High-pressure treatment of water-filled co-extruded polylactide films: Effect on microstructure, barrier, thermal, and rheological properties

Effect of Mortise and Tenon Structure on the Properties of Wood Flour Polyvinyl Chloride-Laminated Veneer Lumber Co-Extruded Composites

Core-shell composites with strong weather resistance, mechanical strength and creep resistance can be prepared using co-extrusion technology. Considering the weak bonding strength between core-shell interfaces, this study started from the concept of a mortise and tenon combination; three types of conical, rectangular and trapezoidal mortise and tenon joints were prepared, and their bending properties, long-term creep properties, interfacial bonding properties, and dimensional stability properties were tested. Results showed that the mortise and tenon structure could form a mechanical interlock between the outer-shell-layer polyvinyl chloride (PVC) wood-plastic composite (WPVC) and the inner-core-layer laminated veneer lumber (LVL), which could effectively improve the interface bonding property between the two layers. Among them, the trapezoidal mortise and tenon structure had the largest interface bonding force compared with the tapered and rectangular mortise and tenon structure, where the interface bonding strength reached 1.01 MPa. Excellent interface bonding can effectively transfer and disperse stress, so the trapezoidal mortise and tenon structure had the best bending properties and creep resistance, with a bending strength of 59.54 MPa and a bending modulus of 5.56 GPa. In the long-term creep test, the deformation was also the smallest at about 0.2%, and its bending properties, creep resistance and interface bonding performance were also the best. The bending strength was 59.54 MPa and the bending modulus was 5.56 GPa; in the long-term creep test, the strain curve was the lowest, about 0.2%. In addition, the mortise and tenon structure could disperse the stress of the inner shell LVL after water absorption and expansion, thus significantly improving the dimensional stability of the co-extruded composite after water absorption.

Effect of High-Pressure Processing on the Packaging Properties of Biopolymer-Based Films: A Review

Suitable packaging material in combination with high-pressure processing (HPP) can retain nutritional and organoleptic qualities besides extending the product’s shelf life of food products. However, the selection of appropriate packaging materials suitable for HPP is tremendously important because harsh environments like high pressure and high temperature during the processing can result in deviation in the visual and functional properties of the packaging materials. Traditionally, fossil-based plastic packaging is preferred for the HPP of food products, but these materials are of serious concern to the environment. Therefore, bio-based packaging systems are proposed to be a promising alternative to fossil-based plastic packaging. Some studies have scrutinized the impact of HPP on the functional properties of biopolymer-based packaging materials. This review summarizes the HPP application on biopolymer-based film-forming solutions and pre-formed biopolymer-based films. The impact of HPP on the key packaging properties such as structural, mechanical, thermal, and barrier properties in addition to the migration of additives from the packaging material into food products were systemically analyzed. HPP can be applied either to the film-forming solution or preformed packages. Structural, mechanical, hydrophobic, barrier, and thermal characteristics of the films are enhanced when the film-forming solution is exposed to HPP overcoming the shortcomings of the native biopolymers-based film. Also, biopolymer-based packaging mostly PLA based when exposed to HPP at low temperature showed no significant deviation in packaging properties indicating the suitability of their applications. HPP may induce the migration of packaging additives and thus should be thoroughly studied. Overall, HPP can be one way to enhance the properties of biopolymer-based films and can also be used for packaging food materials intended for HPP.