Retrospective clinical evaluation of 2‐ to 6‐unit implant‐supported fixed partial dentures: Mean follow‐up of 9 years

Clinical and radiographic outcomes of implant-supported fixed prostheses with cantilever extension in anterior mandible: A retrospective study

OBJECTIVES

The objective of this study is to analyze the clinical and radiographic outcomes of implant-supported fixed protheses with cantilever extensions (ISFPCs) in the partially edentulous anterior mandible.

MATERIALS AND METHODS

Patients who received anterior mandible implant restoration between January 2016 and December 2021 were included. Patients with two, three, or four continuous missing teeth receiving adjacent implant supported single-unit crowns (ISSCs), ISFPCs, implant-supported fixed protheses without cantilever extensions (ISFPNs) were divided into groups: ISSC+ISSC, ISFPC, ISSC+ISFPC, three-unit ISFPN, ISFPC+ISFPC, or four-unit ISFPN, respectively. We recorded and evaluated survival rates, mechanical and biological complications, peri-implant marginal bone loss (MBL), esthetic outcomes, and patient perceptions. Statistical analysis was performed using linear mixed models (LMM).

RESULTS

The study included 87 patients and 152 implants. No implant loss occurred during an average follow-up of 3.48 ± 1.85 years (range: 1-7 years). According to LMM models, prosthetic type had a statistically significant impact on MBL during follow-up periods, in favor of the ISFPC and ISFPC+ISFPC groups (0.16 ± 0.48 mm vs. 0.51 ± 0.49 mm, p = .034; 0.22 ± 0.49 mm vs. 0.60 ± 0.62 mm, p = .043, respectively). Mechanical and biological complications were relatively low and comparable. The four-unit ISFPC group had higher subjective esthetic scores compared with the ISSC+ISSC group (98.6 vs. 83.8, p < .05), and patients in the ISFPC+ISFPC group expressed greater satisfaction with cleanability than the ISFPN group (98.8 vs. 80.6).

CONCLUSION

ISFPCs offer a highly predictable treatment option in the anterior mandible, characterized by high survival rates, and comparable complication rates, peri-implant bone stability and esthetics to adjacent ISSCs or ISFPNs.

Screw-retained ceramic-veneered/monolithic zirconia partial implant-supported fixed dental prostheses: A 5 to 10-year retrospective study on survival and complications

PURPOSE

To assess the clinical performance of screw-retained, ceramic-veneered, monolithic zirconia partial implant-supported fixed dental prostheses (ISFDP) over 5-10 years and to evaluate implant- and prosthesis-related factors influencing treatment failure and complications.

MATERIALS AND METHODS

Partially edentulous patients treated with screw-retained all-ceramic ISFDPs with 2-4 prosthetic units with a documented follow-up of ≥5 years after implant loading were included in this retrospective study. The outcomes analyzed included implant/prosthesis failure and biological/technical complications. Possible risk factors were identified using the mixed effects Cox regression analysis.

RESULTS

A screened sample of 171 participants with 208 prostheses (95% of the restorations were splinted crowns without a pontic) supported by 451 dental implants were enrolled in this study. The mean follow-up duration after prosthesis delivery was 82.4 ±17.2 months. By the end of the follow-up period, 431 (95.57%) of the 451 implants remained functional at the implant level. At the prosthesis level, 185 (88.94%) of the 208 partial ISFDPs remained functional. Biological complications were observed in 67 implants (14.86%), and technical complications were observed in 62 ISFDPs (29.81%). Analysis revealed only emergence profiles (over-contoured) as a significant risk factor for implant failure (P<0.001) and biological complications (P<0.001). Full-coverage ceramic-veneered zirconia prostheses had a significantly greater chance of chipping (P<0.001) compared with buccal-ceramic-veneered or monolithic zirconia prostheses.

CONCLUSIONS

Screw-retained ceramic-veneered, monolithic partial ISFDPs have a favorable long-term survival rate. Over-contoured emergence profile is a significant risk factor associated with implant failure and biological complications. Buccal-ceramic-veneered and monolithic zirconia partial ISFDPs lower the initial prevalence of chipping compared with a full-coverage veneered design.

Initial damage and failure load of zirconia-ceramic and metal-ceramic posterior cantilever fixed partial dentures

OBJECTIVES

The aim of this study was to compare failure load and initial damage in monolithic, partially veneered, and completely veneered (translucent) zirconia cantilevered fixed partial dentures (CFPDs), as well as completely veneered metal-ceramic CFPDs under different support and loading configurations.

MATERIALS AND METHODS

Eight test groups with anatomically congruent CFPDs (n = 8/group) were fabricated, differing in CFPD material/support structure/loading direction (load applied via steel ball (Ø 6 mm) 3 mm from the distal end of the pontic for axial loading with a 2-point contact on the inner cusp ridges of the buccal and oral cusps and 1.3 mm below the oral cusp tip for 30° oblique loading): (1) monolithic zirconia/CoCr abutment teeth/axial, (2) monolithic zirconia/CoCr abutment teeth/oblique, (3) partially veneered zirconia/CoCr abutment teeth/axial, (4) partially veneered zirconia/CoCr abutment teeth/oblique, (5) completely veneered zirconia/CoCr abutment teeth/axial, (6) completely veneered CoCr/CoCr abutment teeth/axial (control group), (7) partially veneered zirconia/implants/axial, and (8) partially veneered zirconia/natural teeth/axial. Restorations were artificially aged before failure testing. Statistical analysis was conducted using one-way ANOVA and Tukey post hoc tests.

RESULTS

Mean failure loads ranged from 392 N (group 8) to 1181 N (group 1). Axially loaded monolithic zirconia CFPDs (group 1) and controls (group 6) showed significantly higher failure loads. Oblique loading significantly reduced failure loads for monolithic zirconia CFPDs (group 2). Initial damage was observed in all groups except monolithic zirconia groups, and fractography revealed design flaws (sharp edges at the occlusal boundary of the veneering window) in partially veneered zirconia CFPDs.

CONCLUSIONS

Monolithic zirconia CFPDs might be a viable alternative to completely veneered CoCr CFPDs in terms of fracture load. However, oblique loading of monolithic zirconia CFPDs should be avoided in clinical scenarios. Design improvements are required for partially veneered zirconia CFPDs to enhance their load-bearing capacity.

CLINICAL RELEVANCE

Monolithic zirconia may represent a viable all-ceramic alternative to the established metal-ceramic option for CFPD fabrication. However, in daily clinical practice, careful occlusal adjustment and regular monitoring should ensure that oblique loading of the cantilever is avoided.

Bruxism and dental implants: A systematic review and meta-analysis

BACKGROUND

Overload from bruxism may affect survival of dental implants.

OBJECTIVES

To evaluate implant failure and marginal bone loss (MBL) in patients presenting with probable bruxism compared to non-bruxers. The study was registered in PROSPERO (CRD42021238397).

METHODS

An electronic search September 2022 in PubMed/Medline, Web of Science and Science Direct was combined with a hand search. Two independent reviewers carried out abstract screening, full-text assessment, quality assessment (National Institutes of Health tool) and data extraction. Only studies that provided information on self-report and clinical examination needed for the diagnosis of at least 'probable' bruxism were included. A pairwise random-effect meta-analysis was carried out.

RESULTS

In total 1338 studies were identified, and after screening and full-text assessment 27 studies that presented data on 2105 implants in probable bruxers and 10 264 implants in non-bruxers were included, with 138 and 352 implant failures in respective groups. the meta-analysis showed that implants placed in probable bruxers had a higher risk of failure than in non-bruxers (OR 2.189; 95% CI 1.337, 3.583, p = .002). A meta-regression showed that follow-up time did not affect this OR. Eighteen studies provided general data on MBL but did not report results separated between bruxers and non-bruxers. Therefore, an analysis of MBL was not possible.

CONCLUSION

The results of the present systematic review show that implants placed in probable bruxers present a significantly higher risk of failure than implants placed in non-bruxers. This should be considered in treatment planning and management of implant patients.

Difference in marginal bone loss around implants between short implant-supported partial fixed prostheses with and without cantilever: a retrospective clinical study

PURPOSE

To investigate the influence of cantilever prosthetic arm on the marginal bone loss (MBL) over time around dental implants supporting short fixed partial dentures (FPDs), in a record-based retrospective study.

METHODS

All cases of 3-unit implant-supported FPDs, supported by 2-3 implants, from the database of cases treated at one specialist clinic were considered for inclusion. Only implants with a minimum of 36 months of radiological follow-up were considered. Univariate linear regression models were used to compare MBL over time between 12 clinical covariates, after which a linear mixed-effects model was built.

RESULTS

One-hundred-thirty-nine patients (64 men, 75 women) with 164 3-unit implant-supported FPDs (333 implants supporting non-cantilevered FPDs, 94 supporting cantilevered FPDs) were included in the study. The patients were followed up clinically and radiographically for a mean of 154.1 ± 78.0 (min-max, 37.3-364.6) and 132.9 ± 77.3 months (min-max, 36.8-329.9), respectively. The total number of marginal bone level double measurements (mesial and distal sides of each implant) was 2909. FPDs with cantilever presented an estimated greater MBL over time compared to FPDs without cantilever. Bruxism, sex (women), implant (modified) surface, and (poor) bone quality were also associated with higher MBL over time.

CONCLUSIONS

The use of a cantilever extension is suggested to negatively affect the bone marginal level over time around implants supporting 3-unit FPDs. Due to the small difference of the estimated MBL over long periods of follow-up between the groups, it is a matter of debate if the observed negative effect may be of clinical significance.

Prosthetic complications and failures of implant-supported fixed partial dentures: A scoping review

STATEMENT OF PROBLEM

Although high survival rates of implant-supported fixed partial dentures (ISFPDs) have been reported, evidence for complications, failures, and factors that interfere with their longevity is lacking.

PURPOSE

The purpose of this scoping review was to review the literature to investigate the most common failures and complications of ISFPDs.

MATERIAL AND METHODS

This review followed the preferred reporting items for systematic reviews and meta-analyses scoping review (PRISMA ScR) guidelines, and the methodology was registered on the open science framework (osf.io/5xqkp). An electronic search was conducted in PubMed/MEDLINE, Embase, Cochrane Library, Scopus, and Web of Science databases and nonpeer-reviewed literature for articles published from 2013 to January 2023. Studies that evaluated the clinical performance of ISFPDs with at least 1 year of follow-up and described the concepts of failure and success were included.

RESULTS

The search yielded 5695 studies. Fourteen articles were included in this review for data extraction. Veneering porcelain fracture, screw fracture, and implant loss were the most common failures reported. Technical complications mainly involved screw loosening, loss of retention, and wear of the screw-access restoration.

CONCLUSIONS

Bruxism, mismatch of the thermal expansion coefficient, unsatisfactory support of the framework, choice of cement, shape of the titanium abutments, and extended length of the cantilever were associated with the longevity of the ISFPD. Despite the high survival rate of ISFPDs, data must be carefully interpreted because of the variation in the materials used to manufacture the ISFPD and the heterogeneity of the studies in this review.

Marginal bone loss around dental implants: comparison between diabetic and non-diabetic patients-a retrospective clinical study

OBJECTIVES

The aim of the present retrospective study was to compare the marginal bone loss (MBL) around dental implants in a group of diabetic patients in relation to a matched group of non-diabetic patients.

MATERIALS AND METHODS

The present dental record-based retrospective study included patients selected from individuals treated with dental implants at one specialist clinic in Malmö, Sweden. Patients were excluded if they had history of periodontitis and/or were treated for periodontal disease. The study group included 710 implants installed in 180 patients (mean age 60.3±13.0 years), 349 implants in 90 diabetic (21 T1DM and 69 T2DM patients), and 361 implants in 90 non-diabetic patients.

RESULTS

The results suggested that jaw (greater MBL in the maxilla), diabetes (greater MBL for diabetic patients, and worse for T1DM patients), bruxism (greater MBL for bruxers), and smoking (greater MBL for smokers and former smokers) had a statistically significant influence on MBL over time.

CONCLUSIONS

Patients with diabetes have an estimated greater MBL over time compared to non-diabetic patients. The difference was greater in patients with diabetes type 1 compared to patients with diabetes type 2. Bruxism, smoking, and implant location (maxilla) were also associated with a higher loss of marginal bone around implants over time.

CLINICAL RELEVANCE

Awareness of the possible influence of diabetes on the long-term outcomes of dental implant treatment is important, in order to be able to minimize the possibility of a high MBL with time, which can eventually lead to the loss of the implant.

Influence of Crown-Implant Ratio and Implant Inclination on Marginal Bone Loss around Dental Implants Supporting Single Crowns in the Posterior Region: A Retrospective Clinical Study

The aim of this present record-based retrospective study was to investigate the influence of the crown-implant ratio (CIR) and implant inclination in relation to the occlusal plane on the marginal bone loss (MBL) around dental implants supporting single crowns in the posterior region of the jaws. All the cases of implant-supported single crowns in the premolar and molar regions were initially considered for inclusion. Only implants not lost, with baseline radiographs taken within 12 months after implant placement and with a minimum of 36 months of radiological follow-up, were considered for the analysis of MBL. Univariate linear regression models were used to compare MBL over time between 12 clinical covariates, after which a linear mixed-effects model was built. After the exclusion of 49 cases, a total of 316 implant-supported single crowns in 234 patients were included. The results from the statistical models suggested that implant inclination and anatomical- and clinical CIR (the main related factors investigated in the study) were not statistically significantly related to MBL over time. Age (older people), tooth region (premolar), and bruxism (bruxers) had a statistically significant influence on MBL over time.

Marginal bone loss around dental implants: comparison between matched groups of bruxer and non-bruxer patients: A retrospective case-control study

PURPOSE

To compare marginal bone loss (MBL) around dental implants in a group of bruxers in relation to a matched group of non-bruxers.

METHODS

The present record-based retrospective study included patients selected from individuals treated with dental implants at one specialist clinic in Malmö. Only implants not lost and with baseline radiographs taken within 12 months after implant placement and with a minimum of 36 months of radiological follow-up were considered for inclusion. Univariate linear regression models and a linear mixed-effects model were performed.

RESULTS

Two hundred and four patients (104 bruxers, 100 non-bruxers), with a total of 811 implants (416 in bruxers, 395 in non-bruxers) were included in the study. The results of the linear mixed-effects model suggested that bruxism, smoking, age, region of the jaws, implant diameter, and prosthesis type had a statistically significant influence on MBL over time. Individuals who are both bruxers and smokers showed greater MBL when compared to individuals who are either a bruxer or smoker, or neither (p < 0.001).

CONCLUSIONS

Bruxism is suggested to increase the risk of MBL over time, as well as higher age, smoking, and the combination of bruxism and smoking. Other factors that showed a correlation with increased MBL were implant diameter, region of the jaws, and prosthesis type, but it is not possible to draw robust conclusions for these factors, as the categories of these variables were very unbalanced.

Long-term survival and success of zirconia screw-retained implant-supported prostheses for up to 12 years: A retrospective multicenter study

STATEMENT OF PROBLEM

Despite the broad clinical application of zirconia for fixed implant-supported prostheses, evidence of long-term performance is sparse.

PURPOSE

The purpose of this retrospective study was to evaluate the long-term clinical and radiographic outcomes of zirconia-based partial and complete screw-retained implant-supported zirconia fixed dental prostheses (ISZFDPs).

MATERIAL AND METHODS

Records of patients treated with dental implants and ISZFDPs between December 2004 and June 2017 were screened. Eligible study participants, according to inclusion criteria, were contacted and invited to undergo clinical and radiographic examinations. Outcomes were evaluated as implant and prosthetic survival rates, prosthetic success rate, complications, marginal bone level (MBL) change, and soft tissue condition. Along with the effects of zirconia prosthesis type and level, the effects of implant type and connection, type of loading, and follow-up on MBL were tested with a generalized linear effects model (GLEM) (α=.05).

RESULTS

A total of 118 patients were identified, of whom 20 (16.9%) were not available for clinical examination for various reasons. Ninety-eight participants (mean age 60.7 ±11.7 years) with 337 implants were included, of which 176 (52.2%) had been immediately loaded. A total of 111 ISZFDPs (96 zirconia connection and 15 titanium base) were investigated: 24 complete ISZFDPs with a zirconia connection (12.9 ±0.97 dental units, minimum 12, maximum 14), 72 partial with a zirconia connection (3.11 ±1.12, minimum 2, maximum 7), 15 partial with a titanium base (3.62 ±1.02, minimum 2, maximum 5). Forty ISZFDPs had been in function for ≥10 years (36%), 38 for 5 to 9 years (34.2%), and 33 for 2 to 4 years (22.8%). The mean follow-up time was 7.2 ±3.4 years. No zirconia fractures were identified. Two implants and 2 ISZFDPs failed, with chipping being the most common complication (13.5%). The implant survival rate was 99.4%, and the prosthetic survival rate was 98.2%. The cumulative prosthetic success rate was 91.9%. MBL change was -0.18 ±0.59 mm. Thirteen implants were treated for peri-implantitis (3.8%), and 9 for mucositis (2.7%), but presented healthy peri-implant soft tissues at the follow-up examination. A significant difference was found between the implant-level and abutment-level prostheses (P=.013), with less marginal bone loss observed in ISZFDPs delivered at the implant level.

CONCLUSIONS

Zirconia-based screw-retained implant-supported prosthesis can be considered a reliable long-term treatment option for partial and complete edentulism. No zirconia fractures were experienced. Stable bone levels and low peri-implantitis rates were reported regardless of the ISZFDP type and level, implant type and connection, and type of loading.

Current Protocols for Resin-Bonded Dental Ceramics

Resin-bonded ceramic restorations are common treatment options. Clinical longevity of resin-bonded ceramic restorations depends on the quality and durability of the resin-ceramic bond. The type and composition of the specific ceramic determines the selection of the most effective bonding protocol. Such protocol typically includes a surface pretreatment step followed by application of a priming agent. Understanding of fundamental ceramic properties and chemical compositions enables the clinician to make proper material selection decisions for clinically successful and long-lasting restorations. Based on research accrued over the past decades, this article reviews and discusses current resin-bonding protocols to most commonly used dental ceramics.

Abutment mechanical complications of a Morse taper connection implant system: A 1- to 9-year retrospective study

BACKGROUND

The fracture of a Morse tapered abutment connection in an osseointegrated implant is one of the most serious mechanical complications, and it is extremely hard to deal with this complication in clinical practice.

PURPOSE

The aim of this study was to explore the cumulative mechanical complications focus on abutment of a platform switching Morse taper connection implant system after loading, and to perform a retrospective, approximately 1- to 9-year follow-up study to identify the predisposing factors.

MATERIALS AND METHODS

A total of 495 patients with 945 fitted implants were enrolled in this study with a follow-up from January 2012 to January 2020. The data of mechanical complications of the abutment, including abutment fracture (AF) and abutment screw loosening (ASL), and possible causative factors were extracted and evaluated statistically.

RESULTS

A total of 25 out of 945 (2.65%) cumulative abutment mechanical complications occurred. AF was the most common complication (n = 13, 1.38%), followed by ASL (n = 12, 1.27%). For AF, gender, type of prosthesis, abutment design, and implant diameter were identified as the causative factors. AF was mostly observed in the single crown of males in molar areas, while ASL was more likely to occur on an angled abutment than on a non-angled abutment. Moreover, the abutment with the positioning index (/X) had a higher incidence of fracture than the abutment without the positioning index (C/).

CONCLUSIONS

This study shows that the Morse taper connection is a safe abutment connection. AF occurs more frequently within single crowns in molar area of males, especially with the positioning index (/X), while ASL is more likely to occur in an angled abutment.

Smoking and Dental Implants: A Systematic Review and Meta-Analysis

Background and Objectives: Tobacco is today the single most preventable cause of death, being associated with countless diseases, including cancer and neurological, cardiovascular, and respiratory diseases. Smoking also brings negative consequences to oral health, potentially impairing treatment with dental implants. The present review aimed to evaluate the influence of smoking on dental implant failure rates and marginal bone loss (MBL). Materials and Methods: Electronic search was undertaken in three databases, plus a manual search of journals. Meta-analyses were performed, in addition to meta-regressions, in order to verify how the odds ratio (OR) and MBL were associated with follow-up time. Results: The review included 292 publications. Altogether, there were 35,511 and 114,597 implants placed in smokers and in non-smokers, respectively. Pairwise meta-analysis showed that implants in smokers had a higher failure risk in comparison with non-smokers (OR 2.402, p < 0.001). The difference in implant failure between the groups was statistically significant in the maxilla (OR 2.910, p < 0.001), as well as in the mandible (OR 2.866, p < 0.001). The MBL mean difference (MD) between the groups was 0.580 mm (p < 0.001). There was an estimated decrease of 0.001 in OR (p = 0.566) and increase of 0.004 mm (p = 0.279) in the MBL MD between groups for every additional month of follow-up, although without statistical significance. Therefore, there was no clear influence of the follow-up on the effect size (OR) and on MBL MD between groups. Conclusions: Implants placed in smokers present a 140.2% higher risk of failure than implants placed in non-smokers.

Dental Implants Inserted in Fresh Extraction Sockets versus Healed Sites: A Systematic Review and Meta-Analysis

The present review aimed to evaluate the difference of dental implant failure rates and marginal bone loss (MBL) between implants inserted in fresh extraction sockets or healed sites. Electronic search was undertaken in three databases, plus manual search of journals, including studies randomized or not. Meta-analyses were performed besides meta-regressions, in order to verify how the odds ratio (OR) and MBL were associated with follow-up time. The review included 163 publications. Altogether, there were 17,278 and 38,738 implants placed in fresh extraction sockets and healed sites, respectively. Pairwise meta-analyses showed that implants in sockets had a higher failure risk in comparison to healed sites: OR 1.349, all studies included; OR 2.070, only prospective non-RCTs; OR 2.487, only RCTs (all p < 0.001). The difference in implant failure between the groups was statistically significant in the maxilla (OR 1.616, p = 0.029), but not in the mandible (OR 2.192, p = 0.075). The MBL mean difference (MD) between the groups was −0.053 mm (p = 0.089). There was an estimated decrease of 0.003 in OR (p = 0.284) and an increase of 0.006 mm (p = 0.036) in the MBL MD between groups for every additional month of follow-up. In conclusion, implants placed in fresh extraction sockets present higher risk of failure than implants placed in healed sites.

Bond strength of zirconia- or polymer-based copings cemented on implant-supported titanium bases - an in vitro study

Purpose

To evaluate the bond strength between polymer-based copings and zirconia copings as positive control, cemented on implant-supported titanium bases with different adhesive cement systems. Moreover, to evaluate if airborne-particle abrasion of polymethylmetacrylate (PMMA) would enhance the bond strength.

Methods

Four groups of different materials were used to fabricate the copings, 30 in each group: airborne-particle abraded milled zirconia (TAZirconia, control group), milled PMMA (TPMMA), airborne-particle abraded milled PMMA (TAPMMA) and 3 D-printed micro filled hybrid resin (TAMFH). Each group of copings was cemented on titanium bases by three different adhesive cement systems, 10 each: Multilink Hybrid Abutment, Panavia V5, RelyX Ultimate. The specimens were stored dry at room temperature for 24 h, subjected to thermocycling for 5000 cycles followed by evaluating the bond strength by tensile strength test.

Results

TPMMA and TAPMMA cemented with Multilink Hybrid Abutment showed statistically significant lower bond strength in comparison to TAZirconia and TAMFH. No difference was observed between the latter two. TPMMA, TAPMMA and TAMFH had a statistically significant lower bond strength compared to the control group when cemented with Panavia V5. TPMMA and TAPMMA cemented with Rely X Ultimate showed statistically significant lower bond strength in comparison to the control group.

Conclusion

Almost all experimental groups, except 3 D-printed MFH, performed inferior than the positive control group where the highest bond strength was reported for the cementation of zirconia copings cemented with Panavia V5 or Rely X Ultimate. Airborne-particle abrasion did not improve the bond strength of the PMMA, except when Multilink Hybrid Abutment was used.

Cost-utility analysis of an implant treatment in dentistry

Background

When dealing with the replacement of one missing tooth, the patient has the option of choosing between different types of treatment interventions. Several important factors play a role in his decision-making process, including his limited financial means and his efforts to solve the problem of missing teeth as effectively as possible. The main goal of the study is the economic-clinical evaluation of implant treatment, as a surgical-prosthetic method in dentistry, in case of replacement of one missing tooth of the molar area.

Methods

Cost-utility analysis from the patient's perspective is used for evaluation. The selected comparator is a purely prosthetic solution with the help of a three-unit fixed dental prosthesis. Cost-utility analysis is modelled using Markov models, which consider a 30-year time horizon.

Results

Based on the results of modelling, the intervention evaluated by the patient, i.e. treatment with the help of implant-supported single crown, brings exactly 15.31 quality-adjusted prosthesis years (QAPY) after 30 years. The value of incremental cost-utility ratio amounted to USD − 1434.

Conclusion

The results of the cost-utility analysis suggest that implant treatment with an implant-supported single crown is more cost-effective than treatment with the three-unit fixed dental prosthesis.

A Randomized Clinical Trial Comparing Immediate Loading and Delayed Loading of Single-Tooth Implants: 5-Year Results

The aim of this prospective randomized clinical study was to compare the clinical treatment outcome for single dental implants submitted to either immediate loading (IL) or delayed loading (DL) after 5 years of follow-up. Fifty patients with a missing maxillary tooth (15–25) were randomly allocated to either the IL or DL. The treatment procedures included implant installation in healed sites, temporary screw-retained crown and replacement with a permanent single implant crown. The two groups were evaluated with regard to implant survival, marginal bone level, papillae index, pink and white esthetic score (PES, WES). At the 5-year follow-up the implant survival rate was 100% and 95.8% for IL and DL, respectively. Implant success rate was 91.7% and 83.3% for IL and DL, respectively. The mean ± SD marginal bone loss for IL and DL was −0.50 ± 0.73 mm and −0.54 ± 0.65 mm, respectively. (p = 0.782). Statistically significant less marginal bone loss was found non-smokers (p = 0.021). No statistically significant differences were found for IL and DL concerning papillae index PES and WES after 5 years. This study suggests that implant-supported single crowns in the maxillary aesthetic zone can present similar results with respect to either IL or DL after 5 years.

Long-Term Survival and Complication Rates of Porcelain Laminate Veneers in Clinical Studies: A Systematic Review

The presented study aimed to assess the survival rate of porcelain laminate veneers (PLV) based on a systematic review of the literature. An electronic search was last updated in February 2021. Eligibility criteria included clinical series of patients rehabilitated with PLVs published in the last 25 years, with a minimum follow-up of 3 years. Survival analysis methods were applied. Twenty-five studies were included, with 6500 PLVs. The 10-year estimated cumulative survival rate (CSR) of PLVs was 95.5%. The 10-year CSR of PLVs when fracture, debonding, occurrence of secondary caries, and need of endodontic treatment were considered as isolated reasons for failure were 96.3%, 99.2%, 99.3%, and 99.0%, respectively. PLVs without incisal coverage had a higher failure rate than PLVs with incisal coverage. Non-feldspathic PLVs performed better than feldspathic PLVs. As a conclusion, the 10-year CSR of PLVs was 95.5%, when fracture, debonding, occurrence of secondary caries, and need of endodontic treatment were considered as reasons for restoration failure. Fracture seems to be most common complication of PLVs, followed by debonding, with both more commonly happening within the first years after PLV cementation. PLVs with incisal coverage and non-feldspathic PLVs presented lower failure rates than PLVs without incisal coverage and feldspathic PLVs.

Analysis of technical complications and risk factors for failure of combined tooth-implant-supported fixed dental prostheses

BACKGROUND

The oral rehabilitation with fixed restorations supported by the combination of teeth and dental implants has been advocated in some cases.

PURPOSE

To assess the clinical outcomes of these prostheses. Fixed restorations supported by the combination of teeth and dental implants.

MATERIALS AND METHODS

This retrospective study included all patients treated with combined tooth-implant-supported fixed dental prostheses (FDPs) at one specialist clinic. Abutment/prosthesis failure and technical complications were the outcomes analyzed.

RESULTS

A total of 85 patients with 96 prostheses were included, with a mean follow-up of 10.5 years. Twenty prostheses failed. The estimated cumulative survival rate was 90.7%, 84.8%, 69.9%, and 66.2% at 5, 10, 15, and 20 years, respectively. The failure of tooth and/or implant abutments in key positions affected the survival of the prostheses. There were seven reasons for prostheses failure, with the loss of abutments exerting a significant influence. Bruxism was possibly associated with failures. Prostheses with cantilevers did not show a statistically significant higher failure rate. No group had a general higher prevalence of technical complications in comparison to the other groups.

CONCLUSIONS

Although combined tooth-implant-supported FDPs are an alternative treatment option, this study has found that across 20 years of service nearly 35% the prostheses may fail.