HIFU Drive System Miniaturization Using Harmonic Reduced Pulsewidth Modulation

[Development of a high intensity focused ultrasound device for bio-samples preparation]

A miniaturized, low-cost high-intensity focused ultrasound device is developed for the problems of cross-contamination and uneven sample fragmentation in conventional ultrasound devices. This device generates ultrasonic waves through a concave spherical self-focusing piezoelectric ceramic piece, and creates a cavitation effect in the focusing area to achieve sample fragmentation. The feasibility of the device is demonstrated by physical simulation, then a driving circuit with adjustable power is designed and manufactured to generate 0 ~ 22.4 W acoustic power, and finally paraffin-embedded sample dewaxing experiments are performed to verify the validation of the device. The experimental results show that the dewaxing efficiency and safety of the high-intensity focused ultrasound device is significantly better than those of traditional chemical methods, and this device is comparable with commercial ultrasonic instruments. In summary, the high-intensity focused ultrasound device is expected to be applied in automated nucleic acid extraction and purification equipment and has a broad application prospect in the field of sample pre-processing.

Review of the design of power ultrasonic generator for piezoelectric transducer

The power ultrasonic generator (PUG) is the core device of power ultrasonic technology (PUT), and its performance determines the application of this technology in biomedicine, semiconductor, aerospace, and other fields. With the high demand for sensitive and accurate dynamic response in power ultrasonic applications, the design of PUG has become a hot topic in academic and industry. However, the previous reviews cannot be used as a universal technical manual for industrial applications. There are many technical difficulties in establishing a mature production system, which hinder the large-scale application of PUG for piezoelectric transducers. To enhance the performance of the dynamic matching and power control of PUG, the studies in various PUT applications have been reviewed in this article. Initially, the demand design covering the piezoelectric transducer application and parameter requirements for ultrasonic and electrical signals is overall summarized, and these parameter requirements have been recommended as the technical indicators of developing the new PUG. Then the factors affecting the power conversion circuit design are analyzed systematically to realize the foundational performance improvement of PUG. Furthermore, advantages and limitations of key control technologies have been summarized to provide some different ideas on how to realize automatic resonance tracking and adaptive power adjustment, and to optimize the power control and dynamic matching control. Finally, several research directions of PUG in the future have been prospected.

An automated system for nucleic acid extraction from formalin-fixed paraffin-embedded samples using high intensity focused ultrasound technology

Formalin-fixed paraffin-embedded (FFPE) tissue samples are routinely used in prospective and retrospective studies. It is crucial to obtain high-quality nucleic acid (NA) from FFPE samples for downstream molecular analysis, such as quantitative polymerase chain reaction (PCR), Sanger sequencing, next-generation sequencing, and microarray, in both clinical diagnosis and basic research. The current NA extraction methods from FFPE samples using chemical solvent are tedious, environmentally unfriendly, and unamenable to automation or field deployment. We present a tool for NA extraction from FFPE samples using a high-intensity focused ultrasound (HIFU) technology. A cartridge strip containing reagents for FFPE sample deparaffinization and NA extraction and purification is operated by an automation tool consisting of a HIFU module, a liquid handling robot unit, and accessories including a thermal block and magnets. The HIFU module is a single concaved piezoelectric ceramic plate driven by a current-mode class-D power amplifier. Based on the ultrasonic cavitation effects, the HIFU module provides highly concentrated energy introducing paraffin emulsification and disintegration. The high quantity and quality of NA extracted using the reported system are evaluated by PCR and compared with the quantity and quality of NA extracted using the current standard methods.

A Preclinical System Prototype for Focused Microwave Breast Hyperthermia Guided by Compressive Thermoacoustic Tomography

OBJECTIVE

As a newly developed technique, focused microwave breast hyperthermia (FMBH) can provide accurate and cost-effective treatment of breast tumors with low side effect. A clinically feasible FMBH system requires a guidance technique to monitor the microwave power distribution in the breast. Compressive thermoacoustic tomography (CTT) is a suitable guidance approach for FMBH, which is more cost-effective than MRI. However, no experimental validation based on a realized FMBH-CTT system has been reported, which greatly hinders the further advancement of this novel approach.

METHODS

We developed a preclinical system prototype for the FMBH-CTT technique, containing a microwave phased antenna array, a microwave source, an ultrasound transducer array and associated data acquisition module.

RESULTS

Experimental results employing homogeneous and inhomogeneous breast-mimicking phantoms demonstrate that the CTT technique can offer reliable guidance for the entire process of the FMBH. In addition, small phase noises do not deteriorate the overall performance of the system prototype.

CONCLUSION

The realized preclinical FMBH-CTT system prototype is capable for noninvasive, accurate and low-side-effect breast tumor treatment with effective guidance.

SIGNIFICANCE

The experimentally validated FMBH-CTT system prototype provides a feasible paradigm for CTT guided FMBH, establishes a practical platform for future improvement of this technique, and paves the way for potential clinical translation.

High-Power Gallium Nitride HIFU Transmitter With Integrated Real-Time Current and Voltage Measurement

High-Intensity Focused Ultrasound (HIFU) therapy provides a non-invasive technique with which to destroy cancerous tissue without using ionizing radiation. To drive large single-element High-Intensity Focused Ultrasound (HIFU) transducers, ultrasound transmitters capable of delivering high powers at relevant frequencies are required. The acoustic power delivered to a transducers focal region will determine the treated area, and due to safety concerns and intervening layers of attenuation, control of this output power is critical. A typical setup involves large inefficient linear power amplifiers to drive the transducer. Switched mode transmitters allow for a more compact drive system with higher efficiencies, with multi-level transmitters allowing control over the output power. Real-time monitoring of power delivered can avoid damage to the transducer and injury to patients due to over treatment, and allow for precise control over the output power. This study demonstrates a transformer-less, high power, switched mode transmit transmitter based on Gallium-Nitride (GaN) transistors that is capable of delivering peak powers up to 1.8 kW at up to 600 Vpp, while operating at frequencies from DC to 5 MHz. The design includes a 12 b 16 MHz floating Current/Voltage (IV) measurement circuit to allow real-time high-side monitoring of the power delivered to the transducer allowing use with multi-element transducers.

HIFU Power Monitoring Using Combined Instantaneous Current and Voltage Measurement

During high-intensity focused ultrasound (HIFU) therapy, it is important that the electrical power delivered to the transducer is monitored to avoid underexposure or overexposure, ensure patient safety, and to protect the transducer itself. Due to ease of measurement, the transducer's potential difference may be as an indicator of power delivery. However, even when a transducer's complex impedance is well characterized at small amplitudes and matching networks are used, voltage-only (VO) monitoring cannot account for the presence of drive waveform distortion, changes to the acoustic path, or damage to the transducer. In this study, combined current and voltage (CCV) is proposed as a magnetic resonance imaging (MRI)-compatible, miniature alternative to bidirectional power couplers, which is compatible with switched amplifiers. For CCV power measurement, current probe data were multiplied by the voltage waveform and integrated in the frequency domain. Transducer efficiency was taken into account to predict acoustic power. The technique was validated with a radiation force balance (RFB). When using a typical HIFU transducer and amplifier, VO predictions and acoustic power had a maximum difference of 20%. However, under the same conditions, CCV only had a maximum difference of 5%. The technique was applied to several lesioning experiments and it was shown that when VO was used as a control between two amplifiers, there was up to a 38% difference in lesion area. This greatly reduced to a maximum of 5% once CCV was used instead. These results demonstrate that CCV can accurately predict real-time electrical power delivery, leading to safer HIFU treatments.