Presence of Electrostatically Adsorbed Polysaccharides Improves Spray Drying of Liposomes

Liposomal propolis loaded xanthan gum-salep hydrogels: Preparation, characterization, and in vitro bioaccessibility of phenolics

Liposomes are gaining interest in food and pharmaceutical applications due to their biocompatibility and non-toxicity. However, they suffer from low colloidal stability, leakage of encapsulated substances, and poor resistance to intestinal digestive conditions. To address these issues, propolis extract (PE) was encapsulated within a hybrid system combining liposomes and hydrogels. PE encapsulated in phosphatidylcholine liposome formulations incorporated with two different food additives: polyethylene sorbitan monooleate (T80) and ammonium phosphatide (AMP) was embedded in xanthan gum-salep hydrogels. The embedded liposomes protected their structure and did not change the flow behaviour of the hydrogels. AMP-liposomal gels exhibited a stronger solid character. The mucoadhesiveness of liposomal gels was mostly governed by the higher xanthan gum ratio, while PE loading also yielded higher mucoadhesiveness. The bioaccessibility (BI%) of the phenolic compounds ranged from 10.13 to 582.75 % in the liposomal gel. The proposed hybrid encapsulation method not only provided enhanced solubility to hydrophobic PE but also protected its phenolic compounds against simulated digestion conditions. Moreover, converting aqueous liposomes into gel structures would also expand their application range in various functional food formulations.

Fabrication of phenolic loaded spray-dried nanoliposomes stabilized by chitosan and whey protein: Digestive stability, transepithelial transport and bioactivity retention of phenolics

Low bioavailability of phenolic compounds (phenolics) results in low in vivo bioactivity, thus their co-encapsulation could enhance potential health benefits. In this study, reconstitutable nanoliposomes loaded with phenolics varying in solubility were fabricated using spray drying after stabilized by chitosan (CH) or whey protein (WP). The physicochemical properties, biocompatibility, digestive fate, and bioactivity retention of phenolics in different forms were investigated. The surface charge of nanoliposomes (NL) shifted from -18.7 mV to positive due to conjugation with cationic CH (53.1 mV) and WP (14 mV) after spray drying while it was -26.6 mV for only spray-dried phenolics (SDP). Encapsulation efficiency of the tested phenolics ranged between 64.7 % and 95.1 %. Simulated gastrointestinal digestion/Caco-2 cell model was used to estimate the digestive fate of the phenolics yielding up to 3-fold higher bioaccessibility for encapsulated phenolics compared to their native form, combined or individually. However, the cellular uptake or transepithelial transport of phenolics did not differ significantly among formulations, except trans-resveratrol in WP-NL. On the contrary, the suppressive effect of phenolics on fatty acid induced hepatocellular lipid accumulation was strongly dependent on the encapsulation method, no activity was retained by SDP. These findings suggested that reconstitutable nanoliposomes can improve the absorption of phenolics by facilitating their bioaccessibility and thermal and/or processing stability during spray drying.

Fabricating pectin and chitosan double layer coated liposomes to improve physicochemical stability of beta-carotene and alter its gastrointestinal fate

To improve storage stability and gastrointestinal (GI) stability of liposomes, pectin and chitosan double layer coated liposome (P-C-L) was proposed and optimized using electrostatic deposition technique. The physical-chemical properties and GI fate of the carrier were then investigated in comparison to that of chitosan coated liposomes (C-L) and un-coated liposomes (L). The results showed P-C-L was successfully prepared at 0.2 % chitosan and 0.06 % pectin. It was hydrogen bonds between the amino groups in chitosan and liposomal interfacial region, and the interaction between the carboxyl groups in pectin layer and amino groups in chitosan layer maintained the structure of P-C-L after absorption by electrostatic interaction. The double layer coatings could improve chemical stability of the encapsulated β-carotene (βC), as well as the thermal stability of liposomes. What's more, the permeability of liposomal bilayers and βC release mechanism in simulated GI fluids was changed by the polymer coating. P-C-L exhibited better controlled release for βC than C-L and L, and displayer beneficial effect on delivering bioactive agents passing through intensity tract. This may assistant developing more efficient delivery system for bioactive agent.

Protein and polysaccharide based encapsulation of ginger oleoresin: impact of wall materials on powder stability, release rate and antimicrobial characteristics

Ginger oleoresin is widely used as a flavouring agent in many foods. But its bioactive components are unstable as being sensitive to heat, humidity and light. Hence this study proposes the encapsulation of ginger oleoresin in order to protect it and regulate its release in the gastrointestinal system via spray drying utilising whey protein isolate (WPI) and gum Acacia (GA) as wall materials. The feed emulsions used were characterised for emulsion stability, viscosity, droplet size and thermal properties. The GA microcapsules had a substantially greater mean particle diameter (1980 nm) than WPI microcapsules (1563 nm). The WPI microcapsules retained high content of 6-and 8-gingerol (89.57 and 12.54 mg g-1) compared to GA. The WPI microcapsules showed the largest mean inhibition zone with diameter of 16.64 mm against Escherichia coli and 22.68 mm against Staphylococcus aureus making them most effective in preventing the growth of test bacteria. Both WPI and GA microcapsules exhibited zeta potential value in the range of (-21.09 to -27.35 mV) indicating excellent colloidal stability. The highest concentration of antioxidant activity (73.33 %) and total phenols (33.92 mg g-1) was retained by WPI microcapsules in intestinal juice which ensures intestinal regulatory release.

Encapsulation of Hydrophobic Apigenin into Small Unilamellar Liposomes Coated with Chitosan Through Ethanol Injection and Spray Drying

Despite the multiple health benefits, natural flavonoid apigenin has poor aqueous solubility that restricts its delivery in foods. This study investigated the potential of spray-dried chitosan-coated liposomes prepared from scalable methods for the food industry as the delivery carriers for apigenin. Apigenin-loaded small unilamellar liposomes produced from ethanol injection had an encapsulation efficiency of 74.88 ± 5.31%. They were electrostatically stabilised via chitosan coating (0.25% w/v) and spray-dried. Spray-dried chitosan-coated apigenin liposomes (SCAL) exhibited the following powder characteristics: yield 66.62 ± 3.08%, moisture content 4.33 ± 0.56%, water activity 0.2242 ± 0.0548, particle size 10.97 ± 1.55 μm, nearly spherical morphology with wrinkles and dents under microscopic observation. Compared with the unencapsulated apigenin, SCAL demonstrated improved aqueous solubility (10.22 ± 0.18 mg/L), higher antioxidant capacity, and stability against simulated gastrointestinal digestion. The chitosan coating gave a slower in-vitro release of apigenin in SCAL (77.0 ± 6.2%) than that of uncoated apigenin liposomes (94.0 ± 5.3%) at 12 h. The apigenin release kinetics from SCAL could be represented by the Korsmeyer-Peppas model (R2 = 0.971). These findings suggest that SCAL could be a promising delivery system of apigenin for functional food applications.

Preparation and molecular interaction of organic solvent-free piperine pro-liposome from soy lecithin

Pro-liposome is a type of drug delivery system (DDS) with numerous advantages as a stable material with various applicability for several pharmaceutical dosage forms, to effectively deliver the material to reach its target in the human body. Nevertheless, it is mostly designed by employing an organic solvent hence giving rise to safety issues. We have developed a method for the preparation of organic solvent-free liposomes composed of soy lecithin and cholesterol by highlighting the importance of temperature during the initial mixing process, a self-hydration of a thin layer spread film, and a spray-drying technique with a suitable excipient as the carrier. The method was successfully applied to prepare a stable pro-liposome containing 0.17% (w/w) of piperine with an encapsulation efficiency of 95.58 ± 2.91%. Moreover, the study revealed that a piperine molecule forms hydrophobic interaction with six of the adjacent phospholipids in the liposome structure, this information can be useful for researchers designing similar studies. In conclusion, organic solvent-free pro-liposome can be an alternative method in the development of DDS, and several factors could be continuously improved to fulfill the intended pro-liposome characteristic.

Effect of excipient wall materials on the development of ginger oleoresin microcapsules: assessing the physicochemical, antioxidant and structural properties

BACKGROUND

Ginger oleoresin is prone to destruction from air, light and high temperatures and has a limited shelf life if kept improperly. Its viscous and sticky characteristics also make it difficult to handle and utilize. These issues can be solved via microencapsulation. The goal of this research was to evaluate how different wall materials affect the properties of microencapsulated ginger oleoresin powder.

RESULTS

Ginger oleoresin microcapsules were developed through spray drying technique using gum acacia (GA) and whey protein isolate (WPI) as wall materials. The characteristics of the obtained powder, including water activity, wettability and encapsulation efficiency, were evaluated, corresponded to values of 0.20, 90.54 s and 84.15% for whey protein isolate-based ginger oleoresin powder. Whey protein isolate microcapsules also exhibited higher phenolic content (27.26 mg gallic acid equivalents g-1 ), total flavonoid (2.94 mg quercetin equivalents g-1 ) and 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity (68.71%) than GA microcapsules. Both WPI- and GA-based oleoresin microcapsules displayed poor flowability, but possessed a metastable amorphous state as indicated by X-ray diffraction. GA-encapsulated oleoresin microcapsules showed a significant increase in particle size (1983 nm) compared to WPI oleoresin microcapsules. Fourier transform infrared analysis of the developed oleoresin microcapsules indicated no change in molecular structure except for a variation in peak intensity.

CONCLUSION

Whey protein isolate proved to be more efficient in maintaining the physicochemical and antioxidant activity of spray-dried ginger oleoresin powder. The present study revealed whey protein-based oleoresin powder could be used as a therapeutic agent in various nutraceutical applications. © 2022 Society of Chemical Industry.

Electrosprayed chitosan-coated alginate-pectin beads as potential system for colon-targeted delivery of ellagic acid

BACKGROUND

Ellagic acid (EA), a potent dietary antioxidant, has limited bioavailability owing to its rapid absorption in the stomach and small intestine, and EA is transformed to more bioavailable compounds - urolithins - in the colon. An encapsulation system that sustains the release of EA in the gastrointestinal system and delivers more EA into the colon could improve the oral bioavailability of EA. Electrosprayed EA-loaded alginate-pectin beads were produced and coated with low- (LC) and high-molecular-weight chitosan (HC). The EA release from uncoated and coated beads under simulated gastrointestinal conditions was evaluated. The samples were characterized by particle size, gel strength, scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) analysis.

RESULTS

The encapsulation efficiency (EE%) of EA ranged from 49.53% to 69.85% for uncoated beads, which was elevated up to 86.50% by coating, and LC coating provided higher EE%. Pectin addition to alginate and chitosan coating reduced the gel strength and changed the size depending on the molecular weight of chitosan. SEM images of pectin-added beads showed fewer cracks but more wrinkles, and chitosan coating presented more aggregated surfaces. The ionic interaction of alginate-pectin-chitosan and the entrapment of EA were confirmed by FTIR. In the gastric medium, EA release was very low from uncoated beads (15.2-19.8%), and totally restricted by chitosan coating. In the intestinal stage, EA release from LC-coated alginate-pectin beads was only 18%, and it was between 55% and 65% for uncoated or HC-coated counterparts.

CONCLUSION

The LC-coated alginate-pectin beads could be further explored as a potential system for colon-targeted delivery of EA. © 2021 Society of Chemical Industry.

Encapsulation of anthocyanin-rich extract from black chokeberry (Aronia melanocarpa) pomace by spray drying using different coating materials

This study aimed to encapsulate the anthocyanin-rich extract from black chokeberry pomace by using maltodextrin with different DE values as the base coating material and its blends with gum Arabic, xanthan gum or whey protein isolate.

Oxidative Stability of Granola Bars Enriched with Multilayered Fish Oil Emulsion in the Presence of Novel Brown Seaweed Based Antioxidants

Fucus vesiculosus extracts that have both radical scavenging activity and metal chelating ability in vitro were used as natural antioxidant in granola bars enriched with fish oil emulsion by using primary and secondary emulsion systems stabilized by sodium caseinate alone and sodium caseinate-chitosan. The bars were stored at 20 °C and evaluated over a period of 10 weeks by measuring the development of primary and secondary oxidation products. The samples prepared with secondary emulsion system developed less oxidation products probably due to increased interfacial layer thickness that would act as a barrier to the penetration and diffusion of molecular species that promote oxidation. The positive charge of oil droplets in the secondary emulsion may also inhibit iron-lipid interaction through electrostatic repulsion. Additional protection against lipid oxidation was obtained when fish oil emulsions were added to the granola bars especially in combination with acetone and ethanol extracts of Fucus vesiculosus.

Fortification of dark chocolate with spray dried black mulberry (Morus nigra) waste extract encapsulated in chitosan-coated liposomes and bioaccessability studies

Fine-disperse anionic liposomes containing black mulberry (Morus nigra) extract (BME) were prepared by high pressure homogenization at 25,000 psi. Primary liposomes were coated with cationic chitosan (0.4, w/v%) using the layer-by-layer depositing method and mixed with maltodextrin (MD) (20, w/v%) prior to spray drying. After that, spray dried liposomal powders containing BME were added to chocolates with alkalization degrees (pH 4.5, 6, 7.5) at conching temperatures of 40 °C, 60 °C, and 80 °C. The results showed that, compared to spray dried extract, chitosan coated liposomal powders provided better protection of anthocyanin content in both increased temperature and pH. In addition, encapsulation in liposomes enhanced in vitro bioaccessability of anthocyanins. Chocolate was fortified with encapsulated anthocyanins maximum 76.8% depending on conching temperature and pH.