Noninvasive sensing of thermal treatments of Japanese seafood products using imaging spectroscopy

Seafood Processing, Preservation, and Analytical Techniques in the Age of Industry 4.0

Fish and other seafood products are essential dietary components that are highly appreciated and consumed worldwide. However, the high perishability of these products has driven the development of a wide range of processing, preservation, and analytical techniques. This development has been accelerated in recent years with the advent of the fourth industrial revolution (Industry 4.0) technologies, digitally transforming almost every industry, including the food and seafood industry. The purpose of this review paper is to provide an updated overview of recent thermal and nonthermal processing and preservation technologies, as well as advanced analytical techniques used in the seafood industry. A special focus will be given to the role of different Industry 4.0 technologies to achieve smart seafood manufacturing, with high automation and digitalization. The literature discussed in this work showed that emerging technologies (e.g., ohmic heating, pulsed electric field, high pressure processing, nanotechnology, advanced mass spectrometry and spectroscopic techniques, and hyperspectral imaging sensors) are key elements in industrial revolutions not only in the seafood industry but also in all food industry sectors. More research is still needed to explore how to harness the Industry 4.0 innovations in order to achieve a green transition toward more profitable and sustainable food production systems.

Monitoring Thermal and Non-Thermal Treatments during Processing of Muscle Foods: A Comprehensive Review of Recent Technological Advances

Muscle food products play a vital role in human nutrition due to their sensory quality and high nutritional value. One well-known challenge of such products is the high perishability and limited shelf life unless suitable preservation or processing techniques are applied. Thermal processing is one of the well-established treatments that has been most commonly used in order to prepare food and ensure its safety. However, the application of inappropriate or severe thermal treatments may lead to undesirable changes in the sensory and nutritional quality of heat-processed products, and especially so for foods that are sensitive to thermal treatments, such as fish and meat and their products. In recent years, novel thermal treatments (e.g., ohmic heating, microwave) and non-thermal processing (e.g., high pressure, cold plasma) have emerged and proved to cause less damage to the quality of treated products than do conventional techniques. Several traditional assessment approaches have been extensively applied in order to evaluate and monitor changes in quality resulting from the use of thermal and non-thermal processing methods. Recent advances, nonetheless, have shown tremendous potential of various emerging analytical methods. Among these, spectroscopic techniques have received considerable attention due to many favorable features compared to conventional analysis methods. This review paper will provide an updated overview of both processing (thermal and non-thermal) and analytical techniques (traditional methods and spectroscopic ones). The opportunities and limitations will be discussed and possible directions for future research studies and applications will be suggested.

Monitoring Thermal Treatments Applied to Meat Using Traditional Methods and Spectroscopic Techniques: a Review of Advances over the Last Decade

Thermal treatments are often applied during processing or preparation of muscle foods aiming to both improve the palatability and organoleptic properties and to ensure the safety of the treated food. However, the application of inappropriate or severe thermal treatments can lead to undesirable changes in the sensory and nutritional quality of heat-processed products, and especially so for foods that are sensitive to thermal treatments, such as meat and meat products. The impact of traditional and new heat processing technologies (e.g. microwaving, ohmic, and radio frequency heating) on meat quality has been widely assessed by a wide range of conventional methods, such as sensory, microbiological, and physicochemical methods. Due to the destructive nature and the time required to perform these assessments, alternative online methods are highly needed in order to achieve continuous monitoring through online applications. In this review paper, both traditional and new heat processing methods and their impact on the quality of meat will be first briefly presented. The methods and techniques that have been applied to monitor changes induced by application of thermal treatments will be then discussed. The main focus will be put on the application of spectroscopic techniques, as rapid and non-destructive methods compared to most conventional techniques. Finally, future trends and possible applications and research directions will be suggested.

Spectroscopic Techniques for Monitoring Thermal Treatments in Fish and Other Seafood: A Review of Recent Developments and Applications

Cooking is an important processing method, that has been used since ancient times in order to both ensure microbiological safety and give desired organoleptic properties to the cooked food. Fish and other seafood products are highly sensitive to thermal treatments and the application of severe heat can result in negative consequences on sensory and nutritional parameters, as well as other quality attributes of the thermally processed products. To avoid such undesired effects and to extend the shelf life of these perishable products, both the heat processing methods and the assessment techniques used to monitor the process should be optimized. In this review paper, the most common cooking methods and some innovative ones will first be presented with a brief discussion of their impact on seafood quality. The main methods used for monitoring heat treatments will then be reviewed with a special focus on spectroscopic techniques, which are known to be rapid and non-destructive methods compared to traditional approaches. Finally, viewpoints of the current challenges will be discussed and possible directions for future applications and research will be suggested. The literature presented in this review clearly demonstrates the potential of spectroscopic techniques, coupled with chemometric tools, for online monitoring of heat-induced changes resulting from the application of thermal treatments of seafood. The use of fluorescence hyperspectral imaging is especially promising, as the technique combines the merits of both fluorescence spectroscopy (high sensitivity and selectivity) and hyperspectral imaging (spatial dimension). With further research and investigation, the few current limitations of monitoring thermal treatments by spectroscopy can be addressed, thus enabling the use of spectroscopic techniques as a routine tool in the seafood industry.

Use of Spectroscopic Techniques for a Rapid and Non-Destructive Monitoring of Thermal Treatments and Storage Time of Sous-Vide Cooked Cod Fillets

In this work, the potential of spectroscopic techniques was studied to investigate heat-induced changes occurring during the application of thermal treatments on cod (Gadus morhua L.) fillets. Vacuum-packed samples were thermally treated in a water bath at 50, 60, 70 and 80 °C for 5 and 10 min, and further stored for one, four, and eight days at 4 ± 1 °C before analysis. Several traditional (including cooking loss, drip loss, texture, protein solubility, protein oxidation, and color) and spectroscopic (fluorescence and diffuse reflectance hyperspectral imaging) measurements were conducted on the same samples. The results showed a decrease in fluorescence intensity with increasing cooking temperature and storage time, while the impact of cooking time was only noticeable at low temperatures. Diffuse reflectance data exhibited a decrease in absorbance, possibly as a result of protein denaturation and increased scattering at higher cooking temperatures. Both fluorescence and diffuse reflectance data were highly correlated with color parameters, whereas moderate correlations were observed with most other traditional parameters. Support vector machine models performed better than partial least square ones for both classification of cod samples cooked at different temperatures and in prediction of the cooking temperature. The best classification result was obtained on fluorescence data, achieving an accuracy of 92.5%, while the prediction models resulted in a root mean square error of prediction of cooking temperature lower than 5 °C. Overall, the classification and prediction models showed good results, indicating that spectroscopic techniques, especially fluorescence hyperspectral imaging, have a high potential for monitoring thermal treatments in cod fillets.

Estimation of Chemical Composition of Pork Trimmings by Use of Density Measurement-Hydrostatic Method

This study aims to determine the possibility of using density measurements by using the hydrostatic method for the estimation of the chemical composition of pork. The research material included 75 pork samples obtained during industrial butchering and cutting. The density measurements were performed using the hydrostatic method based on Archimedes’ principle. The meat samples were minced, and the content of the basic chemical components in them was determined. The usefulness of density measurement using the hydrostatic method in chemical composition estimation was determined by analyzing the correlation for the entire population, and after grouping the samples with a low (<15%), medium (15–25%), and high (>25%) fat content. High (in absolute value) coefficients of correlation between the meat density and the content of water (0.96), protein (0.94), and fat (−0.96) were found based on the results obtained. In order to achieve higher accuracy of the estimation, the applied regression equations should be adjusted to the presumed fat content in the meat. The standard error of prediction (SEP) values ranged from 0.67% to 2.82%, which indicates that the calculated estimation accuracy may be sufficient for proper planning of the production. Higher SEP values were found in fat content estimation and the lowest ones were found in protein content estimation.

Advanced Techniques for Hyperspectral Imaging in the Food Industry: Principles and Recent Applications

Hyperspectral imaging (HSI) is a technology integrating optical sensing technologies of imaging, spectroscopy, and chemometrics. The sensor of HSI can obtain both spatial and spectral information simultaneously. Therefore, the chemical and physical information of food products can be monitored in a rapid, nondestructive, and noncontact manner. There are numerous reports and papers and much research dealing with the applications of HSI in food in recent years. This review introduces the principle of HSI technology, summarizes its recent applications in food, and pinpoints future trends.

Applications of Non-destructive Technologies for Agricultural and Food Products Quality Inspection

The quality and safety of food is an increasing concern for worldwide business. Non-destructive methods (NDM), as a means of assessment and instrumentation have created an esteemed value in sciences, especially in food industries. Currently, NDM are useful because they allow the simultaneous measurement of chemical and physical data from food without destruction of the substance. Additionally, NDM can obtain both quantitative and qualitative data at the same time without separate analyses. Recently, many studies on non-destructive detection measurements of agro-food products and final quality assessment of foods were reported. As a general statement, the future of using NDM for assessing the quality of food and agricultural products is bright; and it is possible to come up with interesting findings through development of more efficient and precise imaging systems like the machine vision technique. The present review aims to discuss the application of different non-destructive methods (NDM) for food quality and safety evaluation.