Dental occlusion: a critical reflection on past, present and future concepts

Automatic adjustment of dental crowns using Laplacian mesh editing

Currently, the restoration of missing teeth by means of dental implants is a common treatment method in dentistry. Ensuring optimal contact between teeth (occlusion) when designing the occlusal surface of an implant-supported crown is crucial for the patient. Although there are various occlusal concepts and guidelines for achieving optimised occlusion, adapting an occlusal surface is challenging. The contact points must be established in certain areas of the occlusal surface without impairing the aesthetics of the teeth and the masticatory function. A computer-aided, automated modelling approach can assist in the design process and can reduce the reliance on manual labour. This study aimed to develop a modelling approach that enables the automatic adaptation of an occlusal surface to specific occlusal concepts while preserving the natural appearance. In this study, the occlusal surface of an implant-supported crown based on a scanned first right mandibular molar was adopted. Nominal contact points were determined based on occlusal concepts by Ramfjord and Ash (RA) and Thomas (T). The shape of the occlusal surface was then adapted concerning the desired contact points using Laplacian mesh editing. The modification results were validated for different forces and crown materials (3Y-TZP and PMMA) using a finite element contact analysis. The contact analysis results showed that locations with high compressive stresses correspond with the locations of the nominal contact points. The reaction forces were more evenly distributed in PMMA crowns, due to the lower Young's modulus of PMMA compared to 3Y-TZP. Furthermore, the occlusal scheme with fewer contact points (RA) showed higher maximum reaction forces per contact area. The presented method enables the automated adaptation of an (implant-supported) crown to specific occlusal schemes, proving to be valuable in dental CAD.

Reliability of the digital functionally generated path technique for assessing occlusal interferences and adjusting CAD-CAM zirconia crowns: an in vivo study

BACKGROUND

Designing the occlusal surface of a prosthesis to ensure optimal eccentric occlusion is challenging without precisely replicating the patient's mandibular movements. During the CAD-CAM prosthesis delivery process, clinicians often need to make adjustments to the prosthesis to avoid occlusal interferences that may occur during lateral excursions. Recently, there have been developments in the field of mandibular motion tracking using optical devices. These approaches seek to incorporate an individual's functional movement into the research field of occlusal morphology.

AIM

This study aimed to assess the accuracy of digitally replicating mandibular movements to identify and correct occlusal interferences in monolithic CAD-CAM zirconia crowns.

METHODS

An intraoral scanner (IOS) was used to capture complete arch maxillary and mandibular teeth and record buccal and lateral interocclusal records of maxillary first premolar abutment teeth of thirteen participants. For each patient, two monolithic zirconia crowns were fabricated following the standard digital workflow. The crowns were categorized based on the virtual method used for adjusting occlusal interferences into two groups: Group I, where occlusal interferences in CAD-CAM zirconia crowns were adjusted using buccal interocclusal records, and Group II, where adjustments were made using both buccal and lateral interocclusal records. After crown fabrication following the manufacturer's instructions, occlusion was analyzed using an electronic pressure analyzer. The mean, standard deviation and median values of the recorded data were measured. Paired t test and Wilcoxon Sign Rank test were executed for analyzing differences between groups (p value ≤ 0.05).

RESULTS

Group I recorded higher maximum pressure at lateral mandibular movement with mean ± standard deviation value of 26.00 ± 4.95% than Group II with 20.62 ± 3.38%. Regarding pressure recorded at maximum intercuspation (MI) Group I showed higher results; 8.08 ± 1.50% compared to Group II with 7.23 ± 1.59% mean ± standard deviation value. The average value of crown volume for Group I was (160.36 ± 15.94) mm3, while for Group II was (157.63 ± 14.45) mm3.

CONCLUSIONS

The digital functionally generated path technique allows for identifying occlusal interferences and modifying CAD-CAM zirconia crown designs.

Digital Condylar Parameter Assessment Using Cadiax® 2 and Modjaw®

Background: The main aim of this research was to assess the reliability of two systems designed specifically for condylar movement recording using condylar slope and Bennett angle information. The objectives were to evaluate the validity of two subsequent null hypotheses: (1) there is no significant difference between the measurements of condylar slope and Bennett angle taken at T0 (initial) and T1 (after one week) using the same equipment; (2) there is no notable difference in the values of the condylar slope and Bennett angle measurements obtained using Modjaw and Cadiax 2. Methods: An observational, descriptive, and prospective study was conducted with a selected group of 25 individuals (13 females and 12 males) aged between 22 and 27. Results: The results of Cadiax 2 and Modjaw showed excellent measurement repeatability for both parameters, with intraclass correlation coefficients (ICC) above 0.90, indicating excellent reliability between T0 and T1, both at 3 mm and 5 mm of displacement. Modjaw had an overall average value relatively higher than Cadiax 2, even though Modjaw's condylar slope at 5mm had a significantly lower average value (37.4 ± 6.31) with an interval of 24.5-48.1, which was lower than Cadiax 2 (48.4 ± 10.6) with an interval of 30.5-68.5. Regarding the primary aim, it can be stated that both Modjaw and Cadiax 2 demonstrated excellent repeatability on their own, demonstrating robust reliability since there was no discernible difference between the T0 and T1 measurements. On the contrary, analyses of the two devices' measured values for the secondary aim showed a considerable difference. Conclusions: Even though each device is reliable on its own, the absolute values that are obtained are different. Technological differences between the systems may account for these variations.

Impact of Stabilization Splint Therapy on Orthodontic Diagnosis in Patients with Signs and Symptoms of Temporomandibular Disorder

BACKGROUND/OBJECTIVES

The relation between the orthopedic temporomandibular joint (TMJ) instability and temporomandibular disorder (TMD) most commonly remain unrecognized by orthodontists. In this study we aimed to evaluate the dentofacial characteristics and temporomandibular disorder symptomatology of patients with orthopedic instability before and after deprogramming with a stabilization splint.

METHODS

Sixty patients with the signs and symptoms of TMD were assessed using the Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD) and underwent stabilization splint therapy to place the condyles in a more stable musculoskeletal position. The extent of condylar displacement was evaluated using the condylar position indicator (CPI). Sixteen angular and linear hard tissue landmarks were traced and compared from lateral cephalograms taken in the maximum intercuspation (MI) position before, and in the centric relation (CR) position after, the splint therapy.

RESULTS

Following the splint therapy, the signs and symptoms of TMD were significantly reduced or completely eliminated in more than 90% of patients. Compared with the values registered before the splint therapy, a significant reduction in the mean values of condylar displacement was observed on both sides of the vertical (p < 0.001), horizontal (p < 0.05), and transverse (p < 0.001) planes of space after the splint therapy. A comparison of pre- and post-splint lateral cephalograms revealed that, following the splint therapy, the mandible moved more posteriorly and rotated in a more clockwise direction.

CONCLUSIONS

In patients with orthopedic instability and the signs and symptoms of TMD, muscle deprogramming with a stabilization splint therapy is highly recommended to improve the health of the temporomandibular joint and masticatory structures and contribute to a more correct orthodontic diagnosis.

Myths surrounding vertical dimension of occlusion in restorative dentistry: A scoping review

OBJECTIVE

This scoping review aims to clarify the concept of vertical dimension of occlusion (VDO) in prosthetic dentistry, addressing prevalent myths, and controversies regarding its clinical management and impact on the stomatognathic system.

METHODS

This paper critically examines common beliefs about VDO alteration and its effects on temporomandibular disorders (TMD) through an extensive literature review and an international survey. The survey included 862 general dentists and prosthodontists and explored their approaches to altering VDO and their perceptions of the clinical implications. The literature review provided a thorough analysis of existing research on VDO modification techniques, the adaptability of the stomatognathic system, and the relationship between VDO changes and TMD.

RESULTS

The survey revealed insights into dentists' perspectives on VDO, showing that while many practitioners test a new VDO due to concerns about patient adaptation, a significant majority observed that patients typically adjust well to a new VDO regardless of the technique used. The survey highlighted differing beliefs about the need for a gradual process and trial phase for VDO alteration, as well as the stability of modified VDO. Literature review suggests the stability and adaptability of VDO changes due to muscle adaptability and indicates no direct causal or curative link between VDO changes and TMD. Traditional methods for determining VDO in complete dentures may not be suitable for worn dentition, underscoring the need for tailored approaches.

CONCLUSION

This paper suggests that the traditional belief in the need for a prolonged trial phase for VDO alterations may be reconsidered in light of evidence supporting the adaptability of the stomatognathic system. Moreover, it emphasizes the importance of distinguishing between methods suitable for complete dentures and those for managing cases of worn dentition. The purported link between VDO alterations and TMD is also found to lack scientific evidence, highlighting the need for individualized patient care based on current evidence and clinical judgment.

Comparison of the morphological accuracy of automatic crowns designed by multiple computer-aided design software programs with different levels of dentition information acquisition

STATEMENT OF PROBLEM

Information on the morphological accuracy of crowns automatically produced by different computer-aided design (CAD) software programs for multilevel dentition defects is limited.

PURPOSE

The purpose of this in vitro study was to compare the morphological accuracy of crowns fabricated using different CAD software programs with different design theories for multilevel dentition defects.

MATERIAL AND METHODS

Four dentition defect types (the standard group, the abrasion group, the adjacent-teeth-missing group, and the antagonist-tooth-missing group, n=10) were fabricated to represent different levels of missing dentition information. Two design modes (the library mode and correlation mode) of 3 common CAD software programs (3Shape [3Shape A/S], CEREC [Dentsply Sirona], and exocad DentalCAD [exocad GmbH]) were used to design crowns automatically, and the morphologies of the generated crowns and original teeth were recorded. The root mean square (RMS) value was calculated to evaluate the morphological deviations between the autogenerated crowns and original teeth using the 3D matching system (Geomagic GmbH). As each group in this study represented 3 factors, the mean differences between the treatment combinations and the interaction effects were analyzed by performing factorial analysis of variance (α=.05).

RESULTS

The RMS values of autogenerated crowns designed using the correlation method were significantly lower than those designed using the library method of each software program in the 4 groups (P<.05). The RMS values of crowns designed by the 3Shape and CEREC software programs in library mode under conditions with dentition information loss were lower than those of crowns designed by the exocad software program (P<.05). Changes in the acquisition of dental information did not decrease the CEREC design accuracy (P>.05), while they did decrease the 3Shape and exocad design accuracy (P<.05).

CONCLUSIONS

The correlation method showed higher accuracy in rebuilding the original morphology of the teeth than the library method. Both the 3Shape and CEREC software programs showed higher accuracy than the exocad software program in library mode under conditions with dentition information loss, while CEREC showed higher stability than the 3Shape and exocad software programs.

Time of day-dependent deviations in dynamic and static occlusion: A prospective clinical study

STATEMENT OF PROBLEM

The registration of dental occlusion is essential for prosthodontic treatment. However, studies on time-dependent changes of static and dynamic occlusion that may affect definitive restorations are lacking.

PURPOSE

The purpose of this prospective clinical study was to use conventional and digital occlusal registration techniques to evaluate time-dependent fluctuations in static and dynamic occlusion.

MATERIAL AND METHODS

The static and dynamic occlusion of 19 healthy individuals (14 women and 5 men with a mean ±standard deviation age of 30.8 ±4.8 years) was examined 3 times a day using occlusal foil (12-μm occlusion foil) and a digital sensor (T-Scan III). The procedure was repeated after 14 days. The statistical analysis covered all registrations referencing the first measurement point to assess occurring differences, and changes per tooth and arch were determined (α=.05). Potential influencing factors were calculated by using mixed logistic regression. Marginal probabilities were calculated considering the registration technique and the time of measurement.

RESULTS

Significant differences were found between registered occlusal patterns and the different registration techniques. Occlusal changes per maxillary dental arch were observed with static foil registration (P<.001; 98.8%), left laterotrusion foil registration (P=.001; 29.6%), right laterotrusion foil registration (P=.001; 29.6%), static sensor registration (P<.001; 20.3%), left laterotrusion sensor registration (P=.001; 71.7%), and right laterotrusion sensor registration (P=.005; 67.7%). None of the techniques showed higher probabilities of occlusal changes at a given time of day with respect to time-dependent changes.

CONCLUSIONS

The study revealed that occlusion cannot be considered constant and that the topography and intensity of the contact points vary. Circadian occlusion variance can be assumed without preferring a specific time of the day. This differentiated view of occlusion as a changing system helps to clarify the challenge of dental restorations for both the patient and the practitioner.

Reference values and reliability of occlusal force distribution and occlusal time measured by the T-Scan system in adults with healthy dentition

PURPOSE

Reference values of occlusal characteristics are needed to interpret the data obtained using the T-Scan System. This study aimed to establish reference values for and to assess the reliability of, occlusal force distribution in the maximal intercuspal position and the occlusion time in young adults with healthy dentition.

MATERIALS AND METHODS

In total 178 adults with natural dentition participated in this retrospective cross-sectional study, of whom 76 performed a retest session. Several occlusal recordings were obtained from each participant using the T-Scan system while asking them to bite two or three consecutive times (multi-bite) or only once (single-bite) at the maximal intercuspal position. The lateral and anteroposterior occlusal force distribution were determined as percentages in the right and posterior teeth . Occlusion time was measured in seconds. After the occlusal force distribution and occlusion time percentiles were calculated, reliability was assessed by the intraclass correlation coefficient.

RESULTS

The 5th-95th percentiles for occlusal force distribution were 34%-67% on the right teeth and 55%-94% on the posterior teeth. The 90th percentile for multi-bite occlusion time was 0.17 s and for single-bite occlusion time was 0.27 s. The intraclass correlation coefficients for lateral occlusal force distribution, anteroposterior occlusal force distribution, multi-bite occlusion time, and single-bite occlusion time were 0.70, 0.68, 0.58, and 0.67, respectively.

CONCLUSIONS

This study generated reference values for key occlusal characteristics (occlusal force distribution and occlusion time) when using the T-Scan system. These values showed moderate reliability.

Occlusal Features and Temporomandibular Joint Disorder: A Cross-Sectional Study

Background

Understanding the correlation between temporomandibular joint disorder (TMD) parameters and various occlusal features can play a significant role in diagnosing and treating occlusal problems and their potential consequences on TMD.

Objectives

To investigate the relationship of occlusal features and some of the TMD parameters. Study Design and Sampling. The current cross-sectional study was conducted on 200 TMD patients seeking dental treatment at different dental centers in Baghdad city, aged 18-35 years. All participants underwent assessment for occlusal features, which were molar and canine classifications, overjet, posterior buccal or lingual crossbites, and overbites, and TMD parameters (muscle pain, TMJ pain, and clicking) using the Chi-square test for statistical analysis.

Results

Regarding molar classification, there were strong positive correlations between subjects with TMD and having different molar classifications (class I, II, and III) bilaterally or unilaterally; furthermore, there were strong positive correlations between subjects with TMD and having different canine classifications. Moreover, there were significant correlations between subjects with increased, normal, or decreased overjet and the TMD parameters. In addition, there were weak positive correlations between TMD occurrence and buccal or lingual posterior crossbite. On the other hand, there were significant correlations between subjects with a decreased overbite and the presence of TMD parameters.

Conclusion

TMD had a multifactorial background rather than dependability on a specific molar or canine classification type. There was also a correlation between overjet and TMD muscle pain, while decreased overbite was correlated to muscle and TMJ pain. Conversely, there is no vital correlation between posterior buccal or lingual crossbite occurrence and TMD parameters.

How to register static occlusion - Correlation of contemporary techniques

Statement of problem

A working knowledge of the analytical capacities of contemporary registration methods is essential for prosthetic treatment; however, there is a paucity of studies which coherently investigate the capabilities and limitations of the various diagnostic procedures utilized for prosthetic occlusion.

Purpose

The present prospective clinical study aimed to evaluate the similarities and differences among contemporary registration methods through comparative analysis.

Material and methods

The habitual static occlusion of 19 healthy individuals (14 women; mean age ± standard deviation, 30.8 ± 4.8 years) was analyzed 3 times a day, using shimstock foil, occlusal foil, wax registration, silicone registration, and computerized registration. The procedures were repeated after 14 days. Statistical analyses included all registrations referencing the first measurement point to assess the mean values of antagonistic contacts and the differences between these measurements. Pearson's and Kendall's correlation analyses were performed as part of the coherent mixed logistic regression model, and marginal probabilities were calculated using the registration technique and repeated measurements.

Results

Strong correlations were found among the various registration techniques. The largest effect sizes were observed among the wax, silicone, occlusion foil, and computerized registrations (r = 0.95, P < 0.001 to r = 0.62, P < 0.001), while the lowest effect sizes were found for shimstock correlations (τ = 0.41, P < 0.001 to τ = 0.27, P < 0.001). Occlusal changes per maxillary arch were observed referencing the first measurement time with wax registration (P < 0.001; 7.4%), shimstock foil (P < 0.001; 13.8%), computerized registration (P < 0.001; 20.3%), silicone registration (P = 0.009; 66.3%), and occlusion foil (P < 0.001; 98.8%). Occlusal changes per maxillary tooth were observed from the first incisor (P < 0.001; 5.7%) to the third molar (P < 0.001; 18.1%).

Conclusions

The results of the present study revealed that there are strong overall correlations among the various contemporary registration techniques. The different affinities of the techniques used to register occlusal changes, however, showed differences in the measurement techniques, which should be neither over- nor underestimated. The differential tendencies of teeth to change should be considered, even if a hypervariable system is assumed.

Prevalence of dental midline shifting among 7- to 15-year-old children in Babylon/Iraq

OBJECTIVE

This study aimed to determine the prevalence of dental midline shifting in a group of children with mixed dentition aged 7-15 years in Babylon/Iraq and assess the association between different variables including gender, age stages, residency, and Angle's classes of malocclusions with midline shifting.

MATERIALS AND METHOD

A total of 300 dentate children aged 7-15 years (119 males and 131 females) were randomly chosen from children who visited the Department of Orthodontics, Pedodontics, and Prevention at the College of Dentistry/University of Babylon. The participants were from various environmental areas (162 urban and 88 rural area subjects). The dental midline shifting evaluation includes verifying the maxillary and mandibular dental midline positions with respect to the facial midline, taking philtrum as a guide. Statistical Package for the Social Sciences (SPSS) version 20.0 for Windows was used for data analyses using Pearson's Chi-square tests. The significance level was set at P < 0.05.

RESULTS

More than half of the total sample had dental midline shifting (55.66%), which was relatively more prevalent in the mandible than in the maxilla. The prevalence of dental midline shifting was more common in females (31.3%), subjects over the age of 12 years (20%), and subjects from urban areas (37%). The midline deviation was more frequent in Angle's class I (34%) and class II (13%) malocclusion than in Angle's class III malocclusion (9%) with statistically significant differences (P = 0.028). 63.47% of the sample had midline shifts of 2 mm or more.

CONCLUSIONS

About half of the studied sample showed a maxillary-mandibular dental midline shift. The dental midline shift is more commonly noticed in females and children over 12 years old. A statistically significant difference was found between the shift of the dental midline and Angle's classes of malocclusions, with class I having the greatest midline shift.

Temporomandibular Disorders: Implications in Restorative Dentistry and Orthodontics

Over the past several decades, the science of restorative/reconstructive dentistry and orthodontics has evolved tremendously, following sound principles passed down from robust literature and scientific rationale. These principles have been solid and instrumental in enhancing dentistry, from a single tooth restoration to complex full-mouth rehabilitations. However, it must be noted that some of the principles and philosophies followed over these decades have been questioned based on the advances in science, technology, and evidence-based medicine. The scenario became complex when clinicians were faced with the question of guidance for optimum joint and muscle health as related to restorative dentistry and orthodontics.

Temporomandibular Disorders and Dental Occlusion: What Do We Know so Far?

Throughout the recorded history in the literature of temporomandibular disorders (TMD) there have been a variety of opinions as to its primary cause. Those supporting an occlusal basis of TMD opined that occlusal dysfunction is either the primary cause for or a significant etiopathogenic factor in the causation of TMD. Most of the current literature, however, points to evidence in another direction and questions the causal role of occlusion and occlusal disharmony in TMD etiopathogenesis. Recognition of this evidence-based literature is paramount in eliminating and preventing the chances of overtreatment of patients with TMD.

Positional influence of center of masticatory forces on occlusal contact forces using a digital occlusal analyzer

STATEMENT OF PROBLEM

Digital occlusal analyzers allow the recording of dental contact forces. Some authors assume a unique location for the center of contact forces at the position of maximum intercuspation, while others indicate variations in dental contact forces when recorded at different times of the day. Which approach is more appropriate is unclear.

PURPOSE

The purpose of this in vitro study was to analyze whether a change in the balance of masticatory forces influences the location of the center of contact forces and its magnitude.

MATERIAL AND METHODS

Three different dental casts, selected under dental criteria, were mounted in maximum intercuspation on a semiadjustable articulator equipped with a pattern indicating 9 different force application points (intersection point between 3 longitudinal rows and 3 transverse columns). A force of constant magnitude (169 N) was applied 10 times at each of the application points, and occlusal forces were recorded with a digital occlusal analyzer. Then, two variables were studied: the location of the center of contact forces and its magnitude. Each force application position (9 positions × 3 dental casts=27 in total) was repeated 10 times, and measured data were statistically analyzed with 2-way repeated measures ANOVA (α=.05) test.

RESULTS

The repeatability of the method indicated that the coefficient of variation mean was 0.37% in the location of the center of contact forces and that its magnitude was 3.70%. The 2-way repeated measures ANOVA test revealed statistically significant variations in the location of the center of contact forces and its magnitude, revealing that longitudinal changes of the application point of masticatory forces affected the magnitude of contact forces and that longitudinal and transverse changes of the application point of masticatory forces affected the location of the center of contact forces.

CONCLUSIONS

The location of the center of contact force and its magnitude provided by a digital occlusal analyzer at the position of maximum intercuspation are not necessarily unique to each articulated dental cast. Even if the intensity of the masticatory force remains unchanged, changes in its lateral or longitudinal balance also influence the result of the occlusion forces.

Morphology and mechanical performance of dental crown designed by 3D-DCGAN

OBJECTIVES

This study utilised an Artificial Intelligence (AI) method, namely 3D-Deep Convolutional Generative Adversarial Network (3D-DCGAN), which is one of the true 3D machine learning methods, as an automatic algorithm to design a dental crown.

METHODS

Six hundred sets of digital casts containing mandibular second premolars and their adjacent and antagonist teeth obtained from healthy personnel were machine-learned using 3D-DCGAN. Additional 12 sets of data were used as the test dataset, whereas the natural second premolars in the test dataset were compared with the designs in (1) 3D-DCGAN, (2) CEREC Biogeneric, and (3) CAD for morphological parameters of 3D similarity, cusp angle, occlusal contact point number and area, and in silico fatigue simulations with finite element (FE) using lithium disilicate material.

RESULTS

The 3D-DCGAN design and natural teeth had the lowest discrepancy in morphology compared with the other groups (root mean square value = 0.3611). The Biogeneric design showed a significantly (p < 0.05) higher cusp angle (67.11°) than that of the 3D-DCGAN design (49.43°) and natural tooth (54.05°). No significant difference was observed in the number and area of occlusal contact points among the four groups. FE analysis showed that the 3D-DCGAN design had the best match to the natural tooth regarding the stress distribution in the crown. The 3D-DCGAN design was subjected to 26.73 MPa and the natural tooth was subjected to 23.97 MPa stress at the central fossa area under physiological occlusal force (300 N); the two groups showed similar fatigue lifetimes (F-N curve) under simulated cyclic loading of 100-400 N. Designs with Biogeneric or technician would yield respectively higher or lower fatigue lifetime than natural teeth.

SIGNIFICANCE

This study demonstrated that 3D-DCGAN could be utilised to design personalised dental crowns with high accuracy that can mimic both the morphology and biomechanics of natural teeth.

Enamel Wear of Antagonist Tooth Caused by Dental Ceramics: Systematic Review and Meta-Analysis

BACKGROUND

This systematic review and meta-analysis aimed to evaluate the wear of the antagonist tooth in ceramic restorations.

MATERIAL AND METHODS

This study was carried out based on Preferred Reporting Items for Systematic Review and Meta-analysis (PRISMA) recommendations; it was also registered in PROSPERO (register number: CRD42022316252). Three databases were consulted in the literature search, Embase, Scopus, and Web of Science. The citation searching was conducted by two researchers independently. The clinical studies that evaluated wear in antagonist teeth concerning ceramic restoration were included. Twelve articles were selected after eliminating duplicates ones and applying the inclusion criteria, and two were chosen through citation. Fourteen articles were considered for the qualitative and quantitative analysis (meta-regression and meta-analysis).

RESULTS

The mean linear wear of the antagonist tooth in relation to feldspathic was 8.914 μm, for lithium disilicate it was 0.018 μm, and for zirconia it was 0.257 μm. The mean volumetric wear of the antagonist tooth in relation to feldspathic was 0.273 mm3, for hybrid ceramic it was 0.030 mm3, for lithium disilicate it was 0.018 mm3, and for zirconia it was 0.014 mm3. The mean natural tooth wear was 0.7974 μm per month. Tooth wear caused by zirconia at six months was 31.755 μm, at 12 months it was 24.648 μm, and at 24 months it was 20.662 μm.

CONCLUSIONS

Feldspathic produces greater wear of the antagonist tooth from ceramic restorations linearly and volumetrically. In addition, zirconia generates the least wear that will decrease over time, and it will be equal to or less than the natural wear in the tooth.

Temporomandibular joint shape in anthropoid primates varies widely and is patterned by size and phylogeny

The temporomandibular joint is the direct interface between the mandible and the cranium and is critical for transmitting joint reaction forces and determining mandibular range of motion. As a consequence, understanding variation in the morphology of this joint and how it relates to other aspects of craniofacial form is important for better understanding masticatory function. Here, we present a detailed three-dimensional (3D) geometric morphometric analysis of the cranial component of this joint, the glenoid fossa, across a sample of 17 anthropoid primates, and we evaluate covariation between the glenoid and the cranium and mandible. We find high levels of intraspecific variation in glenoid shape that is likely linked to sexual dimorphism and joint remodeling, and we identify differences in mean glenoid shape across taxonomic groups and in relation to size. Analyses of covariation reveal strong relationships between glenoid shape and a variety of aspects of cranial and mandibular form. Our findings suggest that intraspecific variation in glenoid shape in primates could further be reflective of high levels of functional flexibility in the masticatory apparatus, as has also been suggested for primate jaw kinematics and muscle activation patterns. Conversely, interspecific differences likely reflect larger scale differences between species in body size and/or masticatory function. Results of the covariation analyses dovetail with those examining covariation in the cranium of canids and may be indicative of larger patterns across mammals.

Dental Students' Didactic and Psychomotor Skills Performance in Dental Anatomy and Preclinical Operative Dentistry Courses in a Saudi Governmental School

Background

Knowledge and psychomotor skills are essential in dental education. The aims were to (1) investigate the correlation between dental students' didactic and psychomotor skills performance in the dental anatomy and preclinical operative dentistry courses and (2) explore the impact of gender on students' performance in both courses.

Materials and Methods

A retrospective cohort study was performed on dental students' (164 students; 72 males and 92 females) dental anatomy and preclinical operative courses scores of the same class over 2 years (2018–2020). Didactic and practical scores were collected. The didactic scores included examinations. Practical scores included tooth wax carving for the dental anatomy course and class II cavity preparations and restorations for the preclinical operative. Student's t-test and ANOVA were used to analyze the difference between the didactic and psychomotor skills scores of both courses and genders. Pearson's correlation coefficient was used to explore correlations (p < 0.05).

Results

Moderate, positive, and significant correlations were found between didactic scores in both courses and between dental anatomy's didactic and psychomotor skills. A weak, positive, and significant correlation existed between the preclinical operative didactic and psychomotor silks (p < 0.05). Females' didactic performance was significantly better than males. Gender had a significant, positive, and moderate correlation in the dental anatomy course, but moderate-weak in preclinical operative (p < 0.05).

Conclusion

Students' didactic and psychomotor performance correlations in dental anatomy and preclinical operative courses were positive. The correlation was moderate and weak and varied by course. Gender had a significant impact on student performance and varied by procedure and courses investigated.

Effect of occlusal anatomy of CAD/CAM feldspathic posterior crowns in the stress concentration and fracture load

OBJECTIVES

This study evaluated the effect of restoration occlusal design on the maximum fracture load and stress distribution of a feldspathic ceramic crown.

MATERIALS AND METHODS

Twenty dentin analogues were used to simulate a full-crown preparation. Next, 20 feldspathic crowns were milled according to the occlusal design parameter available in the CAD database (Young or Adult). The crowns were cemented with dual cure resin-cement and loaded until fracture at 1 mm/min crosshead speed. Data were analyzed by using one-way ANOVA and Tukey tests (p < 0.05). The same geometry and experimental setup was modeled and exported to the computer aided engineering software and tensile stress concentration was calculated using the finite element method with 300 N occlusal load simulation.

RESULTS

The occlusal anatomy significantly influenced the load-to-fracture (p < 0.05). Adult design showed higher mean values (1149 ± 201 N) than Young design (454 ± 77 N). The maximum principal stress criteria showed similar stress pattern for both designs, however, the highest stress concentration was calculated for Young design (91 MPa) in the occlusal surface.

CONCLUSIONS

An anatomy design with reduced cusp angulation and less evident occlusal sulcus can reduce the stress concentration and increase the fracture load for feldspathic CAD/CAM posterior crowns.

A comparative study on the influence of third point of reference on condylar guidance settings in a semi-adjustable articulator with lateral cephalographs: An in-vivo study

Aim

The study aimed to evaluate the effect on condylar guidance values with casts mounted by facebow transfer (Guichet's point as the third point of reference), Bonwill's, and radiographic method.

Materials and Methods

The dentulous subject's casts were mounted to a semi-adjustable articulator (Artex Type AR) after facebow transfer with Guichet's point as the third point of reference and also by Bonwill's method. Protrusive records made earlier were utilized to program the right and left side condylar guidance value. Two digital lateral cephalograms were made, one in centric relation, and one in protrusion and the condyles were traced and overlapped. The condylar guidance readings obtained by Bonwill's method, facebow transfer, and lateral cephalometric tracings were compared in this study using the SPSS (Version 17.0 Illinois, Chicago, USA) software.

Results

The condylar guidance values obtained from Bonwill's and the facebow transfer method (p < 0.001) was lesser than the radiographic method. The values obtained by casts mounted to the Bonwill's method differed significantly (p < 0.001) from the other two methods.

Conclusion

The values obtained by facebow transfer were closer to the radiographic values whereas the values obtained by Bonwill's method mounting differed markedly.

Comparison of two different digital occlusal analysis methods

OBJECTIVES

The aim of this study is to compare the sensitivity of T-Scan digital occlusal analysis system and the occlusal analysis mode of the CEREC Omnicam system, which is mainly used for design/production, using the data recorded at the maximum intercuspal position.

MATERIALS AND METHODS

Occlusal recordings were obtained from healthy 20 females and 20 males aged 18-25 at the maximum intercuspal position. Records were saved as.jpeg format and transferred to Adobe Photoshop CS6 program. Blue, green, and red colors (shown by the same color codes in both systems) representing light, intense, and tight contacts, respectively, were evaluated in terms of the pixel counts. For statistical comparison, the differences between the systems independent sample T test and, between the genders, one sample T test were used (α = 0.05).

RESULTS

The total numbers of pixels of all colors which are evaluated with T-Scan and CEREC Omnicam in females were 31,296.6 and 15,745, respectively, and in males 39,812.3 and 17,462, respectively. In both systems, the blue contact area is the most seen. For all colors tested, T-Scan recorded more contact than those of CEREC Omnicam in both genders and statistically significant difference was found between two systems for all colors. In both systems, recorded contacts are significantly higher in men than in women. Compared with women, 27% more contact area was recorded in men with T-Scan and 11% more with CEREC Omnicam was obtained.

CONCLUSIONS

While T-Scan was found sensitive even in the diagnosis of light contacts, the CEREC Omnicam was found sensitive only in the diagnosis of tight contacts.

CLINICAL RELEVANCE

Although both T-Scan and CEREC Omnicam are effective in occlusal analysis, T-Scan's sensitivity was found to be higher.

TRIAL REGISTRATION

ClinicalTrials.gov identifier: NCT04798729.

Comparison between Occlusal Errors of Single Posterior Crowns Adjusted Using Patient Specific Motion or Conventional Methods

Recently, digital technology has been used in dentistry to enhance accuracy and to reduce operative time. Due to advances in digital technology, the integration of individual mandibular motion into the mapping of the occlusal surface is being attempted. The Patient Specific Motion (PSM) is one such method. However, it is not clear whether the occlusal design that is adjusted using PSM could clinically show reduced occlusal error compared to conventional methods based on static occlusion. In this clinical comparative study including fifteen patients with a single posterior zirconia crown treatment, the occlusal surface after a clinical adjustment was compared to no adjustment (NA; design based on static occlusion), PSM (adjusted using PSM), and adjustment using a semi-adjustable articulator (SA) for the assessment of occlusal error. The root mean square (RMS; μm), average deviation value (±AVG; μm), and proportion inside the tolerance (in Tol; %) were calculated using the entire, subdivided occlusal surface and the out of tolerance area. Using a one-way ANOVA, the RMS and +AVG from the out of tolerance area showed a statistical difference between PSM (202.3 ± 39.8 for RMS, 173.1 ± 31.3 for +AVG) and NA (257.0 ± 73.9 for RMS, 210.9 ± 48.6 for +AVG). For the entire and subdivided occlusal surfaces, there were no significant differences. In the color-coded map analysis, PSM demonstrated a reduced occlusal error compared to NA. In conclusion, adjustment occlusal design using PSM is a simple and effective method for reducing occlusal errors that are difficult to identify in a current computer-aided design (CAD) workflow with static occlusion.

The Effect of Residual Dentition on the Dynamic Adjustment of Wear Facet Morphology on a Mandibular First Molar Crown

PURPOSE

To evaluate the effect of different residual dentitions on the dynamic adjustment of wear facet morphology on a single mandibular first molar crown with a virtual articulator.

MATERIALS AND METHODS

Gypsum casts (N = 12) of natural full dentitions were mounted on an articulator and scanned. The mandibular right first molar (#46) was prepared and a copy of the tooth before it was prepared and used to design the crown. The wear facets on the original #46 were selected and elevated by 0.3 mm in the occlusal direction to generate high points. The #46 with high points was segmented to create a digital wax pattern. Then different teeth were virtually removed to generate 4 types of residual dentitions: Type I (no teeth), Type II (adjacent teeth), Type III (ipsilateral posterior teeth and canine), and Type IV (all teeth). The crowns were adjusted dynamically with different residual teeth to guide mandibular movement of the virtual articulator. Three-dimensional deviations, negative and positive volumes between crowns and wear facets on the original #46 were analyzed. The Kruskal-Wallis test was used to analyze the results.

RESULTS

The mean deviation values and positive volumes decreased with the decrease in residual teeth, and the negative volumes showed an opposite trend. The mean deviation values, root mean square, and positive volumes were not significantly different. The negative volume of the crowns of Type I was different from that of Type IV (p = 0.031).

CONCLUSIONS

Residual dentition affects the dynamic adjustment of wear facet morphology. When there are insufficient residual teeth, mandibular movements should be accurately measured.

Automatic Digital Design of the Occlusal Anatomy of Monolithic Zirconia Crowns Compared to Dental Technicians' Digital Waxing: A Controlled Clinical Trial

PURPOSE

Reconstructing the occlusal morphology of posterior teeth in definitive dental prosthesis can be challenging. The use of the correlation technique enables replication of the information and occlusal anatomy of interim dental prostheses to the definitive ones. The purpose of this controlled clinical trial was to compare the static and dynamic contacts (SDC) of monolithic zirconia crowns designed with correlation and library techniques.

MATERIAL AND METHODS

Twenty-four patients were included in the study for a total of 28 molars. For each abutment tooth, an interim crown was fabricated and two digital scans, with and without the interim crown in place were made. Two single crowns were designed using correlation and library techniques. Fifty-six monolithic zirconia crowns were milled. The interim and definitive crowns were evaluated intraorally for SDC by using a 24-μm-thick blue articulating foil. After removing the interim and definite crowns, extraoral photographs were taken to calculate the SDC area using software (ImageJ) and analyzed by the Kruskal-Wallis test.

RESULTS

The average and ± standard deviation (SD) of area of the occlusal marks on interim crowns was 32.27 ± 3.45 mm² . Definitive crowns designed by using the correlation technique had an area of 31.01 ± 3.73 mm² ; the area in the library technique was 36.85 ± 5.78 mm² . No statistically significant difference was found (p = 0.091) between the occlusal mark areas of the interim and definitive crowns designed by using the correlation technique. Whereas, there were significant differences between the areas of occlusal marks of the interim and definitive crowns designed by using the library technique, and between the areas of occlusal marks of definitive crowns designed by using the correlation and library techniques (p < 0.001).

CONCLUSION

The average area of the SDC of monolithic zirconia crowns designed by using the correlation technique was similar to that of interim crowns. The library technique was less effective when replicating the SDC compared to the correlation technique.

3D Technology Development and Dental Education: What Topics Are Best Suited for 3D Learning Resources?

The aim of this study is to identify topics (knowledge and skills) from the dental curricula that would benefit from having a 3D learning resource using an exploratory sequential design method. The first phase targeted stakeholders from a Scottish dental school. Seven focus groups and three interviews disclosed 97 suitable topics for 3D technology development. These results were used to construct a survey that was sent to final year dental students, newly dental graduates and academics from three Scottish universities. The survey asked participants to rank each item based on the perceived benefit that a 3D learning resource would have for dental education. Results revealed that detailed anatomy of the temporomandibular joint, dental anaesthesiology, dental clinical skills techniques, dental occlusion and mandibular functioning were top priorities. Gender differences only appeared in relation to ‘Extraction techniques: movements and force’ (p < 0.05), this topic was considered to be more beneficial by females than by males. No statistical difference was found when comparing results of graduates with undergraduates. These results serve as a starting point when developing a new 3D technology tool for dental education, considering users demands and perceived needs has the potential to benefit dental students and dental education directly.

Occlusal and Esthetic Enhancement: A Noninvasive Approach to an Old Dilemma

This article describes an indirect composite restoration technique for diastema closure and tooth lengthening with a noninvasive approach using regularly available materials such as silicone, composite resin, and an adhesive system. The procedure resulted in occlusal and functional improvement, with diastema closure, protrusive guide adjustment, and an increase in central incisor length. The procedure provided an adequate proportion of the central incisors with an esthetically natural appearance. It also resulted in simple, fast, and accurate manufacturing with a noninvasive esthetic indirect rehabilitation compared with more invasive preparation of ceramic veneers.

The evolution of temporomandibular disorders: A shift from experience to evidence

After over 80 years of much obsession as well as avoidance of the subject of temporomandibular disorders (TMDs), the dental profession is still divided over what they are and how to deal with them. Over this period, nearly every discipline in dentistry has played some role in the development of this field. Unfortunately, a significant amount of this information has been based on personal opinion, experience-based philosophies, or poorly conducted research. Furthermore, each dental specialty has been responsible for contributing to the concepts of the etiology and management of TMDs with their own professional bias; for example, orthodontists describe these problems in orthodontic terms and offer orthodontic treatments or solutions for their patients. As various treatment approaches were found to be effective at least some of the time, this has further led to misinformation and confusion within the profession. Advances in research from diverse fields, including neurophysiology, pain pathophysiology, genetics, endocrinology, behavioral sciences, and psychology, have significantly altered our understanding of TMDs and how they should be managed. The rigid mechanical and dental-based model of the past has been gradually replaced by a biopsychosocial medical model for the diagnosis and treatment of TMDs as well as other acute and chronic pain disorders. This paper discusses the evolution of our understanding of TMDs since they were first described 85 years ago. Contemporary scientific findings and their implications are presented in some detail for clinicians who wish to provide the appropriate management for their orofacial pain patients.

Comparison and evaluation of the morphology of crowns generated by biogeneric design technique with CEREC chairside system

Objectives

To better guide clinicians to choose the appropriate chairside system, we compared and evaluated the morphology of crowns generated by three different biogeneric design modes (biogeneric copy (BC), biogeneric individual (BI), and biogeneric reference (BR)) of the CEREC software.

Methods

Maxillary and mandibular casts were obtained from twelve volunteers and digital impressions were acquired. All ceramic crown preparations of all right maxillary central incisors were prepared and digital impressions were taken. Then, crowns were automatically designed under BC, BI and BR modes separately and their morphologies were evaluated by six doctors. The “optimal fitting alignment” and “3D analysis” functions of the Geomagic Qualify software were carried out between original teeth and auto-generated full crowns. The auto-generated crowns were modified by a technician according to clinical criteria and the adjustment time was recorded. The discrepancies between technician modified crowns and the auto-generated full crowns were evaluated with the same functions in the Geomagic Qualify software.

Results

The subjective evaluation results of BC group were significantly better than those of BI and BR group (p < 0.05). Compared with the original teeth and modified crowns, auto-generated crowns in BC group all had the smallest differences, followed by BR and BI group (p < 0.05). BC group needed the shortest adjustment time than BI and BR group (p < 0.05).

Conclusions

Using crowns generated by BC mode is more aesthetic and suitable in clinics use than those generated by BI and BR modes and can reduce clinic adjustment time.

Prevalence of temporomandibular disorders in patients seeking orthodontic treatment: A systematic review

The objective of this systematic review was (a) to establish the prevalence of temporomandibular disorders (TMDs) in patients seeking orthodontic treatment and (b) to determine the association between the presence of TMD and sex, age and malocclusion. A systematic literature search was performed according to PRISMA guidelines from 1969 to 2019 using the PubMed and LIVIVO databases. Eight study articles met the inclusion and exclusion criteria. An additional three contributions were identified through manual searching of the reference lists of retrieved articles. The methodological quality of the 11 articles was assessed with the Joanna Briggs Institute Critical Appraisal Checklist for prevalence studies. TMD prevalence ranged from 21.1% to 73.3%. The frequency of painful TMD signs/symptoms varied from 3.4% to 65.7%, while non-painful signs/symptoms ranged from 3.1% to 40.8%. The percentage of males and females presenting with TMD varied from 10.6% to 68.1% and 21.2 to 72.4%, respectively. In all studies, TMD prevalence was higher among females. The majority of articles reported more TMD signs/symptoms in individuals older than 18 years as compared to younger ones (≤18 years). While in four studies no association between TMD and malocclusion was found, another three investigations indicated that TMD may be related to certain occlusal traits. The TMD prevalence in patients seeking orthodontic treatment was high, with many individuals presenting painful TMD signs/symptoms. Female and older patients appear to have a greater occurrence of TMD. Although no strong association between TMD and malocclusion was established, several occlusal traits were implicated.

Clinical performance of occlusal onlays made of lithium disilicate ceramic in patients with severe tooth wear up to 11 years

OBJECTIVES

Evaluation of survival and complication rate of monolithic occlusal onlays made of lithium disilicate ceramic used in patients with severe tooth wear up to 11years of clinical service.

METHODS

In a prospective non-randomized clinical study 7 patients (4 male, 3 female; median age: 44.3±6.56years old) were restored full mouth with a total of 103 adhesively bonded occlusal onlays made of lithium disilicate ceramic (IPS e.max Press, Ivoclar Vivadent, Schaan, Liechtenstein). All restorations were examined during annual recall visits using periodontal parameters according to the modified United States Public Health Service (USPHS) criteria: (a) marginal discoloration, (b) secondary caries, (c) marginal integrity, (d) surface texture, (e) restoration fracture, and (f) occlusal wear, rating with Alpha, Bravo and Charlie over an observation period up to 11years (68-139 months; median: 94.9±26.1 months). Data was statistically analyzed using the Kaplan-Meier estimation.

RESULTS

Monolithic lithium disilicate occlusal onlays presented a 100% survival rate. Four restorations within one patient (3.9%) presented marginal discoloration, one after 60 and three after 108 months (all rated Bravo). One restoration (1%) showed a marginal crack formation (technical complication) after 120 months, rated Bravo. No biological complication, debonding or secondary caries could be found and tested periodontal parameters showed excellent results.

SIGNIFICANCE

Based on the analyzed data up to 11years, monolithic occlusal onlays made of lithium disilicate ceramic can be considered as a reliable treatment option for full-mouth rehabilitations in patients with severe tooth wear.

A technique for verifying the accuracy of the virtual mounting of digital scans against the actual occlusal contacts

The digital scans of dentate arches can be mounted from a virtual interocclusal record to expedite the fabrication of dental prostheses. However, the virtual mounting may develop an occlusal error when combined with less than ideally scanned data and an algorithm that matches poorly. This article describes a method of verifying the accuracy of virtual mounting against the actual occlusal contacts marked with colored articulating paper.

Optimizing quality of dental carving by preclinical dental students through anatomy theory reinforcement

Knowledge of dental anatomy is of great importance in the practice of dentistry, especially in oral rehabilitation, because without this knowledge, professional practice is not possible. Dental carving plays a major role in training dental students as it develops their manual dexterity. This randomized controlled trial aimed to evaluate the influence of didactic-theoretical reinforcement on the theoretical and practical knowledge of dental anatomy of preclinical students by examining the quality of the anatomical restorations performed by these students before and after a didactic-theoretical reinforcement. For the evaluation of theoretical knowledge, a questionnaire with closed questions about dental anatomy was used. To evaluate the effect of didactic reinforcement on dental carvings, two groups of 15 preclinical students were assessed. Experimental group (G1) received a three-hour theoretical tutoring on dental anatomy, while the control group (G2) did not. The dental carving scores obtained by the two different groups were compared using Student's t-test. Cohen's d was used to estimate the effect sizes between groups. The frequency of correct answers given for each theoretical knowledge question was compared in each group using Fisher's exact test. T-test was also used to compare the means of the two groups' final scores of theoretical evaluations. To compare these final scores obtained in both carving and theoretical tests, a principal component analysis was performed with different items assessed in each test to obtain factor loading scores and a final weighted score, where factor loadings were considered for each item. Weighted scores were compared using t-test. Also, scores obtained during the head and neck course were assessed and compared using t-test. Spearman's correlation test was used to assess the correlation between scores obtained prior to the anatomy course and scores obtained in the dental carving exercise. The theoretical evaluation revealed no significant difference between the grades (mean ± SD) of G1 (85.1 ± 6.6%) and G2 (86.2 ± 9.1%) with the grades of a baseline test that was previously obtained when students submitted to the study (P = 0.725). Regarding the tooth carving assessment, the dental carving quality by students of G1 has significantly improved, except for tooth #23 (P = 0.096). Theoretical reinforcement of dental anatomy seems to improve the students' carving performance but does not enhance their knowledge about dental anatomy. Anat Sci Educ 11: 377-384. © 2017 American Association of Anatomists.

Temporomandibular disorders in growing patients after treatment of class II and III malocclusion with orthopaedic appliances: a systematic review

OBJECTIVE

To determine if the use of orthopaedic appliances in growing patients applied to correct Class II and III malocclusion is related to the development of temporomandibular disorders (TMD).

MATERIAL AND METHODS

A systematic review was conducted between 1960 and July 2017, based on electronic databases: PubMed, Cochrane Library, Embase, Medline, Scopus, EBSCOhost, Scielo, Lilacs and Bireme. Controlled clinical trials (CCTs) and randomized controlled trials (RCTs) were identified. The articles were selected and analyzed by two authors independently. The quality of the evidence was determined according to the guidelines of the Cochrane Risk Bias Assessment Tool and the Cochrane Quality Study Guide.

RESULTS

Seven articles were included, four CCTs and three RCTs. The studies were grouped according to malocclusion treatment in (a) class II appliances (n = 4) and (b) class III appliances (n = 3). The quality of evidence was low due to the high risk of bias, independent of the association reported. All studies concluded that the use of orthopaedic appliances would not contribute to the development of TMD.

CONCLUSIONS

The quality of evidence available is insufficient to establish definitive conclusions, since the studies were very heterogeneous and presented a high risk of bias. However, it is suggested that the use of orthopaedic appliances to correct class II and III malocclusion in growing patients would not be considered as a risk factor for the development of TMD. High-quality RCTs are required to draw any definitive conclusions.

Non-orthodontic intervention and non-nutritive sucking behaviours: A literature review

Anterior open bite (AOB) is one of the most complex malocclusions to manage. AOB is caused by either by skeletal, genetic or environmental factors. Numerous treatment options are currently utilised to manage AOB. These vary from non-invasive behavioural shaping to orthodontic and surgical interventions. This paper reviews the available orthodontic and non-orthodontic interventions used in the management of AOB. The literature review was carried out using the PubMed search engine from the first of January 2000 to the first of June 2017. Two major keywords (open bite and anterior open bite) were used in addition to 23 minor keywords in the review. AOB is one of the most complex malocclusions to treat with high relapse rates. Long term outcome in treatments of patients with AOB was substantially low. Relapse rates were not taken into consideration for some of the literature reviewed. Despite limitations of the literature, it is recommended that orofacial myofunctional therapy (OMT) and non-orthodontic intervention (NOI) be used in conjunction as an effective treatment option for Anterior Open Bite.

Evaluation of signs, symptoms, and occlusal factors among patients with temporomandibular disorders according to Helkimo index

Objective: This study sought to assess the clinical signs and subjective symptoms of TMD, including the occlusal condition. Methods: Recruited individuals included 123 patients (58 men, 65 women) aged 15 to 65 years (mean 38.6 years) who had been referred to the TMD department. Helkimo dysfunction, occlusal, and anamnestic indices were used to assess signs of TMD, occlusal condition, and symptoms, respectively. Relationships of occlusal factors with signs and symptoms of TMD were evaluated by Spearman's correlation test. Associations of TMD with sex and age distributions were assessed by Mann-Whitney and Spearman's test, respectively. Results: The prevalence of signs and symptoms was as high as 75%. Occlusal factors had significant associations with signs and symptoms of TMD. Conclusion: Prevalence of TMD in the study population was high, without preference for age or sex. Occlusal factors may play a role in the etiology of TMD.

The mechanics of dental occlusion and disclusion

BACKGROUND

The mechanical environment associated with occluding teeth is the foundation for a wide range of research topics, clinical practice and dogma, product development and marketing, and medico-legal issues. The purpose of this study was to experimentally examine the relationships between occlusal factors and their impact on the associated contact forces.

METHODS

Matching pairs of 0°, 20°, 33° and 40° cusp first molar denture teeth were placed into Class I, II and III molar relationships. As the teeth were brought together into occlusion and then separated, the loads experienced by the mandibular tooth were continuously measured by a load cell that was supporting it.

FINDINGS

Loess smoothing splines were fitted to all data curves to calculate 95% confidence intervals. All lateral force magnitudes and directions were statistically different when compared between classes of occlusion, cusp angles, and occlusion vs. disclusion. Noteworthy counterintuitive observations were that the lateral contact force components were generally higher during disclusion than occlusion, the peak lateral force magnitudes did not always occur when the occlusal force was maximum, and the lateral contact force component magnitude can be larger than the occlusal force.

INTERPRETATION

Wedging and friction account for these unexpected results. The data indicate that each occlusion/disclusion cycle is characterized by complex transient loads that may impact wear facet and non-carious cervical lesion formation, implant and restorative failures, various aspects of occlusal trauma, and the concept of axial occlusal loading.

Centric relation-intercuspal position discrepancy and its relationship with temporomandibular disorders. A systematic review

OBJECTIVE

The objective of this study is to assess the relationship between centric relation-intercuspal position discrepancy (CR-ICP discrepancy) and temporomandibular disorders (TMDs), by systematically reviewing the literature.

MATERIALS AND METHODS

A systematic research was performed between 1960 and 2016 based on electronic databases: PubMed, Cochrane Library, Medline, Embase, Scopus, EBSCOhost, BIREME, Lilacs and Scielo, including all languages. Analytical observational clinical studies were identified. Two independent authors selected the articles. PICO format was used to analyze the studies. The Newcastle-Ottawa Scale (NOS) was used to verify the quality of the evidence.

RESULTS

Four hundred and sixty-seven potentially eligible articles were identified. Twenty studies were analyzed, being grouped according to intervention in studies in orthodontic patients (n = 3) and studies in subjects without intervention (n = 17). Quality of evidence was low, with an average score of 3.36 according to Newcastle-Ottawa Scale. In most studies, the presence of CR-ICP discrepancy is associated with the presence of muscle (pain) and joint disorders (noise, disc displacement, pain, crepitus, osteoarthritis and osteoarthrosis). However, the lack of consistency of the results reported reduces the validity of the studies making it impossible to draw any definite conclusions.

CONCLUSIONS

Because of the heterogeneity of the design and methodology and the low quality of the articles reviewed, it is not possible to establish an association between CR-ICP discrepancy and TMD. The consequence of CR-ICP discrepancy on the presence of TMD requires further research, well-defined and validated diagnostic criteria and rigorous scientific methodologies. Longitudinal studies are needed to identify CR-ICP discrepancy as a possible risk factor for the presence of TMD.

The effect of direct and indirect force transmission on peri-implant bone stress - a contact finite element analysis

In almost all finite element (FE) studies in dentistry, virtual forces are applied directly to dentures. The purpose of this study was to develop a FE model with non-linear contact simulation using an antagonist as force transmitter and to compare this with a similar model that uses direct force transmission. Furthermore, five contact situations were created in order to examine their influence on the peri-implant bone stresses, which are relevant to the survival rate of implants. It was found that the peri-implant bone stresses were strongly influenced by the kind of force transmission and contact number.

Dental Angle class asymmetry and temporomandibular disorders

OBJECTIVES

The aim of this study was to determine whether there is an association between the presence of asymmetric molar or canine Angle classes on the two sides and the presence of temporomandibular joint dysfunction (TMD).

MATERIALS AND METHODS

Participants to the study were divided into two groups: TMD group (90 patients) or a control group (58 patients). In the TMD group, clinical assessment for TMD was performed according to the Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD) guidelines by the same two trained examiners. In both groups, all subjects underwent an assessment of dental occlusion, focusing on the assessment of bilateral canine and molar Angle class relationship. The study protocol was reviewed and approved by the Institutional Review Board of the University of Padova, and each participant gave written consent to take part in the investigation.

RESULTS

TMJ pain was diagnosed in 58, disk displacement in 96, arthrosis in 17, and muscle pain in 46 individuals. Molar Angle class was symmetrical in 86 individuals and asymmetrical in 62 subjects. Molar Angle class was not correlated with any of the TMD diagnoses. Canine Angle class was correlated with TMJ arthrosis. Correlation values with the other TMD diagnoses were low and were not significant.

CONCLUSIONS

It can be suggested that an association between dental Angle class asymmetry and TMDs does not exist and that the role of dental asymmetries as a factor correlated with the presence of TMD signs and symptoms is minimal.