The evaluation of direct composite restorations for the worn mandibular anterior dentition ? clinical performance and patient satisfaction

Changes in Oral Health-Related Quality of Life after (non-)restorative treatment of tooth wear in adult patients: A systematic review

OBJECTIVE

Literature was systematically reviewed to determine the impact of tooth wear management on the Oral Health Related Quality of Life (OHRQoL) amongst adult patients with tooth wear.

DATA

A protocol was developed, a priori (PROSPERO CRD42022343108) following the PRISMA guidelines. To assess risk of bias and certainty of evidence the RoB2-tool, JBI-tool, and GRADE were used.

SOURCES

PubMed, Scopus, Cochrane Library, Embase and Web of Science were searched. The first search took place on 21.10.2022, subsequently updated in May 2024.

STUDY SELECTION

Inclusion criteria were RCT's, quasi-RCT's, prospective- or retrospective-studies with adult patients with moderate to severe tooth wear, treated restoratively and/or with counseling and monitoring that were also assessed for OHRQoL during at least two time points. Exclusion criteria were, studies with children, OHRQoL only measured once, narrative and systematic reviews, conference abstracts, technical reports, consensus papers, and any other type of non-clinical study.

RESULTS

Six papers were included in this review. Overall, qualitative analysis revealed an increase in OHRQoL after restorative treatment, and no change in OHRQoL after one year of counseling and monitoring. Some studies showed a slightly negative effect on esthetics in the years post-treatment, and some of the dimensions of the Oral Health Impact Profile (OHIP) did not change or demonstrated minor change only. For the RCT's, blinding of participants and operators was not possible, as the participants had an awareness of the treatment. For the non-RCT's, the primary issue was the lack of control, with a general high risk of bias.

CONCLUSION

The provision of restorative treatment in patients with moderate to severe tooth wear frequently results in a positive impact on OHRQoL. Further research is required to substantiate the importance of OHRQoL for the treatment of (tooth wear) patients.

CLINICAL SIGNIFICANCE

The outcomes may help dentists and researchers better understand the advantages of using PROMS in their clinical work or research as valuable outcomes.

A Systematic Review Evaluating Methods for Diagnosis, Treatment and Prevention of Dental Erosions

AIM

The aim of this systematic review was to investigate the quality of evidence for methods used to diagnose, restore and prevent dental erosions, by evaluating and summarising clinical controlled studies and in situ studies covering this field.

MATERIAL AND METHODS

Three databases, PubMed, Embase and Cochrane database, were searched for studies published until October 2023. Studies fulfilling the selection criteria were selected, and the risk of bias of the included studies was assessed. Two authors independently reviewed the studies, evaluated their risk of bias and extracted data from the included studies. The certainty of evidence of the findings in the studies was determined using GRADE.

RESULTS

The literature search identified 7176 records. Out of these, 19 studies were included in this review, three revolving diagnostics, three revolving treatment and 13 revolving prevention. However, due to the fact that only few studies with a small number of participants have investigated the same methods on the same outcome, the studies do not constitute any body of evidence.

CONCLUSION

This systematic review highlights the shortage of data on methods used for diagnostics, restorative treatment and prevention of dental erosions. More knowledge is needed to strengthen the scientific evidence regarding methods used for dental erosions.

Quo vadis, esthetic dentistry? Part II: Composite resin overtreatment and social media appeal

OBJECTIVES

This article presents case reports highlighting over-treatments with resin composites, often misconceived as minimally invasive procedures.

CLINICAL CONSIDERATIONS

Tooth-colored restorative materials, such as ceramics and composites, have found widespread application to correct problems related to tooth color, shape, and alignment. When composite resin is used, these procedures can be done in a very conservative, cost-effective, and timely fashion. However, it is noteworthy that contemporary dental esthetic expectations are based on standards propagated by social media and other marketing and communications platforms. The abuse of and addiction to social media impacts can lead to unrealistic esthetic expectations and standards for both patients and dentists.

CONCLUSIONS

After a critical discussion on ceramic veneers published in part I of this 2-part series, this article directs attention towards what has become a trendy fashion, i.e., the use of direct composite resins as "non-prep" veneers in clinical situations that arguably required no restorative intervention at all. We further explore how social media influences the decision-making processes of both professionals and patients.

Longevity of Anterior Composite Restorations for Localized Tooth Wear: A Scoping Review

(1) Objective: This scoping review evaluates composite restorations as a treatment modality for anterior tooth surface loss and investigates the longevity of the direct and indirect composites used herein. (2) Method: The search encompassed Medline, Embase, Web of Science, the Cochrane Library, and hand search utilizing the PICO framework. (3) Results: Eight studies were included in this review, comprising one randomized controlled trial, one retrospective, and six prospective studies. Some studies reported favorable outcomes for composite restorations in anterior teeth. Although not statistically significant, evidence supported the anterior composite as a viable short- to medium-term solution for managing tooth wear. Direct resin composites were deemed clinically and cost-effective when managing localized anterior tooth wear. However, limitations and inconsistencies in this scoping review limited definitive clinical recommendations. (4) Conclusions: Further research, including well-managed randomized controlled trials using standardized protocols and longer follow-up periods, is essential to reconfirm the long-term efficacies of anterior composite restorations when managing tooth wear. A robust research design and exacting protocols could facilitate more meaningful clinical conclusions.

The longevity of tooth-coloUred materials used for restoration of tooth wear: an evidence-based approach

Patients with tooth wear are commonly encountered in general dental practice. When indicated, restorative rehabilitation is often accompanied by a request from the patient for an aesthetic, tooth-coloured outcome. This article seeks to provide an evidence-based approach, focussing on the longevity of the materials which can be used for the restorative treatment of tooth wear, as well as their modes of failure and observed performance.

Clinical considerations in the application of direct composite for tooth wear

Various techniques are available for the application of composite to restore worn teeth. Different techniques may be chosen based on the clinical presentation or clinician preference. However, for composite to be successful, there are numerous factors which must be considered in order to optimise the outcome. Pre-treatment steps, such as isolation for optimal moisture control and adequate surface preparation of the tooth, as well as the post build-up objectives of achieving a stable occlusion, good marginal adaptation and final aesthetics, are discussed in the paper.

Epidemiology, aetiology and prevention of tooth wear

Tooth wear is a commonly reported finding globally; however, many patients are unaware of having tooth wear. Identifying early signs of erosion, abrasion or attrition and determining the risk factors contributing to a patient's tooth wear may help to prevent further loss of enamel and dentine in the future. Appropriate prevention should be instigated, or appropriate referral made to other health professionals, when conditions such as gastroesophageal reflux or eating disorders are suspected. This paper presents the epidemiology and aetiological factors for tooth wear, as well as identifying the common clinical presentations of tooth wear. Patient perspectives on tooth wear and preventive techniques that can be utilised are also discussed.

Clinical factors to consider in definitive treatment planning for patients with tooth wear

Diagnosis, disease control and prevention are the precursors to successful definitive restorative treatment of pathological tooth wear. This case series illustrates how proposed key clinical features can influence treatment complexity and provide the clinician with a logical sequence of treatment options for definitive management of tooth wear.

When (and when not) to use the Dahl Concept

The Dahl Concept describes the re-establishment of occlusal contacts after the provision of a planned localised appliance or restoration in supraocclusion. Initially developed to create space for prosthetic rehabilitation of anterior teeth suffering from localised wear, the principle has later been successfully applied to a variety of situations, including the Hall technique and resin-bonded bridges cemented in supraocclusion. Despite high levels of success seen in the relevant literature and widespread adoption in specialist care, the wider profession appears to be far more cautious in its use. This article aims to provide a brief summary of the Dahl Concept and discuss the local and general factors that influence its successful implementation in the hope of promoting its increased adoption by the broader dental profession.

How long does it take for the occlusion to re-establish following the placement of restorations at an increased occlusal vertical dimension? A literature review

Purpose This literature review aimed to investigate predictability of re-establishment of the occlusion following placement of restorations at an increased OVD, duration and to assess the quality of the available evidence.Methods An electronic search of articles using MEDLINE (1946-01/2019), EMBASE (1974-01/2019) and the Cochrane databases was undertaken. Search terms included dental restoration, vertical dimension and time. Studies involving placement of restorations at an increased OVD and recorded the time taken for the occlusion to re-establish were included. Eligibility assessments were carried out independently by two reviewers who also undertook independent extraction of predefined data fields, including study quality indicators.Results The search provided 61 results with 11 being relevant. A further 5 papers were identified for full text analysis. 4 papers used similar data from previous studies and 3 were excluded after full text assessment.. A final total of 9 papers were included in the review. It was indicated that the technique of placing restorations at an increased OVD appears to be clinically predictable in terms of re-establishment of occlusion and appears to occur most rapidly in younger patients.Conclusions The time taken for the occlusion to re-establish was between 15 days to 24 months. However, there is a need for prospective studies to evaluate the process in terms of success, predictive variables and specifically how long the process takes and this information would be helpful for both clinicians and patients, so that they know what to expect before embarking on a treatment.

Two‐year retrospective evaluation of monoshade universal composites in direct veneer and diastema closure restorations

OBJECTIVES

The aim of this retrospective evaluation was to assess the short-term outcome of two monoshade universal resin composites with high chameleon effect in anterior direct veneer and diastema closure restorations, and to investigate the possible reasons for failure.

MATERIAL AND METHODS

Patients subjected to veneer and diastema closure restorations with two monoshade universal resin composites (Essentia Universal Shade; EU, GC Corp., and Omnichroma; OC, Tokuyama) operated between January 2018 and March 2019 were selected for the present retrospective evaluation. A total of 159 composite restorations (78 veneers and 81 diastema closure restorations) performed by a single operator in 44 patients (mean age: 33.6) were included in the study. Two blinded and calibrated examiners performed 1- and 2-year assessments of the restorations with respect to FDI criteria, using medical/clinical history and dental photography records. Data were analyzed using Pearson Chi-square with Continuity Correction, Fisher's Exact tests, and Cox regression (a < 0.05).

RESULTS

The cumulative overall survival rates of EU and OC restorations were 94.6% (97.3% for the first year) and 88.6% (95.3% for the first year), respectively, with no significant difference from each other (p = 0.316). The cumulative overall survival rates of direct veneer and diastema closure restoration types were 90.2% (95.1% for the first year) and 92.4% (97.4% for the first year), respectively, with no significant difference (p = 0.559). The reasons for failure were evaluated as fracture of the restoration, failure in esthetic anatomical form, and color mismatch. All the failed direct veneer restorations were due to fractures (FDI score of 5.4), whereas 5 of 6 failed diastema closure restorations were due to color mismatch (FDI score of 3.4). Regarding the composite materials, there were no significant differences between the success rates of the restoration types (p = 0.442 for EU, p = 1.000 for OC). With respect to the restoration types, there were also no significant differences between the success rates of the resin-based composites (p = 1.000 for direct veneer restorations and p = 0.228 for the diastema closure restorations). In addition, no significant difference was observed between male and female patients regarding the acceptable and unacceptable scores (p = 1.000).

CONCLUSIONS

The 2-year clinical performance of the two monoshade universal composites in anterior veneer and diastema closure restorations were both considered successful and similar. Despite the lack of shade selection, both monoshade universal composites presented a successful color match. However, the diastema closure restorations might be more prone to color mismatch compared to the veneers over time, while veneer restorations presented more fractures than the diastema closure restorations.

CLINICAL SIGNIFICANCE

Monoshade universal composites presented successful short-term clinical outcomes regarding both function and esthetics in anterior direct veneer and diastema closure restorations.

Treatment of Tooth Wear Using Direct or Indirect Restorations: A Systematic Review of Clinical Studies

Tooth wear is considered a well-developed issue in daily clinical practice; however, there is no standard protocol for treatment. The aim of this manuscript was to systematically review the literature to evaluate the clinical outcomes of direct or indirect restorations for treating tooth wear. A literature search was conducted through the PubMed MedLine, Scopus, ISI Web of Science, Scielo, and EMBASE databases up to 29 April 2022. Clinical studies evaluating the clinical performance of direct or indirect restorations for treating tooth wear for a minimum follow-up of 6 months were included in the review. A total of 2776 records were obtained from the search databases. After full-text reading, 16 studies were included in the qualitative analysis. Considering the high heterogenicity of the studies included, a meta-analysis could not be performed. All studies included the rehabilitation of anterior and posterior teeth with extensive wear, using both indirect and direct restorations for a maximum follow-up of 10 years. Restoration materials included ceramo-metal crowns, full gold crowns, lithium disilicate ceramic, zirconia, polymer infiltrated ceramic networks, and resin composites. Most of the reports assessed the survival rate of the restorations and the clinical features using the United States Public Health Service (USPHS) Evaluation System criteria. Contradictory discoveries were perceived concerning the type of restoration with better clinical performance. Considering the current literature available, there is no evidence in the superiority of any restoration technique to ensure the highest clinical performance for treating tooth wear.

Deterioration of anterior resin composite restorations in moderate to severe tooth wear patients: 3-year results

OBJECTIVES

Deterioration in anterior resin composite restorations placed in tooth wear patients was investigated after 36 months.

MATERIALS AND METHODS

Data collected prospectively for 47 participants of the Radboud Tooth Wear Project were used (41 ± 8 years, 90% male, n = 270 restorations). Restorations were individually evaluated using intraoral photographs and 3D scans to rate modified FDI scores and to record the presence of degradation features. Four groups with distinct combinations of composites and techniques were assessed, and multivariable logistic regression models were used to analyze the data (p < 0.05).

RESULTS

For all groups together, early degradation signs were present at 1 month: irregularities (41.5%) and ditching (7.4%) were observed at the surface and adhesive interfaces. The frequency of irregularities decreased in the 36-month evaluation (37%), but ditching (12.2%) and fractures (10.7%) were more common. The most frequent deterioration (based on photographs) was observed for staining (44%) and loss of luster (31%). In 3D scans, the most frequent were for wear (25%), marginal adaptation (24%), and the presence of irregularities (19%). Canines had 5.5 times more chances of deterioration by ditching than incisors (p < 0.001). The differences between composites and restorative techniques were minor.

CONCLUSIONS

A continuous degradation process of restorations placed in tooth wear patients was observed in anterior teeth restored with different composites, with a progression of the deterioration over 36 months.

CLINICAL RELEVANCE

When placing anterior resin composite restorations in tooth wear patients, it could be important to establish realistic expectations and the need for checkup appointments.

Safe clinical technique for increasing the occlusal vertical dimension in case of erosive wear and missing teeth

A safe method to increase the occlusal vertical dimension (OVD) in patients with mild temporomandibular symptoms (such as tenderness upon palpation) is described. After a temporomandibular joint magnetic resonance (MR), an OVD increase was sought, pursuing pure rotational movement without condyle displacement. Prior to definitive rehabilitation, an additional MR confirmed steady and healthy condyle-disc-fossa relationships.

Randomized controlled trial on the performance of direct and indirect composite restorations in patients with severe tooth wear

OBJECTIVE

The study aimed to evaluate survival and failure behavior of Direct Composite Restorations (DRC) and Indirect Composite Restorations (ICR) on molars and anterior teeth, in a Randomized Controlled Trial (RCT).

METHODS

Patients with generalized severe tooth wear were included, and randomly assigned to one of 2 protocols: (1) DCR: All teeth were restored with directly applied micro-hybrid composite restorations (Clearfil AP-X, Kuraray) for load bearing areas and nano-hybrid composite restorations (IPS Empress Direct, Ivoclar Vivadent) for buccal veneers; (2) ICR: First molars were restored with indirect composite 'tabletop' restorations and maxillary anterior teeth were restored with indirect palatal veneer restorations (Clearfil Estenia C&B, cemented with Panavia F, Kuraray). Remaining teeth were restored directly. Restorations were evaluated after 3 years, focusing on clinical acceptability. Statistical analysis was performed using Kaplan Meier curves, Annual Failure Rates (AFRs), and univariate Cox regression analyses (p < 0.05).

RESULTS

41 patients (age: 36.6 ± 6.6y) were evaluated after 3 years (40.0 ± 2.2 m). 408 restorations on first molars and palatal veneers on maxillary anterior teeth were part of this RCT, with 220 DCRs and 188 ICRs. No differences in survival between treatment modality for palatal veneers for any failure criteria were found. Tabletop restorations on first molars showed a considerable higher failure rate for ICR compared to DCR (p = 0.026, HR: 3.37, 95%CI = 1.16-9.81).

SIGNIFICANCE

In this RCT, directly applied composite restorations showed superior behavior compared to the indirect composite restorations, when used in the molar region.

Clinical performance of direct composite resin restorations in a full mouth rehabilitation for patients with severe tooth wear: 5.5-year results

OBJECTIVES

To evaluate the 5.5-year performance of direct resin composite restorations, prescribed for patients with severe tooth wear, requiring full-mouth rehabilitation.

METHODS

A convenience sample of 34 patients were recruited to a prospective trial between December 2010 and June 2013. The participants were provided 1269 full-mouth direct resin composite restorations (Clearfil AP-X) by 5 experienced operators, using the DSO-technique. Treatment resulted in an increase in the vertical dimension of occlusion (VDO). Failure was assessed at three levels. Frequencies of failure were analysed using Kaplan Meier survival curves and the effects of the relevant variables calculated with a multifactorial Cox regression (p < 0.05).

RESULTS

Annual failure rates (for all levels of failure, 'Level 3- ') of ≤ 2.2% and ≤ 2.9% were respectively reported for the anterior and posterior restorations with a mean observation time of 62.4 months. The completion of an anterior restoration with the need for further appointments resulted in significantly more Level 2- & 3- failures. An evaluation of the performance of the premolar and posterior maxillary restorations showed significantly lowered risks of certain types of failures, compared to the molar and posterior mandibular restorations.

CONCLUSIONS

At 5.5 years, 2.3% of the overall restorations displayed catastrophic, (Level 1) failures. Molar restorations, posterior mandibular restorations and the anterior restorations requiring two further sessions for completion, were associated with significantly higher risks for failure.

CLINICAL SIGNIFICANCE

Direct resin composite can offer an acceptable medium-term option for the treatment of severe, generalized tooth wear; molar restorations may require higher maintenance.

McNamara's Fallacies in Dentistry. 2: Tooth Surface Loss Fallacies

Given the number of perceived myths and fallacies in relation to tooth substance loss, this article seeks to address these using a wide variety of clinical cases as examples and by way of scientific references.

CPD/Clinical Relevance: The incidence of tooth wear is increasing, so an understanding of the myths and truths surrounding its treatment is valuable.

Occlusal Vertical Dimension: Best Evidence Consensus Statement

PURPOSE

Patients in need of extensive prosthodontic treatment may need restoration of their occlusal vertical dimension (OVD) due to tooth wear, tooth loss, or changes that have occurred to existing prostheses over time. Prosthodontic treatment is based on the clinical application of the available evidence regarding interocclusal distance (IOD), the positional stability of rest vertical dimension (RVD), and the effect of altering the OVD. Hence, the purpose of this consensus document is to examine available data related to IOD, RVD, and alteration of the OVD.

MATERIALS AND METHODS

The search was limited to Clinical trials, Randomized Controlled Trials, Systematic Reviews and Meta-analyses. Key words were healthy patient, mean, range, interocclusal rest distance; healthy patient, mean, range, freeway space; and dentistry, interocclusal gap, and no citations appeared. Dentistry, interocclusal distance, revealed 5 not relevant citations. Dentistry, inter occlusal rest space, and dentistry, interocclusal rest distance, both had the same single not relevant citation. Dentistry, freeway space revealed over 7,000 citations. Dentistry, occlusal vertical dimension, revealed 253 citations, 7 of which were related to the search question but only 1 which was different from the previous search. Mandible, rest vertical dimension, age changes, found 7 citations, none relative to the question. Expanding the search to include journal article found 260 citations with only one relevant to the question. Mandible, rest vertical dimension, alteration, harm revealed no citations; mandible, occlusal vertical dimension, alteration, revealed 15 citations, 1 of which was relevant; mandible, occlusal vertical dimension, changes, revealed 75 citations, none of which were relevant; mandible, occlusal vertical dimension, rehabilitation revealed 10 citations, none of which were relevant. Expanding the search strategy to include Journal article, mandible, occlusal vertical dimension, alteration, received 159 citations, 4 of which were relevant; mandible, occlusal vertical dimension, restoration revealed 208 citations, 1 of which was relevant. Numerous other articles were culled by going through the reference lists of the aforementioned articles.

RESULTS

For IOD, 27 articles were found relevant to the search question, which confirmed a mean of 3.0 mm with ranges from 1 to 9 mm. Five articles revealed little evidence as to whether the RVD changes during life. For OVD, 20 articles, including 4 systematic reviews, revealed some evidence that skeletal growth continues from mid adolescence into mid adulthood; strong anecdotal evidence that some unopposed teeth will continue to erupt; no clinical evidence to support the concept that abraded teeth in occlusion in a patient with bruxism will undergo continuous eruption; and some evidence from clinical case reports that restoring OVD in patients with severe abrasion is a successful treatment.

CONCLUSIONS

There is a range of dimensions for the interocclusal distance (IOD) with many normal dental patients functioning with a higher or lower IOD than the commonly used 3.0 mm average dimension. The resting vertical dimension (RVD) is a 3-dimensional range with little evidence related to changes in the RVD during life. However, aging can cause a decrease in muscle tone which could affect the RVD. The restoration of the OVD can be successfully accomplished if proper diagnosis and treatment planning are performed.

Facts and Fallacies About Occlusal Philosophies for Full Mouth Rehabilitation

This article reviews various full mouth rehabilitation occlusal concepts along with their main beliefs and controversies. Many of those occlusal teachings were well-meant at the time they were introduced. However, closer examination reveals that many of them involved serious destruction of sound tooth tissue - without delivering many of their purported benefits.The biologic and structural disadvantages of 'subtractive' dental procedures, which were, and still are, undertaken to provide traditional full mouth rehabilitation are discussed. Those approaches are contrasted with the proven advantages of minimally destructive additive techniques, which can solve frequently encountered clinical problems previously deemed to require traditional 'full mouth rehabilitations'. Pragmatic clinical cases are used to illustrate how to solve common clinical problems by using minimally destructive means, without causing structural damage to residual sound tooth tissue.

Longevity of direct diastema closure and recontouring restorations with resin composites in maxillary anterior teeth: A 4-year clinical evaluation

OBJECTIVES

To evaluate the clinical performance of resin composite restorations and to investigate causes of failure.

MATERIALS AND METHODS

The longevity of 216 restorations in 53 patients (mean age, 33.3 years) was retrospectively evaluated according to Fédération Dentaire Internationale (FDI) criteria. Dental history and photographic data were used to evaluate diastema closure (n = 199) and recontouring (n = 19) restorations comprising microhybrid (Essentia Universal, GC Corp.), nanohybrid (Ceram.x One, Dentsply Sirona), and nanofilled (Estelite Asteria, Tokuyama Dental) composites. Data were analyzed with the Kaplan-Meier log-rank test, Cox regression analysis, Pearson chi-square test. p < 0.05 was considered statistically significant. The overall survival rate was 90.3 % and the mean survival duration was 46.2 months during the for 4 - year study period. The annual failure rate was 0.9 % - 3.4 %. Mean survival durations for diastema closure and recontouring restorations were 46.2 and 45.9 months, respectively (p = 0.328). Mean survival durations for Essentia Universal, Estelite Asteria, and Ceram.x One were 46.1, 46.7, and 45.7 months, respectively (p = 0.677). If we include failed restorations that were repaired and remained functional, the overall survival rate was 100 %.

CONCLUSION

Longevity was similar among composites and restoration types. The long-term clinical performance of monochromatic anterior composite restorations was robust. Composite repair may be suitable for diastema closure and recontouring restorations.

CLINICAL SIGNIFICANCE

There is a lack of long-term clinical evidence regarding the performance of direct anterior composite restorations. Monochromatic direct composite restorations may meet both the esthetic and functional expectations with even simpler restorative techniques. This 4 - year follow-up study evaluated the clinical performance of monochromatic anterior diastema closure and recontouring restorations with three different composite materials. The longevity of the restorations and the reasons for failure were investigated.

Direct Composite Resin for the Management of Tooth Wear: A Systematic Review

BACKGROUND

This study systematically reviewed survival of direct composite to restore worn teeth.

MATERIALS AND METHODS

A comprehensive electronic search of databases sourced from Medline-PubMed, Embase, Cochrane Central, Scopus, Google scholar was performed on literature published between January 1990 and December 2018. Grey literature was also reviewed. Data extraction included sample size, number of composite restorations, operators, composite type, mean or total follow-up time and success rate expressed as either percent of successful restorations or median survival time (MST). Methodological quality was rated using the Joanna Briggs Institute appraisal checklist for case series. Studies on children, non-carious cervical lesions, cast and all-ceramic restorations, case reports and case series with <5 participants were excluded.

RESULTS

A total of 1563 studies were identified and 1472 were screened. Sixty-two full-text papers were assessed for eligibility which resulted in 10 studies that met inclusion criteria. These were mainly case series and assessed 3844 direct composite restorations placed in 373 patients mostly in hospital settings. Survival ranged from 50% to 99.3%. Methodological quality improved from the earlier studies and was rated low to moderate in 7 studies and good in 3. The funnel plot showed a low risk of publication bias but there was considerable heterogeneity (I²=97.7%). There was a non-significant weak negative association between age and survival (Spearman's rho=-0.12).

CONCLUSION

Qualitative evaluation of the studies proved difficult because of the nature of case series but reporting improved in the later studies. Despite the generally short duration of studies, small sample sizes in terms of patient numbers and composite restorations, the survival rates of direct hybrid composite resin in the short to medium term are acceptable and support their application for the restoration of worn teeth.

Facts and Fallacies About Restorative Philosophies for the Management of the Worn Dentition

This article addresses facts and fallacies about managing worn teeth and challenges some traditional concepts and beliefs about occlusion. Whilst it is accepted that many of the historic occlusal concepts were well intended, closer examination reveals that many were unnecessarily destructive of sound tooth tissues and did not deliver all of their purported benefits. Those fallacies make them less appropriate in the litigious environment of contemporary dental practice. This paper discusses the disadvantages of 'subtractive' dental procedures for the management of tooth wear, and highlights the benefits of proven minimally destructive 'additive' techniques.

Clinical guidance and an evidence-based approach for restoration of worn dentition by direct composite resin

This paper aims to provide the dentist with practical guidance on the technique for direct composite restoration of worn teeth. It is based on current evidence and includes practical advice regarding type of composite, enamel and dentine preparation, dentine bonding and stent design. The application of direct composite has the advantage of being additive, conserving as much of the remaining worn tooth as possible, ease of placement and adjustment, low maintenance and reversibility. A pragmatic approach to management is advocated, particularly as many of the cases are older patients with advanced wear. Several cases restored by direct composite build-ups illustrate what can be achieved. The restoration of the worn dentition may be challenging for many dentists. Careful planning and simple treatment strategies, however, can prove to be highly effective and rewarding. By keeping any intervention as simple as possible, problems with high maintenance are avoided and management of future failure is made easier. An additive rather than a subtractive treatment approach is more intuitive for worn down teeth. Traditional approaches of full-mouth rehabilitation with indirect cast or milled restorations may still have their place but complex treatment modalities will inevitably be more time consuming, more costly, possibly require specialist care and still have an unpredictable outcome. Composite resin restorations are a universal restorative material familiar to dentists from early-on in the undergraduate curriculum. This review paper discusses the application of composite to restore the worn dentition.

A guide to managing tooth wear: the Radboud philosophy

This paper explains a conservative, pragmatic and minimally invasive intervention concept for the treatment of severe tooth wear patients based on the Radboud Tooth Wear Project in the Netherlands. Guidelines and flowcharts for management of severe tooth wear patients and rehabilitation in increased vertical dimension of occlusion are presented. We concluded that: (a) Restorative treatment is not always indicated, even for patients with severe tooth wear. (b) If the patient has no complaints, counselling and monitoring is probably the best option. (c) Minimally invasive and adhesive restorative strategies are preferred when severe tooth wear patients are to be treated in increased vertical dimension, especially when young patients are involved. (d) Clinical evidence for a suitable restorative treatment protocol is limited to five-year follow up for direct composites. This material seems to be suitable for rehabilitation in increased vertical dimension on the middle long term. Clinical results for indirect techniques are not available yet. (e) Restorations, including those that are considered 'definitive' may prove to have a limited lifetime in patients with severe tooth wear due to bruxism and erosion. Explanation of the possible treatment options and expected complications should be included in the informed consent.

The influence of management of tooth wear on oral health-related quality of life

Objective

The purpose of this study was to identify the level of oral health-related quality of life and orofacial appearance in patients with moderate to severe tooth wear. Patients with and without a request for restorative treatment were included.

Methods

One hundred twenty-four patients (98 men, 26 women, mean age: 40.5 ± 8.8 years) with moderate to severe tooth wear were included. Patients without a request for help received a non-restorative treatment of counseling and monitoring. Patients with a request for restorative treatment were treated with a full rehabilitation using composite resin restorations. Oral Health Impact Profile (OHIP-NL) and Orofacial Esthetic Scale (OES-NL) questionnaires were filled in at baseline and after 1 year.

Results

Counseling and monitoring group: baseline OHIP-NL score was 0.4 ± 0.3, baseline summary score of OES-NL was 48 ± 7.0, and baseline impression score was 7.1 ± 1.2. Scores had not changed significantly after 1 year (p = 1.00 after Bonferroni correction).Restoration group: baseline OHIP-NL score was 0.8 ± 0.6, baseline summary score of OES-NL was 38 ± 10, and baseline impression score was 5.9 ± 1.5. Scores had improved significantly after 1 year (p < 0.001 after Bonferroni correction).

Conclusions

Counseling and monitoring did not result in a significant deterioration and restorative treatment resulted in a significant improvement of oral health-related quality of life (OHRQoL) and orofacial appearance in this patient group.

Clinical significance

In patients with moderate to severe tooth wear, without functional and esthetical problems, counseling and monitoring may be an appropriate treatment option. Restorative treatment in patients with a need for treatment results in an improved OHRQoL. OHIP and OES questionnaires may be used to monitor changes in clinically relevant symptoms.

Case Report: A Predictable Technique to Establish Occlusal Contact in Extensive Direct Composite Resin Restorations: The DSO-Technique

This paper describes the application technique of direct shaping by occlusion (DSO) for large composite restorations including the entire occlusal surface. For this technique, matrix bands and wedges are inserted without interference with antagonists in the desired occlusion. The final increment of soft-composite resin is shaped by letting the patient occlude on the uncured composite. Due to the nature of the technique, special care has to be taken for moisture control and handling of contamination. The procedure, advantages, and limitations of the technique are discussed.

Direct Placement Composite: the Treatment Modality of Choice to Restore the Worn or Eroded Dentition in Primary Dental Care

Tooth wear is increasing in severity and prevalence, partly because of an ageing population and partly because of modern lifestyles. Management of the worn dentition with 'full mouth rehabilitation' is outmoded. This clinical paper aims to review the literature on composite restorations and give general dental practitioners the confidence to restore the worn dentition with dental composite. Composite is a versatile and widely available material that can be successfully applied within the existing occlusal vertical dimension (OVD) or at an increased OVD using a Dahl approach. Cases illustrate what is achievable, and clinical tips will help dentists optimise their results.

Effect of placing intentionally high restorations: Randomized clinical trial

OBJECTIVE

The aim of this study was to examine the behavior of posterior teeth restored with single-tooth restorations with intentionally high occlusal contacts.

METHODS

Consent was obtained from 17 patients who were seen a total of 5 times over 3.5 years. The restorations placed were all full occlusal coverage gold restorations. Tooth mobility was recorded using the Periotest device and tooth movement was determined from impressions and 3D imaging. Patients were randomly assigned into two groups, the control group which received restorations with no intentional increase of the occlusal vertical dimension; or the treatment group where they received intentionally high restorations in 0.5mm supraocclusion.

RESULTS

Statistical analysis showed no significant difference in mobility between visits for both the control and the treatment groups while a significant dependency and difference in tooth movement was observed between the subjects of the two groups. Most patients from the treatment group reported discomfort but no pain for the first 7-10 days after the restoration was fitted, which subsided over a period of couple of weeks. At review, 3 years later, no mobility or additional movement was observed.

CONCLUSIONS

Cementation of an intentionally high single-tooth restoration causes no increase in tooth mobility while occlusal adaptation re-establishes and restores the occlusal plane.

Survival rates of anterior composites in managing tooth wear: systematic review

The use of composite restorations for patients with tooth wear is considered as a more conservative treatment option. The aim of this study was to systematically review the literature investigating the survival rates of anterior composite restorations when used in managing tooth wear in patients. PubMed and MEDLINE (Ovid) databases were screened for studies from 1995 to 2015. Cross-referencing was used to further identify articles. Article selection and data extraction were performed in duplication. Languages were restricted to English. A quality appraisal of included studies was carried out using the Strength of Recommendation Taxonomy system. Six hundred and sixty-six articles were initially identified from which eight articles were full-text reviewed. Six articles involving five studies were selected for inclusion. Three studies were prospective and two retrospective. Included studies involved placement of 772 direct and indirect anterior composite restorations in 100 patients with follow-up periods between 5 months and 10 years. The survival rates of anterior composites were >90% and 50% at 2.5 and 5 years, respectively. Posterior occlusion was re-established in 91% of patients within 18 months. Meta-analysis could not be performed due to the heterogeneity of included studies. The systematic review's overall strength of recommendation was graded B. There is evidence to support the use of anterior composite restorations at an increased vertical dimension of occlusion in the short/medium-term management of tooth wear. Long-term reporting of outcomes remains limited. Further research is needed with standardised study design, detailed reporting of outcomes and long-term review.

Impact of lateral occlusion schemes: A systematic review

STATEMENT OF PROBLEM

Although several lateral occlusion philosophies have been proposed in the literature, there is a lack of compelling evidence supporting any scheme.

PURPOSE

The purpose of this systematic review was to investigate the clinical implications of different lateral occlusion schemes.

MATERIAL AND METHODS

A literature search was completed through PubMed (MEDLINE), Google Scholar, and Cochrane Library, up to January 2014. The literature search aimed to retrieve 2 study categories: group 1: comparative studies; group 2: clinical outcome studies. The inclusion criteria were peer-reviewed human clinical studies published in English. The search was further supplemented by manual searching through the reference lists of the selected studies.

RESULTS

The initial search revealed a total of 680 studies; however, after applying the inclusion criteria, 26 studies were found suitable for the analysis (13 for group 1 and 13 for group 2). The most commonly evaluated lateral occlusion schemes were canine-guided occlusion (CGO) and group function occlusion (GFO). Group 1 studies evaluated the impact of lateral occlusion schemes on muscular electromyographic (EMG) activity, condylar displacement, mastication, and mandibular movement. Group 2 studies evaluated the impact of restored occlusion on longevity, patient comfort, and pathologic consequences. CGO was associated with narrower mastication and less EMG activity of the masticatory muscles during clenching. GFO was associated with wider mandibular movement and quicker mastication. During mastication, there was no difference in EMG activity between the 2 lateral occlusion schemes. Furthermore, the long-term studies indicated that there is no difference between the 2 schemes in patient comfort and restoration longevity.

CONCLUSION

Although there are immediate differences between the different lateral occlusion schemes, patients have the capability to successfully adapt to CGO or GFO.

Minimally invasive prosthetic procedures in the rehabilitation of a bulimic patient affected by dental erosion

The population affected by dental erosion due to bulimia is generally very young. This population group has a high aesthetic requirement; the dentition in these patients is severely damaged, especially in the anterior maxillary quadrant. In terms of treatment, it is still controversial whether an adhesive rehabilitation is preferable to a longer-lasting but more aggressive conventional treatment, such as full-crown coverage of the majority of teeth. This case report describes the prosthetic rehabilitation of a young female patient previously affected by bulimia nervosa and presenting erosion of the maxillary teeth. The prosthetic rehabilitation was performed through indirect adhesive restorations of the anterior teeth and direct restorations of the posterior teeth. A clinical follow-up after 4 years showed that the occlusion remained satisfactorily restored. Posterior direct composite resin restorations and anterior indirect adhesive composite restorations proved to be an effective time and money-saving procedure to rehabilitate patients affected by dental erosion. Adhesive rehabilitation provides a functional and good aesthetic result while preserving tooth structure.

Key words:Bulimia, dental erosion, composite resin, veneers.

Conservative Restoration of Worn Mandibular Anterior Teeth Combining Gingival Repositioning and a Template Matricing Technique

Conservative resin composite restoration of worn mandibular anterior teeth may offer an alternative option to full-coverage restorations for the patient. Assessment of the occlusal condition is critical because alterations in occlusal vertical dimension may not always be possible. By exposing additional coronal tooth structure, periodontal crown-lengthening procedures can serve to increase clinical crown height when adequate attached gingival tissue is present and supra-eruption has likely occurred. Fabrication of a custom template made from a diagnostic mock-up with proximal stainless steel matrices helps contribute to a predictable restorative result and improves chairside efficiency for the dental practice. By combining gingival crown lengthening, bonding of resin composite material, and selective occlusal adjustment; a short to medium-term, conservative option can be made available for the patient.

Direct adhesive pin-retained restorations for severely worn dentition treatment: a 1.5-year follow-up report

Excessive occlusal surface wear can result in occlusal disharmony, functional and esthetic impairment. As a therapeutic approach, conventional single crowns have been proposed, but this kind of treatment is complex, highly invasive and expensive. This case report describes the clinical outcomes of an alternative minimally invasive treatment based on direct adhesive-pin retained restorations. A 64-year-old woman with severely worn dentition, eating problems related to missing teeth and generalized tooth hypersensitivity was referred for treatment. Proper treatment planning based on the diagnostic wax-up simulation was used to guide the reconstruction of maxillary anterior teeth with direct composite resin over self-threading dentin pins. As the mandibular remaining teeth were extremely worn, a tooth-supported overdenture was installed. A stabilization splint was also used to protect the restorations. This treatment was a less expensive alternative to full-mouth rehabilitation with positive esthetic and functional outcomes after 1.5 years of follow-up.

Interactive treatment planning in toothwear: are we doing it right?

Toothwear is now common, especially in younger patients, with high demand for the restoration of the damaged teeth which is likely to increase further over time. Fixed prosthodontic options range from direct composite resin to conventional tooth preparation and cemented indirect restorations. This paper summarizes the views of a variety of clinicians on a plan delivered to a patient with toothwear in secondary care and explores the possible reasons for the variation in decision-making in the treatment of toothwear.

CLINICAL RELEVANCE

With levels of toothwear increasing, the clinician needs to be aware of the different treatment modalities which are appropriate.

Information for patients undergoing treatment for toothwear with resin composite restorations placed at an increased occlusal vertical dimension

Toothwear is affecting increasing numbers of the population. In the past, treatment of patients whose teeth were affected by toothwear often involved the reduction of these teeth for crowns; a severe form of toothwear. Contemporary management of such cases is by the bonding of resin composite restorations to the worn and wearing surfaces, with these restorations being placed at an increased occlusal vertical dimension. The advantage of the technique is its minimal- or non-intervention nature and its high reported degree of patient satisfaction. There are, however, short-term disadvantages to the technique, such as the potential for lisping, pain from the teeth which will be subject to axial orthodontic tooth movement, and difficulty in chewing on the posterior teeth if these are discluded. It is therefore important, as with any treatment, that the advantages and disadvantages are fully explained to the patient. This paper therefore describes the clinical technique and presents a Patient Information Leaflet that the author has used for over five years.

CLINICAL RELEVANCE

Patients should be advised regarding the disadvantages and advantages of any technique.

Nanoparticle release from dental composites

Dental composites typically contain high amounts (up to 60 vol.%) of nanosized filler particles. There is a current concern that dental personnel (and patients) may inhale nanosized dust particles (<100 nm) during abrasive procedures to shape, finish or remove restorations but, so far, whether airborne nanoparticles are released has never been investigated. In this study, composite dust was analyzed in real work conditions. Exposure measurements of dust in a dental clinic revealed high peak concentrations of nanoparticles in the breathing zone of both dentist and patient, especially during aesthetic treatments or treatments of worn teeth with composite build-ups. Further laboratory assessment confirmed that all tested composites released very high concentrations of airborne particles in the nanorange (>10(6)cm(-3)). The median diameter of airborne composite dust varied between 38 and 70 nm. Electron microscopic and energy dispersive X-ray analysis confirmed that the airborne particles originated from the composite, and revealed that the dust particles consisted of filler particles or resin or both. Though composite dust exhibited no significant oxidative reactivity, more toxicological research is needed. To conclude, on manipulation with the bur, dental composites release high concentrations of nanoparticles that may enter deeply into the lungs.

Contemporary management of generalized erosive tooth surface loss

Management of generalized erosive tooth surface loss can be challenging. Careful pre-operative assessment of the patient and treatment planning is essential. The aim of any treatment provided is to prevent further tooth surface loss, restore aesthetics and function, and provide a stable occlusal relationship. Whilst attempting to fulfil these goals, it is important to protect the remaining tooth structure by using restorations which are conservative and do not cause further damage to teeth which are already compromised. This paper aims to describe a conservative approach to restoring patients with generalized tooth surface loss.

CLINICAL RELEVANCE

To highlight conservative treatment options available for the management of generalized erosive tooth surface loss and show how they contrast with other destructive irreversible conventional techniques.

Marginal adaptation of direct class II composite restorations with different cavity liners

The aim of this study was to evaluate how cavity linings with different elastic modulus can influence the marginal adaptation (MA) of Class II composite restorations before and after thermo-mechanical loading.

MATERIALS AND METHODS

Forty Class II cavities with margins extending 1 mm below the cement-enamel junction were prepared in extracted human third molars. In each group except the control group, a lining material of 1-mm thickness was applied to the bottom of the cavity and polymerized before placing the resin composite Herculite XRV Ultra (group A: control; group B: Premise Flowable lining; group C: Herculite XRV Ultra lining; and group D: Optibond FL lining). MA was evaluated (with a scanning electron microscope) before and after loading (200,000 loading cycles). Statistical analysis was done using the Shapiro-Wilks test, the analysis of variance test, and Duncan post hoc test at p<0.05.

RESULTS

Before loading, the percentages of continuous margins in dentin were superior (p<0.05) for groups C and D (71.1% and 87.2%, respectively) compared to groups A and B (55.7% and 48.3%, respectively). After loading, group D (79.8%) was statistically superior in dentin compared to all of the other groups (43.6%, 35.9%, and 54.4%, respectively). In occlusal enamel, no significant difference was found between groups. The percentage of enamel fractures and the percentage of noncontinuous margins in proximal enamel were high, with no significant difference between liners. It can be concluded that for the materials used in this study, a 1-mm-thick lining with an extremely low elastic modulus (2-3 GPa) could redistribute shrinkage stress. The use of a flowable composite did not significantly improve MA.

The management of anterior tooth wear using gold palatal veneers in canine guidance

Localised anterior tooth wear can be managed using minimally invasive techniques with conservation of tooth structure and preservation of pulp vitality. This article describes and illustrates with two clinical cases, the management of localised tooth wear, with the restoration of canine guidance by a combination of gold palatal veneers and direct composite restorations.

Direct restorative treatment of anterior weared teeth after re-establishment of occlusal vertical dimension: a case report

OBJECTIVE

The loss of posterior teeth resulting in a lack of stability may lead to excessive mandibular load on some points of occlusion of the remaining teeth, causing wear. The rehabilitation of these cases must be carefully planned and the treatment requires a period of adaptation with a new vertical dimension.

BACKGROUND

This case report describes the treatment of a patient with a loss of almost all posterior inferior teeth and a consequential loss of occlusal vertical dimension and accentuated wear of anterior elements.

MATERIALS AND METHODS

  Provisional removable partial dentures were manufactured and the patient used them for a period of adaptation prior to restoration of the anterior teeth. After the patient's adaptation with the new occlusal dimension, anterior restorations were made using a mycrohibrid resin composite with different color aspects for an optimal stratification.

RESULTS

The restorations achieved an aesthetic configuration with ideal function as the final result and the occlusion showed a satisfactory stability for a provisional removable partial dentures.

CONCLUSION

This article presents an anterior direct rehabilitation approach not only as an alternative option, but also as viable and less expensive treatment option with an optimally aesthetic and functional result.

Clinical considerations for increasing occlusal vertical dimension: a review

The purpose of this article is to discuss the clinical considerations related to increasing the occlusal vertical dimension (OVD) when restoring a patient's dentition. Thorough extraoral and intraoral evaluations are mandatory to assess the suitability of increasing OVD. In the literature, multiple techniques have been proposed to quantify OVD loss. However, the techniques lack consistency and reliability, which in turn affects the decision of whether to increase the OVD. Therefore, increasing OVD should be determined on the basis of the dental restorative needs and aesthetic demands. In general, a minimal increase in OVD should be applied, though a 5 mm maximum increase in OVD can be justified to provide adequate occlusal space for the restorative material and to improve anterior teeth aesthetics. The literature reflects the safety of increasing the OVD permanently, and although signs and symptoms may develop, these are usually of an interim nature. Whenever indicated, the increase in OVD should be achieved with fixed restorations rather than a removable appliance, due to the predictable patient adaptation. The exception to this is for patients with TMD, where increasing the OVD should still be achieved using removable appliances to control TMD-associated symptoms before considering any form of irreversible procedure.

A composite approach to the management of worn maxillary first molar teeth

A lady with extrinsic acid erosion was referred to the restorative department at Bristol Dental Hospital by her General Dental Practitioner (GDP) for restoration of worn maxillary first molar teeth. These teeth were both causing symptoms of dentinal sensitivity and two attempts had been made to restore them with composite by her GDP. The restorations failed because there was insufficient space to bond the composite in place, which was due to dento-alveolar compensation of the first molars into the space created by the wear. Following relevant preventive advice, the maxillary first molar teeth were restored with 'high' direct composite resin, which allowed for adequate strength in bulk for retention while acting as fixed intrusion devices. These cured the patient's sensitivity and within four months her occlusion compensated for the composites and had re-established.