In vitroassessment of the tooth staining potential of endodontic materials in a bovine tooth model

Clinical and radiographic evaluation of NeoMTA versus conventional white mineral trioxide aggregate in revascularization of non-vital immature permanent anterior teeth (A randomized controlled trial)

OBJECTIVE

To evaluate and compare clinically and radiographically the effect of using two different coronal plug materials (NeoMTA versus Conventional White mineral trioxide aggregate) in revascularization of non-vital immature permanent anterior teeth, with special reference to the assessment and evaluation of discoloration potential over a period of one year.

METHODS

Revascularization procedure was performed in (30) immature permanent non-vital anterior teeth which were randomly allocated to two equal groups (n = 15). NeoMTA was used as coronal plug material in the Experimental Group (N), while conventional White mineral trioxide aggregate (WMTA) was used as a coronal plug material in the Control Group (W). All treated teeth were evaluated clinically at 1 week, 1, 3, and 12 months and radiographically at 12 months.

RESULTS

The overall clinical and radiographic success rate of Groups (N) and (W) at the end of the 12-month follow-up period was 100%. The discoloration was detected in a single tooth (9.1%) in Group (N) and three teeth (27.3%) in Group (W) but the difference between groups was not statistically significant.

CONCLUSIONS

Both NeoMTA and conventional WMTA were successful coronal plug materials in the revascularization of non-vital immature permanent teeth achieving a high level of clinical and radiographic success. NeoMTA is a promising coronal plug material that can be used for revascularization procedures in the esthetic zone as it showed less discoloration potential compared with conventional WMTA, however, there was no statistically significant difference between both materials.

Effect of calcium silicate-based endodontic sealers on tooth color: A 3-year in vitro experimental study

Objective

To analyze the change in tooth color produced by two hydraulic and one resin-based sealers by means of spectrophotometry for 3 years.

Methods

Forty maxillary anterior teeth were selected (n = 10 per group). Root canals were prepared by rotary instrumentation and irrigation was performed with NaOCl, which was also used in the final irrigation, followed by saline and activated with Endoactivator. Root canals were then filled using single cone technique. Negative control (NC): gutta-percha filling; Positive control: gutta-percha and AH Plus; experimental groups: gutta-percha and Bioroot RCS/TotalFill BC Sealer. Gutta-percha was cut 2 mm below the cementoenamel junction, the pulp chamber was sealed with flowable composite. The teeth were kept in PBS. Color was measured in the cervical and incisal halves before root canal treatment (RCT), one and six months after RCT, and after one, two and three years, with the Vita EasyShade spectrophotometer; positioned using an individualized splint. ΔE_ab and ΔE₀₀ were calculated. Two-way ANOVA repeated measures test followed by Bonferroni post-test were performed to analyze the ΔL, Δa*, Δb*, ΔE_ab, and ΔE₀₀, considering treatment groups and evaluation periods. Statistical significance was set at p < 0.05.

Results

In the incisal half, in decreasing order of darkening, the groups at three years were ordered according to the ΔE_ab: AH Plus > NC > TotalFill > Bioroot. ΔE₀₀ values were: 1.38 ± 0.61 NC, 2.37 ± 0.70 AH Plus, 1.86 ± 0.60 BioRoot and 1.53 ± 0.85 TotalFill. In the cervical half, the ΔE_ab values, showed the same descending order, except for Bioroot and TotalFill which alternated the order. The ΔE₀₀ values were 1.86 ± 0.61 NC, 3.01 ± 0.70 AH Plus,1.89 ± 0.58 Bioroot and 1.65 ± 0.41 TotalFill, with no significant differences between groups and times in both locations.

Conclusions

All groups presented some degree of discoloration. Lightness and b* component were the most influential. Calcium silicate-based cements (Bioroot RCS and TotalFill BC Sealer) produced acceptable levels of discoloration at the end of follow-up.

Expert consensus on regenerative endodontic procedures

Regenerative endodontic procedures (REPs) is a biologic-based treatment modality for immature permanent teeth diagnosed with pulp necrosis. The ultimate objective of REPs is to regenerate the pulp-dentin complex, extend the tooth longevity and restore the normal function. Scientific evidence has demonstrated the efficacy of REPs in promotion of root development through case reports, case series, cohort studies, and randomized controlled studies. However, variations in clinical protocols for REPs exist due to the empirical nature of the original protocols and rapid advancements in the research field of regenerative endodontics. The heterogeneity in protocols may cause confusion among dental practitioners, thus guidelines and considerations of REPs should be explicated. This expert consensus mainly discusses the biological foundation, the available clinical protocols and current status of REPs in treating immature teeth with pulp necrosis, as well as the main complications of this treatment, aiming at refining the clinical management of REPs in accordance with the progress of basic researches and clinical studies, suggesting REPs may become a more consistently evidence-based option in dental treatment.

Effectiveness of Teeth Whitening after Regenerative Endodontics Procedures: An In Vitro Study

Discolouration resulting from regenerative endodontic procedures may have a negative impact on the quality of life of treated patients; therefore, it is recommended to minimize this risk by selecting appropriate scaffolds and barrier materials, and if discolouration occurs, the use of a simple, cost-effective and minimally invasive technique, such as whitening, should be considered. This in vitro study aimed to evaluate tooth discolouration after two- and single-visit regenerative endodontic procedures and the effectiveness of subsequent whitening procedures with carbamide peroxide. Two hundred bovine incisors were included in this study and divided into twenty groups based on the tested material combinations. Two groups were control groups, one with saline and the other group with blood. In the 12 groups, the experiment was designed to be consistent with the two-visit regenerative endodontic procedures. Triple antibiotic paste or calcium hydroxide were placed in the root canal, and then scaffolds (e.g., blood or platelet-rich fibrin) and barrier materials (Biodentine, OrthoMTA or MTA Repair HP) were applied after rinsing the disinfectant pastes. In the six groups that corresponded to the single-visit regenerative endodontic procedure, the use of a disinfectant paste was omitted. Subsequently, the specimens were bleached twice with carbamide peroxide at a 7-day interval. Colour change measurements were performed using a spectrophotometer (VITA Easyshade Compact 5.0, VITA Zahnfabrik, Bad Säckingen, Germany). Statistical analysis was performed with the Kruskal−Wallis H test, the independent t-test and t-test for related samples. Tooth discolouration was noticed after two- and single-visit regenerative endodontic procedures, except for the platelet-rich fibrin+MTA Repair HP group. After the first and second whitening procedures, all of the tested two- and single-visit regenerative endodontic procedures groups showed a change in the colour of the crown, which was noticeable to the naked eye (∆E > 3.3). When analysing the ∆E value between the first and second bleaching procedures, no changes in the colour of teeth were visually noticed in the calcium hydroxide and platelet-rich fibrin +MTA Repair HP groups (∆E < 3.3). Single-visit regenerative endodontic procedures are suggested if possible; however, if two-visit regenerative endodontic procedures are performed, it is recommended to use calcium hydroxide as the disinfectant paste because of the lower staining potential. In the context of discolouration, platelet-rich fibrin is advisable for use as a scaffold. The whitening procedure is worth considering, but does not guarantee a return to the original tooth colour, especially when triple antibiotic paste is used.

A Breakthrough in the Era of Calcium Silicate-Based Cements: A Critical Review

Calcium silicate-based cements (CSCs) or mineral trioxide aggregate (MTA) lookalike materials are blocks of cement or root canal sealers produced from calcium (Ca) and silicate. They have superior sealing ability, bioactivity, and marginal adaptability, making them appropriate for various dental treatment applications. Mineral trioxide aggregate is widely used in numerous endodontic repair techniques. The capacity of this cement to promote tissue regeneration and stimulate mineralization accounts for its widespread usage in pulp capping, apexification, apical surgeries, and revascularization. Several studies have been conducted to investigate changes in the components of MTA-based types of cement directed to improve their presentation clinically. To improve flowability, new Ca silicate-based formulations have been introduced commercially. In these new formulations, essential features such as adequate radiopacity and setting time, color stability, alkaline pH, and calcium ion release and biocompatibility must be considered. Owing to an increased range of indications of CSCs, including some for restorative dentistry, and with the emergence of novel silicate calcium-based materials with considerable changes in their compositions, it is necessary to examine the available scientific literature that evaluates their usage in these applications. Therefore, this review paper aims to assess the existing knowledge of CSCs, emphasizing their potential uses in restorative and endodontic dentistry. This report strives to update doctors' understanding of CSCs, allowing for a better therapeutic approach.

Present status and future directions: Hydraulic materials for endodontic use

BACKGROUND

Hydraulic materials are used in Endodontics due to their hydration characteristics namely the formation of calcium hydroxide when mixing with water and also because of their hydraulic properties. These materials are presented in various consistencies and delivery methods. They are composed primarily of tricalcium and dicalcium silicate, and also include a radiopacifier, additives and an aqueous or a non-aqueous vehicle. Only materials whose primary reaction is with water can be classified as hydraulic.

OBJECTIVES

Review of the classification of hydraulic materials by Camilleri and the literature pertaining to specific uses of hydraulic cements in endodontics namely intra-coronal, intra-radicular and extra-radicular. Review of the literature on the material properties linked to specific uses providing the current status of these materials after which future trends and gaps in knowledge could be identified.

METHODS

The literature was reviewed using PUBMED, and for each clinical use, the in vitro properties such as physical, chemical, biological and antimicrobial characteristics and clinical data were extracted and evaluated.

RESULTS

A large number of publications were retrieved for each clinical use and these were grouped depending on the property type being investigated.

CONCLUSIONS

The hydraulic cements have made a difference in clinical outcomes. The main shortcoming is the poor testing methodologies employed which provide very limited information and also inhibits adequate clinical translation. Furthermore, the clinical protocols need to be updated to enable the materials to be employed effectively.

A critical analysis of research methods and experimental models to study tooth discolouration from endodontic materials

As a range of materials used in endodontics may cause tooth discolouration, exploration of factors responsible for the darkening of the tooth crown or root is warranted. This narrative review paper discusses the range of technical factors that apply in laboratory studies that assess endodontic discolouration. As an example of how these factors operate, particular examples relating to discolouration caused by endodontic medicaments containing tetracycline antibiotics are used. Following the PRILE 2021 guidelines approach, a summary of key variables to be addressed in the methodology for laboratory studies is presented, to inform future work.

Portland Cement: An Overview as a Root Repair Material

Portland cement (PC) is used in challenging endodontic situations in which preserving the health and functionality of pulp tissue is of considerable importance. PC forms the main component of mineral trioxide aggregate (MTA) and demonstrates similar desirable properties as an orthograde or retrograde filling material. PC is able to protect pulp against bacterial infiltration, induce reparative dentinogenesis, and form dentin bridge during the pulp healing process. The biocompatibility, bioactivity, and physical properties of PC have been investigated in vitro and in animal models, as well as in some limited clinical trials. This paper reviews Portland cement's structure and its characteristics and reaction in various environments and eventually accentuates the present concerns with this material. This bioactive endodontic cement has shown promising success rates compared to MTA; however, considerable modifications are required in order to improve its characteristics and expand its application scope as a root repair material. Hence, the extensive chemical modifications incorporated into PC composition to facilitate preparation and handling procedures are discussed. It is still important to further address the applicability, reliability, and cost-effectiveness of PC before transferring into day-to-day clinical practice.

Effect of hydrogel-based antibiotic intracanal medicaments on crown discoloration

Objectives

This study evaluated the effects of low and moderate concentrations of triple antibiotic paste (TAP) and double antibiotic paste (DAP) loaded into a hydrogel system on crown discoloration and explored whether application of an adhesive bonding agent prevented crown discoloration.

Materials and Methods

Intact human molars (n = 160) were horizontally sectioned 1 mm apical to the cementoenamel junction. The crowns were randomized into 8 experimental groups (calcium hydroxide, Ca[OH]₂; 1, 10, and 1,000 mg/mL TAP and DAP; and no medicament. The pulp chambers in half of the samples were coated with an adhesive bonding agent before receiving the intracanal medicament. Color changes (ΔE) were detected by spectrophotometry after 1 day, 1 week, and 4 weeks, and after 5,000 thermal cycles, with ΔE = 3.7 as a perceptible threshold. The 1-sample t-test was used to determine the significance of color changes relative to 3.7. Analysis of variance was used to evaluate the effects of treatment, adhesive, and time on color change, and the level of significance was p < 0.05.

Results

Ca(OH)₂ and 1 and 10 mg/mL DAP did not cause clinically perceivable tooth discoloration. Adhesive agent use significantly decreased tooth discoloration in the 1,000 mg/mL TAP group up to 4 weeks. However, adhesive use did not significantly improve coronal discoloration after thermocycling when 1,000 mg/mL TAP was used.

Conclusions

Ca(OH)₂ and 1 and 10 mg/mL DAP showed no clinical discoloration. Using an adhesive significantly improved coronal discoloration up to 4 weeks with 1,000 mg/mL TAP.

Present status and future directions: Endodontic management of traumatic injuries to permanent teeth

The prognosis of traumatized teeth depends largely on the fate of the pulp and its treatment. This review aims to update the present status on the endodontic management of traumatic injuries to permanent teeth and to identify relevant research areas that could contribute to an improvement in diagnosis and treatment of traumatized permanent teeth. Future research should pay greater attention to (1) diagnostic methods to assess the perfusion of the pulp and enhance detection of tooth cracks and initial signs of root resorption; (2) improved materials for vital pulp treatment; (3) studies focusing on type and duration of splinting after root fractures; (4) antiresorptive intracanal medication in case of posttraumatic pulp necrosis and infection-related resorption and (5) long-term data on the apical barrier technique compared to revitalization.

Vital Pulp Therapy in Aesthetic Zone-Identifying the Biomaterial That Reduces the Risk of Tooth Discolouration

Calcium silicate-based cements are biocompatible materials for vital pulp therapy. However, they discolour the tooth tissue, which is important for the aesthetics of the anterior teeth. The aim of this study was to investigate the effect of calcium silicate-based cements on tooth discolouration. The study included 70 extracted bovine incisors. The crown of the tooth was cut off from the root, 2 mm below the cement-enamel junction. The pulp tissue was removed via a cervical cut with a barbed broach. The teeth were randomly divided into five experimental, one positive, and one negative control groups. The evaluated materials included Biodentine, Ortho MTA, Retro MTA, MTA Plus, MTA Repair HP, and in the positive group, ProRoot MTA. A VITA Easyshade Compact 5.0 spectrophotometer was used before the application, after 1 week, 1 month, 3 months, and 6 months. The significance levels were set at p < 0.05. All materials significantly changed the teeth colour (p < 0.05). However, Ortho MTA, ProRoot MTA, MTA Plus, and Biodentine (ΔE > 6) caused maximum colour change after 6 months. While the ProRoot MTA, Ortho MTA, and MTA Plus caused grey discolouration, Biodentine darkened the shade of the base colour. Thus, Retro MTA and MTA Repair HP can be safely used in the aesthetic dentition zone. According to these clinical results, the possibility of using Biodentine, due to its lack of gray discoloration, can be considered.

Tooth discoloration induced by apical plugs with hydraulic calcium silicate-based cements in teeth with open apices-a 2-year in vitro study

Objectives

To assess tooth discoloration induced by different hydraulic calcium silicate-based cements (HCSCs), including effects of blood and placement method.

Materials and methods

Eighty bovine teeth cut to a length of 18 mm (crown 8 mm, root 10 mm) were randomly assigned to 10 groups (n = 8), receiving orthograde apical plug treatment (APT). Apical plugs were 4 mm in length and made of ProRoot MTA (Dentsply), Medcem MTA (Medcem), TotalFill BC RRM Fast Set Putty (Brasseler), or Medcem Medical Portland Cement (Medcem) plus bismuth oxide (Bi2O3) with and without bovine blood. Further, orthograde (with or without preoperative adhesive coronal dentin sealing) and retrograde APT were compared. Teeth were obturated with gutta-percha and sealer, sealed with composite and stored in distilled water. Tooth color was measured on apical plug, gutta-percha/sealer, and crown surface before treatment versus 24 h, 1, 3, 6, 12, and 24 months after treatment by spectrophotometry. Color difference (ΔE) values were calculated and analyzed by Shapiro–Wilk test, ANOVA with post hoc tests, Friedman test, t test, and post hoc tests with Bonferroni correction (α = .05).

Results

Tooth discoloration occurred in all groups with no significant differences between HCSCs (p > .05). After 24 months, color changes were prominent on roots but insignificant on crowns. Blood contamination induced a significantly decreased luminescence (p < .05). Blood had a stronger impact on tooth color than Bi₂O₃. No relevant effects of retrograde placement (p > .05) or preoperative dentin sealing (p > .05) were detected.

Conclusions

Apical plugs of the tested HCSCs cause discoloration of bovine roots, but not discoloration of bovine tooth crowns within a 24-month period.

Clinical relevance

APT should be performed carefully while avoiding direct contact with the coronal dentin, and in that case no aesthetic impairments occur.

Endodontic management of traumatized permanent teeth: a comprehensive review

The pulp plays a key role in the treatment of traumatic dental injuries (TDIs) and is strongly associated with the outcome, particularly in severe cases. A correct pulp diagnosis is essential as it forms the basis for developing the appropriate management strategy. However, many TDIs are complex, and their treatment requires a profound knowledge of the physiological and pathological responses of the affected tissues. This comprehensive review will look at the dentine-pulp complex and its interaction with the surrounding tissues following TDIs. The literature up to 2020 was reviewed based on several searches on PubMed and the Cochrane Library using relevant terms. In addition to the recently revised guidelines of the International Association of Dental Traumatology, this article aims to provide background information with a focus on endodontic aspects and to gather evidence on which a clinician can make decisions on the choice of the appropriate endodontic approach for traumatized permanent teeth.

A Contemporary Treatment of an Iatrogenic Root Perforation: A Case Report

Pulp canal calcification is 1 of the possible outcomes after certain types of dental trauma. This can make endodontic treatment more challenging should it become necessary. Because of the increased degree of difficulty, sometimes procedural incidents do occur during root canal treatment. This case report demonstrates an unusual clinical presentation of a root perforation and missed canal, which had undergone calcification as a result of trauma some years earlier. A contemporary approach to treatment involved a combination of treating the biological complication of the calcified canal combined with surgical repair of the iatrogenic complication of a perforation using modern imaging techniques and materials.

Antibacterial efficacy and discolouration potential of antibiotic pastes with macrogol for regenerative endodontic therapy

This study aimed to evaluate the antibacterial efficacy and discolouration potential of antibiotic pastes containing macrogol. Seventy single-rooted teeth were contaminated with a culture of Enterococcus faecalis for 30 days. Double (DAP) and triple antibiotic pastes (TAP) containing propylene glycol or macrogol as vehicles were applied. After 15 days, bacterial viability was compared. Change in teeth coronal colour was measured by a spectrophotometer. Statistical analysis was performed using anova and Tukey's test (P < 0.05). TAP containing clindamycin and propylene glycol was the only medicament that led to the presence of contamination, while the same combination of antibiotics containing macrogol did not result in bacterial growth (P < 0.05). Only the pastes containing minocycline in formulation resulted in coronal discolouration (P < 0.05). Both DAPs evaluated and the TAP containing clindamycin and macrogol showed to be the preferable options for regenerative endodontic therapy, as they were effective against E. faecalis biofilm and did not promote tooth discolouration.

Spectrophotometric insights: calcium hydroxide influences tooth discolorations induced by short-term application of antibiotic/corticosteroid pastes

OBJECTIVES

This in vitro study aimed to assess the influence of a calcium hydroxide dressing regarding the relative color change (ΔE) of enamel-dentin specimens previously exposed to antibiotic/corticosteroid pastes.

MATERIALS AND METHODS

Eighty bovine enamel-dentin specimens with a cylindrical central cavity were randomly allocated to four groups: NEG (empty), POS (blood), LED (Ledermix), and ODO (Odontopaste) (n = 20 each). The materials were applied and sealed with self-adhesive resin luting material. After 3 weeks, the materials were removed and a calcium hydroxide (Ca(OH)₂) dressing was placed in all cavities. After a further 3-week storage period, the cavities were restored with resin-based composite. Spectrophotometric color measurements were taken over 6 months, and ΔE values were calculated. A Tukey's multiple comparison test was performed to assess significant differences within the treatment groups (p < 0.05).

RESULTS

Tooth discolorations were present after 3 weeks in LED (ΔE 29.14 ± 6.55) and POS (ΔE 18.05 ± 7.03); NEG and ODO remained color stable (ΔE 3.2 ± 1.36 and ΔE 2.3 ± 1.16). The 3-week Ca(OH)₂ dressing decreased discolorations of POS (ΔE 15.93 ± 6.63; p = 0.37), whereas LED showed a further significant increase (ΔE 39.55; p < 0.0001). Between the end of the Ca(OH)₂ dressing and the final restoration no significant color changes were observed in any group (p > 0.9).

CONCLUSIONS

Discolorations induced by LED progressed during the Ca(OH)₂ dressing despite careful removal of all residues.

CLINICAL RELEVANCE

Calcium hydroxide might negatively affect the discoloring potential of Ledermix. This highlights the need for direct intracanal application methods of Ledermix ensuring a material-free access cavity or alternative antibiotic/corticosteroid pastes such as Odontopaste should be used.

Materials used in regenerative endodontic procedures and their impact on tooth discoloration

There is some evidence of tooth discoloration after regenerative endodontic procedures. The aim of this review is to determine which materials used in regenerative procedures induce tooth discoloration. The authors searched six digital databases in February 2018: PubMed, Google Scholar, the Cochrane Library, Scopus, Web of Science, and Lilacs. As a result, 353 studies were found. Eleven studies that met the established criteria were selected. Analysis of the selected studies showed that most materials used in regenerative endodontic procedures have the potential to stain tooth tissues. To decrease tooth discoloration, sealing dentin with a dentin-bonding agent before the placement of a disinfectant paste and barrier materials should be considered. Only a small number of in vitro studies have been performed; therefore, further studies on this topic are warranted.

Bovine Tooth Discoloration Induced by Endodontic Filling Materials for Primary Teeth

Objective. This study evaluated the discoloration potential of endodontic materials used in primary teeth. Material and Methods. Dentine-enamel blocks were prepared from 75 bovine teeth, assorted in five experimental groups (n = 15). The tested materials included an MTA-based material; zinc oxide and eugenol cement (ZOE); Vitapex; and calcium hydroxide thickened with zinc oxide (Calen + ZO). The color measurements were performed using a spectrophotometer at the following intervals: prior to (T0) and after placement of the filling (T1) and after 1 week (T2), 1 month (T3), 3 months (T4), 6 months (T5), and 9 months (T6). Data were submitted to ANOVA with repeated measures and Tukey's test. Results. The time had a significant effect on the color variation (ΔE₀₀^⁎) (p < 0.0001). The effect of the materials on the color variation (ΔE₀₀^⁎) was statistically significant (p = 0.004). Interactions between time and materials demonstrated a significant effect on the values (ΔE₀₀^⁎) (p < 0.0001). The ZOE cement showed the highest darkening effect (p = 0.018). Conclusion. The MTA-based material showed the smallest discoloration during the experimental time; however, it was similar to the other materials and to the control group. Zinc oxide and eugenol showed higher discoloration.