AMINOPLASTIC STANDARDS FOR ELECTRON PROBE X-RAY MICROANALYSIS (EPXMA) OF ULTRATHIN FROZEN-DRIED CRYOSECTIONS

Evaluation of several common standards for the X-ray microanalysis of thin biological specimens

The question of the best type of standard to use for X-ray microanalysis of thin biological specimens remains unanswered. Standards embedded in an organic matrix have the advantage that they resemble biological specimens, but their composition is generally not known exactly. We compared several standards and, surprisingly, inorganic binary salts sprayed onto a supporting film were the most suitable: they corresponded closely with several other methods using organic matrices; they were easily produced; and their composition is known. Glutaraldehyde-urea aminoplastic resin thin sections and thin films containing dissolved salts were problematic. The composition of the polymer appears to be variable, and the thin films did not correspond with any other standard tested. Chelex100 bio-standard beads and flakes loaded with accurately determined concentrations of ions, embedded in epoxy resin and thin sectioned, tended to correspond to the results obtained with the binary salts. However, the results from some bio-standards were inexplicably aberrant. An epoxy resin standard was used for bromine, and was found to agree closely with the binary standards.

Standards for the application of X-ray microanalysis to biological specimens

A review on the subject of compounds used as standards for biological X-ray microanalysis is presented. The general approach used for standardization has been to use standards which resemble the specimen closely in composition. Thus, standards based on proteins have been used for analysis of quench-frozen cryosectioned specimens, whereas standards based on embedding resins have been used for resin-embedded material. The properties of, and problems associated with, each type of standard are recognized and have been well documented. The choice and analysis of biological material. Attention is drawn to the fact that the problems associated with any quantification procedure need to be kept in mind when analysis of standards is undertaken.

Quantitative X-ray microanalysis of biological specimens

Qualitative X-ray microanalysis of biological specimens requires an approach that is somewhat different from that used in the materials sciences. The first step is deconvolution and background subtraction on the obtained spectrum. The further treatment depends on the type of specimen: thin, thick, or semithick. For thin sections, the continuum method of quantitation is most often used, but it should be combined with an accurate correction for extraneous background. However, alternative methods to determine local mass should also be considered. In the analysis of biological bulk specimens, the ZAF-correction method appears to be less useful, primarily because of the uneven surface of biological specimens. The peak-to-local background model may be a more adequate method for thick specimens that are not mounted on a thick substrate. Quantitative X-ray microanalysis of biological specimens generally requires the use of standards that preferably should resemble the specimen in chemical and physical properties. Special problems in biological microanalysis include low count rates, specimen instability and mass loss, extraneous contributions to the spectrum, and preparative artifacts affecting quantitation. A relatively recent development in X-ray microanalysis of biological specimens is the quantitative determination of local water content.

Frontiers in electron probe microanalysis: application to cell physiology

The application of electron probe microanalysis techniques, using X-ray and electron energy loss instruments, to problems in cell physiology is reviewed. The details of the special methodological requirements for the analysis of cryosections at high spatial resolution in an analytical electron microscope are discussed together with a comprehensive review of data obtained on major organ systems and cell types.

Quantitative energy dispersive X-ray microanalysis of eight elements in pancreatic endocrine and exocrine cells after cryo-fixation

Quantitative X-ray microanalysis of 8 elements was performed on ultrathin, freeze-dried sections of islets and pancreas pieces from non-inbred ob/ob-mice. Diffusion of elements was reduced to a minimum by rapidly freezing the tissue samples between nitrogen-cooled polished copper surfaces and avoiding the use of chemical fixatives and stains. The ultrastructural morphology was adequately maintained to allow measurements on secretory granules, mitochondria, cell nuclei, and cytoplasm free of these organelles. The distribution of the various elements between cellular compartments was similar in islet beta-cells and exocrine pancreas cells. However, the insulin secretory granules were outstanding in exhibiting the highest concentrations of zinc and calcium. In comparison with cytoplasm in the beta-cells, the insulin granules accumulated calcium 2-fold and zinc as much as 40-fold. As no correlation could be made for endoplasmic reticulum in the cytoplasmic measurements areas, the true accumulations above cytosol are likely to be even higher.