The use of rhodamine 6G and fluorescence microscopy in the evaluation of phospholipid-based polymeric biomaterials

Surface-segregating zwitterionic copolymers to control poly(dimethylsiloxane) surface chemistry

The use of microfluidic devices in biomedicine is growing rapidly in applications such as organs-on-chip and separations. Polydimethylsiloxane (PDMS) is the most popular material for microfluidics due to its ability to replicate features down to the nanoscale, flexibility, gas permeability, and low cost. However, the inherent hydrophobicity of PDMS leads to the adsorption of macromolecules and small molecules on device surfaces. This curtails its use in "organs-on-chip" and other applications. Current technologies to improve PDMS surface hydrophilicity and fouling resistance involve added processing steps or do not create surfaces that remain hydrophilic for long periods. This work describes a novel, simple, fast, and scalable method for improving surface hydrophilicity and preventing the nonspecific adsorption of proteins and small molecules on PDMS through the use of a surface-segregating zwitterionic copolymer as an additive that is blended in during manufacture. These highly branched copolymers spontaneously segregate to surfaces and rearrange in contact with aqueous solutions to resist nonspecific adsorption. We report that mixing a minute amount (0.025 wt%) of the zwitterionic copolymer in PDMS considerably reduces hydrophobicity and nonspecific adsorption of proteins (albumin and lysozyme) and small molecules (vitamin B12 and reactive red). PDMS blended with these zwitterionic copolymers retains its mechanical and physical properties for at least six months. Moreover, this approach is fully compatible with existing PDMS device manufacture protocols without additional processing steps and thus provides a low-cost and user-friendly approach to fabricating reliable biomicrofluidics.

Complementary Supramolecular Functionalization Enhances Antifouling Surfaces: A Ureidopyrimidinone-Functionalized Phosphorylcholine Polymer

Fibrosis of implants remains a significant challenge in the use of biomedical devices and tissue engineering materials. Antifouling coatings, including synthetic zwitterionic coatings, have been developed to prevent fouling and cell adhesion to several implantable biomaterials. While many of these coatings need covalent attachment, a conceptually simpler approach is to use a spontaneous self-assembly event to anchor the coating to a surface. This could simplify material processing through highly specific molecular recognition. Herein, we investigate the ability to utilize directional supramolecular interactions to anchor an antifouling coating to a polymer surface containing a complementary supramolecular unit. A library of controlled copolymerization of ureidopyrimidinone methacrylate (UPyMA) and 2-methacryloyloxyethyl phosphorylcholine (MPC) was prepared and their UPy composition was assessed. The MPC-UPy copolymers were characterized by 1H NMR, Fourier transform infrared (FTIR), and gel permeation chromatography (GPC) and found to exhibit similar mol % of UPy as compared to feed ratios and low dispersities. The copolymers were then coated on an UPy elastomer and the surfaces were assessed for hydrophilicity, protein absorption, and cell adhesion. By challenging the coatings, we found that the antifouling properties of the MPC-UPy copolymers with more UPy mol % lasted longer than the MPC homopolymer or low UPy mol % copolymers. As a result, the bioantifouling nature could be tuned to exhibit spatio-temporal control, namely, the longevity of a coating increased with UPy composition. In addition, these coatings showed nontoxicity and biocompatibility, indicating their potential use in biomaterials as antifouling coatings. Surface modification employing supramolecular interactions provided an approach that merges the simplicity and scalability of nonspecific coating methodology with the specific anchoring capacity found when using conventional covalent grafting with longevity that could be engineered by the supramolecular composition itself.

A Study of the Phosphorylcholine Polymer Coating of a Polymethylpentene Hollow Fiber Membrane

A phosphorylcholine polymer (poly(MPC-co-BMA-co-TSMA), PMBT) was prepared by free radical polymerization and coated on the surface of the polymethylpentene hollow fiber membrane (PMP-HFM). ATR-FTIR and SEM analyses showed that the PMBT polymer containing phosphorylcholine groups was uniformly coated on the surface of the PMP-HFM. Thermogravimetric analysis showed that the PMBT had the best stability when the molar percentage of MPC monomer in the polymer was 35%. The swelling test and static contact angle test indicated that the coating had excellent hydrophilic properties. The fluorescence test results showed that the coating could resist dissolution with 90% (v/v%) ethanol solution and 1% (w/v%) SDS solution. The PMBT coating was shown to be able to decrease platelet adherence to the surface of the hollow fiber membrane, and lower the risk of blood clotting; it had good blood compatibility in tests of whole blood contact and platelet adhesion. These results show that the PMBT polymer may be coated on the surface of the PMP-HFM, and is helpful for improving the blood compatibility of membrane oxygenation.

Biomimetic materials based on zwitterionic polymers toward human-friendly medical devices

This review summarizes recent research on the design of polymer material systems based on biomimetic concepts and reports on the medical devices that implement these systems. Biomolecules such as proteins, nucleic acids, and phospholipids, present in living organisms, play important roles in biological activities. These molecules are characterized by heterogenic nature with hydrophilicity and hydrophobicity, and a balance of positive and negative charges, which provide unique reaction fields, interfaces, and functionality. Incorporating these molecules into artificial systems is expected to advance material science considerably. This approach to material design is exceptionally practical for medical devices that are in contact with living organisms. Here, it is focused on zwitterionic polymers with intramolecularly balanced charges and introduce examples of their applications in medical devices. Their unique properties make these polymers potential surface modification materials to enhance the performance and safety of conventional medical devices. This review discusses these devices; moreover, new surface technologies have been summarized for developing human-friendly medical devices using zwitterionic polymers in the cardiovascular, cerebrovascular, orthopedic, and ophthalmology fields.

Effects of molecular architecture of photoreactive phospholipid polymer on adsorption and reaction on substrate surface under aqueous condition

Water-soluble photoreactive polymers with both phosphorylcholine and benzophenone groups were synthesized for the reaction between the polymers and the substrate in aqueous medium. To control the polymer architecture, the living radical polymerization method was applied to the copolymerization of 2-methacryloyloxyethyl phosphorylcholine and benzophenone methacrylates. These polymers possess various architectures, such as linear polymers, polymers with hydrophobic terminals, and 4-armed star-like polymers, that could promote their adsorption on the substrate surfaces. Additionally, two types of benzophenone groups were examined. Due to the bulky phosphorylcholine group, tetra(ethylene oxide) group as a spacer between polymer main chain and benzophenone group was considered. These polymers could adsorb on the surface in an aqueous medium, followed by reaction on the surface via photoirradiation depending on the chemical structure of the benzophenone group. The thickness of the polymer layer depended on the polymer architecture, i.e. a polymer with a hydrophobic terminal could form a thick layer. After modification, the contact angle by air in the aqueous medium decreased, compared to that on the base substrate. This was due to the hydrophilic nature based on the phosphorylcholine groups at the surface. The amount of proteins adsorbed on the surface also decreased because of the surface modification. These findings indicated that these water-soluble photoreactive polymers could be applied for the safer and effective surface modification of substrates via conventional photoirradiation without using an organic solvent.

2-Methacryloyloxyethyl Phosphorylcholine Polymer Coating Inhibits Bacterial Adhesion and Biofilm Formation on a Suture: An In Vitro and In Vivo Study

Initial bacterial adhesion to medical devices and subsequent biofilm formation are known as the leading causes of surgical site infection (SSI). Therefore, inhibition of bacterial adhesion and biofilm formation on the surface of medical devices can reduce the risk of SSIs. In this study, a highly hydrophilic, antibiofouling surface was prepared by coating the bioabsorbable suture surface with poly(2-methacryloyloxyethyl phosphorylcholine (MPC)-co-n-butyl methacrylate) (PMB). The PMB-coated and noncoated sutures exhibited similar mechanical strength and surface morphology. The effectiveness of the PMB coating on the suture to suppress adhesion and biofilm formation of methicillin-resistant Staphylococcus aureus and methicillin-susceptible Staphylococcus aureus was investigated both in vitro and in vivo. The bacterial adhesion test revealed that PMB coating significantly reduced the number of adherent bacteria, with no difference in the number of planktonic bacteria. Moreover, fluorescence microscopy and scanning electron microscopy observations of adherent bacteria on the suture surface after contact with bacterial suspension confirmed PMB coating-mediated inhibition of biofilm formation. Additionally, we found that the PMB-coated sutures exhibited significant antibiofouling effects in vivo. In conclusion, PMB-coated sutures demonstrated bacteriostatic effects associated with a highly hydrophilic, antibiofouling surface and inhibited bacterial adhesion and biofilm formation. Therefore, PMB-coated sutures could be a new alternative to reduce the risk of SSIs.

Formation of Hydrophobic Domains on the poly(MPC-co-Dodecyl Methacrylate)-Coated Surface Recognized by Macrophage-like Cells

Copolymers comprising 2-methacryloyloxyethyl phosphorylcholine (MPC) and hydrophobic methacrylic esters were used as biomembrane-mimetic polymers to provide blood compatibility. In the present study, we compared the surfaces coated with two MPC polymers with different alkyl groups, namely, poly(MPC-co-butyl methacrylate) (PMB) and poly(MPC-co-dodecyl methacrylate) (PMD), to clarify the effect of their hydrophobic units. Various substrates, such as poly(ethylene terephthalate), polycarbonate, polypropylene, acrylonitrile-butadiene-styrene copolymer, and stainless steel, were coated with ethanol solutions containing various concentrations of PMD or PMB. The solubility of PMD in ethanol changed depending on the water content. Scanning probe microscopy and rhodamine 6G staining revealed heterogeneous microstructures on the PMD-coated surface but not on the PMB-coated surface. Adhesion of various cells was efficiently suppressed by the PMD coating at lower concentration than the PMB coating, except regarding the adhesion of macrophage-like RAW264.7 cells. Our results suggest that the dodecyl groups in PMD increased its affinity for the substrates and simultaneously induced the formation of hydrophobic domains recognized by RAW264.7 cells.

Fluorescence imaging of stained red blood cells with simultaneous resonance Raman photostability analysis

Simultaneous fluorescence and resonance Raman imaging of R6G-stained red blood cells with optimal laser power.

Plasmonic Nanoparticles Driven Enhanced Light Amplification in a Local 2D and 3D Self-Assembly

We present fluorescence and a random lasing enhancement effect due to the interaction between gold nanoparticles (AuNPs) and Rhodamine 6G (Rh6G) dye. Non-covalently bounded dyes in the proximity of nanoparticles are studied in three systems of varying dimensionality: from (i) three-dimensional freely distributed suspensions, through (ii) quasi-two-dimensional multilamellar liposomes, to (iii) solid two-dimensional thin layers. Liposomes facilitate the formation of stable AuNPs/Rh6G composition showing enhanced fluorescence, while solid thin films exhibit plasmon-assisted random lasing.

Monodisperse manganese oxide nanoparticles: Synthesis, characterization, and chemical reactivity

Highly monodisperse amorphous manganese oxide (MnO_x) nanospheres with diameter of ca. 300nm have been obtained from ammonia aqueous solution of KMnO₄ at room temperature. The amorphous MnO_x nanospheres successfully converted to monodisperse K-OMS-2 (cryptomelane) and K-OMS-2/Mn₂O₃ nanoraspberries through calcination process at 600 and 800°C, respectively. Analyzing the structure of such amorphous MnO_x has been a challenge because fewer reports are available to examine amorphous structure. Thus, shape, crystallinity, and structure of the amorphous and crystalline MnO_x nanostructures were characterized in detail by X-ray diffraction (XRD), thermogravimetry/differential thermal analysis (TG/DTA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution TEM (HRTEM), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray Photoelectron Spectroscopy (XPS), and energy dispersive spectroscopy (EDS). We discussed a plausible formation mechanism of amorphous MnO_x nanospheres based on the investigations. The obtained MnO_x nanostructures have been demonstrated to possess oxidative degradation ability of Rhodamine B (RhB) under acidic aqueous condition without any additives such as chemical oxidizing agents and UV and/or visible light irradiation. RhB degradation rate of amorphous MnO_x nanospheres was about one hundred times faster than that of K-OMS-2 nanoraspberries.

Antifouling Stripes Prepared from Clickable Zwitterionic Copolymers

In this study, we have fabricated robust patterned surfaces that contain biocompatible and antifouling stripes, which cause microorganisms to consolidate into bare silicon spaces. Copolymers of methacryloyloxyethyl phosphorylcholine (MPC) and a methacrylate-substituted dihydrolipoic acid (DHLA) were spin-coated onto silicon substrates. The MPC units contributed biocompatibility and antifouling properties, and the DHLA units enabled cross-linking and the formation of robust thin films. Photolithography enabled the formation of 200-μm-wide poly(MPC-DHLA) stripped patterns that were characterized using atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and rhodamine 6G staining. Regardless of the spacing between poly(MPC-DHLA) stripes (10, 50, or 100 μm), Escherichia coli rapidly adhered to the bare silicon gaps that lacked the copolymer, confirming the antifouling nature of MPC. Overall, this work provides a surface modification strategy for generating alternating biofouling and nonfouling surface structures that are potentially applicable for researchers studying cell biology, drug screening, and biosensor technology.

Poly(dimethylsiloxane) (PDMS) surface patterning by biocompatible photo-crosslinking block copolymers

Poly(dimethylsiloxane) (PDMS) surface was patterned by poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC)-containing photo-crosslinking diblock copolymers upon photo-irradiation.

Cell membrane-mimicking coating for blood-contacting polyurethanes

The aim of the present work was to develop simple modification technique for polyurethanes (PUs) intended for use in blood-contacting implants (vascular grafts, heart prosthesis, ventricular assist devices). PU surface was modified with soybean-derived phosphatidylcholine (PC) via one-step dip coating technique. In order to evaluate blood compatibility of the obtained materials, samples were contacted with human blood under static and arterial flow-simulated conditions. The PC-modified surfaces were thoroughly characterized and tested for fibrinogen resistance, the ability to resist platelet adhesion and activation, hemolysis percentage and plasma recalcification time. Results demonstrated significant, more than three-fold reduction in the amount of fibrinogen adsorbed to PC-modified materials as compared to non-modified PU. Analysis of the samples’ surface after incubation with blood showed high reduction in platelet adhesion. The results were confirmed by analysis of blood samples collected after shear-stress tests – the percentage of free (non-aggregated) platelets remaining in blood samples contacted with PC-coated materials exceeded 70%. The same parameter measured for non-modified PU was significantly lower and equaled 28%.

Non-aggregated protamine-coated poly(lactide-co-glycolide) nanoparticles of cisplatin crossed blood-brain barrier, enhanced drug delivery and improved therapeutic index in glioblastoma cells: in vitro studies

BACKGROUND AND OBJECTIVES

Non-aggregated protamine impregnated poly(lactide-co-glycolide) nanoparticles of cisplatin (Pt-PLGA NPs) were synthesized to augment brain delivery.

METHODS AND RESULTS

The mean particle size of Pt-PLGA NPs and PLGA NPs were observed to be 173.2 ± 7.9 nm and 140 ± 10.2 nm, respectively. The Pt-PLGA NPs significantly (p < 0.05, one-way analysis of variance; ANOVA) delivered higher amount (172.41 ± 15.04 μg) of cisplatin in comparison to 110.48 ± 4.71 μg by PLGA NPs and 20.83 ± 1.65 μg by cisplatin solution across in vitro bovine brain microvessel endothelial cells. Cisplatin bearing Pt-PLGA NPs was found to be highly cytotoxic to U87 glioblastoma cells with an IC50 of 2.1 μM as compared (one-way ANOVA, p < 0.05) to PLGA NPs (3.9 μM) and cisplatin alone (13.33 μM). Impregnation with Pt enhanced the uptake of PLGA NPs in U87 glioblastoma cells as compared to PLGA NPs by following endocytosis mechanism.

CONCLUSION

Cisplatin-loaded Pt-PLGA NPs compel preclinical tumour regression study to further improve its utility against glioblastoma.

Evaluation of the durability and antiadhesive action of 2-methacryloyloxyethyl phosphorylcholine grafting on an acrylic resin denture base material

STATEMENT OF PROBLEM

The polymer 2-methacryloyloxyethyl phosphorylcholine is currently used on medical devices to prevent infection. Denture plaque-associated infection is regarded as a source of serious dental and medical complications in the elderly population, and denture hygiene, therefore, is an issue of considerable importance for denture wearers. Furthermore, because denture bases are exposed to mechanical stresses, for example, denture brushing, the durability of the coating is important for retaining the antiadhesive function of 2-methacryloyloxyethyl phosphorylcholine.

PURPOSE

The purpose of this study is to investigate the durability and antiadhesive activity of two 2-methacryloyloxyethyl phosphorylcholine polymer coating techniques: poly-2-methacryloyloxyethyl phosphorylcholine grafting and poly-2-methacryloyloxyethyl phosphorylcholine-co-n-butyl methacrylate coating. It was revealed that 2-methacryloyloxyethyl phosphorylcholine polymer coating of the denture base resin polymethyl methacrylate decreases bacterial biofilm formation.

MATERIAL AND METHODS

Durability was examined by rhodamine staining and elemental surface analysis and by determining the wetting properties of the 2-methacryloyloxyethyl phosphorylcholine polymer-modified polymethyl methacrylate after a friction test that comprised 500 brushing cycles. Antiadhesive activity was examined by using a Streptococcus mutans biofilm formation assay.

RESULTS

Poly-2-methacryloyloxyethyl phosphorylcholine-grafted polymethyl methacrylate retained 2-methacryloyloxyethyl phosphorylcholine units and antiadhesive activity even after repetitive mechanical stress, whereas co-n-butyl methacrylate-coated polymethyl methacrylate did not.

CONCLUSION

These results demonstrated that graft polymerization of 2-methacryloyloxyethyl phosphorylcholine on denture surfaces may contribute to the durability of the coating and prevent microbial retention.

Simple surface modification of a titanium alloy with silanated zwitterionic phosphorylcholine or sulfobetaine modifiers to reduce thrombogenicity

Thrombosis and thromboembolism remain problematic for a large number of blood contacting medical devices and limit broader application of some technologies due to this surface bioincompatibility. In this study we focused on the covalent attachment of zwitterionic phosphorylcholine (PC) or sulfobetaine (SB) moieties onto a TiAl(6)V(4) surface with a single step modification method to obtain a stable blood compatible interface. Silanated PC or SB modifiers (PCSi or SBSi) which contain an alkoxy silane group and either PC or SB groups were prepared respectively from trimethoxysilane and 2-methacryloyloxyethyl phosphorylcholine (MPC) or N-(3-sulfopropyl)-N-(methacryloxyethyl)-N,N-dimethylammonium betaine (SMDAB) monomers by a hydrosilylation reaction. A cleaned and oxidized TiAl(6)V(4) surface was then modified with the PCSi or SBSi modifiers by a simple surface silanization reaction. The surface was assessed with X-ray photoelectron spectroscopy (XPS), attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) and contact angle goniometry. Platelet deposition and bulk phase activation were evaluated following contact with anticoagulated ovine blood. XPS results verified successful modification of the PCSi or SBSi modifiers onto TiAl(6)V(4) based on increases in surface phosphorous or sulfur respectively. Surface contact angles in water decreased with the addition of hydrophilic PC or SB moieties. Both the PCSi and SBSi modified TiAl(6)V(4) surfaces showed decreased platelet deposition and bulk phase platelet activation compared to unmodified TiAl(6)V(4) and control surfaces. This single step modification with PCSi or SBSi modifiers offers promise for improving the surface hemocompatibility of TiAl(6)V(4) and is attractive for its ease of application to geometrically complex metallic blood contacting devices.

Lubricity and stability of poly(2-methacryloyloxyethyl phosphorylcholine) polymer layer on Co-Cr-Mo surface for hemi-arthroplasty to prevent degeneration of articular cartilage

Migration of the artificial femoral head to the inside of the pelvis due to the degeneration of acetabular cartilage has emerged as a serious issue in resurfacing or bipolar hemi-arthroplasty. Surface modification of cobalt-chromium-molybdenum alloy (Co-Cr-Mo) is one of the promising means of improving lubrication for preventing the migration of the artificial femoral head. In this study, we systematically investigated the surface properties, such as lubricity, biocompatibility, and stability of the various modification layers formed on the Co-Cr-Mo with the biocompatible 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer by dip coating or grafting. The cartilage/poly(MPC) (PMPC)-grafted Co-Cr-Mo interface, which mimicked a natural joint, showed an extremely low friction coefficient of <0.01, as low as that of a natural cartilage interface. Moreover, the long-term stability in water was confirmed for the PMPC-grafted layer; no hydrolysis of the siloxane bond was observed throughout soaking in phosphate-buffered saline for 12 weeks. The PMPC-grafted Co-Cr-Mo femoral head for hemi-arthroplasty is a promising option for preserving acetabular cartilage and extending the duration before total hip arthroplasty.

Guest aggregation within poly(L-lactic acid)/pluronic P104 thin films

Rhodamine 6G (R6G) doped thin films composed of poly(L-lactic acid) (PLLA) and Pluronic P104 were spin cast onto glass microscope slides and characterized by ultraviolet-visible, steady-state, and time-resolved fluorescence spectroscopy. The results show that R6G aggregation within the film increases as the R6G concentration and P104 loading increases. These results suggest an approach for studying drug distributions (monomers, aggregates) within biodegradable polymer formulations.