Uricase biofunctionalized plasmonic sensor for uric acid detection with APTES-modified gold nanotopping

Current uric acid detection methodologies lack the requisite sensitivity and selectivity for point-of-care applications. Plasmonic sensors, while promising, demand refinement for improved performance. This work introduces a biofunctionalized sensor predicated on surface plasmon resonance to quantify uric acid within physiologically relevant concentration ranges. The sensor employs the covalent immobilization of uricase enzyme using 1-Ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) and N-Hydroxysuccinimide (NHS) crosslinking agents, ensuring the durable adherence of the enzyme onto the sensor probe. Characterization through atomic force microscopy and Fourier transform infrared spectroscopy validate surface alterations. The Langmuir adsorption isotherm model elucidates binding kinetics, revealing a sensor binding affinity of 298.83 (mg/dL)-1, and a maximum adsorption capacity of approximately 1.0751°. The biofunctionalized sensor exhibits a sensitivity of 0.0755°/(mg/dL), a linear correlation coefficient of 0.8313, and a limit of detection of 0.095 mg/dL. Selectivity tests against potentially competing interferents like glucose, ascorbic acid, urea, D-cystine, and creatinine showcase a significant resonance angle shift of 1.1135° for uric acid compared to 0.1853° for interferents at the same concentration. Significantly, at a low uric acid concentration of 0.5 mg/dL, a distinct shift of 0.3706° was observed, setting it apart from the lower values noticed at higher concentrations for all typical interferent samples. The uricase enzyme significantly enhances plasmonic sensors for uric acid detection, showcasing a seamless integration of optical principles and biological recognition elements. These sensors hold promise as vital tools in clinical and point-of-care settings, offering transformative potential in biosensing technologies and the potential to revolutionize healthcare outcomes in biomedicine.

Inhibition effect of epicatechin gallate on acid phosphatases from rainbow trout (Oncorhynchus mykiss) liver by multispectral and molecular docking

Inhibition of acid phosphatase, which significantly contributes to inosine 5'-monophosphate (IMP) degradation, is crucial for preventing flavor deterioration of aquatic products during storage. In this study, the inhibitory effect of epicatechin gallate (ECG) on the activity of acid phosphatase isozymes (ACPI and ACPII) was analyzed using inhibition kinetics, fluorescence spectroscopy, isothermal titration calorimetry, and molecular simulation. ACPI and ACPII with molecular weights of 59.5 and 37.3 kDa, respectively, were purified from rainbow trout liver. ECG reversibly inhibited ACPI and ACPII activities via mixed-type inhibition, with half maximal inhibitory concentration (IC50) of 0.24 ± 0.01 mmol/L and 0.27 ± 0.03 mmol/L, respectively. Fluorescence spectra indicated that ECG statically quenched the intrinsic fluorescence of ACPI and ACPII. ECG could spontaneously bind to ACPI and ACPII through hydrogen bonding and van der Waals forces and exhibited a higher affinity for ACPI than for ACPII. In addition, molecular dynamic simulation revealed that ECG-ACPI and ECG-ACPII complexes were relatively stable during the entire simulation process. Our findings provide a theoretical basis for the use of ECG as an inhibitor of ACP to improve the flavor of aquatic products.

Portable optical fiber biosensors integrated with smartphone: technologies, applications, and challenges [Invited]

The increasing demand for individualized health monitoring and diagnostics has prompted considerable research into the integration of portable optical fiber biosensors integrated with smartphones. By capitalizing on the benefits offered by optical fibers, these biosensors enable qualitative and quantitative biosensing across a wide range of applications. The integration of these sensors with smartphones, which possess advanced computational power and versatile sensing capabilities, addresses the increasing need for portable and rapid sensing solutions. This extensive evaluation thoroughly examines the domain of optical fiber biosensors in conjunction with smartphones, including hardware complexities, sensing approaches, and integration methods. Additionally, it explores a wide range of applications, including physiological and chemical biosensing. Furthermore, the review provides an analysis of the challenges that have been identified in this rapidly evolving area of research and concludes with relevant suggestions for the progression of the field.

Harnessing two-dimensional nanomaterials for diagnosis and therapy in neurodegenerative diseases: Advances, challenges and prospects

Neurodegenerative diseases (NDDs) are specific brain disorders characterized by the progressive deterioration of different motor activities as well as several cognitive functions. Current conventional therapeutic options for NDDs are limited in addressing underlying causes, delivering drugs to specific neuronal targets, and promoting tissue repair following brain injury. Due to the paucity of plausible theranostic options for NDDs, nanobiotechnology has emerged as a promising field, offering an interdisciplinary approach to create nanomaterials with high diagnostic and therapeutic efficacy for these diseases. Recently, two-dimensional nanomaterials (2D-NMs) have gained significant attention in biomedical and pharmaceutical applications due to their precise drug-loading capabilities, controlled release mechanisms, enhanced stability, improved biodegradability, and reduced cell toxicity. Although various studies have explored the diagnostic and therapeutic potential of different nanomaterials in NDDs, there is a lack of comprehensive review addressing the theranostic applications of 2D-NMs in these neuronal disorders. Therefore, this concise review aims to provide a state-of-the-art understanding of the need for these ultrathin 2D-NMs and their potential applications in biosensing and bioimaging, targeted drug delivery, tissue engineering, and regenerative medicine for NDDs.

Visible and angular interrogation of Kretschmann-based SPR using hybrid Au-ZnO optical sensor for hyperuricemia detection

Uric acid is a waste product of the human body where high levels of it or hyperuricemia can lead to gout, kidney disease and other health issues. In this paper, Finite Difference Time Doman (FDTD) simulation method was used to develop a plasmonic optical sensor to detect uric acid with molarity ranging from 0 to 3.0 mM. A hybrid layer of gold-zinc oxide (Au-ZnO) was used in this Kretschmann-based Surface Plasmon Resonance (K-SPR) technique with angular interrogation at 670 nm and 785 nm visible optical wavelengths. The purpose of this study is to observe the ability of the hybrid material as a sensing performance enhancer for differentiating between healthy and unhealthy uric acid levels based on the refractive index values from previous study. Upon exposure to 670 nm wavelength, the average sensitivity of this sensor was found to be 0.028°/mM with a linearity of 98.67 % and Q-factor value of 0.0053 mM - 1 . While at 785 nm, the average sensitivity is equal to 0.0193°/mM with slightly lower linearity at 94.46 % and Q-factor value of 0.0076 mM - 1 . The results have proven the ability of hybrid material Au-ZnO as a sensing performance enhancer for detecting uric acid when compared with bare Au and can be further explored in experimental work.

Novel Bottom-Side Polished PCF-Based Plasmonic Biosensor for Early Detection of Hazardous Cancerous Cells

This work presents a single-core bowl-shaped bottom-side polished (BSP) photonic crystal fiber (PCF) sensor based on surface plasmon resonance (SPR) concept for the early detection of hazardous cancer cells in human blood, skin, cervical, breast, and adrenal glands. We have studied liquid samples of cancer-affected and healthy samples with their concentrations/refractive indices in the sensing medium. To induce a plasmonic effect in the PCF sensor, the bottom flat section of a silica PCF fiber is coated with a 40nm plasmonic material, such as gold. To strengthen this effect, a thin TiO2 layer of 5 nm is sandwiched between fiber and gold as it strongly holds gold nanoparticles with smooth fiber surface. When the cancer-affected sample is introduced to the sensor's sensing medium, it produces a different absorption peak in the form of a resonance wavelength than the healthy sample. This reallocation of the absorption peak is used to determine sensitivity. Hence, the obtained sensitivities for blood cancer, cervical cancer, adrenal gland cancer, skin cancer, and breast cancer (type-1and type-2) cells are 22,857nm/RIU, 20000nm/RIU, 20714nm/RIU, 20000nm/RIU, 21428nm/RIU, and 25000nm/RIU, respectively, with highest detection limit 0.024. These strong findings indicate that our proposed cancer sensor PCF is a viable choice for early cancer cell detection.

Advances in Tapered Optical Fiber Sensor Structures: From Conventional to Novel and Emerging

Optical fiber sensors based on tapered optical fiber (TOF) structure have attracted a considerable amount of attention from researchers due to the advantages of simple fabrication, high stability, and diverse structures, and have great potential for applications in many fields such as physics, chemistry, and biology. Compared with conventional optical fibers, TOF with their unique structural characteristics significantly improves the sensitivity and response speed of fiber-optic sensors and broadens the application range. This review presents an overview of the latest research status and characteristics of fiber-optic sensors and TOF sensors. Then, the working principle of TOF sensors, fabrication schemes of TOF structures, novel TOF structures in recent years, and the growing emerging application areas are described. Finally, the development trends and challenges of TOF sensors are prospected. The objective of this review is to convey novel perspectives and strategies for the performance optimization and design of TOF sensors based on fiber-optic sensing technologies.

A review of Optical Point-of-Care devices to Estimate the Technology Transfer of These Cutting-Edge Technologies

Despite the remarkable development related to Point-of-Care devices based on optical technology, their difficulties when used outside of research laboratories are notable. In this sense, it would be interesting to ask ourselves what the degree of transferability of the research work to the market is, for example, by analysing the relation between the scientific work developed and the registered one, through patent. In this work, we provide an overview of the state-of-the-art in the sector of optical Point-of-Care devices, not only in the research area but also regarding their transfer to market. To this end, we explored a methodology for searching articles and patents to obtain an indicator that relates to both. This figure of merit to estimate this transfer is based on classifying the relevant research articles in the area and the patents that have been generated from these ones. To delimit the scope of this study, we researched the results of a large enough number of publications in the period from 2015 to 2020, by using keywords "biosensor", "optic", and "device" to obtain the most representative articles from Web of Science and Scopus. Then, we classified them according to a particular classification of the optical PoC devices. Once we had this sampling frame, we defined a patent search strategy to cross-link the article with a registered patent (by surfing Google Patents) and classified them accordingly to the categories described. Finally, we proposed a relative figure called Index of Technology Transference (IoTT), which estimates to what extent our findings in science materialized in published articles are protected by patent.

Novel Optical Fiber-Based Structures for Plasmonics Sensors

Optical fiber sensors based on surface plasma technology have many unique advantages in specific applications such as extreme environmental monitoring, physical parameter determination, and biomedical indicators testing. In recent decades, various kinds of fiber probes with special structures were developed according to special processing such as tapering, splicing, etching, fiber balls, grating etc. In this paper, the fabrication technology, characteristics, development status and application scenarios of different special optical fiber structures are briefly reviewed, including common processing equipment. Furthermore, many special novel optical fiber structures reported in recent years are summarized, which have been used in various kinds of plasmonic sensing work. Then, the fiber-plasmonic sensors for practical applications are also introduced and examined in detail. The main aim of this review is to provide guidance and inspiration for researchers to design and fabricate special optical fiber structures, thus facilitating their further research.

Synthesis, characterization, and applications of gold nanoparticles in development of plasmonic optical fiber-based sensors

Gold nanoparticles (Au-NPs) are readily used nanoparticles which finds applications in fields like biosensors, drug delivery, optical bioimaging and many state of art systems used for detection. In the recent years fiber optic sensors have seen utilization of Au-NPs along with other nanoparticles for implementation of sensors for sensing various biomolecules like cholesterol, glucose, and uric acid. The cancer cells, creatinine and bacteria can also be detected with the fiber optic sensors. Given the significance of Au-NPs in fiber optic sensors, the current work is a review of the synthesis, the common methods used for characterization, and the applications of Au-NPs. It is important to discuss and analyse the work reported in the literature to understand the trend and gaps in developing plasmonic optical fiber sensors.

Advances in Novel Nanomaterial-Based Optical Fiber Biosensors-A Review

This article presents a concise summary of current advancements in novel nanomaterial-based optical fiber biosensors. The beneficial optical and biological properties of nanomaterials, such as nanoparticle size-dependent signal amplification, plasmon resonance, and charge-transfer capabilities, are widely used in biosensing applications. Due to the biocompatibility and bioreceptor combination, the nanomaterials enhance the sensitivity, limit of detection, specificity, and response time of sensing probes, as well as the signal-to-noise ratio of fiber optic biosensing platforms. This has established a practical method for improving the performance of fiber optic biosensors. With the aforementioned outstanding nanomaterial properties, the development of fiber optic biosensors has been efficiently promoted. This paper reviews the application of numerous novel nanomaterials in the field of optical fiber biosensing and provides a brief explanation of the fiber sensing mechanism.

Synthesis and characterization of gold nanoparticles and graphene oxide for the development of optical fiber biosensors

Optical fiber technology, in association with the phenomenon of surface plasmon resonance (SPR), has opened a new gateway for quick, easier, and accurate sensing of various chemical, biochemical, and biological parameters. Continuous efforts can be seen in the direction of increasing the sensitivity of the optical fiber biosensors; thus, many hybrid nanostructured optical fiber biosensors composing different nanomaterials, nanomaterial combinations, and different 2D materials have been proposed in the past few decades. This paper discusses the synthesis, characterization, and applications of nanoparticles to the most favorable noble metal for SPR biosensing, i.e., gold. The gold nanoparticles (AuNPs) were prepared by the Turkevich method, and the optical property of AuNPs was characterized using the UV-visible spectrophotometer and transmission electron microscopy (TEM) technique. In addition, the synthesis, characterization, and application of the oxide form the most explored 2D material, i.e., graphene, are also presented in this paper. The graphene oxide was synthesized using an easier and economical method, i.e., a modified Hummer's method, and an evaluation of the characteristics has been done by a UV-visible spectrophotometer and TEM results.

Fabrication of an all-silica microsphere-lens on optical fiber for free-space light coupling and sensing in extreme environments

In this paper, an all-silica microsphere-lens was designed and fabricated on the fiber end face, which can effectively improve the coupling efficiency of free-space light. In the production process, a coreless silica fiber with specific length was spliced on the end face of the fiber and melted by a CO₂ laser fusion splicer. Due to the effect of surface tension, the coreless silica fiber would form a microsphere-lens on the fiber end face and the diameter of the microsphere-lens could be adjusted by controlling the light-passing time of the CO₂ laser fusion splicer. Through experiments, it can be found that the 3 dB bandwidth optical coupling distance of the microsphere-lens with a diameter of 270 µm is about 200 µm, and the focus depth is about 450 µm. In order to verify the feasibility of using the microsphere-lens in the fiber-optic Fabry-Perot sensors, a Fabry-Perot interferometer was constructed by using the microsphere-lens and the single-mode fiber end face. The experimental results showed that the interference spectrum of the Fabry-Perot interferometer has a good contrast ratio. Integrating the advantages of all-silica structure, simple manufacturing process, low cost, small size, and sturdy construction, the proposed microsphere-lens is expected to be a potential candidate for free-space light coupling and fiber-optic sensors in extreme environments.

Liquid crystal-based sensitive and selective detection of uric acid and uricase in body fluids

The abnormal levels of uric acid (UA) in body fluids are associated with gout, type (II) diabetes, leukemia, Lesch-Nyhan syndrome, uremia, kidney damage, and cardiovascular diseases. Also, the presence of uricase (UOx) symbolizes genetic disorders and corresponding complications. Therefore, the detection of UA and UOx in the body fluids is significant for clinical diagnosis. 4-Cyano-4'-pentylbiphenyl (5CB, a nematic liquid crystal (LC)) was doped with octadecyl trimethylammonium bromide (OTAB, a cationic surfactant), which formed a self-assembled monolayer at the aqueous/5CB interface. The UOx-catalyzed oxidation of UA yielded H₂O₂, releasing the single-strand deoxyribonucleic acid (ssDNA) from the nanoceria/ssDNA complex. The interaction of the released ssDNA with OTAB disrupted the monolayer at the aqueous/5CB interface, which resulted in a dark to bright change when observed through a polarized optical microscope. The LC-based sensor allowed the detection of UA with a linear range of 0.01-10 μM and a limit of detection (LOD) of 0.001 μM. The UA detection was also performed in human urine samples and the results were comparable to that of a standard commercial colorimetric method. Similarly, the detection of UOx was performed, with a noted linear range of 20-140 μg/mL. The LOD was as low as 0.34 μg/mL. The detection of UOx was also demonstrated in human serum samples with excellent performance. This method provides a robust sensing platform for the detection of UA and UOx and has potential for applications in clinical analysis.

A biosensor based on the biomimetic oxidase Fe3O4@MnO2 for colorimetric determination of uric acid

High plasma urate is closely related to gout, cardiovascular and other diseases. Therefore, monitoring the content of uric acid (UA) in plasma is of great significance for the treatment of gout and the prevention of other related diseases. Herein, a biosensor based on the biomimetic oxidase Fe₃O₄ nanoparticles (NPs) @MnO₂ nanosheets (Fe₃O₄@MnO₂ NS) was constructed for colorimetric determination of UA. MnO₂ NS is an efficient biomimetic oxidase, and we found that the intrinsic oxidase activity of MnO₂ NS doped with Fe₃O₄ NPs can be significantly enhanced. The chromogenic substrate TMB can be catalyzed by Fe₃O₄ @MnO₂ NS to generate blue oxidized TMB, and UA can decompose the MnO₂ NS to inhibit the color reaction of TMB selectively, thereby realizing the quantitative detection of UA. In addition, the UA biosensor can perform colorimetric analysis of UA level through three methods: naked eye, smartphone and ultraviolet-visible (UV-vis) spectrophotometer. The linear ranges of UV-vis spectrophotometry and colorimetry with smartphone were 1-70 μM and 200-650 μM, respectively, and the limits of detection (LOD) were 0.27 μM and 21 μM. The analysis results of human plasma samples showed that the method had good selectivity and practicability.

Ablation characteristics and material removal mechanisms of a single-crystal diamond processed by nanosecond or picosecond lasers

The microstructures on a diamond surface have attracted extensive attention in microelectronics, ultra-precision machining tools, and optical elements, etc. In this work, microgrooves were fabricated on a single-crystal diamond surface using ultraviolet nanosecond or infrared picosecond laser pulses. The surface and internal morphologies of the microgrooves were characterized. The chemical composition and phase transition of the diamond after laser irradiation were analyzed. Furthermore, the ablation threshold, ablation rate, and material removal rate of the diamond processed by nanosecond or picosecond lasers were also calculated. In addition, the temperature distributions of the diamond ablated by nanosecond or picosecond lasers were simulated. Finally, the material removal mechanisms of a single-crystal diamond processed by nanosecond or picosecond lasers were revealed. This work is expected helpful to provide a guidance for the laser fabrication of microstructures on diamond.

A graphene oxide coated tapered microfiber acting as a super-sensor for rapid detection of SARS-CoV-2

COVID-19 is a new strain of highly contagious coronavirus, and at present, more than 221.4 million people have been infected with this virus, and the death toll exceeds 2793398. Early and fast detection of COVID-19 from infected individuals is critical to limit its spreading. Here, we report an innovative approach to detect the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) nucleocapsid (N) protein by combining DNA/RNA oligomers as aptamers and a graphene oxide (GO) coated optical microfiber as a sensor system. The DNA/RNA aptamers can effectively capture the SARS-CoV-2 N protein in vitro, with the GO coated optical microfiber aptasensor for real-time monitoring of the SARS-CoV-2 N protein. Due to the extremely high surface-to-volume ratio and excellent optical and biochemical properties of the GO surface layer, the fixing effect of the microfiber surface is significantly improved and the lowest limit of detection (LOD) is 6.25 × 10-19 M. Furthermore, in order to prove the feasibility of this sensing method in clinical applications, we use this sensor to detect the N protein mixed in fetal bovine serum (FBS) samples. The experimental results show that the biosensor can quickly and effectively detect the N protein (1 × 10-9 M) in a complex sample matrix within 3 minutes. These findings suggest that this approach can be utilized for quantitative monitoring of coronavirus particles due to its high sensitivity, which can help to quickly exclude patients who do not have the infection. Collectively, the optical microfiber sensor system could be expected to become an important platform for the diagnosis of coronavirus due to its simple detection scheme and easy miniaturization.

Trends in the Design of Intensity-Based Optical Fiber Biosensors (2010-2020)

There exists an increasing interest in monitoring low concentrations of biochemical species, as they allow the early-stage detection of illnesses or the monitoring of the environment quality. Thus, both companies and research groups are focused on the development of accurate, fast and highly sensitive biosensors. Optical fiber sensors have been widely employed for these purposes because they provide several advantages for their use in point-of-care and real-time applications. In particular, this review is focused on optical fiber biosensors based on luminescence and absorption. Apart from the key parameters that determine the performance of a sensor (limit of detection, sensibility, cross-sensibility, etc.), other features are analyzed, such as the optical fiber dimensions, the sensing set ups and the fiber functionalization. The aim of this review is to have a comprehensive insight of the different aspects that must be taken into account when working with this kind of sensors.

Optimization, fabrication, and performance analysis of SMF-/MMF-based microfiber ball structure

In this paper, four kinds of microfiber ball structure of different sizes, such as 330, 340, 350, and 360 µm were fabricated by single-mode fiber and multimode fiber, respectively. To test its performance, the reflected intensity was measured, and the results showed that the microfiber ball with the largest diameter of 360 µm had the maximum reflected intensity. The 360 µm microfiber ball was characterized by scanning electron microscope. This indicates that compared with a small-diameter microfiber ball, large-diameter microspheres are more suitable to be used as follow-up experimental objects, with the diameter of the fiber ball ranging from 330 to 360 µm.