High-Temperature Piezoelectric Crystals for Acoustic Wave Sensor Applications

CA19-9 and CEA biosensors in pancreatic cancer

Cancer is a complex pathophysiological condition causing millions of deaths each year. Early diagnosis is essential especially for pancreatic cancer. Existing diagnostic tools rely on circulating biomarkers such as Carbohydrate Antigen 19-9 (CA19-9) and Carcinoembryonic Antigen (CEA). Unfortunately, these markers are nonspecific and may be increased in a variety of disorders. Accordingly, diagnosis of pancreatic cancer generally involves more invasive approaches such as biopsy as well as imaging studies. Recent advances in biosensor technology have allowed the development of precise diagnostic tools having enhanced analytical sensitivity and specificity. Herein we examine these advances in the detection of cancer in general and in pancreatic cancer specifically. Furthermore, we highlight novel technologies in the measurement of CA19-9 and CEA and explore their future application in the early detection of pancreatic cancer.

Analysis of SAW Temperature Properties in KTiOPO4 Single Crystal

The surface acoustic wave (SAW) properties of potassium titanyl phosphate (KTiOPO₄, KTP) single crystal were evaluated by numerical methods. The phase velocity, electromechanical coupling coefficient, power flow deflection angle, and temperature coefficient of delay (TCD) were determined for different crystal cuts of KTP. It was shown that SAW has the electromechanical coupling coefficient of 0.59% and the TCD of 62 ppm/°C on the Z-cut and wave propagation direction along the crystal X + 70°-axis. For the Z-cut and wave propagation direction along the X-axis, the pseudo-surface wave (PSAW) is characterized by the coupling coefficient of 0.46% and the TCD value of 57 ppm/°C. The Bleustein-Gulyaev (BG) wave has the TCD value of 35 ppm/°C and 41 ppm/°C on the Y- and X-cuts of KTP, respectively.

Improved Extraction of Second-Order Material Constants for Current Generation Y-Grown La₃Ga5.5Nb0.5O₁₄ (LGN) Crystal

With higher demand for sensor development, piezoelectric materials with advanced performance and wide availability draw more attention today. Accurate second-order material constants are necessary for modeling and mechanical design of sensors that make use of langanite (La₃Ga_5.5Nb_0.5O₁₄, LGN) crystals. We report here on room temperature LGN bulk acoustic wave (BAW) velocities obtained with reduced uncertainties using ultrasound measurements and taking advantage of the cross correlation signal processing technique, and a full set of LGN material constants extracted from the BAW velocity results. Our results compare favorably with prior results assessed as using a reliable measurement technique, and differ in expected fashion from other results based on techniques that do not address a known weakness in the measurement technique.

A Review on High Temperature Piezoelectric Crystal La3Ga5SiO14 for Sensor Applications

In this review article, we have investigated the credibility and suitability of the lanthanum gallium silicate (La₃Ga₅SiO₁₄, LGS) crystals in the application of high-temperature sensing. All the basic properties of the langasite family piezoelectric crystals, such as elastic properties, are taken into consideration and discussed. The crosstalk effects between different vibration modes of LGS crystal are investigated to optimize the crystal cuts. Thereafter, dependences of properties, such as electroelastic properties, resistivity, and electromechanical coupling coefficients of langasite family crystals on higher temperatures, are discussed. Finally, thermal-related properties of langasite family crystals, such as specific heat as well as thermal expansion coefficients, are studied for higher temperature ranges and a comparison with other piezoelectric crystals has also been presented.

Acoustic Biosensors and Microfluidic Devices in the Decennium: Principles and Applications

Lab-on-a-chip (LOC) technology has gained primary attention in the past decade, where label-free biosensors and microfluidic actuation platforms are integrated to realize such LOC devices. Among the multitude of technologies that enables the successful integration of these two features, the piezoelectric acoustic wave method is best suited for handling biological samples due to biocompatibility, label-free and non-invasive properties. In this review paper, we present a study on the use of acoustic waves generated by piezoelectric materials in the area of label-free biosensors and microfluidic actuation towards the realization of LOC and POC devices. The categorization of acoustic wave technology into the bulk acoustic wave and surface acoustic wave has been considered with the inclusion of biological sample sensing and manipulation applications. This paper presents an approach with a comprehensive study on the fundamental operating principles of acoustic waves in biosensing and microfluidic actuation, acoustic wave modes suitable for sensing and actuation, piezoelectric materials used for acoustic wave generation, fabrication methods, and challenges in the use of acoustic wave modes in biosensing. Recent developments in the past decade, in various sensing potentialities of acoustic waves in a myriad of applications, including sensing of proteins, disease biomarkers, DNA, pathogenic microorganisms, acoustofluidic manipulation, and the sorting of biological samples such as cells, have been given primary focus. An insight into the future perspectives of real-time, label-free, and portable LOC devices utilizing acoustic waves is also presented. The developments in the field of thin-film piezoelectric materials, with the possibility of integrating sensing and actuation on a single platform utilizing the reversible property of smart piezoelectric materials, provide a step forward in the realization of monolithic integrated LOC and POC devices. Finally, the present paper highlights the key benefits and challenges in terms of commercialization, in the field of acoustic wave-based biosensors and actuation platforms.

Piezoelectric Based Touch Sensing for Interactive Displays-A Short Review

Interactive display is an important part of electronic devices. It is widely used in smartphones, laptops, and industrial equipment. To achieve 3-dimensional detection, the piezoelectric touch panel gains great popularity for its advantages of high sensitivity, low cost, and simple structure. In order to help readers understand the basic principles and the current technical status, this article introduces the work principles of the piezoelectric touch panel, widely-used piezoelectric materials and their characteristics, as well as the applications of the piezoelectric touch panel. The challenges and future trends are also discussed.

A Review on the Role of Nanosensors in Detecting Cellular miRNA Expression in Colorectal Cancer

BACKGROUND

Colorectal cancer (CRC) is one of the leading causes of death across the globe. Early diagnosis with high sensitivity can prevent CRC progression, thereby reducing the condition of metastasis.

OBJECTIVE

The purpose of this review is (i) to discuss miRNA based biomarkers responsible for CRC, (ii) to brief on the different methods used for the detection of miRNA in CRC, (iii) to discuss different nanobiosensors so far found for the accurate detection of miRNAs in CRC using spectrophotometric detection, piezoelectric detection.

METHODS

The keywords for the review like micro RNA detection in inflammation, colorectal cancer, nanotechnology, were searched in PubMed and the relevant papers on the topics of miRNA related to CRC, nanotechnology-based biosensors for miRNA detection were then sorted and used appropriately for writing the review.

RESULTS

The review comprises a general introduction explaining the current scenario of CRC, the biomarkers used for the detection of different cancers, especially CRC and the importance of nanotechnology and a general scheme of a biosensor. The further subsections discuss the mechanism of CRC progression, the role of miRNA in CRC progression and different nanotechnology-based biosensors so far investigated for miRNA detection in other diseases, cancer and CRC. A scheme depicting miRNA detection using gold nanoparticles (AuNPs) is also illustrated.

CONCLUSION

This review may give insight into the different nanostructures, like AuNPs, quantum dots, silver nanoparticles, MoS2derived nanoparticles, etc., based approaches for miRNA detection using biosensors.

On the Room-Temperature Creep Behavior and Its Correlation with Length Scale of a Litao3 Single Crystal by Spherical Nanoindentation

Relying on nanoindentation technology, the room-temperature creep behavior of a LiTaO₃ single crystal in the typical orientation (01 1 ¯ 2), i.e., Y-42° plane was investigated. Three kinds of spherical tips with the radii of 0.76, 2.95 and 9.8 μm were respectively applied to detect nanoindentation length scale effect on creep deformation at both elastic and plastic regions. Superficially, both creep displacement and rate were nearly linearly increased with increasing holding depth and independent of tip size, which could be ascribed to the simultaneously enlarged holding strain and deformation volume beneath the indenter. At a similar holding strain, creep deformation, i.e., creep strain and strain rate were more pronounced under smaller spherical tips. Strain rate sensitivities of creep flows under different spherical tips and holding strains were also estimated. The potential room-temperature creep mechanism of LiTaO₃ under high shear compression stress was discussed.

Orientation-Independent Yield Stress and Activation Volume of Dislocation Nucleation in LiTaO3 Single Crystal by Nanoindentation

Relying on nanoindentation technology, we investigated the elastic-to-plastic transition via first pop-in event and estimated the corresponding shear stress for incipient plasticity, i.e., yielding in the three typical orientations, i.e., X-112°, Y-36°, and Y-42° planes. The occurrence of incipient plasticity exhibited a stochastic distribution in a wide range for the three orientations. Accordingly, the obtained values of yield stress were uniform and scattered in the range from about 4 to 7 GPa for LiTaO₃ single crystal. The orientation effect on yield stress at the nano-scale was revealed to be insignificant in LiTaO₃ single crystal. The yield stresses were 5.44 ± 0.41, 5.74 ± 0.59, and 5.34 ± 0.525 GPa for the X-112°, Y-36°, and Y-42° planes, respectively. The activation volumes of dislocation nucleation were computed based on the cumulative distribution of yield stress, which were 12 ų, 8 ų, and 9 ų for the X-112°, Y-36°, and Y-42° planes. The results indicated that point-like defects could be the source of plastic initiation on the surface of LiTaO₃ single crystal.

Room-Temperature Creep Behavior and Activation Volume of Dislocation Nucleation in a LiTaO3 Single Crystal by Nanoindentation

The crystal orientation effect on mechanical heterogeneity of LiTaO₃ single crystals is well known, whilst the time-dependent plastic behavior, i.e., creep is still short of understanding. Relying on nanoindentation technology, we systematically studied room-temperature creep flows at various holding depths (100 nm to 1100 nm) in three typical orientations namely the X-112°, Y-36° and Y-42° planes. Creep resistance was much stronger in the X-112° plane than the others. In the meanwhile, creep features were similar in the Y-36° and Y-42° planes. The orientation effect on creep deformation was consistent with that on hardness. The nanoindentation length scale played an important role in creep deformation that creep strains were gradually decreased with the holding depth in all the planes. Based on strain rate sensitivity and yield stress, the activation volumes of dislocation nucleation were computed at various nanoindentation depths. The activation volumes ranged from 5 ų to 23 ų for the Y-36° and Y-42° planes, indicating that a point-like defect could be the source of plastic initiation. In the X-112° plane, the activation volume was between 6 ų and 83 ų. Cooperative migration of several atoms could also be the mechanism of dislocation activation at deep nanoindentation.

Thermal Expansion and Electro-Elastic Features of Ba2TiSi2O8 High Temperature Piezoelectric Crystal

A high-quality Ba2TiSi2O8 (BTS) single crystal was grown using the Czochralski (Cz) pulling method. The thermal expansion and electro-elastic properties of BTS crystal were studied for high temperature sensor applications. The relative dielectric permittivities ε 11 T / ε 0 and ε 33 T / ε 0 were determined to be 16.3 and 11.8, while the piezoelectric coefficients d15, d31, d33 were found to be 17.8, 2.9, and 4.0 pC/N, respectively. Temperature dependence of electro-elastic properties were investigated, where the variation of elastic compliance s 55 E (= s 44 E ) was found to be <6% over temperature range of 20–700 °C. Taking advantage of the anisotropic thermal expansion, linear thermal expansion comparable to insulating alumina ceramic was achieved over temperature range up to 650 °C. The optimum crystal cut with large effective piezoelectric coefficient (>8.5 pC/N) and linear thermal expansion coefficient (8.03 ppm/°C) achieved for BTS crystal along the (47°, φ) direction (φ is arbitrary in 0–360°), together with its good temperature stability up to 650 °C, make BTS crystal a promising candidate for high temperature piezoelectric sensors.

Current Conjugation Methods for Immunosensors

Recent advances in the development of immunosensors using polymeric nanomaterials and nanoparticles have enabled a wide range of new functions and applications in diagnostic and prognostic research. One fundamental challenge that all immunosensors must overcome is to provide the specificity of target molecular recognition by immobilizing antibodies, antibody fragments, and/or other peptides or oligonucleotide molecules that are capable of antigen recognition on a compact device surface. This review presents progress in the application of immobilization strategies including the classical adsorption process, affinity attachment, random cross-linking and specific covalent linking. The choice of immobilization methods and its impact on biosensor performance in terms of capture molecule loading, orientation, stability and capture efficiency are also discussed in this review.

Overview of Piezoelectric Biosensors, Immunosensors and DNA Sensors and Their Applications

Piezoelectric biosensors are a group of analytical devices working on a principle of affinity interaction recording. A piezoelectric platform or piezoelectric crystal is a sensor part working on the principle of oscillations change due to a mass bound on the piezoelectric crystal surface. In this review, biosensors having their surface modified with an antibody or antigen, with a molecularly imprinted polymer, with genetic information like single stranded DNA, and biosensors with bound receptors of organic of biochemical origin, are presented and discussed. The mentioned recognition parts are frequently combined with use of nanoparticles and applications in this way are also introduced. An overview of the current literature is given and the methods presented are commented upon.

Quartz Crystal Microbalance Electronic Interfacing Systems: A Review

Quartz Crystal Microbalance (QCM) sensors are actively being implemented in various fields due to their compatibility with different operating conditions in gaseous/liquid mediums for a wide range of measurements. This trend has been matched by the parallel advancement in tailored electronic interfacing systems for QCM sensors. That is, selecting the appropriate electronic circuit is vital for accurate sensor measurements. Many techniques were developed over time to cover the expanding measurement requirements (e.g., accommodating highly-damping environments). This paper presents a comprehensive review of the various existing QCM electronic interfacing systems. Namely, impedance-based analysis, oscillators (conventional and lock-in based techniques), exponential decay methods and the emerging phase-mass based characterization. The aforementioned methods are discussed in detail and qualitatively compared in terms of their performance for various applications. In addition, some theoretical improvements and recommendations are introduced for adequate systems implementation. Finally, specific design considerations of high-temperature microbalance systems (e.g., GaPO₄ crystals (GCM) and Langasite crystals (LCM)) are introduced, while assessing their overall system performance, stability and quality compared to conventional low-temperature applications.