Is food particle size a criterion for the initiation of swallowing?

Unveiling the Influence of the Curve of Spee on Bite Force and Chewing Ability: A Comparative Study

Aim

To investigate the impact of the curve of Spee (CS) accentuation on bite force, chewing ability, and additionally, other factors that influence chewing ability and bite force such as restorations, caries, gender, habits, and TMJ problems.

Materials and Methods

231 participants (118 male and 113 female, mean age = ±27.96 years) were recruited for this cross-section study. Participants completed a data collection sheet in which age, gender, Angle's classification of malocclusion, overjet, overbite, TMJ problems, habits, restorations, and caries experience were recorded. Two examiners made a lower impression, chewing ability test and measured the bite force for each participant. Measurement of the CS was obtained digitally from the poured dental cast, and the categorization was as follows: flat (<1 mm), normal (1-2 mm), or deep (>2 mm).

Results

The mean maximum bite force (MBF) was 468.722 N for participants with flat CS, 389.822 N for normal CS, 647.08 N for deep CS, and 384.667 N for reverse CS. The average MBF was higher for participants with deep CS (p < 0.05). MBF force was higher in males. However, BMI was not significantly related to MBF values. Participants with normal and flat CS have comparable chewing capacity (p > 0.05). Also, a significant difference in bite force and chewing ability was found between the three categories of CS (p < 0.05).

Conclusion

Bite force variations across various CS types were linked to gender and habits. Chewing ability showed no differences concerning gender, habits, TMJ problems, caries, or restorations, emphasizing CS's significant impact on bite force while showcasing the unchanged nature of chewing ability amidst diverse factors.

Chewing and its influence on swallowing, gastrointestinal and nutrition-related factors: a systematic review

The study aimed to evaluate the hypothesis that chewing is a mechanical and physiological contributor to swallowing, physiologic/pathologic processes of the gastrointestinal tract (GIT), and nutrition-related factors. A search strategy was applied to three different databases to investigate if chewing function in adults affects the swallowing, physiologic/pathologic processes of the GIT, and nutrition-related factors compared to controls with no exposure. The included studies were evaluated for methodological quality and risk of bias and certainty of evidence. The results showed 71 eligible studies. Overall, the results showed that 46 studies supported the hypothesis while 25 refuted it. However, the GRADE analysis showed low to very low certainty of the evidence to support the hypothesis that chewing is an important contributor in the swallowing process, and physiologic/pathologic processes in the GIT. The GRADE analysis also showed a moderate to very low certainty of the evidence to suggest that chewing function contributes to nutrition-related parameters. The overall results of the current study showed that a majority (64.7%) of the studies (46 out of 71) supported the hypothesis. However, robust studies with proper design, adequate sample size, and well-defined outcome parameters are needed to establish conclusive evidence.

Masticatory performance in patients with jaw muscle pain: A case control study

Introduction

Masticatory function is often impaired in patients with painful temporomandibular disorders (TMD) therefore more detailed studies on comminution and mixing ability are warranted in well-defined TMD patients with chronic myalgia. Moreover, there is a need to explore the correlation between any changes in perceived pain or fatigue in such patients and the masticatory function.

Materials and methods

Self-assessments using questionnaires regarding pain, oral health, jaw function, masticatory ability, fear of movement and psychosocial signs were answered by all the participants. A series of chewing tasks involving viscoelastic food and two-colored gum was performed. Optical imaging and analyzing was conducted. Bite force as well as characteristics of pain and fatigue were assessed.

Results

In patients, the fragmented soft candy particles were less in number and had larger median of area and minimum Feret's diameter after standardized chewing compared to healthy individuals (P = 0.02). Surprisingly, the two-colored Hue-Check gum was less mixed by the healthy controls since they displayed a greater variance of the hue (P = 0.04). There were significant differences between the patients and the healthy controls in the self-assessed masticatory ability mainly regarding pain-related variables.

Conclusions

Objectively, TMD patients with chronic myalgia exhibited an impaired masticatory performance with less efficiency in comminuting soft viscoelastic food compared to the pain-free healthy control group. There was an agreement between the patients' self-assessed masticatory ability and the efficiency of their masticatory function.

The particle size of rice flour greatly affects the structural, textural and masticatory properties of steamed rice cake (Baekseolgi)

In this study, steamed rice cakes prepared with different particle sized flour were used to investigate how the structures of rice cakes affected masticatory properties and bolus starch hydrolysis. Decreasing the particle size increased the surface areas requiring hydration, resulting in a loose structure and fluffy starch network during gelatinization. Increasing the particle size led to a tight and firm network, but was easily melted in the oral cavity. The chewing cycle and time differed among the samples. The conditions of inter-individual salivary flow rate and salivary α-amylase were diverse. The oral carbohydrate hydrolysis in the bolus before swallowing showed no significant differences in reducing sugar levels among particle sizes. However, salivary concentration was related to initial starch hydrolysis in the oral cavity, indicating the food structures affected mastication factors and physiological conditions. This study provides food structure and physiological factor information that could help design customized foods in industry.

Impact of Individual Differences in Eating Rate on Oral Processing, Bolus Properties and Post-Meal Glucose Responses

PURPOSE

Modifying food texture has been shown to influence oral processing behaviour. We explored the impact of food texture on oral processing, bolus formation and post-prandial glucose responses (PPG) among fast and slow eaters.

METHODS

Male participants (N=39) were split into fast or slow eaters based on natural differences in eating rate when consuming two carbohydrate-equivalent test-meals differing in texture (white rice and rice cake). PPG and satiety responses were compared for fast and slow eaters over 120-min for each test-meal. Each groups test-meal PPG was compared for bolus and saliva properties at the point of swallow.

RESULTS

White rice displayed lower instrumental hardness, chewiness and Young's modulus and was perceived less chewy, springy and sticky than rice cake. Slow eaters (n=24, white rice: 13.3 g/min; rice cake: 15.1 g/min) required an average 42% more chews per bite (p < 0.001), had 60% longer oral exposure time (OET), and consumed both test-meals (p < 0.001) at half the eating rate of fast eaters (n=15). Slow eaters had higher PPG following the rice cake meal at 15 (p = 0.046) and 45 min (p = 0.034) than fast eaters. A longer OET was a positive predictor of early PPG at 30-min after the white rice meal (β = 0.178, p = 0.041) and saliva uptake was a significant predictor (β = 0.458, p = 0.045) of PPG for slow eaters when consuming rice cake. Increasing food hardness and stiffness (Young's modulus) had a greater impact on eating rate for slow eaters than fast eaters.

CONCLUSIONS

Eating rate, oral exposure time and bolus saliva uptake were the predictors of an individual's post-prandial glycaemic response amongst slow eaters. Increasing the number of chews per bite with a longer oral exposure time increased saliva uptake in the bolus at the moment of swallowing and enhanced temporal changes in PPG, leading to greater glycaemic peaks in rice cake meal. Differences in eating rate between slow and fast eaters when consuming rice cake meal influenced temporal changes in PPG but not total PPG, and bolus properties did not differ between eating rate groups.

The Test of Masticating and Swallowing Solids (TOMASS): Normative data for two crackers available in the Scandinavian and international markets

PURPOSE

To establish normative data of crackers common in the Scandinavian and international markets for use in the Test of Masticating and Swallowing Solids (TOMASS), and to investigate possible sex and age effects on masticatory performances.

METHOD

234 healthy participants (>20 years of age) were asked to either ingest the Göteborgskex Guld Marie™ cracker (n = 234) or to ingest both a Guld Marie cracker and a Tuc Original™ cracker (n = 115). Quantifiable measures of masticatory performance (number of bites, number of chewing cycles, number of swallows, and total time) were observed during TOMASS for each participant, directly on-site or by video recording.

RESULT

There were no significant differences in masticatory performances between the crackers. Significant age effects were observed for all masticatory measurements, except for the number of swallows. The results showed insufficient support for an effect of sex, and that results obtained on-site and from video recordings were highly correlated.

CONCLUSION

These findings suggest that similar masticatory performance is to be expected when performing TOMASS using the evaluated crackers. The age of the participant affects TOMASS performance, but the effect of sex is considerably smaller.

Consensus on the terminologies and methodologies for masticatory assessment

A large number of methodological procedures and experimental conditions are reported to describe the masticatory process. However, similar terms are sometimes employed to describe different methodologies. Standardisation of terms is essential to allow comparisons among different studies. This article was aimed to provide a consensus concerning the terms, definitions and technical methods generally reported when evaluating masticatory function objectively and subjectively. The consensus is based on the results from discussions and consultations among world‐leading researchers in the related research areas. Advantages, limitations and relevance of each method are also discussed. The present consensus provides a revised framework of standardised terms to improve the consistent use of masticatory terminology and facilitate further investigations on masticatory function analysis. In addition, this article also outlines various methods used to evaluate the masticatory process and their advantages and disadvantages in order to help researchers to design their experiments.

Early Postoperative Masticatory Efficiency After Surgical Extraction of a Partially Impacted Mandibular Third Molar

The extraction of mandibular third molars is a traumatic procedure accompanied by marked clinical symptoms in the postoperative period. The aim of the present study was to determine the effects of the removal of a partially impacted mandibular third molar on the masticatory efficiency in patients in the early postoperative period.

Material and methods. A total of 47 participants, divided into two groups, took part in this pilot study. The first group included 33 patients with a mean age of 18.3 years (SD = 0.9 years), defined as the Control group; the second group involved patients with a mean age of 33.3 years (SD = 1.86), referred to as the Clinical group. The masticatory efficiency of the Clinical group patients was objectively double-checked using a Protab® test bite: once during the preliminary examination (prior to extraction of the wisdom tooth) and again 7 days after the surgical removal of the wisdom tooth. A sieve analysis was applied to determine the artificial test bite particle size and size distribution following mastication. Feedback on the Clinical group patients’ assessment of any subjective complaints was obtained through a questionnaire containing two questions considered relevant to patients’ masticatory efficiency. The data from the sieve analysis of each fraction were analyzed using the Statistics Software Package for Epidemiological and Clinical Research (IBM SPSS V.20.00).

Results. The data processing of all parameters tested prior to and after extraction of the wisdom tooth revealed statistically significant differences. Only the duration of chewing after the third molar extraction matched the chewing duration in the healthy control subjects (p = 0.198). The analysis of the feedback on the self-assessment of patients from the Clinical group demonstrated that prior to extraction all subjects (100%) experienced pain to a varying degree, whereas in half of the patients (50%) the pain disappeared following extraction. The Spearman’s test for correlation between mean particle sizes as well as the questionnaire feedback indicated a strong positive relationship with food trapping. Accordingly, the larger mean particle size was linked to the self-assessment of food trapping around the wisdom tooth prior to extraction (Spear-man’s Rho = 0.57, p = 0.032). There was also a correlation between the chewing time and the sensation of pain in the teeth adjacent to the extraction wound. The results suggested that the shorter duration of chewing was associated with a greater sensation of pain (Spear-man’s Rho = -0.61, p = 0.026).

Conclusion. The eruption of mandibular third molars causes difficulties in the masticatory process. A positive trend was observed towards normalizing of the chewing duration following extraction (t = -1.356, p = 0.198).

Which variables should be controlled when measuring the granulometry of a chewed bolus? A systematic review

The distribution of food particles in a chewed bolus characterizes the food destruction after food oral processing (FOP). Previous reviews report that it could be affected by a lot of parameters as the number of chewing strokes, the dental status, but the conditions for producing reproducible data allowing inter-studies comparison have not been clearly described yet. This systematic review aims to identify the variables that can affect bolus granulometry determination, and to calculate their relative weights in the median particle size (D₅₀ ) variations. The systematic review focuses on granulometry expressed as D50 of the most used foods (peanuts, carrots, and almonds) and materials (Optosil and Optocal). Based on 58 studies, 5 variables among 60 being extracted could explain the D₅₀ variations. Conceptual differences between the conditions for FOP should be considered. After Chewing-test, the bolus is collected after a predefined number of strokes and its granulometry characterizes the effects of the dental and muscular apparatus on food destruction, while after Mastication-test the bolus is collected at the swallowing threshold, and its granulometry reflects the outcome of the abilities of the subject to adapt his/her mastication behavior to food texture. Experimental conditions related either to physical sieving or image analysis used to analyze the collected boluses impact the D₅₀ values. Finally, when type of test, sieving conditions, type of food or material, number of chewing strokes, and the oral status of the subjects are controlled, mean D₅₀ values are reproducible and could be used for inter-studies comparisons. PRACTICAL APPLICATIONS: This review provides tables that could be useful to control mean D₅₀ variations in further research.

Salivary functions in mastication, taste and textural perception, swallowing and initial digestion

Saliva exerts multiple functions in relation to the initial digestive processes taking place in the upper parts of the gastrointestinal tract. Ingestion of food and beverages, in turn, is a strong stimulus for secretion of saliva with a differential composition depending on the neuronal stimulation pattern. This review paper provides insight into the mechanisms by which saliva acts in relation to taste, mastication, bolus formation, enzymatic digestion and swallowing. Also, the protective functions of saliva including maintenance of dental and mucosal integrity will be discussed as they indirectly influence the digestive process. The final part of this study focuses on the implications of xerostomia and salivary gland dysfunction on gastrointestinal functions.

The effect of mastication on food intake, satiety and body weight

As mastication is the major component of the oral processing of solid foods a better understanding of its influence on ingestion, digestion and metabolism may lead to new approaches to improve health. A growing number of studies provide evidence that mastication may influence energy balance through several routes: activation of histaminergic neurons, reducing eating rate, altered digestion kinetics, and changes in macronutrient availability. Indeed, accumulating evidence indicates that increasing the number of masticatory cycles before swallowing reduces food intake and increases satiety. However, while slowing eating rate has been shown to limit weight gain in children and adolescents it is not clear that slowing eating rate by increasing the number of masticatory cycles or slowing mastication rate is a viable method to aid weight management ([10], [15]). Further research is required to determine the influence of mastication on energy balance and how it could be manipulated to aid weight management. This narrative review will provide a brief overview of the effect of mastication on food intake, satiety and body weight.

Perception and measurement of food texture: Solid foods

There is still a gap between instrumental measurement and sensory evaluation because of the complexity of food texture in spite of many efforts. In sensory evaluation, the terms describing the texture should be well understood by panelists, which poses a problem of establishing lexicons and training panelists. In the instrumental measurement, more efforts are required to understand the large deformation and fracture behavior of foods. The texture profile analysis (TPA) proposed by Alina Szczesniak, Malcolm Bourne, and Sherman has been applied to many foods, and was useful to develop the understanding of textures. But sometimes confusion of the interpretation of TPA parameters appeared. Many new techniques have been introduced to quantify TPA parameters. Recent efforts to fill the gap between sensory evaluation and instrumental measurements, human measurements, or physiological measurements have been introduced. This endeavor is an effort of synthesizing the dentistry and biomedical approach, sensory and psychological approach, and material science approach, and therefore, the collaboration among these disciplines is necessary. This manuscript mainly discusses texture studies for solid foods.

PRACTICAL APPLICATIONS

To fill the gap between the sensory evaluation and the instrumental measurement of texture, it is necessary to examine the physical change of foods during the oral processing. This will give us the designing principle of palatable and safe foods.

Muscle activity and masticatory efficiency with bilateral extension base removable partial dentures with different cusp angles

STATEMENT OF PROBLEM

Whether masticatory efficiency and electromyographic activity are influenced by type of artificial teeth and food is unclear.

PURPOSE

The purpose of this clinical study was to evaluate the influence of extension base removable partial dentures (RPDs) with different cusp angles: anatomic (33 degrees), semianatomic (20 degrees), and nonanatomic (0 degrees) teeth on masticatory efficiency and muscle activity during the mastication of test foods with different textures.

MATERIAL AND METHODS

Twelve participants with RPDs were selected to perform masticatory efficiency and electromyographic tests. Surface electromyograms (EMGs) were used to record the activities of the masseter and temporalis muscles during the mastication of different types of test foods. The maximal voltage and duration were measured on the integrated EMG signal in each muscle during food mastication, and the mean reading of both sides was then recorded. Analysis of variance and the Tukey post hoc test were used to perform statistical analyses (α=.05).

RESULTS

The masticatory efficiency of RPDs with nonanatomic teeth was significantly inferior to that of RPDs with anatomic and semianatomic teeth (P<.05). However, masticatory efficiency did not differ between anatomic and semianatomic teeth (P>.05). Also, muscle activity (according to EMG) with RPDs with NA teeth was significantly higher than that with anatomic and semianatomic teeth (P<.05).

CONCLUSIONS

RPDs with NA teeth were associated with higher EMG muscle activity and reduced masticatory efficiency than anatomic or semianatomic teeth.

Particle Size Distribution of Food Boluses after Mastication of Six Natural Foods

There is a large variability between and among individuals in the physiology of mastication, but it is not known whether this produces a similar variability in the particle sizes of food boluses at the end of the chewing process. Food boluses obtained just before swallowing were analyzed in ten subjects (aged 36.7 ± 9.5 yrs) with normal dentition. Food samples of 3 nuts (peanut, almond, pistachio) and 3 vegetables (cauliflower, radish, and carrot) were chewed and expectorated after self-estimated complete mastication. Measurements with sieving and laser diffraction methods indicated that particles were much larger in vegetables than in nuts. Particle size distributions were similar among nuts and among vegetables. Surprisingly, no inter-individual variability was observed in the particle distributions for the 6 foods, although several sequence variables differed markedly. A need for a bolus to be prepared with a precisely determined texture before it can be swallowed may explain the inter-subject variability of the masticatory function.

Influence of time and different tooth widths on masticatory efficiency and muscular activity in bilateral free-end saddles

PURPOSE

To evaluate the influence of time on masticatory efficiency and muscular activity during mastication of different types of test foods in participants fitted with a lower bilateral free-end saddle removable partial denture (RPD) with wide or narrow teeth.

METHODS

Thirty-six participants consented to undergo evaluation of their masticatory efficiency and recording of their muscular activity, while they wore an RPD with a unified bilateral design, during mastication of different types of test foods. The width of the artificial teeth was changed as follows. Initially (A), the length was adjusted so that the distal end of the mandibular second molars occluded with the distal end of the maxillary second molar (buccolingual width of 7-8 mm). Next (B), the width was decreased to half the maxillary second molars (buccolingual width of only 5 mm). A statistical analysis was performed using SAS software. One-way analysis of variance (ANOVA) was performed followed by Duncan's multiple range tests.

RESULTS

At the 2-month follow-up visit, wider teeth demonstrated greater masticatory efficiency than narrower teeth. However, after 4 months, no significant differences were observed between the two tooth widths. No significant differences in muscular activity were observed.

CONCLUSION

A reduction of the occlusal table width in free-end saddle RPDs resulted in decreased masticatory efficiency 2 months after denture fabrication, but there was no significant difference in muscular activity between narrow and wide teeth. However, after 4 months, the masticatory efficiency of the participants with narrower teeth improved without any changes in muscular activity.

Masticatory efficiency and muscular activity in removable partial dental prostheses with different cusp angles

STATEMENT OF PROBLEM

The loss of posterior teeth has a negative effect on the masticatory efficiency and activity of mastication muscles. How these muscles are affected by partial removable dental prostheses (PRDPs) with different cusp angles is unknown.

PURPOSE

The purpose of this clinical study was to evaluate the influence of different cusp angles, with anatomic (33 degrees), semianatomic (20 degrees), and nonanatomic teeth (0 degree), on the masticatory efficiency and muscular activity of participants receiving mandibular bilateral distal PRDPs.

MATERIAL AND METHODS

Fifteen participants consented to the evaluation of masticatory efficiency and electromyographic (EMG) activity with a PRDP with a unified bilateral design. The cusp angles of the artificial teeth were randomly changed from anatomic (33 degrees), semianatomic (20 degrees), and nonanatomic teeth (0 degree). Masticatory efficiency was evaluated by recording 5 parameters, including number of strokes, and time of mastication while the EMG activities of the masseter and temporalis muscles, measured using surface electromyography. The data were analyzed with 1-way ANOVA and the Tukey multiple post hoc test with statistical software (α=.05).

RESULTS

With regard to masticatory efficiency, PRDPs with anatomic and semianatomic teeth exhibited higher masticatory efficiency than those with nonanatomic teeth, whereas no significant differences were found between PRDPs with anatomic and semianatomic teeth. With respect to EMG activity, the least EMG activity was observed in PRDPs with anatomic teeth, whereas the highest activity was observed with nonanatomic teeth. No significant differences were found between the effect of PRDPs with anatomic and semianatomic teeth on masseter activity.

CONCLUSIONS

Changing the cusp angle from 33 to 20 degrees in PRDPs did not influence the masticatory efficiency or the EMG activity of the masseters. However, it did lead to increased EMG activities of the temporalis muscle. PRDPs with nonanatomic teeth were associated with a significant decrease in masticatory efficiency accompanied by a significant increase in EMG activity.

Short-term improvement of masticatory function after implant restoration

Purpose

Dental implants present several advantages over other tooth replacement options. However, there has been little research on masticatory function in relation to implant treatment. Therefore, the aim of the present study was to evaluate the improvement of masticatory function two weeks after implant restoration.

Methods

Masticatory ability was evaluated with the subjective food intake ability (FIA) and objective mixing ability index (MAI) methods. Fifty-four subjects with first and second missing molars completed the study. The subjects were asked to complete a self-reported questionnaire about 30 different food items, and to chew wax samples 10 times both before and two weeks after implant restoration. A total of 108 waxes were analyzed with an image analysis program.

Results

Dental implant restoration for lost molar teeth on one side increased the FIA score by 9.0% (P<0.0001). The MAI score also increased, by 14.3% after implant restoration (P<0.0001). Comparison between the good and poor mastication groups, which were subdivided based on the median MAI score before implant restoration, showed that the FIA score of the poor group was enhanced 1.1-fold while its MAI score was enhanced 2.0-fold two weeks after an implant surgery.

Conclusions

Using the FIA and MAI assessment methods, this study showed that masticatory function was improved two weeks after implant restoration. In particular, the enhancement of masticatory function by implant restoration was greater in patients with relatively poor initial mastication than in those with good initial mastication.

Particle Size Distribution of Food Boluses and Validation of Simulation During Artificial Indenter Crushing

To study the effects of indenter surface shapes on the crushing of foods, a double-tooth indenter (DTI), a single-tooth indenter (STI), a cylinder-type indenter (CTI) and a wave-type indenter (WTI) were developed by simulating the crown of human molar. Crushing experiments and analysis of finite element simulation were done. Crushing effect was determined by the wet sieving and weighing method; numerial simulations were performed for the crush process using the non-linear contact finite element method. The results showed that the DTI yielded the smallest median size among the four indenters, and the granulometric characteristics of food bolus are similar to human boluses, have higher von Mises stress value than others, higher crush efficiency, bigger crush stress, more stress concentration area than others. The crushing efficiencies of STI and CTI are very close. This study can improve the indenter parameters of texture analyzers and optimize the design process of a food chewing robot.

Increasing the number of chews before swallowing reduces meal size in normal-weight, overweight, and obese adults

Eating slowly contributes to a lower risk of obesity, probably because it could aid appetite control. Chewing thoroughly is an effective strategy to reduce eating rate; however, insufficient data are available to demonstrate the relationship between such an eating behavior and energy intake. To investigate the effect of increasing the number of chews before swallowing on meal size, a randomized cross-over trial was conducted in 18- to 45-year-old normal-weight, overweight, and obese participants (n=45) who were recruited from the local community (Ames, IA). After assessment of baseline number of chews, participants were asked to attend three test sessions to eat pizza for lunch until comfortably full by chewing each portion of food either 100%, 150%, or 200% of their baseline number of chews before swallowing. Two-way analysis of variance was used to test the effect of treatment and body-weight status, as well as their interactions on food intake, meal duration, eating rate, and appetite at meal termination. Appetite data during 60 minutes were analyzed by repeated measures analysis of variance. Food intake in the sessions with 150% and 200% of their baseline number of chews was reduced significantly, by 9.5% and 14.8%, respectively, compared with the 100% session. Increasing the number of chews also prolonged meal duration and reduced eating rate. However, subjective appetite at meal termination or during the immediate postprandial period did not differ. These data indicate that increasing the number of chews before swallowing might be a behavioral strategy to reduce food intake and potentially aid body-weight management.

The role of oral soft tissues in swallowing function: what can tongue pressure tell us?

Tongue pressure data taken from healthy subjects during normal oral activities such as mastication, speech and swallowing are providing us with new ways of understanding the role of the tongue in craniofacial growth and function. It has long been recognized that the sequential contact between the tongue and the palate plays a crucial role in the oropharyngeal phase of swallowing. However, because the focus of most research on intraoral pressure has been on the generation of positive pressure by the tongue on the hard palate and teeth, generation and coordination of absolute intraoral pressures and regional pressure gradients has remained unexplored. Ongoing research in our laboratory has uncovered highly variable individual pressure patterns during swallowing, which can nonetheless be divided into four stages: preparatory, primary propulsive, intermediate and terminal. These stages may further be sub-classified according to pressure patterns generated at the individual level as tipper or dipper patterns in the preparatory stage, roller or slapper in the primary propulsive and monophasic or biphasic during the intermediate stage. Interestingly, while an increase in bolus viscosity can result in significant changes to pressure patterns in some individuals, it has little effect in others. Highly individual responses to increased viscosity are also observed with swallowing duration. The above, together with other findings, have important implications for our understanding of the aetiology of widely differing conditions such as protrusive and retrusive malocclusions, dysphagia and sleep apnoea, as well as the development of novel food products.

Increasing the number of masticatory cycles is associated with reduced appetite and altered postprandial plasma concentrations of gut hormones, insulin and glucose

To determine the influence of masticatory efficiency on postprandial satiety and glycaemic response, twenty-one healthy males were recruited for this randomised cross-over trial. The participants consumed a fixed amount of pizza provided in equal-sized portions by chewing each portion either fifteen or forty times before swallowing. Subjective appetite was measured by appetite questionnaires at regular intervals for 3 h after the meal and plasma samples were collected for the measurement of selected satiety-related hormones, glucose, insulin and glucose-dependent insulinotropic peptide (GIP) concentrations. An ad libitum meal was provided shortly after the last blood sample was drawn and the amount eaten recorded. Compared with fifteen chews, chewing forty times per portion resulted in lower hunger (P= 0·009), preoccupation with food (P= 0·005) and desire to eat (P= 0·002). Meanwhile, plasma concentrations of glucose (P= 0·024), insulin (P< 0·001) and GIP (P< 0·001) were higher following the forty-chews meal. Chewing forty times before swallowing also resulted in a higher plasma cholecystokinin concentration (P= 0·045) and a trend towards a lower ghrelin concentration (P= 0·051). However, food intake at the subsequent test meal did not differ (P= 0·851). The results suggest that a higher number of masticatory cycles before swallowing may provide beneficial effects on satiety and facilitate glucose absorption.

A two-colored chewing gum test for assessing masticatory performance: a preliminary study

This study was conducted to compare subjective and objective assessment methods of a two-colored chewing gum test and to find out whether these methods are capable of discriminating masticatory performances between sexes. 31 adults, 16 males and 15 females participated in this study. Each subject chewed five samples of two-colored chewing gum sticks for 5, 10, 20, 30 and 50 chewing strokes, respectively. The subjective color-mixing and shape indices for the gum bolus (SCMI-B, SSI-B) and the subjective color-mixing index and objective color-mixing ratio for the gum wafer (SCMI-W, OCMR-W) were evaluated by two independent examiners and, on a different day, re-evaluated by one of the examiners. The SCMI-B and SCMI-W assessments had inter- and intra-examiner reliable agreement at 20 or more chewing strokes. The OCMR-W measurement demonstrated high accuracy and low reproducibility between and within the examiners. There were significant gender differences in the distribution of SCMI-W scores (P = 0.044) and in the mean OCMI-W (P = 0.007). The SCMI-B and SCMI-W assessments and the OCMR-W measurement were reliable and valid at the 20 and 30 chewing strokes in this two-colored chewing gum test. The subjective color-mixing index (SCMI-W) and objective color-mixing ratio (OCMR-W) for the chewing gum wafer are capable of discriminating masticatory performance between sexes in this two-colored chewing gum test and that the OCMR-W measurement is discriminating better than the SCMI-W assessment.

Role of physical bolus properties as sensory inputs in the trigger of swallowing

Background

Swallowing is triggered when a food bolus being prepared by mastication has reached a defined state. However, although this view is consensual and well supported, the physical properties of the swallowable bolus have been under-researched. We tested the hypothesis that measuring bolus physical changes during the masticatory sequence to deglutition would reveal the bolus properties potentially involved in swallowing initiation.

Methods

Twenty normo-dentate young adults were instructed to chew portions of cereal and spit out the boluses at different times in the masticatory sequence. The mechanical properties of the collected boluses were measured by a texture profile analysis test currently used in food science. The median particle size of the boluses was evaluated by sieving. In a simultaneous sensory study, twenty-five other subjects expressed their perception of bolus texture dominating at any mastication time.

Findings

Several physical changes appeared in the food bolus as it was formed during mastication: (1) in rheological terms, bolus hardness rapidly decreased as the masticatory sequence progressed, (2) by contrast, adhesiveness, springiness and cohesiveness regularly increased until the time of swallowing, (3) median particle size, indicating the bolus particle size distribution, decreased mostly during the first third of the masticatory sequence, (4) except for hardness, the rheological changes still appeared in the boluses collected just before swallowing, and (5) physical changes occurred, with sensory stickiness being described by the subjects as a dominant perception of the bolus at the end of mastication.

Conclusions

Although these physical and sensory changes progressed in the course of mastication, those observed just before swallowing seem to be involved in swallowing initiation. They can be considered as strong candidates for sensory inputs from the bolus that are probably crucially involved in the triggering of swallowing, since they appeared in boluses prepared in various mastication strategies by different subjects.

Videoendoscopic measurement of food bolus formation for quantitative evaluation of masticatory function

PURPOSE

In the field of prosthodontics, many methods for evaluating the masticatory function involve ejection of the food bolus from the mouth. In addition, these methods could not evaluate mastication and swallowing function comprehensively. The present study aimed to quantitatively evaluate masticatory functions during a series of masticatory and swallowing movements by using videoendoscopy.

METHODS

Subjects are ten healthy dentulous adults without dysphagia. The test foods used were 2-colored (green and white) molded rice and uirou (rice cake). The test foods were consumed under the restriction on the number of mastication (10, 15, 20, and 30), and under the instruction to "chew normally" or "chew well". The masticatory function was evaluated by observing the food bolus in the oropharynx with a videoendoscope. The bolus formation index (BFI), in terms of the degree of mixing of the green and white parts, was quantitatively determined using an image measurement software.

RESULTS

The BFI of the rice and uirou increased significantly with increase in the number of mastication times (p<0.01). A significantly correlation coefficient was observed between the BFI and the number of mastication (0.84 for rice and 0.89 for uirou). The BFI obtained by "chewing well" was significantly higher than that obtained by "chewing normally" (p<0.01).

CONCLUSIONS

The results of this study confirm that the endoscopic measurement of food bolus formation by mastication in terms of the color tones of 2-colored test foods enables quantitative evaluation of the masticatory function during a series of masticatory and swallowing movements.

Rehabilitation of masticatory function improves the alveolar bone architecture of the mandible in adult rats

Masticatory functional changes have been shown to influence the quantity and quality of the alveolar bone during growth. This study was designed to investigate the effect of masticatory function rehabilitation on the morphology and the trabecular architecture of the mandibular alveolar bone after cessation of growth. Forty-four Sprague-Dawley male rats received soft diet in order to develop masticatory muscle hypofunction. After 21 weeks, after cessation of growth, the animals were divided into two groups: the first group continued receiving soft diet for six more weeks (hypofunction group), while the second group changed to ordinary (hard) diet with the aim to restore a normal masticatory function (rehabilitation group). A third group of 16 male rats (normal group) received ordinary (hard) diet during the whole experimental period and served as control. Micro-tomographic histomorphometry was used to evaluate the architecture of the mandibular alveolar bone (e.g. bone volume fraction, trabecular thickness, trabecular separation, etc.) at the end of the experiment (27 weeks). The height and width of the alveolar process were measured as well. The alveolar process trabecular bone volume fraction (BV/TV) was lower for the animals of the hypofunctional group as compared to those of the normal (p<0.01) and the rehabilitation (p<0.05) groups. Despite the significant improvement observed in the rehabilitation group, their BV/TV was lower in comparison to the normal group (p<0.05) at the end of this experiment. All the other micro-tomographic parameters followed the same pattern of change between groups; values of the rehabilitation group were between the values of the two other groups, differing significantly from both of them. The alveolar process was significantly shorter in the normal group in comparison to both the hypofunctional and rehabilitation groups (p<0.05). On the other hand, both the normal and rehabilitation groups were had a wider alveolar process than the hypofunctional group (p<0.05). Both alveolar height and width were significantly correlated with all micro-tomographic parameters under study. The rehabilitation of masticatory function led to a significant improvement of alveolar bone architecture in adult rats, although the negative effects of hypofunction were not totally reversed during the period under study.

The masticatory normative indicator

There is no established quantitative, objective method to differentiate individuals with good masticatory function from those lacking this attribute. The aim of this study was to specify a normal range of median particle size values for masticated raw carrots collected just before being swallowed. The masticatory normative indicator (MNI) value thus obtained was based on seven studies carried out by different investigators using different methods for measuring particle size in carrot boluses. A simple mathematical transformation of variables and the choice of an interval of +/-1.96 times the standard deviation gave 4.0 mm as the upper limit of normal median particle size for carrots in a population of young persons with good oral health. This value identifies boluses that may be considered as resulting from impaired mastication, as illustrated in healthy individuals with experimentally hampered mastication, denture wearers, and individuals presenting with obesity or Down syndrome.

Effects of Peanut Processing on Masticatory Performance during Variable Appetitive States

Background. Current evidence indicates that peanut consumption reduces cardiovascular disease risk, while posing little threat to positive energy balance. However, questions have been raised as to whether inter- and intraindividual variability in mastication in response to peanut form and processing properties may influence these health effects, since mastication has the potential to alter the bioaccessibility of nutrients within the nut matrix. Objective. To explore the relationship between peanut form and processing and masticatory function. Subjects/Methods. Thirty nine adults (16 M, 23 F; BMI: 30.4 ± 4.0 kg/m²; age: 27 ± 8 y) with healthy dentition chewed four different forms of peanuts until they would normally swallow and then expectorated the bolus. Surface electromyograms (EMGs) were obtained from the masseter and temporalis muscles during chewing of the four test foods. The maximum and mean bite forces, duration of chewing sequence, number of chews, and total muscle work for the complete chewing cycle were measured on the integrated EMG in fasted and sated states. Results. While no significant differences were noted in response to appetitive state, peanut form and processing had a significant influence on masticatory efficiency, as measured by proportional particle size distributions. The processed peanuts (honey roasted, roasted salted, and roasted unsalted) were chewed significantly fewer times compared to the unprocessed form (raw). Further, the proportional particle sizes within the swallowing bolus were significantly larger for the processed forms compared to the unprocessed form. Conclusion. These observations may have implications for bioaccessibility of energy and cardioprotective nutrients as well as endocrine responses, following peanut consumption.

Nutriomic analysis of fresh and processed fruit products. 1. During in vitro digestions

Nutriomic analysis is a postgenomic-based study of nutritious components (nutriome). There is a need for an in vitro digestion and absorption model to unravel interactive factors varying nutriome release from various food materials that cannot be directly studied in humans. Effects of processing and in vitro digestion steps on carotenoid, sugar, and organic acid release from tomato, papaya, and mango products were comprehensively studied for the first time in this research. In vivo chewing experiments using 24 healthy adult volunteers was carried out prior to chewing simulation. Microscopy showed that cutting and blending alone were unlikely to mimic chewing at swallowing point. Using general linear model (GLM) ANOVA and principal component analysis (PCA), effects of interaction between digestion steps and processing types on the nutriome release were significant (p < 0.05) when 90% particles of 0.5 (dried) and 1.5 cm (fresh) were digested in vitro. Generally, dried and fresh fruits released lower levels of nutriome components than juices. PCA indicated nutriome release from tomato products was affected by the factors studied more than those from papaya and mango products. Fruit type is the main determinant factor relative to processing and digestion steps because it determines the extent of matrix that breaks down and consequent nutriome diffusion rates. It is predicted that pectin plays a role in determining the rate of nutriome release and absorption, which requires further investigation.

Mastication of almonds: effects of lipid bioaccessibility, appetite, and hormone response

BACKGROUND

Epidemiologic and clinical data indicate that nuts can be incorporated into the diet without compromising body weight. This has been attributed to strong satiety properties, increased resting energy expenditure, and limited lipid bioaccessibility.

OBJECTIVE

The role of mastication was explored because of evidence that the availability of nut lipids is largely dependent on the mechanical fracture of their cell walls.

DESIGN

In a randomized, 3-arm, crossover study, 13 healthy adults (body mass index, in kg/m(2): 23.1 +/- 0.4) chewed 55 g almonds 10, 25, or 40 times. Blood was collected and appetite was monitored during the following 3 h. Over the next 4 d, all foods were provided, including 55 g almonds, which were consumed under the same chewing conditions. Complete fecal samples were collected.

RESULTS

Hunger was acutely suppressed below baseline (P < 0.05), and fullness was elevated above baseline longer (P < 0.05) after 40 chews than after 25 chews. Two hours after consumption, fullness levels were significantly lower and hunger levels were significantly higher after 25 chews than after 10 and 40 chews (P < 0.05). Initial postingestive glucagon-like peptide-1 concentrations were significantly lower after 25 chews than after 40 chews (P < 0.05), and insulin concentrations declined more rapidly after 25 and 40 chews than after 10 chews (both P < 0.05). Fecal fat excretion was significantly higher after 10 chews than after 25 and 40 chews (both P < 0.05). All participants had higher fecal energy losses after 10 and 25 chews than after 40 chews (P < 0.005).

CONCLUSION

The results indicate important differences in appetitive and physiologic responses to masticating nuts and likely other foods and nutrients. This trial was registered at clinicaltrials.gov as NCT00768417.