Restoration of endodontically treated teeth: contemporary concepts and future perspectives

Real-Time Three-dimensional Dynamic Navigation for Post Space Preparation in Root Canal-Treated Teeth: An In vitro Study

INTRODUCTION

The aim of this study was to investigate the feasibility of a real-time three-dimensional dynamic navigation system (3D-DNS) for post space preparation (PSP) in root canal-treated teeth and to compare the accuracy and efficiency of 3D-DNS to freehand (FH) for PSP.

METHODS

Fifty-four maxillary molars were divided into two groups: 3D-DNS (n = 27) and FH group (n = 27). Cone beam computed tomography (CBCT) scans were taken preoperatively and postoperatively. The drilling path for the PSP was virtually planned in the preoperative CBCT scan in the X-guide software (X-Nav Technologies, Lansdale, PA). For the 3D-DNS group, the PSP drilling was conducted under dynamic navigation. The 3D deviations and angular deflections were calculated. The residual dentin thickness (RDT) was determined after PSP. The operation time and the total number of mishaps were recorded. Shapiro-Wilk, t-test or Mann-Whitney rank sum, weighted Cohen's kappa, and Fisher exact tests were used (P < .05).

RESULTS

The PSP was completed in all samples (54/54). The 3D-DNS was more accurate than the FH, with significantly fewer 3D deviations and angular deflections (all, P < .05). The 3D-DNS required less operating time than the FH (P < .05). For the 3D-DNS, no teeth had RDT < 1 mm, whereas 6/27 in the FH showed RDT < 1 mm after the PSP. There was no difference in the total number of mishaps (P > .05).

CONCLUSION

Within the limitations of this in vitro study, the 3D-DNS is feasible for PSP. The 3D-DNS improved the accuracy and efficiency of PSP. The dynamic navigation system can potentially become a safe and reliable technology for PSP.

Radiographic assessment of the quality of post and core restorations performed by general dental practitioners in Saudi Arabia

Background

Dentists utilize various techniques and materials for post and core restoration of endodontically treated teeth, which remains a noteworthy health concern and can be addressed through interdisciplinary strategies to enhance outcomes. Therefore, this study aimed to evaluate the technical quality of the residual gutta-percha (GP) and posts by analysing the periapical radiographs of endodontically restored teeth.

Methods

A total of 594 periapical digital radiographs were evaluated for tooth type, post material, post shape, design, diameter, length, residual GP, GP length, GP tapering, GP homogeneity, and final restoration. Frequency distribution and cross-tabulation of the variables were performed.

Results

Maxillary molars had the highest frequency of restorations, including posts, accounting for 27.4 %, followed by maxillary premolars (25.4 %) and maxillary anterior teeth (19.2 %). The prefabricated metallic posts were most commonly used (81.0 %), among these, 50.4 % were screwed posts. Tapered posts were the most commonly used (65.6 %). The percentage of posts with an acceptable length was 58.2 %. The most commonly used posts exhibited a width of one-third of the root diameter, accounting for 87.0 %. Suitable GP lengths were observed in 61.1 % of the restorations, and 62.8 % demonstrated adequate GP homogeneity. The findings of this study revealed that crown restoration accounted for 42.6 % of the studied sample.

Conclusions

The technical quality of the remaining GP after restoration was comparable to that of previous epidemiological investigations. However, the technical quality of the post was deemed suboptimal.

The fracture strength and the failure mode of lithium disilicate or resin nano ceramics as a crown, overlay, or endocrown restoration on endodontically treated teeth

INTRODUCTION

Different materials and restorative concepts have been proposed over the years to restore endodontically treated teeth (ETT). Monolithic ceramic and composite restoration can be lute to the tooh, without the use of a post. However, little is known how the material stiffness and presence of a composite core will affect the survival and failure mode. The objective of this in-vitro study was to evaluate the fracture strength and failure mode of endodontically treated molars, restored with ceramic or hybrid composite monolithic restoration, in the presence of absence of a composite core.

MATERIALS AND METHODS

Sixty depulped molars were restored with a lithium-disilicate (e.max CAD) or hybrid composite (Cerasmart) restoration. Both materials were used in a monolithic approach, but with 3 different designs: (a) monolithic endocrown, (b) crown with a separate composite core, and (c) overlay without core buildup or pulpal extension. Ten sound teeth were used as control group. All groups were thermocycled (10,000 cycles), subsequently loaded in a chewing simulator (100,000 cycles) and finally loaded until fracture.

RESULTS

Peak fracture loads and failure modes were registered. No significant differences were seen between the groups in terms of fracture load. Failure modes were statistically significantly different among groups with significant correlation between restoration type and material. (p < 0.001 and p = 0.033, respectively). No group presented significantly higher fracture resistance. Although ceramic crowns and overlays presented the highest repairability, all restored ETT were within the range of the intact tooth' fracture strength.

CONCLUSION

No restoration presented significant different fracture loads. However, the type of restoration and material choice were correlated to the fracture mode.

Selecting drill size for post space preparation based on final endodontic radiographs: An in vitro study

BACKGROUND

For placement of intraradicular posts the intracanal filling material has to be removed. If drills are employed for this purpose, extra widening of the canal, incomplete cracks or root perforation are probable when inappropriate size of drill is used.

OBJECTIVE

This in vitro study assessed the efficacy of radiographs taken after completion of root canal therapy in selecting the appropriate-sized Peeso reamer for post space preparation.

METHODS

Canals of 53 extracted maxillary and mandibular teeth of different types were cleaned and shaped. Then with acrylic resin 3-dimensional model of the intracanal space of each tooth was fabricated. Next, all canals were filled with gutta-percha and teeth were radiographed buccolingually. Based on these radiographs two observers selected a Peeso reamer that best matched each canal's diameter. The diameter of the selected Peeso reamer was compared to the diameter of the corresponding resin model of each canal by two independent observers and the difference was measured. The data were analyzed by paired sample t-test using SPSS version 22.

RESULTS

The diameter of the selected Peeso reamers ranged from 0.21 mm smaller to 0.12 mm larger than the diameter of intracanal spaces. The difference between reamer and resin model was less than 0.1 mm in 75% of the cases.

CONCLUSION

The result of this study suggests that post-operation endodontic radiographs are reliable means for selecting a size of Peeso reamer that does not encroach on dentinal wall during removal of intracanal filling material and post space preparation.

Assessing dentists' knowledge and experience in restoring endodontically treated teeth using post & cores

OBJECTIVES

The restoration of endodontically, heavily filled teeth has been a challenge for the dental profession for decades. The aims of this study were to investigate dentists' experience and knowledge in the use of post & core when restoring endodontically treated teeth.

METHOD

This was a mixed method study incorporating quantitative and qualitative data collection. An online questionnaire was developed and distributed, comprised of 18 questions. It was calculated that 93 respondents were needed to validate the study of which 60% should meet a minimum knowledge requirement.

RESULTS

173 respondents completed the questionnaire. 109 (63% (95%CI56%,70%) demonstrated proficient knowledge of post & core restorations. Recent graduates were more likely to follow current guidelines (F = 4.570: P<0.034). As the age of respondent dentists increases the number of posts placed (F = 18.85; p<0.001) and the perceived confidence level increases (Spearman's Rho 0.43: P<0.01). Experience of postgraduate education also positively influenced clinical confidence.

CONCLUSION

The placement of post & cores is influenced by age. Confidence is also influenced by age. More evidence on post usage is required and several questions remain to be answered on what drives decision making and perceived long-term success.

CLINICAL SIGNIFICANCE

There is a general acceptance of when a post and core restoration should be used. Clinician experience and age can have an impact on what type of restorations are used. Fibre posts are more commonly used due their accessibility and cost.

Influence of remaining axial walls on of root filled teeth restored with a single crown and adhesively bonded fibre post: A systematic review and meta-analysis

OBJECTIVES

To synthesise evidence on structural failures and prevalence of post-treatment endodontic disease (PTD) in anterior and posterior root filled teeth with a single crown and adhesively bonded fibre post with regards to the number of axial walls.

DATA

An electronic search was performed, no language constraints or restriction on the year of publication were applied.

SOURCES

PubMed, Medline, Cochrane and Scopus on 13th of July 2021.

STUDY SELECTION

Clinical studies that reported the remaining number of axial walls for permanent anterior and posterior root filled teeth (RFT) restored with single crowns and adhesively bonded fibre posts with a minimum of 1 year follow-up were included. Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines [1] were used. The number of axial walls and the success/failures were analysed as follows: fibre post and/or core decementation, post and/or core fracture and post treatment endodontic disease, and root fracture.

CONCLUSIONS

A total of 811 studies were identified with 5 meeting the inclusion criteria. The two randomized controlled trials included had 'some concerns' as determined by the Cochrane risk-of-bias 2 tool while the Newcastle-Ottawa scale found low risk of bias for the remaining three studies. The random effects model for subgroup meta-analysis revealed failures for posterior RFT increased with decreasing numbers of remaining walls. Failures for 0 remaining walls were 23% (95% CI = 10% - 36%) and for one remaining wall 15% (CI: 3% -26%), irrespective of follow-up times. Fibre post debonding and PTD increased with decreasing numbers of walls. Relative & catastrophic failure of posterior teeth restored with a fibre post and single crown after root canal treatment increased with decreasing numbers of remaining axial walls.

CLINICAL SIGNIFICANCE

This synthesis is unique as it minimizes the presence of confounding factors by reviewing evidence of failures and post-treatment endodontic disease associated with teeth restored with single crowns. Therefore, it provides valuable predictive evidence of potential coronal restoration catastrophes and post-treatment endodontic disease associated with root filled teeth.

Effect of cervical lesion centered access cavity restored with short glass fibre reinforced resin composites on fracture resistance in human mandibular premolars- an in vitro study

AIM

The aim of this study was to evaluate the fracture resistance of cervical lesion centered access cavity restored with short glass fibre reinforced resin materials in human mandibular premolars.

MATERIALS AND METHODS

Sixty freshly extracted human mandibular premolars were collected and assigned to positive control group (G1- Intact teeth) and other experimental groups (G2, G3. G4, G5, G6), Traditional Access Cavity(TAC) and Cervical Lesion Centered Access Cavity(CLCAC). Following endodontic therapy, samples were grouped accordingly, G2-CLCAC without restoration (Negative Control), G3-CLCAC restored with conventional nano-hybrid composite (Tetric-N-Ceram), G4-TAC restored with short glass fibre reinforced resin composite (Ever-X Posterior), G5-CLCAC restored with short glass fibre reinforced resin composite (Ever-X Posterior), G6- CLCAC restored with individually formed unidirectional fibre-reinforced post (Everstick post) and short glass fibre-reinforced resin composite (Ever-X Posterior). The samples were thermocycled (35 °C/28s, 15 °C/2s, 35 °C/28s, 45 °C/2s/10,000 cycles) and cyclically fatigued(2,50,000 cycles/15-30N/2 Hz) and then subsequently loaded to failure. The mean load to fracture (Newtons) were statistically analyzed using one-way ANOVA and Tukey's post HOC test and failure mode analysis was also done.

RESULTS

The mean fracture resistance of the CLCAC design restored with fibre reinforced materials was higher when compared to the TAC design but the difference was not statistically significant. The negative control group (CLCAC without restoration) showed significantly the least fracture resistance (P < 0.05) when compared to all the other groups except for group 3 (CLCAC restored with conventional composites).

CONCLUSIONS

Within the limitations of the study, it can be concluded that short glass fibre reinforced resin composites improved the fracture resistance of endodontically treated mandibular premolars irrespective of the type of access cavity designs. Favourable fractures were seen more in cervical lesion centered access cavity restored with short glass fibre reinforced composite materials. Nevertheless, the applicability of this design in multirooted teeth, canal cleanliness efficacy, and long term clinical performance are yet to be explored to complement this new access design.

Cone beam computed tomography analysis of residual dentin thickness after virtual post placement in the palatal roots of maxillary first molars

STATEMENT OF PROBLEM

In endodontically treated maxillary first molars, post space preparations in the palatal roots can compromise the residual dentin thickness (RDT) and increase the risk of perforations or root fractures. This can be attributed to the direction of the buccopalatal curvature that cannot be viewed with conventional 2D imaging.

PURPOSE

The purpose of this clinical study was to investigate the RDT of palatal roots following the placement of digital post analogs of different diameters positioned at various distances from the radiographic apex by using cone beam computed tomography (CBCT).

MATERIAL AND METHODS

A total of 122 deidentified CBCT data sets containing both maxillary permanent first molars were randomly selected from a private radiology practice. Digital parallel-sided post analogs were superimposed onto the CBCT coronal images at distances of 3 mm, 4 mm, and 5 mm from the radiographic apex and at a depth equal to the height of the anatomic crown (1:1 crown/post ratio). Post analogs of 0.9 mm, 1.0 mm, and 1.14 mm in diameter were matched with safety zone analogs representing 1 mm of circumferential RDT. The minimum RDT for each analog was determined and grouped into 3 categories: RDT≤0 mm, 0 mm<RDT<1 mm, and RDT≥1 mm. The statistical significance between post diameters and post depth was analyzed with the Friedman test and Conover post hoc test (α=.05).

RESULTS

Significant differences in RDT were found at all tested depths and diameters of post analogs (P<.001). Generally, the amount of RDT increased as the post length was reduced. Most teeth (>50.0%) had inadequate or no RDT. The depth of the post (P<.001) had a greater impact on RDT than the post diameter (P>.017). No similarities were found in the RDT between contralateral molars in 86.9% of the images.

CONCLUSIONS

The risk of insufficient RDT (<1 mm) after the placement of parallel-sided posts in the palatal roots of maxillary first molars is minimized if the post is inserted to a depth equaling the height of the crown compared with 3, 4, and 5 mm from the radiographic apex. The RDT of the palatal root of a maxillary first molar is not a reliable predictor of the contralateral palatal root RDT in the same patient.

Factors Related to the Outcomes of Cracked Teeth after Endodontic Treatment

INTRODUCTION

Cracked teeth are a common clinical finding; however, their presence renders diagnosis and prognosis unreliable. The purpose of this research was to assess the correlations of multiple factors on the prognosis of cracked teeth that had undergone endodontic treatment.

METHODS

A total of 3680 patients who received endodontic treatment by an advanced postdoctoral education program in endodontics with follow-up records of at least 1 year were assessed. From this sample, 62 patients met the inclusion criteria and were included in the final analysis. The factors being evaluated included demographics, clinical symptoms and signs, radiographic findings, and restoration type. Statistical analysis was then completed using the chi-square and Fisher exact tests.

RESULTS

The mean follow-up period was 23.3 months, with an overall tooth success rate of 75.8%. The success rates differed significantly when the patient had an existing preoperative periapical lesion, lacked a proper permanent restoration on the treated tooth, or had a post placed after root canal treatment. Data analysis showed that restoring the tooth after endodontic treatment was the single most important factor for prognosis. In fact, the endodontically treated teeth with definitive full-coverage restorations had a 2-year success rate of 93.6%.

CONCLUSION

Full-coverage restorations should be considered an important part of the treatment plan for cracked teeth treated endodontically.

Root Canal Transportation after Root Canal Preparation with ProTaper Next, WaveOne Gold, and Twisted Files

Background: Root canal preparation during endodontic treatment may be associated with various complications, including a change in the original pathway of the root canal lumen. The aim of our study was to determine whether files of similar sizes that use various movement kinematics (rotary, reciprocal, adaptive motion) cause root canal transportation, and whether the differences between such systems are statistically significant. Methods: The degree of root canal transportation (DT) was calculated with the use of computed tomography scans for 3 groups of teeth (for each group: n = 20) in which the root canals were prepared using either rotary (ProTaper Next—PTN), reciprocal (WaveOne Gold—WOG), or adaptive movement (Twisted Files—TF) instruments. Results: For rotary ProTaper Next instruments, the mean value of the DT index was 0.0795 (SD = 0.0179) for 3 mm from the apex, 0.09 (SD = 0.0262) for 6 mm from the apex, and 0.106 (SD = 0.0221) for 9 mm from the apex. For reciprocal WaveOne Gold Primary instruments, the mean value of the DT index was 0.0355 (SD = 0.015) for 3 mm from the apex, 0.061 (SD = 0.02) for 6 mm from the apex, and 0.08 (SD = 0.25) for 9 mm from the apex. For Twisted Files, the mean value of the DT index was 0.05 (SD = 0.03) for 3 mm from the apex, 0.092 (SD = 0.17) for 6 mm from the apex, and 0.08 (SD = 0.02) for 9 mm from the apex. Conclusions: The use of PTN, WOG, and TF files resulted in root canal transportation to a different degree. The use of rotary PTN files produced the most transported preparation, whereas the use of WOG files produced the conservative root canal preparation that allowed the retention of the original shape of the root canal.

Impact of a Core Ferrule Design on Fracture Resistance of Teeth Restored with Cast Post and Core

Objectives. To investigate the influence of a contra bevel on the fracture resistance of teeth restored with cast post and core. Materials and Methods. Sixty plastic analogues of an upper incisor were endodontically treated and prepared with 6° internal taper and 2 mm of ferrule in order to receive a cast post and core. The prepared samples were divided into two groups (n = 30); the first group serves as control while the second group was prepared with an external 30° bevel on the buccal and lingual walls. All samples crowned were exposed to a compressive load at 130° to their long axis until fractures occurred. Fracture resistance loads were recorded and failure modes were also observed. Mann-Whitney test was carried out to compare the two groups. Results. Mean failure loads for the groups were, respectively, 1038.69 N (SD ±243.52 N) and 1078.89 N (SD ±352.21 N). Statistically, there was no significant difference between the two groups (P = 0.7675 > 0.05). Conclusion. In the presence of a ferrule and a crown in the anterior teeth, adding a secondary ferrule to the cast post and core will not increase the resistance to fracture.