Nisin-loaded alginate-high methoxy pectin microparticles: preparation and physicochemical characterisation

Effect of Callus Cell Immobilization on the Textural and Rheological Properties, Loading, and Releasing of Grape Seed Extract from Pectin Hydrogels

The purpose of the present study was to prepare pectin hydrogels with immobilized Lemna minor callus cells and to identify the effect of cell immobilization on the textural, rheological, and swelling properties; loading; and releasing of grape seed extract (GSE) from the hydrogels. Hardness, adhesiveness, elasticity, the strength of linkage, and complex viscosity decreased with increasing cell content in the hydrogels based on pectin with a degree of methyl esterification (DM) of 5.7% (TVC) and during incubation in gastrointestinal fluids. An increase in the rheological properties and fragility of pectin/callus hydrogels based on pectin with a DM of 33.0% (CP) was observed at a cell content of 0.4 g/mL. TVC-based pectin/callus beads increased their swelling in gastrointestinal fluids as cell content increased. TVC-based beads released GSE very slowly into simulated gastric and intestinal fluids, indicating controlled release. The GSE release rate in colonic fluid decreased with increasing cell content, which was associated with the accumulation of GSE in cells. CP-based beads released GSE completely in the intestinal fluid due to weak textural characteristics and rapid degradation within 10 min. Pectin/callus hydrogels have the ability to preserve GSE for a long time and may have great potential for the development of proanthocyanidin delivery systems due to their novel beneficial physicochemical and textural properties.

Postbiotic characterization of a potential probiotic yeast isolate, and its microencapsulation in alginate beads coated layer-by-layer with chitosan

Considering biosafety concerns and survivability limitations of probiotics (PRO) under different stresses, application of postbiotics and encapsulated PRO has received considerable attentions. Accordingly, the objective of the present study was to investigate the postbiotic capabilities of a potential PRO yeast isolate and the effect of encapsulation with alginate (Alg) and chitosan (Ch) on its survival under SGI conditions. Sequencing results of the PCR products led to the identification of Saccharomyces cerevisiae as the selected potential PRO yeast isolated from wheat germ sourdough. High survival of the isolate under simulated gastrointestinal (SGI) conditions (95.74%), its proper adhesion abilities, as well as its potent inhibitory activity against Listeria monocytogenes (75.84%) and Aspergillus niger (77.35%) were approved. Interestingly, the yeast cell-free supernatant (CFS) showed the highest antioxidant (84.35%) and phytate-degrading (56.19%) activities compared to the viable and heat-dead cells of the isolate. According to the results of the HPLC-based assay, anti-ochratoxin A (OTA) capability of the dead cells was also significantly (P < 0.05) higher than that of the viable cell. Meanwhile, the yeast CFS had no anti-OTA and antimicrobial activities against the foodborne bacteria and fungi tested. Further, microencapsulation of the yeast isolate in Alg beads coated layer-by-layer with Ch (with 77.02% encapsulation efficacy and diameter of 1059 μm based on the field emission scanning electron microscopy analysis) significantly enhanced its survivability under SGI conditions in comparison with the free cells. In addition, electrostatic cross-linking between negatively charged carboxylic groups of Alg and positively charged amino groups of Ch was verified in accordance with Fourier transform infrared and zeta potential data. Human and/or industrial food trials in future are needed for practical applications of these emerging ingredients.

Preparation, physicochemical characterization and swelling properties of composite hydrogel microparticles based on gelatin and pectins with different structure

Composite hydrogel microparticles based on pectins with different structures (callus culture pectin (SVC) and apple pectin (AU)) and gelatin were developed. Hydrogel microparticles were formed by the ionotropic gelation and electrostatic interaction of COO- groups of pectin and NH3+ groups of gelatin, which was confirmed by FTIR spectroscopy. The addition of gelatin to pectin-based gel formulations resulted in a decrease in gel strength, whereas increasing gelatin concentration enhanced this effect. The microparticle gel strength increased in proportion to the increase in the pectin concentration. The DSC and TGA analyzes showed that pectin-gelatin gels had the higher thermal stability than individual pectins. The gel strength, Ca2+ content and thermal stability of the microparticles based on gelatin and SVC pectin with a lower degree of methylesterification (DM) (14.8 %) were higher compared to that of microparticles based on gelatin and AU pectin with a higher DM (40 %). An increase in the SVC concentration, Ca2+ content and gel strength of SVC-gelatin microparticles led to a decrease in the swelling degree in simulated gastrointestinal fluids. The addition of 0.5 % gelatin to gels based on AU pectin resulted in increased stability of the microparticles in gastrointestinal fluids, while the microparticles from AU without gelatin were destroyed.

Ca-Alginate Hydrogel with Immobilized Callus Cells as a New Delivery System of Grape Seed Extract

The development of new delivery systems for polyphenols is necessary to maintain their antioxidant activity and targeted delivery. The purpose of this investigation was to obtain alginate hydrogels with immobilized callus cells, in order to study the interaction between the physicochemical properties of hydrogels, texture, swelling behaviour, and grape seed extract (GSE) release in vitro. The inclusion of duckweed (LMC) and campion (SVC) callus cells in hydrogels led to a decrease in their porosity, gel strength, adhesiveness, and thermal stability, and an increase in the encapsulation efficiency compared with alginate hydrogel. The incorporation of LMC cells (0.17 g/mL), which were smaller, resulted in the formation of a stronger gel. The Fourier transform infrared analyses indicated the entrapment of GSE in the alginate hydrogel. Alginate/callus hydrogels had reduced swelling and GSE release in the simulated intestinal (SIF) and colonic (SCF) fluids due to their less porous structure and the retention of GSE in cells. Alginate/callus hydrogels gradually released GSE in SIF and SCF. The faster GSE release in SIF and SCF was associated with reduced gel strength and increased swelling of the hydrogels. LMC-1.0Alginate hydrogels with lower swelling, higher initial gel strength, and thermal stability released GSE more slowly in SIF and SCF. The GSE release was dependent on the content of SVC cells in 1.0% alginate hydrogels. The data obtained show that the addition of callus cells to the hydrogel provides them with physicochemical and textural properties that are useful for the development of drug delivery systems in the colon.

Delivery system for grape seed extract based on biodegradable pectin-Zn-alginate gel particles

Pectin-Zn-alginate gel particles from callus culture pectin with increased linearity and decreased rhamnogalacturonan I branching and degree of methylesterification had a higher gel strength and encapsulation capacity. An increase of the alginate concentration led to an increase in the particle gel strength. The grape seed extract (GSE) loaded and empty particles swelled slightly in the simulated gastric fluid (SGF) and gradually in the intestinal (SIF) fluid. The swelling degrees of the GSE-loaded and empty particles in the simulated colonic fluids (SCF) were decreased in the range SCF-7.0 (pH 7.0 + pectinase) > SCF-5.3 (pH 5.3 + pectinase) > SCF-2.3 (pH 2.3 + pectinase). The FTIR spectra indicated that GSE was embedded in the composite particles. Negligible leakage of GSE in SGF was shown. The increase in GSE release in SIF was due to the decrease in particle gel strength and increased swelling degree. The GSE release in fluids simulating the colon inflammation (SCF-2.3 and SCF-5.3) was similar, and it was lower than that in the SCF-7.0 simulating a healthy colon due to the increased gel strength. The percentage release of GSE increased slightly after exposure to different pH. Pectin-Zn-alginate hydrogel systems may be promising candidates for colon-targeted GSE delivery systems.

Drug Delivery Systems for the Oral Administration of Antimicrobial Peptides: Promising Tools to Treat Infectious Diseases

Antimicrobial peptides (AMPs) have a great potential to face the global expansion of antimicrobial resistance (AMR) associated to the development of multidrug-resistant (MDR) pathogens. AMPs are usually composed of 10–50 amino acids with a broad structural diversity and present a range of antimicrobial activities. Unfortunately, even if the oral route is the most convenient one, currently approved therapeutic AMPs are mostly administrated by the intravenous route. Thus, the development of novel drug delivery systems (DDSs) represents a promising opportunity to protect AMPs from chemical and enzymatic degradation through the gastrointestinal tract and to increase intestinal permeability leading to high bioavailability. In this review, the classification and properties as well as mechanisms of the AMPs used in infectiology are first described. Then, the different pharmaceutical forms existing in the market for oral administration are presented. Finally, the formulation technologies, including microparticle- and nanoparticle-based DDSs, used to improve the oral bioavailability of AMPs are reviewed.

Recent Advances in Encapsulation, Protection, and Oral Delivery of Bioactive Proteins and Peptides using Colloidal Systems

There are many areas in medicine and industry where it would be advantageous to orally deliver bioactive proteins and peptides (BPPs), including ACE inhibitors, antimicrobials, antioxidants, hormones, enzymes, and vaccines. A major challenge in this area is that many BPPs degrade during storage of the product or during passage through the human gut, thereby losing their activity. Moreover, many BPPs have undesirable taste profiles (such as bitterness or astringency), which makes them unpleasant to consume. These challenges can often be overcome by encapsulating them within colloidal particles that protect them from any adverse conditions in their environment, but then release them at the desired site-of-action, which may be inside the gut or body. This article begins with a discussion of BPP characteristics and the hurdles involved in their delivery. It then highlights the characteristics of colloidal particles that can be manipulated to create effective BPP-delivery systems, including particle composition, size, and interfacial properties. The factors impacting the functional performance of colloidal delivery systems are then highlighted, including their loading capacity, encapsulation efficiency, protective properties, retention/release properties, and stability. Different kinds of colloidal delivery systems suitable for encapsulation of BPPs are then reviewed, such as microemulsions, emulsions, solid lipid particles, liposomes, and microgels. Finally, some examples of the use of colloidal delivery systems for delivery of specific BPPs are given, including hormones, enzymes, vaccines, antimicrobials, and ACE inhibitors. An emphasis is on the development of food-grade colloidal delivery systems, which could be used in functional or medical food applications. The knowledge presented should facilitate the design of more effective vehicles for the oral delivery of bioactive proteins and peptides.

Designing soluble soybean polysaccharides-based nanoparticles to improve sustained antimicrobial activity of nisin

Nisin is a natural antimicrobial agent and food-grade material, while the poor stability and short duration of antimicrobial activity limit its widespread use in the food industry. In the present work, soluble soybean polysaccharide (SSPS)-based nanoparticles have been developed to improve the stability and sustained antimicrobial activity of nisin. The encapsulation efficiency (EE) of nisin-loaded SSPS nanoparticles (Nisin-SSPS-NPs) prepared under the optimized conditions can be up to 99.8%, and the particle size is about 112 nm. The formation of Nisin-SSPS-NPs was mainly mediated by the electrostatic interactions and hydrogen bonding, which was evidenced by the results of zeta potential and Fourier Transform infrared spectroscopy (FTIR). Agar diffusion assay exhibited that Nisin-SSPS-NPs had confirmed antimicrobial activity against Gram-positive bacteria, such as Listeria monocytogenes, Bacillus subtilis, and Staphylococcus aureus. The sustained release of nisin in Nisin-SSPS-NPs endows nisin with a long-lasting antimicrobial activity, which increases the shelf-life of the fresh tomato juice.

Microencapsulation of microbial canthaxanthin with alginate and high methoxyl pectin and evaluation the release properties in neutral and acidic condition

Canthaxanthin (CX) is an orange-red keto-carotenoid with high antioxidant activity. This functional pigment is sensitive to oxygen, light, pH and heat. In this study, CX was produced by the Dietzia natronolimnaea HS-1 and was encapsulated in Alginate (Alg) and Alg-high methoxyl pectin (HMP) through O/W/O multiple emulsion/external gelation method to developed resistant microparticles among acidic and neutral pHs. Results showed that initial CX concentration had a significant influence on total CX (TCX), surface CX (SCX), microencapsulation efficiency (EE) and particles size. The highest EE% for Alg (60.21 ± 0.18) and Alg-HMP (70.60 ± 0.68) were obtained with CX initial concentration of 11 and 18 μg/mg, respectively. Alg microparticles showed smaller size compare to Alg-HMP microcapsules. Presence of CX in microparticles and good antioxidant activity was confirmed by FT-IR spectroscopy and DPPH assay, respectively. CX in vitro release was 66% and 49% in acidic condition and 76% and 50% in neutral condition for Alg and Alg-HMP, respectively. Thus, Alg-HMP-CX₁₈ microparticles were selected to be used in both neutral and acidic foods such as milk and fermented milks products as an antioxidant and a colorant agent.

Nano-Strategies to Fight Multidrug Resistant Bacteria-"A Battle of the Titans"

Infectious diseases remain one of the leading causes of morbidity and mortality worldwide. The WHO and CDC have expressed serious concern regarding the continued increase in the development of multidrug resistance among bacteria. Therefore, the antibiotic resistance crisis is one of the most pressing issues in global public health. Associated with the rise in antibiotic resistance is the lack of new antimicrobials. This has triggered initiatives worldwide to develop novel and more effective antimicrobial compounds as well as to develop novel delivery and targeting strategies. Bacteria have developed many ways by which they become resistant to antimicrobials. Among those are enzyme inactivation, decreased cell permeability, target protection, target overproduction, altered target site/enzyme, increased efflux due to over-expression of efflux pumps, among others. Other more complex phenotypes, such as biofilm formation and quorum sensing do not appear as a result of the exposure of bacteria to antibiotics although, it is known that biofilm formation can be induced by antibiotics. These phenotypes are related to tolerance to antibiotics in bacteria. Different strategies, such as the use of nanostructured materials, are being developed to overcome these and other types of resistance. Nanostructured materials can be used to convey antimicrobials, to assist in the delivery of novel drugs or ultimately, possess antimicrobial activity by themselves. Additionally, nanoparticles (e.g., metallic, organic, carbon nanotubes, etc.) may circumvent drug resistance mechanisms in bacteria and, associated with their antimicrobial potential, inhibit biofilm formation or other important processes. Other strategies, including the combined use of plant-based antimicrobials and nanoparticles to overcome toxicity issues, are also being investigated. Coupling nanoparticles and natural-based antimicrobials (or other repurposed compounds) to inhibit the activity of bacterial efflux pumps; formation of biofilms; interference of quorum sensing; and possibly plasmid curing, are just some of the strategies to combat multidrug resistant bacteria. However, the use of nanoparticles still presents a challenge to therapy and much more research is needed in order to overcome this. In this review, we will summarize the current research on nanoparticles and other nanomaterials and how these are or can be applied in the future to fight multidrug resistant bacteria.

Encapsulation, protection, and delivery of bioactive proteins and peptides using nanoparticle and microparticle systems: A review

There are many examples of bioactive proteins and peptides that would benefit from oral delivery through functional foods, supplements, or medical foods, including hormones, enzymes, antimicrobials, vaccines, and ACE inhibitors. However, many of these bioactive proteins are highly susceptible to denaturation, aggregation or hydrolysis within commercial products or inside the human gastrointestinal tract (GIT). Moreover, many bioactive proteins have poor absorption characteristics within the GIT. Colloidal systems, which contain nanoparticles or microparticles, can be designed to encapsulate, retain, protect, and deliver bioactive proteins. For instance, a bioactive protein may have to remain encapsulated and stable during storage and passage through the mouth and stomach, but then be released within the small intestine where it can be absorbed. This article reviews the application of food-grade colloidal systems for oral delivery of bioactive proteins, including microemulsions, emulsions, nanoemulsions, solid lipid nanoparticles, multiple emulsions, liposomes, and microgels. It also provides a critical assessment of the characteristics of colloidal particles that impact the effectiveness of protein delivery systems, such as particle composition, size, permeability, interfacial properties, and stability. This information should be useful for the rational design of medical foods, functional foods, and supplements for effective oral delivery of bioactive proteins.

Impact of pectin esterification on the antimicrobial activity of nisin-loaded pectin particles

The relationship between pectin structure and the antimicrobial activity of nisin-loaded pectin particles was examined. The antimicrobial activity of five different nisin-loaded pectin particles, i.e., nisin-loaded high methoxyl pectin, low methoxyl pectin, pectic acid, dodecyl pectin with 5.4 and 25% degree of substitution were tested in the pH range of 4.0-7.0 by agar-diffusion assay and agar plate count methods. It was found that the degree of esterification of carboxyl group of galacturonic acid in pectin molecule is important for the antimicrobial activity of nisin-loaded pectin particles. Nisin-loaded particles prepared using pectic acid or the pectin with low degree of esterification exhibit higher antimicrobial activity than nisin-loaded high methoxyl pectin particles. Pectins with free carboxyl groups or of low degree of esterification are the most suitable for particles preparation. Moreover, nisin-loaded pectin particles were active at close to neutral or neutral pH values. Therefore, they could be effectively applied for food preservation. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 33:245-251, 2017.