Frightened of the pulp? A qualitative analysis of undergraduate student confidence and stress during the management of deep caries and the exposed pulp

Effectiveness of pulpotomy in managing carious exposure in mature permanent teeth: A systematic review and meta-analysis

OBJECTIVES

This quantitative systematic review evaluated whether pulpotomy performed with hydraulic calcium silicate cements may be used as an alternative to root canal treatment (RCT) in mature permanent teeth with carious pulp exposure.

DATA SOURCES

A comprehensive search was conducted in PubMed, Web of Science, Scopus, and the Cochrane Library. No language restrictions were applied. The search included randomised controlled trials that compared pulpotomy to root canal treatment for managing carious exposure in mature permanent teeth.

STUDY SELECTION

Studies were selected based on predetermined inclusion criteria: randomised controlled trials involving mature permanent teeth with carious pulp exposure, using hydraulic calcium silicate cements for pulpotomy. Non-comparative studies, case reports, and trials involving primary or immature permanent teeth were excluded.

DATA

Data were extracted on success rates, clinical outcomes, follow-up periods, pain profiles, and potential complications. A meta-analysis was performed, revealing no statistically significant differences in success rates between pulpotomy and RCT. Both interventions demonstrated success rates exceeding 90 % at one-year and two-year follow-up periods. Pain profiles consistently showed lower post-operative pain intensity in the pulpotomy group compared to the RCT group during the first week. Potential complications, such as non-responsive pulp and difficulties in determining pulp vitality, were reported more frequently in the pulpotomy group.

CONCLUSIONS

Pulpotomy with bioactive hydraulic calcium silicate cements shows comparable success rates to RCT in managing carious pulp exposure in mature permanent teeth. The results suggest pulpotomy as a viable, less invasive alternative to RCT, particularly in cases where preservation of pulp vitality is paramount.

CLINICAL SIGNIFICANCE

This systematic review highlights pulpotomy as a less invasive and cost-effective alternative to root canal treatment in mature permanent teeth. With comparable success rates and lower post-operative pain, pulpotomy offers a promising approach to managing carious exposure and preserving tooth vitality.

EUROPEAN SOCIETY OF ENDODONTOLOGY Undergraduate Curriculum Guidelines for Endodontology

Undergraduate education should accomplish graduates who are skilled to provide quality care for patients, who are aware of their scope of practice, competency level and limits and who are open to referring patients whose needs are beyond their own skills and experience. They should also become self-efficacious. Quality performance begins with good diagnosis and decision-making. Graduates should understand when to treat, why to treat, what to treat and how to treat. These guidelines include a list of capabilities that the graduating student will be expected to have achieved to provide a minimum level of competency in endodontics. Theoretical knowledge, practical skills, understanding and insight should be assessed, with both formative and summative assessment procedures, making use of reflection and feedback. Endodontic procedures should be undertaken within the context of comprehensive patient care and should be evidence based. Students should not perform treatments on patients until they have demonstrated in a pre-clinical setting that they possess the required skills. Only if it is not possible to simulate a specific procedure sufficiently in a pre-clinical setting should students learn this procedure by performing it clinically under close supervision. Clinical endodontics should ideally be supervised by endodontists or by staff with special knowledge, interest and self-efficacy in endodontics. It is advised to ensure that students apply their knowledge and practice their skills periodically throughout the continuum of endodontic education until graduation. A philosophy of lifelong learning and evidence-based practice should be instilled in all dental undergraduates.

Selective Caries Removal: A Case Report with 21-Year Follow-Up

Dental caries remains the most prevalent chronic disease globally, and its management should adhere to the principles of minimal intervention dentistry. This study reports a series of successful cases involving the selective removal of carious tissue in permanent molars, with follow-up periods of up to 21 years. Six permanent molars with severe and deep carious lesions were treated with selective caries removal and restored with high-viscosity glass ionomer cement. Clinical examination revealed that the teeth were free from pain and sensitivity. Follow-up assessments were conducted at 7 and 21 years posttreatment. Treatment success was defined by the absence of clinical and radiographic signs, symptoms of pulp alterations, and lesion arrest. Successful minimally invasive approaches were observed with selective removal of carious tissue and maintenance of pulp vitality for up to 21 years.

Exploring deep caries management and barriers to the use of vital pulp treatments by primary care dental practitioners

AIM

The European Society of Endodontology outlines best practices for the management of deep caries and the pulp. Despite evidence supporting vital pulp treatments (VPTs) as predictable alternatives to conventional endodontic treatment, studies have shown they are not widely adopted in the UK. This study aimed to explore the barriers to implementation of VPTs by primary care general dental practitioners (GDPs).

METHODOLOGY

Qualitative one-to-one semi-structured online interviews were conducted with purposively sampled UK GDPs. Interview transcripts were analysed using reflexive thematic analysis. Recurring themes were iteratively refined as additional transcripts were reviewed.

RESULTS

Eleven participants were interviewed. A range of barriers to the provision of VPTs were identified, which aligned with two core themes: 'Motivational barriers to service provision' and 'Educational access & opportunities'. Sub-themes included lack of access to materials and equipment, deficiencies in knowledge of treatment (including protocols, outcomes and prognosis), lack of confidence (in treatment efficacy and clinical ability), time constraints and public dental service funding and remuneration.

CONCLUSIONS

This study identifies barriers to the widespread adoption of VPTs among primary care GDPs in public and private settings. Economic constraints, practitioner confidence, time limitations and educational gaps are key challenges. Addressing these may require systemic changes such as policy interventions, education and improved resource allocation.

Comparisons of student comprehension of 3D-printed, standard model, and extracted teeth in hands-on sessions

INTRODUCTION

Cavity preparation and direct and indirect pulp capping are difficult processes to learn in dentistry. Although plastic teeth are used in universities in Turkey, the standard model does not teach students how to distinguish between dental hard tissues from caries and how this relates to the pulp. The aim of this study was to investigate the differences in learning when a three-dimensional (3D)-printed tooth was employed in comparison with the standard model and extracted teeth. The differences are evaluated in the design, feasibility, and contribution of the 3D-printed dental tooth in pre-clinical education.

MATERIALS AND METHODS

The multi-layer 3D-printed tooth's authentic design and replication of the dental hard tissues and carious lesions are explored with 55 students for pre-clinical education, which includes caries excavation and direct and indirect pulp capping. The students completed questionnaires evaluating the 3D-printed teeth through comparison with the plastic and extracted teeth, rated with scores from 1 to 11 (1: poorest conformity; 11: excellent conformity).

RESULTS

The questionnaire results indicated that students approved the printed tooth model for the practice of theoretical knowledge and the model received ratings between good and excellent. The results were statistically analysed using the Wilcoxon signed-rank test, and the printed teeth had the highest approval from the students (p < .001).

CONCLUSION

The results of this study demonstrated that the use of the designed 3D-printed tooth is preferred by the students based on their perception of learning cavity preparation and pulp capping in a pre-clinical environment. Workflow and production were cost-effective with the use of 3D printing technology. The printed tooth allowed students to gain realistic experience before treating patients.

Postoperative pain after single-visit root canal treatment or vital pulp therapy: A systematic review and meta-analysis

BACKGROUND

This systematic review aimed to investigate whether vital pulp therapy and root canal treatment (RCT) promote different postoperative pain.

STUDIES REVIEWED

The authors searched PubMed, Cochrane Library, Embase, and Latin American and Caribbean Health Sciences Literature databases for studies published through June 30, 2022. The authors included randomized clinical trials if they reported on the assessment of postoperative pain after direct pulp capping, partial pulpotomy, pulpotomy, or single-visit RCT. The authors assessed the frequency of no, mild, moderate, and severe postoperative pain. They conducted meta-analyses to compare postoperative pain after full pulpotomy (PULP) and RCT.

RESULTS

The qualitative synthesis included 57 studies, and the authors conducted meta-analysis of 3. PULP leads to more asymptomatic cases (relative risk [RR], 1.06; 95% CI, 1.01 to 1.11; P < .01; I2 = 67%) and to a lower occurrence of mild (RR, 0.89; 95% CI, 0.79 to 0.99; P < .04; I2 = 37%) and moderate (RR, 0.70; 95% CI, 0.51 to 0.95; P < .02; I2 = 57%) postoperative pain than RCT. The frequency of severe pain was very low for both vital pulp therapy and RCT. Moderate to severe postoperative pain was more common at 48 hours through 72 hours after RCT and up to 36 hours after PULP. Pain intensity after PULP was higher using calcium-enriched material compared with using mineral trioxide aggregate at 12, 18, and 36 hours (P < .001).

PRACTICAL IMPLICATIONS

PULP showed a significantly higher incidence of no pain and a lower incidence of mild and moderate pain than single-visit RCT. Clinical decisions for RCT or PULP should not be based on differences in postoperative pain. When analgesia is indicated, it probably should be limited to a short time after PULP.

4-Year Pulp Survival in a Randomized Trial on Direct Pulp Capping

INTRODUCTION

This study aimed to assess pulp survival in a randomized trial on pulp lavage in adult nonpainful posterior teeth with carious pulp exposure. The treatment included complete caries excavation, direct pulp capping with mineral trioxide aggregate, and immediate restoration with composite resin.

METHODS

Fluid was collected from the pulp wound to assess matrix metalloproteinase-9 (MMP-9) and total protein values. Before pulp capping, cavities were randomly (block randomization, n = 48) washed with a physiological saline or a sodium hypochlorite solution (2.5% NaOCl). Treatment outcome was assessed clinically (cold test) and radiographically after at least 1 year and again after at least 3 years. Painful failures were differentiated from nonpainful failures. Pulp survival was estimated using the Kaplan-Meier method including 95% confidence intervals (CIs) up to 1500 days.

RESULTS

From the 96 patients originally enrolled, 73 individuals could be followed continuously. The clinical observations indicated a beneficial and sustained effect of pulp lavage with 2.5% NaOCl over a control treatment with physiological saline solution on estimated pulp survival 1500 days postintervention, with 7% (95% CI, 1%-40%) in the saline group versus 55% (95% CI, 30%-100%) in the NaOCl group. High MMP-9/total protein values in pulpal fluid collected from the exposed site indicated early and painful treatment failures yet were not associated with failures that occurred more than 250 days after intervention.

CONCLUSIONS

The low 4-year success rates reported here challenge the concept of direct pulp capping in the cases that were included. NaOCl lavage did not only increase the survival of affected pulps substantially but also particularly diminished painful failures (33% in the NaOCl group vs 62% in the saline group). The lack of the predictive value of MMP-9 assessments beyond early treatment failures points to inflammatory states of the pulp tissue under deep caries, which are not related to neutrophil infiltration.

Partial Pulpotomy in Young Permanent Teeth: A Systematic Review and Meta-Analysis

The aim of the present systematic review was to evaluate the clinical and radiographic success of partial pulpotomies in deep caries processes or post-eruptive defects in young, vital permanent teeth. Four electronic databases, PubMed, Scopus, Embase, and Google Scholar, were searched, followed by a manual search in the reference lists. Randomized controlled trials evaluating partial pulpotomy with a follow-up period of ≥12 months were included. A meta-analysis using a random effects model was performed. A total of 3127 articles were retrieved, and after duplicate removal, 2642 were screened by title and abstract; 1 additional article was found during the manual search, and 79 were identified. Finally, six papers were included in the review. Regardless of the partial pulpotomy modalities or material used, there were no significant differences between clinical and radiographic success rates (cumulative success rate 91.8-92.3%). Five studies were included in the meta-analysis that did not indicate any statistically significant differences in success rates when mineral trioxide aggregate was compared to other materials (95% confidence interval: 0.239 to 1.016; p = 0.055). The present research systematically evaluates the evidence and summarizes the available data on partial pulpotomy in young permanent teeth. Given its high clinical and radiographic success rate, partial pulpotomy should be considered when vital pulpal therapy needs to be performed in highly damaged young permanent teeth, as this procedure provides a biological benefit and allows more invasive endodontic treatments to be postponed.

Assessment of 3D-Printed Tooth Containing Simulated Deep Caries Lesions for Practicing Selective Caries Removal: A Pilot Study

A standard model for practicing caries removal skills is needed to support learners in managing deep carious lesions. The aim of the current study was to prepare 3D-printed teeth with added simulated carious layers and a pulpal structure. A first permanent mandibular containing occlusal (Class I) or proximal (Class II) cavities was printed. The teeth were then filled with wax and resin-modified glass ionomer cements mixed with a color modifier to simulate pulp and deep caries, respectively. Undergraduate dental students (n = 61) were asked to remove the caries using the selective caries removal (SCR) technique on the teeth. The students then completed a self-administered questionnaire to rate their caries removal experiences. One instructor then assessed the prepared teeth. Overall, the students provided positive feedback on the use of 3D-printed teeth; 72.1% agreed that the printed teeth provided a realistic model for practicing the SCR technique, 75.4% indicated that the new teeth were the appropriate choice for practicing the SCR technique, and 86.9% agreed that 3D-printed teeth should be used before treating real patients. More than half of the students had satisfactory outcomes in terms of the depth and caries removal aspects of the cavity preparation. These findings suggest that the developed 3D-printed teeth can potentially be adopted to practice caries removals in preclinical dental education.

Preclinical 3D-printed laboratory simulation of deep caries and the exposed pulp reduced student anxiety and stress, while increasing confidence and knowledge in vital pulp treatment

Aim

To evaluate the impact of a preclinical laboratory session using 3D printed teeth on dental student stress, anxiety, confidence and knowledge when treating deep caries and pulp exposure.

Methodology

This was a two‐centre controlled study, with randomized distribution of students into two groups: a vital pulp treatment (VPT) lecture‐only (control) group and a VPT‐lecture combined with a VPT‐laboratory (experimental) group. In both universities, preclinical students with endodontic or operative dentistry laboratory sessions could participate. All students were invited to the lecture. Two weeks later (timepoint‐T1), both groups completed validated and bespoke questionnaires and scales to evaluate their stress (Stress‐VAS), anxiety (STAI Trait [T] and State [S]), self‐confidence and knowledge. Thereafter, only the experimental group attended the hands‐on laboratory session demonstrating the techniques of selective caries removal and partial pulpotomy on a commercial 3D‐printed tooth. Two weeks later (timepoint‐T2), the participants from both groups repopulated the same questionnaires and VAS. The control group had the laboratory session after the completion of the study. The statistical analysis was performed with Statistica® (significance p = .05). The homogeneity between the two samples was checked by Khi² and Student tests. Stress‐VAS, STAI‐S, confidence and knowledge scores were compared within each group, and between the two groups, at T1 and T2, with a repeated measures anova test (+/−Tukey post‐hoc test).

Results

The groups comprised 54 students each, with no statistical difference between the groups regarding demographic, academic data and STAI‐T score. The two groups had no significant difference of Stress‐VAS, STAI‐S, confidence and knowledge scores at T1 while they presented a significant difference in stress, anxiety and confidence scores at T2, but with no significant difference in knowledge score. However, knowledge score, as other parameters, improved significantly between T1 and T2 in the experimental group.

Conclusions

The addition of a laboratory session using 3D‐printed teeth that simulated deep caries and pulp exposure management, significantly reduced the stress and anxiety of students and increased their confidence. Within the limitations of this study, the benefit of introducing new technology in increasing student confidence and reducing stress offers opportunity for educational improvement in the VPT and cariology areas.

Present status and future directions - Vital pulp treatment and pulp preservation strategies

Therapeutic strategies focussed on the pulp preservation, are important when managing vital teeth with deep caries and an exposed pulp. These vital pulp treatments (VPTs); however, are not new, with indirect and direct pulp capping procedures being described as a therapy for carious teeth for over a century. As a result of unpredictable outcomes, the traditional indications for VPT particularly when the pulp was exposed were limited to the treatment of immature teeth with incomplete root formation. Over the last 20 years, the advent of regenerative endodontics and the promotion of biologically based therapies aimed at reducing intervention have reinvigorated VPT with new waves of basic science and clinical research indicating a role for VPT not only in mature cariously affected teeth, but also in teeth with signs and symptoms indicative of irreversible pulpitis. Driven by new materials such as hydraulic calcium silicate cements, a better understanding of pulpal immunity and biology as well and improved tissue handling, VPT has been at the forefront of treatment recommendations made by global Cariology and Endodontic organizations. Care must be exercised, however, as key gaps in scientific knowledge remain alongside severe limitations in educational dissemination amongst dentists. Although research has highlighted that carious injury to the dentine–pulp complex stimulates a wide range of responses and that the interaction between infection, inflammation and repair will eventually impact on the outcome of pulpitis, our ability to accurately and objectively diagnose the true inflammatory state of the pulp remains poor. An overreliance on symptoms leaves clinicians with subjective, crude diagnostic tools by which to inform treatment planning and decision‐making, which results in large variations in the treatments offered to patients. Not only is there an urgent need to develop preoperative and intraoperative diagnostic tools, but there is also a paucity of the high‐quality comparative evidence required to answer the most important questions and justify treatment options. The aim of this review was to consider the current status of VPT and to discuss the principle problems that are hindering clinical acceptance of these techniques. Potential solutions and opportunities are offered to suggest ways that VPT may become a more consistently prescribed evidenced‐based treatment in dental practice.

Evaluation of the Most Stressful Dental Treatment Procedures of Conservative Dentistry among Polish Dental Students

BACKGROUND

Dental schools are considered to be a very stressful environment; the stress levels of dental students are higher than those of the general population. The aim of this study was to assess the level of stress among dental students while performing specific dental procedures.

METHODS

A survey was conducted among 257 participants. We used an original questionnaire, which consisted of 14 questions assigned to three categories: I-Diagnosis, II-Caries Treatment, and III-Endodontic Treatment. Each participant marked their perceived level of stress during the performed dental treatment procedures. The scale included values of 0-6, where 0 indicates no stress, while 6 indicates high stress.

RESULTS

Third- (p=0.006) and fourth-year (p=0.009) women were characterized by a higher level of perceived stress during dental procedures related to caries treatment. Caries treatment procedures were the most stressful for 18.3% of third-year students, 4.3% of fourth-year students, and 3.2% of fifth-year students. Furthermore, 63.4% of third-year students, 47.3% of fourth-year students, and 17.2% of fifth-year students indicated that they felt a high level of stress when performing endodontic procedures.

CONCLUSION

Third- and fourth-year female students are characterized by a higher level of stress during caries and endodontic treatment procedures. The most stressful treatments for participants were endodontic treatment procedures.