A Human Clinical, Histological, Histomorphometrical, and Radiographical Study on Biphasic HA-Beta-TCP 30/70 in Maxillary Sinus Augmentation

Digital planning and bone regenerative technologies: A narrative review

OBJECTIVES

The aim of this narrative review was to explore the application of digital technologies (DT) for the simplification and improvement of bone augmentation procedures in advanced implant dentistry.

MATERIAL AND METHODS

A search on electronic databases was performed to identify systematic reviews, meta-analyses, randomized and non-randomized controlled trials, prospective/retrospective case series, and case reports related to the application of DT in advanced implant dentistry.

RESULTS

Seventy-nine articles were included. Potential fields of application of DT are the following: 1) the use of intra-oral scanners for the definition of soft tissue profile and the residual dentition; 2) the use of dental lab CAD (computer-aided design) software to create a digital wax-up replicating the ideal ridge and tooth morphology; 3) the matching of STL (Standard Triangulation Language) files with DICOM (DIgital COmmunication in Medicine) files from CBCTs with a dedicated software; 4) the production of stereolithographic 3D models reproducing the jaws and the bone defects; 5) the creation of surgical templates to guide implant placement and augmentation procedures; 6) the production of customized meshes for bone regeneration; and 7) the use of static or dynamic computer-aided implant placement.

CONCLUSIONS

Results from this narrative review seem to demonstrate that the use of a partially or fully digital workflow can be successfully used also in advanced implant dentistry. However, the number of studies (in particular RCTs) focused on the use of a fully digital workflow in advanced implant dentistry is still limited and more studies are needed to properly evaluate the potentials of DT.

Additive Manufacturing Titanium Dental Implants Placed in Sinuses Grafted with 70HA:30-TCP: A One-Year Retrospective Study for Evaluation of Survival Rate

The present short-term retrospective study evaluated the implant survival rate and peri-implant bone loss around additive-manufactured titanium implants placed in sinuses grafted with Plenum Osshp (Plenum Bioengenharia, Jundia, SP, Brazil) (70HA:30β-TCP) material. A total of 39 implants were inserted after 23 sinus floor elevation procedures in 16 consecutive patients. Prosthetic rehabilitation included fixed partial prostheses (three units), single crowns (eleven units), and fixed full arches (three units). Clinical and radiographic parameters of implant-supported restorations were evaluated after at least one year of occlusal loading. The implant-crown success criteria included the absence of pain, suppuration, and clinical mobility, an average distance between the implant shoulder and the first visible bone contact (DIB) < 1.0 mm from the initial surgery, and the absence of prosthetic complications at the implant-abutment interface. The overall cumulative implant survival rate was 97.43%. No prosthetic complications at the implant-abutment interface were reported. After one year, the mean DIB was 0.23 mm ± 0.14. Within the limits of this retrospective study, it can be concluded that 70 HA:30 β-TCP allowed stable and reliable bone support to maintain healthy conditions around titanium dental implants produced by additive manufacturing.

Implant stability and clinical outcome between implant placement using internal sinus floor elevation with alloplastic bone material grafting and without grafting: A 1-year randomized clinical trial

OBJECTIVE

To compare implant stability and clinical outcome in implant placement between osteotome sinus floor elevation (OSFE) with biphasic calcium phosphate (BCP) which consisted of 30% of hydroxyapatite (HA) and 70% of beta-tricalcium phosphate (β -TCP) grafting material and OSFE without using bone grafting material. The research questions is whether the BCP provides any benefit in OSFE or not.

MATERIALS AND METHODS

Thirty patients (30 implants) with a single edentulous area of upper premolar or molar were randomly separated into OSFE with BCP (n = 15) and OSFE without grafting (n = 15). The patients were reevaluated 3, 6, 9, and 12 months after implant loading. The clinical assessments (implant stability quotient (ISQ), implant survival-failure rate, and surgical complication) were analyzed. Together with radiographic assessments in 2D (endo-sinus bone gain (ESBG), mean marginal bone change (MMBC)) and 3D (endo-sinus bone gain in CBCT (ESBG-CT)) were evaluated, with a mean follow-up time of at least 12 months of functional loading and prosthetic complication.

RESULTS

20 remaining implants (OSFE with BCP, n = 10; OSFE without grafting, n = 10) were analyzed. Mean ISQ was 79.18 ± 3.43 in 1-year follow-up (ISQ; OSFE with BCP = 78.72 ± 3.46, OSFE without grafting = 79.65 ± 3.52). ISQ in both groups increased steadily without significant differences in each follow-up. (p = 0.56). In radiographic evaluation, at 6-, 9-, and 12-month, OSFE without grafting group showed statistically significant lower MMBC (p < 0.05). The 1-year clinical results showed that 2 implants failed in OSFE with BCP, and 1 implant failed in OSFE without grafting.

CONCLUSIONS

Graft material "BCP" (HA30:TCP70) coupled with OSFE presents no extraordinary benefit in implant stability, clinical and radiographic outcome in 1-year follow-up.

CLINICAL RELEVANCE

Clinically, OSFE with grafting materials provides no additional benefit.

CLINICAL TRIAL REGISTRATION NUMBER

TCTR20210517008 (date of registration: May 17, 2021).

Custom-Made Direct Metal Laser Sintering Titanium Subperiosteal Implants in Oral and Maxillofacial Surgery for Severe Bone-Deficient Patients—A Pilot Study

Background: Nowadays, a combination of classical subperiosteal implant designs with 3D imaging and printing allows one to reduce treatment time and provides support for fixed prostheses in cases where other techniques do not provide satisfactory results. This study aims to present a digital technique for the manufacturing of custom-made subperiosteal implants and what complications might appear after this type of surgery. Methods: Sixteen patients treated with a custom-made DMLS titanium subperiosteal implant during the period between October 2021 and February 2022 were enrolled in the study. Orthopantomography (OPT) and cone-beam computer tomography (CBCT) were recorded for all patients. The measurements taken into account in this study were the fit and stability of implants, duration of surgery, implant survival, and early and late complications. Results: The fit of the implants was extremely satisfactory, with a mean rating of 4 out of 5. The mean duration of the intervention was 86.18 min. At the end of the study, one implant was lost due to insufficient fit and recurrent, untreatable infections. Eleven implants (69%) were placed on the maxillary and five (31%) implants were placed on the mandible. Conclusions: Taking this into consideration, custom-made DMLS titanium subperiosteal implants could present satisfactory implant survival and low complication rates.

Histological and Biological Response to Different Types of Biomaterials: A Narrative Single Research Center Experience over Three Decades

Background: In more than three decades of work of the Retrieval Bank of the Laboratory for Undemineralized Hard Tissue Histology of the University of Chieti-Pescara in Italy, many types of biomaterials were received and evaluated. The present retrospective review aimed to evaluate the histological and biological aspects of the evaluated bone substitute biomaterials. Methods: In the present study, the authors prepared a retrospective analysis after the screening of some databases (PubMed, Scopus, and EMBASE) to find papers published from the Retrieval Bank of the Laboratory for Undermineralized Hard Tissue Histology of the University of Chieti-Pescara analyzing only the papers dealing with bone substitute biomaterials and scaffolds, in the form of granules and block grafts, for bone regeneration procedures. Results: Fifty-two articles were found, including in vitro, in vivo, and clinical studies of different biomaterials. These articles were evaluated and organized in tables for a better understanding. Conclusions: Over three decades of studies have made it possible to assess the quality of many bone substitute biomaterials, helping to improve the physicochemical and biological properties of the biomaterials used in daily clinical practice.

Influence of Concentration Levels of β-Tricalcium Phosphate on the Physical Properties of a Dental Adhesive

Our study assessed the influence of integrating 5% and 10% tricalcium phosphate (β-TCP-Ca₃(PO₄)₂.) nanoparticles into a dental adhesive on the adhesive’s bonding. To evaluate the filler nanoparticles, scanning electron microscopy (SEM), Energy Dispersive X-Ray (EDX) spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, and micro-Raman spectroscopy techniques were used. Shear Bond strength (SBS) testing, degree of conversion (DC) analysis, investigation of the adhesive–dentin interface, and biofilm experiments were conducted. The SEM micrographs revealed non-uniform agglomerates, while the EDX demonstrated the existence of oxygen ‘O’ (24.2%), phosphorus ‘P’ (17.4%) and calcium ‘Ca’ (60.1%) in the β-TCP nanoparticles. The FTIR and micro-Raman spectra indicated characteristic bands for β-TCP containing materials. The 10 wt.% β-TCP adhesive presented the highest SBS values (NTC-10 wt.% β-TCP: 33.55 ± 3.73 MPa, TC-10 wt.% β-TCP: 30.50 ± 3.25 MPa), followed by the 5 wt.% β-TCP adhesive (NTC-5 wt.% β-TCP: 32.37 ± 3.10 MPa, TC-5 wt.% β-TCP: 27.75 ± 3.15 MPa). Most of the detected failures after bond strength testing were adhesive in nature. The β-TCP adhesives demonstrated suitable dentin interaction by forming a hybrid layer (with few or no gaps) and resin tags. The β-TCP adhesives (10 wt.%) revealed lower DC values compared to control. The incorporation of 5 and 10 wt.% concentrations of β-TCP particles resulted in an increase in SBS values. A linear decline in DC values was witnessed when the nanoparticle concentration was increased. Further research focusing on exploring the influence of higher filler concentrations on adhesive’s properties is recommended.

Loading of erythropoietin on biphasic calcium phosphate bioceramics promotes osteogenesis and angiogenesis by regulating EphB4/EphrinB2 molecules

Improving osteogenesis and angiogenesis using different cells and drugs is critical in the field of bone tissue engineering. Recent research has found that erythropoietin (EPO) plays an important role in both osteogenesis and angiogenesis. In this study, we grafted polydopamine and EPO onto the surface of biphasic calcium phosphate. The characterization and release property of the modified bioceramics were assessed. Cell proliferation, expression of osteoblastic and endothelial markers, and EphB4/EphrinB2 molecules were investigated while employing co-cultures of two different cells [rat vein endothelial cells (VECs) and rat bone marrow mesenchymal stromal cells (BMSCs)]. The modified bioceramics were finally implanted into the SD rats' femurs and followed by investigating the bone defect repair efficacy and the expression of EphB4/EphrinB2 molecules in vivo. The results indicated that the modified bioceramics could control the release of EPO continuously. The osteogenesis and angiogenesis were improved along with the increased expression of EphB4/EphrinB2 molecules. The expression of EphB4/EphrinB2 molecules was also significantly increased in vivo and the bone defect was repaired effectively. Overall, our findings demonstrated that EPO loading on biphasic calcium phosphate bioceramics could promote both osteogenesis and angiogenesis. The results suggest that EphB4/EphrinB2 may be crucial in the process. Graphical abstract.

Effects of Tissue-engineered Bone by Coculture of Adipose-derived Stem Cells and Vascular Endothelial Cells on Host Immune Status

AIM

The study aimed to explore the effects of tissue-engineered bone constructed with partially deproteinized biologic bone (PDPBB) and coculture of adipose-derived stem cells (ADSCs) and vascular endothelial cells (VECs) on host immune status, providing a very useful clue for the future development of bone engineering.

METHODS

Tissue-engineered bones constructed by PDPBB and ADSCs, VECs or coculture of them were implanted into the muscle bag of bilateral femurs of Sprague-Dawley rats. Partially deproteinized biologic bone alone and blank control were also implanted. After transplantation, the proliferation of implanted seed cells in tissue-engineered bones was labeled by bromodeoxyuridine staining. Moreover, the changes of T-lymphocyte subpopulations, including CD3 + CD4+ and CD3 + CD8+ in peripheral blood were then detected using flow cytometry to analyze the immune rejection of tissue-engineered bone implantation based on peripheral blood CD4/CD8 ratios.

RESULTS

After transplantation, the proliferation of implanted seed cells was observed in tissue-engineered bones of different groups. At different time points after transplantation, the CD4+/CD8+ ratio in peripheral blood of PDPBB + ADSCs, PDPBB + coculture, and blank control groups did not exhibit significant change. Although the CD4+/CD8+ ratio in peripheral blood of PDPBB + VECs group was significantly higher than other group at 1 week after transplantation, that of PDPBB + VECs and PDPBB + coculture group was significantly decreased at 8 week after transplantation compared with that of blank control group.

CONCLUSIONS

Our results indicated that there was no significant immune rejection after transplantation of tissue-engineered bone constructed with PDPBB and coculture of ADSCs and VECs as seed cells.

Polymeric Scaffolds for Dental, Oral, and Craniofacial Regenerative Medicine

Dental, oral, and craniofacial (DOC) regenerative medicine aims to repair or regenerate DOC tissues including teeth, dental pulp, periodontal tissues, salivary gland, temporomandibular joint (TMJ), hard (bone, cartilage), and soft (muscle, nerve, skin) tissues of the craniofacial complex. Polymeric materials have a broad range of applications in biomedical engineering and regenerative medicine functioning as tissue engineering scaffolds, carriers for cell-based therapies, and biomedical devices for delivery of drugs and biologics. The focus of this review is to discuss the properties and clinical indications of polymeric scaffold materials and extracellular matrix technologies for DOC regenerative medicine. More specifically, this review outlines the key properties, advantages and drawbacks of natural polymers including alginate, cellulose, chitosan, silk, collagen, gelatin, fibrin, laminin, decellularized extracellular matrix, and hyaluronic acid, as well as synthetic polymers including polylactic acid (PLA), polyglycolic acid (PGA), polycaprolactone (PCL), poly (ethylene glycol) (PEG), and Zwitterionic polymers. This review highlights key clinical applications of polymeric scaffolding materials to repair and/or regenerate various DOC tissues. Particularly, polymeric materials used in clinical procedures are discussed including alveolar ridge preservation, vertical and horizontal ridge augmentation, maxillary sinus augmentation, TMJ reconstruction, periodontal regeneration, periodontal/peri-implant plastic surgery, regenerative endodontics. In addition, polymeric scaffolds application in whole tooth and salivary gland regeneration are discussed.

Histomorphometric analysis of the sinus lateral wall and Schneiderian membrane: A cadaveric study

OBJECTIVES

Sinus augmentation is frequently used to maintain implant stability when there is severe alveolar bone loss. The aim of this study was to determine the thicknesses and histologic features of the sinus lateral wall and Schneiderian membrane in embalmed cadavers.

DESIGN

This study included 35 hemimaxillae from 25 cadavers (19 males and 6 females with a mean age at death of 59 years). Specimens obtained from the first premolar to the second molar were embedded in paraffin, stained with hematoxylin-eosin, and observed under a light microscope. The thicknesses of the lateral wall and Schneiderian membrane were measured according to tooth site and measurement level, and their histologic features were evaluated.

RESULTS

The mean thicknesses of the lateral wall were 2.22, 2.17, 2.64, and 2.64 mm at the first premolar, second premolar, first molar, and second molar, respectively, and 2.79, 2.24, and 2.12 mm at 0, 2, and 8 mm from the sinus floor. The mean thickness of the Schneiderian membrane did not differ significantly between at the sinus floor (0.41 mm) and 2 mm above the floor (0.38 mm). The lateral wall consisted of the outer cortical plate, trabecular bone in the center, and the inner cortical plate near the Schneiderian membrane, being the inner cortical plate the more porous.

CONCLUSIONS

These histomorphometric results for the sinus lateral wall and Schneiderian membrane are expected to provide relevant information for use in sinus augmentation procedures.

Bone Regeneration Using PEVAV/β-Tricalcium Phosphate Composite Scaffolds in Standardized Calvarial Defects: Micro-Computed Tomographic Experiment in Rats

Bone regeneration using beta-tricalcium phosphate (β-TCP) can be practiced using a biocomposite scaffold. Poly(ethylene-co-vinylalcohol)/poly(δ-valerolactone)/β-tricalcium phosphate (PEVAV/β-TCP) composite scaffolds showed promising in vitro results. This study evaluated the bone regenerative potential of PEVAV/β-TCP biocomposite scaffolds in standardized calvarial defects in a rat model over 4 and 10 weeks. Bilateral calvarial defects (5 mm in diameter and about 1.5 mm thick, equivalent to the thickness of the calvaria) were created in 40 male Wistar albino rats. The defects were grafted with either commercially available β-TCP (positive control), PEVAV/β-TCP 70, or PEVAV/β-TCP 50, or left empty (negative control), depending on the group to which the animal was randomly assigned, to be covered before flap closure with resorbable collagen membrane (RCM). At 4 and 10 weeks post-surgery, the collected rat calvaria were evaluated using micro computed tomography (micro-CT) analysis, to assess the newly formed bone volume (NFBV), newly formed bone mineral density (NFBMD), and remaining graft volume (RGV). The results showed that calvarial defects grafted with the PEVAV/β-TCP biocomposite exhibited higher NFBV than did control defects, both at 4 and 10 weeks post-surgery. Furthermore, calvarial defects grafted with PEVAV/β-TCP 70 showed the highest NFBV among all grafting conditions, with a statistically significant difference recorded at 10 weeks post-surgery. The PEVAV/β-TCP composite scaffold showed potentiality for the regeneration of critical-sized calvarial bone defects in a rat model.

Case Report: Histological and Histomorphometrical Results of a 3-D Printed Biphasic Calcium Phosphate Ceramic 7 Years After Insertion in a Human Maxillary Alveolar Ridge

Introduction: Dental implant placement can be challenging when insufficient bone volume is present and bone augmentation procedures are indicated. The purpose was to assess clinically and histologically a specimen of 30%HA-60%β-TCP BCP 3D-printed scaffold, after 7-years.

Case Description: The patient underwent bone regeneration of maxillary buccal plate with 3D-printed biphasic-HA block in 2013. After 7-years, a specimen of the regenerated bone was harvested and processed to perform microCT and histomorphometrical analyses.

Results: The microarchitecture study performed by microCT in the test-biopsy showed that biomaterial volume decreased more than 23% and that newly-formed bone volume represented more than 57% of the overall mineralized tissue. Comparing with unloaded controls or peri-dental bone, Test-sample appeared much more mineralized and bulky. Histological evaluation showed complete integration of the scaffold and signs of particles degradation. The percentage of bone, biomaterials and soft tissues was, respectively, 59.2, 25.6, and 15.2%. Under polarized light microscopy, the biomaterial was surrounded by lamellar bone. These results indicate that, while unloaded jaws mimicked the typical osteoporotic microarchitecture after 1-year without loading, the BCP helped to preserve a correct microarchitecture after 7-years.

Conclusions: BCP 3D-printed scaffolds represent a suitable solution for bone regeneration: they can lead to straightforward and less time-consuming surgery, and to bone preservation.

Clinical and histological outcomes of maxillary sinus floor augmentation with synthetic bone substitutes for dental implant treatment: A meta-analysis

The objective of the present review was to gather all available human randomized clinical trials comparing the clinical and histological results of synthetic bone substitutes used in maxillary sinus floor augmentation. Authors electronically searched in Pubmed/Medline, Scopus and Cochrane databases to analyse the success of endosseous dental implant, implant failure, peri-implant marginal bone loss, newly formed bone and residual bone graft material.  After the search, ten randomized clinical trials were included. Four studies ranging from low to unclear risk of bias were used for meta-analysis, being able to compare only biphasic calcium phosphate (BCP) and deproteinized bovine bone (DBB). A greater amount of residual graft material (mean difference -MD- 4.80 mm; 95% CI, 9.35 to 0.26; P= 0.040) was found in DBB group. No other statistically significant differences were found between BCP and DBB for the rest of outcomes. Thus, our results suggested that BCP can be considered a suitable alternative to DBB in maxillary sinus floor augmentation due to its clinical and histological results.

Integrated 3D Information for Custom-Made Bone Grafts: Focus on Biphasic Calcium Phosphate Bone Substitute Biomaterials

Purpose: Several studies showed that the sintering temperature of 1250 °C could affect the formation of α-Ca₃(PO₄)₂, which is responsible for the reduction of the hardness value of biphasic calcium phosphate biocomposites, but they did not evaluate the inference of the sintering time at peak temperature on transition of β-Ca₃(PO₄)₂ to α-Ca₃(PO₄)₂. This analysis explored, in an innovative way, inferences and correlations between volumetric microstructure, mechanical properties, sintering temperature, and time at peak temperature in order to find the best sintering conditions for biphasic calcium phosphate composites grafted in severe alveolar bone defects. Methods: Sintered biphasic calcium phosphates (30%-hydroxyapatite/70%-tricalcium phosphate) were tested by microCT imaging for the 3D morphometric analysis, by compressive loading to find their mechanical parameters, and by X-ray diffraction to quantify the phases via Rietveld refinement for different sintering temperatures and times at the peak temperature. Data were analysed in terms of statistical inference using Pearson’s correlation coefficients. Results: All the studied scaffolds closely mimicked the alveolar organization of the jawbone, independently on the sintering temperatures and times; however, mechanical testing revealed that the group with peak temperature, which lasted for 2 hours at 1250 °C, showed the highest strength both at the ultimate point and at fracture point. Conclusion: The good mechanical performances of the group with peak temperature, which lasted for 2 hours at 1250 °C, is most likely due to the absence of the α-Ca₃(PO₄)₂ phase, as revealed by X-ray diffraction. However, we detected its presence after sintering at the same peak temperature for longer times, showing the time-dependence, combined with the temperature-dependence, of the β-Ca₃(PO₄)₂ to α-Ca₃(PO₄)₂ transition.

Patient-Reported Outcome Measures (PROMs) for Two Implant Placement Techniques in Sinus Region (Bone Graft versus Computer-Aided Implant Surgery): A Randomized Prospective Trial

Purpose: To assess patient-reported outcomes measures (PROMs) for two implant placement techniques in cases of sinus bone atrophy (bone graft surgery (BGS) versus computer-aided implant surgery (CAIS)), after surgery and one year later, and to evaluate the clinical success of both treatments. Methods: Sixty patients with bone atrophy in the posterior maxilla and in need of implant placement were randomly assigned to two groups, and in accordance with the case report form (CRF), 30 were treated with BGS and 30 with CAIS. Immediately after treatment and one year later, PROMs were assessed, and the clinical success of both treatments was evaluated. Results: No significant differences were found between BGS and CAIS with regard to the following: loss of implants (p = 492); patient recommendation (p = 210); duration of surgery (p = 987); pain on the intervention day (p = 512); pain in the week after intervention (p = 299); and complications in the stage of surgery (p = 1.00). Similarly, at one year, no differences were found with regard to the following: pain around implant (p = 481); infection of implants (p = 491); abnormal radiographic imaging (p = 226); occurrence of undesirable events (p = 1.00); loss of one of the implants (p = 1.00); plaque detection (p = 1.00); bleeding on probing (p = 236); and presence of keratinized mucosa (p = 226). However, a significant difference was found among BGS and CAIS with regard to the number of consultations (p = 0001); number of implants placed (p = 033); and treatment difficulty (p = 0369). Significant differences were found for peri-implantitis (p = 0481) and radiology of craterization (p = 020) in clinical examination at the first year. Conclusion: Treatment difficulty and number of consultations were higher for BGS than for CAIS, as well as peri-implantitis and bone craterization at one year, indicating significant differences between the two treatments. However, there were no statistically significant differences between BGS and CAIS regarding the other PROMs, at placement and after one year.

Custom-made 3D printed subperiosteal titanium implants for the prosthetic restoration of the atrophic posterior mandible of elderly patients: a case series

Purpose

To present the application of custom-made 3D-printed subperiosteal implants for fixed prosthetic restoration of the atrophic posterior mandible of elderly patients.

Methods

Between January 2017 and June 2018, all partially edentulous patients aged over 65 years, with two or more missing teeth in the posterior atrophic mandible, and who did not want to undergo bone regenerative procedures, were included in this study. These patients were rehabilitated with custom-made subperiosteal implants, designed from cone beam computed tomography (CBCT) and fabricated in titanium by means of direct metal laser sintering (DMLS). The outcome measures were fit and stability of the implants at placement, duration of the intervention, implant survival, and early and late complications. All patients were followed for 1 year after surgery.

Results

Ten patients (four males, six females; mean age 69.6, SD ± 2.8, median 69, 95% CI 67.9–71.6) were included in the study. The fit of the implants was satisfactory, with a mean rating of 7 out of 10 (SD ± 1.6, median 7, 95% CI 6–8). Only two implants had insufficient fit, because of the presence of scattering in the CBCT; however, they were adapted to the sites during the interventions. The mean duration of the intervention was 44.3 min (SD ± 19.4, median 37, 95% CI 32.3–56.3). At the one-year follow-up, no implants were lost (survival rate 100%). One implant presented immediate postoperative complications with pain, discomfort and swelling, and two patients experienced late complications, having their provisional restorations fractured during the temporisation phase. All these complications were minor in nature, but the final complication rate amounted to 30% (three of ten patients).

Conclusions

Although this study has limits (small patient sample and short follow-up), DMLS has proven to be an effective method for fabricating accurate subperiosteal implants, with high survival rates. This may represent an alternative treatment procedure in elderly patients with a severely atrophic posterior mandible, since it allows avoidance of regenerative bone therapies. Further studies are needed to confirm these outcomes.

Bone formation following sinus grafting with an alloplastic biphasic calcium phosphate in Lanyu Taiwanese mini-pigs

BACKGROUND

To evaluate the new bone formation after grafting with a synthetic biphasic calcium phosphate in sinuses with minimal bone height, the alloplastic and xenograft materials were compared after grafting into Lanyu Taiwanese mini-pig sinuses via split-mouth design.

METHODS

In six mini-pigs, synthetic hydroxyapatite/tricalcium phosphate (HA/TCP) particles were inserted into one of the sinus cavities using the extra-oral approach, where deproteinized bovine bone mineral (DBBM) particles were placed contralaterally. Fluorescent bony labels of Alizarin and Calcein green were delivered at weeks 4 and 8, respectively. Animals were sacrificed at week 12 and the augmented tissues were evaluated by cone-beam computed tomography, microcomputed tomography, and histology.

RESULTS

By radiographic examination, the mean thicknesses of sinus cortexes for DBBM and HA/TCP groups were similar (0.35 versus 0.38 cm) and the mean volumes augmented were also indifferent (1.29 versus 1.64 cm³ ). The distributions of bones, residual particles, and non-mineralized tissues in augmented masses between groups were undistinguishable. Under microscopy, however, macroporosities of osteons were filled with HA/TCP residual particles, whereas the newly formed bones lay on top of DBBM particle surfaces. Although the mineral deposition rates between groups were indifferent, the mean labeled surface in the HA/TCP group was significantly greater than those in the DBBM group at week 4 (35.16% versus 14.00% for HA/TCP and DBBM, respectively) but less than that at week 8 (19.33% versus 39.16%, respectively).

CONCLUSION

Sinus augmentation with synthetic HA/TCP and DBBM exhibited similar effectiveness in new bone formation.

Comparative Study between Laser Light Stereo-Lithography 3D-Printed and Traditionally Sintered Biphasic Calcium Phosphate Scaffolds by an Integrated Morphological, Morphometric and Mechanical Analysis

In dental districts, successful bone regeneration using biphasic calcium phosphate materials was recently explored. The present study aimed to perform a comparative study between 3D-printed scaffolds produced by laser light stereo-lithography (SLA) and traditionally sintered biphasic calcium phosphate scaffolds by an integrated morphological, morphometric and mechanical analysis. Methods: Biphasic calcium phosphate (30% HA/70% β-TCP) samples, produced by SLA-3D-printing or by traditional sintering methods, were tested. The experimental sequence included: (1) Microtomography (microCT) analyses, to serve as control-references for the 3D morphometric analysis; (2) loading tests in continuous mode, with compression up to fracture, to reconstruct their mechanical characteristics; and (3) microCT of the same samples after the loading tests, for the prediction of the morphometric changes induced by compressive loading of the selected materials. All the biomaterials were also studied by complementary scanning electron microscopy to evaluate fracture regions and surfaces. Results: The characterization of the 3D mineralized microarchitecture showed that the SLA-3D-printed biomaterials offer performances comparable to and in some cases better than the traditionally sintered ones, with higher mean thickness of struts and pores. Interestingly, the SLA-3D-printed samples had a higher ultimate strength than the sintered ones, with a smaller plastic region. Moreover, by SEM observation, it was observed that fractures in the SLA-3D-printed samples were localized in the structure nodes or on the external shells of the rods, while all the traditionally sintered samples revealed a ductile fracture surface. Conclusions: The reduction of the region of plastic deformation in the SLA-3D-printed samples with respect to traditionally sintered biomaterials is expected to positively influence, in vivo, the cell adhesion. Both microCT and SEM imaging revealed that the studied biomaterials exhibit a structure more similar to human jaw than the sintered biomaterials.

Comparative Histological and Histomorphometric Results of Six Biomaterials Used in Two-Stage Maxillary Sinus Augmentation Model after 6-Month Healing

Objectives

To evaluate the performances of six different bone substitute materials used as graft in maxillary sinus augmentation by means of histological and histomorphometric analysis of bone biopsies retrieved from human subjects after a 6-month healing period.

Materials and Methods

Six consecutive patients (3 males, 3 females, aged 50-72 years), healthy, nonsmokers, and with good oral hygiene, presenting edentulous posterior maxilla with a residual bone crest measuring ≤ 4 mm in vertical height and 3 to 5 mm in horizontal thickness at radiographic examination, were selected to receive sinus augmentation and delayed implant placement. Under randomized conditions, sinus augmentation procedures were carried out using mineralized solvent-dehydrated bone allograft (MCBA), freeze-dried mineralized bone allograft (FDBA), anorganic bovine bone (ABB), equine-derived bone (EB), synthetic micro-macroporous biphasic calcium-phosphate block consisting of 70% beta-tricalcium phosphate and 30% hydroxyapatite (HA-β-TCP 30/70), or bioapatite-collagen (BC). After 6 months, bone core biopsies were retrieved and 13 implants were placed. Bone samples were processed for histological and histomorphometric analysis. CT scans were taken before and after surgery. After 4 months of healing, patients were restored with a provisional fixed acrylic resin prosthesis, as well as after further 2-4 months with a definitive cemented zirconia or porcelain-fused-to-metal crowns.

Results

There were no postoperative complications or implant failures. The histological examination showed that all biomaterials were in close contact with newly formed bone, surrounding the graft granules with a bridge-like network. No signs of acute inflammation were observed. The histomorphometry revealed 20.1% newly formed bone for MCBA, 32.1% for FDBA, 16.1% for ABB, 22.8% for EB, 20.3% for HA-β-TCP 30/70, and 21.4% for BC.

Conclusions

Within the limitations of the present investigation, all the six tested biomaterials showed good biocompatibility and osteoconductive properties when used in sinus augmentation procedures, although the FDBA seemed to have a better histomorphometric result in terms of newly formed bone and residual graft material. This trial is registered with ClinicalTrials.gov Identifier (Registration Number): NCT03496688.

Custom-Made Direct Metal Laser Sintering Titanium Subperiosteal Implants: A Retrospective Clinical Study on 70 Patients

Purpose

To present a digital technique for the fabrication of custom-made subperiosteal implants and to report on the survival and complication rates encountered when using these fixtures.

Methods

The data used for this retrospective clinical study were derived from the medical records of five different private dental practices. Inclusion criteria were patients over the age of 60, treated with custom-made direct metal laser sintering (DMLS) titanium subperiosteal implants (Eagle-Grid®, BTK, Dueville, Vicenza) during a two-year period (2014-2015) and restored with fixed restorations; all enrolled patients needed to have complete pre- and postoperative clinical and radiographic documentation, with at least 2 years of follow-up. Exclusion criteria were smoking and bruxism. The main outcomes looked at were implant survival and complications.

Results

Seventy patients (39 males and 31 females, aged 62-79 years) who had been treated with custom-made DMLS titanium subperiosteal implants were enrolled in this study. After 2 years of follow-up, three implants were lost due to recurrent, untreatable infections; the survival rate was therefore 95.8% (67/70 implants). Four patients reported pain/discomfort/swelling after implant placement; the incidence of immediate postoperative complications was therefore 5.7% (4/70 implants). During the follow-up period, one patient suffered from recurrent infections classified as a biologic complication; the incidence of biologic complications was therefore 1.4% (1/67 surviving implants). Finally, four patients experienced prosthetic problems with their implant-supported restorations during the provisional phase (fracture of the acrylic restoration) and two patients had ceramic chipping of the definitive restoration; the incidence of prosthetic complications was therefore 8.9% (6/67 surviving implants).

Conclusions

Within the limits of the present study (limited follow-up time and low number of patients treated, retrospective design), the application of custom-made DMLS titanium subperiosteal implants showed satisfactory implant survival (95.8%) and low complication rates. Further studies are needed to confirm the positive outcomes found in this research.

Histological analysis of the use of biphasic ceramics based on hydroxyapatite and β-tricalcium phosphate in maxillary sinus floor elevation surgery: pilot study

Abstract Objective To evaluate the bone repair associated with the use of biphasic ceramics based on hydroxyapatite and β-tricalcium phosphate (HA/TCP) in the procedures of maxillary sinus membrane elevation in human beings. Material and method Ten patients with a residual bone ridge in the posterior maxillary region between 3 mm and 5 mm in height were selected and indicated for procedures of bone grafting associated with maxillary sinus lift procedure. The maxillary sinuses were filled with HA/TCP, and after 8 months, the implants were implanted and a bone biopsy was collected with the aid of a trephine drill, which was then submitted to histological analysis for the evaluation of the composition of the grafted area. Result The histological description analysis of the biopsies revealed the presence of vital and immature bone tissue, juxtaposed to the biomaterial. Histomorphometric analysis showed that the biopsy composition was in average 28.8%, 27.4%, and 43.6% of bone tissue, biomaterial, and soft tissue, respectively. Conclusion The areas grafted with HA/TCP presented the adequate amount of bone formation that allowed the implantation of the implants. The success of the grafting procedure with this biomaterial was associated with its osteoconduction potential that allowed the formation of bone tissue in close contact with HA/TCP.

New bone formation after transcrestal sinus floor elevation was influenced by sinus cavity dimensions: A prospective histologic and histomorphometric study

OBJECTIVE

The aim of this multicenter prospective study was to analyze clinically and histologically the influence of sinus cavity dimensions on new bone formation after transcrestal sinus floor elevation (tSFE).

MATERIAL AND METHODS

Patients needing maxillary sinus augmentation (residual crest height <5 mm) were treated with tSFE using xenogeneic granules. Six months later, bone-core biopsies were retrieved for histological analysis in implant insertion sites. Bucco-palatal sinus width (SW) and contact between graft and bone walls (WGC) were evaluated on cone beam computed tomography, and correlations between histomorphometric and anatomical parameters were quantified by means of forward multiple linear regression analysis.

RESULTS

Fifty consecutive patients were enrolled and underwent tSFE procedures, and forty-four were included in the final analysis. Mean percentage of newly formed bone (NFB) at 6 months was 21.2 ± 16.9%. Multivariate analysis showed a strong negative correlation between SW and NFB (R²  = .793) and a strong positive correlation between WGC and NFB (R²  = .781). Furthermore, when SW was stratified into three groups (<12 mm, 12 to 15 mm, and >15 mm), NFB percentages (36%, 13% and 3%, respectively) resulted significantly different.

CONCLUSIONS

This study represented the first confirmation based on histomorphometric data that NFB after tSFE was strongly influenced by sinus width and occurred consistently only in narrow sinus cavities (SW <12 mm, measured between buccal and palatal walls at 10-mm level, comprising the residual alveolar crest).

Morse Taper Connection Implants Placed in Grafted Sinuses in 65 Patients: A Retrospective Clinical Study with 10 Years of Follow-Up

PURPOSE

To investigate the 10-year survival and complication rates of Morse taper connection implants (MTCIs) placed in grafted sinuses.

METHODS

This study reports on patients treated with maxillary sinus augmentation (with the lateral window technique (LWT) or the transalveolar osteotomy technique (TOT)) and installed with MTCIs supporting fixed restorations (single crowns (SCs) and fixed partial dentures (FPDs)), in two dental clinics. The outcomes of the study were the 10-year implant survival and complication rates.

RESULTS

Sixty-five patients (30 males and 35 females) with a mean age of 62.7 (±10.2) years were installed with 142 MTCIs: 79 fixtures were inserted with the LWT and 63 were placed with the TOT. After ten years, five implants failed, for an overall survival rate of 96.5%. Three implants failed in the LWT group, for a survival rate of 96.3%; two implants failed in the TOT group, for a survival rate of 96.9%. The 10-year incidence of biologic complications was 11.9%. Prosthetic complications were all technical in nature and amounted to 7.6%.

CONCLUSIONS

MTCIs seem to represent a successful procedure for the prosthetic restoration of the grafted posterior maxilla, in the long term. This study was registered in the ISRCTN registry with number ISRCTN30772506.

Comparison between mineralized cancellous bone allograft and an alloplast material for sinus augmentation: A split mouth histomorphometric study

BACKGROUND

Several grafting materials have been used in sinus augmentation procedures including autogenous bone, demineralized freeze-dried bone, hydroxyapatite, β-tricalcium phosphate, anorganic deproteinized bovine bone, and combination of these and others. Yet, the issue of the optimal graft material for sinus floor augmentation is controversial.

PURPOSE

This prospective, randomized split-mouth study was undertaken to histomorphometrically compare a biphasic calcium phosphate (BCP) alloplastic bone substitute and a human bone mineral allograft (freeze-dried bone allograft, FDBA) in patients undergoing bilateral maxillary lateral sinus floor augmentation.

MATERIAL AND METHODS

Apico-coronal core biopsies were harvested at 9 months from 26 bilateral sites in 13 treated patients. Specimens were processed for histological and histomorphometrical analyses.

RESULTS

Newly formed bone (NB) was evident in all specimens with values of 27.5% and 24.0% at the FDBA and BCP sites, respectively (P = .331). The residual graft particle values were 12.5% and 25.4% (P = .001), and the connective tissue values were 60.0% and 50.6%, respectively. The osteoconductive value was 52.6% for the FDBA and 26.7% for the alloplast (P = .001). The values for the measured residual graft particles, connective tissue, and osteoconductivity, but not for NB, showed highly significant differences between the two groups. All sections in the alloplast material showed evidence of a light chronic inflammatory infiltrate, mainly comprising lymphocytes and multinucleated giant cells.

CONCLUSIONS

Both graft materials are suitable for sinus floor augmentation, with the allograft material being more osteoconductive.

Behavior of Osteoblast-Like Cells on a β-Tricalcium Phosphate Synthetic Scaffold Coated With Calcium Phosphate and Magnesium

OBJECTIVES

Tricalcium phosphate (TCP) is one of the most useful synthetic scaffolds for bone grafts and has several advantages. However, the rapid degradation of TCP makes it less osteoconductive than the other candidates, and represents a major shortcoming. To overcome this problem, the authors investigated magnesium (Mg) and/or hydroxyapatite (HA) coating on a β-TCP substrate using a sputtering technique.

METHODS

Biocompatibility tests were carried out on β-TCP discs that were either uncoated (TCP), coated with HA by radio frequency magnetron sputtering (HA-TCP), coated with Mg by DC sputtering (Mg-TCP), or multicoated with Mg and HA by DC and radio frequency magnetron sputtering (MgHA-TCP).

RESULTS

Cells showed similar morphology in all 4 groups, and were widely spread, had flattened elongated shapes, and were connected to adjacent cells by pseudopods. An MTT assay revealed higher cell proliferation on HA-TCP, Mg-TCP, and MgHA-TCP compared with TCP at 3 and 5 days. MgHA-TCP also showed significantly higher alkaline phosphatase activity levels compared with TCP, HA-TCP, and Mg-TCP (P < 0.05).

CONCLUSIONS

Results suggest that Mg-coated β-TCP could have great potential as a bone graft material for future applications in hard tissue regeneration.

Human Adipose-Derived Stem Cells on Rapid Prototyped Three-Dimensional Hydroxyapatite/Beta-Tricalcium Phosphate Scaffold

In the study, we assess a rapid prototyped scaffold composed of 30/70 hydroxyapatite (HA) and beta-tricalcium-phosphate (β-TCP) loaded with human adipose-derived stem cells (hASCs) to determine cell proliferation, differentiation toward osteogenic lineage, adhesion and penetration on/into the scaffold.In this in vitro study, hASCs isolated from fat tissue discarded after plastic surgery were expanded, characterized, and then loaded onto the scaffold. Cells were tested for: viability assay (Alamar Blue at days 3, 7 and Live/Dead at day 32), differentiation index (alkaline phosphatase activity at day 14), scaffold adhesion (standard error of the mean analysis at days 5 and 18), and penetration (ground sections at day 32).All the hASC populations displayed stemness markers and the ability to differentiate toward adipogenic and osteogenic lineages.Cellular vitality increased between 3 and 7 days, and no inhibitory effect by HA/β-TCP was observed. Under osteogenic stimuli, scaffold increased alkaline phosphatase activity of +243% compared with undifferentiated samples. Human adipose-derived stem cells adhered on HA/β-TCP surface through citoplasmatic extensions that occupied the macropores and built networks among them. Human adipose derived stem cells were observed in the core of HA/β-TCP. The current combination of hASCs and HA/β-TCP scaffold provided encouraging results. If authors' data will be confirmed in preclinical models, the present engineering approach could represent an interesting tool in treating large bone defects.

Implant Stability in the Posterior Maxilla: A Controlled Clinical Trial

Aim

To evaluate the primary and secondary stability of implants in the posterior maxilla.

Methods

Patients were allocated into three groups: (A) native bone, (B) partially regenerated bone, and (C) nearly totally regenerated bone. Insertion torque (IT) and implant stability quotient (ISQ) were measured at placement, to evaluate whether satisfactory high primary stability (IT ≥ 45 N/cm; ISQ ≥ 60) was achieved; ISQ was measured 15, 30, 45, and 60 days after placement, to investigate the evolution to secondary stability.

Results

133 implants (Anyridge®, Megagen) were installed in 59 patients: 55 fixtures were placed in Group A, 57 in Group B, and 21 in Group C. Fifty-two implants had satisfactory high primary stability (IT ≥ 45 N/cm; ISQ ≥ 60). A positive correlation was found between all variables (IT, ISQ at t = 0, t = 60), and statistically higher IT and ISQ values were found for implants with satisfactory high primary stability. Significant differences were found for IT and ISQ between the groups (A, B, and C); however, no drops were reported in the median ISQ values during the healing period.

Conclusions

The evaluation of the primary and secondary implant stability may contribute to higher implant survival/success rates in critical areas, such as the regenerated posterior maxilla. The present study is registered in the ISRCTN registry with ID ISRCTN33469250.

Guangxi cobra venom-derived NGF promotes the osteogenic and therapeutic effects of porous BCP ceramic

Neuro-osteological interactions have an important role in the regulation of bone metabolism and regeneration. Neuropeptides combined with porous biphasic calcium phosphates (BCP) using protein adsorption may contribute to the acceleration of bone formation. In the present study, we investigated the effect of BCP combined with nerve growth factor (NGF) on the growth of osteoblasts in vitro and the combinational therapeutic effect on the repair of calvarial defects in vivo. NGF was separated and purified from Chinese cobra venom using a simplified three-step chromatography method. BCP combined with NGF exerted a potent effect on osteoblast differentiation, as evidenced by enhanced cell proliferation, increased ALP activity and the up-regulated expression of osteogenesis-related genes and proteins. Further, combinational therapy with BCP and NGF improved calvarial regeneration, which was superior to treatment with therapy alone, as observed using imageological and morphological examination and histological and immunohistochemical staining. The results confirmed the effect of neuro-osteological interactions through combinatorial treatment with NGF and BCP to promote osteogenesis and bone formation, which may provide an effective and economical strategy for clinical application.

Can stem cells enhance bone formation in the human edentulous alveolar ridge? A systematic review and meta-analysis

Several non-biological materials are currently being used to increase the alveolar bone volume to support dental implants. Recently, stem cell therapy has emerged as a promising biological substitute or adjuvant to enhance bone healing. In order to determine if stem cell therapy has enough clinical evidence to bone ridge augmentation in humans, a systematic review and meta-analysis were conducted. Two independent investigators searched the Entrez PubMed, SCOPUS and Web of Science databases for eligible randomized clinical trials that describe stem cell therapies for alveolar bone formation. The included studies were evaluated for risk of bias. A random-effects meta-analysis model was used to evaluate the percentage of bone formation in the selected studies. Heterogeneity was evaluated using the Cochrane Chi ² and I ². Nine eligible trials were included. These studies presented an overall unclear risk of bias. A comparison between the lower heterogeneity studies and the long term observational outcomes showed a slight tendency to enhance bone formation. High heterogeneity between the included studies was observed. The lack of outcome standardization made a wide-ranging comparison difficult. The application of stem cells in oral surgery and implantology appears to be promising although more standardized study designs, increased samples and long-term observations are needed to strength the clinical evidence that stem cell therapy is effective for alveolar bone formation.

Custom-Made Synthetic Scaffolds for Bone Reconstruction: A Retrospective, Multicenter Clinical Study on 15 Patients

Purpose. To present a computer-assisted-design/computer-assisted-manufacturing (CAD/CAM) technique for the design, fabrication, and clinical application of custom-made synthetic scaffolds, for alveolar ridge augmentation. Methods. The CAD/CAM procedure consisted of (1) virtual planning/design of the custom-made scaffold; (2) milling of the scaffold into the exact size/shape from a preformed synthetic bone block; (3) reconstructive surgery. The main clinical/radiographic outcomes were vertical/horizontal bone gain, any biological complication, and implant survival. Results. Fifteen patients were selected who had been treated with a custom-made synthetic scaffold for ridge augmentation. The scaffolds closely matched the shape of the defects: this reduced the operation time and contributed to good healing. A few patients experienced biological complications, such as pain/swelling (2/15: 13.3%) and exposure of the scaffold (3/15: 20.0%); one of these had infection and complete graft loss. In all other patients, 8 months after reconstruction, a well-integrated newly formed bone was clinically available, and the radiographic evaluation revealed a mean vertical and horizontal bone gain of 2.1 ± 0.9 mm and 3.0 ± 1.0 mm, respectively. Fourteen implants were placed and restored with single crowns. The implant survival rate was 100%. Conclusions. Although positive outcomes have been found with custom-made synthetic scaffolds in alveolar ridge augmentation, further studies are needed to validate this technique.

Alveolar Ridge Reconstruction with Titanium Meshes and Simultaneous Implant Placement: A Retrospective, Multicenter Clinical Study

Objective. To evaluate horizontal bone gain and implant survival and complication rates in patients treated with titanium meshes placed simultaneously with dental implants and fixed over them. Methods. Twenty-five patients treated with 40 implants and simultaneous guided bone regeneration with titanium meshes (i–Gen®, MegaGen, Gyeongbuk, Republic of Korea) were selected for inclusion in the present retrospective multicenter study. Primary outcomes were horizontal bone gain and implant survival; secondary outcomes were biological and prosthetic complications. Results. After the removal of titanium meshes, the CBCT evaluation revealed a mean horizontal bone gain of 3.67 mm (±0.89). The most frequent complications were mild postoperative edema (12/25 patients: 48%) and discomfort after surgery (10/25 patients: 40%); these complications were resolved within one week. Titanium mesh exposure occurred in 6 patients (6/25 : 24%): one of these suffered partial loss of the graft and another experienced complete graft loss and implant failure. An implant survival rate of 97.5% (implant-based) and a peri-implant marginal bone loss of 0.43 mm (±0.15) were recorded after 1 year. Conclusions. The horizontal ridge reconstruction with titanium meshes placed simultaneously with dental implants achieved predictable satisfactory results. Prospective randomized controlled trials on a larger sample of patients are required to validate these positive outcomes.

Increased osteoinductivity and mineralization by minimal concentration of bone morphogenetic protein-2 loaded onto biphasic calcium phosphate in a rabbit sinus

Purpose

The purpose of the present study was to evaluate the effectiveness of a minimal concentration of bone morphogenetic protein-2 (BMP-2) in terms of quantitative and qualitative analyses of newly formed bone in a rabbit maxillary sinus model.

Methods

In 7 rabbits, sinus windows were prepared bilaterally. Biphasic calcium phosphate (BCP) loaded with 0.05 mg/mL BMP-2 was grafted into one sinus (the BMP group) and saline-soaked BCP was placed into the other (the control group) in each animal. The animals were allowed an 8-week healing period before being sacrificed. Specimens including the augmented area and surrounding tissues were then removed and evaluated both radiographically and histologically.

Results

There was a difference in the mineralization of new bone between the groups. In the BMP group, the greater part of the new bone consisted of mature lamellar bone with an evident trabecular pattern, whereas the control group showed mostly woven bone, consisting only partially of lamellar bone. Histometrically, the area of new bone was significantly greater (4.55±1.35 mm² vs. 2.99±0.86 mm²) in the BMP group than in the control group (P<0.05); however, the total augmentation volumes were not significantly different between the groups.

Conclusions

Within the limitations of this study, it can be suggested that a minimal concentration of BMP-2 (0.05 mg/mL) had an osteoinductive effect with accelerated mineralization in a rabbit sinus model using a BCP carrier.

Monophasic ß-TCP vs. biphasic HA/ß-TCP in two-stage sinus floor augmentation procedures - a prospective randomized clinical trial

OBJECTIVES

To compare a monophasic (100% ß-TCP) and a biphasic (60% HA and 40% ß-TCP) bone substitute material (BSM) regarding biocompatibility, osteoconductivity and implant stability using histological, radiological and resonance frequency analysis.

MATERIAL AND METHODS

Sixty-seven sinus floor elevations were performed in 60 patients. One patient group (monophasic bone substitute [MBS], 30 patients, 32 sinuses) was augmented by the use of the monophasic material (Bioresorb^® , Sybron Implant Solutions, Bremen, Germany), while the second group (biphasic bone substitute (BBS), 30 patients, 35 sinuses) received a biphasic material (Maxresorb^® , Botiss Biomaterials, Berlin, Germany). Cone beam CT images were taken immediately after augmentation and prior to implant placement after 6 months. Trephines were harvested, while the implant bed was prepared. Resonance frequency analysis was performed immediately after implant placement and 6 months later. Descriptive analysis was performed on all augmented sinus (n = 67). For statistical comparison of the groups, one sinus of each bilaterally treated patient was randomly excluded, resulting in 30 sinuses grafted with MBS and 30 sinuses grafted with BBS (n = 60).

RESULTS

Histomorphometrical analysis of all sinuses displayed comparable results for both groups regarding new bone matrix (MBS 36.16 ± 19.37%, BBS 38.42 ± 12.61%), residual BSM (MBS 30.26 ± 11.7%, BBS 32.66 ± 12.57%) and non-mineralized tissue (MBS 34.29 ± 18.32%, BBS 28.92 ± 15.04) %) (P > 0.05, respectively). Radiological volume of BBS was significantly more stable (volume loss of 22.2% for MBS, 6.66% for BBS; P < 0.001), and homogeneity of the graft after 6 months was higher for BBS than that for MBS (P < 0.05). Resonance frequency analysis endorsed a higher implant stability quotient for BBS after 6 months than that for MBS (MBS 78.31 ± 5.81, BBS 80.42 ± 6.31; P < 0.05, Mann-Whitney U-test, respectively).

CONCLUSION

Both monophasic and biphasic materials show good biocompatibility and osteoconductivity with satisfactory support on implant stability. BBS remains more stable in terms of volume maintenance and radiological graft homogeneity after a healing period of 6 months.

The Possible Roles of Biological Bone Constructed with Peripheral Blood Derived EPCs and BMSCs in Osteogenesis and Angiogenesis

This study aimed to determine the possible potential of partially deproteinized biologic bone (PDPBB) seeded with bone marrow stromal cells (BMSCs) and endothelial progenitor cells (EPCs) in osteogenesis and angiogenesis. BMSCs and EPCs were isolated, identified, and cocultured in vitro, followed by seeding on the PDPBB. Expression of osteogenesis and vascularization markers was quantified by immunofluorescence (IF) staining, immunohistochemistry (IHC), and quantitive real-time polymerase chain reaction (qRT-PCR). Scanning electron microscope (SEM) was also employed to further evaluate the morphologic alterations of cocultured cells in the biologic bone. Results demonstrated that the coculture system combined with BMSCs and EPCs had significant advantages of (i) upregulating the mRNA expression of VEGF, Osteonectin, Osteopontin, and Collagen Type I and (ii) increasing ALP and OC staining compared to the BMSCs or EPCs only group. Moreover, IHC staining for CD105, CD34, and ZO-1 increased significantly in the implanted PDPBB seeded with coculture system, compared to that of BMSCs or EPCs only, respectively. Summarily, the present data provided evidence that PDPBB seeded with cocultured system possessed favorable cytocompatibility, provided suitable circumstances for different cell growth, and had the potential to provide reconstruction for cases with bone defection by promoting osteogenesis and angiogenesis.

Ridge Preservation Using Composite Alloplastic Materials: A Randomized Control Clinical and Histological Study in Humans

AIM

To evaluate (clinically, histologically, and histo-morphometrically) the use of composite materials (Biphasic calcium sulphate [BCS] with β Tri-Calcium Phosphate (β-TCP) and Hydroxyapatite [HA]) in extraction socket sites and compare it to un-disturbed natural healing.

MATERIAL AND METHODS

Prospective clinical trial of 36 patients (40 extraction sockets) were randomly assigned to either test or control group. Alveolar ridge horizontal dimension was measured in the middle of the socket at crest and 3 and 6 mm subcrestally. Crestal vertical height was measured at baseline surgery and at 4 month re-entry, at which time bone core biopsies were harvested from the center of the edentulous ridge. Histo-morphometric evaluation of the samples was performed using hematoxylin & eosin stains and morphometric software.

RESULTS

The change in horizontal ridge width was higher in the control compared to the experimental group: 2.28 ± 2.36 mm versus 0.03 ± 2.32 mm (p = .007) at -3 mm and 2.28 ± 2.43 versus 0.035 ± 3.05 (p = .02) at -6 mm, for the experimental and control sites, respectively. The vertical distance form bone crest to neighboring horizontal line interconnecting the neighboring teeth was minimal in both groups (0.307 ± 2.01 mm versus 0.14 ± 2.03 mm [p = 0.41]). Residual scaffolds occupied 15.99 ± 11.4% of the volume in the grafted (test) sites while bone area fraction was not statistically different among the groups (47.7 ± 10.6% versus 52.6 ± 11.6%, test versus control, respectively p = .39). The percentage of connective tissue in the control group was significantly higher that test group (36.3 ± 19.4% versus 46.7 ± 10.6% test versus control, respectively, p = .013).

CONCLUSION

Ridge preservation technique using a combination of two synthetic bone grafts β-TCP and HA with BCS resulted in greater stability in the horizontal dimension after 4 months.

Histological and Histomorphometric Human Results of HA-Beta-TCP 30/70 Compared to Three Different Biomaterials in Maxillary Sinus Augmentation at 6 Months: A Preliminary Report

OBJECTIVE

The aim of this investigation was to examine the bone regenerative potential of newly biphasic calcium phosphate ceramics (HA-β-TCP 30/70), by assessing histological and histomorphometric results of human specimens retrieved from sinuses augmented with HA-β-TCP 30/70, and comparing them to anorganic bovine bone (ABB), mineralized solvent-dehydrated bone allograft (MSDBA), and equine bone (EB), after a healing period of 6 months.

MATERIALS AND METHODS

Four consecutive patients with edentulous atrophic posterior maxilla were included in this report. A two-stage procedure was carried out for sinus augmentation with HA-β-TCP 30/70, ABB, MSDBA, and EB. After 6 months, specimens were retrieved at the time of implant placement and processed for histological and histomorphometric analyses.

RESULTS

At histological examination, all biomaterials were in close contact with the newly formed bone and showed the same pattern of bone formation; the grafted granules were surrounded by a bridge-like network of newly formed bone. A limited number of ABB particles were partially covered by connective tissue. The histomorphometric analysis revealed 30.2% newly formed bone for Ha-β-TCP 30/70, 20.1% for ABB, 16.4% for MSDBA, and 21.9% for EB.

CONCLUSIONS

Within the limitations of the present investigation, these results support the successful use of HA-β-TCP 30/70 for sinus augmentation.

Mesenchymal stem cells in maxillary sinus augmentation: A systematic review with meta-analysis

AIM: To investigate the effectiveness of mesenchymal stem cells (MSCs) in maxillary sinus augmentation (MSA), with various scaffold materials.

METHODS: MEDLINE, EMBASE and SCOPUS were searched using keywords such as sinus graft, MSA, maxillary sinus lift, sinus floor elevation, MSC and cell-based, in different combinations. The searches included full text articles written in English, published over a 10-year period (2004-2014). Inclusion criteria were clinical/radiographic and histologic/ histomorphometric studies in humans and animals, on the use of MSCs in MSA. Meta-analysis was performed only for experimental studies (randomized controlled trials and controlled trials) involving MSA, with an outcome measurement of histologic evaluation with histomorphometric analysis reported. Mean and standard deviation values of newly formed bone from each study were used, and weighted mean values were assessed to account for the difference in the number of subjects among the different studies. To compare the results between the test and the control groups, the differences of regenerated bone in mean and 95% confidence intervals were calculated.

RESULTS: Thirty-nine studies (18 animal studies and 21 human studies) published over a 10-year period (between 2004 and 2014) were considered to be eligible for inclusion in the present literature review. These studies demonstrated considerable variation with respect to study type, study design, follow-up, and results. Meta-analysis was performed on 9 studies (7 animal studies and 2 human studies). The weighted mean difference estimate from a random-effect model was 9.5% (95%CI: 3.6%-15.4%), suggesting a positive effect of stem cells on bone regeneration. Heterogeneity was measured by the I² index. The formal test confirmed the presence of substantial heterogeneity (I² = 83%, P < 0.0001). In attempt to explain the substantial heterogeneity observed, we considered a meta-regression model with publication year, support type (animal vs humans) and follow-up length (8 or 12 wk) as covariates. After adding publication year, support type and follow-up length to the meta-regression model, heterogeneity was no longer significant (I² = 33%, P = 0.25).

CONCLUSION: Several studies have demonstrated the potential for cell-based approaches in MSA; further clinical trials are needed to confirm these results.

Custom-Made Computer-Aided-Design/Computer-Aided-Manufacturing Biphasic Calcium-Phosphate Scaffold for Augmentation of an Atrophic Mandibular Anterior Ridge

This report documents the clinical, radiographic, and histologic outcome of a custom-made computer-aided-design/computer-aided-manufactured (CAD/CAM) scaffold used for the alveolar ridge augmentation of a severely atrophic anterior mandible. Computed tomographic (CT) images of an atrophic anterior mandible were acquired and modified into a 3-dimensional (3D) reconstruction model; this was transferred to a CAD program, where a custom-made scaffold was designed. CAM software generated a set of tool-paths for the manufacture of the scaffold on a computer-numerical-control milling machine into the exact shape of the 3D design. A custom-made scaffold was milled from a synthetic micromacroporous biphasic calcium phosphate (BCP) block. The scaffold closely matched the shape of the defect: this helped to reduce the time for the surgery and contributed to good healing. One year later, newly formed and well-integrated bone was clinically available, and two implants (AnyRidge, MegaGen, Gyeongbuk, South Korea) were placed. The histologic samples retrieved from the implant sites revealed compact mature bone undergoing remodelling, marrow spaces, and newly formed trabecular bone surrounded by residual BCP particles. This study demonstrates that custom-made scaffolds can be fabricated by combining CT scans and CAD/CAM techniques. Further studies on a larger sample of patients are needed to confirm these results.

Single-tooth morse taper connection implant placed in grafted site of the anterior maxilla: clinical and radiographic evaluation

The aim of this study was to achieve aesthetically pleasing soft tissue contours in a severely compromised tooth in the anterior region of the maxilla. For a right-maxillary central incisor with localized advanced chronic periodontitis a tooth extraction followed by reconstructive procedures and delayed implant placement was proposed and accepted by the patient. Guided bone regeneration (GBR) technique was employed, with a biphasic calcium-phosphate (BCP) block graft placed in the extraction socket in conjunction with granules of the same material and a resorbable barrier membrane. After 6 months of healing, an implant was installed. The acrylic provisional restoration remained in situ for 3 months and then was substituted with the definitive crown. This ridge reconstruction technique enabled preserving both hard and soft tissues and counteracting vertical and horizontal bone resorption after tooth extraction and allowed for an ideal three-dimensional implant placement. Localized severe alveolar bone resorption of the anterior maxilla associated with chronic periodontal disease can be successfully treated by means of ridge reconstruction with GBR and delayed implant insertion; the placement of an early-loaded, Morse taper connection implant in the grafted site was effective to create an excellent clinical aesthetic result and to maintain it along time.