Intensity and duration of in-vitro antibacterial activity of different adhesives used in orthodontics

The Impact of Orthodontic Adhesive Containing Resveratrol, Silver, and Zinc Oxide Nanoparticles on Shear Bond Strength: An In Vitro Study

Introduction The goal of orthodontic treatment is to provide patients with esthetic smiles and functional occlusion. Despite best efforts and continuous evolution of materials, white spot lesions present a persistent hindrance to the desired treatment outcome. Nanoparticles have shown efficacy in reducing microbial activity; however, currently, there is a need for natural anti-cariogenic compounds with minimal side effects. Resveratrol is a natural compound belonging to the polyphenol group and has shown promising anti-microbial efficacy. This study aimed to evaluate the influence of dentin bonding agents incorporated with the following three different nanoparticles on shear bond strength: silver nanoparticles (Ag-Np), zinc oxide nanoparticles (ZnO-Np), and resveratrol nanoparticles (RSV-Np). Materials and methods A total of 40 premolar teeth therapeutically extracted were assigned to four equal groups of n=10 each. Groups 1, 2, and 3 used experimental adhesives doped with silver, zinc oxide, and resveratrol nanoparticles, respectively. Group 4 was bonded using unmodified adhesive. The bonded teeth were then subjected to shear bond strength (SBS) testing which was measured using a Universal Testing Machine (model no. UNITEST-10; Pune, India: ACME Engineers). Statistical analyses were performed using SPSS version 21 (Armonk, NY: IBM Corp.), employing one-way ANOVA and Tukey's post-hoc test for pairwise comparisons. Results Shear bond strength testing revealed that the control group with unmodified adhesive (8.6 MPa) had the highest SBS, followed by RSV-Np (7.6 MPa), Ag-Np (6.3 MPa), and ZnO-Np (5.65 MPa). Although the experimental groups demonstrated decreased SBS compared to the control, the values for Ag-Np and RSV-Np fell within the acceptable range. Conclusion Resveratrol nanoparticles had the least impact on shear bond strength among the experimental groups. These findings suggest that the incorporation of resveratrol nanoparticles in dentin bonding agents can provide anti-cariogenic effect without significantly impacting the adhesive's mechanical properties thereby providing a new and promising alternative to synthetic nanoparticles. Further studies are recommended to optimize the balance between anti-microbial efficacy and bond strength in clinical applications.

Comparison of microbial adhesion and biofilm formation on orthodontic wax materials; an in vitro study

Background/purpose

Orthodontic wax materials are available on the dental market and are given by orthodontists due to pain, sores and irritation caused by treatment. The aim of the study was to compare biofilm formation and microbial adhesion at different time points on different protective materials used against orthodontic wounds in vitro.

Materials and methods

Microbial adhesion and biofilm formation were evaluated against Streptococcus mutans ATCC 25175 and Lactobacillus acidophilus ATCC 4356 standard strains on orthodontic wax materials at the 0, 24th, 48th, 72nd, 96th and 120th hour. The Kruskal Wallis test and Bonferroni test were used for statistical evaluations. Statistical significance was set at p < 0.05.

Results

It was observed that S. mutans formed statistically significantly more biofilm on OrthoDots®CLEAR (OrVance) than Ora-Aid (TBM Corporation) at the 48th hour (p < 0.05). Furthermore, L. acidophilus formed statistically significantly more biofilm on OrthoDots®CLEAR (OrVance) than Brace Gard®(Infa-Lab Inc.) at the 72nd, 96th and 120th hours (p < 0.05).

Conclusion

Significant differences were noted among the different orthodontic wax materials and both S. mutans and L. acidophilus created biofilm on all waxes at different time points in vitro. To prevent biofilm formation, these waxes need to be refreshed and should not be used for more than 24 h. According to our study, biofilm production performances of pathogens on Brace Gard®(Infa-Lab Inc.) are minimal and therefore it may be a better option to use in clinics. However, to our knowledge, this is the first study investigating biofilm formation on waxes and more studies are needed in this field.

In vitro anticariogenic and antibiofilm activities of toothpastes formulated with essential oils

OBJECTIVE

This study aimed to assess the antibacterial and antibiofilm effects of essential oils and herbal toothpastes against bacteria associated with oral diseases.

METHODS

The minimum inhibitory concentration (MIC) and antibiofilm activity of 13 essential oils against Staphylococcus aureus, Streptococcus mutans, Lactobacillus lactis, and Enterococcus faecalis. were determined. Toothpastes were formulated with different concentrations of the most active essential oils, alone and in combination, and evaluated for antibacterial and antibiofilm activities.

RESULTS

Clove, oregano, thyme, and cinnamon essential oils were effective in inhibiting all bacterial strains. The antibacterial activity of cinnamon essential oil was similar to that of the control (0.12 % chlorhexidine gluconate mouthwash). Cinnamon essential oil was a strong inhibitor of S. mutans growth. The antibiofilm activity of clove, oregano, thyme, and cinnamon essential oils at 1, 2, and 4 × MIC against S. mutans did not differ from that of the control. In the hole-plate diffusion assay, 17 out of the 18 tested toothpastes produced an inhibition halo at least half as large as that of the control. Toothpastes containing clove, clove and oregano, or clove, oregano, thyme, and cinnamon essential oils were able to completely disrupt S. mutans biofilms, not differing from the control. Thyme essential oil was found to act synergistically with chlorhexidine against S. mutans.

CONCLUSIONS

The results indicate that clove, oregano, thyme, and cinnamon essential oils may be added to fluoride-free toothpastes to enhance inhibitory effects against bacteria associated with cavities and periodontal disease. Thyme essential oil may increase the efficiency of chlorhexidine-containing dentifrices.

Zinc-Containing Hydroxyapatite Enhances Cold-Light-Activated Tooth Bleaching Treatment In Vitro

Cold-light bleaching treatment has grown to be a popular tooth whitening procedure in recent years, but its side effect of dental enamel demineralization is a widespread problem. The aim of this study was to synthesize zinc-substituted hydroxyapatite as an effective biomaterial to inhibit demineralization or increase remineralization. We synthesized zinc-substituted hydroxyapatite containing different zinc concentrations and analysed the product using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and energy dispersive spectrometer (EDS). The biological assessment of Zn-HA was conducted by CCK-8 assay and bacterial inhibition tests. pH cycling was performed to estimate the effect of Zn-HA on the enamel surface after cold-light bleaching treatment. The XRD, FTIR, and EDS results illustrated that zinc ions and hydroxyapatite combined in two forms: (1) Zn²⁺ absorbed on the surface of HA crystal and (2) Zn²⁺ incorporated into the lattice of HA. The results indicated that 2% Zn-HA, 4% Zn-HA, and 8% Zn-HA effectively inhibited the growth of bacteria yet showed poor biocompatibility, whereas 1% Zn-HA positively affected osteoblast proliferation. The XRD and scanning electron microscopy (SEM) results showed that the use of Zn-HA in pH cycling is obviously beneficial for enamel remineralization. Zinc-substituted hydroxyapatite could be a promising biomaterial for use in cold-light bleaching to prevent enamel demineralization.

Addition of ammonium-based methacrylates to an experimental dental adhesive for bonding metal brackets: Carious lesion development and bond strength after cariogenic challenge

INTRODUCTION

In this study, we evaluated the caries inhibition and shear bond strength achieved with the addition of the antibacterial monomer [2-(Methacryloyloxy)ethyl] trimethylammonium chloride (MADQUAT) to an adhesive used to bond orthodontic brackets.

METHODS

Experimental adhesives were formulated with addition of 0% (control), 5%, or 10% MADQUAT followed by measurement of the degree of conversion. These adhesives were used to lute brackets to the enamel of premolars (n = 30). Biofilm from a microcosm model was cultivated in half of the specimens under cariogenic challenge for 5 days. The brackets were subjected to a shear bond strength test followed by measurement of the internal hardness of the enamel around the brackets to calculate the integrated mineral loss.

RESULTS

The addition of MADQUAT slightly increased the degree of conversion. Adhesive containing 10% MADQUAT significantly reduced the integrated mineral loss around the bracket but also resulted in the lowest values of bond strength. No effects on bond strength and integrated mineral loss were observed with the addition of 5% MADQUAT to the adhesive. The cariogenic challenge did not affect the bond strength and the failure mode.

CONCLUSIONS

MADQUAT was effective to reduce the integrated mineral loss only when added to the adhesive at a concentration of 10% despite the reduction of bond strength.

Antibacterial Activity and Bonding Ability of an Orthodontic Adhesive Containing the Antibacterial Monomer 2-Methacryloxylethyl Hexadecyl Methyl Ammonium Bromide

Irreversible white spot lesion (WSL) occurs in up to 50% of patients during orthodontic treatment. Therefore, orthodontic adhesives need to be able to inhibit or reduce bacterial growth in order to prevent or minimize WSL. This study evaluated the antibacterial effect and shear bond strength (SBS) of a resin-based orthodontic adhesive containing the antibacterial monomer 2-methacryloxylethyl hexadecyl methyl ammonium bromide (MAE-HB). MAE-HB was added at three concentrations (1, 3, and 5 wt%) to a commercial orthodontic adhesive Transbond XT, while the blank control comprised unmodified Transbond XT. Their antibacterial effects on Streptococcus mutans were investigated after 0 and 180 days of aging. The SBS of metal brackets bonded to the buccal enamel surface of human premolars was assessed. Compared with the blank control, the MAE-HB-incorporated adhesive exhibited a significant contact inhibitory effect on the growth of S. mutans (P < 0.05), even after 180 days of aging. SBS and adhesive remnant index values revealed that the bonding ability of the experimental adhesive was not significantly adversely affected by the incorporation of MAE-HB at any of the three concentrations. Therefore, orthodontic adhesives with strong and long-lasting bacteriostatic properties can be created through the incorporation of MAE-HB without negatively influencing bonding ability.

Effect of silver nanoparticles on the physicochemical and antimicrobial properties of an orthodontic adhesive

OBJECTIVE

This study aimed to incorporate silver nanoparticle solutions (AgNP) in an orthodontic adhesive and evaluate its physicochemical and antimicrobial properties.

MATERIAL AND METHODS

Silver nanoparticle solutions were added to a commercial adhesive in different concentrations (w/w): 0%, 0.11%, 0.18%, and 0.33%. Shear bond strength (SBS) test was performed after bonding metal brackets to enamel. Raman spectroscopy was used to analyze in situ the degree of conversion (DC) of the adhesive layer. The surface free energy (SFE) was evaluated after the measurement of contact angles. Growth inhibition of Streptococcus mutans in liquid and solid media was determined by colony-forming unit count and inhibition halo, respectively. One-way ANOVA was performed for SBS, DC, SFE, and growth inhibition.

RESULTS

The incorporation of AgNP solution decreased the SBS (p<0.001) and DC in situ (p<0.001) values. SFE decreased after addition of 0.18% and 0.33% AgNP. Growth inhibition of S. mutans in liquid media was obtained after silver addition (p<0.05).

CONCLUSIONS

The addition of AgNP solutions to Transbond™ XT adhesive primer inhibited S. mutans growth. SBS, DC, and SFE values decreased after incorporation up to 0.33% AgNP solution without compromising the chemical and physical properties of the adhesive.

Antibacterial effect and shear bond strength of an orthodontic adhesive cement containing Galla chinensis extract

Galla chinensis extract (GCE), a naturally-derived agent, has a significant inhibitory effect on cariogenic bacteria. The present study aims to evaluate the antibacterial effect and shear bond strength of an orthodontic adhesive cement containing GCE. A resin-modified glass ionomer cement incorporated GCE at five mass fractions (0, 0.1, 0.2, 0.4, and 0.8%) to prepare GCE-containing cement for analysis. For the agar diffusion test, cement specimens were placed on agar disk inoculated with Streptococcus mutans (strain ATCC 25175). Following 48 h incubation, the inhibition halo diameter was measured. To assess bacteria colonization susceptibility, S. mutans adhesion to cement specimens was detected by scanning electron microscopy (SEM) following 48 h incubation. To evaluate bond strength, a total of 50 metal brackets were bonded on premolar surfaces by using cement (10 teeth/group). Following immersion in an artificial saliva for 3 days, shear bond strength (SBS) was measured. The results demonstrated that GCE-containing samples exhibited a larger bacterial inhibition halo than control, and the inhibition zone increased as the GCE mass fraction increased. SEM analysis demonstrated that S. mutans presented a weaker adherent capacity to all GCE-containing cements compared with control, but the difference between each GCE-containing group was not significant. SBS values of each GCE-containing group exhibited no difference compared with the control. In conclusion, GCE-containing adhesive cement exhibits a promising inhibitory effect on S. mutans growth and adhesion. Without compromising bond strength, adding GCE in adhesive cement may be an attractive option for preventing white spot lesions during orthodontic treatment.

A novel antimicrobial orthodontic band cement with in situ-generated silver nanoparticles

OBJECTIVE

To develop an antimicrobial orthodontic band cement for the prevention of white spot lesions using a novel process that generates silver nanoparticles (AgNP) in situ.

MATERIALS AND METHODS

Twenty-seven groups of AgNP-loaded Opal Band Cement (OBC) and two control groups were formulated with varying concentrations of additional benzoyl peroxide (0.5, 1.0, 1.5, or 2.0 wt%) and 2,2-(p-Tolylimino) diethanol (0.5 or 1 wt%). Rockwell15T hardness and near-infrared FTIR were used to assess degree of cure, three-point bending was used to determine modulus and ultimate transverse strength (UTS), and Ag(+) ion release was measured for up to 4 months in vitro using atomic absorption spectroscopy. Antimicrobial activity against Streptococcus mutans and Lactobacillus acidophilus was tested in vitro by counting colony-forming units for up to 28 days. Biocompatibility was evaluated following ISO specifications 7405 (2008), 10993-3 (2003), 10993-5 (2009), and 10993-10 (2010).

RESULTS

Most of the experimental groups had hardness, modulus, and UTS values similar to those of the control group. Ag(+) ion release was observed for all AgNP-loaded groups for up to 4 months. Increase in Ag loading increased Ag(+) ion release and in vitro antimicrobial effect. The biocompatibility of the optimal AgNP-loaded OBC was comparable to that of negative controls.

CONCLUSION

A novel antimicrobial orthodontic band cement was developed that has comparable mechanical properties to controls, controlled and sustained Ag(+) ion release, significant bacterial inhibition in vitro, and excellent biocompatibility.