Fish eDNA metabarcoding from aquatic biofilm samples: Methodological aspects

Passive eDNA sampling facilitates biodiversity monitoring and rare species detection

Environmental DNA (eDNA) technology has revolutionized biomonitoring, but challenges remain regarding water sample processing. The passive eDNA sampler (PEDS) represents a viable alternative to active, water filtration-based eDNA enrichment methods, but the effectiveness of PEDS for surveying biodiverse and complex natural water bodies is unknown. Here, we collected eDNA using filtration and glass fiber filter-based PEDS (submerged in water for 1 d) from 27 sites along the final reach of the Yangtze River and the coast of the Yellow Sea, followed by eDNA metabarcoding analysis of fish biodiversity and quantitative PCR (qPCR) for a critically endangered aquatic mammal, the Yangtze finless porpoise. We ultimately detected 98 fish species via eDNA metabarcoding. Both eDNA sampling methods captured comparable local species richness and revealed largely similar spatial variation in fish assemblages and community partitions between the river and sea sites. Notably, the Yangtze finless porpoise was detected only in the metabarcoding of eDNA collected by PEDS at five sites. Also, species-specific qPCR revealed that the PEDS captured porpoise eDNA at more sites (7 vs. 2), in greater quantities, and with a higher detection probability (0.803 vs. 0.407) than did filtration. Our results demonstrate the capacity of PEDS for surveying fish biodiversity, and support that continuous eDNA collection by PEDS can be more effective than instantaneous water sampling at capturing low abundance and ephemeral species in natural waters. Thus, the PEDS approach can facilitate more efficient and convenient eDNA-based biodiversity surveillance and rare species detection.

Use of passive sampling in environmental DNA metabarcoding technology: Monitoring of fish diversity in the Jiangmen coastal waters

Environmental DNA (eDNA) metabarcoding technology is proving to be the most up-to-date and promising method for monitoring marine fish diversity. Fish eDNA is usually collected on a filter membrane after the filtration of water. Not only does this require the use of specialized equipment, but the amount of filtered water needed is also difficult to meet. The recently proposed passive eDNA collection method can expand the sampling scale, providing new perspectives for monitoring marine biodiversity. The role of collection methods in eDNA surveys, however, remains unclear. In this study, a low-cost custom framework with two types of filter membrane materials was used to conduct passive submersion samplings at the north and south ends of Shangchuan Island, Jiangmen, China. After defined periods of submersion, the filter membranes were recovered and eDNA extracted. Metabarcoding techniques were applied to detect fish species information in the eDNA samples. A total of 106 marine fish species from 27 orders, 53 families, and 92 genera, including one cartilaginous fish, were identified in the samples. The majority of fish detected by active filtration were also found in the passively collected samples, within the same location. Both sampling methods, therefore, showed similar species richness. Passive sampling was effective in identifying fish species diversity and provided a higher spatial resolution owing to the sample replicates. Passive sampling was also more sensitive in detecting species that differ significantly in abundance (biomarkers) between different sampling depths. When active filtration is not possible, or when large-scale sampling is the purpose of the study, passive sampling methods certainly provide a promising alternative. The findings of our study provide guidance for fish surveys and continuous bio-stereoscopic monitoring in coastal waters.

Environmental DNA (eDNA) removal rates in streams differ by particle size under varying substrate and light conditions

The use of environmental DNA (eDNA) as a sampling tool offers insights into the detection of invasive and/or rare aquatic species and enables biodiversity assessment without traditional sampling approaches, which are often labor-intensive. However, our understanding of the environmental factors that impact eDNA removal (i.e., how rapidly eDNA is removed from the water column by the combination of decay and physical removal) in flowing waters is limited. This limitation constrains predictions about the location and density of target organisms after positive detection. To address this question, we spiked Common Carp (Cyprinus carpio) eDNA into recirculating mesocosms (n = 24) under varying light (shaded versus open) and benthic substrate conditions (no substrate, bare substrate, and biofilm-colonized substrate). We then collected water samples from each mesocosm at four time points (40 min, 6 h, 18 h, and 48 h), and sequentially filtered the samples through 10, 1.0, and 0.2 μm filters to quantify removal rates for different eDNA particle sizes under varying light and substrate conditions. Combining all size classes, total eDNA removal rates were higher for mesocosms with biofilm-colonized substrate compared to those with no substrate or bare (i.e., no biofilm) substrate, which is consistent with previous findings linking biofilm colonization with increased eDNA removal and degradation. Additionally, when biofilm was present, light availability increased eDNA removal; eDNA levels fell below detection after 6-18 h for open mesocosms versus 18-48 h for shaded mesocosms. Among size classes, larger particles (>10 μm) were removed faster than small particles (1.0-0.2 μm). These results suggest that changes in the distribution of eDNA size classes over time (e.g., with downstream transport) and with differing environmental conditions could be used to predict the location of target organisms in flowing waters, which will advance the use of eDNA as a tool for species monitoring and management.

Molecular Diet Analysis of Asian Clams for Supplementary Biodiversity Monitoring: A Case Study of Nakdong River Estuary

Environmental DNA (eDNA) extracted from the gut contents of filter feeders can be used to identify biodiversity in aquatic ecosystems. In this study, we used eDNA from the gut contents of the Asian clam Corbicula fluminea to examine biodiversity within estuarine ecosystem. Field sampling was conducted at three points in the Nakdong River Estuary, which is characterised by closed estuarine features resulting from the presence of an estuarine barrage. The collected C. fluminea samples were dissected to separate the gut contents, and the extracted eDNA was amplified using 18S V9 primer targeting all eukaryote-derived DNA. The amplified DNA was sequenced using a next-generation sequencing (NGS) technique, and a BLASTn search was performed based on the National Centre for Biotechnology Information (NCBI) database for taxa identification. We obtained 23 unique operational taxonomic units (OTUs), including fish (approximately 8.70%), copepods (approximately 17.39%), and green algae (approximately 21.74%), representing a wide range of habitats. Furthermore, 8 out of the 20 families were identified through comparisons with reference data from conventional field surveys, and the OTUs of elusive migratory fish were detected. The results support the application of C. fluminea as an eDNA sampler for supplementary biodiversity monitoring.

Ultra-sensitive detection of ecologically rare fish from eDNA samples based on the RPA-CRISPR/Cas12a technology

Environmental DNA (eDNA) research holds great promise for improving biodiversity science and conservation efforts by enabling worldwide species censuses in near real-time. Current eDNA methods face challenges in detecting low-abundance ecologically important species. In this study, we used isothermal recombinase polymerase amplification (RPA)-CRISPR/Cas detection to test Ctenopharyngodon idella. RPA-CRISPR-Cas12a detected 6.0 eDNA copies/μL within 35 min. Ecologically rare species were identified in the Three Gorges Reservoir Area (TGRA) using functional distinctiveness and geographical restrictiveness, with seven fish species (9%) classified as potentially ecologically rare including three species in this investigation. RPA-CRISPR/Cas12a-FQ outperformed high-throughput sequencing (HTS) and qPCR in detecting low-abundance eDNA (AUC = 0.883∗∗). A significant linear correlation (R2 = 0.682∗∗) between RPA-CRISPR/Cas12a-FQ and HTS quantification suggests its potential for predicting species abundance and enhancing eDNA-based fish biodiversity monitoring. This study highlights the value of RPA-CRISPR/Cas12a-FQ as a tool for advancing eDNA research and conservation efforts.

Multi-group biodiversity distributions and drivers of metacommunity organization along a glacial-fluvial-limnic pathway on the Tibetan plateau

Extensive global glacial retreats are threatening cryosphere ecosystem functioning and the associated biota in glacier-fed water systems. Understanding multi-group biodiversity distributions and compositional variation across diverse but hydrologically linked habitats under varying glacial influences will help explain the mechanisms underlying glacial community organization and ecosystem processes. However, such data are generally lacking due to the difficulty of obtaining biodiversity information across wide taxonomic ranges. Here, we used a multi-marker environmental DNA metabarcoding approach to simultaneously investigate the spatial patterns of community compositions and assembly mechanisms of four taxonomic groups (cyanobacteria, diatoms, invertebrates, and vertebrates) along the flowpaths of a tributary of Lake Nam Co on the Tibetan Plateau-from its glacier headwaters, through its downstream river and wetlands, to its estuary. We detected 869 operational taxonomic units: 119 cyanobacterial, 395 diatom, 269 invertebrate, and 86 vertebrate. Taxonomic richnesses consistently increased from upstream to downstream, and although all groups showed community similarity distance decay patterns, the trend for vertebrates was the weakest. Cyanobacteria, diatom, and invertebrate community compositions were significantly correlated with several environmental factors, while the vertebrate community was only correlated with waterway width. Variation partitioning analysis indicated that varying extents of environmental conditions and spatial factors affected community organizations for different groups. Furthermore, stochastic processes contributed prominently to the microorganisms' community assembly (Sloan's neutral model R² = 0.77 for cyanobacteria and 0.73 for diatoms) but were less important for macroorganisms (R² = 0.21 for invertebrates and 0.15 for vertebrates). That trend was further substantiated by modified stochasticity ratio analyses. This study provides the first holistic picture of the diverse biotic communities residing in a series of hydrologically connected glacier-influenced habitats. Our results both uncovered the distinct mechanisms that underlie the metacommunity organizations of different glacial organisms and helped comprehensively predict the ecological impacts of the world's melting glaciers.

Pragmatic applications of DNA barcoding markers in identification of fish species – a review

DNA barcoding and mini barcoding involve Cytochrome Oxidase Subunit I (COI) gene in mitochondrial genome and is used for accurate identification of species and biodiversity. The basic goal of the current study is to develop a complete reference database of fishes. It also evaluates the applicability of COI gene to identify fish at the species level with other aspects i.e., as Kimura 2 parameter (K2P) distance. The mean observed length of the sequence was ranging between 500 to 700 base pairs for fish species in DNA barcoding and 80 to 650 base pairs for DNA mini barcoding. This method describes the status of known to unknown samples but it also facilitates the detection of previously un-sampled species at distinct level. So, mini-barcoding is a method focuses on the analysis of short-length DNA markers has been demonstrated to be effective for species identification of processed food containing degraded DNA. While DNA meta-barcoding refers to the automated identification of multiple species from a single bulk sample. The may contain entire organisms or a single environmental sample containing degraded DNA. Despite DNA barcoding, mini barcoding and meta-barcoding are efficient methods for species identification which are helpful in conservation and proper management of biodiversity. It aids researchers to take an account of genetic as well as evolutionary relationships by collecting their morphological, distributional and molecular data. Overall, this paper discusses DNA barcoding technology and how it has been used to various fish species, as well as its universality, adaptability, and novel approach to DNA-based species identification.

Toward quantitative metabarcoding

Amplicon-sequence data from environmental DNA (eDNA) and microbiome studies provide important information for ecology, conservation, management, and health. At present, amplicon-sequencing studies-known also as metabarcoding studies, in which the primary data consist of targeted, amplified fragments of DNA sequenced from many taxa in a mixture-struggle to link genetic observations to the underlying biology in a quantitative way, but many applications require quantitative information about the taxa or systems under scrutiny. As metabarcoding studies proliferate in ecology, it becomes more important to develop ways to make them quantitative to ensure that their conclusions are adequately supported. Here we link previously disparate sets of techniques for making such data quantitative, showing that the underlying polymerase chain reaction mechanism explains the observed patterns of amplicon data in a general way. By modeling the process through which amplicon-sequence data arise, rather than transforming the data post hoc, we show how to estimate the starting DNA proportions from a mixture of many taxa. We illustrate how to calibrate the model using mock communities and apply the approach to simulated data and a series of empirical examples. Our approach opens the door to improve the use of metabarcoding data in a wide range of applications in ecology, public health, and related fields.

Recommendations for the preservation of environmental samples in diatom metabarcoding studies

Implementation of DNA metabarcoding for diatoms for environmental monitoring is now moving from a research to an operational phase, requiring rigorous guidelines and standards. In particular, the first steps of the diatom metabarcoding process, which consist of sampling and storage, have been addressed in various ways in scientific and pilot studies and now need to be rationalised. The objective of this study was to compare three currently applied preservation protocols through different storage durations (ranging from one day to one year) for phytobenthos and phytoplankton samples intended for diatom DNA metabarcoding analysis. The experimental design used samples from four freshwater and two marine sites of diverse ecological characteristics. The impact of the sample preservation and storage duration was assessed through diatom metabarcoding endpoints: DNA quality and quantity, diversity and richness, diatom assemblage composition and ecological index values (for freshwater samples). The yield and quality of extracted DNA only decreased for freshwater phytobenthos samples preserved with ethanol. Diatom diversity was not affected and their taxonomic composition predominantly reflected the site origin. Only rare taxa (< 100 reads) differed among preservation methods and storage durations. For biomonitoring purposes, freshwater ecological index values were not affected by the preservation method and storage duration tested (including ethanol preservation), all treatments returning the same ecological status for a site. This study contributes to consolidating diatom metabarcoding. Thus, accompanied by operational standards, the method will be ready to be confidently deployed and prescribed in future regulatory monitoring.

Fishing for fish environmental DNA: Ecological applications, methodological considerations, surveying designs, and ways forward

Vast global declines of freshwater and marine fish diversity and population abundance pose serious threats to both ecosystem sustainability and human livelihoods. Environmental DNA (eDNA)-based biomonitoring provides robust, efficient, and cost-effective assessment of species occurrences and population trends in diverse aquatic environments. Thus, it holds great potential for improving conventional surveillance frameworks to facilitate fish conservation and fisheries management. However, the many technical considerations and rapid developments underway in the eDNA arena can overwhelm researchers and practitioners new to the field. Here, we systematically analysed 416 fish eDNA studies to summarize research trends in terms of investigated targets, research aims, and study systems, and reviewed the applications, rationales, methodological considerations, and limitations of eDNA methods with an emphasis on fish and fisheries research. We highlighted how eDNA technology may advance our knowledge of fish behaviour, species distributions, population genetics, community structures, and ecological interactions. We also synthesized the current knowledge of several important methodological concerns, including the qualitative and quantitative power eDNA has to recover fish biodiversity and abundance, and the spatial and temporal representations of eDNA with respect to its sources. To facilitate ecological applications implementing fish eDNA techniques, recent literature was summarized to generate guidelines for effective sampling in lentic, lotic, and marine habitats. Finally, we identified current gaps and limitations, and pointed out newly emerging research avenues for fish eDNA. As methodological optimization and standardization improve, eDNA technology should revolutionize fish monitoring and promote biodiversity conservation and fisheries management that transcends geographic and temporal boundaries.