The replication of plasmid pSC101

Catalytically inactive long prokaryotic Argonaute systems employ distinct effectors to confer immunity via abortive infection

Argonaute proteins (Agos) bind short nucleic acids as guides and are directed by them to recognize target complementary nucleic acids. Diverse prokaryotic Agos (pAgos) play potential functions in microbial defense. The functions and mechanisms of a group of full-length yet catalytically inactive pAgos, long-B pAgos, remain unclear. Here, we show that most long-B pAgos are functionally connected with distinct associated proteins, including nucleases, Sir2-domain-containing proteins and trans-membrane proteins, respectively. The long-B pAgo-nuclease system (BPAN) is activated by guide RNA-directed target DNA recognition and performs collateral DNA degradation in vitro. In vivo, the system mediates genomic DNA degradation after sensing invading plasmid, which kills the infected cells and results in the depletion of the invader from the cell population. Together, the BPAN system provides immunoprotection via abortive infection. Our data also suggest that the defense strategy is employed by other long-B pAgos equipped with distinct associated proteins.

Identification and Characterization of Novel SPHINX/BMMF-like DNA Sequences Isolated from Non-Bovine Foods

Sixteen novel circular rep-encoding DNA sequences with high sequence homologies to previously described SPHINX and BMMF sequences were isolated for the first time from non-bovine foods (pork, wild boar, chicken meat, Alaska pollock, pangasius, black tiger shrimp, apple, carrot, and sprouts from alfalfa, radish, and broccoli). The phylogenetic analysis of the full-length circular genomes grouped these together with previously described representatives of SPHINX/BMMF group 1 and 2 sequences (eight in each group). The characterization of genome lengths, genes present, and conserved structures confirmed their relationship to the known SPHINX/BMMF sequences. Further analysis of iteron-like tandem repeats of SPHINX/BMMF group 1-related genomes revealed a correlation with both full-length sequence tree branches as well as Rep protein sequence tree branches and was able to differentiate subtypes of SPHINX/BMMF group 1 members. For the SPHINX/BMMF group 2 members, a distinct grouping of sequences into two clades (A and B) with subgroups could be detected. A deeper investigation of potential functional regions upstream of the rep gene of the new SPHINX/BMMF group 2 sequences revealed homologies to the dso and sso regions of known plasmid groups that replicate via the rolling circle mechanism. Phylogenetic analyses were accomplished by a Rep protein sequence analysis of different ssDNA viruses, pCRESS, and plasmids with the known replication mechanism, as this yielded deeper insights into the relationship of SPHINX/BMMF group 1 and 2 Rep proteins. A clear relation of these proteins to the Rep proteins of plasmids could be confirmed. Interestingly, for SPHINX/BMMF group 2 members, the relationship to rolling circle replication plasmids could also be verified. Furthermore, a relationship of SPHINX/BMMF group 1 Rep proteins to theta-replicating plasmid Reps is discussed.

Inducible plasmid copy number control for synthetic biology in commonly used E. coli strains

The ability to externally control gene expression has been paradigm shifting for all areas of biological research, especially for synthetic biology. Such control typically occurs at the transcriptional and translational level, while technologies enabling control at the DNA copy level are limited by either (i) relying on a handful of plasmids with fixed and arbitrary copy numbers; or (ii) require multiple plasmids for replication control; or (iii) are restricted to specialized strains. To overcome these limitations, we present TULIP (TUnable Ligand Inducible Plasmid): a self-contained plasmid with inducible copy number control, designed for portability across various Escherichia coli strains commonly used for cloning, protein expression, and metabolic engineering. Using TULIP, we demonstrate through multiple application examples that flexible plasmid copy number control accelerates the design and optimization of gene circuits, enables efficient probing of metabolic burden, and facilitates the prototyping and recycling of modules in different genetic contexts.

Holistic engineering of cell-free systems through proteome-reprogramming synthetic circuits

Synthetic biology has focused on engineering genetic modules that operate orthogonally from the host cells. A synthetic biological module, however, can be designed to reprogram the host proteome, which in turn enhances the function of the synthetic module. Here, we apply this holistic synthetic biology concept to the engineering of cell-free systems by exploiting the crosstalk between metabolic networks in cells, leading to a protein environment more favorable for protein synthesis. Specifically, we show that local modules expressing translation machinery can reprogram the bacterial proteome, changing the expression levels of more than 700 proteins. The resultant feedback generates a cell-free system that can synthesize fluorescent reporters, protein nanocages, and the gene-editing nuclease Cas9, with up to 5-fold higher expression level than classical cell-free systems. Our work demonstrates a holistic approach that integrates synthetic and systems biology concepts to achieve outcomes not possible by only local, orthogonal circuits.

Desensitizing plant EPSP synthase to glyphosate: Optimized global sequence context accommodates a glycine-to-alanine change in the active site

5-Enolpyruvylshikimate-3-phosphate synthase (EPSPS) catalyzes the transfer of a carboxyvinyl group from phosphoenolpyruvate (PEP) to shikimate-3-phosphate and in plants is the target of the herbicide glyphosate. EPSPSs with high catalytic efficiency and insensitivity to glyphosate are of microbial origin, including the enzyme from Agrobacterium strain CP4, in which insensitivity is conferred by an active site alanine. In the sequence context of plant EPSPSs, alanine in place of glycine at the equivalent position interferes with the binding of both glyphosate and PEP. We show here that iterative optimization of maize EPSPS containing the G101A substitution yielded variants on par with CP4 in terms of catalytic activity in the presence of glyphosate. The improvement relative to G101A alone was entirely due to reduction in Km for PEP from 333 to 18 μm, versus 9.5 μm for native maize EPSPS. A large portion of the reduction in Km was conferred by two down-sizing substitutions (L97C and V332A) within 8 Å of glyphosate, which together reduced Km for PEP to 43 μm Although the original optimization was conducted with maize EPSPS, contextually homologous substitutions conferred similar properties to the EPSPSs of other crops. We also discovered a variant having the known glyphosate-desensitizing substitution P106L plus three additional ones that reduced the Km for PEP from 47 μm, observed with P106L alone, to 10.3 μm The improvements obtained with both Ala101 and Leu106 have implications regarding glyphosate-tolerant crops and weeds.

CRISPR-Cas12a-Assisted Recombineering in Bacteria

Clustered regularly interspaced short palindromic repeat (CRISPR)-Cas12a (Cpf1) has emerged as an effective genome editing tool in many organisms. Here, we developed and optimized a CRISPR-Cas12a-assisted recombineering system to facilitate genetic manipulation in bacteria. Using this system, point mutations, deletions, insertions, and gene replacements can be easily generated on the chromosome or native plasmids in Escherichia coli, Yersinia pestis, and Mycobacterium smegmatis Because CRISPR-Cas12a-assisted recombineering does not require introduction of an antibiotic resistance gene into the chromosome to select for recombinants, it is an efficient approach for generating markerless and scarless mutations in bacteria.IMPORTANCE The CRISPR-Cas9 system has been widely used to facilitate genome editing in many bacteria. CRISPR-Cas12a (Cpf1), a new type of CRISPR-Cas system, allows efficient genome editing in bacteria when combined with recombineering. Cas12a and Cas9 recognize different target sites, which allows for more precise selection of the cleavage target and introduction of the desired mutation. In addition, CRISPR-Cas12a-assisted recombineering can be used for genetic manipulation of plasmids and plasmid curing. Finally, Cas12a-assisted recombineering in the generation of point mutations, deletions, insertions, and replacements in bacteria has been systematically analyzed. Taken together, our findings will guide efficient Cas12a-mediated genome editing in bacteria.

Sequence-specific interactions of Rep proteins with ssDNA in the AT-rich region of the plasmid replication origin

The DNA unwinding element (DUE) is a sequence rich in adenine and thymine residues present within the origin region of both prokaryotic and eukaryotic replicons. Recently, it has been shown that this is the site where bacterial DnaA proteins, the chromosomal replication initiators, form a specific nucleoprotein filament. DnaA proteins contain a DNA binding domain (DBD) and belong to the family of origin binding proteins (OBPs). To date there has been no data on whether OBPs structurally different from DnaA can form nucleoprotein complexes within the DUE. In this work we demonstrate that plasmid Rep proteins, composed of two Winged Helix domains, distinct from the DBD, specifically bind to one of the strands of ssDNA within the DUE. We observed nucleoprotein complexes formed by these Rep proteins, involving both dsDNA containing the Rep-binding sites (iterons) and the strand-specific ssDNA of the DUE. Formation of these complexes required the presence of all repeated sequence elements located within the DUE. Any changes in these repeated sequences resulted in the disturbance in Rep-ssDNA DUE complex formation and the lack of origin replication activity in vivo or in vitro.

AT-rich region and repeated sequences - the essential elements of replication origins of bacterial replicons

Repeated sequences are commonly present in the sites for DNA replication initiation in bacterial, archaeal, and eukaryotic replicons. Those motifs are usually the binding places for replication initiation proteins or replication regulatory factors. In prokaryotic replication origins, the most abundant repeated sequences are DnaA boxes which are the binding sites for chromosomal replication initiation protein DnaA, iterons which bind plasmid or phage DNA replication initiators, defined motifs for site-specific DNA methylation, and 13-nucleotide-long motifs of a not too well-characterized function, which are present within a specific region of replication origin containing higher than average content of adenine and thymine residues. In this review, we specify methods allowing identification of a replication origin, basing on the localization of an AT-rich region and the arrangement of the origin's structural elements. We describe the regularity of the position and structure of the AT-rich regions in bacterial chromosomes and plasmids. The importance of 13-nucleotide-long repeats present at the AT-rich region, as well as other motifs overlapping them, was pointed out to be essential for DNA replication initiation including origin opening, helicase loading and replication complex assembly. We also summarize the role of AT-rich region repeated sequences for DNA replication regulation.

The response regulator SprE (RssB) modulates polyadenylation and mRNA stability in Escherichia coli

In Escherichia coli, the adaptor protein SprE (RssB) controls the stability of the alternate sigma factor RpoS (sigma(38) and sigma(S)). When nutrients are abundant, SprE binds RpoS and delivers it to ClpXP for degradation, but when carbon sources are depleted, this process is inhibited. It also has been noted that overproduction of SprE is toxic. Here we show that null mutations in pcnB, encoding poly(A) polymerase I (PAP I), and in hfq, encoding the RNA chaperone Hfq, suppress this toxicity. Since PAP I, in conjunction with Hfq, is responsible for targeting RNAs, including mRNAs, for degradation by adding poly(A) tails onto their 3' ends, these data indicate that SprE helps modulate the polyadenylation pathway in E. coli. Indeed, in exponentially growing cells, sprE deletion mutants exhibit significantly reduced levels of polyadenylation and increased stability of specific mRNAs, similar to what is observed in a PAP I-deficient strain. In stationary phase, we show that SprE changes the intracellular localization of PAP I. Taken together, we propose that SprE plays a multifunctional role in controlling the transcriptome, regulating what is made via its effects on RpoS, and modulating what is degraded via its effects on polyadenylation and turnover of specific mRNAs.

IHF-dependent activation of P1 plasmid origin by dnaA

In bacteria, many DNA-protein interactions that initiate transcription, replication and recombination require the mediation of DNA architectural proteins such as IHF and HU. For replication initiation, plasmid P1 requires three origin binding proteins: the architectural protein HU, a plasmid-specific initiator, RepA, and the Escherichia coli chromosomal initiator, DnaA. The two initiators bind in the origin of replication to multiple sites, called iterons and DnaA boxes respectively. We show here that all five known DnaA boxes can be deleted from the plasmid origin provided the origin is extended by about 120 bp. The additional DNA provides an IHF site and most likely a weak DnaA binding site, because replacing the putative site with an authentic DnaA box enhanced plasmid replication in an IHF-dependent manner. IHF most likely brings about interactions between distally bound DnaA and RepA by bending the intervening DNA. The role of IHF in activating P1 origin by allowing DnaA binding to a weak site is reminiscent of the role the protein plays in initiating the host chromosomal replication.

The Escherichia coli UvrD helicase is essential for Tus removal during recombination-dependent replication restart from Ter sites

Blocking replication forks in the Escherichia coli chromosome by ectopic Ter sites renders the RecBCD pathway of homologous recombination and SOS induction essential for viability. In this work, we show that the E. coli helicase II (UvrD) is also essential for the growth of cells where replication forks are arrested at ectopic Ter sites. We propose that UvrD is required for Tus removal from Ter sites. The viability of a SOS non-inducible Ter-blocked strain is fully restored by the expression of the two SOS-induced proteins UvrD and RecA at high level, indicating that these are the only two SOS-induced proteins required for replication across Ter/Tus complexes. Several observations suggest that UvrD acts in concert with homologous recombination and we propose that UvrD is associated with recombination-initiated replication forks and that it removes Tus when a PriA-dependent, restarted replication fork goes across the Ter/Tus complex. Finally, expression of the UvrD homologue from Bacilus subtilis PcrA restores the growth of uvrD-deficient Ter-blocked cells, indicating that the capacity to dislodge Tus is conserved in this distant bacterial species.

Chromosomal lesion suppression and removal in Escherichia coli via linear DNA degradation

RecBCD is a DNA helicase/exonuclease implicated in degradation of foreign linear DNA and in RecA-dependent recombinational repair of chromosomal lesions in E. coli. The low viability of recA recBC mutants vs. recA mutants indicates the existence of RecA-independent roles for RecBCD. To distinguish among possible RecA-independent roles of the RecBCD enzyme in replication, repair, and DNA degradation, we introduced wild-type and mutant combinations of the recBCD chromosomal region on a low-copy-number plasmid into a DeltarecA DeltarecBCD mutant and determined the viability of resulting strains. Our results argue against ideas that RecBCD is a structural element in the replication factory or is involved in RecA-independent repair of chromosomal lesions. We found that RecBCD-catalyzed DNA degradation is the only activity important for the recA-independent viability, suggesting that degradation of linear tails of sigma-replicating chromosomes could be one of the RecBCD's roles. However, since the weaker DNA degradation capacity due a combination of the RecBC helicase and ssDNA-specific exonucleases restores viability of the DeltarecA DeltarecBCD mutant to a significant extent, we favor suppression of chromosomal lesions via linear DNA degradation at reversed replication forks as the major RecA-independent role of the RecBCD enzyme.

Mechanistic aspects of DnaA-RepA interaction as revealed by yeast forward and reverse two-hybrid analysis

Using yeast forward and reverse two-hybrid analysis and biochemical techniques, we present novel and definitive in vivo and in vitro evidence that both the N-terminal domain I and C-terminal domain IV of the host-encoded DnaA initiator protein of Escherichia coli interact physically with plasmid-encoded RepA initiator of pSC101. The N-terminal, but not the C-terminal, region of RepA interacted with DnaA in vitro. These protein-protein interactions are critical for two very early steps of replication initiation, namely origin unwinding and helicase loading. Neither domain I nor IV of DnaA could individually collaborate with RepA to promote pSC101 replication. However, when the two domains are co-expressed within a common cell milieu and allowed to associate non-covalently with each other via a pair of leucine zippers, replication of the plasmid was supported in vivo. Thus, the result shows that physical tethering, either non-covalent or covalent, of domain I and IV of DnaA and interaction of both domains with RepA, are critical for replication initiation. The results also provide the molecular basis for a novel, potential, replication-based bacterial two-hybrid system.

DnaA boxes in the P1 plasmid origin: the effect of their position on the directionality of replication and plasmid copy number

The DnaA protein is essential for initiation of DNA replication in a wide variety of bacterial and plasmid replicons. The replication origin in these replicons invariably contains specific binding sites for the protein, called DnaA boxes. Plasmid P1 contains a set of DnaA boxes at each end of its origin but can function with either one of the sets. Here we report that the location of origin-opening, initiation site of replication forks and directionality of replication do not change whether the boxes are present at both or at one of the ends of the origin. Replication was bidirectional in all cases. These results imply that DnaA functions similarly from the two ends of the origin. However, origins with DnaA boxes proximal to the origin-opening location opened more efficiently and maintained plasmids at higher copy numbers. Origins with the distal set were inactive unless the adjacent P1 DNA sequences beyond the boxes were included. At either end, phasing of the boxes with respect to the remainder of the origin influenced the copy number. Thus, although the boxes can be at either end, their precise context is critical for efficient origin function.

Control of plasmid DNA replication by iterons: no longer paradoxical

Replication origins of a family of bacterial plasmids have multiple sites, called iterons, for binding a plasmid-specific replication initiator protein. The iteron-initiator interactions are essential for plasmid replication as well as for inhibition of plasmid over-replication. The inhibition increases with plasmid copy number and eventually shuts plasmid replication off completely. The mechanism of inhibition appears to be handcuffing, the coupling of origins via iteron-bound initiators that block origin function. The probability of a trans-reaction such as handcuffing is expected to increase with plasmid copy number and diminish with increases in cell volume, explaining how the copy number can be maintained in a growing cell. Control is also exerted at the level of initiator synthesis and activation by chaperones. We propose that increases in active initiators promote initiation by overcoming handcuffing, but handcuffing dominates when the copy number reaches a threshold. Handcuffing should be ultrasensitive to copy number, as the negative control by iterons can be stringent (switch-like).

Replication control of a small cryptic plasmid of Escherichia coli

The role of the RepA initiator protein in replication and copy-number control of pKL1, a small cryptic plasmid of Escherichia coli, was elucidated. The identified ori region encompasses a copy-number control element (cop) and an active single-strand initiation signal (ssi), n'-pasH, which were essential for efficient plasmid replication. The cop region also harbors a region of plasmid incompatibility, inc, encompassing a stem-loop structure, the repA promoter, Prep, as well as two distinct RepA binding sites, BD-1 and BD-2. RepA was shown to bind to these sites quite differently, binding primarily as a monomer or dimer to BD-1 to initiate RepA transcription and plasmid replication, and as higher oligomers to BD-2 to autoregulate repA transcription, the balance being reflected in plasmid copy number. An active integration host factor (IHF) binding sequence was located in the cop region and plasmid replication was shown to be dependent on host IHF encoding genes himA and himD. Low concentrations of IHF predisposed the cop region to RepA binding, although when highly expressed in trans RepA effectively displaced bound IHF and it overcame IHF dependency. Incompatibility was shown to be due to the titration of RepA at the cop locus but could be easily overridden by excess RepA. Both RepA binding sites were required to maintain incompatibility and effective pKL1 replication. Neither antisense RNA nor iterons were found to be involved in pKL1 regulation, thus pKL1 is a novel example of autoregulation of DNA replication. When produced in excess from a helper plasmid, RepA induced pKL1 replication to unusually high levels (>2500 copies/cell). In addition, pKL1 replication could be artificially modulated and a wide range of copy numbers maintained.

Mutants of Tn3 resolvase which do not require accessory binding sites for recombination activity

Tn3 resolvase promotes site-specific recombination between two res sites, each of which has three resolvase dimer-binding sites. Catalysis of DNA-strand cleavage and rejoining occurs at binding site I, but binding sites II and III are required for recombination. We used an in vivo screen to detect resolvase mutants that were active on res sites with binding sites II and III deleted (that is, only site I remaining). Mutations of amino acids Asp102 (D102) or Met103 (M103) were sufficient to permit catalysis of recombination between site I and a full res, but not between two copies of site I. A double mutant resolvase, with a D102Y mutation and an additional activating mutation at Glu124 (E124Q), recombined substrates containing only two copies of site I, in vivo and in vitro. In these novel site Ixsite I reactions, product topology is no longer restricted to the normal simple catenane, indicating synapsis by random collision. Furthermore, the mutants have lost the normal specificity for directly repeated sites and supercoiled substrates; that is, they promote recombination between pairs of res sites in linear molecules, or in inverted repeat in a supercoiled molecule, or in separate molecules.

Mechanism of recruitment of DnaB helicase to the replication origin of the plasmid pSC101

Although many bacterial chromosomes require only one replication initiator protein, e.g., DnaA, most plasmid replicons depend on dual initiators: host-encoded DnaA and plasmid-encoded Rep initiator protein for replication initiation. Using the plasmid pSC101 as a model system, this work investigates the biological rationale for the requirement for dual initiators and shows that the plasmid-encoded RepA specifically interacts with the replicative helicase DnaB. Mutations in DnaB or RepA that disrupt RepA-DnaB interaction cause failure to load DnaB to the plasmid ori in vitro and to replicate the plasmid in vivo. Although, interaction of DnaA with DnaB could not substitute for RepA-DnaB interaction for helicase loading, DnaA along with integration host factor, DnaC, and RepA was essential for helicase loading. Therefore, DnaA is indirectly needed for helicase loading. Instead of a common surface of interaction with initiator proteins, interestingly, DnaB helicase appears to have at least a limited number of nonoverlapping surfaces, each of which interacts specifically with a different initiator protein.

Effects on mRNA degradation by Escherichia coli transcription termination factor Rho and pBR322 copy number control protein Rop

Mutants in Escherichia coli transcription termination factor Rho, termed rho(nusD), were previously isolated based on their ability to block the growth of bacteriophage T4. Here we show that rho(nusD) strains have decreased average half-lives for bulk cellular mRNA. Decreased E. coli message lifetimes could be because of increased ribonuclease activity in the rho mutant cells: if a Rho-dependent terminator precedes a ribonuclease gene, weaker termination in the rho mutants could lead to nuclease overexpression. However, inactivation of ribonuclease genes in rho026 cells did not relieve the defective phage growth. Unexpectedly, expression of the pBR322 Rop protein, a structure-specific, sequence-independent RNA-binding protein, in rho(nusD) cells restored the ability of T4 to grow and prolonged cellular message half-life in both the wild-type and the rho026 mutant. These results suggest that it is the RNA-binding ability of Rho rather than its transcription termination function that is important for the inhibition of bacteriophage growth and the shorter bulk mRNA lifetime. We propose that altered interaction of the mutant Rho with mRNA could make the RNA more susceptible to degradation. The inability of the RNA-binding proteins SrmB and DeaD to reverse the rho mutant phenotype when each is overexpressed implies that the required RNA interactions are specific. The results show novel roles for Rho and Rop in mRNA stability.

Isolation and sequencing of the replication region of Mycobacterium avium plasmid pLR7

The Mycobacterium avium plasmid pLR7 is representative of a group of small plasmids that are common in isolates from AIDS patients with disseminated M. avium infections. Determination of the functions of these and other plasmids has been hampered by the lack of methods for genetic manipulation of M. avium. In this study, the region of pLR7 capable of replication was identified and sequenced. Fragments of pLR7 were cloned into a pUC18 derivative carrying a kanamycin resistance marker and introduced into a plasmid-free M. avium strain by electroporation. The origin of replication was located on a 1.8-kb PvuII-to-SmaI fragment. An open reading frame encoding a putative Rep protein was identified. Two other open reading frames were identified in this region. A shuttle vector, pMB351, was constructed with the pLR7 origin of replication, pUC18, and the kanamycin resistance gene from Tn5. This vector was successfully transformed into M. avium, Mycobacterium tuberculosis, and Mycobacterium bovis.

Boundaries of the pSC101 minimal replicon are conditional

The DNA segment essential for plasmid replication commonly is referred to as the core or minimal replicon. We report here that host and plasmid genes and sites external to the core replicon of plasmid pSC101 determine the boundaries and competence of the replicon and also the efficiency of partitioning. Missense mutations in the plasmid-encoded RepA protein or mutation of the Escherichia coli topoisomerase I gene enable autonomous replication of a 310-bp pSC101 DNA fragment that contains only the actual replication origin plus binding sites for RepA and the host-encoded DnaA protein. However, in the absence of a repA or topA mutation, the DNA-bending protein integration host factor (IHF) and either of two cis-acting elements are required. One of these, the partitioning (par) locus, is known to promote negative DNA supercoiling; our data suggest that the effects of the other element, the inverted repeat (IR) sequences that overlap the repA promoter, are mediated through the IR's ability to bind RepA. The concentrations of RepA and DnaA, which interact with each other and with plasmid DNA in the origin region (T. T. Stenzel, T. MacAllister, and D. Bastia, Genes Dev. 5:1453-1463, 1991), also affect both replication and partitioning. Our results, which indicate that the sequence requirements for replication of pSC101 are conditional rather than absolute, compel reassessment of the definition of a core replicon. Additionally, they provide further evidence that the origin region RepA-DnaA-DNA complex initiating replication of pSC101 also mediates the partitioning of pSC101 plasmids at cell division.

Characterization of pPvu1, the autonomous plasmid from Proteus vulgaris that carries the genes of the PvuII restriction-modification system

Plasmid pPvu1 from Proteus vulgaris carries the genes of the PvuII restriction-modification system [Blumenthal et al., J. Bacteriol. 164 (1985) 501-509]. This report focuses on physical and functional features of the 4.84-kb plasmid, which shows a composite genetic architecture. Plasmid pPvu1 has a replication origin and an incompatibility locus that each function in Escherichia coli, and an apparent cer recombination site. The replication origin includes a possible RNA I gene, and the incompatibility locus closely resembles a rom gene. These loci show substantial sequence similarity to corresponding loci from the E. coli plasmids P15A, ColEI and pSC101, and closely flank the PvuII genes. The close association between a recombinational locus and the PvuII genes has implications for their mobility.

Repetitive plasmid sequences generate DNA fingerprinting patterns in mammals

Bacterial plasmids with stringently regulated copy numbers have directly repeated DNA sequences, termed iterons, in the vicinity of their replication origins. These sequences bind a specific protein exerting a key role in the initiation of plasmid replication. Plasmids P1, pSC101 and RFS1010 have different iteron sequences and belong to three different incompatibility groups. Used as DNA probes each of these plasmids generates specific patterns in mammals similar to those obtained by the DNA fingerprinting technique. The iteron-containing regions were identified as the part of the plasmids responsible for those patterns by using polymerase chain reaction (PCR) amplified DNA segments that contained the iteron regions as probes.

Plasmid pSC101 harbors a recombination site, psi, which is able to resolve plasmid multimers and to substitute for the analogous chromosomal Escherichia coli site dif

Plasmid pSC101 harbors a 28-bp sequence which is homologous to dif, the target site of the XerC/XerD-dependent recombination system in Escherichia coli. Using a technique which allows very sensitive detection of plasmid loss, we show that recombination at this site, termed psi for pSC101 stabilized inheritance, causes a moderate increase in pSC101 stability. The role of the psi sequence in site-specific recombination has been explored in two other contexts. It was cloned in a derivative of plasmid p15A and inserted into the chromosome in place of dif. In the first situation, psi activity requires accessory sequences and results in multimer resolution; in the second situation, it suppresses the effects of the dif deletion and can promote intermolecular exchanges. Thus, psi is a site whose recombinational activity depends on the context, the first in the cer/dif family known to exhibit such flexibility.

A locus involved in the regulation of replication in plasmid pSC101

The origin of replication of plasmid pSC101 contains three directly repeated sequences RS1, RS2, and RS3 separated by 22 bp from two palindromic sequences, IR1 and IR2, which are partially homologous to the direct repeats. These inverted repeat (IR) sequences overlap the promoter of the repA gene which encodes a protein essential for plasmid replication. We have shown that RepA binds to the RS sites as a monomer and to the IR sites as a dimer. The influence of the IR1 site, and of the DNA segment that separates it from RS3, on plasmid copy number control has been studied in detail. We show that the integrity of IR1 is essential for efficient replication and plasmid stability, the critical site extending to the left of IR1 proper. We also show that the presence of IR1 modifies profoundly the binding properties of purified RepA protein to a segment of DNA containing the RS sequences. IR1 is separated from its homologous site on RS3 by approximately four turns of the DNA helix. Replication is abolished if this distance is increased by half a turn of the helix but it is restored if the distance is increased by a whole turn. These results suggest a DNA looping interaction, in the initiation of replication, between the RepA dimer that binds IR1 and the RepA monomers that bind the RS sequences.

The partition (par) locus of pSC101 is an enhancer of plasmid incompatibility

The incompatibility that pSC101-derived plasmids express toward each other is mediated by directly repeated sequences (iterons) located near the plasmid's replication origin. We report here that the pSC101 par locus, which stabilizes plasmid inheritance in dividing cell populations and alters DNA superhelicity, can function as a cis-acting enhancer of incompatibility, which we show is determined jointly by the copy number of the plasmid and the number of iterons per copy. A single synthetic 32 bp iteron sequence carried by the pUC19 plasmid confers strong pSC101-specific incompatibility in the absence of any other pSC101 sites but requires the par locus to express strong incompatibility when carried by a lower-copy-number plasmid. We propose a model by which the par locus can enhance the apparently antagonistic processes of incompatibility and pSC101 DNA replication while concurrently facilitating plasmid distribution during cell division.

In vivo and in vitro studies of a copy number mutation of the RepA replication protein of plasmid pSC101

The RepA replication protein of plasmid pSC101 binds as a monomer to three repeated sequences (RS1, RS2, and RS3) in the replication origin of the plasmid to initiate duplication and binds as a dimer to two inversely repeated sequences (IR1 and IR2) in its promoter region (D. Manen, L. C. Upegui-Gonzalez, and L. Caro, Proc. Natl. Acad. Sci. USA 89:8923-8927, 1992). The binding to IR2 autoregulates repA transcription (P. Linder, G. Churchward, G. X. Xia, Y. Y. Yu, and L. Caro, J. Mol. Biol. 181:383-393, 1985). A mutation in the protein RepA(cop) that affects a single amino acid increases the plasmid copy number fourfold. In vivo experiments show that, when provided in trans under a foreign promoter, the RepA(cop) protein increases the replication of a plasmid containing the origin of replication without repA, whereas it decreases the repression of its own promoter. In vitro experiments show that the purified RepA(cop) protein binds more efficiently to the repeated sequences within the origin than does RepA and that its binding to these sequences is more specific than that of RepA. Binding to an inversely repeated sequence within the repA promoter gives opposite results: the wild-type protein binds efficiently to that sequence, whereas the mutated protein binds less efficiently and less specifically. Footprint experiments confirmed these results and, in addition, showed a difference in the pattern of protection of the inversely repeated sequences by the mutant protein. Equilibrium binding experiments showed that the formation of protein-probe complexes at increasing concentrations of protein had a sigmoidal shape for binding to RS sequences and a hyperbolic shape for binding to IR sequences. The results, together with earlier work (G.-X. Xia, D. Manen, T. Goebel, P. Linder, G. Churchward, and L. Caro, Mol. Microbiol. 5:631-640, 1991), confirm that the binding of RepA to RS sequences plays a crucial role in the regulation of plasmid replication and that its binding to IR sequences plays a role in the autoregulation of RepA expression. They also demonstrate that the two separate functions of the protein are effected by two different forms of binding to the target sites.

Plasmid pHH1 of Halobacterium salinarium: characterization of the replicon region, the gas vesicle gene cluster and insertion elements

The DNA sequence of the 5.7 kb plasmid pHH9 containing the replicon region of the 150 kb plasmid pHH1 from Halobacterium salinarium was determined. The minimal region necessary for stable plasmid maintenance lies within a 2.9 kb fragment, as defined by transformation experiments. The DNA sequence contained two open reading frames arranged in opposite orientations, separated by an unusually high AT-rich (60-70% A+T) sequence of 350 bp. All H. salinarium strains (H. halobium, H. cutirubrum) investigated harbour endogenous plasmids containing the pHH1 replicon; however, these pHH1-type plasmids differ by insertions and deletions. Adjacent to the replicon, and separated by a copy of each of the insertion elements ISH27 and ISH26, is the 9 kb p-vac region required for gas vesicle synthesis. Analysis of these and other ISH element copies in pHH1 revealed that most of them lack the target DNA duplication usually found with recently transposed ISH elements. These results underline the plasticity of plasmid pHH1.

Monomers and dimers of the RepA protein in plasmid pSC101 replication: domains in RepA

The replication of plasmid pSC101 requires the plasmid-encoded protein RepA. This protein has a double role: it binds to three directly repeated sequences in the pSC101 origin and promotes replication of the plasmid; it binds to two inversely repeated sequences in its promoter region and regulates its own transcription. A series of RepA protein derivatives carrying deletions of the C-terminal region were assayed for specific binding. We found that the last third of the protein is not needed for binding to the various specific sites. Truncated proteins that still bind can also form heterodimers with a wild-type protein. Analysis of band retardation assays conducted with wild-type and truncated proteins indicates that RepA binds to directly repeated sequences as a monomer and to inversely repeated sequences as a dimer.

Propagation of pSC101 plasmids defective in binding of integration host factor

Integration host factor (IHF), a multifunctional protein of E. coli, normally is required for the replication of plasmid pSC101. T. T. Stenzel, P. Patel, and D. Bastia (Cell 49:709-717, 1987) have reported that IHF binds to a DNA locus near the pSC101 replication origin and enhances a static bend present in this region; mutation of the IHF binding site affects the plasmid's ability to replicate. We report here studies indicating that the requirement for IHF binding near the pSC101 replication origin is circumvented partially or completely by (i) mutation of the plasmid-encoded repA (replicase) gene or the chromosomally encoded topA gene, (ii) the presence on the plasmid of the pSC101 partition (par) locus, or (iii) replacement of the par locus by a strong transcriptional promoter. With the exception of the repA mutation, the factors that substitute for a functional origin region IHF binding site are known to alter plasmid topology by increasing negative DNA supercoiling, as does IHF itself. These results are consistent with the proposal that IHF binding near the pSC101 replication origin promotes plasmid replication by inducing a conformational change leading to formation of a repA-dependent DNA-protein complex. A variety of IHF-independent mechanisms can facilitate formation of the putative replication-initiation complex.

Genetic and functional analysis of the basic replicon of pPS10, a plasmid specific for Pseudomonas isolated from Pseudomonas syringae patovar savastanoi

The sequence of a 1823 base-pair region containing the replication functions of pPS10, a narrow host-range plasmid isolated from a strain of Pseudomonas savastanoi, is reported. The origin of replication, oriV, or pPS10 is contained in a 535 base-pair fragment of this sequence that can replicate in the presence of trans-acting function(s) of the plasmid. oriV contains four iterons of 22 base-pairs that are preceded by G+C-rich and A+T-rich regions. A dnaA box located adjacent to the repeats of the origin is dispensable but required for efficient replication of pPS10; A and T are equivalent bases at the 5' end of the box. repA, the gene of a trans-acting replication protein of 26,700 Mr has been identified by genetic and functional analysis. repA is adjacent to the origin of replication and is preceded by the consensus sequences of a typical sigma 70 promoter of Escherichia coli. The RepA protein has been identified, using the minicell system of E. coli, as a polypeptide with an apparent molecular mass of 26,000. A minimal pPS10 replicon has been defined to a continuous 1267 base-pair region of pPS10 that includes the oriV and repA sequences.

Replication origin mutations affecting binding of pSC101 plasmid-encoded Rep initiator protein

To investigate the role of binding sites for Rep initiation protein in the replication of pSC101, a series of plasmids was constructed which carried different combinations of mutations in three binding sites within the minimal origin of replication. Mutation of all three sites reduced the affinity of purified Rep protein for the origin by 100-fold, as measured by a competition binding assay. Mutations in individual binding sites prevented binding of Rep protein to the mutant site but not to adjacent wild-type sites. Transformation efficiency, copy number, and stability over 150 generations were measured for each of the mutant plasmids. Unlike other similar plasmids related to pSC101, the Rep binding sites were found not to be equivalent. A mutation in the site RS1, proximal to repeated sequences which serve as DnaB helicase entry sites in oriC, had a severe effect on replication activity. A similar mutation in the distal site RS3 caused a reduction in copy number, but the mutant plasmid was stably maintained despite a broadened distribution of copy number within the population. A mutation in the middle RS2 site had no significant effect on pSC101 replication.