Characterization and emulsifying property of a novel bioemulsifier by Aeribacillus pallidus YM-1

Biodegradation of Naphthalene Using Biosurfactant Producing Fusarium proliferatum WC416 Isolated from Refinery Effluent

Naphthalene is one of the priority pollutants in the environment which can effectively managed through bioremediation approach. Here fungal remediation of PAHs may be cost-effective technology. In present research study, biodegradation of naphthalene at varying concentrations in laboratory scale was investigated using Fusarium proliferatum WC416 isolated from refinery effluent. Degradation of naphthalene was computed by high-performance liquid chromatography (HPLC) and gas chromatography -mass spectroscopy (GC-MS). The results show that Fusarium proliferatum WC416 has effectively degraded the naphthalene to salicylamide and salicylic acid. The highest degradation achieved was 83% for the concentration of 100 ppm followed 74% and 63% for the concentration of 250 ppm and 500 ppm respectively. The intermediates confirmed by GC-MS were salicylic acid (m/z identification 138) and salicylamide (m/z identification 137). During the study, fungal growth, COD, pH, and surface tension have been monitored, which show the continuous variation that indicates progressive biodegradation of naphthalene. The qualitative assessment of extracellular enzymes shows positive activity for lipase, manganese peroxidase, and laccase. The present study also assessed the biosurfactant production by fungus which was characterized as sophorolipid in nature. The study suggests that Fusarium proliferatum WC416 would be an efficient degrader of naphthalene for environmental clean-up.

Exploring Extremophiles from Bulgaria: Biodiversity, Biopolymer Synthesis, Functional Properties, Applications

Bulgaria stands out as a country rich in diverse extreme environments, boasting a remarkable abundance of mineral hot waters, which positions it as the second-largest source of such natural resources in Europe. Notably, several thermal and coastal solar salterns within its territory serve as thriving habitats for thermophilic and halophilic microorganisms, which offer promising bioactive compounds, including exopolysaccharides (EPSs). Multiple thermophilic EPS producers were isolated, along with a selection from several saltern environments, revealing an impressive taxonomic and bacterial diversity. Four isolates from three different thermophilic species, Geobacillus tepidamans V264, Aeribacillus pallidus 418, Brevibacillus thermoruber 423, and Brevibacillus thermoruber 438, along with the halophilic strain Chromohalobacter canadensis 28, emerged as promising candidates for further exploration. Optimization of cultivation media and conditions was conducted for each EPS producer. Additionally, investigations into the influence of aeration and stirring in laboratory bioreactors provided valuable insights into growth dynamics and polymer synthesis. The synthesized biopolymers showed excellent emulsifying properties, emulsion stability, and synergistic interaction with other hydrocolloids. Demonstrated biological activities and functional properties pave the way for potential future applications in diverse fields, with particular emphasis on cosmetics and medicine. The remarkable versatility and efficacy of biopolymers offer opportunities for innovation and development in different industrial sectors.

Algal amendment enhances biogenic methane production from coals of different thermal maturity

The addition of small amounts of algal biomass to stimulate methane production in coal seams is a promising low carbon renewable coalbed methane enhancement technique. However, little is known about how the addition of algal biomass amendment affects methane production from coals of different thermal maturity. Here, we show that biogenic methane can be produced from five coals ranging in rank from lignite to low-volatile bituminous using a coal-derived microbial consortium in batch microcosms with and without algal amendment. The addition of 0.1 g/l algal biomass resulted in maximum methane production rates up to 37 days earlier and decreased the time required to reach maximum methane production by 17–19 days when compared to unamended, analogous microcosms. Cumulative methane production and methane production rate were generally highest in low rank, subbituminous coals, but no clear association between increasing vitrinite reflectance and decreasing methane production could be determined. Microbial community analysis revealed that archaeal populations were correlated with methane production rate (p = 0.01), vitrinite reflectance (p = 0.03), percent volatile matter (p = 0.03), and fixed carbon (p = 0.02), all of which are related to coal rank and composition. Sequences indicative of the acetoclastic methanogenic genus Methanosaeta dominated low rank coal microcosms. Amended treatments that had increased methane production relative to unamended analogs had high relative abundances of the hydrogenotrophic methanogenic genus Methanobacterium and the bacterial family Pseudomonadaceae. These results suggest that algal amendment may shift coal-derived microbial communities towards coal-degrading bacteria and CO2-reducing methanogens. These results have broad implications for understanding subsurface carbon cycling in coal beds and the adoption of low carbon renewable microbially enhanced coalbed methane techniques across a diverse range of coal geology.

Biodegradation of asphaltenes by an indigenous bioemulsifier-producing Pseudomonas stutzeri YWX-1 from shale oil in the Ordos Basin: Biochemical characterization and complete genome analysis

Crude oil pollution is environmentally ubiquitous and has become a global public concern about its impact on human health. Asphaltenes are the key components of heavy crude oil (HCO) that are underutilized due to their high viscosity and density, and yet, the associated information about biodegradation is extremely limited in the literature. In the present study, an indigenous bacterium with effective asphaltene-degrading activity was isolated from oil shale and identified as Pseudomonas stutzeri by a polyphasic taxonomic approach, named YWX-1. Supplemented with 75 g L^-1 heavy crude oil as the sole carbon source for growth in basic mineral salts liquid medium (MSM), strain YWX-1 was able to remove 49% of asphaletene fractions within 14 days, when it was cultivated with an initial inoculation size of 1%. During the degradation process, the bioemulsifier produced by strain YWX-1 could emulsify HCO obviously into particles, as well as it had the ability to solubilize asphaletenes. The bioemulsifier was identified to be a mixture of polysaccharide and protein through Fourier transform infrared spectroscopy (FT-IR). The genome of strain YWX-1 contains one circular chromosome of 4488441 bp with 63.98% GC content and 4145 protein coding genes without any plasmid. Further genome annotation indicated that strain YWX-1 possesses a serial of genes involved in bio-emulsification and asphaltenes biodegradation. This work suggested that P. stutzeri YWX-1 could be a promising species for bioremediation of HCO and its genome analysis provided insight into the molecular basis of asphaltene biodegradation and bioemulsifier production.

Bacillales: From Taxonomy to Biotechnological and Industrial Perspectives

For a long time, the genus Bacillus has been known and considered among the most applicable genera in several fields. Recent taxonomical developments resulted in the identification of more species in Bacillus-related genera, particularly in the order Bacillales (earlier heterotypic synonym: Caryophanales), with potential application for biotechnological and industrial purposes such as biofuels, bioactive agents, biopolymers, and enzymes. Therefore, a thorough understanding of the taxonomy, growth requirements and physiology, genomics, and metabolic pathways in the highly diverse bacterial order, Bacillales, will facilitate a more robust designing and sustainable production of strain lines relevant to a circular economy. This paper is focused principally on less-known genera and their potential in the order Bacillales for promising applications in the industry and addresses the taxonomical complexities of this order. Moreover, it emphasizes the biotechnological usage of some engineered strains of the order Bacillales. The elucidation of novel taxa, their metabolic pathways, and growth conditions would make it possible to drive industrial processes toward an upgraded functionality based on the microbial nature.

Cytotoxicity of di-rhamnolipids produced by Pseudomonas aeruginosa RA5 against human cancerous cell lines

Rhamnolipid biosurfactant produced by Pseudomonas aeruginosa, possesses non-toxicity, environmental compatibility, a wide range of pH (4-8), temperature (4-100 °C), and salinity (1-10%) stability. The application of RLs is worldwide accepted in the pharmaceutical, medicinal, and food industries. It has been used for cytotoxicity efficacy analysis with a limited number of cancerous cell lines. To widen the scope of rhamnolipid application as an anticancer agent, we have studied Di-RLs homolog, 'Rha-Rha-C10-C10' produced by Pseudomonas aeruginosa RA5 against human cancerous cell lines including breast cancer (MCF-7), leukemia (K-562), cervical cancer (HeLa), Lung cancer (HOP-62), and colon cancer (HT-29) in a dose-dependent way. It was purified with silica gel chromatography followed by TLC and mass spectroscopy prior to cytotoxicity analysis. With a tensiometer, critical micelle concentration of Di-RLs was estimated to be 33.92 ± 2 mN/m at 0.2%. Cytotoxicity analysis of Di-RLs on K-562 cell line demonstrated inhibition with GI50 and TGI at < 10 µg/mL and 66.6 µg/mL, after 48 h of application. The morphology of human cancerous cell lines was observed under a laser confocal microscope with the SRB staining method. Further research is recommended to comprehend the Di-RLs as a potential anti-cancer agent.

Production, characterization and bio-emulsifying application of exopolysaccharides from Rhodotorula mucilaginosa YMM19

Microbial exopolysaccharides (EPS) are high molecular weight polymers having different sugar residues. EPS have potential applications in different fields, such as medicine, food and environment. Therefore, there is a growing interest in production, characterization and application of EPS from different microorganisms. The present study designed to investigate the production and characterization of EPS from Rhodotorula mucilaginosa YMM19 isolated from Morus nigra L. fruits as well as to examine their potential emulsifying properties. Effect of NaCl concentration, incubation period and pH on the production of EPS was studied. The maximum EPS production by yeast was achieved at 10% NaCl (9741.84 mg/l). The best incubation time for production of EPS was 5 days. Production of EPS decreased under neutral condition and increased at acidic and alkaline condition. The structural feature of EPS was examined by FT-IR and NMR spectral analysis and confirmed the presence of glucose, glucopyranose and galactose. The isolated EPS showed higher emulsification capacity with emulsification activity of 71% and emulsifying index of 60%. The EPS gave strong emulsification for farnesol and was more effective than sodium dodecyl sulphate, a reference emulsifier, in enhancing the herbicidal activity of farnesol against Melilotus indicus under greenhouse condition. The results suggest that the EPS produced by YMM19 strain has a potential to be used as emulsifying agent in pesticide formulations.

Production and potential biotechnological applications of microbial surfactants: An overview

Microbial surfactants are amphipathic molecules that consist of hydrophilic and hydrophobic domains, which allow partition of two fluid phases of varying degree of polarity. They are classified into two main groups: bioemulsifier and biosurfactant, depending on their molecular weight. Microbial surfactants occur in various categories according to their chemical nature and producing organisms. These biomolecules are produced by diverse groups of microorganisms including fungi, bacteria, and yeasts. Their production is significantly influenced by substrate type, fermentation technology and microbial strains. Owing to inherent multifunctional properties and assorted synthetic aptitude of the microbes, microbial surfactants are mostly preferred than their chemical counterparts for various industrial and biomedical applications including bioremediation, oil recovery; as supplements in laundry formulations and as emulsion-stabilizers in food and cosmetic industries as well as therapeutic agents in medicine. The present review discusses on production of microbial surfactants as promising and alternative broad-functional biomolecules for various biotechnological applications.

Esterification of Polymeric Carbohydrate Through Congener Cutinase-Like Biocatalyst

Cutinase-like enzymes (CLEs) are bi-functional hydrolases, which share the conserved catalytic site of lipase and consensus pentapeptide sequence of cutinase. Here, we have genetically replaced the canonical amino acids (CAA) by their non-canonical fluorinated surrogates to biosynthesize a novel class of congener biocatalyst for esterification of polymeric carbohydrate with long-chain fatty acid. It is a new enzyme-engineering approach used to manipulate industrially relevant biocatalyst through genetic incorporation of new functionally encoded non-canonical amino acids (NCAA). Global fluorination of CLE improved its catalytic, functional, and structural stability. Molecular docking studies confirmed that the fluorinated CLE (FCLE) had developed a binding affinity towards different fatty acids compared with the parent CLE. Importantly, FCLE could catalyze starch oleate synthesis in 24 h with a degree of substitution of 0.3 ± 0.001. Biophysical and microscopic analysis substantiated the efficient synthesis of the ester by FCLE. Our data represent the first step in the generation of an industrially relevant fluorous multifunctional enzyme for facile synthesis of high fatty acid starch esters.

Biodegradation of aliphatic and polycyclic aromatic hydrocarbons by the thermophilic bioemulsifier-producing Aeribacillus pallidus strain SL-1

The utilization of thermophilic hydrocarbon-degrading microorganisms is a suitable strategy for improving biodegradation of petroleum hydrocarbons and PAHs, as well as enhancing oil recovery from high-temperature reservoirs. In this study, the thermophilic strain Aeribacillus pallidus SL-1 was evaluated for the biodegradation of crude oil and PAHs at 60 °C. Strain SL-1 was found to preferentially degrade short-chain n-alkanes (<C17) and aromatic hydrocarbons from crude oil. The highest degradation rate of 84% was obtained with 1000 mg/l naphthalene as sole carbon source. Additionally, the strain was able to degrade 80% of phenanthrene (200 mg/l) and 50% of pyrene (50 mg/l) within 5 days at 60 °C. The SL-bioemulsifier produced by strain SL-1 was identified as a glycoprotein with stable emulsifying activity over a wide range of environmental conditions. Chemical composition studies exhibited that the SL-bioemulsifier consisted of polysaccharides (65.6%) and proteins (13.1%), among them, proteins were the major emulsifying functional substrates. Furthermore, the SL-bioemulsifier was able to enhance the solubility of PAHs. Thus, the bioemulsifier-producing strain SL-1 has great potential for applications in high-temperature bioremediation.

Biodegradation of mixed polycyclic aromatic hydrocarbons by pure and mixed cultures of biosurfactant producing thermophilic and thermo-tolerant bacteria

Applicability of thermophilic and thermo-tolerant microorganisms for biodegradation of polycyclic aromatic hydrocarbons (PAHs) with low water solubility is an interesting strategy for improving the biodegradation efficiency. In this study, we evaluated utility of thermophilic and thermo-tolerant bacteria isolated from Unkeshwar hot spring (India) for biodegradation of four different PAHs. Water samples were enriched in mineral salt medium (MSM) containing a mixture of four PAHs compounds (anthracene: ANT, fluorene: FLU, phenanthrene: PHE and pyrene: PYR) at 37 °C and 50 °C. After growth based screening, four potent strains obtained which were identified as Aeribacillus pallidus (UCPS2), Bacillus axarquiensis (UCPD1), Bacillus siamensis (GHP76) and Bacillus subtilis subsp. inaquosorum (U277) based on the 16S rRNA gene sequence analysis. Degradation of mixed PAH compounds was evaluated by pure as well as mixed cultures under shake flask conditions using MSM supplemented with 200 mg/L concentration of PAHs (50 mg/L of each compound) for 15 days at 37 °C and 50 °C. A relatively higher degradation of ANT (92%- 96%), FLU (83% - 86%), PHE (16% - 54%) and PYR (51% - 71%) was achieved at 50 °C by Aeribacillus sp. (UCPS2) and mixed culture. Furthermore, crude oil was used as a substrate to study the degradation of same PAHs using these organisms which also revealed with similar results with the higher degradation at 50 °C. Interestingly, PAH-degrading strains were also positive for biosurfactant production. Biosurfactants were identified as the variants of surfactins (lipopeptide biosurfactants) based on analytical tools and phylogenetic analysis of the surfactin genes. Overall, this study has shown that hot spring microbes may have a potential for PAHs degradation and also biosurfactant production at a higher temperature, which could provide a novel perspective for removal of PAHs residues from oil contaminated sites.

Occurrence of non-toxic bioemulsifiers during polyhydroxyalkanoate production by Pseudomonas strains valorizing crude glycerol by-product

While screening for polyhydroxyalkanoate (PHA) producing strains, using glycerol rich by-product as carbon source, it was observed that extracellular polymers were also secreted into the culture broth. The scope of this study was to characterize both intracellular and extracellular polymers, produced by Pseudomonas putida NRRL B-14875 and Pseudomonas chlororaphis DSM 50083, mostly focusing on those novel extracellular polymers. It was found that they fall into the class of bioemulsifiers (BE), as they showed excellent emulsion stability against different hydrocarbons/oils at various pH conditions, temperature and salinity concentrations. Cytotoxicity tests revealed that BE produced by P. chlororaphis inhibited the growth of highly pigmented human melanoma cells (MNT-1) by 50% at concentrations between 150 and 200 μg/mL, while no effect was observed on normal skin primary keratinocytes and melanocytes. This is the first study reporting mcl-PHA production by P. putida NRRL B-14785 and bioemulsifier production from both P. putida and P. chlororaphis strains.

Production and characterization of bioemulsifiers from Acinetobacter strains isolated from lipid-rich wastewater

In this study, two indigenous bacterial strains (Ab9-ES and Ab33-ES) isolated from lipid-rich wastewater showed potential to produce bioemulsifier in the presence of 2% (v/v) olive oil as a carbon source. These bacterial strains were identified as Acinetobacter sp. Ab9-ES and Acinetobacter sp. Ab33-ES by polymerase chain reaction and analysis of 16S rRNA gene sequences. Bioemulsifier production by these strains was found to be growth-linked. Maximum emulsifying activities (83.8% and 80.8%) were recorded from strains Ab9-ES and Ab33-ES, respectively. Bioemulsifier yields of 4.52 g/L and 4.31 g/L were obtained from strains Ab9-ES (XB9) and Ab33-ES (YB33), respectively. Fourier-transform infrared spectroscopic analysis revealed the glycoprotein nature of the bioemulsifiers. The bioemulsifiers formed stable emulsions only in the presence of edible oils. Maximum emulsifying activities of 79.6% (XB9) and 67.9% (YB33) were recorded in the presence of sunflower oil. The bioemulsifiers were found to be stable at a broad range of temperature (4-121 °C), moderate pH (5.0-10.0) and salinity (1-6%). In addition, bioemulsifier XB9 showed maximum emulsifying activities (77.3%, 74.5%, and 74.9%) at optimum temperature (50 °C), pH (7.0), and NaCl concentration (3%), respectively. On the contrary, YB33 demonstrated highest activities (73.6%, 72%, and 61.2%) at optimum conditions of 70 °C, pH 7.0, and NaCl concentration of 5%, respectively. Findings from this study suggest the potential biotechnological applications of the bioemulsifiers, especially in the remediation of oil-polluted sites.

Characterization of a novel bioemulsifier from Pseudomonas stutzeri

This study describes a novel and efficient alasan-like bioemulsifier produced by Pseudomonas stutzeri NJtech 11-1, which was isolated from the Shengli Oilfield. The strain was found to produce a new and interesting emulsion stabilizer. The crude bioemulsifier showed super stability with 50% salinity and broad pH 3-10. The emulsion index (EI₂₄) was increased to 100% after heating from 45 to 95 °C and the emulsion could be stable for at least 30 days. The yield of Ps-bioemulsifier (pure bioemulsifier) was 0.68 ± 0.05 mg mL^-1. The Ps-bioemulsifier was composed of carbohydrates (80 ± 2.6%) and proteins (9.5 ± 0.5%). A low concentration (0.2 mg mL^-1) of the Ps-bioemulsifier was obtained maximum emulsifying activity at pH 7.1 and its emulsifying activity strengthened by suitable salinity. Furthermore, Ps-bioemulsifier could also emulsify cyclohexane, hexadecane, kerosene, xylene hydrocarbons efficiently. Therefore, the Ps-bioemulsifier showed emulsifying characteristics which make it a good candidate for potential applications in bioremediation and microbial enhanced oil recovery.

Diversity and hydrocarbon-degrading potential of epiphytic microbial communities on Platanus x acerifolia leaves in an urban area

Plants and their associated bacteria have been suggested to play a role in air pollution mitigation, especially in urban areas. Particularly, epiphytic bacteria might be able to degrade atmospheric hydrocarbons. However, phyllospheric bacterial communities are highly variable depending on several factors, e.g. tree species, leaf age and physiology, environmental conditions. In this work, bacterial communities hosted by urban Platanus x acerifolia leaves were taxonomically characterized using high throughput sequencing of 16S rRNA gene, and their temporal and spatial variability was assessed by comparing samples collected from different locations in the city of Milan (Italy) and in different months. The diversity of alkane hydroxylase (alkB) phylotypes harboured by phyllospheric bacteria associated to urban Platanus trees was also evaluated. Results revealed that temporal changes, which are related to seasonality, acted as a stronger driver both on Platanus phyllospheric community structure and on alkB phylotype diversity than sampling location. Biodiversity of bacterial communities decreased along the growing season, leading to a strong dominance by the genus Stenotrophomonas. On the contrary, diversity of hydrocarbon-degrading populations increased over the months, although it resulted lower than that reported for other habitats. It was therefore hypothesized that atmospheric hydrocarbons might play a key role in the selection of phyllospheric populations in urban areas.

A novel bioemulsifier produced by Exiguobacterium sp. strain N4-1P isolated from petroleum hydrocarbon contaminated coastal sediment

In this study,ExiguobacteriumN4-1P is reported as a bioemulsifier producer for the first time.

A novel bioemulsifier from Geobacillus stearothermophilus A-2 and its potential application in microbial enhanced oil recovery

A novel glycoprotein emulsifier from the thermophilic, facultative anaerobic strain A-2 showing excellent, stable emulsifying properties and its potential application in MEOR.

Novel bioemulsifier produced by a Paenibacillus strain isolated from crude oil

BACKGROUND

Surface active compounds produced by microorganisms are attracting a pronounced interest due to their potential advantages over their synthetic counterparts, and to the fact that they could replace some of the synthetics in many environmental and industrial applications.

RESULTS

Bioemulsifier production by a Paenibacillus sp. strain isolated from crude oil was studied. The bioemulsifier was produced using sucrose with and without adding hydrocarbons (paraffin or crude oil) under aerobic and anaerobic conditions at 40°C. It formed stable emulsions with several hydrocarbons and its emulsifying ability was not affected by exposure to high salinities (up to 300 g/l), high temperatures (100°C-121°C) or a wide range of pH values (2-13). In addition, it presented low toxicity and high biodegradability when compared with chemical surfactants. A preliminary chemical characterization by Fourier Transform Infrared Spectroscopy (FT-IR), proton and carbon nuclear magnetic resonance (1H NMR and 13C CP-MAS NMR) and size exclusion chromatography indicated that the bioemulsifier is a low molecular weight oligosaccharide-lipid complex.

CONCLUSION

The production of a low molecular weight bioemulsifier by a novel Paenibacillus strain isolated from crude oil was reported. To the best of our knowledge, bioemulsifier production by Paenibacillus strains has not been previously reported. The features of this novel bioemulsifier make it an interesting biotechnological product for many environmental and industrial applications. Graphical Abstract Novel bioemulsifier from Paenibacillus sp.

Isolation and characterization of dissolved organic matter fractions from antialgal products of Microcystis aeruginosa

An antialgal bacterium, Streptomyces sp. HJC-D1, was applied for the biodegradation of cyanobacterium Microcystis aeruginosa, and the isolation and characterization of dissolved organic matter (DOM) fractions in antialgal products were studied. Results showed the the growth of M. aeruginosa was significantly inhibited by the cell-free filtrate of Streptomyces sp. HJC-D1 with the growth inhibition of 86 ± 7 %. The antialgal products were divided using resin adsorbents into the hydrophilic fraction (HPI), hydrophobic acid (HPO-A), transphilic acid (TPI-A), hydrophobic neutral and transphilic neutral, and then the five fractions were analyzed by the 3-D fluorescence spectroscopy, gel permeation chromatography, and Fourier transform infrared spectroscopy. The results indicated that the HPI component was the most abundant DOM fraction in the antialgal products, and its concentration was increased with the increase of cell-free filtrate concentration. The fluorescence peak location and intensity analysis showed that the protein-, fulvic-, and humic-like substances were dominant in the HPI, HPO-A, and TPI-A fractions, and intensities of the relevant fluorescence peaks were stronger in the experimental groups than those of the control groups. It was also found that the number-average molecular weight of DOM fractions ranged from 245 to 1,452 g mol(-1), and thereinto organic acids such as HPO-A and TPI-A exhibited lower molecular weights.

Contributions of biosurfactants to natural or induced bioremediation

The number of studies dedicated to evaluating the influence of biosurfactants on bioremediation efficiency is constantly growing. Although significant progress regarding the explanation of mechanisms behind biosurfactant-induced effects could be observed, there are still many factors which are not sufficiently elucidated. This corresponds to the fact that although positive influence of biosurfactants is often reported, there are also numerous cases where no or negative effect was observed. This review summarizes the recent finding in the field of biosurfactant-amended bioremediation, focusing mainly on a critical approach towards potential limitations and causes of failure while investigating the effects of biosurfactants on the efficiency of biodegradation and phytoextraction processes. It also provides a summary of successive steps, which should be taken into consideration when designing biosurfactant-related treatment processes.