Sources of the adventitious microflora of a smear-ripened cheese

Deciphering Rind Color Heterogeneity of Smear-Ripened Munster Cheese and Its Association with Microbiota

Color is one of the first criteria to assess the quality of cheese. However, very limited data are available on the color heterogeneity of the rind and its relationship with microbial community structure. In this study, the color of a wide range of smear-ripened Munster cheeses from various origins was monitored during storage by photographic imaging and data analysis in the CIELAB color space using luminance, chroma, and hue angle as descriptors. Different levels of inter- and intra-cheese heterogeneity were observed. The most heterogeneous Munster cheeses were the darkest with orange-red colors. The most homogeneous were the brightest with yellow-orange. K-means clustering revealed three clusters distinguished by their color heterogeneity. Color analysis coupled with metabarcoding showed that rinds with heterogeneous color exhibited higher microbial diversity associated with important changes in their microbial community structure during storage. In addition, intra-cheese community structure fluctuations were associated with heterogeneity in rind color. The species Glutamicibacter arilaitensis and Psychrobacter nivimaris/piscatorii were found to be positively associated with the presence of undesirable brown patches. This study highlights the close relationship between the heterogeneity of the cheese rind and its microbiota.

Bacteriocinogenic anti-listerial properties and safety assessment of Enterococcus faecium and Lactococcus garvieae strains isolated from Brazilian artisanal cheesemaking environment

AIMS

This study aimed to prospect and isolate lactic acid bacteria (LAB) from an artisanal cheese production environment, to assess their safety, and to explore their bacteriocinogenic potential against Listeria monocytogenes.

METHODS AND RESULTS

Samples were collected from surfaces of an artisanal-cheese production facility and after rep-PCR and 16S rRNA sequencing analysis, selected strains were identified as to be belonging to Lactococcus garvieae (1 strain) and Enterococcus faecium (14 isolates, grouped into three clusters) associated with different environments (worktables, cheese mold, ripening wooden shelves). All of them presented bacteriocinogenic potential against L. monocytogenes ATCC 7644 and were confirmed as safe (γ-hemolytic, not presenting antibiotic resistance, no mucus degradation properties, and no proteolytic or gelatinase enzyme activity). Additionally, cell growth, acidification and bacteriocins production kinetics, bacteriocin stability in relation to different temperatures, pH, and chemicals were evaluated. According to performed PCR analysis all studied strains generated positive evidence for the presence of entA and entP genes (for production of enterocins A and enterocins P, respectively). However, pediocin PA-1 associated gene was recorded only in DNA obtained from E. faecium ST02JL and Lc. garvieae ST04JL.

CONCLUSIONS

It is worth considering the application of these safe LAB or their bacteriocins in situ as an alternative means of controlling L. monocytogenes in cheese production environments, either alone or in combination with other antimicrobials.

The Microbial Diversity on the Surface of Smear-Ripened Cheeses and Its Impact on Cheese Quality and Safety

Smear-ripened cheeses are characterized by a viscous, red-orange surface smear on their rind. It is the complex surface microbiota on the cheese rind that is responsible for the characteristic appearance of this cheese type, but also for the wide range of flavors and textures of the many varieties of smear-ripened cheeses. The surface smear microbiota also represents an important line of defense against the colonization with undesirable microorganisms through various types of interaction, such as competitive exclusion or production of antimicrobial substances. Predominant members of the surface smear microbiota are salt-tolerant yeast and bacteria of the phyla Actinobacteria, Firmicutes, and Proteobacteria. In the past, classical culture-based approaches already shed light on the composition and succession of microorganisms and their individual contribution to the typicity of this cheese type. However, during the last decade, the introduction and application of novel molecular approaches with high-resolution power provided further in-depth analysis and, thus, a much more detailed view of the composition, structure, and diversity of the cheese smear microbiota. This led to abundant novel knowledge, such as the identification of so far unknown community members. Hence, this review is summarizing the current knowledge of the diversity of the surface smear microbiota and its contribution to the quality and safety of smear-ripened cheese. If the succession or composition of the surface-smear microbiota is disturbed, cheese smear defects might occur, which may promote food safety issues. Hence, the discussion of cheese smear defects in the context of an increased understanding of the intricate surface smear ecosystem in this review may not only help in troubleshooting and quality control but also paves the way for innovations that can lead to safer, more consistent, and higher-quality smear-ripened cheeses.

Volatilome of brine-related microorganisms in a curd-based medium

The possible contribution of brine-derived microflora to the sensory attributes of cheese is still a rather unexplored field. In this study, 365 bacteria and 105 yeast strains isolated from 11 cheese brines were qualitatively tested for proteolytic and lipolytic activities, and positive strains were identified by sequencing. Among bacteria, Staphylococcus equorum was the most frequent, followed by Macrococcus caseolyticus and Corynebacterium flavescens. As for yeasts, Debaryomyces hansenii, Clavispora lusitaniae, and Torulaspora delbrueckii were most frequently identified. A total of 38% of bacteria and 59% of yeasts showed at least 1 of the metabolic activities tested, with lipolytic activity being the most widespread (81% of bacteria and 95% of yeasts). Subsequently 15 strains of bacteria and 10 yeasts were inoculated in a curd-based medium and assessed via headspace-solid phase microextraction coupled with gas chromatography-mass spectrometry to determine their volatilome. After a 30-d incubation at 12°C, most strains showed a viability increase of about 2 log cfu/mL, suggesting good adaptability to the cheese environment. A total of 26 compounds were detected in the headspace, carbonyl compounds and alcohols being the major contributors to the volatile profile of the curd-based medium. Multivariate analysis was carried out to elucidate the overall differences in volatiles produced by selected strains. Principal component analysis and hierarchical clustering analysis demonstrated that the brine-related microorganisms were separated into 3 different groups, suggesting their different abilities to produce volatile compounds. Some of the selected strains have been shown to have interesting aromatic potential and to possibly contribute to the sensory properties of cheese.

Microbiome Assembly in Fermented Foods

For thousands of years, humans have enjoyed the novel flavors, increased shelf-life, and nutritional benefits that microbes provide in fermented foods and beverages. Recent sequencing surveys of ferments have mapped patterns of microbial diversity across space, time, and production practices. But a mechanistic understanding of how fermented food microbiomes assemble has only recently begun to emerge. Using three foods as case studies (surface-ripened cheese, sourdough starters, and fermented vegetables), we use an ecological and evolutionary framework to identify how microbial communities assemble in ferments. By combining in situ sequencing surveys with in vitro models, we are beginning to understand how dispersal, selection, diversification, and drift generate the diversity of fermented food communities. Most food producers are unaware of the ecological processes occurring in their production environments, but the theory and models of ecology and evolution can provide new approaches for managing fermented food microbiomes, from farm to ferment.

The rotation of primary starter culture mixtures results in batch-to-batch variations during Gouda cheese production

Industrial production of Gouda cheeses mostly relies on a rotated use of different mixed-strain lactic acid bacteria starter cultures to avoid phage infections. However, it is unknown how the application of these different starter culture mixtures affect the organoleptic properties of the final cheeses. Therefore, the present study assessed the impact of three different starter culture mixtures on the batch-to-batch variations among Gouda cheeses from 23 different batch productions in the same dairy company. Both the cores and rinds of all these cheeses were investigated after 36, 45, 75, and 100 weeks of ripening by metagenetics based on high-throughput full-length 16S rRNA gene sequencing accompanied with an amplicon sequence variant (ASV) approach as well as metabolite target analysis of non-volatile and volatile organic compounds. Up to 75 weeks of ripening, the acidifying Lactococcus cremoris and Lactococcus lactis were the most abundant bacterial species in the cheese cores. The relative abundance of Leuconostoc pseudomesenteroides was significantly different for each starter culture mixture. This impacted the concentrations of some key metabolites, such as acetoin produced from citrate, and the relative abundance of non-starter lactic acid bacteria (NSLAB). Cheeses with the least Leuc. pseudomesenteroides contained more NSLAB, such as Lacticaseibacillus paracasei that was taken over by Tetragenococcus halophilus and Loigolactobacillus rennini upon ripening time. Taken together, the results indicated a minor role of leuconostocs in aroma formation but a major impact on the growth of NSLAB. The relative abundance of T. halophilus (high) and Loil. rennini (low) increased with ripening time from rind to core. Two main ASV clusters of T. halophilus could be distinguished, which were differently correlated with some metabolites, both beneficial (regarding aroma formation) and undesirable ones (biogenic amines). A well-chosen T. halophilus strain could be a candidate adjunct culture for Gouda cheese production.

Characterization of coagulase-negative staphylococci and macrococci isolated from cheese in Germany

Cheese, especially ripened varieties, harbor a very complex and heterogeneous microbiota. In addition to the desired microorganisms (starter cultures) added during cheese production, potentially harmful bacteria may also enter the production chain. Regarding the latter, the focus of this study was on coagulase-negative staphylococci (CNS) and Macrococcus caseolyticus. Both are known to harbor a variety of genes coding for antibiotic resistance, including mecA, mecB, mecC, and mecD. Coagulase-negative staphylococci or macrococci carrying such genes or other virulence factors should not be present in cheese. Cheese samples (101 in total) were collected from retail sources. Coagulase-negative staphylococci and M. caseolyticus were isolated utilizing selective agars, and species were identified by phenotypical tests and partial sequencing of the sodA gene. The results allowed identification of 53 CNS strains and 19 M. caseolyticus strains. Among the CNS, 11 isolates of Staphylococcus saprophyticus and one Staphylococcus epidermidis isolate were obtained. Both species are potential human pathogens and may thus adversely affect the safety of these food products. Screening for antimicrobial resistance was performed by application of disc diffusion tests, a gradient strip-test, and 14 different PCR tests. Evidence for methicillin resistance (by either positive disc diffusion assay for cefoxitin or by mec PCR) was found in CNS isolates and M. caseolyticus (9 isolates each). Regarding other virulence factors, no genetic determinants for coagulase or the most common staphylococcal enterotoxins sea, seb, sec, sed, and see were detected in any of the CNS or M. caseolyticus isolates by PCR testing. In conclusion, the presence of facultatively pathogenic CNS and carriers of genes for antibiotic resistance in both groups of microorganisms, especially mec genes, and the respective food safety issues need further evaluation and surveillance.

Virulent Phages Isolated from a Smear-Ripened Cheese Are Also Detected in Reservoirs of the Cheese Factory

Smear-ripened cheeses host complex microbial communities that play a crucial role in the ripening process. Although bacteriophages have been frequently isolated from dairy products, their diversity and ecological role in such this type of cheese remain underexplored. In order to fill this gap, the main objective of this study was to isolate and characterize bacteriophages from the rind of a smear-ripened cheese. Thus, viral particles extracted from the cheese rind were tested through a spot assay against a collection of bacteria isolated from the same cheese and identified by sequencing the full-length small subunit ribosomal RNA gene. In total, five virulent bacteriophages infecting Brevibacterium aurantiacum, Glutamicibacter arilaitensis, Leuconostoc falkenbergense and Psychrobacter aquimaris species were obtained. All exhibit a narrow host range, being only able to infect a few cheese-rind isolates within the same species. The complete genome of each phage was sequenced using both Nanopore and Illumina technologies, assembled and annotated. A sequence comparison with known phages revealed that four of them may represent at least new genera. The distribution of the five virulent phages into the dairy-plant environment was also investigated by PCR, and three potential reservoirs were identified. This work provides new knowledge on the cheese rind viral community and an overview of the distribution of phages within a cheese factory.

Analysis of Microbiota Persistence in Quebec's Terroir Cheese Using a Metabarcoding Approach

Environmental short amplicon sequencing, or metabarcoding, is commonly used to characterize the bacterial and fungal microbiota of cheese. Comparisons between different metabarcoding studies are complicated by the use of different gene markers. Here, we systematically compare different metabarcoding molecular targets using V3–V4 and V6–V8 regions of the bacterial 16S rDNA and fungal ITS1 and ITS2 regions. Taxonomic profiles varied depending on the molecular markers used. Based on data quality and detection capacity of the markers toward microorganisms usually associated with the dairy environment, the ribosomal regions V3–V4 and ITS2 were selected and further used to evaluate variability in the microbial ecosystem of terroir cheeses from the province of Quebec in Canada. Both fungal and bacterial ecosystem profiles were described for 32 different ready-to-eat bloomy-, washed- and natural-rind specialty cheese varieties. Among them, 15 were studied over two different production years. Using the Bray–Curtis dissimilarity index as an indicator of microbial shifts, we found that most variations could be explained by either a voluntary change in starter or ripening culture composition, or by changes in the cheesemaking technology. Overall, our results suggest the persistence of the microbiota between the two years studied—these data aid understanding of cheese microbiota composition and persistence during cheese ripening.

Metatranscriptomic Analyses Unravel Dynamic Changes in the Microbial and Metabolic Transcriptional Profiles in Artisanal Austrian Hard-Cheeses During Ripening

Vorarlberger Bergkäse (VB) is an artisanal Austrian washed-rind hard cheese produced from alpine cows' raw milk without the addition of ripening cultures. Ripening time is a key factor in VB, as it strongly influences the microbial communities present in the cheeses and the organoleptic properties of the product. In this study, the microbial and metabolic transcriptional profiles in VB rinds at different ripening times were investigated. VB products before (30 days of ripening) and after (90 days of ripening) selling were selected, RNA was extracted and subjected to shotgun metatranscriptomic sequencing. The analysis revealed some of the previously described abundant bacterial taxa of Brevibacterium, Corynebacterium, Halomonas, Psychrobacter, and Staphylococcus to be highly active in VB rinds. Additionally, the investigation of most important metabolic pathways in cheese ripening clearly showed differences in the gene transcription profiles and the active microbiota between the two ripening points investigated. At 30 days of ripening, metabolic events related with the degradation of residual lactose, lactate, citrate, proteolysis, and lipolysis were significantly more transcribed and mainly associated with Staphylococcus. On the other hand, genes involved in the degradation of smaller compounds derived from previous metabolism (i.e., metabolism of free amino acids and fatty acids) were significantly more expressed in VB rinds with 90 of ripening, and mainly associated with Brevibacterium and Corynebacterium. These latter metabolic activities are responsible of the generation of compounds, such as methanethiol and 2,3-butanediol, that are very important for the flavor and aroma characteristics of cheeses. This study shows the dynamic changes in the gene transcriptional profiles associated with energy substrates metabolism and the generation of organoleptic compounds during VB ripening and uncovers bacterial taxa as key drivers of the ripening process. These taxa might be the target for future studies toward an accelerated cheese ripening and the enhancement of its organoleptic properties.

High Prevalence of Enterobacterales in the Smear of Surface-Ripened Cheese with Contribution to Organoleptic Properties

The smear of surface-ripened cheese harbors complex microbiota mainly composed of typical Gram-positive aerobic bacteria and yeast. Gram-negative bacteria are usually classified as un-wanted contaminants. In order to investigate the abundance and impact of Gram-negative bacte-ria naturally occurring in the smear of surface-ripened cheese, we performed a culture-based analysis of smear samples from 15 semi-hard surface-ripened cheese varieties. The quantity, di-versity and species distribution of Proteobacteria in the surface smear of the analyzed cheese vari-eties were unexpectedly high, and comprised a total of 22 different species. Proteus and Morganella predominated most of the analyzed cheese varieties, while Enterobacter, Citrobacter, Hafnia and Serratia were also found frequently. Further physiological characterization of Proteus isolates re-vealed strong proteolytic activity, and the analysis of volatiles in the smear cheese surface head-space suggested that Enterobacterales produce volatile organic flavor compounds that contribute to the organoleptic properties of surface-ripened cheese. Autochthonous members of Enterobac-terales were found in 12 of the 15 smear samples from surface-ripened cheeses, suggesting that they are part of the typical house microbiota that shape the organoleptic properties of the cheese rather than represent unwanted contaminants. However, further investigation on safety issues of the individual species should be performed in order to manage the health risk for consumers.

Mycotoxigenic and phylogenetic perspective to the yeasts and filamentous moulds in mould-matured Turkish cheese

This study was conducted to determine the diversity of yeasts and filamentous moulds in mould-matured cheese (MMC) consumed in Turkey. Overall, 120 samples were collected from 12 different geographical locations between March 2016 and April 2017. The morphological observation was applied in combination with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) and molecular analyses to determine yeasts and filamentous moulds in the cheeses. High-performance liquid chromatography (HPLC) technique was used to evaluate the ability of mycotoxins production of fungal isolates and the presence of mycotoxins in cheese samples. A total of 241 fungi (81 filamentous moulds and 160 yeast) were recovered, and Penicillium roqueforti and Debaryomyces hansenii were the most frequently isolated species in all cheese samples. The rep-PCR results indicated a high level of genetic diversity among fungal isolates, regardless of isolation source or geographical origin. Filamentous mould strains isolated from MMC were found to synthesize at least one mycotoxin (Aflatoxin B₁, B₂, G₁ and G₂, citrinine, cyclopiazonic acid, mycophenolic acid, ochratoxin A, penicillic acid and roquefortine C). Although mycotoxin producing ability was observed from all isolates, none of the cheese samples were found positive for these mycotoxins. AFM₁ was detected in 8 (6.6%) MMC samples from which 2 (1.6%) were above the legal limits (0.05 μg/kg) set by the Turkish Food Codex (TFC) and European Commission (EC). In conclusion, Turkish MMCs were found to be contaminated with toxigenic fungi, so a potential public health risk, while low, exists. Therefore, the selection of nontoxigenic filamentous mould strains for cheese manufacturing and control of the ripening conditions is a critical need to ensure the quality and safety of Turkish MMC.

Identification of Red Pigments Produced by Cheese-Ripening Bacterial Strains of Glutamicibacter arilaitensis Using HPLC

Glutamicibacter arilaitensis is one of the predominant bacterial species involved in the coloration of cheese rinds, especially smear-ripened cheeses. Besides well-known yellow-pigmented carotenoids, this species exhibits an ability to produce red pigments, as the occurrence of pink/red formation was previously found when co-cultured with a fungal strain. In this work, the red pigments synthesized by G. arilaitensis strains grown on cheese-based (curd) solid medium deacidified using Debaryomyces hansenii were identified. The analyses using HPLC equipped with both fluorescence and diode array detectors were performed to characterize the pigments extracted from a dry matter of the medium inoculated with either G. arilaitensis Re117, Po102, or Stp101. Based on the UV–vis absorption spectra, the elution order, and fluorescent property, compared to those of the porphyrin standards, eight metal-free porphyrins, including UPI, UPIII, 7PI, 6PI, 5PI, CPI, CPIII, and MPIX, were indicated as components of the red pigments produced by these G. arilaitensis strains. However, following the chromatographic profiles, the degree of porphyrins formed by each strain was apparently different. Regardless of precise quantitative measurement, the type strains Re117 and Po102 manifested a potential to produce a high amount of CPIII, whereas MPIX was formed by the strains Po102 and Stp101, but exceptionally high by the strain Stp101. The variation in both yield and form of the red pigments synthesized by the cheese-related bacterial G. arilaitensis has not previously been reported; therefore, our results provide the first information on these aspects.

Characterizing the microbiota of wooden boards used for cheese ripening

•

The phyla Actinobacteria, Firmicutes, and Proteobacteria dominated the microbiota of the boards.

•

The boards displayed differences in both diversity and richness.

•

We identified 288 total operational taxonomic units (OTU), with 7 OTU forming a core microbiota across all boards.

•

The boards appeared to select for salt- and cold-tolerant bacteria.

Wooden boards are commonly used for aging artisan cheeses. Although considered critical to the development of desired flavors and aromas, knowledge about the microbial communities associated with these boards is limited. To begin to address this need, we performed a 16S ribosomal RNA analysis of the bacterial communities present on the surface and within 5 wooden boards used for cheese ripening that were obtained from 3 cheese-processing facilities. The 5 boards were dominated by bacteria in the phyla Actinobacteria, Firmicutes, and Proteobacteria and displayed differences in both diversity and richness. Analysis of these boards also identified significant board-to-board variation. A total of 288 operational taxonomic units were identified across all samples, with 7 operational taxonomic units forming a core microbiota across all boards. Taken together, these data reflect the cheese-ripening environment, which appears to select for salt- and cold-tolerant bacteria.

Antimicrobial Activity of Myrtus communis L. and Rosmarinus officinalis L. Essential Oils against Listeria monocytogenes in Cheese

Listeria monocytogenes has been referred to as a concern microorganism in cheese making due to its ability to survive and grow in a wide range of environmental conditions, such as refrigeration temperatures, low pH and high salt concentration at the end of the production process. Since cheese may be a potential hazard for consumers, especially high-risk consumers (e.g., pregnant, young children, the elderly, people with medical conditions), efforts of the dairy industry have been aimed at investigating new conservation techniques based on natural additives to meet consumers’ demands on less processed foods without compromising the food safety. Thus, the aim of this study was to evaluate the efficacy of Myrtus communis L. (myrtle) and Rosmarinus officinalis L. (rosemary) essential oils (EO) against Listeria monocytogenes ATCC 679 spiked in sheep cheese before ripening. After the cheesemaking process, the samples were stored at 8 °C for 2 h, 1 d, 3 d, 14 d and 28 d. The composition of EO was identified by gas chromatography-mass spectrometry (GC-MS) analysis. Constituents such as 1,8-cineole, limonene, methyl-eugenol, α-pinene, α-terpineol, α-terpinolene and β-pinene were present in both EO, accounting for 44.61% and 39.76% from the total of chemical compounds identified for myrtle and rosemary EO, respectively. According to the chemical classification, both EO were mainly composed of monoterpenes. Minimum inhibitory concentration (MIC) against L. monocytogenes was obtained at 31.25 μL/mL to myrtle EO and at 0.40 μL/mL to rosemary EO. Then, cheeses were inoculated with L. monocytogenes (Ca. 6 log CFU/mL) and EO was added at MIC value. The addition of rosemary and myrtle EO displayed lower counts of L. monocytogenes (p < 0.01) (about 1–2 log CFU/g) during the ripening period compared to control samples. Ripening only influences (p < 0.001) the growth of L. monocytogenes in control samples. Since rosemary and myrtle EO do not exert any negative impact on the growth of native microflora (p > 0.05), their use as natural antimicrobial additives in cheese demonstrated a potential for dairy processors to assure safety against L. monocytogenes.

Temporal differences in microbial composition of Époisses cheese rinds during ripening and storage

Époisses is a protected designation of origin smear-ripened cheese from the Burgundy region in France. It has an orange color and a strong flavor, both of which are generated by surface microorganisms. The objective of the present study was to investigate the microbial dynamics at the surface of Époisses cheese during ripening and postmanufacturing storage at low temperatures. Rind samples were analyzed by enumeration on agar plates and by 16S rRNA gene and internal transcribed spacer amplicon sequencing. During most of the ripening process, the counts of yeasts, which corresponded to the species Debaryomyces hansenii and Geotrichum candidum, were higher than those of the aerobic acid-sensitive bacteria. Debaryomyces hansenii reached a level of about 3 × 10⁸ cfu/cm², and its viability strongly decreased in the late stage of ripening and during storage at 4°C. Two of the inoculated bacterial species, Brevibacterium aurantiacum and Staphylococcus xylosus, did not establish themselves at the cheese surface. At the end of ripening, among the 18 most abundant bacterial species detected by amplicon sequencing, 14 were gram-negative, mainly from genera Psychrobacter, Vibrio, Halomonas, and Mesonia. It was hypothesized that the high moisture level of the Époisses rinds, due the humid atmosphere of the ripening rooms and to the frequent washings of the curds, favored growth of these gram-negative species. These species may be of interest for the development of efficient ripening cultures. In addition, because the orange color of Époisses cheeses could not be attributed to the growth of Brevibacterium, it would be interesting to investigate the type and origin of the pigments that confer color to this cheese.

Microbial Interactions within the Cheese Ecosystem and Their Application to Improve Quality and Safety

The cheese microbiota comprises a consortium of prokaryotic, eukaryotic and viral populations, among which lactic acid bacteria (LAB) are majority components with a prominent role during manufacturing and ripening. The assortment, numbers and proportions of LAB and other microbial biotypes making up the microbiota of cheese are affected by a range of biotic and abiotic factors. Cooperative and competitive interactions between distinct members of the microbiota may occur, with rheological, organoleptic and safety implications for ripened cheese. However, the mechanistic details of these interactions, and their functional consequences, are largely unknown. Acquiring such knowledge is important if we are to predict when fermentations will be successful and understand the causes of technological failures. The experimental use of "synthetic" microbial communities might help throw light on the dynamics of different cheese microbiota components and the interplay between them. Although synthetic communities cannot reproduce entirely the natural microbial diversity in cheese, they could help reveal basic principles governing the interactions between microbial types and perhaps allow multi-species microbial communities to be developed as functional starters. By occupying the whole ecosystem taxonomically and functionally, microbiota-based cultures might be expected to be more resilient and efficient than conventional starters in the development of unique sensorial properties.

Evaluating the Authenticity of the Raw-Milk Cheese Fontina (PDO) with Respect to Similar Cheeses

The implementation of quality assurance schemes for the assessment of PDO food authenticity is an issue involving manufacturers, traders, retailers and consumers. In this respect, reliable analytical methods are needed to integrate paper-trailing information. The feasibility of distinguishing the Italian Fontina PDO cheese from the generic Fontal cheese was preliminarily evaluated on a set of commercial samples by measuring selected parameters (pH, alkaline phosphatase activity, content of copper, volatiles, extent of proteolysis) related to the different manufacturing processes. The relative profile of free amino acids proved to be a promising tool. A new set of 41 samples of Fontina PDO cheese was collected at representative dairies within the recognized production area and analyzed for free amino acids. A chemometric model of Fontina PDO cheese was built based on the mean content and standard deviation of 15 free amino acids. On this basis, all of the PDO samples were correctly identified, whereas all of the Fontal cheeses were recognized as different cheeses.

Corynebacterium glutamicum Mechanosensing: From Osmoregulation to L-Glutamate Secretion for the Avian Microbiota-Gut-Brain Axis

After the discovery of Corynebacterium glutamicum from avian feces-contaminated soil, its enigmatic L-glutamate secretion by corynebacterial MscCG-type mechanosensitive channels has been utilized for industrial monosodium glutamate production. Bacterial mechanosensitive channels are activated directly by increased membrane tension upon hypoosmotic downshock; thus; the physiological significance of the corynebacterial L-glutamate secretion has been considered as adjusting turgor pressure by releasing cytoplasmic solutes. In this review, we present information that corynebacterial mechanosensitive channels have been evolutionally specialized as carriers to secrete L-glutamate into the surrounding environment in their habitats rather than osmotic safety valves. The lipid modulation activation of MscCG channels in L-glutamate production can be explained by the "Force-From-Lipids" and "Force-From-Tethers" mechanosensing paradigms and differs significantly from mechanical activation upon hypoosmotic shock. The review also provides information on the search for evidence that C. glutamicum was originally a gut bacterium in the avian host with the aim of understanding the physiological roles of corynebacterial mechanosensing. C. glutamicum is able to secrete L-glutamate by mechanosensitive channels in the gut microbiota and help the host brain function via the microbiota-gut-brain axis.

Austrian Raw-Milk Hard-Cheese Ripening Involves Successional Dynamics of Non-Inoculated Bacteria and Fungi

Cheese ripening involves successional changes of the rind microbial composition that harbors a key role on the quality and safety of the final products. In this study, we analyzed the evolution of the rind microbiota (bacteria and fungi) throughout the ripening of Austrian Vorarlberger Bergkäse (VB), an artisanal surface-ripened cheese, by using quantitative and qualitative approaches. The real-time quantitative PCR results revealed that bacteria were more abundant than fungi in VB rinds throughout ripening, although both kingdoms were abundant along the process. The qualitative investigation was performed by high-throughput gene-targeted (amplicon) sequencing. The results showed dynamic changes of the rind microbiota throughout ripening. In the fresh products, VB rinds were dominated by Staphylococcus equorum and Candida. At early ripening times (14–30 days) Psychrobacter and Debaryomyces flourished, although their high abundance was limited to these time points. At the latest ripening times (90–160 days), VB rinds were dominated by S. equorum, Brevibacterium, Corynebacterium, and Scopulariopsis. Strong correlations were shown for specific bacteria and fungi linked to specific ripening periods. This study deepens our understanding of VB ripening and highlights different bacteria and fungi associated to specific ripening periods which may influence the organoleptic properties of the final products.

Occurrence of Yeasts in White-Brined Cheeses: Methodologies for Identification, Spoilage Potential and Good Manufacturing Practices

Yeasts are generally recognized as contaminants in the production of white-brined cheeses, such as Feta and Feta-type cheeses. The most predominant yeasts species are Debaryomyces hansenii, Geotrichum candidum, Kluyveromyces marxianus, Kluyveromyces lactis, Rhodotorula mucilaginosa, and Trichosporon spp. Although their spoilage potential varies at both species and strain levels, yeasts will, in case of excessive growth, present a microbiological hazard, effecting cheese quality. To evaluate the hazard and trace routes of contamination, the exact taxonomic classification of yeasts is required. Today, identification of dairy yeasts is mainly based on DNA sequencing, various genotyping techniques, and, to some extent, advanced phenotypic identification technologies. Even though these technologies are state of the art at the scientific level, they are only hardly implemented at the industrial level. Quality defects, caused by yeasts in white-brined cheese, are mainly linked to enzymatic activities and metabolism of fermentable carbohydrates, leading to production of metabolites (CO2, fatty acids, volatile compounds, amino acids, sulfur compounds, etc.) and resulting in off-flavors, texture softening, discoloration, and swelling of cheese packages. The proliferation of spoilage yeast depends on maturation and storage conditions at each specific dairy, product characteristics, nutrients availability, and interactions with the co-existing microorganisms. To prevent and control yeast contamination, different strategies based on the principles of HACCP and Good Manufacturing Practice (GMP) have been introduced in white-brined cheese production. These strategies include milk pasteurization, refrigeration, hygienic sanitation, air filtration, as well as aseptic and modified atmosphere packaging. Though a lot of research has been dedicated to yeasts in dairy products, the role of yeast contaminants, specifically in white-brined cheeses, is still insufficiently understood. This review aims to summarize the current knowledge on the identification of contaminant yeasts in white-brined cheeses, their occurrence and spoilage potential related to different varieties of white-brined cheeses, their interactions with other microorganisms, as well as guidelines used by dairies to prevent cheese contamination.

The Effects of NaCl and Temperature on Growth and Survival of Yeast Strains Isolated from Danish Cheese Brines

Yeasts play an important role in cheese making, by contributing to microbial community establishment and improving flavor. This study aimed at investigating the impact of NaCl and temperature on growth and survival of 20 strains belonging to the yeast species Candida intermedia (2 strains), Debaryomyces hansenii (11), Kluyveromyces lactis (1), Papiliotrema flavescens (1), Rhodotorula glutinis (1), Sterigmatomyces halophilus (2) and Yamadazyma triangularis (2) isolated from Danish cheese brines. All yeasts could grow in Malt Yeast Glucose Peptone (MYGP) medium with low NaCl (≤ 4%, w/v) concentrations at 25 °C and 16 °C. Further, none of the strains, except for one strain of D. hansenii (KU-9), were able to grow under a condition mimicking cheese brine (MYGP with 23% (w/v) NaCl and 6.3 g/L lactate) at 25 °C, while all yeasts could grow at 16 °C, except for the two strains of C. intermedia. In the survival experiment, D. hansenii, S. halophilus and Y. triangularis survived in MYGP with 23% (w/v) NaCl throughout 13.5 days at 25 °C, with Y. triangularis and S. halophilus being the most NaCl tolerant, while the remaining yeasts survived for less than 7 days. These results enable the selection of relevant yeasts from cheese brines for potential use in the cheese industry.

Characterization of coagulase-negative staphylococci from brining baths in Germany

Brining is an important step in cheese making, and using brine baths for this purpose is common practice in German dairies. Time of brining, brine concentration, and composition of the complex and heterogeneous microbiota, including coagulase-negative staphylococci (CNS), contribute to the ripening and taste of cheese. As well as producing staphylococcal enterotoxins, some CNS show antibiotic resistance; therefore, we isolated 52 strains of presumptive CNS from cheese brines from 13 factories in Germany. Species identification by sodA gene sequencing revealed that 50 isolates were CNS: 31 Staphylococcus saprophyticus, 4 Staphylococcus carnosus, 4 Staphylococcus equorum, 3 Staphylococcus sciuri, 2 Staphylococcus hominis, and 2 Staphylococcus warneri. One isolate each was identified as Staphylococcus epidermidis, Staphylococcus pasteurii, Staphylococcus succinus, and Staphylococcus xylosus. Further subtyping of the Staph. saprophyticus isolates to the subspecies level revealed the presence of 6 Staph. saprophyticus ssp. saprophyticus. Using pulsed-field gel electrophoresis with the identified Staph. saprophyticus strains, 12 independent clones were identified, resulting in the exclusion of 18 strains from further testing. In 19 of the remaining 32 CNS isolates, resistance to antibiotics was observed. Resistance was found against oxacillin (17), penicillin (5), and cefoxitin (1). Four isolates expressed resistance to both oxacillin and penicillin. No resistance was found to enrofloxacin, tetracycline, gentamicin, or erythromycin. Then, PCR analysis for antibiotic resistance genes was performed for 22 different genes. Only genes blaZ and bla_TEM were found in 7 isolates. These isolates were selected for challenge tests with different concentrations of lactic acid and NaCl to examine whether expression of antibiotic resistance was influenced by these stressors. An increase in the minimal inhibitory concentration from 0 to 2.0 µg/mL was seen for trimethoprim/sulfamethoxazole only in one isolate of Staph. saprophyticus at an increased lactic acid concentration. Finally, all isolates were tested for genetic determinants (entA, entB, entC, entD, and entE) of the most common staphylococcal enterotoxins; none of these genes were detected. We found no indication for unacceptable risks originating from the isolated CNS.

Purification, Characterization and Thermodynamic Assessment of an Alkaline Protease by Geotrichum Candidum of Dairy Origin

Background

Alkaline proteases is the important group of enzymes having numerous industrial applications including dairy food formulations.

Objectives

The current study deals with the purification and characterization of an alkaline serine protease produced by Geotrichum candidum QAUGC01, isolated from indigenous fermented milk product, Dahi.

Material and Methods

In total twelve G. candidum strains were screened for their proteolytic activity by using standard protease assay. The protease production from G. candidum QAUGC01 was optimized by varying physio-chemical conditions. The protease was purified by using two-step method: ammonium sulfate precipitation and gel filtration chromatography. Protease was further characterized by studying various parameter like temperature, pH, modulators, metal ions and organic solvent. A thermodynamic study was also carried out to explore the half-life of protease.

Results

The G. candidum grew profusely at 25 °C and at an initial pH of 4.0 for 72 h of incubation producing 26.21 U/ml maximum extracellular protease. Protease revealed that V_max and K_m was 26.25 U.ml^-1.min^-1 and 0.05 mg.mL^-1, respectively using casein as substrate. The enzyme was stable at a temperature range (25-45 °C) and pH (8-9). Residual enzyme activity was strongly inhibited in the presence of PMSF (7.5%). The protease could hydrolyze proteinaceous substrates, casein (98%) and BSA (95%). The thermodynamic studies explored that the half-life of the enzyme that was 106.62 min, 38.72 min and 15.71 min at 50, 60 and 70 °C, respectively.

Conclusions

Purified protease from G. candidum GCQAU01 is an ideal candidate for industrial application.

Internal transcribed spacer (ITS) sequence-based characterization of fungal isolates from multiple yogurt facilities-A case study

Fungal spoilage remains a significant issue in dairy product quality, especially for cultured dairy products such as yogurt formulated without preservatives such as potassium sorbate. Fungal contamination can occur throughout the processing continuum, from the dairy farm environment to the finished product processing environment. As molecular characterization of fungal isolates is used more frequently, we obtained fungal isolates obtained in 2 yogurt processing facilities as part of routine fungal testing of raw materials (e.g., fruit preparations, added ingredients), in-process product samples, environmental samples (e.g., air plates, equipment surfaces such as valves, face plates, air nozzles), and finished product samples, to determine whether internal transcribed spacer (ITS) barcoding data would be helpful to support source tracking of fungal contamination issues. Internal transcribed spacer PCR amplification and sequencing allowed us to classify the 852 isolates from these 2 facilities into 200 unique ITS allelic types (AT), representing the phyla Ascomycota (743 isolates), Basidiomycota (97 isolates), and Mucoromycota (12 isolates). Thirty ITS AT were isolated from both facilities; 62 and 108 ITS AT were isolated from only facility A or only facility B, respectively. Nine ITS AT were each represented by more than 20 isolates; these AT comprised 53% of the 852 isolates. The considerable diversity of fungal isolates even within a single facility illustrates the challenge associated with controlling fungal contamination of dairy products. The ITS barcoding technique, however, did show promise for facilitating the source tracking of fungal contamination, particularly for ITS AT over-represented in a given facility. For example, we found evidence for equipment-specific reservoirs for 2 AT (14 and 219) in facility B. Our data suggest that despite its limited discriminatory power, ITS sequencing can provide initial information that can help trace fungal contamination along the processing continuum. However, development and implementation of discriminatory subtyping methods will be needed to further improve the ability to identify sources of fungal contamination in dairy facilities. Developing and implementing sampling plans that comprehensively capture yeast and mold diversity in a given processing facility remain a considerable challenge.

Cheese yeasts

Numerous traditionally aged cheeses are surface ripened and develop a biofilm, known as the cheese rind, on their surfaces. The rind of such cheeses comprises a complex community of bacterial and fungal species that are jointly responsible for the typical characteristics of the various cheese varieties. Surface ripening starts directly after brining with the rapid colonization of the cheese surface by yeasts. The initially dominant yeasts are acid and salt-tolerant and are capable of metabolizing the lactate produced by the starter lactic acid bacteria and of producing NH₃ from amino acids. Both processes cause the pH of the cheese surface to rise dramatically. This so-called deacidification process enables the establishment of a salt-tolerant, Gram-positive bacterial community that is less acid-tolerant. Over the past decade, knowledge of yeast diversity in cheeses has increased considerably. The yeast species with the highest prevalence on surface-ripened cheeses are Debaryomyces hansenii and Geotrichum candidum, but up to 30 species can be found. In the cheese core, only lactose-fermenting yeasts, such as Kluyveromyces marxianus, are expected to grow. Yeasts are recognized as having an indispensable impact on the development of cheese flavour and texture because of their deacidifying, proteolytic, and/or lipolytic activity. Yeasts are used not only in the production of surface-ripened cheeses but also as adjunct cultures in the vat milk in order to modify ripening behaviour and flavour of the cheese. However, yeasts may also be responsible for spoilage of cheese, causing early blowing, off-flavour, brown discolouration, and other visible alterations of cheese.

The role of the surface smear microbiome in the development of defective smear on surface-ripened red-smear cheese

The complex smear microbiota colonizing the surface of red-smear cheese fundamentally impacts the ripening process, appearance and shelf life of cheese. To decipher the prokaryotic composition of the cheese smear microbiome, the surface of a semi-hard surface ripened cheese was studied post-ripening by culture-based and culture-independent molecular approaches. The aim was to detect potential bacterial alterations in the composition of the cheese smear microbiota resulting from cheese storage in vacuum film-prepackaging, which is often accompanied by the development of a surface smear defect. Next-generation sequencing of amplified 16S rRNA gene fragments revealed an unexpected high diversity of a total of 132 different genera from the domains Bacteria and Archaea on the cheese surface. Beside typical smear organisms, our study revealed the presence of several microorganisms so far not associated with cheese, but related to milk, farm and cheese dairy environments. A 16S ribosomal RNA based analysis from total RNA identified the major metabolically active populations in the cheese surface smear as Actinobacteria of the genera Corynebacterium, Brevibacterium, Brachybacterium and Agrococcus. Comparison of data on a higher phylogenetic level revealed distinct differences in the composition of the cheese smear microbiome from the different samples. While the proportions of Proteobacteria and Bacteroidetes were increased in the smear of prepacked samples and in particular in defective smear, staphylococci showed an opposite trend and turned out to be strongly decreased in defective smear. In conclusion, next-generation sequencing of amplified 16S rRNA genes and 16S rRNA from total RNA extracts provided a much deeper insight into the bacterial composition of the cheese smear microbiota. The observed shifts in the microbial composition of samples from defect surface smear suggest that certain members of the Proteobacteria contribute to the observed negative organoleptic properties of the surface smear of cheese after prepacking in plastic foil.

Fermented Foods as a Dietary Source of Live Organisms

The popularity of fermented foods and beverages is due to their enhanced shelf-life, safety, functionality, sensory, and nutritional properties. The latter includes the presence of bioactive molecules, vitamins, and other constituents with increased availability due to the process of fermentation. Many fermented foods also contain live microorganisms that may improve gastrointestinal health and provide other health benefits, including lowering the risk of type two diabetes and cardiovascular diseases. The number of organisms in fermented foods can vary significantly, depending on how products were manufactured and processed, as well as conditions and duration of storage. In this review, we surveyed published studies in which lactic acid and other relevant bacteria were enumerated from the most commonly consumed fermented foods, including cultured dairy products, cheese, fermented sausage, fermented vegetables, soy-fermented foods, and fermented cereal products. Most of the reported data were based on retail food samples, rather than experimentally produced products made on a laboratory scale. Results indicated that many of these fermented foods contained 105-7 lactic acid bacteria per mL or gram, although there was considerable variation based on geographical region and sampling time. In general, cultured dairy products consistently contained higher levels, up to 109/mL or g. Although few specific recommendations and claim legislations for what constitutes a relevant dose exist, the findings from this survey revealed that many fermented foods are a good source of live lactic acid bacteria, including species that reportedly provide human health benefits.

Cheese brines from Danish dairies reveal a complex microbiota comprising several halotolerant bacteria and yeasts

The Danish Danbo cheese is a surface ripened semi-hard cheese, which before ripening is submerged in brine for up to 24 h. The brining is required in order to obtain the structural and organoleptic properties of the cheeses. Likewise, the content of NaCl in the cheese will influence especially the surface microbiota being of significant importance for flavour development and prevention of microbial spoilage. Even though the microbiota on cheese surfaces have been studied extensively, limited knowledge is available on the occurrence of microorganisms in cheese brine. The aim of the present study was to investigate by both culture-dependent and -independent techniques the brine microbiota in four Danish dairies producing Danbo cheese. The pH of the brines varied from 5.1 to 5.6 with a dry matter content from 20 to 27% (w/w). The content of lactate varied from 4.1 to 10.8 g/L and free amino acids from 65 to 224 mg/L. Bacteria were isolated on five different media with NaCl contents of 0.85-23.0% (w/v) NaCl. The highest count of 6.3 log CFU/mL was obtained on TSA added 4% (w/v) NaCl. For yeasts, the highest count was 3.7 log CFU/mL on MYGP added 8% (w/v) NaCl. A total of 31 bacterial and eight eukaryotic species were isolated including several halotolerant and/or halophilic species. Among bacteria, counts of ≥6.0 log CFU/mL were obtained for Tetragenococcus muriaticus and Psychrobacter celer, while counts between ≥4.5 and < 6.0 log CFU/mL were obtained for Lactococcus lactis, Staphylococcus equorum, Staphylococcus hominis, Chromohalobacter beijerinckii, Chromohalobacter japonicus and Microbacterium maritypicum. Among yeasts, counts of ≥3.5 log CFU/mL were only obtained for Debaryomyces hansenii. By amplicon-based high-throughput sequencing of 16S rRNA gene and ITS2 regions for bacteria and eukaryotes respectively, brines from the same dairy clustered together indicating the uniqueness of the dairy brine microbiota. To a great extent the results obtained by amplicon sequencing fitted with the culture-dependent technique though each of the two methodologies identified unique genera/species. Dairy brine handling procedures as e.g. microfiltration were found to influence the brine microbiota. The current study proves the occurrence of a specific dairy brine microbiota including several halotolerant and/or halophilic species most likely of sea salt origin. The importance of these species during especially the initial stages of cheese ripening and their influence on cheese quality and safety need to be investigated. Likewise, optimised brine handling procedures and microbial cultures are required to ensure an optimal brine microbiota.

Omics-Based Insights into Flavor Development and Microbial Succession within Surface-Ripened Cheese

In this study, a young Cheddar curd was used to produce two types of surface-ripened cheese, using two commercial smear-culture mixes of yeasts and bacteria. Whole-metagenome shotgun sequencing was used to screen the microbial population within the smear-culture mixes and on the cheese surface, with comparisons of microorganisms at both the species and the strain level. The use of two smear mixes resulted in the development of distinct microbiotas on the surfaces of the two test cheeses. In one case, most of the species inoculated on the cheese established themselves successfully on the surface during ripening, while in the other, some of the species inoculated were not detected during ripening and the most dominant bacterial species, Glutamicibacter arilaitensis, was not a constituent of the culture mix. Generally, yeast species, such as Debaryomyces hansenii and Geotrichum candidum, were dominant during the first stage of ripening but were overtaken by bacterial species, such as Brevibacterium linens and G. arilaitensis, in the later stages. Using correlation analysis, it was possible to associate individual microorganisms with volatile compounds detected by gas chromatography-mass spectrometry in the cheese surface. Specifically, D. hansenii correlated with the production of alcohols and carboxylic acids, G. arilaitensis with alcohols, carboxylic acids and ketones, and B. linens and G. candidum with sulfur compounds. In addition, metagenomic sequencing was used to analyze the metabolic potential of the microbial populations on the surfaces of the test cheeses, revealing a high relative abundance of metagenomic clusters associated with the modification of color, variation of pH, and flavor development. IMPORTANCE Fermented foods, in particular, surface-ripened cheese, represent a model to explain the metabolic interactions which regulate microbial succession in complex environments. This study explains the role of individual species in a heterogeneous microbial environment, i.e., the exterior of surface-ripened cheese. Through whole-metagenome shotgun sequencing, it was possible to investigate the metabolic potential of the resident microorganisms and show how variations in the microbial populations influence important aspects of cheese ripening, especially flavor development. Overall, in addition to providing fundamental insights, this research has considerable industrial relevance relating to the production of fermented food with specific qualities.

Autochthonous facility-specific microbiota dominates washed-rind Austrian hard cheese surfaces and its production environment

Cheese ripening involves the succession of complex microbial communities that are responsible for the organoleptic properties of the final products. The food processing environment can act as a source of natural microbial inoculation, especially in traditionally manufactured products. Austrian Vorarlberger Bergkäse (VB) is an artisanal washed-rind hard cheese produced in the western part of Austria without the addition of external ripening cultures. Here, the composition of the bacterial communities present on VB rinds and on different processing surfaces from two ripening cellars was assessed by near full length 16S rRNA gene amplification, cloning and sequencing. Non-inoculated aerobic bacteria dominated all surfaces in this study. VB production conditions (long ripening time, high salt concentration and low temperatures) favor the growth of psychro- and halotolerant bacteria. Several bacterial groups, such as coryneforms, Staphylococcus equorum and Halomonas dominated VB and were also found on most environmental surfaces. Analysis of OTUs shared between different surfaces suggests that VB rind bacteria are inoculated naturally during the ripening from the processing environment and that cheese surfaces exert selective pressure on these communities, as only those bacteria better adapted flourished on VB rinds. This study analyzed VB processing environment microbiota and its relationship with VB rinds for the first time, elucidating that the processing environment and the cheese microbiota should be considered as microbiologically linked ecosystems with the goal of better defining the events that take place during cheese maturation.

Diversity within Italian Cheesemaking Brine-Associated Bacterial Communities Evidenced by Massive Parallel 16S rRNA Gene Tag Sequencing

This study explored the bacterial diversity of brines used for cheesemaking in Italy, as well as their physicochemical characteristics. In this context, 19 brines used to salt soft, semi-hard, and hard Italian cheeses were collected in 14 commercial cheese plants and analyzed using a culture-independent amplicon sequencing approach in order to describe their bacterial microbiota. Large NaCl concentration variations were observed among the selected brines, with hard cheese brines exhibiting the highest values. Acidity values showed a great variability too, probably in relation to the brine use prior to sampling. Despite their high salt content, brine microbial loads ranged from 2.11 to 6.51 log CFU/mL for the total mesophilic count. Microbial community profiling assessed by 16S rRNA gene sequencing showed that these ecosystems were dominated by Firmicutes and Proteobacteria, followed by Actinobacteria and Bacteroidetes. Cheese type and brine salinity seem to be the main parameters accountable for brine microbial diversity. On the contrary, brine pH, acidity and protein concentration, correlated to cheese brine age, did not have any selective effect on the microbiota composition. Nine major genera were present in all analyzed brines, indicating that they might compose the core microbiome of cheese brines. Staphylococcus aureus was occasionally detected in brines using selective culture media. Interestingly, bacterial genera associated with a functional and technological use were frequently detected. Indeed Bifidobacteriaceae, which might be valuable probiotic candidates, and specific microbial genera such as Tetragenococcus, Corynebacterium and non-pathogenic Staphylococcus, which can contribute to sensorial properties of ripened cheeses, were widespread within brines.

Crystallization and demineralization phenomena in washed-rind cheese

This report documents an observational study of a high-moisture washed-rind cheese. Three batches of cheese were sampled on a weekly basis for 6 wk and again at wk 10. Center, under-rind, rind, and smear samples were tested for pH, moisture, and selected mineral elements. Powder x-ray diffractometry and petrographic microscopy were applied to identify and image the crystal phases. The pH of the rind increased by over 2 pH units by wk 10. The pH of the under-rind increased but remained below the rind pH, whereas the center pH decreased for most of aging and only began to rise after wk 5. Diffractograms of smear material revealed the presence of 4 crystal phases: brushite, calcite, ikaite, and struvite. The phases nucleated in succession over the course of aging, with calcite and ikaite appearing around the same time. A very small amount of brushite appeared sporadically in center and under-rind samples, but otherwise no other crystallization was observed beneath the rind. Micrographs revealed that crystals in the smear grew to over 250 μm in length by wk 10, and at least 2 different crystal phases, probably ikaite and struvite, could be differentiated by their different optical properties. The surface crystallization was accompanied by a mineral diffusion phenomenon that resulted, on average, in a 217, 95.7, and 149% increase in calcium, phosphorus, and magnesium, respectively, in the rind by wk 10. The diffusion phenomenon caused calcium, phosphorus, and magnesium to decrease, on average, by 55.0, 21.5, and 36.3%, respectively, in the center by wk 10. The present study represents the first observation of crystallization and demineralization phenomena in washed-rind cheese.

Biodiversity of the Surface Microbial Consortia from Limburger, Reblochon, Livarot, Tilsit, and Gubbeen Cheeses

Comprehensive collaborative studies from our laboratories reveal the extensive biodiversity of the microflora of the surfaces of smear-ripened cheeses. Two thousand five hundred ninety-seven strains of bacteria and 2,446 strains of yeasts from the surface of the smear-ripened cheeses Limburger, Reblochon, Livarot, Tilsit, and Gubbeen, isolated at three or four times during ripening, were identified; 55 species of bacteria and 30 species of yeast were found. The microfloras of the five cheeses showed many similarities but also many differences and interbatch variation. Very few of the commercial smear microorganisms, deliberately inoculated onto the cheese surface, were reisolated and then mainly from the initial stages of ripening, implying that smear cheese production units must have an adventitious "house" flora. Limburger cheese had the simplest microflora, containing two yeasts, Debaryomyces hansenii and Geotrichum candidum, and two bacteria, Arthrobacter arilaitensis and Brevibacterium aurantiacum. The microflora of Livarot was the most complicated, comprising 10 yeasts and 38 bacteria, including many gram-negative organisms. Reblochon also had a very diverse microflora containing 8 yeasts and 13 bacteria (excluding gram-negative organisms which were not identified), while Gubbeen had 7 yeasts and 18 bacteria and Tilsit had 5 yeasts and 9 bacteria. D. hansenii was by far the dominant yeast, followed in order by G. candidum, Candida catenulata, and Kluyveromyces lactis. B. aurantiacum was the dominant bacterium and was found in every batch of the 5 cheeses. The next most common bacteria, in order, were Staphylococcus saprophyticus, A. arilaitensis, Corynebacterium casei, Corynebacterium variabile, and Microbacterium gubbeenense. S. saprophyticus was mainly found in Gubbeen, and A. arilaitensis was found in all cheeses but not in every batch. C. casei was found in most batches of Reblochon, Livarot, Tilsit, and Gubbeen. C. variabile was found in all batches of Gubbeen and Reblochon but in only one batch of Tilsit and in no batch of Limburger or Livarot. Other bacteria were isolated in low numbers from each of the cheeses, suggesting that each of the 5 cheeses has a unique microflora. In Gubbeen cheese, several different strains of the dominant bacteria were present, as determined by pulsed-field gel electrophoresis, and many of the less common bacteria were present as single clones. The culture-independent method, denaturing gradient gel electrophoresis, resulted in identification of several bacteria which were not found by the culture-dependent (isolation and rep-PCR identification) method. It was thus a useful complementary technique to identify other bacteria in the cheeses. The gross composition, the rate of increase in pH, and the indices of proteolysis were different in most of the cheeses.

Microbial diversity and dynamics throughout manufacturing and ripening of surface ripened semi-hard Danish Danbo cheeses investigated by culture-independent techniques

Microbial successions on the surface and in the interior of surface ripened semi-hard Danish Danbo cheeses were investigated by culture-dependent and -independent techniques. Culture-independent detection of microorganisms was obtained by denaturing gradient gel electrophoresis (DGGE) and pyrosequencing, using amplicons of 16S and 26S rRNA genes for prokaryotes and eukaryotes, respectively. With minor exceptions, the results from the culture-independent analyses correlated to the culture-dependent plating results. Even though the predominant microorganisms detected with the two culture-independent techniques correlated, a higher number of genera were detected by pyrosequencing compared to DGGE. Additionally, minor parts of the microbiota, i.e. comprising <10.0% of the operational taxonomic units (OTUs), were detected by pyrosequencing, resulting in more detailed information on the microbial succession. As expected, microbial profiles of the surface and the interior of the cheeses diverged. During cheese production pyrosequencing determined Lactococcus as the dominating genus on cheese surfaces, representing on average 94.7%±2.1% of the OTUs. At day 6 Lactococcus spp. declined to 10.0% of the OTUs, whereas Staphylococcus spp. went from 0.0% during cheese production to 75.5% of the OTUs at smearing. During ripening, i.e. from 4 to 18 weeks, Corynebacterium was the dominant genus on the cheese surface (55.1%±9.8% of the OTUs), with Staphylococcus (17.9%±11.2% of the OTUs) and Brevibacterium (10.4%±8.3% of the OTUs) being the second and third most abundant genera. Other detected bacterial genera included Clostridiisalibacter (5.0%±4.0% of the OTUs), as well as Pseudoclavibacter, Alkalibacterium and Marinilactibacillus, which represented <2% of the OTUs. At smearing, yeast counts were low with Debaryomyces being the dominant genus accounting for 46.5% of the OTUs. During ripening the yeast counts increased significantly with Debaryomyces being the predominant genus, on average accounting for 96.7%±4.1% of the OTUs. The interior of the cheeses was dominated by Lactococcus spp. comprising on average 93.9%±7.8% of the OTUs throughout the cheese processing. The microbial dynamics described at genus level in this study add to a comprehensive understanding of the complex microbiota existing especially on surface ripened semi-hard cheeses.

Coexistence of Lactic Acid Bacteria and Potential Spoilage Microbiota in a Dairy Processing Environment

Microbial contamination in food processing plants can play a fundamental role in food quality and safety. In this study, the microbiota in a dairy plant was studied by both 16S rRNA- and 26S rRNA-based culture-independent high-throughput amplicon sequencing. Environmental samples from surfaces and tools were studied along with the different types of cheese produced in the same plant. The microbiota of environmental swabs was very complex, including more than 200 operational taxonomic units with extremely variable relative abundances (0.01 to 99%) depending on the species and sample. A core microbiota shared by 70% of the samples indicated a coexistence of lactic acid bacteria with a remarkable level of Streptococcus thermophilus and possible spoilage-associated bacteria, including Pseudomonas, Acinetobacter, and Psychrobacter, with a relative abundance above 50%. The most abundant yeasts were Kluyveromyces marxianus, Yamadazyma triangularis, Trichosporon faecale, and Debaryomyces hansenii. Beta-diversity analyses showed a clear separation of environmental and cheese samples based on both yeast and bacterial community structure. In addition, predicted metagenomes also indicated differential distribution of metabolic pathways between the two categories of samples. Cooccurrence and coexclusion pattern analyses indicated that the occurrence of potential spoilers was excluded by lactic acid bacteria. In addition, their persistence in the environment can be helpful to counter the development of potential spoilers that may contaminate the cheeses, with possible negative effects on their microbiological quality.