidal self-assembled templates.

Nanotopographical Surfaces for Stem Cell Fate Control: Engineering Mechanobiology from the Bottom

During embryogenesis and tissue maintenance and repair in an adult organism, a myriad of stem cells are regulated by their surrounding extracellular matrix (ECM) enriched with tissue/organ-specific nanoscale topographical cues to adopt different fates and functions. Attributed to their capability of self-renewal and differentiation into most types of somatic cells, stem cells also hold tremendous promise for regenerative medicine and drug screening. However, a major challenge remains as to achieve fate control of stem cells in vitro with high specificity and yield. Recent exciting advances in nanotechnology and materials science have enabled versatile, robust, and large-scale stem cell engineering in vitro through developments of synthetic nanotopographical surfaces mimicking topological features of stem cell niches. In addition to generating new insights for stem cell biology and embryonic development, this effort opens up unlimited opportunities for innovations in stem cell-based applications. This review is therefore to provide a summary of recent progress along this research direction, with perspectives focusing on emerging methods for generating nanotopographical surfaces and their applications in stem cell research. Furthermore, we provide a review of classical as well as emerging cellular mechano-sensing and -transduction mechanisms underlying stem cell nanotopography sensitivity and also give some hypotheses in regard to how a multitude of signaling events in cellular mechanotransduction may converge and be integrated into core pathways controlling stem cell fate in response to extracellular nanotopography.

Correlating cell morphology and osteoid mineralization relative to strain profile for bone tissue engineering applications

A number of bone tissue engineering strategies use porous three-dimensional scaffolds in combination with bioreactor regimes. The ability to understand cell behaviour relative to strain profile will allow for the effects of mechanical conditioning in bone tissue engineering to be realized and optimized. We have designed a model system to investigate the effects of strain profile on bone cell behaviour. This simplified model has been designed with a view to providing insight into the types of strain distribution occurring across a single pore of a scaffold subjected to perfusion-compression conditioning. Local strains were calculated at the surface of the pore model using finite-element analysis. Scanning electron microscopy was used in secondary electron mode to identify cell morphology within the pore relative to local strains, while backscattered electron detection in combination with X-ray microanalysis was used to identify calcium deposition. Morphology was altered according to the level of strain experienced by bone cells, where cells subjected to compressive strains (up to 0.61%) appeared extremely rounded while those experiencing zero and tensile strain (up to 0.81%) were well spread. Osteoid mineralization was similarly shown to be dose dependent with respect to substrate strain within the pore model, with the highest level of calcium deposition identified in the intermediate zones of tension/compression.

Colloidal lithography and current fabrication techniques producing in-plane nanotopography for biological applications

Substrate topography plays a vital role in cell and tissue structure and function in situ, where nanometric features, for example, the detail on single collagen fibrils, influence cell behaviour and resultant tissue formation. In vitro investigations demonstrate that nanotopography can be used to control cell reactions to a material surface, indicating its potential application in tissue engineering and implant fabrication. Developments in the catalyst, optical, medical and electronics industries have resulted in the production of nanopatterned surfaces using a variety of methods. The general protocols for nanomanufacturing require high resolution and low cost for fabricating devices. With respect to biological investigations, nanotopographies should occur across a large surface area (ensuring repeatability of experiments and patterning of implant surfaces), be reproducible (allowing for consistency in experiments), and preferably, accessible (limiting the requirement for specialist equipment). Colloidal lithography techniques fit these criteria, where nanoparticles can be utilized in combination with a functionalized substrate to produce in-plane nanotopographies. Subsequent lithographic processing of colloidal substrates utilizing, for example, reactive ion etching allows the production of modified colloidal-derived nanotopographies. In addition to two-dimensional in-plane nanofabrication, functionalized structures can be dip coated in colloidal sols, imparting nanotopographical cues to cells within a three-dimensional environment.

The Effects of Colloidal Nanotopography on Initial Fibroblast Adhesion and Morphology

Colloidal lithography offers a simple, inexpensive method of producing irregular nanotopographies, a pattern not easily attainable utilizing conventional serial writing processes. Colloids with 20- or 50-nm diameter were utilized to produce such an irregular topography and were characterized by calculating the percentage area coverage of particles. Interparticle and nearest neighbor spacing were also assessed for the individual colloids in the pattern. Two-way analysis of variance (ANOVA) indicated significant differences between the number of fibroblasts adhering to planar, 20-, and 50-nm-diameter colloidal topographies, the number of fibroblasts adhering to the substrates at the time intervals studied, namely 20 min, 1 h, and 3 h and significant interaction between time and topography on fibroblast adhesion (P < 0.01). Tukey tests were utilized for sensitive identification of the differences between the sample means and compounded ANOVA results. Cytoskeletal and general cell morphology were investigated on planar and colloidal substrates, and indicated cells in contact with irregular nanotopographies exhibit many peripheral protrusions while such protrusions are absent in cells on planar control surfaces. These protrusions are rich in microtubules on 20-nm-diameter colloidal surfaces while microfilaments are prevalent on 50-nm-diameter surfaces. Moreover, by 3 h, cells on the colloidal substrates initiate cell-cell adhesions, also absent in controls.

Human fibroblast reactions to standard and electropolished titanium and Ti-6Al-7Nb, and electropolished stainless steel

Stainless steel (SS), titanium (cpTi), and Ti-6Al-7Nb (TAN) are frequently used metals in orthopedic internal fracture fixation. Although reactivity to SS and cpTi are noted in reference, the soft tissue compatibility of TAN has not been comprehensively studied. This study focuses on the in vitro soft tissue compatibility of TAN in comparison to SS and cpTi using a human fibroblast model. The industrial standard surface finishes of these three materials vary considerably in view of their use in similar applications. To distinguish between material parameters of topography and chemistry, we have included electropolished (e.p) counterparts of the standard preparations of cpTi and TAN in the study (standard SS is e.p). All materials were characterized using atomic force microscopy, profilometry, and scanning electron microscopy. Our findings demonstrate that cell morphology and growth rate was similar for SS, and e.p. cpTi and TAN, with cells well spread and forming a confluent monolayer by 10 days. Cell growth on standard cpTi was similar to the electropolished samples; however, they showed a less spread morphology with more filopodia and surface ruffling present. Cell morphology on standard TAN was rounded or elongated and proliferation was inhibited at all time points, with possible cell necrosis by day 10. We found evidence of endocytosis of beta-phase particles originating from the standard TAN surface. We believe that the particle uptake coupled with the characteristic surface topography contribute to the noncytocompatibility of fibroblasts on standard TAN.

Topographically induced direct cell mechanotransduction

This review is designed to introduce the cytoskeleton and then discuss how mechanical forces may be transduced to the cell nucleus. In addition to this, it also tries to explain current thinking as to how the nucleus turns these mechanical cues into gene changes and is especially interested in mechanotransduction arising from topographically induced morphological changes, specifically nanotopography. Thus, this review also describes cell responses to topography.

Attempted endocytosis of nano-environment produced by colloidal lithography by human fibroblasts

Control of the cells' nanoenvironment is likely to be important in the future of cell and tissue engineering. Microtopography has been shown to provide cues to cells that elicit a large range of cell responses, including control of adhesion, morphology, apoptosis and gene regulations. Now, researchers are focusing on nanotopography as techniques such as colloidal and electron beam lithography and polymer demixing have become available. In this study, human fibroblast response to nanocolumns (160-nm high, 100-nm diameter, 230-nm centre-centre spacing) produced by colloidal lithography are considered. Using electron microscopy and immunofluorescence to image the cytoskeleton, clathrin and dynamin, it was observed that the cells try to endocytose the nanocolumns. It also appeared that a small population of the cells changed to unusual morphologies with macrophage-like processes and highly disrupted cytoskeleton. These observations could have implications for nanomaterials science in areas such as cell transfection and drug delivery.