FISH landmarks for Aedes aegypti chromosomes

Mitotic-chromosome-based physical mapping of the Culex quinquefasciatus genome

The genome assembly of southern house mosquito Cx. quinquefasciatus is represented by a high number of supercontigs with no order or orientation on the chromosomes. Although cytogenetic maps for the polytene chromosomes of this mosquito have been developed, their utilization for the genome mapping remains difficult because of the low number of high-quality spreads in chromosome preparations. Therefore, a simple and robust mitotic-chromosome-based approach for the genome mapping of Cx. quinquefasciatus still needs to be developed. In this study, we performed physical mapping of 37 genomic supercontigs using fluorescent in situ hybridization on mitotic chromosomes from imaginal discs of 4th instar larvae. The genetic linkage map nomenclature was adopted for the chromosome numbering based on the direct positioning of 58 markers that were previously genetically mapped. The smallest, largest, and intermediate chromosomes were numbered as 1, 2, and 3, respectively. For idiogram development, we analyzed and described in detail the morphology and proportions of the mitotic chromosomes. Chromosomes were subdivided into 19 divisions and 72 bands of four different intensities. These idiograms were used for mapping the genomic supercontigs/genetic markers. We also determined the presence of length polymorphism in the q arm of sex-determining chromosome 1 in Cx. quinquefasciatus related to the size of ribosomal locus. Our physical mapping and previous genetic linkage mapping resulted in the chromosomal assignment of 13% of the total genome assembly to the chromosome bands. We provided the first detailed description, nomenclature, and idiograms for the mitotic chromosomes of Cx. quinquefasciatus. Further application of the approach developed in this study will help to improve the quality of the southern house mosquito genome.

Genomic composition and evolution of Aedes aegypti chromosomes revealed by the analysis of physically mapped supercontigs

BACKGROUND

An initial comparative genomic study of the malaria vector Anopheles gambiae and the yellow fever mosquito Aedes aegypti revealed striking differences in the genome assembly size and in the abundance of transposable elements between the two species. However, the chromosome arms homology between An. gambiae and Ae. aegypti, as well as the distribution of genes and repetitive elements in chromosomes of Ae. aegypti, remained largely unexplored because of the lack of a detailed physical genome map for the yellow fever mosquito.

RESULTS

Using a molecular landmark-guided fluorescent in situ hybridization approach, we mapped 624 Mb of the Ae. aegypti genome to mitotic chromosomes. We used this map to analyze the distribution of genes, tandem repeats and transposable elements along the chromosomes and to explore the patterns of chromosome homology and rearrangements between Ae. aegypti and An. gambiae. The study demonstrated that the q arm of the sex-determining chromosome 1 had the lowest gene content and the highest density of minisatellites. A comparative genomic analysis with An. gambiae determined that the previously proposed whole-arm synteny is not fully preserved; a number of pericentric inversions have occurred between the two species. The sex-determining chromosome 1 had a higher rate of genome rearrangements than observed in autosomes 2 and 3 of Ae. aegypti.

CONCLUSIONS

The study developed a physical map of 45% of the Ae. aegypti genome and provided new insights into genomic composition and evolution of Ae. aegypti chromosomes. Our data suggest that minisatellites rather than transposable elements played a major role in rapid evolution of chromosome 1 in the Aedes lineage. The research tools and information generated by this study contribute to a more complete understanding of the genome organization and evolution in mosquitoes.

Fluorescent in situ hybridization on mitotic chromosomes of mosquitoes

Fluorescent in situ hybridization (FISH) is a technique routinely used by many laboratories to determine the chromosomal position of DNA and RNA probes. One important application of this method is the development of high-quality physical maps useful for improving the genome assemblies for various organisms. The natural banding pattern of polytene and mitotic chromosomes provides guidance for the precise ordering and orientation of the genomic supercontigs. Among the three mosquito genera, namely Anopheles, Aedes, and Culex, a well-established chromosome-based mapping technique has been developed only for Anopheles, whose members possess readable polytene chromosomes. As a result of genome mapping efforts, 88% of the An. gambiae genome has been placed to precise chromosome positions. Two other mosquito genera, Aedes and Culex, have poorly polytenized chromosomes because of significant overrepresentation of transposable elements in their genomes. Only 31 and 9% of the genomic supercontings have been assigned without order or orientation to chromosomes of Ae. aegypti and Cx. quinquefasciatus, respectively. Mitotic chromosome preparation for these two species had previously been limited to brain ganglia and cell lines. However, chromosome slides prepared from the brain ganglia of mosquitoes usually contain low numbers of metaphase plates. Also, although a FISH technique has been developed for mitotic chromosomes from a cell line of Ae. aegypti, the accumulation of multiple chromosomal rearrangements in cell line chromosomes makes them useless for genome mapping. Here we describe a simple, robust technique for obtaining high-quality mitotic chromosome preparations from imaginal discs (IDs) of 4th instar larvae which can be used for all three genera of mosquitoes. A standard FISH protocol is optimized for using BAC clones of genomic DNA as a probe on mitotic chromosomes of Ae. aegypti and Cx. quinquefasciatus, and for utilizing an intergenic spacer (IGS) region of ribosomal DNA (rDNA) as a probe on An. gambiae chromosomes. In addition to physical mapping, the developed technique can be applied to population cytogenetics and chromosome taxonomy/systematics of mosquitoes and other insect groups.

RDNA sequences of Anopheles species from the Iberian Peninsula and an evaluation of the 18S rRNA gene as phylogenetic marker in anophelinae

The complete 18S rDNA and internal transcribed spacer (ITS)-2 rDNA sequences were obtained from Anopheles atroparvus Van Thiel and Anopheles plumbeus Stephens from two areas of Spain. The number of nucleotide differences in the 18S rDNA of the two species is high compared with differences in the same gene of other invertebrate vectors. In Anopheles, short 18S rDNA sequences are richer in AT than the longer sequences, which are richer in GC and include extremely GC-biased expanded regions. Four small regions in the variable regions V4 and V7 contain the majority of nucleotide differences. The results did not support the use of partial sequences for relationship analyses. Genetic distances and phylogenetic analyses supported the most recent classification of Anopheles. The complete 18S rDNA sequence is better for studying anopheline phylogenetics.

Formation and loss of large, unstable tandem arrays of the piggyBac transposable element in the yellow fever mosquito, Aedes aegypti

The Class II transposable element, piggyBac, was used to transform the yellow fever mosquito, Aedes aegypti. In two transformed lines only 15-30% of progeny inherited the transgene, with these individuals displaying mosaic expression of the EGFP marker gene. Southern analyses, gene amplification of genomic DNA, and plasmid rescue experiments provided evidence that these lines contained a high copy number of piggyBac transformation constructs and that much of this DNA consisted of both donor and helper plasmids. A detailed analysis of one line showed that the majority of piggyBac sequences were unit-length donor or helper plasmids arranged in a large tandem array that could be lost en masse in a single generation. Despite the presence of a transposase source and many intact donor elements, no conservative (cut and paste) transposition of piggyBac was observed in these lines. These results reveal one possible outcome of uncontrolled and/or unexpected recombination in this mosquito, and support the conclusion that further investigation is necessary before transposable elements such as piggyBac can be used as genetic drive mechanisms to move pathogen-resistance genes into mosquito populations.

Aedes aegypti genomics

The mosquito, Aedes aegypti, is the primary, worldwide arthropod vector for the yellow fever and dengue viruses. As it is also one of the most tractable mosquito species for laboratory studies, it has been and remains one of the most intensively studied arthropod species. This has resulted in the development of detailed genetic and physical maps for Ae. aegypti and considerable insight into its genome organization. The research community is well-advanced in developing important molecular tools that will facilitate a whole genome sequencing effort. This includes generation of BAC clone end sequences, physical mapping of selected BAC clones and generation of EST sequences. Whole genome sequence information for Ae. aegypti will provide important insight into mosquito chromosome evolution and allow for the identification of genes and gene function. These functions may be common to all mosquitoes or perhaps unique to individual species, possibly specific to host-seeking and blood-feeding behaviors, as well as the innate immune response to pathogens encountered during blood-feeding. This information will be invaluable to the global effort to develop novel strategies for preventing arthropod-borne disease transmission.

Physical mapping of barley genes using an ultrasensitive fluorescence in situ hybridization technique

The primary objective of this study was to elucidate gene organization and to integrate the genetic linkage map for barley (Hordeum vulgare L.) with a physical map using ultrasensitive fluorescence in situ hybridization (FISH) techniques for detecting signals from restriction fragment length polymorphism (RFLP) clones. In the process, a single landmark plasmid, p18S5Shor, was constructed that identified and oriented all seven of the chromosome pairs. Plasmid p18S5Shor was used in all hybridizations. Fourteen cDNA probes selected from the linkage map for barley H. vulgare 'Steptoe' x H. vulgare 'Morex' (Kleinhofs et al. 1993) were mapped using an indirect tyramide signal amplification technique and assigned to a physical location on one or more chromosomes. The haploid barley genome is large and a complete physical map of the genome is not yet available; however, it was possible to integrate the linkage map and the physical locations of these cDNAs. An estimate of the ratio of base pairs to centimorgans was an average of 1.5 Mb/cM in the distal portions of the chromosome arms and 89 Mb/cM near the centromere. Furthermore, while it appears that the current linkage maps are well covered with markers along the length of each arm, the physical map showed that there are large areas of the genome that have yet to be mapped.

Malpighian tubule polytene chromosomes of Culex quinquefasciatus (Diptera, Culicinae)

Dipteran polytene chromosomes provide an excellent model for understanding in species complexes, as well as for structural and functional cytogenetics. The status of species in the Culex pipiens complex is controversial and the use of polytene chromosomes for cytogenetic analysis in the subfamily Culicinae has been difficult because of methodological problems. In this study, Malpighian tubule polytene chromosomes were obtained from young (0 to 12 h, 20 C) and old (20 to 42 h, 28 C) laboratory-bred C. pipiens quinquefasciatus pupae. The chromosome maps for this species were constructed and compared with published data for C. pipiens pipiens and C. p. quinquefasciatus. Although the banding patterns were conserved between subspecies, analysis of the structural variations in the bands and interbands revealed differences apparently related to the physiological stage and ecogeographical strain. The organization of the centromeric regions in larval and pupal chromosomes showed greater similarity to each other than did those of pupal and adult chromosomes. The use of pupal polytene chromosomes for in situ hybridization with vector competence probes is discussed.

A technique for preparing polytene chromosomes from Aedes aegypti (Diptera, Culicinae)

Polytene chromosome preparations were obtained from larval, pupal and adult female Malpighian tubules of Aedes aegypti. The Malpighian tubules of the pupae (0-4 h old) from larvae reared at 20 C provided the best cytogenetic analysis. The interaction of nucleic acids and proteins that influence the spreading of the chromosomes could be reduced with the preparation technique of the sheets submitted to a stronger treatment starting with the hypotony of tissue and successive bathings with acetic acid. A simple technique should facilitate molecular cytogenetics used in the location of resistance and vector competence genes.

Detection of a single copy gene on a mitotic metaphase chromosome by fluorescence in situ hybridization (FISH) in the sawfly, Athalia rosae (Hymenoptera)

Mitotic metaphase chromosomes of Athalia rosae (Hymenoptera) haploid males were subjected to fluorescence in situ hybridization (FISH) analysis using an rDNA probe and two vitellogenin (Vg) cDNA probes (one representing the 5' half and the other the 3' half of the gene, each about 3 kb long, and together covering the entire coding region). The rDNA probe produced signals in four chromosomes, all in pericentromeric regions (haploid chromosome number = 8), and the Vg probes, either the combined probes or the 3' region alone, produced a twin signal in the middle of a chromosome arm of a single chromosome. Arch.

Transcripts of the malaria vector Anopheles gambiae that are differentially regulated in the midgut upon exposure to invasive stages of Plasmodium falciparum

Understanding the interactions between the most deadly malaria parasite, Plasmodium falciparum, and its main vector, Anopheles gambiae, would be of great help in developing new malaria control strategies. The malaria parasite undergoes several developmental transitions in the mosquito midgut and suffers population losses to which mosquito factors presumably contribute. To identify such factors, we analysed An. gambiae midgut transcripts whose expression is regulated upon ingestion of invasive or non-invasive forms of P. falciparum using a differential display approach. Sixteen cDNA were studied in detail; 12 represent novel genes of An. gambiae including a gene encoding profilin. Four transcripts were specifically regulated by P. falciparum gametocytes (invasive forms), whereas the others were regulated by either non-invasive or both non-invasive and invasive forms of the parasite. This differential regulation of some genes may reflect the adaptation of P. falciparum to its natural vector. These genes may be involved in the development of P. falciparum in An. gambiae or in the defence reaction of the mosquito midgut towards the parasite.

Integration of the Aedes aegypti mosquito genetic linkage and physical maps

Two approaches were used to correlate the Aedes aegypti genetic linkage map to the physical map. STS markers were developed for previously mapped RFLP-based genetic markers so that large genomic clones from cosmid libraries could be found and placed to the metaphase chromosome physical maps using standard FISH methods. Eight cosmids were identified that contained eight RFLP marker sequences, and these cosmids were located on the metaphase chromosomes. Twenty-one cDNAs were mapped directly to metaphase chromosomes using a FISH amplification procedure. The chromosome numbering schemes of the genetic linkage and physical maps corresponded directly and the orientations of the genetic linkage maps for chromosomes 2 and 3 were inverted relative to the physical maps. While the chromosome 2 linkage map represented essentially 100% of chromosome 2, approximately 65% of the chromosome 1 linkage map mapped to only 36% of the short p-arm and 83% of the chromosome 3 physical map contained the complete genetic linkage map. Since the genetic linkage map is a RFLP cDNA-based map, these data also provide a minimal estimate for the size of the euchromatic regions. The implications of these findings on positional cloning in A. aegypti are discussed.

Structure and location of a ferritin gene of the yellow fever mosquito Aedes aegypti

We have isolated and sequenced a genomic clone encoding the 24- and 26-kDa ferritin subunits in the mosquito Aedes aegypti (Rockefeller strain). The A. aegypti gene differs from other known ferritin genes in that it possesses an additional intron and an unusually large second intron. The additional intron is located within the 5' untranslated region, between the CAP site and the start codon. The second intron contains numerous putative transposable elements. In addition, unlike the human and rat ferritin genes, the A. aegypti ferritin gene is a single copy gene, located at 88.3% FLpter on the q-arm of chromosome 1. Primer extension analysis indicates that the A. aegypti ferritin gene has multiple transcriptional start sites. A differential usage of these sites is observed with varied cellular iron concentrations.

A linkage map of the turnip sawfly Athalia rosae (Hymenoptera: Symphyta) based on random amplified polymorphic DNAs

A linkage map was constructed for the sawfly, Athalia rosae (Hymenoptera), based on the segregation of random amplified polymorphic DNA (RAPD) markers and a visible mutation, yellow fat body (yfb). Forty haploid male progeny (20 yfb and 20+) from a single diploid female parent (yfb/+) were examined. Sixty-one of the 180 arbitrary primers tested by polymerase chain reaction (PCR) produced one or more RAPD bands. A total of 79 RAPD markers were detected. Of these, seven showed significant deviation from the expected 1:1 ratio, and were therefore excluded from further analysis. The remaining 72 RAPD markers and the marker mutation, yfb, were subjected to linkage analysis. Sixty RAPD markers and the yfb marker were organized into 16 linkage groups, spanning a distance of 517.2 cM. Twelve RAPD markers showed no linkage relationship to any group. Thirteen gel-purified RAPD bands were cloned and sequenced to generate the sequence-tagged sites (STSs). A single locus was represented by two markers, with one of them having a short internal deletion.

Genetics of mosquito vector competence

Mosquito-borne diseases are responsible for significant human morbidity and mortality throughout the world. Efforts to control mosquito-borne diseases have been impeded, in part, by the development of drug-resistant parasites, insecticide-resistant mosquitoes, and environmental concerns over the application of insecticides. Therefore, there is a need to develop novel disease control strategies that can complement or replace existing control methods. One such strategy is to generate pathogen-resistant mosquitoes from those that are susceptible. To this end, efforts have focused on isolating and characterizing genes that influence mosquito vector competence. It has been known for over 70 years that there is a genetic basis for the susceptibility of mosquitoes to parasites, but until the advent of powerful molecular biological tools and protocols, it was difficult to assess the interactions of pathogens with their host tissues within the mosquito at a molecular level. Moreover, it has been only recently that the molecular mechanisms responsible for pathogen destruction, such as melanotic encapsulation and immune peptide production, have been investigated. The molecular characterization of genes that influence vector competence is becoming routine, and with the development of the Sindbis virus transducing system, potential antipathogen genes now can be introduced into the mosquito and their effect on parasite development can be assessed in vivo. With the recent successes in the field of mosquito germ line transformation, it seems likely that the generation of a pathogen-resistant mosquito population from a susceptible population soon will become a reality.

First-generation physical map of the Culicoides variipennis (Diptera: Ceratopogonidae) genome

Recombinant cosmids labeled with biotin-11-dUTP or digoxigenin by nick translation were used as in situ hybridization probes to metaphase chromosomes of Culicoides variipennis (Coquillett). Paired fluorescent signals were detected on each arm of sister chromatids and were ordered along the 3 chromosomes. Thirty-three unique probes were mapped to the 3 chromosomes of C. variipennis (2n = 6): 7 to chromosome 1, 20 to chromosome 2, and 6 to chromosome 3. This work represents the first stage in generating a physical map of the genome of C. variipennis.

Vertebrate exon trapping methods: implications for transcript mapping with mosquito DNA

Exon trapping methods have played an important role in the development of transcript maps. In one in vivo vertebrate method, exons in a genomic DNA clone are transcribed, and they are recovered without any a priori information on the nature of the expressed transcript. The only requirement is that the genomic DNA clone contains exons separated by intervening introns that are removed by splicing during mRNA transcription and that the splice donor and acceptor site sequences follow those used by vertebrates. It is not known whether invertebrate splice donor and acceptor sites from genes that contain short introns will be processed correctly using an in vivo vertebrate exon trapping method. In this report, an analysis of mosquito splice sites using software designed to identify exons in genomic DNA sequence suggested that the vertebrate exon trapping method could recognize mosquito introns and exons. When a mosquito genomic DNA clone containing the D7 gene was tested experimentally, this method failed to recognize and process small introns (< 63 bp) faithfully. In spite of this failure, exons and exon fragments were recovered. The implications of these findings and their application to map-based positional cloning in mosquito genomics is discussed.

Fluorescence in situ hybridization landmarks for chromosomes of culicoides variipennis (Diptera: Ceratopogonidae)

Because the three chromosomes of Culicoides variipennis (Coquillett) are morphologically indistinguishable, physical landmarks were needed so that the chromosomes can be identified uniquely and oriented unambiguously before initiating the construction of a physical map based on FISH (fluorescence in situ hybridization). When repetitive sequence clones p1887 and K8.1a8 were labeled with digoxigenin and probe K8a.2G2 was labeled with biotin-11-dUTP and digoxigenin, the 3 chromosomes could be differentiated unambiguously when visualized with specific band-pass filters. This provided the basis for C. variipennis FISH landmark probes that enabled the identification and orientation of all 3 pairs of chromosomes. Using this multicolor FISH labeling strategy, probes that provide unique landmarks for the C. variipennis FISH physical map have been found and may be used in all FISH reactions where an unknown probe is placed to metaphase chromosomes of C. variipennis. A physical map of the C. variipennis genome will provide the foundation for map-based positional cloning of the gene(s) that control vector competence for the bluetongue viruses.