The 2018 California Wildfires: Integration of Rapid DNA to Dramatically Accelerate Victim Identification

The impact of climate change and sustainability initiatives on forensic practice

The climate change crisis affects all aspects of our lives, and this includes national and global scientific endeavours. The forensic sciences are no different but are yet to engage meaningfully with this agenda or to consider what it means for future practice. This paper explores and discusses a range of impacts on forensic and crime scene practice derived from climate change and proposes the potential implications. The paper concludes by laying out a way forward and a programme of activity to support the forensic sciences to manage the implications of climate change and related sustainability initiatives on the criminal and medico-legal investigative community.

Pilot validation of on-field STR typing and human identity testing by MinION nanopore sequencing

Nanopore sequencing technology has broad application prospects in forensic medicine due to its small size, portability, fast speed, real-time result analysis capabilities, single-molecule sequencing abilities, and simple operation. Here, we demonstrate for the first time that nanopore sequencing platforms can be used to identify individuals in the field. Through scientific and reasonable design, a nanopore MinION MK1B device and other auxiliary devices are integrated into a portable detection box conducive to individual identification at the accident site. Individual identification of 12 samples could be completed within approximately 24 h by jointly detecting 23 short tandem repeat (STR) loci. Through double-blinded experiments, the genotypes of 49 samples were successfully determined, and the accuracy of the STR genotyping was verified by the gold standard. Specifically, the typing success rate for 1150 genotypes was 95.3%, and the accuracy rate was 86.87%. Although this study focused primarily on demonstrating the feasibility of full-process testing, it can be optimistically predicted that further improvements in bioinformatics workflows and nanopore sequencing technology will help enhance the feasibility of Oxford Nanopore Technologies equipment for real-time individual identification at accident sites.

Processing biological samples from simulated radiological terrorist events using Rapid DNA instruments

Two commercially available portable Rapid DNA instruments were evaluated for their ability to process 1 µL and 10 µL saliva samples deposited on metal and plastic surfaces and contaminated with surrogates of cesium (Cs)-137, strontium (Sr)-90 and cobalt (Co)-60; radioactive materials potentially released during a nuclear weapon accident or a radiological dispersal device detonation. A comparable success rate was noted for both Rapid DNA instruments when considering the number of complete and balanced DNA profiles, the number of profiles with a minimum of 10 autosomal STR loci (out of 23 [FlexPlex™ 27] or 21 [GlobalFiler™ Express]), and the possibility to search a national DNA database in Canada and the United States. Cobalt had an adverse impact on the quality of the megaplex short tandem repeat (STR) DNA profiles derived on each instrument for two of the three contamination levels tested in this study, i.e., 0.05 M and 0.1 M as reflected by a reduced number of detected alleles and decreased profile peak heights. Strontium exhibited some adverse effect on the Rapid DNA results when used at the highest contamination level (0.1 M) whereas cesium had none. No new artifacts were observed in the Rapid DNA profiles of samples spiked with the non-radiogenic surrogates. Importantly, in the context of a radiological/nuclear (RN) event, the ANDE™ 6C offers the possibility to dispose of all radioactive materials associated with contaminated samples quickly using a chip on which all steps of the Rapid DNA process are performed whereas the RapidHIT™ ID accumulates radioactive materials for many days before disposal. An individual handling 25 samples in a week (5 per day) on the RapidHIT™ ID at a 30.5 cm distance with a 5 min exposure to the radioactive source estimated at every run would exceed the 0.042 µSv/5 min limit with gamma dose rates for Cs at 0.13 mSv and for Co at 3.8 mSv. Beta dose rates calculated for the surrogate isotopes at the three concentrations tested were also above the recommended radiation exposure limit of 1 mSv/yr (0.042 µSv/5 min). Various potential mechanisms of action behind the interference noted for Sr and Co at high concentrations are presented. These elements may play a role in the steps prior to PCR (at the DNA molecule by binding to bases or to phosphate groups), during PCR (at the DNA polymerase as cofactors for catalytic sites), or even during amplified DNA fragment detection (as fluorescence quenchers).

Comparative analysis of two Rapid DNA technologies for the processing of blood and saliva-based samples

Rapid DNA technologies recently gained significant momentum as a means to generate DNA profiles faster than with standard laboratory workflows. Initially developed for the analysis of buccal reference samples, applications are being considered for other types of forensic samples. In this study, an identical set of 150 blood and saliva-based samples was processed using two different Rapid DNA technologies, the Applied BioSystems™ RapidHIT™ ID System using the RapidINTEL™ sample cartridge and the ANDE™ 6C Rapid DNA Analysis™ System using the I-Chip. A subset of samples were subjected to alternative collection methods or sample pre-treatments to determine the optimal strategy for each instrument. An equivalent sample set was also processed using a conventional DNA analysis workflow. The sensitivity range of the two Rapid DNA technologies was comparable based on blood and saliva dilution series, with both technologies able to generate full profiles from samples typically yielding 5-10 ng of DNA when processed using conventional DNA analysis. The brand of cotton swabs used for Rapid DNA analysis had an impact on the results for both systems. Differences were observed in success rate between the two systems when processing blood (on fabrics, FTA paper or hard surfaces) and saliva-based samples (drink containers, FTA paper, chewing gum, cigarette butt filter paper) and depended on the sample type. Importantly, deviating from the manufacturer's instructions for sample collection and pre-treatment was more detrimental to the ANDE 6C results. The quality of DNA profiles, as assessed using heterozygote peak height ratios, interloci balance and artifact presence, confirmed the results to be reliable and acceptable for single source samples. Profiling results were obtained when samples were reprocessed using the same Rapid DNA technology or conventional DNA analysis. Secondary analysis using a substitute software (GeneMapper ID-X v1.5) to recover additional genetic information was shown to be feasible. Finally, a comparison between the Applied Biosystems™ RapidHIT™ ID System Software v1.3.1 and v1.3.2 was also performed. Findings of this study could assist those interested in using Rapid DNA technology for blood or saliva-based samples, in various settings and for different applications.

Alternative workflows for identifying transnational missing persons

Mass migration and migrant death at the U.S. southern border highlight the disconnectedness of the systems for transnational decedent identifications. Death investigation cases in Texas face delays and barriers at all stages of an investigation. Additionally, fragmentation of DNA databases exacerbate challenges in comparing genetic samples from unidentified human remains (UHR) and families of the missing. We sought to pilot alternative workflows for processing UHR and family reference samples (FRS) for the identification of probable migrant decedents. Primarily using Rapid DNA, but also accredited non-CODIS DNA laboratories, the piloted approaches were conducted in parallel to existing medicolegal workflows under the relevant case jurisdictional guidance. Our data show that Rapid DNA is a valid path for anthropology laboratories to support identification hypotheses and that accredited non-CODIS forensic and genetic laboratories also can support families to identify remains, especially when families reside outside of the United States.

Rapid and Sensitive Human-Specific DNA Quantitation Using a Microfluidic Amplification Module at the Point-of-Care

A rapid microfluidic human-specific DNA quantitation assay module was developed for chip-based amplification of the human TH01 and Alu loci in the presence of PicoGreen. The method makes use of the thermal cycler and 488 nm Solid State laser-based optical train that are components of the fully-integrated, sample-in to results out, ANDE Rapid Nucleic Acid Analysis system. The assay was effective in quantitating human DNA from a variety of sample types, including blood, buccal, and forensic touch samples mixed with varying amounts of non-human DNA. The 28-cycle TH01 and 10-cycle Alu reactions were completed in 18 minutes and 7 minutes, respectively. The observed limit of detection (LOD) of the assay is approximately 0.3 ng, and the flexibility of assay design allows an LOD of as little as 0.005 femtograms.Clinical Relevance-We have developed a fully-integrated, sample-in to results-out, Rapid Nucleic Acid Analysis system that characterizes nucleic acid fragments (whether generated by PCR, rt-PCR, sequencing, or SNP reactions) by electrophoresis in plastic microfluidic channels. Here we describe the development, characterization, and validation of the microfluidic quantitation module. The quantitation module is the first that can be incorporated into integrated microfluidic workflows for the analysis of highly-multiplexed clinical diagnostic assays interrogating hundreds of genomic targets in a single sample. In particular, the use of a microfluidic quantitation module allows reaction volumes, thermal cycling conditions, and electrophoretic injection protocols to be determined based on nucleic acid content during and throughout fully-automated processing-dramatically enhancing the power of the fully-automated diagnostic system.

Introducing a Rapid DNA Analysis Procedure for Crime Scene Samples Outside of the Laboratory-A Field Experiment

Technological innovations enable rapid DNA analysis implementation possibilities. Concordantly, rapid DNA devices are being used in practice. However, the effects of implementing rapid DNA technologies in the crime scene investigation procedure have only been evaluated to a limited extent. In this study a field experiment was set up comparing 47 real crime scene cases following a rapid DNA analysis procedure outside of the laboratory (decentral), with 50 cases following the regular DNA analysis procedure at the forensic laboratory. The impact on duration of the investigative process, and on the quality of the analyzed trace results (97 blood and 38 saliva traces) was measured. The results of the study show that the duration of the investigation process has been significantly reduced in cases where the decentral rapid DNA procedure was deployed, compared to cases where the regular procedure was used. Most of the delay in the regular process lies in the procedural steps during the police investigation, not in the DNA analysis, which highlights the importance of an effective work process and having sufficient capacity available. This study also shows that rapid DNA techniques are less sensitive than regular DNA analysis equipment. The device used in this study was only to a limited extent suitable for the analysis of saliva traces secured at the crime scene and can mainly be used for the analysis of visible blood traces with an expected high DNA quantity of a single donor.

Comparative study of Rapid DNA versus conventional methods on compromised bones

Equivalent amounts of compromised bones were used to directly compare STR success of conventional and Rapid DNA methods. Conventional DNA extraction methods, including manual full demineralization and semi-automated PrepFiler BTA/ AutoMate Express (ThermoFisher Scientific), provided insights regarding the DNA quantity and extent of degradation of each compromised bone analyzed with ANDE 6C (ANDE Corp) and RapidHIT ID (ThermoFisher Scientific) Rapid systems. Full demineralization provided higher DNA yields than extraction with the AutoMate Express for quality control (QC) and environmentally challenged bones. The degradation indices ranged from ∼1.8 to 73. Both demineralization and AutoMate Express extracts benefited from additional clean-up with NucleoSpin XS devices, which usually resulted in more alleles being detected than without further clean-up. Complete "CODIS 20″ profiles could be obtained with bone QC1 with all methods. However, among the 14 compromised bones with low DNA content, complete CODIS 20 profiles were detected for 7, 4, and 0 bones analyzed with demineralization, AutoMate Express and ANDE methods, respectively. The RapidHIT ID was the least sensitive method, providing the fewest detectable alleles for the bones tested. Whereas extracted DNA of approximately 0.1 ng can yield complete GlobalFiler STR profiles, at least 30 ng was required for complete FlexPlex 27 profiles using the ANDE 6C Rapid DNA system. In addition to being less sensitive than conventional methods, the tested Rapid DNA approaches were less predictable when attempting to improve STR success and proved to be less reliable in genotyping accuracy.

Taking the microfluidic approach to nucleic acid analysis in forensics: Review and perspectives

Forensic laboratories are universally acknowledged as being overburdened, underfunded, and in need of improved analytical methods to expedite investigations, decrease the costs associated with nucleic acid (NA) analysis, and perform human identification (HID) at the point of need (e.g., crime scene, booking station, etc.). In response, numerous research and development (R&D) efforts have resulted in microfluidic tools that automate portions of the forensic genetic workflow, including DNA extraction, amplification, and short tandem repeat (STR) typing. By the early 2000 s, reports from the National Institute of Justice (NIJ) anticipated that microfluidic 'swab-in-profile-out' systems would be available for use at the crime scene by 2015 and the FBI's 2010 'Rapid DNA' Initiative, approved by Congress in 2017, directed this effort by guiding the development and implementation of maturing systems. At present, few fully-automated microfluidic DNA technologies are commercially available for forensic HID and their adoption by agencies interested in identification has been limited. In practice, the integration of complex laboratory processes to produce one autonomous unit, along with the highly variable nature of forensic input samples, resulted in systems that are more expensive per sample and not comparable to gold-standard identification methods in terms of sensitivity, reproducibility, and multiplex capability. This Review and Perspective provides insight into the contributing factors to this outcome; namely, we focus on the complications associated with the tremendous undertaking that is developing a sample-in-answer-out platform for HID. For context, we also describe the intricate forensic landscape that contributes to a nuanced marketplace, not easily distilled down to cases of simple supply and demand. Moving forward and considering the trade-offs associated with developing methods to compete, sometimes directly, with conventional ones, we recommend a focus shift for microfluidics developers toward the creation of innovative solutions for emerging applications in the field to increase the bandwidth of the forensic investigative toolkit. Likewise, we urge case working personnel to reframe how they conceptualize the currently available Rapid DNA tools; rather than comparing these microfluidic methods to gold-standard procedures, take advantage of their rapid and integrated modes for those situations requiring expedited identifications in an informed manner.

A Systematic Review on Commercially Available Integrated Systems for Forensic DNA Analysis

This systematic review describes and discusses three commercially available integrated systems for forensic DNA analysis, i.e., ParaDNA, RapidHIT, and ANDE. A variety of aspects, such as performance, time-to-result, ease-of-use, portability, and costs (per analysis run) of these three (modified) rapid DNA analysis systems, are considered. Despite their advantages and developmental progress, major steps still have to be made before rapid systems can be broadly applied at crime scenes for full DNA profiling. Aspects in particular that need (further) improvement are portability, performance, the possibility to analyze a (wider) variety of (complex) forensic samples, and (cartridge) costs. Moreover, steps forward regarding ease-of-use and time-to-result will benefit the broader use of commercial rapid DNA systems. In fact, it would be a profit if rapid DNA systems could be used for full DNA profile generation as well as indicative analyses that can give direction to forensic investigators which will speed up investigations.

Recent advances in forensic biology and forensic DNA typing: INTERPOL review 2019-2022

This review paper covers the forensic-relevant literature in biological sciences from 2019 to 2022 as a part of the 20th INTERPOL International Forensic Science Managers Symposium. Topics reviewed include rapid DNA testing, using law enforcement DNA databases plus investigative genetic genealogy DNA databases along with privacy/ethical issues, forensic biology and body fluid identification, DNA extraction and typing methods, mixture interpretation involving probabilistic genotyping software (PGS), DNA transfer and activity-level evaluations, next-generation sequencing (NGS), DNA phenotyping, lineage markers (Y-chromosome, mitochondrial DNA, X-chromosome), new markers and approaches (microhaplotypes, proteomics, and microbial DNA), kinship analysis and human identification with disaster victim identification (DVI), and non-human DNA testing including wildlife forensics. Available books and review articles are summarized as well as 70 guidance documents to assist in quality control that were published in the past three years by various groups within the United States and around the world.

Development of individual identification method using thoracic vertebral features as biometric fingerprints

Identification of individuals is performed when a corpse is found after a natural disaster, incident, or accident. DNA and dental records are frequently used as biometric fingerprints; however, identification may be difficult in some cases due to decomposition or damage to the corpse. The present study aimed to develop an individual identification method using thoracic vertebral features as a biological fingerprint. In this method, the shortest diameter in height, width, and depth of the thoracic vertebrae in the postmortem image and a control antemortem were recorded and a database was compiled using this information. The Euclidean distance or the modified Hausdorff distance was calculated as the distance between two points on the three-dimensional feature space of these measurement data. The thoracic vertebrae T1-12 were measured and the pair with the smallest distance was considered to be from the same person. The accuracy of this method for identifying individuals was evaluated by matching images of 82 cases from a total of 702 antemortem images and showed a hit ratio of 100%. Therefore, this method may be used to identify individuals with high accuracy.

Distinguishing thermally altered bones from debris using imaging and fluorescence spectrometry

Bushfires and mass disasters from which result fatal fire victims are two types of events in which Forensic Anthropology acts aiding in the recovery of human remains and the identification of the victims. This is a challenging job since bones that have undergone fire-caused alterations can be unrecognizable. Therefore, collecting evidence at the scene is very important and should be thorough. To evaluate the potential of the application of optical techniques for the recovery and analysis of burnt skeletal material in forensic contexts, this exploratory study focused on analysing reflectance and luminescence properties of bone to differentiate between skeletal remains and debris. The sample includes burnt human bones, as well as non-human bones and debris (like metal, fabric, and others). The reflectance experiments revealed to be quite ineffective, not showing a response pattern that allowed for discrimination between skeletal remains and debris. Three techniques were used to detect luminescence, which included imaging (with a camera), fluorescence spectrometry, and laser-induced fluorescence spectroscopy (excitation: 440 nm). Luminescence results were more promising, registering a positive response for several samples, with a general consistency of results between the different methodologies. Nevertheless, burning conditions and individual characteristics (e.g., pathologies) can introduce limitations to the techniques.

Review of direct PCR and Rapid DNA approaches to streamline sexual assault kit testing

Crime laboratories have been faced with large casework backlogs due to lengthy processing times, limited resources and scientists, and rising crime rates. Evidence related to sexual assault crimes, specifically sexual assault kits (SAKs), heavily contribute to the reported backlogs. Although more sensitive, faster chemistries and automated techniques have been implemented over the years, the traditional STR workflow remains relatively unchanged. Enhanced workflows such as direct PCR and Rapid DNA have the potential to streamline the processing of forensic evidence items including those commonly submitted in SAKs, but the FBI QAS guidelines restrict CODIS-approved labs from implementing these methods for forensic samples. Recent studies have shown decreased turnaround times and improved or comparable profiling success with both approaches. However, review of the literature shows a lack of in-depth research comparing traditional DNA workflows to faster and more sensitive direct PCR and/or Rapid DNA approaches for evidentiary samples, especially for SAKs. By providing the forensic science and criminal justice communities with the strengths and limitations of direct PCR and Rapid DNA methods, stakeholders and policy makers may be better informed.

Analysis of rapid HIT application to touch DNA samples

Rapid DNA technology is being utilized for reference profiles worldwide. There is also strong data in the literature to support its use for high-template DNA sources, the same is not true for low-template sources, such as touch DNA; this is a requirement before wider implementation to forensic casework is considered. We report on the Rapid HIT Intel cartridge's ability to facilitate successful amplification of touch DNA to obtain profiles from template deposited on items commonly encountered in forensic casework. Eight items were touched in ten replicates- two were tapelifted, three swabbed, and three directly inserted. Significance was observed in the alleles amplified and RFU with respect to sample type. Three samples performed well: cable tie, fabric, and matchstick. As two of these were directly inserted, this should be considered for any sample small enough. Placement of highly absorbent substrates into the cartridge is not advised as it can cause a lysate-pull error. Heterozygote loci often presented as homozygous (32%-78% loci per profile); this was influenced by substrate type and profile RFU. Loci with larger masses exhibited higher false homozygosity also. Comparison of the donor's profile analyzed was performed against previous datasets analyzing touch DNA through standard workflow, including manual DNA extraction, PCR, and CE separation. These data show that for all substrates, except for a fabric swatch, standard processing is preferential to Rapid HIT analysis. In its current form, rapid DNA technology is not fit for the routine analysis of touch DNA samples in forensic casework.

Corrigendum: Dreading Yet Hoping: Traumatic Loss Impacted by Reference DNA Sample Collection for Families of Missing People

[This corrects the article DOI: 10.3389/fpsyt.2022.866269.].

Dreading Yet Hoping: Traumatic Loss Impacted by Reference DNA Sample Collection for Families of Missing People

The trauma of having a family member missing is commonly described as an ambiguous loss where the finality of the loss is not realized, as is experienced with a death. There is uncertainty due to the trauma of the absence and subsequent police investigation, leading to physical and emotional impacts for the aftercare of those left behind. There are 850 unidentified human remains and 2,600 long-term missing persons cases in Australia. The Australian Federal Police (AFP) National DNA Program for Unidentified and Missing Persons aims to scientifically link these cases using modern DNA techniques and databases. A DNA-led identification effort may assist to provide answers to Australian families searching for missing relatives, but may also contribute to the trauma experienced by these families. A literature review demonstrated empirical research for the development of scientific best practices for the collection of reference DNA samples for forensic purposes, but minimal evidence about the impact of reference DNA sample collection on kin when attempting to identify the deceased remains of missing people in non-mass casualty situations. The aim of this study was to develop an academically robust understanding of the unique impact of reference DNA sample collection on families of missing persons and support pathways tailored to the experience. This study involved 26 Australian families of long-term missing (ranging from 1 to 20+ years) people in Australia anonymously completing a mixed-methods online survey about their experiences of providing reference DNA samples to aid missing persons investigations. Respondents were representative of a range of ages, genders and relationships to the missing individual. The thematic analysis of the survey results identified the provision of a reference DNA sample: (1) resembles an overt act of hope as families perceive their sample assists the investigation, whilst also being traumatic, triggered by the prospect of scientifically matching their missing family member to a set of unknown human remains; (2) can cause immediate interpersonal impacts and ongoing impacts to families' wellbeing; and (3) can be improved by considering the environment where the sample is collected, professionalism of the police officer collecting the sample, timeliness of the provision of the sample, level of support provided during and after sample collection, and effective communication of forensic procedures and processes as they relate to the missing persons investigation. The study concludes that the complexity associated with provision of family reference samples requires the development and implementation of best practice guidelines, including psycho-education strategies to be used by practitioners to minimize the vicarious trauma for relatives already traumatized by the loss of their missing family member. These guidelines would support the objectives of the AFP Program and benefit all routine missing persons investigations.

An in-field evaluation of rapid DNA instruments for disaster victim identification

In 2019 and 2020, disaster victim identification (DVI) simulations were conducted at the Australian Facility for Taphonomic Experimental Research. Whole and fragmented cadavers were positioned to replicate a building collapse scenario and left to decompose for up to 4 weeks. This study evaluated the utility of the ANDE™ 6C Rapid DNA System and the RapidHIT^TM ID System for DVI in the field and mortuary. Applying post-mortem nail and tissue biopsy samples showed promise, with the added benefit of minimally invasive collection procedures and limited preparation requirements. The preferred platform will depend on a number of factors, including its intended use and operating environment.

Validation of the Applied Biosystems RapidHIT ID instrument and ACE GlobalFiler Express sample cartridge

Rapid DNA platforms are fully automated systems capable of processing DNA from biological samples and interpreting the results in approximately 90 minutes with minimal human intervention. With a greater reliance on the system than on the analyst, validation data are especially needed to define the performance and limitations of commercially available Rapid DNA systems. Thus, validation studies of a Rapid DNA workflow consisting of the Applied Biosystems RapidHIT ID Instrument and RapidLINK software with a focus on the ACE GlobalFiler Express Sample Cartridge and reference buccal swabs were performed in accordance with Scientific Working Group on DNA Analysis Methods Validation Guidelines. These validation studies included assessments of sensitivity, contamination, concordance, reproducibility and repeatability, stability, inhibition, mixtures, sample reprocessing, precision, and first-pass success rate. Overall, the current Applied Biosystems RapidHIT ID Instrument with the ACE GlobalFiler Express sample cartridge was found to be a reliable tool for generation of STR profiles from reference-type buccal swabs.

Effect of postmortem interval and conditions of teeth on STR based DNA profiling from unidentified dead bodies

Teeth are important exhibits to establish the identity of unidentified dead bodies by DNA profiling. Tooth acts as a cage to protect DNA from harsh environmental conditions. Unidentified bodies are sometimes found many years after death causing loss of valuable soft tissues which can be used for DNA extraction. Skeletal remains and dental evidence provide the best alternative when decomposed or burnt bodies are examined to establish the identity. In this study, the powder-free method was used to extract DNA from ninety-five teeth of unidentified dead bodies across seven years (2014-2020). Intact and broken dental remains were analyzed majorly from decomposed remains. The present study reports successful STR profiles obtained from dental evidence using powder free method. Complete DNA profiles were obtained from intact teeth while damaged teeth either gave partial profiles or no results. This data suggest that intact teeth are excellent samples for DNA profiling from decomposed unidentified dead bodies even with greater post mortem interval. Findings from this study can hence be useful in establishing the identity in forensic and archeological casework.

Assessment of the ANDE 6C Rapid DNA system and investigative biochip for the processing of calcified and muscle tissue

The ANDE 6C Rapid DNA system could offer a potential alternative for the processing of calcified and soft tissue samples, often encountered in mass disaster scenarios. While originally designed for single source buccal swabs, interest in the performance of these instruments when using other types of single source samples continues to grow. To enhance the recovery of otherwise lesser quality samples, the manufacturer developed the investigative biochip, an alternative to the NDIS approved Arrestee biochip for reference sample buccal swabs. This study explores the viability of using the ANDE 6C system and the investigative biochip to process soft and calcified tissue, and uses conventional sample processing to contrast the results. Though the success rate obtained using the instrument's expert system was lower than expected - 0% muscle, 11% ribs, and 50% teeth -, the ANDE 6C offers an advantage over conventional calcified tissue processing in terms of turn-around time and processing complexity. If robust analysis parameters can be established to allow the evaluation of the generated data by a qualified analyst on a third party software platform, the use of the ANDE 6C and investigative biochip could be a suitable alternative for currently employed procedures. However, as is the case with conventional DNA typing, the quantity, age, type of biological material and quality of the exemplars could all play a role in the success of the ANDE 6C typing process. In addition, it appears as if the calcified tissue pre-processing protocol that provides the better opportunity for the ANDE 6C success is not appropriate to be carried out in the field or by non-trained personnel as special equipment as well as a certain level of exe expertise and technique is necessary. Nevertheless, disaster victim and unidentified human remain samples could be processed in a laboratory setting using the Rapid DNA ANDE 6C platform provided sufficient material is available to conduct a second, 'rescue' sample processing if necessary.

Evaluation of rapid DNA using ANDE™ in a technical exploitation Level 2 laboratory workflow

A trial of rapid DNA (rDNA), a fully automated DNA profiling system, within a technical exploitation (TE) workflow is an important endeavor. In the 2019 Ardent Defender (AD) exercise, the Deployable Technical Analysis Laboratory (DTAL), of the Canadian Department of National Defence (DND), evaluated the use of rDNA using ANDE™. Sixteen samples were processed during a pre-exercise "controlled" setting, 44 samples were from an "uncontrolled" environment during the exercise, and 22 samples were buccal swabs. The proportion of profiles suitable for upload to ANDE™ was 95.5% of buccal samples (21/22), 66.7% controlled samples, and 15.9% for uncontrolled samples. A considerable difference was observed in the proportions of complete DNA profiles obtained from all exploited items between the controlled (58.3%) and uncontrolled (15.9%) trials and in the proportions of samples where no DNA was detected (16.7% controlled trial vs. 56.8% uncontrolled trial). Overall, the trials highlighted the potential to gain identity intelligence using rDNA within a TE workflow and revealed the impact of operational constraints and the need to improve certain TE practices to gain the most benefit from rDNA. It also demonstrated the benefit of including an uncontrolled component for a more realistic indication of rDNA effectiveness in operational settings and highlighted operational practices impacting rDNA success. Mixture deconvolution was difficult as current guidelines do not consider some of the stochastic effects produced by the rDNA analysis; however, overall, the study demonstrated that rDNA using the ANDE™ instrument could be successfully incorporated into a TE workflow within a deployable laboratory.

Comparative Analysis of ANDE 6C Rapid DNA Analysis System and Traditional Methods

Rapid DNA analysis is an ultrafast and fully automated DNA-typing system, which can produce interpretable genetic profiles from biological samples within 90 minutes. This "swab in-profile out" method comprises DNA extraction, amplification by PCR multiplex, separation and detection of DNA fragments by capillary electrophoresis. The aim of study was the validation of the Accelerated Nuclear DNA Equipment (ANDE) 6C system as a typing method for reference samples according to the ISO/IEC 17025 standard. Here, we report the evaluation of the validity and reproducibility of results by the comparison of the genetic profiles generated by the ANDE 6C System with those generated by standard technologies. A quantity of 104 buccal swabs were analyzed both through the ANDE 6C technology and the traditional method (DNA extraction and quantification, amplification and separation by capillary electrophoresis). Positive typing was observed in 97% of cases for ANDE 6C technology with only three buccal swabs failing to reveal interpretable signals. Concordance was determined by comparing the allele calls generated by ANDE 6C and conventional technology. Comparison of 2800 genotypes revealed a concordance rate of 99.96%. These results met the ISO/IEC 17025 requirements, enabling us to receive the accreditation for this method. Finally, rapid technology has certainly reached a level of reliability which has made its use in laboratories of forensic genetics a reality.