A new protein folding screen: application to the ligand binding domains of a glutamate and kainate receptor and to lysozyme and carbonic anhydrase

Capture and neutralization of SARS-CoV-2 and influenza virus by algae-derived lectins with high-mannose and core fucose specificities

We first investigated the interactions between several algae-derived lectins and severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2). We created lectin columns using high-mannose (HM)-type glycan-specific lectins OAA and KAA-1 or core fucose-specific lectin hypninA-2 and conducted binding experiments with SARS-CoV-2. The results showed that these lectins were capable of binding to the virus. Furthermore, when examining the neutralization ability of nine different lectins, it was found that KAA-1, ESA-2, and hypninA-2 were effective in neutralizing SARS-CoV-2. In competitive inhibition experiments with glycoproteins, neutralization was confirmed to occur through HM-type or core fucose-type glycans. However, neutralization was not observed with other lectins, such as OAA. This trend of KAA-1 and ESA-2 having the neutralizing ability and OAA not having it was also similar to influenza viruses. Electron microscopy observations revealed that KAA-1 and hypninA-2 strongly aggregated SARS-CoV-2 particles, while OAA showed a low degree of aggregation. It is believed that the neutralization of SARS-CoV-2 involves multiple factors, such as glycan attachment sites on the S protein, the size of lectins, and their propensity to aggregate, which cause inhibition of receptor binding or aggregation of virus particles. This study demonstrated that several algae-derived lectins could neutralize SARS-CoV-2 and that lectin columns can effectively recover and concentrate the virus.

A High-Throughput Automated Protein Folding System

In vitro protein folding can be employed to produce complex proteins expressed as insoluble inclusion bodies in E. coli from laboratory to commercial scale. Often the most challenging step is identification of renaturation conditions that will enable the denatured protein to form the native structure at an acceptable yield. Generally this requires screening a matrix of buffers and stabilizers to find an appropriate solution. Herein, we describe an automated and quantitative method to identify optimal in vitro protein folding parameters with a high rate of success.

Automated high-throughput dense matrix protein folding screen using a liquid handling robot combined with microfluidic capillary electrophoresis

Modern molecular genetics technology has made it possible to swiftly sequence, clone and mass-produce recombinant DNA for the purpose of expressing heterologous genes of interest; however, recombinant protein production systems have struggled to keep pace. Mammalian expression systems are typically favored for their ability to produce and secrete proteins in their native state, but bacterial systems benefit from rapid cell line development and robust growth. The primary drawback to prokaryotic expression systems are that recombinant proteins are generally not secreted at high levels or correctly folded, and are often insoluble, necessitating post-expression protein folding to obtain the active product. In order to harness the advantages of prokaryotic expression, high-throughput methods for executing protein folding screens and the subsequent analytics to identify lead conditions are required. Both of these tasks can be accomplished using a Biomek 3000 liquid handling robot to prepare the folding screen and to subsequently prepare the reactions for assessment using Caliper microfluidic capillary electrophoresis. By augmenting a protein folding screen with automation, the primary disadvantage of Escherichia coli expression has been mitigated, namely the labor intensive identification of the required protein folding conditions. Furthermore, a rigorous, quantitative method for identifying optimal protein folding buffer aids in the rapid development of an optimal production process.

Refolding process of cysteine-rich proteins:Chitinase as a model

BACKGROUND

Recombinant proteins overexpressed in E. coli are usually deposited in inclusion bodies. Cysteines in the protein contribute to this process. Inter- and intra- molecular disulfide bonds in chitinase, a cysteine-rich protein, cause aggregation when the recombinant protein is overexpressed in E. coli. Hence, aggregated proteins should be solubilized and allowed to refold to obtain native- or correctly- folded recombinant proteins.

METHODS

Dilution method that allows refolding of recombinant proteins, especially at high protein concentrations, is to slowly add the soluble protein to refolding buffer. For this purpose: first, the inclusion bodies containing insoluble proteins were purified; second, the aggregated proteins were solubilized; finally, the soluble proteins were refolded using glutathione redox system, guanidinium chloride, dithiothreitol, sucrose, and glycerol, simultaneously.

RESULTS

After protein solubilization and refolding, SDS-PAGE showed a 32 kDa band that was recognized by an anti-chitin antibody on western blots.

CONCLUSIONS

By this method, cysteine-rich proteins from E. coli inclusion bodies can be solubilized and correctly folded into active proteins.

Overview of the purification of recombinant proteins

When the first version of this unit was written in 1995, protein purification of recombinant proteins was based on a variety of standard chromatographic methods and approaches, many of which were described and mentioned throughout Current Protocols in Protein Science. In the interim, there has been a shift toward an almost universal usage of the affinity or fusion tag. This may not be the case for biotechnology manufacture where affinity tags can complicate producing proteins under regulatory conditions. Regardless of the protein expression system, questions are asked as to which and how many affinity tags to use, where to attach them in the protein, and whether to engineer a self-cleavage system or simply leave them on. We will briefly address some of these issues. Also, although this overview focuses on E.coli, protein expression and purification, other commonly used expression systems are mentioned and, apart from cell-breakage methods, protein purification methods and strategies are essentially the same.

Successful development and use of a thermodynamic stability screen for optimizing the yield of nucleotide binding domains

ATP sensitive potassium (KATP) channels consist of four copies of a pore-forming inward rectifying potassium channel (Kir6.1 or Kir6.2) and four copies of a sulfonylurea receptor (SUR1, SUR2A, or SUR2B). SUR proteins are members of the ATP-binding cassette superfamily of proteins. Binding of ATP to the Kir6.x subunit mediates channel inhibition, whereas MgATP binding and hydrolysis at the SUR NBDs results in channel opening. Mutations in SUR1 and SUR2A NBDs cause diseases of insulin secretion and cardiac disorders, respectively, underlying the importance of studying the NBDs. Although purification of SUR2A NBD1 in a soluble form is possible, the lack of long-term sample stability of the protein in a concentrated form has precluded detailed studies of the protein aimed at gaining a molecular-level understanding of how SUR mutations cause disease. Here we use a convenient and cost-effective thermodynamic screening method to probe stabilizing conditions for SUR2A NBD1. Results from the screen are used to alter the purification protocol to allow for significantly increased yields of the purified protein. In addition, the screen provides strategies for long-term storage of NBD1 and generating NBD1 samples at high concentrations suitable for NMR studies. NMR spectra of NBD1 with MgAMP-PNP are of higher quality compared to using MgATP, indicating that MgAMP-PNP be used as the ligand in future NMR studies. The screen presented here can be expanded to using different additives and can be employed to enhance purification yields, sample life times, and storage of other low stability nucleotide binding domains, such as GTPases.

Oxidative refolding from inclusion bodies

This protocol describes the growth and purification of bacterial inclusion body proteins with an option to selenomethionine label the targeted protein through feedback inhibition of methionine biosynthesis in common (non-auxotrophic) strains of E. coli. The method includes solubilization of inclusion body proteins by chemical denaturation and disulfide reduction, renaturation of the solubilized material through rapid dilution by pulsed injection into refolding buffer containing arginine and a mixture of oxidized and reduced glutathione, recovery of the recombinant protein using a stirred cell concentrator, and removal of the aggregated or misfolded fraction by passage over size-exclusion chromatography. The quality of the resulting protein can be assessed by SDS-PAGE.

Statistical approaches to maximize recombinant protein expression in Escherichia coli: a general review

The supply of many valuable proteins that have potential clinical or industrial use is often limited by their low natural availability. With the modern advances in genomics, proteomics and bioinformatics, the number of proteins being produced using recombinant techniques is exponentially increasing and seems to guarantee an unlimited supply of recombinant proteins. The demand of recombinant proteins has increased as more applications in several fields become a commercial reality. Escherichia coli (E. coli) is the most widely used expression system for the production of recombinant proteins for structural and functional studies. However, producing soluble proteins in E. coli is still a major bottleneck for structural biology projects. One of the most challenging steps in any structural biology project is predicting which protein or protein fragment will express solubly and purify for crystallographic studies. The production of soluble and active proteins is influenced by several factors including expression host, fusion tag, induction temperature and time. Statistical designed experiments are gaining success in the production of recombinant protein because they provide information on variable interactions that escape the "one-factor-at-a-time" method. Here, we review the most important factors affecting the production of recombinant proteins in a soluble form. Moreover, we provide information about how the statistical design experiments can increase protein yield and purity as well as find conditions for crystal growth.

Development and characterization of an automated high throughput screening method for optimization of protein refolding processes

Optimization of protein refolding parameters by automated, miniaturized, and parallelized high throughput screening is a powerful approach to meet the demand for fast process development with low material consumption. In this study, we validated methods applicable on a standard liquid handling robot for screening of refolding process parameters by dilution of denatured lysozyme in refolding buffer systems. Different approaches for the estimation of protein solubility and folding were validated concerning resolution and compatibility with the robotic system and with the complex buffer and protein structure composition. We established an indirect method to assess soluble lysozyme concentration independent of matrix effects and protein structure varieties by automated separation of aggregated protein, resolubilization, and measurement of absorption at 280 nm. Using this nonspecific solubility assays the correlation between favorable parameters for high active and soluble lysozyme yields were evaluated. An overlap of good refolding buffer compositions was found provided that the redox environment was controlled with redox reagents. In addition, the need to control unfolding conditions like time, temperature, lysozyme, and dithiothreitol concentration was pointed out as different feedstocks resulted in different refolding yields.

A strategy for the expression of recombinant proteins traditionally hard to purify

We have developed a series of plasmid vectors for the soluble expression and subsequent purification of recombinant proteins that have historically proven to be extremely difficult to purify from Escherichia coli. Instead of dramatically overproducing the target protein, it is expressed at a low basal level that facilitates the correct folding of the recombinant protein and increases its solubility. Highly active recombinant proteins that are traditionally difficult to purify are readily purified using standard affinity tags and conventional chromatography. To demonstrate the utility of these vectors, we have expressed and purified full-length human DNA polymerases η, ι, and ν from E. coli and show that the purified DNA polymerases are catalytically active in vitro.

Recombinant expression, in vitro refolding, and biophysical characterization of the N-terminal domain of T1R3 taste receptor

The sweet taste receptor is a heterodimeric receptor composed of the T1R2 and T1R3 subunits, while T1R1 and T1R3 assemble to form the umami taste receptor. T1R receptors belong to the family of class C G-protein coupled receptors (GPCRs). In addition to a transmembrane heptahelical domain, class C GPCRs have a large extracellular N-terminal domain (NTD), which is the primary ligand-binding site. The T1R2 and T1R1 subunits have been shown to be responsible for ligand binding, via their NTDs. However, little is known about the contribution of T1R3-NTD to receptor functions. To enable biophysical characterization, we overexpressed the human NTD of T1R3 (hT1R3-NTD) using Escherichia coli in the form of inclusion bodies. Using a fractional factorial screen coupled to a functional assay, conditions were determined for the refolding of hT1R3-NTD. Far-UV circular dichroism spectroscopic studies revealed that hT1R3-NTD was well refolded. Using size-exclusion chromatography, we found that the refolded protein behaves as a dimer. Ligand binding quantified by tryptophan fluorescence quenching and microcalorimetry showed that hT1R3-NTD is functional and capable of binding sucralose with an affinity in the millimolar range. This study also provides a strategy to produce functional hT1R3-NTD by heterologous expression in E. coli; this is a prerequisite for structural determination and functional analysis of ligand-binding regions of other class C GPCRs.

Single pH buffer refolding screen for protein from inclusion bodies

We previously reported the set up of an automated test for screening the refolding of recombinant proteins expressed as inclusion bodies in Escherichia coli[1]. The screen used 96 refolding buffers and was validated with 24 proteins, 70% of which remained soluble in at least one buffer. In the present paper, we have analyzed in more detail these experimental data to see if the refolding process can be driven by general rules. Notably, we found that proteins with an acidic isoelectric point (pI) refolded in buffers the average pH of which was alkaline and conversely. In addition, the number of refolding buffers wherein a protein remained soluble increased with the difference between its pI and the average pH of the buffers in which it refolded. A trend analysis of the other variables (ionic strength, detergents, etc.) was also performed. On the basis of this analysis, we devised and validated a new refolding screen made of a single buffer for acidic proteins and a single buffer for alkaline proteins.

Soluble expression, purification and characterization of the full length IS2 Transposase

BACKGROUND

The two-step transposition pathway of insertion sequences of the IS3 family, and several other families, involves first the formation of a branched figure-of-eight (F-8) structure by an asymmetric single strand cleavage at one optional donor end and joining to the flanking host DNA near the target end. Its conversion to a double stranded minicircle precedes the second insertional step, where both ends function as donors. In IS2, the left end which lacks donor function in Step I acquires it in Step II. The assembly of two intrinsically different protein-DNA complexes in these F-8 generating elements has been intuitively proposed, but a barrier to testing this hypothesis has been the difficulty of isolating a full length, soluble and active transposase that creates fully formed synaptic complexes in vitro with protein bound to both binding and catalytic domains of the ends. We address here a solution to expressing, purifying and structurally analyzing such a protein.

RESULTS

A soluble and active IS2 transposase derivative with GFP fused to its C-terminus functions as efficiently as the native protein in in vivo transposition assays. In vitro electrophoretic mobility shift assay data show that the partially purified protein prepared under native conditions binds very efficiently to cognate DNA, utilizing both N- and C-terminal residues. As a precursor to biophysical analyses of these complexes, a fluorescence-based random mutagenesis protocol was developed that enabled a structure-function analysis of the protein with good resolution at the secondary structure level. The results extend previous structure-function work on IS3 family transposases, identifying the binding domain as a three helix H + HTH bundle and explaining the function of an atypical leucine zipper-like motif in IS2. In addition gain- and loss-of-function mutations in the catalytic active site define its role in regional and global binding and identify functional signatures that are common to the three dimensional catalytic core motif of the retroviral integrase superfamily.

CONCLUSIONS

Intractably insoluble transposases, such as the IS2 transposase, prepared by solubilization protocols are often refractory to whole protein structure-function studies. The results described here have validated the use of GFP-tagging and fluorescence-based random mutagenesis in overcoming this limitation at the secondary structure level.

A high-throughput immobilized bead screen for stable proteins and multi-protein complexes

We describe an in vitro colony screen to identify Escherichia coli expressing soluble proteins and stable, assembled multiprotein complexes. Proteins with an N-terminal 6His tag and C-terminal green fluorescent protein (GFP) S11 tag are fluorescently labeled in cells by complementation with a coexpressed GFP 1-10 fragment. After partial colony lysis, the fluorescent soluble proteins or complexes diffuse through a supporting filtration membrane and are captured on Talon(®) resin metal affinity beads immobilized in agarose. Images of the fluorescent colonies convey total expression and the level of fluorescence bound to the beads indicates how much protein is soluble. Both pieces of information can be used together when selecting clones. After the assay, colonies can be picked and propagated, eliminating the need to make replica plates. We used the method to screen a DNA fragment library of the human protein p85 and preferentially obtained clones expressing the full-length 'breakpoint cluster region-homology' and NSH2 domains. The assay also distinguished clones expressing stable multi-protein complexes from those that are unstable due to missing subunits. Clones expressing stable, intact heterotrimeric E.coli YheNML complexes were readily identified in libraries dominated by complexes of YheML missing the N subunit.

Cloning, expression and purification of the CCN family of proteins in Escherichia coli

The CCN proteins are extracellular matrix associated proteins involved in critical cell activities and several aggressive forms of cancer. The proteins share a modular structure of four discrete domains and 38 conserved cysteine residues. The absence of any structural information of these proteins has resulted in a need for the ability to produce substantial amounts of pure CCN protein. Through bacterial expression and inclusion body based purification, pure recombinant CCN proteins have been produced for use in structural and biochemical experiments.

Experimental optimization of protein refolding with a genetic algorithm

Refolding of proteins from solubilized inclusion bodies still represents a major challenge for many recombinantly expressed proteins and often constitutes a major bottleneck. As in vitro refolding is a complex reaction with a variety of critical parameters, suitable refolding conditions are typically derived empirically in extensive screening experiments. Here, we introduce a new strategy that combines screening and optimization of refolding yields with a genetic algorithm (GA). The experimental setup was designed to achieve a robust and universal method that should allow optimizing the folding of a variety of proteins with the same routine procedure guided by the GA. In the screen, we incorporated a large number of common refolding additives and conditions. Using this design, the refolding of four structurally and functionally different model proteins was optimized experimentally, achieving 74-100% refolding yield for all of them. Interestingly, our results show that this new strategy provides optimum conditions not only for refolding but also for the activity of the native enzyme. It is designed to be generally applicable and seems to be eligible for all enzymes.

L-arginine hydrochloride increases the solubility of folded and unfolded recombinant plasminogen activator rPA

L-arginine hydrochloride (L-ArgHCl) was found to be an effective enhancer for in vitro protein refolding more than two decades ago. A detailed understanding of the mechanism of action, by which L-ArgHCl as co-solvent is capable to effectively suppress protein aggregation, while protein stability is preserved, has remained elusive. Concepts for the effects of co-solvents, which have been established over the last decades, were found to be insufficient to completely explain the effects of L-ArgHCl on protein refolding. In this article, we present data, which clearly establish that L-ArgHCl acts on the equilibrium solubility of the native model protein recombinant plasminogen activator (rPA), while for S-carboxymethylated rPA (IAA-rPA) that served as a model protein for denatured protein states, equilibrium solubilities could not be obtained. Solid to solute free transfer energies for native rPA were lowered by up to 14 kJ mol(-1) under the tested conditions. This finding is in marked contrast to a previously proposed model in which L-ArgHCl acts as a neutral crowder which exclusively has an influence on the stability of the transition state of aggregation. The effects on the apparent solubility of IAA-rPA, as well as on the aggregation kinetics of all studied protein species, that were observed in the present work could tentatively be explained within the framework of a nucleation-aggregation scheme, in which L-ArgHCl exerts a strong effect on the pre-equilibria leading to formation of the aggregation seed.

Biochemical characterization of Arabidopsis developmentally regulated G-proteins (DRGs)

Developmentally regulated G-proteins (DRGs) are a highly conserved family of GTP-binding proteins found in archaea, plants, fungi and animals, indicating important roles in fundamental pathways. Their function is poorly understood, but they have been implicated in cell division, proliferation, and growth, as well as several medical conditions. Individual subfamilies within the G-protein superfamily possess unique nucleotide binding and hydrolysis rates that are intrinsic to their cellular function, and so characterization of these rates for a particular G-protein may provide insight into its cellular activity. We have produced recombinant active DRG protein using a bacterial expression system and refolding, and performed biochemical characterization of their GTP binding and hydrolysis. We show that recombinant Arabidopsis thaliana atDRG1 and atDRG2a are able to bind GDP and GTP. We also show that DRGs can hydrolyze GTP in vitro without the assistance of GTPase-activating proteins and guanine exchange factors. The atDRG proteins hydrolyze GTP at a relatively slow rate (0.94x10(-3)min(-1) for DRG1 and 1.36x10(-3)min(-1) for DRG2) that is consistent with their nearest characterized relatives, the Obg subfamily. The ability of DRGs to bind nucleotide substrates without assistance, their slow rate of GTP hydrolysis, heat stress activation and domain conservation suggest a possible role as a chaperone in ribosome assembly in response to stress as it has been suggested for the Obg proteins, a different but related G-protein subfamily.

Different effects of L-arginine on protein refolding: suppressing aggregates of hydrophobic interaction, not covalent binding

Arginine is one of the most favorable additives in protein refolding. However, arginine does not work for certain disulfide-bond-containing proteins, which is not yet well explained. In this work, refolding of three proteins in the presence of 0-2 M arginine was investigated and compared. Bovine carbonic anhydrase B (CAB), containing no cysteine, was successfully refolded with the help of arginine. The refolding yield could reach almost 100% in the presence of 0.75 M arginine. However, recombinant human colony stimulating factor (rhG-CSF), containing five cysteines, could only achieve 65% refolding yield. The formation of aggregates was found. Blocking of free SH groups of the denatured rhG-CSF by iodoacetamide and subsequently refolding of the protein could reduce the aggregate formation substantially. Further investigation on recombinant green fluorescence protein (GFP), containing two cysteines, also revealed the accumulation of oligomers. The content of oligomers increased with the concentration of arginine, reaching about 30% at 2 M arginine. Comparison of reduced and nonreduced SDS-PAGE revealed that the oligomers were formed through intermolecular disulfide binding. Analysis of the refolding kinetics indicated that intermolecular disulfide bonds were probably formed in the intermediate stage where arginine slowed down the refolding rate and stabilized the intermediates. The accumulated intermediates with unpaired cysteine possessed more chances to react with each other to form oligomers, whereas arginine failed to inhibit disulfide bond formation.

Phospholipid-interacting proteins by solution-state NMR spectroscopy

Signaling lipids are found in specific subcellular membranes, where they recruit and regulate cytosolic proteins and contribute to bilayer structure and dynamics. These interactions are vital for signaling and membrane trafficking pathways and contribute to the organization, growth, and differentiation of the cell. However, the analysis of the physical and chemical mechanisms of membrane interaction and lipid recognition is technically challenging, motivating the development of new NMR methods to study lipid and bilayer binding by peripheral membrane proteins in solution. We describe methods that have been optimized for the FYVE and phox (PX) domains of the EEA1 and Vam7p proteins, respectively, both of which specifically recognize phosphatidylinositol 3-phosphate (PtdIns3P) within endocytic membranes. Solution-state NMR methods were used to characterize the phosphoinositide and membrane interaction sites and affinities and can be used to illustrate protein:micelle structures and phospholipid specificities. The methods are generally applicable and can be used to discover and characterize the phospholipid interactions of other membrane-interacting protein domains.

Refolding solubilized inclusion body proteins

The vast majority of protein purification is now done with cloned, recombinant proteins expressed in a suitable host. The predominant host is Escherichia coli. Many, if not most, expressed proteins are found in an insoluble form called an inclusion body (IB). Since the target protein is often relatively pure in a washed IB, the challenge is not so much to purify the target, but rather to solubilize an IB and refold the protein into its native structure, regaining full biological activity. While many of the operations of this process are quite general (expression, cell disruption, IB isolation and washing, and IB solubilization), the precise conditions that give efficient refolding differ for each protein. This chapter describes the main techniques and strategies for achieving successful refolding.

Refolding and simultaneous purification by three-phase partitioning of recombinant proteins from inclusion bodies

Many recombinant eukaryotic proteins tend to form insoluble aggregates called inclusion bodies, especially when expressed in Escherichia coli. We report the first application of the technique of three-phase partitioning (TPP) to obtain correctly refolded active proteins from solubilized inclusion bodies. TPP was used for refolding 12 different proteins overexpressed in E. coli. In each case, the protein refolded by TPP gave either higher refolding yield than the earlier reported method or succeeded where earlier efforts have failed. TPP-refolded proteins were characterized and compared to conventionally purified proteins in terms of their spectral characteristics and/or biological activity. The methodology is scaleable and parallelizable and does not require subsequent concentration steps. This approach may serve as a useful complement to existing refolding strategies of diverse proteins from inclusion bodies.

Overview of the purification of recombinant proteins produced in Escherichia coli

The updated version of this unit presents an overview of recombinant protein purification with special emphasis on proteins expressed in E. coli. The first section deals with information pertinent to protein purification that can be derived from translation of the cDNA sequence. This is followed by a discussion of common problems associated with bacterial protein expression. A flow chart summarizes approaches for establishing solubility and localization of bacterially produced proteins. Purification strategies for both soluble and insoluble proteins are also reviewed. A section on glycoproteins produced in bacteria in the nonglycosylated state is included to emphasize that, although they may not be useful for in vivo studies, such proteins are well suited for structural studies. Finally, protein handling, scale and aims of purification, and specialized equipment needed for recombinant protein purification and characterization are discussed. The methodologies and approaches described here are essentially suitable for laboratory-scale operations.

Inhibition of protein aggregation: supramolecular assemblies of arginine hold the key

BACKGROUND

Aggregation of unfolded proteins occurs mainly through the exposed hydrophobic surfaces. Any mechanism of inhibition of this aggregation should explain the prevention of these hydrophobic interactions. Though arginine is prevalently used as an aggregation suppressor, its mechanism of action is not clearly understood. We propose a mechanism based on the hydrophobic interactions of arginine.

METHODOLOGY

We have analyzed arginine solution for its hydrotropic effect by pyrene solubility and the presence of hydrophobic environment by 1-anilino-8-naphthalene sulfonic acid fluorescence. Mass spectroscopic analyses show that arginine forms molecular clusters in the gas phase and the cluster composition is dependent on the solution conditions. Light scattering studies indicate that arginine exists as clusters in solution. In the presence of arginine, the reverse phase chromatographic elution profile of Alzheimer's amyloid beta 1-42 (Abeta(1-42)) peptide is modified. Changes in the hydrodynamic volume of Abeta(1-42) in the presence of arginine measured by size exclusion chromatography show that arginine binds to Abeta(1-42). Arginine increases the solubility of Abeta(1-42) peptide in aqueous medium. It decreases the aggregation of Abeta(1-42) as observed by atomic force microscopy.

CONCLUSIONS

Based on our experimental results we propose that molecular clusters of arginine in aqueous solutions display a hydrophobic surface by the alignment of its three methylene groups. The hydrophobic surfaces present on the proteins interact with the hydrophobic surface presented by the arginine clusters. The masking of hydrophobic surface inhibits protein-protein aggregation. This mechanism is also responsible for the hydrotropic effect of arginine on various compounds. It is also explained why other amino acids fail to inhibit the protein aggregation.

Confronting high-throughput protein refolding using high pressure and solution screens

Over-expression of heterologous proteins in Escherichia coli is commonly hindered by the formation of inclusion bodies. Nevertheless, refolding of proteins in vitro has become an essential requirement in the development of structural genomics (proteomics) and as a means of recovering functional proteins from inclusion bodies. Many distinct methods for protein refolding are now in use. However, regardless of method used, developing a reliable protein refolding protocol still requires significant optimization through trial and error. Many proteins fall into the category of "Challenging" or "Difficult to Express" and are problematic to refold using traditional chaotrope-based refolding techniques. This review discusses new methods for improving protein refolding, such as implementing high hydrostatic pressure, using small molecule additives to enhance traditional protein refolding strategies, as well as developing practical methods for performing refolding studies to maximize their reliability and utility. The strategies examined here focus on high-throughput, automated refolding screens, which can be applied to structural genomic projects.

Use of recombinant Entamoeba histolytica cysteine proteinase 1 to identify a potent inhibitor of amebic invasion in a human colonic model

Cysteine proteinases are key virulence factors of the protozoan parasite Entamoeba histolytica. We have shown that cysteine proteinases play a central role in tissue invasion and disruption of host defenses by digesting components of the extracellular matrix, immunoglobulins, complement, and cytokines. Analysis of the E. histolytica genome project has revealed more than 40 genes encoding cysteine proteinases. We have focused on E. histolytica cysteine proteinase 1 (EhCP1) because it is one of two cysteine proteinases unique to invasive E. histolytica and is highly expressed and released. Recombinant EhCP1 was expressed in Escherichia coli and refolded to an active enzyme with a pH optimum of 6.0. We used positional-scanning synthetic tetrapeptide combinatorial libraries to map the specificity of the P1 to P4 subsites of the active site cleft. Arginine was strongly preferred at P2, an unusual specificity among clan CA proteinases. A new vinyl sulfone inhibitor, WRR483, was synthesized based on this specificity to target EhCP1. Recombinant EhCP1 cleaved key components of the host immune system, C3, immunoglobulin G, and pro-interleukin-18, in a time- and dose-dependent manner. EhCP1 localized to large cytoplasmic vesicles, distinct from the sites of other proteinases. To gain insight into the role of secreted cysteine proteinases in amebic invasion, we tested the effect of the vinyl sulfone cysteine proteinase inhibitors K11777 and WRR483 on invasion of human colonic xenografts. The resultant dramatic inhibition of invasion by both inhibitors in this human colonic model of amebiasis strongly suggests a significant role of secreted amebic proteinases, such as EhCP1, in the pathogenesis of amebiasis.

Purification and in vitro refolding of maize chloroplast transglutaminase over-expressed in Escherichia coli

In contrast to mammalian transglutaminases (TGs), plant members of the superfamily are poorly characterized. In order to produce pure and active TG for its functional and structural studies, variants of maize chloroplast transglutaminase (TGZ, Patent WWO03102128) were sub-cloned into a pET28 vector and overexpressed in Escherichia coli BL21 (DE3) cells. The recombinant proteins were present mainly as insoluble inclusion bodies. The TGZ4p variant with four B-type repeats (M(r) approximately 55 kDa), was affinity purified from urea-solubilized inclusion bodies. TGZ4p was refolded by rapid dilution in a Ca(2+)- and guanidine-containing buffer. Active TGZ4p shows the general catalytic characteristics described for other TGs.

Biotechnology applications of amino acids in protein purification and formulations

Amino acids are widely used in biotechnology applications. Since amino acids are natural compounds, they can be safely used in pharmaceutical applications, e.g., as a solvent additive for protein purification and as an excipient for protein formulations. At high concentrations, certain amino acids are found to raise intra-cellular osmotic pressure and adjust to the high salt concentrations of the surrounding medium. They are called "compatible solutes", since they do not affect macromolecular function. Not only are they needed to increase the osmotic pressure, they are known to increase the stability of the proteins. Sucrose, glycerol and certain amino acids were used to enhance the stability of unstable proteins after isolation from natural environments. The mechanism of the action of these protein-stabilizing amino acids is relatively well understood. On the contrary, arginine was accidentally discovered as a useful reagent for assisting in the refolding of recombinant proteins. This effect of arginine was ascribed to its ability to suppress aggregation of the proteins during refolding, thereby increasing refolding efficiency. By the same mechanism, arginine now finds much wider applications than previously anticipated in the research and development of proteins, in particular in pharmaceutical applications. For example, arginine solubilizes proteins from loose inclusion bodies, resulting in efficient production of active proteins. Arginine suppresses protein-protein interactions in solution and also non-specific adsorption to gel permeation chromatography columns. Arginine facilitates elution of bound proteins from various column resins, including Protein-A or dye affinity columns and hydrophobic interaction columns. This review covers various biotechnology applications of amino acids, in particular arginine.

Refolding of a membrane protein in a microfluidics reactor

Membrane protein production for structural studies is often hindered by the formation of non-specific aggregates from which the protein has to be denatured and then refolded to a functional state. We developed a new approach, which uses microfluidics channels, to refold protein correctly in quantities sufficient for structural studies. Green fluorescent protein (GFP), a soluble protein, and bacteriorhodopsin (BR), a transmembrane protein, were used to demonstrate the efficiency of the process. Urea-denatured GFP refolded as the urea diffused away from the protein, forming in the channel a uniform fluorescent band when observed by confocal microscopy. Sodium dodecyl sulphate-denatured BR refolded within the channel on mixing with detergent-lipid mixed micelles. The refolding, monitored by absorbance spectroscopy, was found to be flow rate dependent. This potential of microfluidic reactors for screening protein-folding conditions and producing protein would be particularly amenable for high-throughput applications required in structural genomics.

Protein solubility: sequence based prediction and experimental verification

MOTIVATION

Obtaining soluble proteins in sufficient concentrations is a recurring limiting factor in various experimental studies. Solubility is an individual trait of proteins which, under a given set of experimental conditions, is determined by their amino acid sequence. Accurate theoretical prediction of solubility from sequence is instrumental for setting priorities on targets in large-scale proteomics projects.

RESULTS

We present a machine-learning approach called PROSO to assess the chance of a protein to be soluble upon heterologous expression in Escherichia coli based on its amino acid composition. The classification algorithm is organized as a two-layered structure in which the output of primary support vector machine (SVM) classifiers serves as input for a secondary Naive Bayes classifier. Experimental progress information from the TargetDB database as well as previously published datasets were used as the source of training data. In comparison with previously published methods our classification algorithm possesses improved discriminatory capacity characterized by the Matthews Correlation Coefficient (MCC) of 0.434 between predicted and known solubility states and the overall prediction accuracy of 72% (75 and 68% for positive and negative class, respectively). We also provide experimental verification of our predictions using solubility measurements for 31 mutational variants of two different proteins.

High-throughput identification of refolding conditions for LXRβ without a functional assay

The expression of human genes in bacteria is often one of the most efficient systems for generating proteins for drug discovery efforts. However, expression of mammalian cDNAs in Escherichia coli often results in the production of protein that is insoluble and misfolded and thus requires the development of a successful refolding procedure to generate active protein. To accelerate the process of developing protein refolding protocols, we have developed a semi-automated screening and assay system that utilizes an incomplete factorial approach to sample a large "space" of refolding conditions based on parameters known to influence protein stability and solubility. Testing of these conditions is performed readily in a 96-well plate format with minimal sample manipulation. The folded protein is resolved and detected using an HPLC equipped with a mini-column and a highly sensitive fluorescence detector. This simple method requires only a small amount of protein for the entire screen (<1 mg), and most importantly, a functional assay is not required to assess the refolding yields. Here, we validate the utility of this screening system using two model proteins, IL13 and MMP13, and demonstrate its successful application to the refolding of our target protein, the ligand-binding domain of rat liver X receptor beta.

Rapid determination of protein solubility and stability conditions for NMR studies using incomplete factorial design

Sample preparation constitutes a crucial and limiting step in structural studies of proteins by NMR. The determination of the solubility and stability (SAS) conditions of biomolecules at millimolar concentrations stays today empirical and hence time- and material-consuming. Only few studies have been recently done in this field and they have highlighted the interest of using crystallogenesis tools to optimise sample conditions. In this study, we have adapted a method based on incomplete factorial design and making use of crystallisation plates to quantify the influence of physico-chemical parameters such as buffer pH and salts on protein SAS. A description of the experimental set up and an evaluation of the method are given by case studies on two functional domains from the bacterial regulatory protein LicT as well as two other proteins. Using this method, we could rapidly determine optimised conditions for extracting soluble proteins from bacterial cells and for preparing purified protein samples sufficiently concentrated and stable for NMR characterisation. The drastic reduction in the time and number of experiments required for searching protein SAS conditions makes this method particularly well-adapted for a systematic investigation on a large range of physico-chemical parameters.

An automatable screen for the rapid identification of proteins amenable to refolding

Insoluble expression of heterologous proteins in Escherichia coli is a major bottleneck of many structural genomics and high-throughput protein biochemistry projects. Many of these proteins may be amenable to refolding, but their identification is hampered by a lack of high-throughput methods. We have developed a matrix-assisted refolding approach in which correctly folded proteins are distinguished from misfolded proteins by their elution from affinity resin under non-denaturing conditions. Misfolded proteins remain adhered to the resin, presumably via hydrophobic interactions. The assay can be applied to insoluble proteins on an individual basis but is particularly well suited for high-throughput applications because it is rapid, automatable and has no rigorous sample preparation requirements. The efficacy of the screen is demonstrated on small-scale expression samples for 15 proteins. Refolding is then validated by large-scale expressions using SEC and circular dichroism.

Chlamydomonas reinhardtii encodes a single sigma70-like factor which likely functions in chloroplast transcription

Chlamydomonas reinhardtii EST clones encoding a protein highly similar to prokaryotic sigma factors and plant sigma-like factors (SLFs) were used to isolate a BAC clone containing the full-length gene CrRpoD. The gene is likely to be single-copy, in contrast to small gene families encoding SLFs in plants. The CrRpoD mRNA comprises 3,033 nt with an open reading frame of 2,256 nt, encoding a putative protein of 752 amino acids with a molecular mass of 80.2 kDa. The sequence contains conserved regions 2-4 typically found in sigma factors, and an unusually long amino terminal extension, which by in silico analysis has properties of a chloroplast transit peptide. Expression of CrRpoD was confirmed by immunodetection of a 85 kDa polypeptide in a preparation enriched for chloroplast proteins. To demonstrate functionality in transcription initiation, a recombinant CrRpoD-thioredoxin fusion protein was reconstituted with E. coli RNA polymerase core enzyme and tested in vitro. This chimeric holoenzyme specifically bound the spinach psbA and Chlamydomonas rrn16 promoters in gel mobility shift assays and exhibited specific transcription initiation from the same two promoters, providing evidence for the role of CrRpoD as a functional transcription factor.

Effects of solutes on solubilization and refolding of proteins from inclusion bodies with high hydrostatic pressure

High hydrostatic pressure (HHP)-mediated solubilization and refolding of five inclusion bodies (IBs) produced from bacteria, three gram-negative binding proteins (GNBP1, GNBP2, and GNBP3) from Drosophila, and two phosphatases from human were investigated in combination of a redox-shuffling agent (2 mM DTT and 6 mM GSSG) and various additives. HHP (200 MPa) combined with the redox-shuffling agent resulted in solubilization yields of approximately 42%-58% from 1 mg/mL of IBs. Addition of urea (1 and 2 M), 2.5 M glycerol, L-arginine (0.5 M), Tween 20 (0.1 mM), or Triton X-100 (0.5 mM) significantly enhanced the solubilization yield for all proteins. However, urea, glycerol, and nonionic surfactants populated more soluble oligomeric species than monomeric species, whereas arginine dominantly induced functional monomeric species (approximately 70%-100%) to achieve refolding yields of approximately 55%-78% from IBs (1 mg/mL). Our results suggest that the combination of HHP with arginine is most effective in enhancing the refolding yield by preventing aggregation of partially folded intermediates populated during the refolding. Using the refolded proteins, the binding specificity of GNBP2 and GNBP3 was newly identified the same as with that of GNBP1, and the enzymatic activities of the two phosphatases facilitates their further characterization.

Refolding strategies for ketosteroid isomerase following insoluble expression inEscherichia coli

Dilution and column-based protein refolding techniques are compared for refolding Delta 5-3-ketosteroid isomerase (KSI) with a C-terminus his6-tag. Column refolding was performed by removing the denaturant while the protein was adsorbed in an immobilized metal affinity chromatography column. Both dilution refolding and a single-step column-based refolding strategy were optimized to maximize the recovery of KSI enzyme activity, and achieved refolding yields of 87% and 70% respectively. It was found that the column-based refolding yield was reduced at higher adsorbed protein concentrations. An elution gradient with increasing imidazole concentration was used to selectively elute the biologically active KSI protein following column refolding, with high molecular weight KSI aggregates retained in the column. An iterative column-refolding process was then developed to denature and refold protein retained in the column, which significantly increased the refolding yield at high-adsorbed protein concentrations. Repetition of the column refolding operation increased the refolding yield from 50% to 75% for protein adsorbed at a concentration of 2.9 mg/mL of adsorbent. Although for the KSI protein column-based refolding did not improve the overall refolding yield compared to dilution refolding, it may still be advantageous due to the ease of integration with purification operations, increased control over the refolding conditions, and the ability to segregate refolded protein from inactive aggregates during elution.

Recent Advances in GFP Folding Reporter and Split-GFP Solubility Reporter Technologies. Application to Improving the Folding and Solubility of Recalcitrant Proteins from Mycobacterium tuberculosis

We have improved our green fluorescent protein (GFP) folding reporter technology [Waldo et al., (1999) Nat. Biotechnol. 17, 691-695] to evolve recalcitrant proteins from Mycobacterium tuberculosis. The target protein is inserted into the scaffolding of the GFP, eliminating false-positive artifacts caused by expression of truncated protein variants from internal cryptic ribosome binding sites in the target RNA. In parallel, we have developed a new quantitative fluorescent protein tagging and detection system based on micro-domains of GFP. This split-GFP system, which works both in vivo and in vitro, is amenable to high-throughput assays of protein expression and solubility [Cabantous et al., (2005) Nat. Biotechnol. 23, 102-107]. Together, the GFP folding reporter and split-GFP technologies offer a comprehensive system for manipulating and improving protein folding and solubility.

Recombinant Bacterial Expression of the Lysozyme from the Tobacco-Hornworm Manduca sexta with Activity at Low Temperatures

A gene coding for lysozyme from the insect Manduca sexta (Ms-lyz) was expressed in Escherichia coli. The protein was produced as an insoluble cytoplasmic inclusion body which was denatured in 8 M: guanidine-HCl, renatured and purified by affinity and ion-exchange chromatography. The N-terminal sequence and the activity of the recombinant protein against Micrococcus luteus confirmed that correct expression had occurred. When Ms-lyz activity was compared to hen egg white lysozyme, the insect lysozyme was active at lower temperatures. These results demonstrate the feasibility of producing a disulfide-bonded lysozyme enzyme in bacteria and suggest that the insect Ms-lyz is an interesting system for further development of an antibacterial functional at low temperatures.

Purification, folding, and characterization of Rec12 (Spo11) meiotic recombinase of fission yeast

Meiotic recombination is initiated by controlled dsDNA breaks (DSBs). Rec12 (Spo11) protein of fission yeast is essential for the formation of meiotic DSBs in vivo, for meiotic recombination, and for segregation of chromosomes during meiosis I. Rec12 is orthologous to Top6A topoisomerase of Archaea and is likely the catalytic subunit of a meiotic recombinase that introduces recombinogenic DSBs. However, despite intensive effort, it has not been possible to produce Rec12 protein in a soluble form required to permit biochemical analyses of function. To obtain purified Rec12 protein for in vitro studies, a rec12(+) cDNA was generated, cloned into vector pET15b(+), and expressed in Escherichia coli. Rec12 protein was produced at moderate levels and it partitioned into insoluble fractions of whole-cell extracts. The protein was enriched based upon its differential solubility in two different denaturants and was further purified by column chromatography. A combinatorial, fractional, factorial approach was used to identify conditions under which Rec12 protein could be refolded. Four parameters were most important and, following optimization, soluble Rec12 protein was obtained. Gel filtration demonstrated that refolded Rec12 protein exists as a monomer in solution, suggesting that additional proteins may be required to assemble biologically-active Rec12 dimers, as inferred previously from genetic data [Cell Chromosome 1 (2002) 1]. The production of refolded Rec12 in a soluble form will allow for characterization in vitro of this key meiotic recombination enzyme.