The N-terminal region of an endoglucanase from Pseudomonas fluorescens subspecies cellulosa constitutes a cellulose-binding domain that is distinct from the catalytic centre

Glucomannan and beta-glucan degradation by Mytilus edulis Cel45A: Crystal structure and activity comparison with GH45 subfamily A, B and C

The enzymatic hydrolysis of barley beta-glucan, konjac glucomannan and carboxymethyl cellulose by a β-1,4-D-endoglucanase MeCel45A from blue mussel, Mytilus edulis, which belongs to subfamily B of glycoside hydrolase family 45 (GH45), was compared with GH45 members of subfamilies A (Humicola insolens HiCel45A), B (Trichoderma reesei TrCel45A) and C (Phanerochaete chrysosporium PcCel45A). Furthermore, the crystal structure of MeCel45A is reported. Initial rates and hydrolysis yields were determined by reducing sugar assays and product formation was characterized using NMR spectroscopy. The subfamily B and C enzymes exhibited mannanase activity, whereas the subfamily A member was uniquely able to produce monomeric glucose. All enzymes were confirmed to be inverting glycoside hydrolases. MeCel45A appears to be cold adapted by evolution, as it maintained 70% activity on cellohexaose at 4 °C relative to 30 °C, compared to 35% for TrCel45A. Both enzymes produced cellobiose and cellotetraose from cellohexaose, but TrCel45A additionally produced cellotriose.

Functional diversity of three tandem C-terminal carbohydrate-binding modules of a β-mannanase

Carbohydrate active enzymes, such as those involved in plant cell wall and storage polysaccharide biosynthesis and deconstruction, often contain repeating noncatalytic carbohydrate-binding modules (CBMs) to compensate for low-affinity binding typical of protein–carbohydrate interactions. The bacterium Saccharophagus degradans produces an endo-β-mannanase of glycoside hydrolase family 5 subfamily 8 with three phylogenetically distinct family 10 CBMs located C-terminally from the catalytic domain (SdGH5_8-CBM10x3). However, the functional roles and cooperativity of these CBM domains in polysaccharide binding are not clear. To learn more, we studied the full-length enzyme, three stepwise CBM family 10 (CBM10) truncations, and GFP fusions of the individual CBM10s and all three domains together by pull-down assays, affinity gel electrophoresis, and activity assays. Only the C-terminal CBM10-3 was found to bind strongly to microcrystalline cellulose (dissociation constant, K_d = 1.48 μM). CBM10-3 and CBM10-2 bound galactomannan with similar affinity (K_d = 0.2–0.4 mg/ml), but CBM10-1 had 20-fold lower affinity for this substrate. CBM10 truncations barely affected specific activity on carob galactomannan and konjac glucomannan. Full-length SdGH5_8-CBM10x3 was twofold more active on the highly galactose-decorated viscous guar gum galactomannan and crystalline ivory nut mannan at high enzyme concentrations, but the specific activity was fourfold to ninefold reduced at low enzyme and substrate concentrations compared with the enzyme lacking CBM10-2 and CBM10-3. Comparison of activity and binding data for the different enzyme forms indicates unproductive and productive polysaccharide binding to occur. We conclude that the C-terminal-most CBM10-3 secures firm binding, with contribution from CBM10-2, which with CBM10-1 also provides spatial flexibility.

Stability and Ligand Promiscuity of Type A Carbohydrate-binding Modules Are Illustrated by the Structure of Spirochaeta thermophila StCBM64C

Deconstruction of cellulose, the most abundant plant cell wall polysaccharide, requires the cooperative activity of a large repertoire of microbial enzymes. Modular cellulases contain non-catalytic type A carbohydrate-binding modules (CBMs) that specifically bind to the crystalline regions of cellulose, thus promoting enzyme efficacy through proximity and targeting effects. Although type A CBMs play a critical role in cellulose recycling, their mechanism of action remains poorly understood. Here we produced a library of recombinant CBMs representative of the known diversity of type A modules. The binding properties of 40 CBMs, in fusion with an N-terminal GFP domain, revealed that type A CBMs possess the ability to recognize different crystalline forms of cellulose and chitin over a wide range of temperatures, pH levels, and ionic strengths. A Spirochaeta thermophila CBM64, in particular, displayed plasticity in its capacity to bind both crystalline and soluble carbohydrates under a wide range of extreme conditions. The structure of S. thermophila StCBM64C revealed an untwisted, flat, carbohydrate-binding interface comprising the side chains of four tryptophan residues in a co-planar linear arrangement. Significantly, two highly conserved asparagine side chains, each one located between two tryptophan residues, are critical to insoluble and soluble glucan recognition but not to bind xyloglucan. Thus, CBM64 compact structure and its extended and versatile ligand interacting platform illustrate how type A CBMs target their appended plant cell wall-degrading enzymes to a diversity of recalcitrant carbohydrates under a wide range of environmental conditions.

Metatranscriptomics Reveals the Active Bacterial and Eukaryotic Fibrolytic Communities in the Rumen of Dairy Cow Fed a Mixed Diet

Ruminants have a unique ability to derive energy from the degradation of plant polysaccharides through the activity of the rumen microbiota. Although this process is well studied in vitro, knowledge gaps remain regarding the relative contribution of the microbiota members and enzymes in vivo. The present study used RNA-sequencing to reveal both the expression of genes encoding carbohydrate-active enzymes (CAZymes) by the rumen microbiota of a lactating dairy cow and the microorganisms forming the fiber-degrading community. Functional analysis identified 12,237 CAZymes, accounting for 1% of the transcripts. The CAZyme profile was dominated by families GH94 (cellobiose-phosphorylase), GH13 (amylase), GH43 and GH10 (hemicellulases), GH9 and GH48 (cellulases), PL11 (pectinase) as well as GH2 and GH3 (oligosaccharidases). Our data support the pivotal role of the most characterized fibrolytic bacteria (Prevotella, Ruminocccus and Fibrobacter), and highlight a substantial, although most probably underestimated, contribution of fungi and ciliate protozoa to polysaccharide degradation. Particularly these results may motivate further exploration of the role and the functions of protozoa in the rumen. Moreover, an important part of the fibrolytic bacterial community remains to be characterized since one third of the CAZyme transcripts originated from distantly related strains. These findings are used to highlight limitations of current metatranscriptomics approaches to understand the functional rumen microbial community and opportunities to circumvent them.

Polysaccharide degradation systems of the saprophytic bacterium Cellvibrio japonicus

Study of recalcitrant polysaccharide degradation by bacterial systems is critical for understanding biological processes such as global carbon cycling, nutritional contributions of the human gut microbiome, and the production of renewable fuels and chemicals. One bacterium that has a robust ability to degrade polysaccharides is the Gram-negative saprophyte Cellvibrio japonicus. A bacterium with a circuitous history, C. japonicus underwent several taxonomy changes from an initially described Pseudomonas sp. Most of the enzymes described in the pre-genomics era have also been renamed. This review aims to consolidate the biochemical, structural, and genetic data published on C. japonicus and its remarkable ability to degrade cellulose, xylan, and pectin substrates. Initially, C. japonicus carbohydrate-active enzymes were studied biochemically and structurally for their novel polysaccharide binding and degradation characteristics, while more recent systems biology approaches have begun to unravel the complex regulation required for lignocellulose degradation in an environmental context. Also included is a discussion for the future of C. japonicus as a model system, with emphasis on current areas unexplored in terms of polysaccharide degradation and emerging directions for C. japonicus in both environmental and biotechnological applications.

A novel bifunctional endo-/exo-type cellulase from an anaerobic ruminal bacterium

An anaerobic microorganism termed AN-C16-KBRB was isolated from the bovine rumen and demonstrated cellulolytic activity on a NB agar plate containing azo-carboxymethyl cellulose. The 16S rRNA gene of the strain was 98% similar to that of Clostridiaceae bacterium SK082 (AB298754) as the highest homology. A novel celEdx16 gene encoding a bifunctional endo-/exocellulase (CelEdx16) was cloned by the shotgun method from AN-C16-KBRB, and the enzyme was characterized. The celEdx16 gene had an open reading frame of 1,104-base pairs, which encoded 367 amino acids to yield a protein of molecular mass 40.4 kDa. The amino acid sequence was 53% identical to that of an endoglucanase from Clostridium thermocellum. CelEdx16 was overexpressed in Escherichia coli and purified using Ni-NTA affinity chromatography. The specific endocellulase and exocellulase activities of CelEdx16 were 15.9 and 3.6 x 10⁻² U mg⁻¹, respectively. The Michaelis-Menten constant (K (m) values) and the maximal reaction velocities (V(max) values) of CelEdx16 were 47.1 μM and 9.6 x 10⁻³ μmole min⁻¹ when endocellulase activity was measured and 106.3 μM and 2.1 x 10⁻⁵ μmol min⁻¹ when exocellulase activity was assessed. CelEdx16 was optimally active at pH 5.0 and 40 °C.

Requirement of the type II secretion system for utilization of cellulosic substrates by Cellvibrio japonicus

Cellulosic biofuels represent a powerful alternative to petroleum but are currently limited by the inefficiencies of the conversion process. While gram-positive and fungal organisms have been widely explored as sources of cellulases and hemicellulases for biomass degradation, gram-negative organisms have received less experimental attention. We investigated the ability of Cellvibrio japonicus, a recently sequenced gram-negative cellulolytic bacterium, to degrade bioenergy-related feedstocks. Using a newly developed biomass medium, we showed that C. japonicus is able to utilize corn stover and switchgrass as sole sources of carbon and energy for growth. We also developed tools for directed gene disruptions in C. japonicus and used this system to construct a mutant in the gspD gene, which is predicted to encode a component of the type II secretion system. The gspD::pJGG1 mutant displayed a greater-than-2-fold decrease in endoglucanase secretion compared to wild-type C. japonicus. In addition, the mutant strain showed a pronounced growth defect in medium with biomass as a carbon source, yielding 100-fold fewer viable cells than the wild type. To test the potential of C. japonicus to undergo metabolic engineering, we constructed a strain able to produce small amounts of ethanol from biomass. Collectively, these data suggest that C. japonicus is a useful platform for biomass conversion and biofuel production.

Purification and characterization of recombinant endoglucanases from the pine wood nematode Bursaphelenchus xylophilus

A family of endoglucanases belonging to glycoside hydrolase family (GHF) 45 have been isolated from the pine wood nematode Bursaphelenchus xylophilus. Here we describe the purification and characterization of the recombinant enzymes, named Bx-ENG-1, 2, and 3, expressed in Pichia pastoris. The respective molecular masses of purified Bx-ENG-1, 2, and 3 were estimated to be 18, 33-39, and 100-140 kDa by SDS-PAGE, and 18, 67, and 252 kDa by gel filtration, suggesting that Bx-ENG-1 existed in an unglycosylated monomeric form and Bx-ENG-2 and Bx-ENG-3 in a glycosylated dimeric form. The enzymatic properties of the recombinant enzymes were similar to each other: optimal activity at 60 degrees C at about pH 6.0, like other endoglucanases of GHF45. The recombinant enzymes displayed the highest activity toward lichenan, and lower activities were observed on carboxymethyl cellulose and amorphous cellulose. Nematode enzymes also hydrolyzed glucomannan, the most abundant hemicellulose in the cell walls of softwood. These substrate specificities suggest that B. xylophilus endoglucanases acted on the cellulose-hemicellulose complex in the cell walls, resulting in a weakening of the mechanical strength of the cell walls to facilitate the nematode's feeding on plant cells.

Understanding the biological rationale for the diversity of cellulose-directed carbohydrate-binding modules in prokaryotic enzymes

Plant cell walls are degraded by glycoside hydrolases that often contain noncatalytic carbohydrate-binding modules (CBMs), which potentiate degradation. There are currently 11 sequence-based cellulose-directed CBM families; however, the biological significance of the structural diversity displayed by these protein modules is uncertain. Here we interrogate the capacity of eight cellulose-binding CBMs to bind to cell walls. These modules target crystalline cellulose (type A) and are located in families 1, 2a, 3a, and 10 (CBM1, CBM2a, CBM3a, and CBM10, respectively); internal regions of amorphous cellulose (type B; CBM4-1, CBM17, CBM28); and the ends of cellulose chains (type C; CBM9-2). Type A CBMs bound particularly effectively to secondary cell walls, although they also recognized primary cell walls. Type A CBM2a and CBM10, derived from the same enzyme, displayed differential binding to cell walls depending upon cell type, tissue, and taxon of origin. Type B CBMs and the type C CBM displayed much weaker binding to cell walls than type A CBMs. CBM17 bound more extensively to cell walls than CBM4-1, even though these type B modules display similar binding to amorphous cellulose in vitro. The thickened primary cell walls of celery collenchyma showed significant binding by some type B modules, indicating that in these walls the cellulose chains do not form highly ordered crystalline structures. Pectate lyase treatment of sections resulted in an increased binding of cellulose-directed CBMs, demonstrating that decloaking cellulose microfibrils of pectic polymers can increase CBM access. The differential recognition of cell walls of diverse origin provides a biological rationale for the diversity of cellulose-directed CBMs that occur in cell wall hydrolases and conversely reveals the variety of cellulose microstructures in primary and secondary cell walls.

Construction of minimum size cellulase (Cel5Z) from Pectobacterium chrysanthemi PY35 by removal of the C-terminal region

Pectobacterium chrysanthemi PY35 secretes the endoglucanase Cel5Z, an enzyme of the glycoside hydrolase family 5. Cel5Z is a 426 amino acid, signal peptide (SP)-containing protein composed of two domains: a large N-terminal catalytic domain (CD; 291 amino acids) and a small C-terminal cellulose binding domain (CBD; 62 amino acids). These two domains are separated by a 30 amino acid linker region (LR). A truncated cel5Z gene was constructed with the addition of a nonsense mutation that removes the C-terminal region of the protein. A truncated Cel5Z protein, consisting of 280 amino acid residues, functioned as a mature enzyme despite the absence of the SP, 11 amino acid CD, LR, and CBD region. In fact, this truncated Cel5Z protein showed an enzymatic activity 80% higher than that of full-length Cel5Z. However, cellulase activity was undetectable in mature Cel5Z proteins truncated to less than 280 amino acids.

cDNA cloning, expression, and enzymatic activity of a cellulase from the mulberry longicorn beetle, Apriona germari

A novel cellulase [beta-1,4-endoglucanase (EGase), EC 3.2.1.4] cDNA belonging to glycoside hydrolase family (GHF) 45 was cloned from the mulberry longicorn beetle, Apriona germari. The cDNA encoding EGase of A. germari (Ag-EGase) is 711 bp long with an open reading frame of 237 amino acid residues. The Ag-EGase was closely related to another beetle, Phaedon cochleariae, cellulase and one symbiotic protist cellulase in the hindgut of the termite Reticulitermes speratus, those belonging to GHF 45. The catalytic sites of GHF 45 are conserved in Ag-EGase. Southern blot analysis of genomic DNA suggested the presence of Ag-EGase gene as a single copy and Northern blot analysis confirmed midgut-specific expression at transcriptional level. Similarly, the Ag-EGase enzyme assay exhibited high activity only in midgut tissue, suggesting that the midgut is the prime site where large quantities of EGase are synthesized for degrading the absorbed cellulose from the diet. The cDNA encoding Ag-EGase was expressed as a 29-kDa polypeptide in baculovirus-infected insect Sf9 cells and the culture supernatants of the recombinant baculovirus-infected cells showed EGase enzyme activity of 15.25 U/ml of medium containing 0.5 x 10(6) cells at 5 days post-infection (p.i.). The enzyme activity of the purified recombinant Ag-EGase expressed in baculovirus-infected insect cells was approximately 992 U per mg of recombinant Ag-EGase. The purified recombinant Ag-EGase showed the highest enzymatic activity at 50 degrees C and pH 6.0, and was stable at 55 degrees C at least for 10 min.

Molecular cloning of endo-beta-D-1,4-glucanase genes, rce1, rce2, and rce3, from Rhizopus oryzae

Three endoglucanase genes, designated the rce1, rce2, and rce3 genes, were isolated from Rhizopus oryzae as the first cellulase genes from the subdivision ZYGOMYCOTA: All the amino acid sequences deduced from the rce1, rce2, and rce3 genes consisted of three distinct domains: cellulose binding domains, linker domains, and catalytic domains belonging to glycosyl hydrolase family 45. The rce3 gene had two tandem repeated sequences of cellulose binding domains, while rce1 and rce2 had only one. rce1, rce2, and rce3 had various lengths of linker sequences.

Biochemical characterization of Thermotoga maritima endoglucanase Cel74 with and without a carbohydrate binding module (CBM)

The genome of the hyperthermophilic bacterium Thermotoga maritima (Tm) encodes at least eight glycoside hydrolases with putative signal peptides; the biochemical characteristics of seven of these have been reported previously. The eighth, Tm Cel74, is encoded by an open reading frame of 2124 bp corresponding to a polypeptide of 79 kDa with a signal peptide at the amino-terminus. The gene (lacking the signal peptide) encoding Tm Cel74 was expressed as a 77 kDa monomeric polypeptide in Escherichia coli and found to be optimally active at pH 6, 90 degrees C, with a melting temperature of approximately 105 degrees C. The cel74 gene was previously found to be induced during T. maritima growth on a variety of polysaccharides, including barley glucan, carboxymethyl cellulose (CMC), glucomannan, galactomannan and starch. However, while Tm Cel74 was most active towards barley glucan and to a lesser extent CMC, glucomannan and tamarind (xyloglucan), no activity was detected on other glycans, including galactomannan, laminarin and starch. Also, Tm Cel74 did not contain a carbohydrate binding module (CBM), versions of which have been identified in the amino acid sequences of other family 74 enzymes. As such, a CBM associated with a chitinase in another hyperthermophile, Pyrococcus furiosus, was used to create a fusion protein that was active on crystalline cellulose; Tm Cel74 lacked activity on this substrate. Based on the cleavage pattern determined for Tm Cel74 on glucan-based substrates, this enzyme likely initiates recruitment of carbohydrate carbon and energy sources by creating oligosaccharides that are transported into the cell for further processing.

Evidence for temporal regulation of the two Pseudomonas cellulosa xylanases belonging to glycoside hydrolase family 11

Pseudomonas cellulosa is a highly efficient xylan-degrading bacterium. Genes encoding five xylanases, and several accessory enzymes, which remove the various side chains that decorate the xylan backbone, have been isolated from the pseudomonad and characterized. The xylanase genes consist of xyn10A, xyn10B, xyn10C, xyn10D, and xyn11A, which encode Xyn10A, Xyn10B, Xyn10C, Xyn10D, and Xyn11A, respectively. In this study a sixth xylanase gene, xyn11B, was isolated which encodes a 357-residue modular enzyme, designated Xyn11B, comprising a glycoside hydrolase family 11 catalytic domain appended to a C-terminal X-14 module, a homologue of which binds to xylan. Localization studies showed that the two xylanases with glycoside hydrolase family (GH) 11 catalytic modules, Xyn11A and Xyn11B, are secreted into the culture medium, whereas Xyn10C is membrane bound. xyn10C, xyn10D, xyn11A, and xyn11B were all abundantly expressed when the bacterium was cultured on xylan or beta-glucan but not on medium containing mannan, whereas glucose repressed transcription of these genes. Although all of the xylanase genes were induced by the same polysaccharides, temporal regulation of xyn11A and xyn11B was apparent on xylan-containing media. Transcription of xyn11A occurred earlier than transcription of xyn11B, which is consistent with the predicted mode of action of the encoded enzymes. Xyn11A, but not Xyn11B, exhibits xylan esterase activity, and the removal of acetate side chains is required for xylanases to hydrolyze the xylan backbone. A transposon mutant of P. cellulosa in which xyn11A and xyn11B were inactive displayed greatly reduced extracellular but normal cell-associated xylanase activity, and its growth rate on medium containing xylan was indistinguishable from wild-type P. cellulosa. Based on the data presented here, we propose a model for xylan degradation by P. cellulosa in which the GH11 enzymes convert decorated xylans into substituted xylooligosaccharides, which are then hydrolyzed to their constituent sugars by the combined action of cell-associated GH10 xylanases and side chain-cleaving enzymes.

Activity enhancement of Cel5Z from Pectobacterium chrysanthemi PY35 by removing C-terminal region

The phytopathogenic bacterium Pectobacteium chrysanthemi PY35 secretes Cel5Z endoglucanase belonging to the glycoside hydrolase family 5 of EC 3.2.1.4. The mutation of cel5Z::Omega gene was constructed by cloning the 2.0-kb SmaI fragment containing the streptomycin/spectinomycin-resistance gene of pHP45(Omega) into the BalI site of pPY100. The insertion of Omega fragment generated a new stop codon, removing the Ser/Thr-rich linker region and the cellulose binding domain (CBD) in the C-terminal region of cel5Z gene. By subsequent subcloning from this 4.9-kb fragment (pPY1001), a 1.0-kb (pPY1002) fragment was obtained and designated as cel5Z::Omega. The cel5Z::Omega gene had an open reading frame (ORF) of 1011 bp, encoding 336 amino acids, starting with an ATG codon and ending with a new TGA stop codon. The molecular mass of the Cel5Z::Omega protein in E. coli transformant appeared to be 32 kDa by SDS-PAGE analysis in the presence of carboxymethyl-cellulose (CMC). The Cel5Z::Omega protein hydrolyzed CMC with 1.7-fold higher activity than the intact Cel5Z cellulase.

A new family of rhamnogalacturonan lyases contains an enzyme that binds to cellulose

Pseudomonas cellulosa is an aerobic bacterium that synthesizes an extensive array of modular cellulases and hemicellulases, which have a modular architecture consisting of catalytic domains and distinct non-catalytic carbohydrate-binding modules (CBMs). To investigate whether the main-chain-cleaving pectinases from this bacterium also have a modular structure, a library of P. cellulosa genomic DNA, constructed in lambdaZAPII, was screened for pectinase-encoding sequences. A recombinant phage that attacked arabinan, galactan and rhamnogalacturonan was isolated. The encoded enzyme, designated Rgl11A, had a modular structure comprising an N-terminal domain that exhibited homology to Bacillus and Streptomyces proteins of unknown function, a middle domain that exhibited sequence identity to fibronectin-3 domains, and a C-terminal domain that was homologous to family 2a CBMs. Expression of the three modules of the Pseudomonas protein in Escherichia coli showed that its C-terminal module was a functional cellulose-binding domain, and the N-terminal module consisted of a catalytic domain that hydrolysed rhamnogalacturonan-containing substrates. The activity of Rgl11A against apple- and potato-derived rhamnogalacturonan substrates indicated that the enzyme had a strong preference for rhamnogalacturonans that contained galactose side chains, and which were not esterified. The enzyme had an absolute requirement for calcium, a high optimum pH, and catalysis was associated with an increase in absorbance at 235 nm, indicating that glycosidic bond cleavage was mediated via a beta-elimination mechanism. These data indicate that Rgl11A is a rhamnogalacturonan lyase and, together with the homologous Bacillus and Streptomyces proteins, comprise a new family of polysaccharide lyases. The presence of a family 2a CBM in Rgl11A, and in a P. cellulosa pectate lyase described in the accompanying paper [Brown, Mallen, Charnock, Davies and Black (2001) Biochem. J. 355, 155-165] suggests that the capacity to bind cellulose plays an important role in the activity of main-chain-cleaving Pseudomonas pectinases, in addition to cellulases and hemicellulases.

Pectate lyase 10A from Pseudomonas cellulosa is a modular enzyme containing a family 2a carbohydrate-binding module

Pectate lyase 10A (Pel10A) enzyme from Pseudomonas cellulosa is composed of 649 residues and has a molecular mass of 68.5 kDa. Sequence analysis revealed that Pel10A contained a signal peptide and two serine-rich linker sequences that separate three modules. Sequence similarity was seen between the 9.2 kDa N-terminal module of Pel10A and family 2a carbohydrate-binding modules (CBMs). This N-terminal module of Pel10A was shown to encode an independently functional module with affinity to crystalline cellulose. A high sequence identity of 66% was seen between the 14.2 kDa central module of Pel10A and the functionally uncharacterized central modules of the xylan-degrading enzymes endoxylanase 10B, arabinofuranosidase 62C and esterase 1D, also from P. cellulosa. The 35.8 kDa C-terminal module of Pel10A was shown to have 30 and 36% identities with the family 10 pectate lyases from Azospirillum irakense and an alkaliphilic strain of Bacillus sp. strain KSM-P15, respectively. This His-tagged C-terminal module of the Pel10A was shown to encode an independent catalytic module (Pel10Acm). Pel10Acm was shown to cleave pectate and pectin in an endo-fashion and to have optimal activity at pH 10 and in the presence of 2 mM Ca2+. Highest enzyme activity was detected at 62 degrees C. Pel10Acm was shown to be most active against pectate (i.e. polygalacturonic acid) with progressively less activity against 31, 67 and 89% esterified citrus pectins. These data suggest that Pel10A has a preference for sequences of non-esterified galacturonic acid residues. Significantly, Pel10A and the P. cellulosa rhamnogalacturonan lyase 11A, in the accompanying article [McKie, Vincken, Voragen, van den Broek, Stimson and Gilbert (2001) Biochem. J. 355, 167-177], are the first CBM-containing pectinases described to date.

Primary sequence and enzymic properties of two modular endoglucanases, Cel5A and Cel45A, from the anaerobic fungus Piromyces equi

Two endoglucanase cDNAs, designated cel5A and cel45A, were isolated from a cDNA library of the anaerobic fungus Piromyces equi. Sequence analysis revealed that cel5A has an open reading frame of 5142 bp and encodes a 1714 amino acid modular enzyme, Cel5A, with a molecular mass of 194847 Da. Cel5A consists of four catalytic domains homologous to family-5 glycosyl hydrolases, two C-terminal dockerins and one N-terminal dockerin. This is the first report of a complete gene containing tandem repeats of family-5 catalytic domains. The cDNA cel45A has an open reading frame of 1233 bp and encodes a 410 amino acid modular enzyme, Cel45A, with a molecular mass of 44380 Da. The catalytic domain, located at the C terminus, is homologous to the family-45 glycosyl hydrolases. Cel45A is the first family-45 enzyme to be described in an anaerobe. The presence of dockerins at the N and C termini of Cel5A and at the N terminus of Cel45A implies that both enzymes are part of the high-molecular-mass cellulose-degrading complex produced by Piromyces equi. The catalytic domain nearest the C terminus of Cel5A and the catalytic domain of Cel45A were hyperexpressed as thioredoxin fusion proteins, Trx-Cel5A' and Trx-Cel45A', and subjected to biochemical analysis. Trx-Cel5A' has a broad substrate range, showing activity against carboxymethylcellulose, acid-swollen cellulose, barley beta-glucan, lichenin, carob galactomannan, p-nitrophenyl beta-D-cellobiopyranoside and xylan. Trx-Cel45A' is active against carboxymethylcellulose, acid-swollen cellulose and the mixed linkage glucans, barley beta-glucan and lichenin.

A family 26 mannanase produced by Clostridium thermocellum as a component of the cellulosome contains a domain which is conserved in mannanases from anaerobic fungi

Cellulosomes prepared by the cellulose affinity digestion method from Clostridium thermocellum culture supernatant hydrolysed carob galactomannan during incubation at 60 degrees C and pH 6.5. A recombinant phage expressing mannanase activity was isolated from a library of C. thermocellum genomic DNA constructed in lambdaZAPII. The cloned fragment of DNA containing a putative mannanase gene (manA) was sequenced, revealing an ORF of 1767 nt, encoding a protein (mannanase A; Man26A) of 589 aa with a molecular mass of 66816 Da. The putative catalytic domain (CD) of Man26A, identified by gene sectioning and sequence comparisons, displayed up to 32% identity with other mannanases belonging to family 26. Immediately downstream of the CD and separated from it by a short proline/threonine linker was a duplicated 24-residue dockerin motif, which is conserved in all C. thermocellum cellulosomal enzymes described thus far and mediates their attachment to the cellulosome-integrating protein (CipA). Man26A consisting of the CD alone (Man26A") was hyperexpressed in Escherichia coli BL21(DE3) and purified. The truncated enzyme hydrolysed soluble and insoluble mannan, displaying a temperature optimum of 65 degrees C and a pH optimum of 6.5, but exhibited no activity against other plant cell wall polysaccharides. Antiserum raised against Man26A" cross-reacted with a polypeptide with a molecular mass of 70000 Da that is part of the C. thermocellum cellulosome. A second variant of Man26A containing the N-terminal segment of 130 residues and the CD (Man26A") bound to ivory-nut mannan and weakly to soluble Carob galactomannan and insoluble cellulose. Man26A" consisting of the CD alone did not bind to these polysaccharides. These results indicate that the N-terminal 130 residues of mature Man26A may constitute a weak mannan-binding domain. Sequence comparisons revealed a lack of identity between this region of Man26A and other polysaccharide-binding domains, but significant identity with a region conserved in the three family 26 mannanases from the anaerobic fungus Piromyces equi.

Structure and function analysis of Pseudomonas plant cell wall hydrolases

Hydrolysis of the major structural polysaccharides of plant cell walls by the aerobic soil bacterium Pseudomonas fluorescens subsp. cellulosa is attributable to the production of multiple extracellular cellulase and hemicellulase enzymes, which are the products of distinct genes belonging to multigene families. Cloning and sequencing of individual genes, coupled with gene sectioning and functional analysis of the encoded proteins have provided a detailed picture of structure/function relationships and have established the cellulase-hemicellulase system of P. fluorescens subsp. cellulosa as a model for the plant cell wall degrading enzyme systems of aerobic cellulolytic bacteria. Cellulose- and xylan-degrading enzymes produced by the pseudomonad are typically modular in structure and contain catalytic and noncatalytic domains joined together by serine-rich linker sequences. The cellulases include a cellodextrinase; a beta-glucan glucohydrolase and multiple endoglucanases, containing catalytic domains belonging to glycosyl hydrolase families 5, 9, and 45; and cellulose-binding domains of families II and X, both of which are present in each enzyme. Endo-acting xylanases, with catalytic domains belonging to families 10 and 11, and accessory xylan-degrading enzymes produced by P. fluorescens subsp. cellulosa contain cellulose-binding domains of families II, X, and XI, which act by promoting close contact between the catalytic domain of the enzyme and its target substrate. A domain homologous with NodB from rhizobia, present in one xylanase, functions as a deacetylase. Mananase, arabinanase, and galactanase produced by the pseudomonad are single domain enzymes. Crystallographic studies, coupled with detailed kinetic analysis of mutant forms of the enzyme in which key residues have been altered by site-directed mutagenesis, have shown that xylanase A (family 10) has 8-fold alpha/beta barrel architecture, an extended substrate-binding cleft containing at least six xylose-binding pockets and a calcium-binding site that protects the enzyme from thermal inactivation, thermal unfolding, and attack by proteinases. Kinetic studies of mutant and wild-type forms of a mannanase and a galactanase from P. fluorescens subsp. cellulosa have enabled the catalytic mechanisms and key catalytic residues of these enzymes to be identified.

A chitin-binding domain in a marine bacterial chitinase and other microbial chitinases: implications for the ecology and evolution of 1,4-beta-glycanases

To examine the ecology and evolution of microbial chitinases, especially the chitin-binding domain, one of the chitinase genes (chiA) from the marine bacterium Vibrio harveyi was analysed. The deduced amino acid sequence of ChiA is not very similar overall to other proteins, except for two regions, the putative catalytic and chitin-binding domains. Among all bacterial chitinases sequenced to date, there is no relationship between percentage similarity of catalytic domains and chitin-binding domains in pairwise comparisons, suggesting that these two domains have evolved separately. The chitin-binding domain appears to be evolutionarily conserved among many bacterial chitinases and is also somewhat similar to cellulose-binding domains found in microbial cellulases and xylanases. To investigate the role of the chitin-binding domain, clones producing versions of ChiA with or without this domain were examined. One version with the domain (ChiA1) bound to and hydrolysed chitin, whereas a truncated ChiA without the putative chitin-binding domain (ChiA2) did not bind to chitin, but it could hydrolyse chitin, although not as well. ChiA1 diffused more slowly in agarose containing colloidal chitin than ChiA2, but diffusion of the two proteins in agarose without colloidal chitin was similar. These results indicate that the chitin-binding domain helps determine the movement of chitinase along N-acetylglucosamine strands and within environments containing chitin.

Microorganisms and enzymes involved in the degradation of plant fiber cell walls

One of natures most important biological processes is the degradation of lignocellulosic materials to carbon dioxide, water and humic substances. This implies possibilities to use biotechnology in the pulp and paper industry and consequently, the use of microorganisms and their enzymes to replace or supplement chemical methods is gaining interest. This chapter describes the structure of wood and the main wood components, cellulose, hemicelluloses and lignins. The enzyme and enzyme mechanisms used by fungi and bacteria to modify and degrade these components are described in detail. Techniques for how to assay for these enzyme activities are also described. The possibilities for biotechnology in the pulp and paper industry and other fiber utilizing industries based on these enzymes are discussed.

Pretreatment of sugar cane bagasse for enhanced ruminal digestion

Crop residues, such as sugar cane bagasse (SCB), have been largely used for cattle feeding. However, the close association that exists among the three major plant cell-wall components, cellulose, hemicellulose, and lignin, limits the efficiency by which ruminants can degrade these materials. Previously, we have shown that pretreatment with 3% (w/w) phosphoric acid, under relatively mild conditions, increased considerably the nutritional value for SCB. However, in this preliminary study, pretreated residues were not washed prior to in situ degradability assays because we wanted to explore the high initial solvability of lowmol-wt substances that were produced during pretreatment. We have now studied the suitability of water-and/or alkali-washed residues to in situ ruminal digestion. Alkali washing increased substrate cellulose content by removing most of the lignin and other residual soluble substances. As a result the ruminal degradability of these cleaner materials had first-order rate constants five times higher than those substrates with higher lignin content (e.g., stem-exploded bagasse). However, alkali washing also increased the time of ruminal lag phase of the cellulosic residue, probably because of hemicellulose and/or lignin removal and to the development of substrates with higher degree of crystallinity. Therefore, longer lag phases appear to be related to low microbial adherence after extensive water and alkali extraction, as Novell as to the slower process of cellulase induction during ruminal growth. The kinetic data on ruminal digestion were shown to be very well adjusted by a nonlinear model. Although pretreatment enhances substrate accessibility, the occurrence of an exceedingly high amount of lignin byproducts within the pretreated material reduces considerably its potential degradability.

A novel family 9 endoglucanase gene (celD), whose product cleaves substrates mainly to glucose, and its adjacent upstream homolog (celE) from Fibrobacter succinogenes S85

Two adjacent, highly homologous endoglucanase genes, celD and celE from Fibrobacter succinogenes S85, which were separated by an AT-rich 223-nucleotide intergenic region were characterized. The celD gene codes for endoglucanase D (EGD), a protein of 668 residues with a molecular mass of 71.7 kDa, while the celE gene encodes endoglucanase E, a protein of 467 amino acids with a molecular mass of 50.7 kDa. Both gene products belong to family 9 of glycosyl hydrolases. EGD displays an array of serine-rich periodic sequences (SRPS) near its C terminus which separate the catalytic domain from a basic terminal domain (BTD) rich in positively charged amino acids. Endoglucanase E has a BTD which is homologous to that of EGD, but it lacks the SRPS and 151 residues present at the N terminus of EGD. The SRPS structures may function as flexible linkers which facilitate interactions between the BTDs and acidic membrane proteins from F. succinogenes S85. The recombinant EGD showed pH and temperature optima of 5.5 and 35 degrees C, respectively. The enzyme cleaved barley-beta-glucan, carboxymethyl cellulose, and acid-swollen cellulose with specific activities of 19.1, 11.5 and 1.7 micromol x min-1 x mg of protein-1, respectively. There was a rapid drop in viscosity during hydrolyses of carboxymethyl cellulose, which is characteristic of an endoglucanase. Glucose was the main hydrolysis product of acid-swollen cellulose. Monospecific polyclonal antibodies against EGD detected the expression of a 68-kDa cellulose-inducible protein corresponding in size to the recombinant EGD in the culture fluid of F. succinogenes S85 and several larger proteins. The celE gene appeared to have little activity when expressed from the beta-galactosidase promoter in pBluescript in Escherichia coli; however, reverse transcriptase PCR analysis with internal primers for the gene revealed that a cellulose-inducible message was made in F. succinogenes, thereby documenting expression of the gene.

Genetic regulation of mating and dimorphism in Ustilago maydis

During its life cycle the phytopathogenic fungus Ustilago maydis adopts two different morphological forms. The haploid sporidia grow yeastlike and are nonpathogenic, the dikaryon grows filamentous and is able to infect corn plants. Cell fusion, pathogenicity, and dimorphism are under the control of two unlinked mating type loci, a and b. The a locus encodes a pheromone-based cell-recognition system and the b locus codes for two homeodomain proteins. Filamentous growth is dependent on the autocrine stimulation of the pheromone response pathway and on the presence of two nonidentical b alleles. We have identified genes whose expression is strictly limited to the filamentous phase and that are candidates for direct or indirect regulation by a and b. We also describe the development of a systematic screen for mutants that are affected in filamentous growth and (or) in pathogenicity. Key words: dimorphism, pheromones, homeodomain proteins, differential gene expression.

Novel cellulose-binding domains, NodB homologues and conserved modular architecture in xylanases from the aerobic soil bacteria Pseudomonas fluorescens subsp. cellulosa and Cellvibrio mixtus

To test the hypothesis that selective pressure has led to the retention of cellulose-binding domains (CBDs) by hemicellulase enzymes from aerobic bacteria, four new xylanase (xyn) genes from two cellulolytic soil bacteria, Pseudomonas fluorescens subsp. cellulosa and Cellvibrio mixtus, have been isolated and sequenced. Pseudomonas genes xynE and xynF encoded modular xylanases (XYLE and XYLF) with predicted M(r) values of 68,600 and 65000 respectively. XYLE contained a glycosyl hydrolase family 11 catalytic domain at its N-terminus, followed by three other domains; the second of these exhibited sequence identity with NodB from rhizobia. The C-terminal domain (40 residues) exhibited significant sequence identity with a non-catalytic domain of previously unknown function, conserved in all the cellulases and one of the hemicellulases previously characterized from the pseudomonad, and was shown to function as a CBD when fused to the reporter protein glutathione-S-transferase. XYLF contained a C-terminal glycosyl hydrolase family 10 catalytic domain and a novel CBD at its N-terminus. C. mixtus genes xynA and xynB exhibited substantial sequence identity with xynE and xynF respectively, and encoded modular xylanases with the same molecular architecture and, by inference, the same functional properties. In the absence of extensive cross-hybridization between other multiple cel (cellulase) and xyn genes from P. fluorescens subsp. cellulosa and genomic DNA from C. mixtus, similarity between the two pairs of xylanases may indicate a recent transfer of genes between the two bacteria.

Filament-specific expression of a cellulase gene in the dimorphic fungus Ustilago maydis

The phytopathogenic fungus Ustilago maydis exists in a yeast-like haploid form and as a filamentous dikaryon. Only the dikaryon can infect corn plants. We have isolated a gene, egl1, that is not expressed in haploid cells but strongly induced in the filament. Molecular and biochemical analyses revealed that egl1 encodes a cellulase. By immunogold labelling, secreted protein could be detected at the hyphal tip. Mutants deleted for egl1 are viable and are affected neither in filament formation nor in pathogenic development under the conditions tested.

The non-catalytic cellulose-binding domain of a novel cellulase from Pseudomonas fluorescens subsp. cellulosa is important for the efficient hydrolysis of Avicel

A genomic library of Pseudomonas fluorescens subsp. cellulosa DNA, constructed in lambda ZAPII, was screened for carboxymethyl-cellulase activity. The pseudomonad insert from a recombinant phage which displayed elevated cellulase activity in comparison with other cellulase-positive clones present in the library, was excised into pBluescript SK- to generate the plasmid pC48. The nucleotide sequence of the cellulase gene, designated celE, revealed a single open reading frame of 1710 bp that encoded a polypeptide, defined as endoglucanase E (CelE), of M(r) 59663. The deduced primary structure of CelE revealed an N-terminal signal peptide followed by a 300-amino-acid sequence that exhibited significant identity with the catalytic domains of cellulases belonging to glycosyl hydrolase Family 5. Adjacent to the catalytic domain was a 40-residue region that exhibited strong sequence identity to non-catalytic domains located in two other endoglucanases and a xylanase from P. fluorescens. The C-terminal 100 residues of CelE were similar to Type-I cellulose-binding domains (CBDs). The three domains of the cellulase were joined by linker sequences rich in serine residues. Analysis of the biochemical properties of full-length and truncated derivatives of CelE confirmed that the enzyme comprised an N-terminal catalytic domain and a C-terminal CBD. Analysis of purified CelE revealed that the enzyme had an M(r) of 56000 and an experimentally determined N-terminal sequence identical to residues 40-54 of the deduced primary structure of full-length CelE. The enzyme exhibited an endo mode of action in hydrolysing a range of cellulosic substrates including Avicel and acid-swollen cellulose, but did not attack xylan or any other hemicelluloses. A truncated form of the enzyme, which lacked the C-terminal CBD, displayed the same activity as full-length CelE against soluble cellulose and acid-swollen cellulose, but exhibited substantially lower activity than the full-length cellulase against Avicel. The significance of these data in relation to the role of the CBD is discussed.

Identification of a novel cellulose-binding domain within the multidomain 120 kDa xylanase XynA of the hyperthermophilic bacterium Thermotoga maritima

A segment of Thermotoga maritima strain MSB8 chromosomal DNA was isolated which encodes an endo-1,4-beta-D-xylanase, and the nucleotide sequence of the xylanase gene, designated xynA, was determined. With a half-life of about 40 min at 90 degrees C at the optimal pH of 6.2, purified recombinant XynA is one of the most thermostable xylanases known. XynA is a 1059-amino-acid (approximately 120 kDa) modular enzyme composed of an N-terminal signal peptide and five domains, in the order A1-A2-B-C1-C2. By comparison with other xylanases of family 10 of glycosyl hydrolases, the central approximately 340-amino-acid part (domain B) of XynA represents the catalytic domain. The N-terminal approximately 150-amino-acid repeated domains (A1-A2) have no significant similarity to the C-terminal approximately 170-amino-acid repeated domains (C1-C2). Cellulose-binding studies with truncated XynA derivatives and hybrid proteins indicated that the C-terminal repeated domains mediate the binding of XynA to microcrystalline cellulose and that C2 alone can also promote cellulose binding. C1 and C2 did not share amino acid sequence similarity with any other known cellulose-binding domain (CBD) and thus are CBDs of a novel type. Structurally related protein segments which are probably also CBDs were found in other multidomain xylanolytic enzymes. Deletion of the N-terminal repeated domains or of all the non-catalytic domains resulted in substantially reduced thermostability while a truncated xylanase derivative lacking the C-terminal tandem repeat was as thermostable as the full-length enzyme.(ABSTRACT TRUNCATED AT 250 WORDS)

A non-modular endo-beta-1,4-mannanase from Pseudomonas fluorescens subspecies cellulosa

Pseudomonas fluorescens subsp. cellulosa when cultured in the presence of carob galactomannan degraded the polysaccharide. To isolate gene(s) from P. fluorescens subsp. cellulosa encoding endo-beta-1,4-mannanase (mannanase) activity, a genomic library of Pseudomonas DNA, constructed in lambda ZAPII, was screened for mannanase-expressing clones using the dye-labelled substrate, azo-carob galactomannan. The nucleotide sequence of the pseudomonad insert from a mannanase-positive clone revealed a single open reading frame of 1257 bp encoding a protein of M(r) 46,938. The deduced N-terminal sequence of the putative polypeptide conformed to a typical prokaryotic signal peptide. Truncated derivatives of the mannanase, lacking 54 and 16 residues from the N- and C-terminus respectively of the mature form of the enzyme, did not exhibit catalytic activity. Inspection of the primary structure of the mannanase did not reveal any obvious linker sequences or protein motifs characteristic of the non-catalytic domains located in other Pseudomonas plant cell wall hydrolases. These data indicate that the mannanase is non-modulator, comprising a single catalytic domain. Comparison of the mannanase sequence with those in the SWISSPROT database revealed greatest sequence homology with the mannanase from Bacillus sp. Thus the Pseudomonas enzyme belongs to glycosyl hydrolase Family 26, a family containing mannanases and endoglucanases. Analysis of the substrate specificity of the mannanase showed that the enzyme hydrolysed mannan and galactomannan, but displayed little activity towards other polysaccharides located in the plant cell wall. The enzyme had a pH optimum of approx. 7.0, was resistant to proteolysis and had an M(r) of 46,000 when expressed by Escherichia coli.

The use of conserved cellulase family-specific sequences to clone cellulase homologue cDNAs from Fusarium oxysporum

Five cDNAs from the cellulolytic fungi Fusarium oxysporum that code for five distinct cellulase homologues have been cloned and sequenced. The cloning strategy exploited the hydrophobic cluster analysis-based cellulase family classification of Henrissat and Bairoch [Biochem. J. 293 (1993) 781-788] to design degenerate oligodeoxyribonucleotides (oligos) that encoded amino-acid sequences conserved in an intra-family, but not inter-family, manner among cellulases from different species. Polymerase chain reaction (PCR) experiments using F. oxysporum genomic DNA primed with these 'family-specific' oligos were used to rapidly generate PCR fragments which were in turn used to probe cDNA libraries. Two distinct cDNAs coding for cellulase C-family homologues and one cDNA each coding for homologues to the B, F and K families, were isolated in this manner. This approach is an example of the power of multiple sequence analysis to generate cross-species, homology-based probes to rapidly clone homologues in a species of interest.

A novel, small endoglucanase gene, egl5, from Trichoderma reesei isolated by expression in yeast

A method is presented for the isolation of genes encoding hydrolytic enzymes without any knowledge of the corresponding proteins. cDNA made from the organism of interest is cloned into a yeast vector to construct an expression library in the yeast Saccharomyces cerevisiae. Colonies producing hydrolytic enzymes are screened by activity plate assays. In this work, we constructed a yeast expression library from the filamentous fungus Trichoderma reesei and isolated a new beta-1,4-endoglucanase gene on plates containing beta-glucan. This gene, egl5, codes for a previously unknown small protein of 242 amino acids. Despite its small size, the protein contains two conservative domains found in Trichoderma cellulases, namely the cellulose-binding domain (CBD) and the linker region that connects the CBD to the catalytic core domain. Molecular modelling of the EGV CBD revealed some interesting structural differences compared to the CBD of the major cellulase CBHI from T. reesei. The catalytic core of EGV is unusually small for a cellulase and represents a new family of cellulases (Family K) and of glycosyl hydrolases (Family 45) together with the endoglucanase B of Pseudomonas fluorescens and the endoglucanase V of Humicola insolens on the basis of hydrophobic cluster analysis.

The cellulose-binding domain of endoglucanase A (CenA) from Cellulomonas fimi: evidence for the involvement of tryptophan residues in binding

Cellulomonas fimi endo-beta-1,4-glucanase A (CenA) contains a discrete N-terminal cellulose-binding domain (CBDCenA). Related CBDs occur in at least 16 bacterial glycanases and are characterized by four highly conserved Trp residues, two of which correspond to W14 and W68 of CBDCenA. The adsorption of CBDCenA to crystalline cellulose was compared with that of two Trp mutants (W14A and W68A). The affinities of the mutant CBDs for cellulose were reduced by approximately 50- and 30-fold, respectively, relative to the wild type. Physical measurements indicated that the mutant CBDs fold normally. Fluorescence data indicated that W14 and W68 were exposed on the CBD, consistent with their participation in binding to cellobiosyl residues on the cellulose surface.

Evidence for a general role for high-affinity non-catalytic cellulose binding domains in microbial plant cell wall hydrolases

Cellulases expressed by Cellulomonas fimi consist of a catalytic domain and a discrete non-catalytic cellulose-binding domain (CBD). To establish whether CBDs are common features of plant cell-wall hydrolases from C. fimi, the molecular architecture of xylanase D (XYLD) from this bacterium was investigated. The gene encoding XYLD, designated xynD, consisted of an open reading frame of 1936 bp encoding a protein of M(r) 68,000. The deduced primary sequence of XYLD was confirmed by the size (64 kDa) and N-terminal sequence of the purified recombinant xylanase. Biochemical analysis of the purified enzyme revealed that XYLD is an endoacting xylanase which displays no detectable activity against polysaccharides other than xylan. The predicted primary structure of XYLD comprised an N-terminal signal peptide followed by a 190-residue domain that exhibited significant homology to Family-G xylanases. Truncated derivatives of xynD, encoding the N-terminal 193 amino acids of mature XYLD directed the synthesis of a functional xylanase, confirming that the 190-residue N-terminal sequence constitutes the catalytic domain. The remainder of the enzyme consisted of two approximately 90-residue domains, which exhibited extensive homology with each other, and limited sequence identity with CBDs from other polysaccharide hydrolases. Between the two putative CBDs is a 197-amino-acid sequence that exhibits substantial homology with Rhizobium NodB proteins. The four discrete domains in XYLD were separated by either threonine/proline-or novel glycine-rich linker regions. Although full-length XYLD adsorbed to cellulose, truncated derivatives of the enzyme lacking the C-terminal CBD hydrolysed xylan but did not bind to cellulose.(ABSTRACT TRUNCATED AT 250 WORDS)

Molecular analysis of the major cellulase (CelV) of Erwinia carotovora: evidence for an evolutionary "mix-and-match" of enzyme domains

The structural gene for the major cellulase of Erwinia carotovora subspecies carotovora (Ecc) was isolated and expressed in Escherichia coli. Sequencing of the gene (celV) revealed a typical signal sequence and two functional domains in the enzyme; a catalytic domain linked by a short proline/threonine-rich linker to a cellulose-binding domain (CBD). The deduced amino acid sequence of the catalytic domain showed homology with cellulases of Family A, including enzymes from Bacillus spp. and Erwinia chrysanthemi CelZ, whereas the CBD showed homology with cellulases from several diverse families, supporting a "mix-and-match" hypothesis for evolution of this domain. Analysis of the substrate specificity of CelV showed it to be an endoglucanase with some exoglucanase activity. The pH optimum is about 7.0 and the temperature optimum about 42 degrees C. CelV is secreted by Ecc and by the taxonomically related Erwinia carotovora subspecies atroseptica (Eca) but not by E. coli. Overproduction of the enzyme from multicopy plasmids in Ecc appears to overload the secretory mechanism.

A modular esterase from Pseudomonas fluorescens subsp. cellulosa contains a non-catalytic cellulose-binding domain

The 5' regions of genes xynB and xynC, coding for a xylanase and arabinofuranosidase respectively, are identical and are reiterated four times within the Pseudomonas fluorescens subsp. cellulosa genome. To isolate further copies of the reiterated xynB/C 5' region, a genomic library of Ps. fluorescens subsp. cellulosa DNA was screened with a probe constructed from the conserved region of xynB. DNA from one phage which hybridized to the probe, but not to sequences upstream or downstream of the reiterated xynB/C locus, was subcloned into pMTL22p to construct pFG1. The recombinant plasmid expressed a protein in Escherichia coli, designated esterase XYLD, of M(r) 58,500 which bound to cellulose but not to xylan. XYLD hydrolysed aryl esters, released acetate groups from acetylxylan and liberated 4-hydroxy-3-methoxycinnamic acid from destarched wheat bran. The nucleotide sequence of the XYLD-encoding gene, xynD, revealed an open reading frame of 1752 bp which directed the synthesis of a protein of M(r) 60,589. The 5' 817 bp of xynD and the amino acid sequence between residues 37 and 311 of XYLD were almost identical with the corresponding regions of xynB and xynC and their encoded proteins XYLB and XYLC. Truncated derivatives of XYLD lacking the N-terminal conserved sequence retained the capacity to hydrolyse ester linkages, but did not bind cellulose. Expression of truncated derivatives of xynD, comprising the 5' 817 bp sequence, encoded a non-catalytic polypeptide that bound cellulose. These data indicate that XYLD has a modular structure comprising of a N-terminal cellulose-binding domain and a C-terminal catalytic domain.

Disulfide arrangement and functional domains of beta-1,4-endoglucanse E5 from Thermomonospora fusca

Thermomonospora fusca cellulase E5 contains six cysteine residues. The number and location of the disulfide bonds and the effect of reduction of the disulfides and modification of the resulting half-cystine residues on enzymatic activity were determined. No free sulfhydryl groups were found in E5. Reduction and subsequent labeling with iodoacetamide of E5 and of an enzymatically active 32-kDa proteolytic derivative of E5 (E5cd) showed that one of the three disulfides is accessible to reduction under nondenatured conditions while the other two are not accessible. Full reduction of the disulfides and complete carboxymethylation of the six cysteines decrease the specific activity of E5 on CMC by more than half, but reduction of only the exposed disulfide bond does not affect enzymatic activity or binding of E5 to cellulose. A 14-kDa proteolytic fragment of E5 containing 120 amino acids from the N-terminus of the protein was shown to bind to crystalline cellulose. This confirms earlier evidence that the cellulose binding domain of E5 is located at the N-terminus of the protein. This 14-kDa fragment contains the accessible disulfide bond involving Cys93 and Cys100. The location of the two disulfide bonds in the other fragment (E5cd) was determined by cleaving it with cyanogen bromide under conditions that left the disulfide bonds intact. The resulting peptides were separated under both nonreducing and reducing conditions using RP-HPLC. Amino acid analysis of peptide peaks indicated that one disulfide linkage in E5cd joins Cys138 to Cys143 while the other joins Cys166 to Cys406.