Guided Endodontics: a novel treatment approach for teeth with pulp canal calcification and apical pathology

Advancements in guided surgical endodontics: A scoping review of case report and case series and research implications

This scoping review examined current case series and reports on guided surgical endodontic applications in order to provide a critical platform for future research. Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) extension for scoping reviews guidelines were followed. A search on PubMed and Scopus yielded 611 articles, with 17 case reports and 1 series meeting inclusion criteria. Overall, guided surgery addressed anatomical complexities, with 15 articles employing static protocols and 3 dynamic. Results showed minimal iatrogenic errors and reduced chair time, with no postoperative issues reported. Within the cases described, guided endodontic surgery exhibited satisfactory results in management of anatomical complex cases. Cost-effectiveness, the need for adequate follow-up, procedure's reproducibility and accuracy, and objective measurement of the reduction in operative times and iatrogenic errors are some of the limitations in the current reports that need to be considered for planning of future experimental and cohort studies.

Does dynamic navigation system preserve more dentine? - A systematic review

OBJECTIVE

This systematic review aims to comparatively analyse the amount of dentin removal by free hand and static guided endodontics with dynamic navigation system (DNS) in endodontic access cavity preparation.

METHODS

The systematic review was conducted according to Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) 2020 guidelines. Based on the structured PICO framework of "Comparative evaluation of dynamic navigation system (I) to freehand (C) and static guided endodontics (C) in endodontic access cavity preparation on the preservation of tooth structure (O) when assessed on permanent human teeth (P)", the keywords were formulated and the articles were retrieved from three databases namely PubMed, Scopus and Embase, based on the keywords from the time of inception of DNS till June 2023. The risk of bias assessment was done using a modified Joanne Briggs Institute checklist, which evaluated domains such as randomisation, sample size, image acquisition using CBCT, angulation, accuracy and time taken. As the data was heterogenous, a quantitative meta-analysis was not performed.

RESULTS

Initially, 174 articles were retrieved from the three databases, 30 duplicates were removed, after title check 108 articles were excluded and following abstract check only 10 articles qualified for full text analysis. On reviewing the 10 full text articles, 5 articles were excluded and the remaining 5 articles were subjected to the risk of bias analysis which showed that 2 articles displayed low risk of bias and three articles showed high risk of bias. The RoB analysis revealed that only 2 studies evaluated the preservation of dentin in terms of accuracy, angulation and time taken proving the increased precision with minimal loss of tooth structure using DNS. In both the studies, DNS proved to be superior to free hand technique in terms of precision, accuracy and efficiency in locating the canals during access cavity preparation with maximal preservation of tooth structure.

CONCLUSION

With the minimal literature evidences, the present systematic review highlights maximal preservation of dentin using DNS. However, further invitro and invivo studies comparing the free hand, static guided endodontics to DNS must be carried out for its translation into clinical practice.

CLINICAL SIGNIFICANCE

Dynamic navigation system provides maximal preservation of dentin during access cavity preparation.

Comparison of Accuracy and Operation Time in Robotic, Dynamic, and Static-Assisted Endodontic Microsurgery: An In Vitro Study

INTRODUCTION

This study aimed to compare the accuracy and operation time (OT) of robotic-assisted endodontic microsurgery (RA-EMS), dynamic navigation-guided (DN-guided) EMS, and static navigation-guided (SN-guided) EMS.

METHODS

Seventy-two teeth from three sets of standardized jaw models (TrueTooth, DELendo, Santa Barbara, CA) randomly assigned into 3 groups underwent osteotomy and root-end resection. Preoperative plans and postoperative cone-beam computed tomography images were imported into an accuracy analysis system and aligned based on the anatomical structures to assess accuracy. The OT was recorded from the moment the foot pedal was pressed down until the bur reached the target depth. Statistical analyses were conducted using Kruskal-Wallis and Scheirer-Ray-Hare tests, with significance set at P < .05.

RESULTS

RA-EMS exhibited significantly higher accuracy than DN- and SN-guided EMS in terms of platform, angular, and resection angular deviations (P < .05). Additionally, RA-EMS exhibited significantly higher accuracy than DN-guided EMS in resection length deviation (P < .05). Significant differences were also observed in OTs between the 3 approaches, with SN-guided EMS showing the shortest OT, followed by RA-EMS and DN-guided EMS. Differences in jaw types within the DN-guided EMS group were observed in terms of angular deviation (P < .05).

CONCLUSIONS

All 3 treatment approaches demonstrated acceptable clinical accuracy and OT. RA-EMS exhibited superior accuracy, suggesting its potential application prospects in endodontics. Further high-quality clinical studies are warranted.

Negotiation of Calcified Canals

The gradual formation of hard tissue along the root canal walls is a natural process associated with aging, typically progressing slowly over time. In reaction to tooth wear, operative procedures, vital pulp treatments, or regenerative endodontic procedures, hard tissue may also accumulate within the pulp canal space at a slow rate. In certain cases, such as dental trauma, autotransplantation, or orthodontic treatment, this deposition of hard tissue can accelerate unexpectedly, resulting in rapid narrowing or complete closure of the root canal space. This situation is called calcific metamorphosis (CM), root canal calcification, or pulp canal obliteration (PCO). Performing conventional endodontic therapy on severely calcified canals presents significant challenges and increases the risk of procedural accidents. Calcified canals introduce such complexity that dedicated negotiation concepts and specially designed instruments have been developed to deal with the challenge. This article seeks to review the existing methods for effectively navigating calcified canals and to introduce the buckling resistance activation test (BRAT) technique.

Accuracy comparison of single- and double-sleeve endodontic guides for fiber post removal

BACKGROUND

This study aimed to assess the accuracy of two different endodontic guides for fiber post removal.

METHODS

In this in vitro study, 54 maxillary canine fiber posts were mounted on 36 maxillary stone casts; 18 teeth were mounted unilaterally, and 36 teeth were mounted bilaterally. Static endodontic guides were fabricated according to baseline cone-beam computed tomography (CBCT) and intraoral optical scans using Blue Sky software. In the single-sleeve endodontic guides group (SSG), two anterior and two posterior teeth were included in a 5-unit guide. In the double-sleeve endodontic guides group (DSG) group, the guide was passed through the midline to include both canine teeth and extended by 2 teeth posterior to the canine teeth bilaterally (a 10-unit guide). After drilling, postoperative CBCT scans were taken and superimposed on the virtually designed path, and the maximum coronal deviation (MCD) at the marginal entry point of the tooth, maximum apical deviation (MAD) at 10 mm apical to the tooth margin, and maximum angular deflection (MAnD) of the drill were calculated.

RESULTS

The mean MCD, MAD, and MAnD were 0.34 mm, 0.6 mm, and 2.32 degrees, respectively, in the SSG and 0.31 mm, 0.7 mm, and 2.37 degrees, respectively, in the DSG. The two groups were not significantly different from each other in terms of MCD (P = 0.573), MAD (P = 0.290), or MAnD (P = 0.896).

CONCLUSIONS

The accuracies of the two techniques, the extended double sleeve guide and the single sleeve guide, were comparable and thus DSG may be used for removal of fiber posts in adjacent or distant teeth.

The Detection of Pulp Stones with Automatic Deep Learning in Panoramic Radiographies: An AI Pilot Study

This study aims to evaluate the effectiveness of employing a deep learning approach for the automated detection of pulp stones in panoramic imaging. A comprehensive dataset comprising 2409 panoramic radiography images (7564 labels) underwent labeling using the CranioCatch labeling program, developed in Eskişehir, Turkey. The dataset was stratified into three distinct subsets: training (n = 1929, 80% of the total), validation (n = 240, 10% of the total), and test (n = 240, 10% of the total) sets. To optimize the visual clarity of labeled regions, a 3 × 3 clash operation was applied to the images. The YOLOv5 architecture was employed for artificial intelligence modeling, yielding F1, sensitivity, and precision metrics of 0.7892, 0.8026, and 0.7762, respectively, during the evaluation of the test dataset. Among deep learning-based artificial intelligence algorithms applied to panoramic radiographs, the use of numerical identification for the detection of pulp stones has achieved remarkable success. It is expected that the success rates of training models will increase by using datasets consisting of a larger number of images. The use of artificial intelligence-supported clinical decision support system software has the potential to increase the efficiency and effectiveness of dentists.

Comparing accuracy in guided endodontics: dynamic real-time navigation, static guides, and manual approaches for access cavity preparation - an in vitro study using 3D printed teeth

OBJECTIVES

To assess root canal localization accuracy using a dynamic approach, surgical guides and freehand technique in vitro.

MATERIALS AND METHODS

Access cavities were prepared for 4 different 3D printed tooth types by 4 operators (n = 144). Deviations from the planning in angle and bur positioning were compared and operating time as well as tooth substance loss were evaluated (Kruskal-Wallis Test, ANOVA). Operating method, tooth type, and operator effects were analyzed (partial eta-squared statistic).

RESULTS

Angle deviation varied significantly between the operating methods (p < .0001): freehand (9.53 ± 6.36°), dynamic (2.82 ± 1.8°) and static navigation (1.12 ± 0.85°). The highest effect size was calculated for operating method (ηP²=0.524), followed by tooth type (0.364), and operator (0.08). Regarding deviation of bur base and tip localization no significant difference was found between the methods. Operating method mainly influenced both parameters (ηP²=0.471, 0.379) with minor effects of tooth type (0.157) and operator. Freehand technique caused most substance loss (p < .001), dynamic navigation least (p < .0001). Operating time was the shortest for freehand followed by static and dynamic navigation.

CONCLUSIONS

Guided endodontic access may aid in precise root canal localization and save tooth structure.

CLINICAL RELEVANCE

Although guided endodontic access preparation may require more time compared to the freehand technique, the guided navigation is more accurate and saves tooth structure.

Removal of fiber posts using conventional versus guided endodontics: a comparative study of dentin loss and complications

OBJECTIVES

To compare the efficacy of fiber post removal using conventional (CONV) versus guided endodontics (GE) in terms of dentin loss, residual resin material, procedural errors, and working time in vitro.

MATERIAL AND METHODS

Ninety human central incisors were root-filled and scanned by micro-computed tomography (CT), then restored with fiber posts and composite. Twenty-four sets of teeth with up to four human maxillary central incisors were fabricated and divided into three groups: conventional post removal by a general dentist (CG) or endodontology specialist (CS) and guided endodontics (GE) by a general dentist, yielding 30 teeth per operator and group. After treatment, the prepared access cavities were volumetrically assessed by micro-CT. Statistical significance was evaluated by one-way analysis of variance followed by post hoc comparisons with Tukey's HSD test and Pearson's chi-squared test for independence.

RESULTS

Both CONV and GE resulted in dentin loss and residual resin material. CS resulted in more dentin loss and less residual resin material than CG and GE (p < .05). All groups had some deviations from the original root canal but no perforations. The shortest working time was observed in the GE group.

CONCLUSIONS

Compared to the conventional freehand technique, GE resulted in significantly less radicular dentin loss, a few deviations but no perforations.

CLINICAL RELEVANCE

Guided endodontics can improve the speed and safety of fiber post removal without root perforation.

A laboratory study comparing the static navigation technique using a bur with a conventional freehand technique using ultrasonic tips for the removal of fibre posts

AIM

There are currently no high-quality studies comparing the static navigation technique with conventional methods of fibre post removal. The aim of this ex vivo study was to compare the effectiveness of fibre post removal between a static navigation technique and a conventional freehand technique using ultrasonics by experienced and inexperienced operators.

METHODOLOGY

Forty-eight extracted single-rooted human premolars were root-filled. A fibre post was cemented in all 48 teeth, which were then divided randomly into the following groups: static navigation group using burs; static navigation-ultrasonic group; and non-guided group using ultrasonic tips. The following parameters were evaluated for both experienced operators and inexperienced operators: reaching the gutta-percha root filling successfully, the time required to remove the entire post, the occurrence of lateral root perforations, and the amount of root dentine removed. The Kolmogorov-Smirnov test was used to examine the normality of the data; the anova test was used to compare the significant differences among groups; and Tukey tests were used for all two-by-two comparisons. The significance level was set at 0.05.

RESULTS

In the static navigation group, the gutta-percha was reached significantly more frequently than in the non-guided group (p < .05). The static navigation approach required significantly less time than the non-guided approach to reach the gutta-percha (p < .05). The total removal of posts was significantly different between groups (p < .05), but there was no significant difference between experienced and inexperienced operators in the static navigation group (p > .05). More perforations were associated with the non-guided group than with the other two groups. The total mean loss of dentine in the non-guided group in all directions was 0.39 (±0.17) mm, with 0.25 (±0.09) mm for experienced, and 0.42 (±0.16) mm for inexperienced operators.

CONCLUSION

When compared to a conventional ultrasonic technique for the removal of fibre posts, the static navigation method using burs resulted in less dentine removal, more rapid access to the gutta-percha root filling, less overall time to remove the posts, and fewer complications. When using static navigation, there was no difference in performance between experienced and inexperienced operators.

A Global Overview of Guided Endodontics: A Bibliometric Analysis

INTRODUCTION

This review aimed to analyze the trend and main characteristics of articles related to guided endodontics (GE).

METHODS

The search was conducted in May 2023 on Web of Science. GE-related articles were included, and conferences were excluded. Three researchers selected the articles and extracted: the number of citations; year and journal; design and study theme; authorship and institutions; country and continent. Collaborative networks were generated in the Visualization of Similarities Viewer software. The relationship between data was determined by Spearman's correlation. Google Trends was used to investigate the global popularity of GE research.

RESULTS

The search resulted in 135 articles, of which 85 were included. The most cited article totaled 116 citations. The studies were published between 2016 and 2023, most frequently in 2022 (n = 22). The most prevalent journal was the Journal of Endodontics (n = 28). Case report (n = 38) was the most frequent study design. The most studied theme was the use of static GE for calcified canals (n = 27). Connert T was the author with the highest number of articles (n = 13). The University of Basel (n = 9) stood out. The most prevalent country was Brazil (n = 13). Europe was the most frequent continent (n = 38). Visualization of Similarities Viewer demonstrated an interaction between authors. There was a moderate positive correlation between citations and the impact factor (rho = .483). According to Google Trends, the United States was the country that most researched GE.

CONCLUSIONS

Based on this review, a more significant research interest in GE was observed in Europe, addressing the application of GE in locating severely calcified root canals.

Expert consensus on digital guided therapy for endodontic diseases

Digital guided therapy (DGT) has been advocated as a contemporary computer-aided technique for treating endodontic diseases in recent decades. The concept of DGT for endodontic diseases is categorized into static guided endodontics (SGE), necessitating a meticulously designed template, and dynamic guided endodontics (DGE), which utilizes an optical triangulation tracking system. Based on cone-beam computed tomography (CBCT) images superimposed with or without oral scan (OS) data, a virtual template is crafted through software and subsequently translated into a 3-dimensional (3D) printing for SGE, while the system guides the drilling path with a real-time navigation in DGE. DGT was reported to resolve a series of challenging endodontic cases, including teeth with pulp obliteration, teeth with anatomical abnormalities, teeth requiring retreatment, posterior teeth needing endodontic microsurgery, and tooth autotransplantation. Case reports and basic researches all demonstrate that DGT stand as a precise, time-saving, and minimally invasive approach in contrast to conventional freehand method. This expert consensus mainly introduces the case selection, general workflow, evaluation, and impact factor of DGT, which could provide an alternative working strategy in endodontic treatment.

Three-dimensional accuracy of endodontic access preparations using novel nonrestrictive static guides: A laboratory study

This study compared the accuracy of traditional endodontic access to conservative access cavities prepared with or without novel nonrestrictive endodontic access guides by operators with different levels of clinical experience without visual aids, using a three-dimensional volumetric accuracy analysis method. The accuracy of the preparations was analysed using a novel 3D volumetric analysis by calculating the intersection and volume of the actual cavities to the planned model cavities. The experienced operator significantly outperformed the inexperienced operator in the free hand groups, while accuracy of conservative access cavities prepared using the novel guides were comparable and significantly higher than the other groups (p < 0.05). The results demonstrated clinical experience enhanced endodontic preparations accuracy and that nonrestrictive guides achieve accurate conservative access cavities which are independent of the operator skill level. Additionally, the three-dimensional volumetric analysis is a consistent and objective method to judge the accuracy of guided endodontic techniques.

A literature review of local and systemic considerations for endodontic treatments in older adults

OBJECTIVES

The aim of this literature review was to summarise the clinical important findings on the endodontic treatment outcome in older patients (≥60 years old) with pulpal/periapical disease considering local and systemic factors from a body of knowledge that is heterogeneous in methods or disciplines.

BACKGROUND

Due to the increasing number of older patients in the endodontic practice, and the current trend for tooth preservation, the need for clinicians to have a better understanding of age-related implications that may influence the required endodontic treatment in older adults to retain their natural dentition is indispensable.

METHODS

PubMed/Medline and Embase was searched by a medical librarian using specific terms based on inclusion/exclusion criteria. The reference list was hand-seached for additional relevant publications between 2005-2020. A combination of these terms was performed uing Boolean operators and MeSH terms.

RESULTS

Of the 1577 publications identified manually and electronically, 25 were included to be fully reviewed by the examiners. The data was derived from three systematic reviews, one systematic and meta-analysis, three case series, four prospective and 14 retrospective cohorts. Overall, there was heterogeneity in reporting as well as limitations in most studies.

CONCLUSIONS

The outcome of endodontic treatment (ET) either nonsurgical or surgical or combination of these is not affected by older age. ET can be the treatment of choice in older patients wiht pulpal/periapical disease. There is no evidence that older age per se affects the outcome of any type of endodontic treatment.

Guided endodontics versus conventional access cavity preparation: an ex vivo comparative study of substance loss

BACKGROUND

To compare the outcomes of conventional access cavity preparation (CONV) versus guided endodontics (GE) for access cavity preparation in anterior teeth with pulp canal calcification (PCC) regarding root canal detection, substance loss, procedural time, and need for additional radiographs.

METHODS

Extracted, sound human teeth with PCC (n = 108) were matched in pairs, divided into two groups and used to produce 18 models. An independent endodontist and a general dentist performed access cavity preparation under simulated clinical conditions on nine models each (54 teeth). The endodontist used the conventional technique and the general dentist GE. Time needed to access the root canals and the number of additional radiographs were recorded. Pre- and postoperative cone-beam computed tomography scans were obtained to measure substance loss. Statistical significance was tested by examining the overlap of 95% confidence intervals (CIs) between the groups.

RESULTS

All root canals were successfully accessed by both methods. There were no significant differences in substance loss (CI: CONV 15.9-29.6 mm3 vs. GE 17.6-27.5mm3) or procedural time (CI: CONV 163.3-248.5 s vs. GE 231.9-326.8 s). However, 31 additional radiographs were required for GE compared to none for CONV.

CONCLUSIONS

For access cavity preparation in teeth with PCC, both CONV by a specialist and GE by a general dentist produce good results in terms of substance loss and time requirements.

Application of an Endodontic Static Guide in Fiber Post Removal from a Compromised Tooth

Removing a fiber post from a root canal that requires endodontic retreatment is often very challenging. Conventional freehand techniques for removing fiber posts are time-consuming, sometimes result in iatrogenic errors, and heavily rely on the practitioner's experience. The endodontic static guide can be an alternative method. While the use of an endodontic 3D-printed static guide for fiber post removal has been reported as highly successful, it can also cause complications. Skipping any critical steps during the guide construction or its clinical application can lead to errors. This case report presents the saving of a compromised tooth with a fractured fiber post and a periapical lesion around the apex through the use of an endodontic static guide for fiber post removal. This study describes possible sources of error that may happen during construction and clinical use of the guide.

Guided endodontics of calcified canals: The drilling path of rotary systems and intracanal dentin wear

This study evaluated the drilling path (mm) and the dentin wear (mm3 ) of two instruments used during guided endodontic access. Twenty mandibular incisors with calcified canals were selected using cone-beam computed tomography (CBCT) and fixed in articulated models. Preoperative CBCT scans were performed in combination with intraoral scanning, and the images were reconstructed in the Blue Sky Bio software for access planning and printing the guides. The access cavity was drilled with 1.0-mm-diameter bur (DSP) and 0.8-mm-diameter bur (Munce). Postoperative CBCT was performed, and the images obtained preoperative and postoperative were superimposed for the analyses. Data were analysed by a t-test and linear regression (α = 0.05). No difference was found in the drilling path (p = 0.422). However, the Munce bur had higher dentin wear than the DSP bur (p = 0.011). A positive linear correlation (R2  = 0.859) was found between the factors.

Influence of Calcified Canals Localization on the Accuracy of Guided Endodontic Therapy: A Case Series Study

This study aimed to evaluate the precision of the guided endodontic technique applied to calcified canals in anterior teeth in relation to demographic and dental variables. The present observational study was conducted during the period 2020-2021. The patients were consecutive referrals at the Department of Endodontics and Conservative Dentistry of the University Hospital of Siena. The guided endodontics protocol was applied using 0.75 mm diameter burs for the lower teeth and 0.90 mm for the upper teeth. The inclusion criteria were as follows: (i) teeth with pulp canal obliteration (PCO) associated with a periapical lesion (periapical index (PAI) ≥ 2); (ii) teeth with PCO that require the placement of a root canal post for the execution of a prosthetic treatment; (iii) teeth in which surgical treatment was not justified. Socio-demographic characteristics of the patients were recorded and related to the drill path accuracy through the guide in the calcified endodontic canal, evaluated through a radiographic analysis, and classified as optimal (in the center of the root canal) and acceptable (deviated peripherally/tangentially). A logistic regression model was built to predict the factors that influence the poor precision of the technique. Seventeen patients (mean age 48 years) with eighteen calcified single-rooted teeth were enrolled. All teeth were associated with periapical lesions with PAI scores from 2 to 5 (mean PAI: 3.055). From the model, it is evident that the presence of a calcification affecting the apical area of the root increases the probability of being off-center with the bur by about 15 times. In addition, a previous attempt at endodontic treatment and the position in the lower arch increases the probability of non-centrality of the drill, although in a non-statistically significant way. In any of the analyzed cases, the guided endodontic technique applied to PCO did not determine the presence of iatrogenic errors, such as perforations. However, the apical localization of the obliteration increases the probability of being off-center with the drill during the instrumentation phase by about 15 times.

Access Cavity Preparation and Localization of Root Canals Using Guides in 3D-Printed Teeth with Calcified Root Canals: An In Vitro CBCT Study

Pulp canal obliteration (PCO) is a significant complication in endodontics that can occur due to various factors. Cone beam computed tomography (CBCT) is a useful diagnostic tool for identifying root canal anatomy and variations, and guided endodontics is emerging as an alternative treatment solution for teeth with partially or entirely obliterated pulpal canals. However, the accuracy of CBCT-guided 3D-printed guides on different materials and layer thicknesses is not well understood. Therefore, this study aimed to evaluate the accuracy of guides prepared using CBCT images on 3D-printed teeth with stereolithography (SLA) using three different materials and two different layer thicknesses. This study found that 3D-printed guides were accurate and reliable for accessing 3D-manufactured obliterated teeth and reaching the apical area. No significant differences in distance or angle measurements were found when different guide materials were used, suggesting that materials can be selected based on availability and cost. These findings contribute to the knowledge base regarding the effectiveness of 3D printing technology in guided endodontics and can help to identify the most suitable materials and techniques for this application.

Ex-vivo and in-vivo validation of a novel measuring protocol for guided endodontics

OBJECTIVES

To (1) validate the use of a post-operative intraoral scan (IOS) versus Cone Beam Computed Tomography (CBCT), gold standard, on its ability to measure the accuracy of guided endodontics, and (2) present clinical data on the accuracy of guided endodontics.

METHODS

Four models, including 10 extracted teeth each, were created. Forty guided access cavities were planned on dentin to simulate pulp canal obliteration (PCO). Two operators performed guided access cavities. A post-operative CBCT and IOS were acquired. The deviation coronally, apically, and angular deviation was measured with CBCT and IOS. Clinical accuracy was measured using an IOS acquired immediately after drilling the access cavity with the aid of a guide. Data analysis was performed using multiway Anova and corrected for simultaneous hypothesis testing according to Tukey. P ≤ 0.05 was considered statistically significant. Descriptive statistics on the clinical accuracy of guided endodontics were performed.

RESULTS

Thirty-eight cavities were assessed with a mean length of 13.8 mm. No statistical difference between operators and methods was found for all parameters (P > 0.05). Thirty-three patients were treated with guided endodontics and measured using an IOS. Results show an average coronal, apical, and angular deviation of 0.2 mm, 0.45 mm, and 1.91^° respectively. The average length of the access cavities was 12.5 mm.

CONCLUSIONS

An IOS can be used to measure the accuracy of guided endodontics. Clinical data showed high accuracy of guided endodontics with a mean apical deviation smaller than 0.5 mm and a mean angular deviation of less than 2^°.

CLINICAL SIGNIFICANCE

The use of an IOS does not involve additional radiation exposure. A safety margin of at least 1 mm around the planned trajectory should be respected when planning the case to minimize the possibility of root perforation.

Microcomputed tomography analysis of the radicular residual dentin thickness in mandibular second molars after virtual fiber post placement: Identification of danger zones

STATEMENT OF PROBLEM

Mandibular second molars have variable root, pulp chamber floor, and radicular groove morphologies, potentially affecting residual dentin thickness and post placement suitability. However, an identification of the danger zones is lacking.

PURPOSE

The purpose of this in vitro study was to investigate the residual dentin thickness in the danger zone of mandibular second molars after virtual fiber post placement by using a simulation method based on microcomputed tomography (μCT).

MATERIAL AND METHODS

A total of 84 extracted mandibular second molars were scanned using μCT and classified according to root morphology (separate or fused) and pulp chamber floor morphologies (C-shaped, non-C-shaped, or no pulp chamber floor). Fused-root mandibular second molars were further classified based on the radicular groove type (V-, U-, or Ω-shaped). All specimens were accessed, instrumented, and rescanned with μCT. Two types of commercial fiber posts were also scanned. Clinical fiber post placement was simulated in all prepared canals by using a multifunctional software program. The minimum residual dentin thickness of each root canal was measured and analyzed by using nonparametric tests to identify the danger zone. Perforation rates were calculated and recorded.

RESULTS

Larger fiber posts decreased minimum residual dentin thickness (P<.05) and increased perforation rate. In regard to mandibular second molars with separate roots, the distal root canal exhibited a significantly higher minimum residual dentin thickness than the mesiobuccal and mesiolingual root canals (P<.05). However, no significant difference in minimum residual dentin thickness was found between the different canals in fused-root mandibular second molars with C-shaped pulp chamber floors (P<.05). Fused-root mandibular second molars with Ω-shaped radicular grooves had a lower minimum residual dentin thickness than those with V-shaped radicular grooves (P<.05) and demonstrated the highest perforation rate.

CONCLUSIONS

The morphologies of the root, pulp chamber floor, and radicular groove were correlated with residual dentin thickness distribution in mandibular second molars after fiber post placement. A comprehensive understanding of mandibular second molar morphology is essential for determining the suitability of post-and-core crown restorations after endodontic treatment.

Tooth substance loss after incisal endodontic access and novel single-tooth template-guided endodontic access in three-dimensional printed resin incisors with simulated pulp canal calcification: A comparative in vitro study

Context Background

Guided endodontics has various applications, one of which is for calcified canal negotiation. Recently, a new single-tooth template has been fabricated to overcome the drawbacks of bulky guides, which are difficult to use with rubber dam isolation.

Aim

This study aimed to assess the efficacy of the novel single-tooth template for negotiation of pulp canal calcification (PCC) in three-dimensional (3D)-printed resin incisors by comparing substance loss and time taken between incisal endodontic access (IEA) and single-tooth template-guided endodontic access (SGEA).

Methods

Forty-two resin incisor teeth having patent canal in the apical third were used (N = 21/group). They were subcategorized based on operator's experience into senior endodontist (SE), postgraduate (PG), and undergraduate (UG) (n = 7/operator). Canals were negotiated conventionally for IEA and using the single-tooth template for SGEA. Substance loss was calculated from the volume difference between pre- and postoperative cone-beam computed tomography scans. The time taken was also recorded.

Statistical Analysis Used

Statistical analysis was performed using unpaired t-test and one-way analysis of variance test.

Results

Canals were successfully negotiated in 100% and 95% of teeth in the SGEA and IEA groups, respectively. Overall substance loss and time taken were significantly lesser for SGEA for all operators (P < 0.001). In the IEA group, post hoc test showed statistical significance between SE and UG for substance loss (P < 0.05) and SE-UG and PG-UG for time taken (P < 0.05). No significant difference among operators was noted for both parameters in SGEA.

Conclusions

SGEA resulted in significantly lesser substance loss and time taken for canal negotiation in 3D-printed resin incisors with simulated PCC. This was independent of the experience levels of the operator.

Root Maturation of an Immature Dens Invaginatus Despite Unsuccessful Revitalization Procedure: A Case Report and Recommendations for Educational Purposes

BACKGROUND

The clinical management of teeth with complex dens invaginatus (DI) malformations and apical periodontitis may be challenging due to the lack of routine. The aim of this case report is to describe the endodontic treatment of an immature tooth with DI and to discuss strategies for preclinical training for teeth with such malformations.

CASE REPORT

A 9-year-old male presented with an immature maxillary incisor with DI (Oehlers Type II) and apical periodontitis which was diagnosed by cone beam computed tomography (CBCT). Revitalization was initially attempted but then abandoned after failure to generate a stable blood clot. Nevertheless, considerable increase in both root length and thickness could be detected after medication with calcium hydroxide followed by root canal filling with MTA as an apical plug.

CONCLUSIONS

The endodontic management of teeth with DI requires thorough treatment planning. In immature teeth, under certain conditions, root maturation may occur even with conventional apexification procedures. From an educational perspective, different strategies including CBCT and 3D-printed transparent tooth models for visualization of the complex internal morphology and redesigned 3D-printed replica with various degrees of difficulty for endodontic training, can be used to overcome the challenges associated with endodontic treatment of such teeth.

Effectiveness of guided endodontics in locating calcified root canals: a systematic review

OBJECTIVES

The aim of this study is to answer the question: "Is guided endodontics an effective technique for locating calcified canals?".

METHODS

A systematic search was carried out by two independent authors in PubMed, Web of Science, Scopus, and Scielo databases. According to the PIOS criteria, observational studies, ex vivo studies, clinical case reports, and case series were included. The quality of evidence of observational studies, case reports, and case series were assessed using the respective Joanna Briggs Institute critical appraisal tool, and a previous personalized tool was used to assess the quality of the ex vivo studies.

RESULTS

Forty-five studies were included. Of them, 21 were clinical case reports, 11 case series, 12 ex vivo studies, and 1 cohort study. Of the 45 studies analyzed, 43 reported that guided endodontics is an effective and precise technique to access the permeable portion of calcified canals. Only 2 studies report accidents or failures related to the use of endodontic guides.

CONCLUSIONS

Guided endodontics allows conservative access, minimizes accidents, and is effective in locating calcified canals; however, it is a technique that still presents limitations.

CLINICAL RELEVANCE

Guided endodontics has been proposed as a simple and effective technique for the treatment of calcified canals. The expansion of this technique requires knowing its benefits and limitations to ensure success and avoid accidents.

Guided Access Cavity Preparation Using a New Simplified Digital Workflow

INTRODUCTION

This study evaluated the precision of a simplified workflow using only preoperative cone-beam computed tomographic (CBCT) scans to gain guided access to root canals of extracted mandibular molars. A workflow using CBCT scanning associated with 3-dimensional oral scanning was used as a reference for comparison. The influence of the presence of coronal restoration in the simplified workflow was also evaluated.

METHODS

Forty-five mandibular molars were randomized into 3 groups: a control group in which digital planning was performed with CBCT and oral scanning and 2 experimental groups in which digital planning was performed only with CBCT examination. In experimental group 1, teeth had no coronal restorations, whereas in group 2 teeth presented with coronal composite restorations. After digital planning, the teeth were accessed using the guides, and a new CBCT scan was made to overlap the pre- and postoperative examinations. Precision was measured by calculating the deviation between the planned and prepared cavities in millimeters and angle. Data were compared using 1-way analysis of variance (P < .05).

RESULTS

All root canals were accessible after access preparation in all tested groups. Deviations of the planned and prepared access cavities were low, with a mean value of 0.55, 0.58, and 0.47 mm and 1.98°, 2.45°, and 1.43° for the control group, group 1, and group 2, respectively. No significant differences in millimeters or angle were observed among the 3 tested groups (P > .05).

CONCLUSIONS

The simplified digital workflow using only CBCT examination allowed a high level of precision in obtaining access in extracted molars with and without coronal restoration, presenting similar results compared with the digital workflow using CBCT and 3-dimensional oral scanning.

The accuracy of using guided endodontics in access cavity preparation and the temperature changes of root surface: An in vitro study

Background

Guided endodontics is a successful technique that has been gradually applied to endodontic therapy in recent years without being affected by the operator’s experience. However, the guided bur produces excessive heat during continuous rotation and friction with root canal walls, it is not clear whether the degree of temperature increase may lead to the periodontal ligament and alveolar bone damage.

Methods

A total of 58 teeth were used, of which 40 teeth were not grouped, all used to evaluate the accuracy. 40 single-rooted premolars were scanned using CBCT and an intra-oral scanner, and 3D-printed guided plates were made with the pre-designed access. A custom-made guided bur was used to prepare the access cavities. The postoperative CBCT data and pre-designed pathways were matched to evaluate the deviation between the planned and virtual paths. The other 18 teeth were randomly divided into three groups (ET20 and ProTaper F3 as the control group, guided endodontics as the test group), with 6 teeth in each group. The temperature changes on the root surfaces were inspected with a thermocouple thermometer.

Results

The average deviation on the tip and the base of the bur was 0.30 mm and 0.28 mm (mesial/distal), and 0.28 mm and 0.25 mm (buccal/lingual). The average angle deviation was 3.62°. The mean root surface temperature rise of the guided endodontics group was the lowest (5.07 °C) (P < 0.05).

Conclusions

The access cavity preparation performed with guided endodontics has feasible accuracy and low-temperature rise on the root surfaces. Due to the limitations of the study, whether it has high reliability and safety in clinical applications needs to be further studied in vivo.

Guided Endodontics: A Literature Review

The main objective of this paper is to perform an updated literature review of guided endodontics based on the available up-to-date scientific literature to identify and describe the technique, its benefits, and its limitations. Four electronic databases (PubMed, Scopus, Science Direct, and Web of Science) were used to perform a literature search from 1 January 2017 to 13 May 2022. After discarding duplicates, out of 1047 results, a total of 29 articles were eligible for review. Guided endodontics is a novel technique that is currently evolving. It is applied in multiple treatments, especially in accessing and locating root canals in teeth with pulp canal obliteration, microsurgical endodontics, and removing glass fiber posts in endodontic retreatments. In addition, it is independent of an operator's experience, requires less treatment time for the patient, and is more accurate and safer than conventional endodontics.

EDTA Combined with C-Pilot Files and Microultrasound for Root Canal Calcification: Dredging Effect and Safety Analysis

Objective

This paper discussed the dredging effect and safety of ethylenediaminetetraacetic acid (EDTA) combined with C-pilot files and microultrasound (mUS) on root canal calcification.

Methods

From October 2021 to January 2022, 132 patients with calcified root canals treated in our hospital were selected as the research subjects. Among them, 64 cases who received EDTA combined with C-pilot Files and mUS plus ultrasonic instruments to dredge calcified root canals were regarded as the research group (RG), and another 68 cases given ultrasonic instruments plus C-pilot files were regarded as the control group (CG). The root canal dredging time was recorded, and the dredging success rate and total success rate of different tooth positions and calcification sites were compared between groups. The clinical efficacy was assessed 6 months after treatment. Pain severity was evaluated by the Pain Intensity Numerical Rating Scale (PI-NRS) before (T0), during (T1), and after treatment (T2). Finally, the incidence of adverse reactions within one week after treatment was counted.

Results

RG was observed with statistically higher success rates of root canal dredging in different tooth positions and calcified sites than CG (P < 0.05). Besides, the total effective rate of treatment was 92.19% in RG, which was also higher compared with CG, while the root canal dredging time in RG was shorter than that in CG (P < 0.05). Increased NRS scores were found in both groups at T1, and the score in RG was significantly lower compared with that in CG. At T2, both groups showed a lower PI-NRS score than T1 but higher than T0, and the score at T2 was also lower in RG as compared to CG (P < 0.05). Moreover, the reduced incidence of adverse reactions were observed in RG compared with CG (P < 0.05).

Conclusions

EDTA combined with C-pilot files and mUS can effectively improve the dredging success rate of root canals obstructed by calcification, shorten the dredging time, and improve patient comfort, which is an effective method for clinical dredging of calcification obstructed root canals.

Present status and future directions - Guided endodontics

Luxation injuries and other stimuli may lead to a pulp canal obliteration (PCO). Even though the apposition of tertiary dentine is a sign of a vital pulp, in some cases root canal treatment is indicated in the long term due to apical periodontitis or pulpitis. Depending on the extent of PCO, root canal treatment may be challenging even for experienced and well-equipped endodontic specialists. The 'guided endodontics' (GE) technique was introduced 6 years ago as an alternative to conventional access cavity preparation for teeth with PCO and apical pathosis or irreversible pulpitis. Using three-dimensional radiological imaging such as cone-beam computed tomography and a digital surface scan, an optimal access to the orifice of the calcified root canal can be planned virtually with appropriate software. GE is implemented either with the help of templates analogous to guided implantology (= static navigation) or by means of dynamic navigation based on a camera-marker system. GE has emerged as a field of research in the last 6 years with very promising laboratory-based results regarding the accuracy of guided endodontic access cavities for both static and dynamic navigation. Clinical implementation seems to provide favourable results, but the evidence is mainly based on numerous case reports and a few case series. This narrative review aims to provide an update on the present status of GE and to identify relevant research areas that could contribute to further improvements of this technique.

Guided Endodontics: Static vs. Dynamic Computer-Aided Techniques—A Literature Review

(1) Background: access cavity preparation is the first stage of non-surgical endodontic treatment. The inaccuracy of this step may lead to numerous intraoperative complications, which impair the root canal treatment’s prognosis and therefore the tooth’s survival. Guided endodontics, meaning computer-aided static (SN) and dynamic navigation (DN) techniques, has recently emerged as a new approach for root canal location in complex cases. This review aims to compare SN and DN guided endodontics’ techniques in non-surgical endodontic treatment. (2) Methods: an electronic search was performed on PubMed, Scopus, and Cochrane Library databases until October 2021. Studies were restricted by language (English, Spanish and Portuguese) and year of publication (from 2011 to 2021). (3) Results: a total of 449, 168 and 32 articles were identified in PubMed, Scopus, and Cochrane Library databases, respectively, after the initial search. Of the 649 articles, 134 duplicates were discarded. In this case, 67 articles were selected after title and abstract screening, of which 60 were assessed for eligibility through full-text analysis, with one article being excluded. Four cross-references were added. Thus, 63 studies were included. (4) Conclusions: guided endodontics procedures present minimally invasive and accurate techniques which allow for highly predictable root canal location, greater tooth structure preservation and lower risk of iatrogenic damage, mainly when performed by less experienced operators. Both SN and DN approaches exhibit different advantages and disadvantages that make them useful in distinct clinical scenarios.

Accuracy of Endodontic Access Cavities Performed Using an Augmented Reality Appliance: An In Vitro Study

INTRODUCTION

The purpose of this study was to compare and contrast the accuracy of endodontic access cavities created using an augmented reality appliance to those performed using the conventional technique.

MATERIALS AND METHODS

60 single-rooted anterior teeth were chosen for study and randomly divided between two study groups: Group A-endodontic access cavities created using an augmented reality appliance as a guide (n = 30) (AR); and Group B-endodontic access cavities performed with the manual (freehand) technique (n = 30) (MN). A 3D implant planning software was used to plan the endodontic access cavities for the AR group, with a cone-beam computed tomography (CBCT) and 3D intraoral surface scan taken preoperatively and subsequently transferred to the augmented reality device. A second CBCT scan was taken after performing the endodontic access cavities to compare the planned and performed endodontic access for accuracy. Therapeutic planning software and Student's t-test were used to analyze the cavities at the apical, coronal, and angular levels. The repeatability and reproducibility of the digital measurement technique were analyzed using Gage R&R statistical analysis.

RESULTS

The paired t-test found statistically significant differences between the study groups at the coronal (p = 0.0029) and apical (p = 0.0063) levels; no statistically significant differences were found between the AR and MN groups at the angular (p = 0.6596) level.

CONCLUSIONS

Augmented reality devices enable the safer and more accurate performance of endodontic access cavities when compared with the conventional freehand technique.

Guided Endodontics as a Personalized Tool for Complicated Clinical Cases

The aim of this paper is to present a technique to individualize root canal localization in teeth with calcified root canals using a digitally planned, 3D-printed endodontic guide. Root canal calcification is characterized by the apposition of tertiary dentin along the canal wall. The endodontic treatment of teeth with calcified canals is often challenging. However, digital dentistry meets these challenges. Merging CBCT images with an intraoral scan allows a clinician to prepare an endodontic guide. This article describes the clinical and digital workflow of the guided endodontic access approach in teeth with difficulties in terms of root canal localization due to post-traumatic pulp canal obliteration (PCO) and canal calcification in elderly patients. The path of entry into the root canal system was planned using cone-beam computed tomography (CBCT). The template was printed on a 3D printer using transparent resin. During root canal treatment (RCT), the endodontic tool was inserted through the sleeve until the desired location was reached. The use of an endodontic guide allowed for minimally invasive RCT, avoiding the excessive loss of tooth structures. Navigated endodontics enables clinicians to perform RCT in a more predictable manner and allows clinicians to avoid iatrogenic complications, which improves the treatment prognosis.

Guided Endodontics in the Management of Intracanal Separated Instruments: A Case Report

AIM

The aim of this case report is to describe the removal of a fractured file in mandibular right first premolar through the application of an endodontic template to guide a trephine until the file.

BACKGROUND

The fracture of an endodontic instrument is a rare complication that requires therapeutic management. Removal procedures often cause excessive dentine loss. To limit this inconvenience, several techniques describing the removal of fractured files in the coronal third of the canal have been proposed. The guide facilitates the use of the Zumax removal kit (Zumax Medical Co. Ltd., Suzhou, China).

CASE DESCRIPTION

A 30-year-old patient was referred to dental office for the endodontic retreatment of his mandibular right first premolar. The tooth was painful to percussion and buccal palpation. The periapical radiograph showed a periapical lesion, a defective root canal treatment, and the presence of a fractured file. It was decided to use the Zumax kit in order to remove the instrument. By using digital implantology software, a guide was constructed with a tube to guide a trephine and achieve straight-line access. The trephine was later driven by the resin guide. After completing the drilling, the instrument was removed with the Zumax extractor and the canal was then prepared, disinfected, and filled.

CONCLUSION

The current case describes the removal of a separated instrument by use of a new approach that is planned on computer software and guided by a resin guide.

CLINICAL SIGNIFICANCE

The guided endodontic technique avoids excessive loss of dental structure and simplifies the procedure by reducing chair time and increasing the operator's confidence.

Fiber Post Removal Using a Conservative Fully Guided Approach: A Dental Technique

This report describes the usefulness of an endodontic template for the removal of a fiber post. A 40-year-old man presented with discomfort in the maxillary left canine. Clinical and radiographic examinations showed tooth #23 with a permanent core material retained with fiber post along with a persistent apical radiolucency. Among the various treatment modalities, nonsurgical root canal retreatment with fiber post removal using a conservative fully guided approach was proposed. After obtaining both the cone-beam computed tomographic images and the cast surface scan, their data were merged using implant planning software (ImplaStation for Windows x64 Bit Beta Version, ProDigiDent, Miami, Florida, USA) and superimposed. The drilling space was planned based on the location, diameter, and apical extent of the fiber post and was virtually overlapped and transferred clinically using a resin template to drill through the fiber post. With guides in position over the rubber dam, drilling was made with increments of 2 mm using a size 4 long-shank round bur (Thomas, Bourges, France) until it exposed the coronal gutta-percha. As soon as the canal was located, K3 rotary files (Sybron Endo, Orange, USA) were used along with chloroform to remove the old obturating materials. Then, additional shaping and cleaning were done with ProTaper Next rotary files (Dentsply Sirona, Ballaigues, Switzerland), sizes X2 and X3, and 5.25% NaOCl irrigation, respectively. The root canal was then dried with paper points and obturated with gutta-percha and AH Plus sealer (Dentsply Sirona, Ballaigues, Switzerland) using the continuous-wave compaction technique. Finally, the tooth was temporarily restored using the double seal technique with zinc oxide and zinc sulfate-based temporary material (Cavit W; 3M ESPE, St. Paul, MN, USA) and resin-modified glass ionomer material (Photac Fil; ESPE, Norristown, PA, USA) filling materials and referred for the final restoration.

10-Year Follow-up of Previously-Traumatized Immature Permanent Incisors Sustaining Second and Third Traumatic Injuries After Revascularization Treatment: Case reports

The long-term prognosis of previously traumatized immature permanent teeth treated with guided endodontic repair is well documented, but little is known about how these teeth respond to further traumatic injury after treatment. This case report presents the 10-year clinical and radiographic findings of two patients with traumatized maxillary incisors who underwent guided endodontic repair treatment and sustained two further traumatic injuries. Three crown-fractured maxillary central incisors with pulp necrosis were treated with a protocol that used 2.5% NaOCl irrigation, 3-4 week medication with calcium hydroxide or ciprofloxacin-metronidazole paste, induction of apical bleeding, and coronal sealing with mineral trioxide aggregate. One tooth sustained subluxation and a crown fracture after 20 months and 7 years, respectively. Two other teeth had a luxation injury at 9 months and subluxation 6.5 years after the regenerative treatment. One subluxated and one luxated tooth remained free of symptoms for 10 years with radiographic evidence of progressive root canal calcification, while the other luxated incisor required root canal treatment after 7.5 years. Although teeth treated with the so-called "regenerative" endodontic techniques do not possess true pulp tissue, the reparative tissue may respond to traumatic injuries in a similar manner to teeth with normal pulps.

Design of 3D-printed macro-models for undergraduates' preclinical practice of endodontic access cavities

INTRODUCTION

Endodontic access cavity is one of the steps most feared by dental students. The objective of the present work was to show the design phases of different realistic macro-models of a lower first molar, showing root canal anatomy and the ideal access cavity.

MATERIALS AND METHODS

Virtual models were designed with MeshMixer, MeshLab and Blender from the data collected (X-rays, CBCT and optical impression) and then printed. Two types of printers-FDM (fused deposition modelling) and SLA (stereolithography) printers-were used to obtain different prototypes which led to final models. A satisfaction questionnaire was then sent to students, after manipulation, to assess the relevance of these models.

RESULTS

Two final models of a lower first molar with an extended size (×9) were finally printed with an SLA laser printer with a transparent liquid resin. The first model represented the tooth with its optimal endodontic access cavity. The second one was designed to be divided into two parts according to a mesio-distal axis in order to visualise the root canal system. Most students found these macro-models to be effective tools for endodontic training.

DISCUSSION

3D printing is a proven technology which is no exception in dentistry. Some authors have already proposed 3D-printed replicas of teeth for endodontic education. Macro-models have been designed, printed and made available to students during preclinical courses before and during training.

CONCLUSION

These educational macro-models should strengthen the knowledge and skills of students to improve their clinical and future practice within the dental office.

Application of computer-assisted dynamic navigation in complex root canal treatments: Report of two cases of calcified canals

Root canal treatment and non-vital bleaching of teeth with pulp canal obliteration may represent a complex challenge to the clinician. This report describes the usefulness of the computer-assisted dynamic navigation system for the root canal treatment of two cases of teeth with a history of traumatic injury, extensively obliterated root canals and crown discoloration. Clinical and cone-beam computed tomographic evaluations were completed prior to procedures and 12 months after treatment. Both cases were treated using a computer-assisted dynamic navigation system coupled to a high-speed handpiece in order to establish the location and orientation of the partially obliterated canal and endodontic access route planning. The system allowed an accurate localisation of the root canal with a conservative access cavity. At the 12-month recall examination, the patients continue to be symptom-free, with a normal appearance of the mucogingival complex, adequate restoration of the tooth colour and intact periapical structures.

Present status and future directions -Management of curved and calcified root canals

Root canal curvature and calcification introduce factors that increase the risk of procedural accidents during root canal treatment. The inability to achieve patency to the apical third, asymmetrical dentine removal leading to transportation, perforation and instrument fracture inside the curved trajectories are some of the procedural problems that might jeopardize the management of intraradicular infection and result in poor treatment outcomes. In fact, curved and constricted canals introduce such complexity that total instrumentation concepts and specially designed instruments have been developed to deal with the challenge. This narrative review seeks to provide and consolidate the principles necessary for understanding the dynamics of curved and constricted canal management and to improve the understanding for future developments in this field.

Present status and future directions - Minimal endodontic access cavities

In the last decades, the move of Medicine towards minimally invasive treatments is notorious and scientifically grounded. As Dentistry naturally follows its footsteps, minimal access preparation also became a trend topic in the endodontic field. This procedure aims to maximize preservation of dentine tissue, backed up by the idea that this is an effective way to reduce the incidence of post-treatment tooth fracture. However, with the assessment of the body of evidence on this topic, it is possible to observe some key-points (a) the demand for nomenclature standardization, (b) the requirement of specific tools such as ultra-flexible instruments, visual magnification, superior illumination, and three-dimensional imaging technology, (c) minimally invasive treatment does not seem to affect orifice location and mechanical preparation when using adequate armamentarium, but it (d) may impair adequate canal cleaning, disinfection, and filling procedures, and also (e) it displays contradictory results regarding the ability to increase the tooth strengthen compared to the traditional access cavity. In spite of that, it is undeniable that methodological flaws of some benchtop studies using extracted teeth may be responsible for the conflicting data, thus triggering the need for more sophisticated devices/facilities and specifically designed research in an attempt to make it clear the role of the access size/design on long-term teeth survival. Moreover, it is inevitable that a clinical approach like minimal endodontic access cavities that demands complex tools and skilled and experienced operators bring to the fore doubts on its educational impact mainly when confronted with the conflicting scientific output, ultimately provoking a cost-benefit analysis of its implementation as a routine technique. In addition, this review discusses the ongoing scientific and clinical status of minimally invasive access cavities aiming to input an in-depth and unbiased view over the rationale behind them, uncovering not only the related conceptual and scientific flaws, but also outlining future directions for research and clinical practices. The conclusions attempt to skip from passionate disputes highlighting the current body of evidence as weak and incomplete to guide decision making, demanding the development of a close-to-in-situ laboratory model or a large and well-controlled clinical trial to solve this matter.

Guided Endodontics in Root Canals with Complex Access: Two Case Reports

This article reported two clinical cases in which the guided endodontics was used to perform the access to the root canals. The first case presents a 40-year-old female with a history of pain related to the left maxillary canine. After radiographic examination, the presence of severe calcification up to the apical third of the root canal, associated with a periapical radiolucency, was noted. In the second case, an 85-year-old male was referred to our service with pain upon palpation, at the right mandibular first molar. The radiographic images revealed the presence of endodontic treatment and a fiberglass post in the distal root canal, which was associated with extrusion of the filling material and a periapical lesion. The 3D-guides were planned based on cone beam computed tomography and intraoral digital scanning, which were aligned using a specific software. Therefore, implant drills could be guided up to the root canal length required for each case. In the first case, a surgical root canal was created and the patient was free of signs and symptoms after the treatment was completed. In the second case, it was observed that the fiber post was worn by the drill, allowing free access to the filling material. It was possible to perform the endodontic reintervention in a more predictable way and in less time. In both cases, the use of the guided endodontics allowed the preservation of a large part of the dental structure. The procedures were performed faster, without the occurrence of fractures and perforations.

Three-dimensional inlay-guided endodontics applied in variant root canals: A case report and review of literature

BACKGROUND

Root canal retreatment is common after root canal therapy in clinical situations. Especially, completing the retreatment of variant root canals can be challenging. This is particularly true for the molars located at the end of the dental arch. However, advancements in digital dental diagnosis and treatment techniques can solve these problems. Here, we describe a case of a maxillary second molar with a variant distobuccal root canal treated via a novel “inlay-guided endodontics” technique based on improved computer-generated programs.

CASE SUMMARY

A 63-year-old man complained of a defect in the maxillary left second molar. The tooth, diagnosed with post-treatment endodontic disease, was initially treated by conventional methods, which were ineffective. Our “inlay-guided endodontics” technique was subsequently adopted, with the establishment of a precise integrated three-dimensional (3D) plate model of cone-beam computed tomography data and a digital impression of the dentition. An optimal root canal approach was generated for the “virtual file” in the 3D model. The plate data were imported into a 3D printer and printed. With the help of the guide plate, the file was accurately placed into the cervical third of the distal root canal. The root canal and prosthodontic treatments successfully proceeded subsequently.

CONCLUSION

Our newly developed inlay guide plates may facilitate individualized and minimally invasive root canal treatment.

Fiber-reinforced composite post removal using guided endodontics: a case report

Although several techniques have been proposed to remove fiber-reinforced composite (FRC) post, no safe and efficient technique has been established. Recently, a guided endodontics technique has been introduced in cases of pulp canal obliteration. This study describes 2 cases of FRC post removal from maxillary anterior teeth using this guided endodontics technique with a dental operating microscope. Optically scanned data set from plaster cast model was superimposed with the data set of cone-beam computed tomography. By implant planning software, the path of a guide drill was selected. Based on them, a customized stent was fabricated and utilized to remove the FRC post. Employing guided endodontics, the FRC post was removed quickly and safely with minimizing the loss of the remaining tooth structure. The guided endodontics was a useful option for FRC post removal.

Effectiveness of different fiber post removal techniques and their influence on dentinal microcrack formation

OBJECTIVES

The aim of this study was to evaluate the effectiveness of different fiber post removal techniques and to correlate dentinal loss with microcrack formation.

MATERIALS AND METHODS

Forty-five extracted single-rooted teeth were root canal treated and fiber posts were adhesively luted. Specimens were divided into three groups (n = 15) according to the removal technique: long-shaft round bur (EndoTracer #08, Komet, Lemgo, Germany), SonicFlex Endo (KaVo, Biberach, Germany), DT Post Removal Kit (VDW, Munich, Germany). Roots were scanned before post cementation and after post removal using micro-computed tomography. Dentin loss, residual luting material, working time, and the induction of microcracks were assessed. Statistical analysis was performed by using multiple contrast tests (max-t tests, α = 0.05). Correlations between parameters dentin loss/new microcracks and dentin loss/residual material were calculated using Kendall's tau.

RESULTS

Post removal with SonicFlex Endo resulted in the highest amount of removed dentin with significant differences to the round bur and the DT Post Removal Kit. No technique was found to completely remove the post and luting material. All techniques induced microcracks with the DT Post Removal Kit presenting the highest number of new defects. No correlation between dentin loss and new microcracks was observed. Deviations from the original root canal occurred in all groups, but no perforation was observed.

CONCLUSIONS

All techniques resulted in dentin loss, residual luting material, and the formation of microcracks. However, no correlation between dentin loss and the induction of microcracks was observed.

CLINICAL RELEVANCE

As all techniques resulted in microcrack formation and dentin loss, this study emphasizes the risk of iatrogenic damage due to post removal procedures.

Digital Planning on Guided Endodontics Technology

The aim of this review is to discuss the digital planning and the use of guided technology in Endodontics. The complexity of the root canals anatomy and the challenges in the microorganism's control represent risk factors for failure after the infected root canal's treatment. Scientific improvements associated with technological advances have enabled better predictability of therapeutic procedures results. The development of efficient and modern devices provided safer root canal treatments, with shorter clinical visits and greater patient comfort. Digital endodontics incorporated different tools and developed its own, advancing even further in resolving complex cases. The faithful copy of the internal anatomy provided by the advancement of CBCT devices and software's, associated with the digital resources of 3D planning and printing, enabled the advent of guided endodontics. This technique is used at different stages of endodontic treatment, with specific indications and greater result predictability. Therefore, this study critically reviewed the potential clinical application of this guided access technique, and the operative steps for its safe performance in managing complex endodontic cases. The main indications are accessing calcified root canals, performing endodontic surgeries in difficult access areas, removing fiberglass posts, and accessing teeth with developmental anomalies. In summary, guided endodontics has been a precise strategy, effective, safe, and clinically applicable. This procedure represents incorporating technological resources and digital planning in the Endodontist clinical practice, increasing predictability to complex cases.

A bibliometric analysis of the top 100 most-cited case reports and case series in Endodontic journals

AIM

To identify the top 100 most-cited case reports and case series published in Endodontic journals and to analyse their bibliometric characteristics.

METHODOLOGY

The Clarivate Analytics' Web of Science (WoS), Scopus and PubMed databases were used to identify the top 100 most-cited case reports and case series in Endodontic journals. Complete bibliographic records of the selected case reports and case series were exported in plain text or BibTeX format and imported into the R environment for statistical computing and graphics. The following parameters were then analysed: names and affiliations of the authors, title, year of publication, journal of publication, first author, corresponding author, literature cited within reports, language, citation counts, impact factor of the journal, keywords, Keywords Plus and research topic.

RESULTS

In total, 88 case reports and 12 case series published in English between 1977 and 2016 were identified as the most-cited reports in the field of Endodontics. The terms "case report(s)" or "case series" were not included in the title of 57 articles. The number of authors per report ranged from one to seven, with the average number of co-authors per report being 3.14. The most-cited author was M Trope (University of Pennsylvania, USA). The University of Washington and Private Practice, Cetraro, Italy, were the most productive institutions. The country whose case reports received the largest total number of citations was the United States. The largest number of the most-cited reports appeared in 2002, 2004 and 2007 (n = 7, respectively). According to the WoS database, the total number of citations ranged from 42 to 453, with the average number of citations per report being 79.97. The majority of the top 100 most-cited articles were published in the Journal of Endodontics and the International Endodontic Journal. The most frequently used author keywords were revascularization and mineral trioxide aggregate. The majority of the case reports and case series dealt with topics related to pulp regeneration.

CONCLUSION

This bibliometric study provides a comprehensive overview on the progress, trends and current directions in clinical practice within the field of Endodontics.

Guided endodontics: accuracy of access cavity preparation and discrimination of angular and linear deviation on canal accessing ability-an ex vivo study

BACKGROUND

Guided endodontics technique has been introduced for years, but the accuracy in different types of teeth has yet to be assessed. The aim of this study is to evaluate the accuracy of three dimensional (3D)-printed endodontic guides for access cavity preparation in different types of teeth, and to evaluate the predictive ability of angular and linear deviation on canal accessibility ex vivo.

METHOD

Eighty-four extracted human teeth were mounted into six jaw models and categorised into three groups: anterior teeth (AT), premolar (P), and molar (M). Preoperative cone beam computed tomography (CBCT) and surface scans were taken and matched using implant planning software. Virtual access cavity planning was performed, and templates were produced using a 3D printer. After access cavities were performed, the canal accessibility was recorded. Postoperative CBCT scans were superimposed in software. Coronal and apical linear deviations and angular deviations were measured and evaluated with nonparametric statistics. The receiver operating characteristic (ROC) curve was used to evaluate the predictive ability of angular and linear deviation for canal accessibility in SPSS v20.

RESULTS

A total of 117 guided access cavities were created and 23 of them were record as canal inaccessibility, but all canals were accessible after canal negotiation. The average linear deviation for all groups was 0.13 ± 0.21 mm at coronal position, 0.46 ± 0.4 mm at apical position, and 2.8 ± 2.6° in angular deviation. At the coronal position, the linear deviations of the AT and P groups were significantly lower than M group deviation (P < 0.05), but no statistically significant difference between AT group and P group. The same results were found in linear deviation at the apical position and in angular deviation. The area under the ROC curve was 0.975 in angular deviation, 0.562 in linear deviation at the coronal position, and 0.786 at the apical position. Statistical significance was noted in linear deviation at the apical position and in angular deviation (P < 0.001).

CONCLUSIONS

In conclusion, this study demonstrated that the accuracy of access cavity preparation with 3D-printed endodontic guides was acceptable. The linear and angular deviations in the M group were significantly higher than those in the other groups, which might be caused by the interference of the opposite teeth. Angular deviation best discriminated the canal access ability of guided access cavity preparation.

Limitations and Management of Static-guided Endodontics Failure

Endodontic treatment in severely calcified canals is always a challenging task because it can result in accidents such as deviations or perforations. Recently, guided endodontics has become an alternative approach for pulp canal calcification, facilitating the location of root canals more predictably through the combined use of cone-beam computed tomographic imaging, oral scanning, and endodontic access guides. Although several reports have shown that guided endodontics is safer, faster and can be performed without an operating microscope and by less experienced operators, the technique has limitations, and iatrogenesis may occur. This article describes the limitations of static-guided endodontics and possible causes of failures. In the present case, not fixing the guide to the bone and inaccuracies generated by manually performing mesh merger software led to root perforation. Endodontic microsurgery was effective in resolving this case and should be considered the treatment of choice when guided endodontics cannot be used safely or when it fails.

Management of Pulp Canal Obliteration-Systematic Review of Case Reports

Background and Objectives: This systematic review aimed to assess the literature focusing on the clinical management of traumatized teeth with Pulp Canal Obliteration (PCO) and propose an updated clinical decision-making algorithm. The present review follows the PRISMA guidelines and was registered on PROSPERO database (CRD42020200656). Materials and Methods: An electronic search strategy was performed in Pubmed, EBSCOhost and LILACS from inception to March 2021. Only anterior permanent teeth with PCO due to dental trauma were included. Regarding clinical approaches, only teeth managed with a “watchful waiting” approach, tooth bleaching or root canal treatment (RCT) were included. Quality assessment was performed using the JBI Critical Appraisal Tool for Case Reports. Results: Twenty case reports were selected, resulting in a total of 27 patients. The number of traumatized teeth diagnosed with PCO was 33. The “watchful waiting” approach was the most implemented clinical strategy. Discolored non-symptomatic PCO teeth were mostly managed with external bleaching. The prevalence of pulp necrosis (PN) was 36.4%. For teeth diagnosed with PN, non-surgical RCT was performed in 10 teeth and surgical RCT in one tooth. Guided endodontic technique was performed in six of those teeth. Conclusions: For discolored non-symptomatic PCO teeth, external bleaching is advocated and the RCT approach should not be implemented as a preventive intervention strategy. Symptomatic PCO teeth should follow regular endodontic treatment pathways. Clinical approach of teeth with PCO should follow a decision-making algorithm incorporating clinical and radiographic signs and patient-reported symptoms.

Traditional and minimally invasive access cavities in endodontics: a literature review

The aim of this review was to evaluate the effects of different access cavity designs on endodontic treatment and tooth prognosis. Two independent reviewers conducted an unrestricted search of the relevant literature contained in the following electronic databases: PubMed, Science Direct, Scopus, Web of Science, and OpenGrey. The electronic search was supplemented by a manual search during the same time period. The reference lists of the articles that advanced to second-round screening were hand-searched to identify additional potential articles. Experts were also contacted in an effort to learn about possible unpublished or ongoing studies. The benefits of minimally invasive access (MIA) cavities are not yet fully supported by research data. There is no evidence that this approach can replace the traditional approach of straight-line access cavities. Guided endodontics is a new method for teeth with pulp canal calcification and apical infection, but there have been no cost-benefit investigations or time studies to verify these personal opinions. Although the purpose of MIA cavities is to reflect clinicians' interest in retaining a greater amount of the dental substance, traditional cavities are the safer method for effective instrument operation and the prevention of iatrogenic complications.

Real-Time Guided Endodontics with a Miniaturized Dynamic Navigation System Versus Conventional Freehand Endodontic Access Cavity Preparation: Substance Loss and Procedure Time

INTRODUCTION

This study aimed to evaluate substance loss and the time required for access cavity preparation (ACP) using the conventional freehand method (CONV) versus a miniaturized dynamic navigation system of real-time guided endodontics (RTGE) in an in vitro model using 3-dimensional-printed teeth.

METHODS

Nine human anterior maxillary teeth were selected and micro-computed tomographic scanned. Root canals were virtually reduced to 2 mm below the cementoenamel junction. The teeth were digitally duplicated and mirrored to yield 6 different models with 6 single-rooted teeth each. The models were 3-dimensionally printed using radiopaque resin and consecutively mounted on a dental mannequin for ACP. Two operators with 12 and 2 years of clinical experience, respectively, received 6 models (36 teeth) each and performed ACP on half of the models using RTGE (after digital planning) and CONV on the other half 2 weeks later. The time was recorded. Postoperative substance loss was measured by cone-beam computed tomographic imaging. The differences in time and substance loss between the methods and operators were evaluated by the t test.

RESULTS

Overall, substance loss was significantly lower with RTGE than CONV (mean = 10.5 mm³ vs 29.7 mm³), but both procedures took a similar time per tooth (mean = 195 vs 193 seconds). Operator 1 (more experienced) achieved significantly less substance loss than operator 2 with CONV (mean = 19.9 vs 39.4 mm³) but not with RTGE (mean = 10.3 vs 10.6 mm³).

CONCLUSIONS

RTGE is a practicable, substance-sparing method performed in comparable time as CONV. Moreover, RTGE seems to be independent of operator experience.