Cytotoxicity of materials used in perforation repair tested using the V79 fibroblast cell line and the granulocyte-macrophage progenitor cells

Calcium silicate-based cements cause environmental stiffness and show diverse potential to induce osteogenesis in human osteoblastic cells

Calcium silicate-based cements differ markedly in their radiopacifiers and the presence of calcium sulfate, aluminates, carbonates and other components that can affect their biological properties. This study aimed to compare the biological properties of six calcium silicate cements in human osteoblastic cell culture (Saos-2 cells): Bio-C Repair (Bio-C), PBS HP (PBS-HP), Biodentine (Biodentine), MTA Repair HP (MTA-HP), NeoMTA Plus (NeoMTA-P), and ProRoot MTA (ProRoot). After exposure to these materials, the cells were analyzed by MTT, wound healing, cell migration, and alkaline phosphatase activity (ALP) assays, real-time PCR (qPCR) analysis of the osteogenesis markers (osteocalcin or bone gamma-carboxyglutamate protein, BGLAP; alkaline phosphatase, ALPL; bone sialoprotein or secreted phosphoprotein 1, BNSP), and alizarin red staining (ARS). Curiously, the migration rates were low 24-48 h after exposure to the materials, despite the cells showing ideal rates of viability. The advanced and intermediate cell differentiation markers BGLAP and BNSP were overexpressed in the Bio-C, MTA-HP, and ProRoot groups. Only the Biodentine group showed ALPL overexpression, a marker of initial differentiation. However, the enzymatic activity was high in all groups except Biodentine. The mineralization area was significantly large in the NeoMTA-P, ProRoot, PBS-HP, MTA-HP, and Bio-C groups. The results showed that cellular environmental stiffness, which impairs cell mobility and diverse patterns of osteogenesis marker expression, is a consequence of cement exposure. Environmental stiffness indicates chemical and physical stimuli in the microenvironment; for instance, the release of cement compounds contributes to calcium phosphate matrix formation with diverse stiffnesses, which could be essential or detrimental for the migration and differentiation of osteoblastic cells. Cells exposed to Bio-C, PBS-HP, ProRoot, NeoMTA-P, and MTA-HP seemed to enter the advanced or intermediate differentiation phases early, which is indicative of the diverse potential of cements to induce osteogenesis. Cements that quickly stimulate osteoblast differentiation may be ideal for reparative and regenerative purposes since they promptly lead to dentin or bone deposition.

MTT versus other cell viability assays to evaluate the biocompatibility of root canal filling materials: a systematic review

OBJECTIVES

This systematic review aimed to compare the cytotoxicity of root canal filling materials (RCFMs) assessed using tetrazolium salt-based tests (TSBT), including the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay, with those obtained using other cell viability assays.

METHODS

A search was performed on PubMed, Scopus, Web of Science and OpenGrey up to March 2019, followed by a manual search. According to the Participants, Exposure, Comparator and Outcomes (PECO) criteria, in vitro studies that evaluated the cytotoxic effect of RCFMss on animal and/or human cells through TSBT and at least one other viability assay were compared. The methodological quality of selected papers was assessed using ToxRTool^® and SciRAP^® . Data were analysed using Wilcoxon's signed-rank test for paired samples and linear weighting kappa.

RESULTS

A total of 230 non-duplicated records were identified. After applying the eligibility criteria, 55 studies were selected for methodological evaluation, seven were selected by manual searching, 22 were excluded for methodological reasons, and 40 were included. A total of 410 comparisons were performed between TSBT and distinct cell viability tests (DCVT). MTT had moderate concordance with DCVT using human cells (n = 138 samples) (P = 0.507; k = 0.4225) and animal cells (n = 122 samples) (P = 0.124; k = 0.5775). XTT had good concordance using human (n = 110 samples) (P = 0.507; k = 0.6336) and animal cells (n = 12 samples) (P = 0.564; k = 0.6604). MTT, XTT, WST and MTS assays showed moderate concordance with DCVT (n = 410 samples) (P = 0.375; k = 0.5138) and complete agreement in 226 samples.

DISCUSSION

The included studies had methodological heterogeneity that was minimized by the systematic review methodology.

CONCLUSIONS

MTT and XTT do not cause over- or underestimation of cell viability during cytotoxicity screening of root canal filling materials, implying that these assays can be considered reliable for this purpose. Nonetheless, the development of protocols for the cytotoxic screening of these materials on 3D tissue-like cultures aiming to improve their predictability in the clinical scenario is suggested.

Clinical evaluation of combined surgical/ restorative treatment of gingival recession-type defects using different restorative materials: A randomized clinical trial

Background/purpose

An ideal therapeutic procedure for the treatment of gingival recession associated with an NCCL has presented a challenge to clinicians. Various dental materials and surgical approaches have been used to manage gingival recessions associated with NCCLs for the most predictable combined surgical/restorative treatment. The objective of this study was to evaluate the treatment of gingival recessions associated with non-carious cervical lesions (NCCL) using a modified coronally advanced flap (MCAF) in combination with a connective tissue graft (CTG) on restored root surfaces.

Materials and methods

Twenty-three systemically healthy subjects, who were positive for the presence of three cervical lesions associated with gingival recessions in three different adjacent teeth, were enrolled in the study. The NCCL were each restored prior to surgery by using one of three different materials: nanofilled composite resin (NCR), resin-modified glass ionomer cement (RMGI) or giomer. The gingival recession defects were treated by CTG.

Results

Inter-group differences were not statistically significant for probing depth (PD), relative recession height (rRH), relative clinical attachment level (rCAL), keratinized tissue width (KTW) or keratinized tissue thickness (KTT) (p > 0.05) among the groups at any time. The mean percentage of defect coverage was 71.18 ± 23.16% for NCR + CTG group; 71.33 ± 22.33% for RMGI + CTG group; and 64.23 ± 20.33% for giomer + CTG group at 1 year postoperatively (p > 0.05).

Conclusion

The combined surgical/restorative treatments provided successful clinical results. Giomer + CTG may be less effective compared to other groups for treatment of gingival recession associated with NCCL.

The use of Bioceramics as root-end filling materials in periradicular surgery: A literature review

Introduction

Periradicular surgery involves the placement of a root-end filling following root-end resection, to provide an apical seal to the root canal system. Historically several materials have been used in order to achieve this seal. Recently a class of materials known as Bioceramics have been adopted. The aim of this article is to provide a review of the outcomes of periradicular surgery when Bioceramic root-end filling materials are used on human permanent teeth in comparison to "traditional" materials.

Methods & results

An electronic literature search was performed in the databases of Web of Science, PubMed and Google Scholar, between 2006 and 2017, to collect clinical studies where Bioceramic materials were utilised as retrograde filling materials, and to compare such materials with traditional materials. In this search, 1 systematic review and 14 clinical studies were identified. Of these, 8 reported the success rates of retrograde Bioceramics, and 6 compared treatment outcomes of mineral trioxide aggregate (MTA) and traditional cements when used as root-end filling materials.

Conclusion

Bioceramic root-end filling materials are shown to have success rates of 86.4-95.6% (over 1-5 years). Bioceramics has significantly higher success rates than amalgam, but they were statistically similar to intermediate restorative material (IRM) and Super ethoxybenzoic acid (Super EBA) when used as retrograde filling materials in apical surgery. However, it seems that the high success rates were not solely attributable to the type of the root-end filling materials. The surgical/microsurgical techniques and tooth prognostic factors may significantly affect treatment outcome.

Mineral Trioxide Aggregate-A Review of Properties and Testing Methodologies

Mineral trioxide aggregate (MTA) restoratives and MTA sealers are commonly used in endodontics. Commonly referenced standards for testing of MTA are ISO 6876, 9917-1 and 10993. A PubMed search was performed relating to the relevant tests within each ISO and "mineral trioxide aggregate". MTA restoratives are typically tested with a mixture of tests from multiple standards. As the setting of MTA is dependent upon hydration, the results of various MTA restoratives and sealers are dependent upon the curing methodology. This includes physical properties after mixing, physical properties after setting and biocompatibility. The tests of flow, film thickness, working time and setting time can be superseded by rheology as it details how MTA hydrates. Physical property tests should replicate physiological conditions, i.e. 37 °C and submerged in physiological solution. Biocompatibility tests should involve immediate placement of samples immediately after mixing rather than being cured prior to placement as this does not replicate clinical usage. Biocompatibility tests should seek to replicate physiological conditions with MTA tested immediately after mixing.

Activation of the low molecular weight protein tyrosine phosphatase in keratinocytes exposed to hyperosmotic stress

Herein, we provide new contribution to the mechanisms involved in keratinocytes response to hyperosmotic shock showing, for the first time, the participation of Low Molecular Weight Protein Tyrosine Phosphatase (LMWPTP) activity in this event. We reported that sorbitol-induced osmotic stress mediates alterations in the phosphorylation of pivotal cytoskeletal proteins, particularly Src and cofilin. Furthermore, an increase in the expression of the phosphorylated form of LMWPTP, which was followed by an augment in its catalytic activity, was observed. Of particular importance, these responses occurred in an intracellular milieu characterized by elevated levels of reduced glutathione (GSH) and increased expression of the antioxidant enzymes glutathione peroxidase and glutathione reductase. Altogether, our results suggest that hyperosmostic stress provides a favorable cellular environment to the activation of LMWPTP, which is associated with increased expression of antioxidant enzymes, high levels of GSH and inhibition of Src kinase. Finally, the real contribution of LMWPTP in the hyperosmotic stress response of keratinocytes was demonstrated through analysis of the effects of ACP1 gene knockdown in stressed and non-stressed cells. LMWPTP knockdown attenuates the effects of sorbitol induced-stress in HaCaT cells, mainly in the status of Src kinase, Rac and STAT5 phosphorylation and activity. These results describe for the first time the participation of LMWPTP in the dynamics of cytoskeleton rearrangement during exposure of human keratinocytes to hyperosmotic shock, which may contribute to cell death.

In vitro toxicity of formocresol, ferric sulphate, and grey MTA on human periodontal ligament fibroblasts

AIM

This was to assess and compare the in vitro toxicity of formocresol, ferric sulphate and MTA on cultured human periodontal ligament (PDL) fibroblasts.

STUDY DESIGN

PDL cells were obtained from sound first permanent molars and cultured in Dulbecco's modified Eagle's medium.

METHODS

PDL cells were subjected to different concentrations of formocresol, ferric sulphate, and grey MTA for 24, 48, and 72 h at 37 °C. Cells that were not exposed to the tested materials served as the negative control. In vitro toxicity was assessed using MTT assay.

STATISTICS

Statistical analysis of data was accomplished using ANOVA and Tukey statistical tests (p<0.05).

RESULTS

The overall toxicity ranking of the tested materials was as follows: formocresol>ferric sulphate>grey MTA. Only grey MTA had comparable cell viability to the negative control, the other tested materials were significantly inferior at the three exposure periods (p<0.05).

CONCLUSION

Regarding the viability of PDL fibroblasts, MTA stands as the most promising substitute to formocresol. However, considering MTA's unavailability and high price in Jordan, ferric sulphate may be the best alternative to formocresol in pulpotomy of primary teeth.

Biocompatibility of root-end filling materials: recent update

The purpose of a root-end filling is to establish a seal between the root canal space and the periradicular tissues. As root-end filling materials come into contact with periradicular tissues, knowledge of the tissue response is crucial. Almost every available dental restorative material has been suggested as the root-end material of choice at a certain point in the past. This literature review on root-end filling materials will evaluate and comparatively analyse the biocompatibility and tissue response to these products, with primary focus on newly introduced materials.

Biomimetic calcium-silicate cements support differentiation of human orofacial mesenchymal stem cells

INTRODUCTION

Human orofacial bone mesenchymal stem cells (OFMSCs) from maxilla and mandible have robust osteogenic regenerative properties on the basis of our previous reports that demonstrate phenotypic and functional differences between jaw and axial bone mesenchymal stem cells in same individuals. Furthermore, a combination of OFMSCs with bioactive calcium-releasing cements can potentially improve OFMSC multilineage differentiation capacity, but biocompatibility of calcium-silicate cements with OFMSCs is still unclear. We tested the hypothesis that material extracts of calcium-releasing calcium-silicate cements support biomimetic microenvironment for survival and differentiation of human OFMSCs.

METHODS

Two experimental calcium-silicate cements, (1) calcium-silicate mineral powder (wTC) containing dicalcium and tricalcium-silicate, calcium sulfate, and calcium chloride and (2) wTC doped with alpha-tricalcium phosphate (wTC-αTCP), were designed and prepared. Cement setting times were assessed by Gilmore needles, ability to release calcium and hydroxyl ions was assessed by potentiometric methods, and OFMSC attachment to calcium-silicate discs was assessed. Calcium-silicate material extracts were tested for ability to support OFMSC survival and in vitro/in vivo differentiation.

RESULTS

Fewer OFMSCs attached to calcium-silicate discs relative to tissue culture plastic (P = .001). Extracts of calcium-silicate cements sustained OFMSC survival, maintained steady state levels of vascular cell adhesion molecule-1, alkaline phosphatase, and bone sialoprotein while up-regulating their respective gene transcripts. Adipogenic and in vivo bone regenerative capacities of OFMSCs were also unaffected by calcium-silicate extracts.

CONCLUSIONS

Ion-releasing calcium-silicate cements support a biomimetic microenvironment conducive to survival and differentiation of OFMSCs. Combination of OFMSCs and calcium-silicate cement can potentially promote tissue regeneration in periapical bone defects.

Mineral trioxyde aggregate versus calcium hydroxide in apexification of non vital immature teeth: study protocol for a randomized controlled trial

Background

Pulp necrosis is one of the main complications of dental trauma. When it happens on an immature tooth, pulp necrosis implies a lack of root maturation and apical closure. A therapy called apexification is required to induce the formation of a calcified apical barrier allowing a permanent and hermetic root filling. The aim of this prospective randomized clinical trial is to compare Mineral Trioxide Aggregate(MTA)with Calcium Hydroxide(CH)as materials used to induce root-end closure in necrotic permanent immature incisors.

Methods/Design

This study, promoted by AP-HP, was approved by the ethics committee(CPP Paris Ile de France IV). 34 children aged from 6 to 18 years and presenting a non-vital permanent incisor are selected. Prior to treatment, an appropriate written consent has to be obtained from both parents and from children. Patients are then randomly assigned to either the MTA(experimental)or CH(control)groups. Recalls are performed after 3, 6 and 12 months to determine the presence or absence of a calcified apical barrier through the use of clinical and radiographic exams. Additional criteria such as clinical symptoms, apical radiolucencies, periapical index(PAI)are also noted.

Trial registration

ClinicalTrials.gov no. NCT00472173 (First inclusion: May 10, 2007; Last inclusion: April 23, 2009; study completed: April 15, 2010)

The cytotoxic effects of resin-based sealers on dental pulp stem cells

AIM

To evaluate the effect of four current resin-based adhesives on expanded ex vivo human dental pulp mesenchymal stem cells (DP-MSCs).

METHODOLOGY

Dental pulp mesenchymal stem cells were derived from dental pulps of ten donors. After in vitro isolation, dental pulp stem cells were analysed using flow cytometry. The immunophenotype of DP-MSCs disclosed the homogeneous expression of the mesenchymal-related antigens CD29, CD44, CD73, CD90, CD105, CD166. DP-MSCs were exposed to four different commercially available bonding systems (CMF Bond, Prime&Bond NT, Clearfil S(3) Bond, XP Bond), and after 24, 48 and 72 h of incubation the morphological features and the cell growth were analysed. Moreover, the cell viability was evaluated at the same times by MTT assay. Data were statistically analysed using a two-way anova and Holm-Sidak method (alpha set at 0.05).

RESULTS

Significant differences were observed between the four groups when comparing DP-MSCs appearance. DP-MSCs survived and proliferated without inhibition in the presence of CMF Bond adhesive. On the contrary, microscopic evaluation of the other three groups revealed extensive cytotoxic effects from the dentine bonding agents. The MTT assay revealed no statistically significant differences in cell viability after 72 h between the control group and CMF Bond group. All the other experimental groups had statistically lower optical density values.

CONCLUSIONS

CMF Bond adhesive allowed human dental pulp stem cells to survive and proliferate. All of the other dentine bonding agents had extensive cytotoxic effects.