The general protein-export pathway is directly required for extracellular pullulanase secretion in Escherichia coli K12

Multi-omics analysis of excessive nitrogen fertilizer application: Assessing environmental damage and solutions in potato farming

Potatoes (Solanum tuberosum L.) are the third largest food crop globally and are pivotal for global food security. Widespread N fertilizer waste in potato cultivation has caused diverse environmental issues. This study employed microbial metagenomic sequencing to analyze the causes behind the declining N use efficiency (NUE) and escalating greenhouse gas emissions resulting from excessive N fertilizer application. Addressing N fertilizer inefficiency through breeding has emerged as a viable solution for mitigating overuse in potato cultivation. In this study, transcriptome and metabolome analyses were applied to identify N fertilizer-responsive genes. Metagenomic sequencing revealed that excessive N fertilizer application triggered alterations in the population dynamics of 11 major bacterial phyla, consequently affecting soil microbial functions, particularly N metabolism pathways and bacterial secretion systems. Notably, the enzyme levels associated with NO3- increased, and those associated with NO and N2O increased. Furthermore, excessive N fertilizer application enhanced soil virulence factors and increased potato susceptibility to diseases. Transcriptome and metabolome sequencing revealed significant impacts of excessive N fertilizer use on lipid and amino acid metabolism pathways. Weighted gene co‑expression network analysis (WGCNA) was adopted to identify two genes associated with N fertilizer response: PGSC0003DMG400021157 and PGSC0003DMG400009544.

Genomic evidence for the first symbiotic Deferribacterota, a novel gut symbiont from the deep-sea hydrothermal vent shrimp Rimicaris kairei

The genus Rimicaris is the dominant organism living in hydrothermal vents. However, little research has been done on the functions of their intestinal flora. Here, we investigated the potential functions of Deferribacterota, which is dominant in the intestine of Rimicaris kairei from the Central Indian Ridge. In total, six metagenome-assembled genomes (MAGs) of Deferribacterota were obtained using the metagenomic approach. The six Deferribacterota MAGs (Def-MAGs) were clustered into a new branch in the phylogenetic tree. The six Def-MAGs were further classified into three species, including one new order and two new genera, based on the results of phylogenetic analysis, relative evolutionary divergence (RED), average nucleotide identity (ANI), average amino acid identity (AAI) and DNA-DNA hybridization (DDH) values. The results of the energy metabolism study showed that these bacteria can use a variety of carbon sources, such as glycogen, sucrose, salicin, arbutin, glucose, cellobiose, and maltose. These bacteria have a type II secretion system and effector proteins that can transport some intracellular toxins to the extracellular compartment and a type V CRISPR-Cas system that can defend against various invasions. In addition, cofactors such as biotin, riboflavin, flavin mononucleotide (FMN), and flavin adenine dinucleotide (FAD) synthesized by R. kairei gut Deferribacterota may also assist their host in surviving under extreme conditions. Taken together, the potential function of Deferribacterota in the hydrothermal R. kairei gut suggests its long-term coevolution with the host.

InvL, an Invasin-Like Adhesin, Is a Type II Secretion System Substrate Required for Acinetobacter baumannii Uropathogenesis

Acinetobacter baumannii is an opportunistic pathogen of growing concern, as isolates are commonly multidrug resistant. While A. baumannii is most frequently associated with pulmonary infections, a significant proportion of clinical isolates come from urinary sources, highlighting its uropathogenic potential. The type II secretion system (T2SS) of commonly used model Acinetobacter strains is important for virulence in various animal models, but the potential role of the T2SS in urinary tract infection (UTI) remains unknown. Here, we used a catheter-associated UTI (CAUTI) model to demonstrate that a modern urinary isolate, UPAB1, requires the T2SS for full virulence. A proteomic screen to identify putative UPAB1 T2SS effectors revealed an uncharacterized lipoprotein with structural similarity to the intimin-invasin family, which serve as type V secretion system (T5SS) adhesins required for the pathogenesis of several bacteria. This protein, designated InvL, lacked the β-barrel domain associated with T5SSs but was confirmed to require the T2SS for both surface localization and secretion. This makes InvL the first identified T2SS effector belonging to the intimin-invasin family. InvL was confirmed to be an adhesin, as the protein bound to extracellular matrix components and mediated adhesion to urinary tract cell lines in vitro. Additionally, the invL mutant was attenuated in the CAUTI model, indicating a role in Acinetobacter uropathogenesis. Finally, bioinformatic analyses revealed that InvL is present in nearly all clinical isolates belonging to international clone 2, a lineage of significant clinical importance. In all, we conclude that the T2SS substrate InvL is an adhesin required for A. baumannii uropathogenesis. IMPORTANCE While pathogenic Acinetobacter can cause various infections, we recently found that 20% of clinical isolates come from urinary sources. Despite the clinical relevance of Acinetobacter as a uropathogen, few virulence factors involved in urinary tract colonization have been defined. Here, we identify a novel type II secretion system effector, InvL, which is required for full uropathogenesis by a modern urinary isolate. Although InvL has predicted structural similarity to the intimin-invasin family of autotransporter adhesins, InvL is predicted to be anchored to the membrane as a lipoprotein. Similar to other invasin homologs, however, we demonstrate that InvL is a bona fide adhesin capable of binding extracellular matrix components and mediating adhesion to urinary tract cell lines. In all, this work establishes InvL as an adhesin important for Acinetobacter's urinary tract virulence and represents the first report of a type II secretion system effector belonging to the intimin-invasin family.

The structure and mechanism of the bacterial type II secretion system

The type II secretion system (T2SS) is a multi-protein complex used by many bacteria to move substrates across their cell membrane. Substrates released into the environment serve as local and long-range effectors that promote nutrient acquisition, biofilm formation, and pathogenicity. In both animals and plants, the T2SS is increasingly recognized as a key driver of virulence. The T2SS spans the bacterial cell envelope and extrudes substrates through an outer membrane secretin channel using a pseudopilus. An inner membrane assembly platform and a cytoplasmic motor controls pseudopilus assembly. This microreview focuses on the structure and mechanism of the T2SS. Advances in cryo-electron microscopy are enabling increasingly elaborate sub-complexes to be resolved. However, key questions remain regarding the mechanism of pseudopilus extension and retraction, and how this is coupled with the choreography of the substrate moving through the secretion system. The T2SS is part of an ancient type IV filament superfamily that may have been present within the last universal common ancestor (LUCA). Overall, mechanistic principles that underlie T2SS function have implication for other closely related systems such as the type IV and tight adherence pilus systems.

Architecture, Function, and Substrates of the Type II Secretion System

The type II secretion system (T2SS) delivers toxins and a range of hydrolytic enzymes, including proteases, lipases, and carbohydrate-active enzymes, to the cell surface or extracellular space of Gram-negative bacteria. Its contribution to survival of both extracellular and intracellular pathogens as well as environmental species of proteobacteria is evident. This dynamic, multicomponent machinery spans the entire cell envelope and consists of a cytoplasmic ATPase, several inner membrane proteins, a periplasmic pseudopilus, and a secretin pore embedded in the outer membrane. Despite the trans-envelope configuration of the T2S nanomachine, proteins to be secreted engage with the system first once they enter the periplasmic compartment via the Sec or TAT export system. Thus, the T2SS is specifically dedicated to their outer membrane translocation. The many sequence and structural similarities between the T2SS and type IV pili suggest a common origin and argue for a pilus-mediated mechanism of secretion. This minireview describes the structures, functions, and interactions of the individual T2SS components and the general architecture of the assembled T2SS machinery and briefly summarizes the transport and function of a growing list of T2SS exoproteins. Recent advances in cryo-electron microscopy, which have led to an increased understanding of the structure-function relationship of the secretin channel and the pseudopilus, are emphasized.

Direct interactions between the secreted effector and the T2SS components GspL and GspM reveal a new effector-sensing step during type 2 secretion

In many Gram-negative bacteria, the type 2 secretion system (T2SS) plays an important role in virulence because of its capacity to deliver a large amount of fully folded protein effectors to the extracellular milieu. Despite our knowledge of most T2SS components, the mechanisms underlying effector recruitment and secretion by the T2SS remain enigmatic. Using complementary biophysical and biochemical approaches, we identified here two direct interactions between the secreted effector CbpD and two components, XcpY_L and XcpZ_M, of the T2SS assembly platform (AP) in the opportunistic pathogen Pseudomonas aeruginosa Competition experiments indicated that CbpD binding to XcpY_L is XcpZ_M-dependent, suggesting sequential recruitment of the effector by the periplasmic domains of these AP components. Using a bacterial two-hybrid system, we then tested the influence of the effector on the AP protein-protein interaction network. Our findings revealed that the presence of the effector modifies the AP interactome and, in particular, induces XcpZ_M homodimerization and increases the affinity between XcpY_L and XcpZ_M The observed direct relationship between effector binding and T2SS dynamics suggests an additional synchronizing step during the type 2 secretion process, where the activation of the AP of the T2SS nanomachine is triggered by effector binding.

Using Cryo-EM to Investigate Bacterial Secretion Systems

Bacterial secretion systems are responsible for releasing macromolecules to the extracellular milieu or directly into other cells. These membrane complexes are associated with pathogenicity and bacterial fitness. Understanding of these large assemblies has exponentially increased in the last few years thanks to electron microscopy. In fact, a revolution in this field has led to breakthroughs in characterizing the structures of secretion systems and other macromolecular machineries so as to obtain high-resolution images of complexes that could not be crystallized. In this review, we give a brief overview of structural advancements in the understanding of secretion systems, focusing in particular on cryo-electron microscopy, whether tomography or single-particle analysis. We describe how such techniques have contributed to knowledge of the mechanism of macromolecule secretion in bacteria and the impact they will have in the future.

Molecular motors in bacterial secretion

Secretion of effectors across bacterial membranes is usually mediated by large multisubunit complexes. In most cases, the secreted effectors are virulent factors normally associated to pathogenic diseases. The biogenesis of these secretion systems and the transport of the effectors are processes that require energy. This energy could be directly obtained by using the proton motive force, but in most cases the energy associated to these processes is derived from ATP hydrolysis. Here, a description of the machineries involved in generating the energy required for system biogenesis and substrate transport by type II, III and IV secretion systems is provided, with special emphasis on highlighting the structural similarities and evolutionary relationships among the secretion ATPases.

Involvement of the GspAB complex in assembly of the type II secretion system secretin of Aeromonas and Vibrio species

The type II secretion system (T2SS) functions as a transport mechanism to translocate proteins from the periplasm to the extracellular environment. The ExeA homologue in Aeromonas hydrophila, GspA(Ah), is an ATPase that interacts with peptidoglycan and forms an inner membrane complex with the ExeB homologue (GspB(Ah)). The complex may be required to generate space in the peptidoglycan mesh that is necessary for the transport and assembly of the megadalton-sized ExeD homologue (GspD(Ah)) secretin multimer in the outer membrane. In this study, the requirement for GspAB in the assembly of the T2SS secretin in Aeromonas and Vibrio species was investigated. We have demonstrated a requirement for GspAB in T2SS assembly in Aeromonas salmonicida, similar to that previously observed in A. hydrophila. In the Vibrionaceae species Vibrio cholerae, Vibrio vulnificus, and Vibrio parahaemolyticus, gspA mutations significantly decreased assembly of the secretin multimer but had minimal effects on the secretion of T2SS substrates. The lack of effect on secretion of the mutant of gspA of V. cholerae (gspA(Vc)) was explained by the finding that native secretin expression greatly exceeds the level needed for efficient secretion in V. cholerae. In cross-complementation experiments, secretin assembly and secretion in an A. hydrophila gspA mutant were partially restored by the expression of GspAB from V. cholerae in trans, further suggesting that GspAB(Vc) performs the same role in Vibrio species as GspAB(Ah) does in the aeromonads. These results indicate that the GspAB complex is functional in the assembly of the secretin in Vibrio species but that a redundancy of GspAB function may exist in this genus.

Biogenesis and Membrane Targeting of Lipoproteins

Bacterial lipoproteins represent a unique class of membrane proteins, which are anchored to membranes through triacyl chains attached to the amino-terminal cysteine. They are involved in various functions localized in cell envelope. Escherichia coli possesses more than 90 species of lipoproteins, most of which are localized in the outer membrane, with others being in the inner membrane. All lipoproteins are synthesized in the cytoplasm with an N-terminal signal peptide, translocated across the inner membrane by the Sec translocon to the periplasmic surface of the inner membrane, and converted to mature lipoproteins through sequential reactions catalyzed by three lipoprotein-processing enzymes: Lgt, LspA, and Lnt. The sorting of lipoproteins to the outer membrane requires a system comprising five Lol proteins. An ATP-binding cassette transporter, LolCDE, initiates the sorting by mediating the detachment of lipoproteins from the inner membrane. Formation of the LolA-lipoprotein complex is coupled to this LolCDE-dependent release reaction. LolA accommodates the amino-terminal acyl chain of lipoproteins in its hydrophobic cavity, thereby generating a hydrophilic complex that can traverse the periplasmic space by diffusion. Lipoproteins are then transferred to LolB on the outer membrane and anchored to the inner leaflet of the outer membrane by the action of LolB. In contrast, since LolCDE does not recognize lipoproteins possessing Asp at position +2, these lipoproteins remain anchored to the inner membrane. Genes for Lol proteins are widely conserved among gram-negative bacteria, and Lol-mediated outer membrane targeting of lipoproteins is considered to be the general lipoprotein localization mechanism.

Multiple signals direct the assembly and function of a type 1 secretion system

Type 1 secretion systems (T1SS) are present in a wide range of Gram-negative bacteria and are involved in the secretion of diverse substrates such as proteases, lipases, and hemophores. T1SS consist of three proteins: an inner membrane ABC (ATP binding cassette) protein, a periplasmic adaptor, and an outer membrane channel of the TolC family. Assembly of the tripartite complex is transient and induced upon binding of the substrate to the ABC protein. It is generally accepted that T1SS-secreted proteins have a C-terminal secretion signal required for secretion and that this signal interacts with the ABC protein. However, we have previously shown that for the Serratia marcescens hemophore HasA, interactions with the ABC protein and subsequent T1SS assembly require additional regions. In this work, we characterize these regions and demonstrate that they are numerous, distributed throughout the HasA polypeptide, and most likely linear. Together with the C-terminal signal, these elements maximize the secretion of HasA. The data also show that the C-terminal signal of HasA triggers HasD-driven ATP hydrolysis, leading to disassembly of the complex. These data support a model of type 1 secretion involving a multistep interaction between the substrate and the ABC protein that stabilizes the assembled secretion system until the C terminus is presented. This model also supports tight coupling between synthesis and secretion.

Expression, purification, crystallization and preliminary X-ray studies of Vibrio cholerae pseudopilin EpsH

EpsH is a minor pseudopilin protein of the Vibrio cholerae type II secretion system. A truncated form of EpsH with a C-terminal noncleavable His tag was constructed and expressed in Escherichia coli, purified and crystallized by sitting-drop vapor diffusion. A complete data set was collected to 1.71 A resolution. The crystals belonged to space group P2(1)2(1)2(1), with unit-cell parameters a = 53.39, b = 71.11, c = 84.64 A. There were two protein molecules in the asymmetric unit, which gave a Matthews coefficient V(M) of 2.1 A(3) Da(-1), corresponding to 41.5% solvent content.

Docking and assembly of the type II secretion complex of Vibrio cholerae

Secretion of cholera toxin and other virulence factors from Vibrio cholerae is mediated by the type II secretion (T2S) apparatus, a multiprotein complex composed of both inner and outer membrane proteins. To better understand the mechanism by which the T2S complex coordinates translocation of its substrates, we are examining the protein-protein interactions of its components, encoded by the extracellular protein secretion (eps) genes. In this study, we took a cell biological approach, observing the dynamics of fluorescently tagged EpsC and EpsM proteins in vivo. We report that the level and context of fluorescent protein fusion expression can have a bold effect on subcellular location and that chromosomal, intraoperon expression conditions are optimal for determining the intracellular locations of fusion proteins. Fluorescently tagged, chromosomally expressed EpsC and EpsM form discrete foci along the lengths of the cells, different from the polar localization for green fluorescent protein (GFP)-EpsM previously described, as the fusions are balanced with all their interacting partner proteins within the T2S complex. Additionally, we observed that fluorescent foci in both chromosomal GFP-EpsC- and GFP-EpsM-expressing strains disperse upon deletion of epsD, suggesting that EpsD is critical to the localization of EpsC and EpsM and perhaps their assembly into the T2S complex.

Type II secretion system secretin PulD localizes in clusters in the Escherichia coli outer membrane

The cellular localization of a chimera formed by fusing a monomeric red fluorescent protein to the C terminus of the Klebsiella oxytoca type II secretion system outer membrane secretin PulD (PulD-mCherry) in Escherichia coli was determined in vivo by fluorescence microscopy. Like PulD, PulD-mCherry formed sodium dodecyl sulfate- and heat-resistant multimers and was functional in pullulanase secretion. Chromosome-encoded PulD-mCherry formed fluorescent foci on the periphery of the cell in the presence of high (plasmid-encoded) levels of its cognate chaperone, the pilotin PulS. Subcellular fractionation demonstrated that the chimera was located exclusively in the outer membrane under these circumstances. A similar localization pattern was observed by fluorescence microscopy of fixed cells treated with green fluorescent protein-tagged affitin, which binds with high affinity to an epitope in the N-terminal region of PulD. At lower levels of (chromosome-encoded) PulS, PulD-mCherry was less stable, was located mainly in the inner membrane, from which it could not be solubilized with urea, and did not induce the phage shock response, unlike PulD in the absence of PulS. The fluorescence pattern of PulD-mCherry under these conditions was similar to that observed when PulS levels were high. The complete absence of PulS caused the appearance of bright and almost exclusively polar fluorescent foci.

Green fluorescent chimeras indicate nonpolar localization of pullulanase secreton components PulL and PulM

The Klebsiella oxytoca pullulanase secreton (type II secretion system) components PulM and PulL were tagged at their N termini with green fluorescent protein (GFP), and their subcellular location was examined by fluorescence microscopy and fractionation. When produced at moderate levels without other secreton components in Escherichia coli, both chimeras were envelope associated, as are the native proteins. Fluorescent GFP-PulM was evenly distributed over the cell envelope, with occasional brighter foci. Under the same conditions, GFP-PulL was barely detectable in the envelope by fluorescence microscopy. When produced together with all other secreton components, GFP-PulL exhibited circumferential fluorescence, with numerous brighter patches. The envelope-associated fluorescence of GFP-PulL was almost completely abolished when native PulL was also produced, suggesting that the chimera cannot compete with PulL for association with other secreton components. The patches of GFP-PulL might represent functional secretons, since GFP-PulM also appeared in similar patches. GFP-PulM and GFP-PulL both appeared in spherical polar foci when made at high levels. In K. oxytoca, GFP-PulM was evenly distributed over the cell envelope, with few patches, whereas GFP-PulL showed only weak envelope-associated fluorescence. These data suggest that, in contrast to their Vibrio cholerae Eps secreton counterparts (M. Scott, Z. Dossani, and M. Sandkvist, Proc. Natl. Acad. Sci. USA 98:13978-13983, 2001), PulM and PulL do not localize specifically to the cell poles and that the Pul secreton is distributed over the cell surface.

Role of XcpP in the functionality of the Pseudomonas aeruginosa secreton

In gram-negative bacteria, most signal-peptide-dependent exoproteins are secreted via the type II secretion system (T2SS or secreton). In Pseudomonas aeruginosa, T2SS consists of twelve Xcp proteins (XcpA and XcpP to XcpZ) thought to be organized as a multiproteic complex within the envelope. Although well conserved, T2SS are known to be species-specific, namely for distant organisms, and this characteristic was thought to involve XcpP. To check which domain of XcpP could be involved in the species specificity, hybrid proteins were generated using protein domain swapping between P. aeruginosa XcpP and homolog proteins of either Erwinia chrysanthemi or Pseudomonas alcaligenes. The results obtained with hybrid proteins constructed by exchanging the C-terminal domains of P. aeruginosa and E. chrysanthemi suggested that XcpP interacts with XcpQ, probably via its C-terminal domain. More interestingly, the data obtained with a hybrid protein containing the C-terminal part of the P. alcaligenes XcpP homolog, showed that the wild-type C-terminal end plays a very important role in the function of the protein and is required both for a correct interaction with XcpQ and for modulating the opening of the secreton channel.

Towards the identification of type II secretion signals in a nonacylated variant of pullulanase from Klebsiella oxytoca

Pullulanase (PulA) from the gram-negative bacterium Klebsiella oxytoca is a 116-kDa surface-anchored lipoprotein of the isoamylase family that allows growth on branched maltodextrin polymers. PulA is specifically secreted via a type II secretion system. PelBsp-PulA, a nonacylated variant of PulA made by replacing the lipoprotein signal peptide (sp) with the signal peptide of pectate lyase PelB from Erwinia chrysanthemi, was efficiently secreted into the medium. Two 80-amino-acid regions of PulA, designated A and B, were previously shown to promote secretion of beta-lactamase (BlaM) and endoglucanase CelZ fused to the C terminus. We show that A and B fused to the PelB signal peptide can also promote secretion of BlaM and CelZ but not that of nuclease NucB or several other reporter proteins. However, the deletion of most of region A or all of region B, either individually or together, had only a minor effect on PelBsp-PulA secretion. Four independent linker insertions between amino acids 234 and 324 in PelBsp-PulA abolished secretion. This part of PulA, region C, could contain part of the PulA secretion signal or be important for its correct presentation. Deletion of region C abolished PelBsp-PulA secretion without dramatically affecting its stability. PelBsp-PulA-NucB chimeras were secreted only if the PulA-NucB fusion point was located downstream from region C. The data show that at least three regions of PulA contain information that influences its secretion, depending on their context, and that some reporter proteins might contribute to the secretion of chimeras of which they are a part.

Subcomplexes from the Xcp secretion system of Pseudomonas aeruginosa

In Gram-negative bacteria, most of the sec-dependent exoproteins are secreted via the type II secretion system (T2SS or secreton). In Pseudomonas aeruginosa, T2SS consists of 12 Xcp proteins (XcpA and XcpP to XcpZ) organized as a multiproteic complex within the envelope. In this study, by a co-purification approach using a His-tagged XcpZ as a bait, XcpY and XcpZ were found associated together to constitute the most stable functional unit so far isolated from the P. aeruginosa secreton. This subcomplex was also found to interact with XcpR and XcpS to form a XcpRSYZ complex which was isolated under native conditions. Another component, XcpP was not found to be associated to the complex but the results suggest that it can transiently interact with the XcpYZ subcomplex in vivo.

Structural insights into the secretin PulD and its trypsin-resistant core

Limited proteolysis, secondary structure and biochemical analyses, mass spectrometry, and mass measurements by scanning transmission electron microscopy were combined with cryo-electron microscopy to generate a three-dimensional model of the homomultimeric complex formed by the outer membrane secretin PulD, an essential channel-forming component of the type II secretion system from Klebsiella oxytoca. The complex is a dodecameric structure composed of two rings that sandwich a closed disc. The two rings form chambers on either side of a central plug that is part of the middle disc. The PulD polypeptide comprises two major, structurally quite distinct domains; an N domain, which forms the walls of one of the chambers, and a trypsin-resistant C domain, which contributes to the outer chamber, the central disc, and the plug. The C domain contains a lower proportion of potentially transmembrane beta-structure than classical outer membrane proteins, suggesting that only a small part of it is embedded within the outer membrane. Indeed, the C domain probably extends well beyond the confines of the outer membrane bilayer, forming a centrally plugged channel that penetrates both the peptidoglycan on the periplasmic side and the lipopolysaccharide and capsule layers on the cell surface. The inner chamber is proposed to constitute a docking site for the secreted exoprotein pullulanase, whereas the outer chamber could allow displacement of the plug to open the channel and permit the exoprotein to escape.

Differential expression of genes that harbor a common regulatory element in Neisseria meningitidis upon contact with target cells

The expression of several genes in Neisseria meningitidis upon contact with epithelial cells was associated with the presence of the contact regulatory elements of NEISSERIA: These genes are involved in various aspects of meningococcal biology and could be coordinately regulated upon contact with target cells.

Type II secretion by Aeromonas salmonicida: evidence for two periplasmic pools of proaerolysin

Aeromonas salmonicida containing the cloned gene for proaerolysin secretes the protein via the type II secretory pathway. Here we show that altering a region near the beginning of aerA led to a dramatic increase in the amount of proaerolysin that was produced and that a large amount of the protein was cell associated. All of the cell-associated protein had crossed the cytoplasmic membrane, because the signal sequence had been removed, and all of it was accessible to processing by trypsin during osmotic shock. Enlargement of the periplasm was observed by electron microscopy in overproducing cells, likely caused by the osmotic effect of the very large concentrations of accumulated proaerolysin. Immunogold electron microscopy localized nearly all of the proaerolysin in the enlarged periplasm; however, only half of the protoxin was released from the cells by osmotic shocking. Cross-linking studies showed that this fraction contained normal dimeric proaerolysin but that proaerolysin in the fraction that was not shockable had not dimerized, although it appeared to be correctly folded. Both periplasmic fractions were secreted by the cells; however, the nonshockable fraction was secreted much more slowly than the shockable fraction. We estimated a rate for maximal secretion of proaerolysin from the bacteria that was much lower than the rates that have been estimated for inner membrane transit, which suggests that transit across the outer membrane is rate limiting and may account for the periplasmic accumulation of the protein. Finally, we show that overproduction of proaerolysin inhibited the release of the protease that is secreted by A. salmonicida.

Exchange of Xcp (Gsp) secretion machineries between Pseudomonas aeruginosa and Pseudomonas alcaligenes: species specificity unrelated to substrate recognition

Pseudomonas aeruginosa and Pseudomonas alcaligenes are gram-negative bacteria that secrete proteins using the type II or general secretory pathway, which requires at least 12 xcp gene products (XcpA and XcpP to -Z). Despite strong conservation of this secretion pathway, gram-negative bacteria usually cannot secrete exoproteins from other species. Based on results obtained with Erwinia, it has been proposed that the XcpP and/or XcpQ homologs determine this secretion specificity (M. Linderberg, G. P. Salmond, and A. Collmer, Mol. Microbiol. 20:175-190, 1996). In the present study, we report that XcpP and XcpQ of P. alcaligenes could not substitute for their respective P. aeruginosa counterparts. However, these complementation failures could not be correlated to species-specific recognition of exoproteins, since these bacteria could secrete exoproteins of each other. Moreover, when P. alcaligenes xcpP and xcpQ were expressed simultaneously in a P. aeruginosa xcpPQ deletion mutant, complementation was observed, albeit only on agar plates and not in liquid cultures. After growth in liquid culture the heat-stable P. alcaligenes XcpQ multimers were not detected, whereas monomers were clearly visible. Together, our results indicate that the assembly of a functional Xcp machinery requires species-specific interactions between XcpP and XcpQ and between XcpP or XcpQ and another, as yet uncharacterized component(s).

Signal peptide-dependent protein transport in Bacillus subtilis: a genome-based survey of the secretome

One of the most salient features of Bacillus subtilis and related bacilli is their natural capacity to secrete a variety of proteins into their environment, frequently to high concentrations. This has led to the commercial exploitation of bacilli as major "cell factories" for secreted enzymes. The recent sequencing of the genome of B. subtilis has provided major new impulse for analysis of the molecular mechanisms underlying protein secretion by this organism. Most importantly, the genome sequence has allowed predictions about the composition of the secretome, which includes both the pathways for protein transport and the secreted proteins. The present survey of the secretome describes four distinct pathways for protein export from the cytoplasm and approximately 300 proteins with the potential to be exported. By far the largest number of exported proteins are predicted to follow the major "Sec" pathway for protein secretion. In contrast, the twin-arginine translocation "Tat" pathway, a type IV prepilin-like export pathway for competence development, and ATP-binding cassette transporters can be regarded as "special-purpose" pathways, through which only a few proteins are transported. The properties of distinct classes of amino-terminal signal peptides, directing proteins into the various protein transport pathways, as well as the major components of each pathway are discussed. The predictions and comparisons in this review pinpoint important differences as well as similarities between protein transport systems in B. subtilis and other well-studied organisms, such as Escherichia coli and the yeast Saccharomyces cerevisiae. Thus, they may serve as a lead for future research and applications.

GSP-dependent protein secretion in gram-negative bacteria: the Xcp system of Pseudomonas aeruginosa

Bacteria have evolved several secretory pathways to release proteins into the extracellular medium. In Gram-negative bacteria, the exoproteins cross a cell envelope composed of two successive hydrophobic barriers, the cytoplasmic and outer membranes. In some cases, the protein is translocated in a single step across the cell envelope, directly from the cytoplasm to the extracellular medium. In other cases, outer membrane translocation involves an extension of the signal peptide-dependent pathway for translocation across the cytoplasmic membrane via the Sec machinery. By analogy with the so-called general export pathway (GEP), this latter route, including two separate steps across the inner and the outer membrane, was designated as the general secretory pathway (GSP) and is widely conserved among Gram-negative bacteria. In their great majority, exoproteins use the main terminal branch (MTB) of the GSP, namely the Xcp machinery in Pseudomonas aeruginosa, to reach the extracellular medium. In this review, we will use the P. aeruginosa Xcp system as a basis to discuss multiple aspects of the GSP mechanism, including machinery assembly, exoprotein recognition, energy requirement and pore formation for driving through the outer membrane.

Linkage map of Escherichia coli K-12, edition 10: the traditional map

This map is an update of the edition 9 map by Berlyn et al. (M. K. B. Berlyn, K. B. Low, and K. E. Rudd, p. 1715-1902, in F. C. Neidhardt et al., ed., Escherichia coli and Salmonella: cellular and molecular biology, 2nd ed., vol. 2, 1996). It uses coordinates established by the completed sequence, expressed as 100 minutes for the entire circular map, and adds new genes discovered and established since 1996 and eliminates those shown to correspond to other known genes. The latter are included as synonyms. An alphabetical list of genes showing map location, synonyms, the protein or RNA product of the gene, phenotypes of mutants, and reference citations is provided. In addition to genes known to correspond to gene sequences, other genes, often older, that are described by phenotype and older mapping techniques and that have not been correlated with sequences are included.

Macromolecular assembly and secretion across the bacterial cell envelope: type II protein secretion systems

A decade ago, Pugsley and colleagues reported the existence of a large region of Klebsiella DNA, distinct from the Klebsiella gene encoding pullulanase, which was necessary for secretion of this enzyme to the cell surface in Escherichia coli (d'Enfert et al., 1987a,b). The pul genes it contained proved to be the tip of an iceberg. The sequences reported before 1992 (d'Enfert et al., 1987a,b; d'Enfert & Pugsley, 1989; Pugsley & Reyss, 1990; Reyss & Pugsley, 1990) included only one gene (pulD) that matched any sequence in the data base; a 220 amino acid residue segment of PulD was 32% identical with a portion of the filamentous phage-encoded protein, pIV. But by the time the sequence of the 18.8 kb DNA fragment that contained the pul genes had been completed (Possot et al., 1992), reports of sets of homologous genes in several species of Gram-negative plant and animal pathogens had appeared. For the most part, these gene clusters were cloned by their ability to complement mutants that produced, but failed to secrete, proteins normally found in the extracellular milieu; when tested, the mutants showed reduced pathogenicity or were totally avirulent. The secreted proteins included hydrolytic enzymes such as cellulase and pectinase from plant pathogens, and proteases and toxins from animal pathogens. The multi-gene family necessary for secretion of these enzymes is now known as the type II system or the main terminal branch (MTB) of the general secretion pathway (GSP). As summarized by Pugsley et al. (1997), the current tally includes type II systems from Klebsiella oxytoca (pul), Erwinia chrysanthemi and carotovora (out), Xanthomonas campestris (xps), Pseudomonas aeruginosa (xcp), Aeromonas hydrophila (exe), and Vibrio cholerae (eps). A second type II system (sps) necessary for deposition of the S-layer on the cell surface in A. hydrophila is more similar to the X. campestris than A. hydrophila genes (Thomas & Trust, 1995). The biggest surprise has been the discovery of a complete set of type II secretion genes in E. coli K12. The E. coli genes are not expressed under normal growth conditions, and a search is underway to find inducing conditions and secretion substrates (Francetic & Pugsley, 1996). Impressive progress has already been made in defining components of the pathway. What remains to be understood in mechanistic detail is how this protein secretion system functions.

The requirement for DsbA in pullulanase secretion is independent of disulphide bond formation in the enzyme

Results from previous studies have suggested that an intramolecular disulphide bond in the exoprotein pullulanase is needed for its recognition and transport across the outer membrane. This interpretation of the data is shown here to be incorrect: pullulanase devoid of all potential disulphide bonds is secreted with apparently the same efficiency as the wild-type protein. Furthermore, the periplasmic disulphide bond, oxidoreductase DsbA, previously shown to catalyse the formation of a disulphide bond in pullulanase and to decrease its transit time in the periplasm, is shown here to be required for the rapid secretion of pullulanase devoid of disulphide bonds. Several possible explanations for the role of DsbA in pullulanase secretion are discussed.

The secY gene of V. cholerae: identification, cloning and characterization

The secY gene of Vibrio cholerae has been cloned and the complete nt sequence determined. It codes for a protein of 438 aa residues which functions as a translocator through which proteins cross the inner membrane. It can substitute for the Escherichia coli SecY protein and can suppress the phenotypic traits associated with E. coli secY mutants. The V. cholerae secY gene has about 71 and 83% similarity at the nt and aa levels respectively with the E. coli secY gene. Vibrio cholerae secY, similarly to the E. coli secY, is flanked by the genes encoding the ribosomal large subunit proteins L15 and L36. When expressed from the lac promoter, V. cholerae secY partially complements E. coli secY mutation even in absence of IPTG, while the E. coli secY gene complements only when IPTG is present. Presence of multiple SD sequences and a putative downstream (DS) box imply that the V. cholerae secY gene might have high translational efficiency. A V. cholerae mutant unable to translocate CTB through the inner membrane has been isolated. The secretion deficient phenotype of the mutant can be reversed by introducing the cloned V. cholerae secY gene.

The conserved tetracysteine motif in the general secretory pathway component PulE is required for efficient pullulanase secretion

The PulE component of the pullulanase secretion pathway, a typical main terminal branch of the general secretory pathway, has a tetracysteine motif (4Cys) that is also present in almost all of the many PulE homologues, including those involved in type-IV piliation and conjugal DNA transfer. The 4Cys resembles a zinc-binding motif found in other proteins such as adenylate kinases, which may be pertinent in view of the fact that PulE has a consensus ATP-binding motif and since at least one PulE homologue has been reported to have kinase activity. In PulE, the Cys residues of this motif form scrambled intra- and intermolecular disulfide bonds when cells are disrupted. Replacement of one or more Cys of this motif by Ser reduces PulE function, but at least two adjacent Cys must be replaced to prevent intramolecular disulfide bond formation.

The invasion-associated type-III protein secretion system in Salmonella--a review

The genetic determinants that confer upon Salmonella the ability to enter non-phagocytic cells are largely encoded in a pathogenicity island located at centisome 63 of the bacterial chromosome. Molecular genetic analysis has revealed that this region encodes a specialized protein secretion system that mediates the export and/or translocation of putative signaling proteins into the host cell. This protein secretion system, which has been termed type III or contact-dependent, has also been identified in other plant and animal pathogens that have, in common, the ability to interact with eukaryotic host cells in an intimate manner.

Recent progress and future directions in studies of the main terminal branch of the general secretory pathway in Gram-negative bacteria--a review

The main terminal branch (MTB) of the general secretory pathway is used by a wide variety of Gram- bacteria to transport exoproteins from the periplasm to the outside milieu. Recent work has led to the identification of the function of two of its 14 (or more) components: an enzyme with type-IV prepilin peptidase activity and a chaperone-like protein required for the insertion of another of the MTB components into the outer membrane. Despite these important discoveries, little tangible progress has been made towards identifying MTB components that determine secretion specificity (presumably by binding to cognate exoproteins) or which form the putative channel through which exoproteins are transported across the outer membrane. However, the idea that the single integral outer membrane component of the MTB could line the wall of this channel, and the intriguing possibility that other components of the MTB form a rudimentary type-IV pilus-like structure that might span the periplasm both deserve more careful examination. Although Escherichia coli K-12 does not normally secrete exoproteins, its chromosome contains an apparently complete set of genes coding for MTB components. At least two of these genes code for functional proteins, but the operon in which twelve of the genes are located does not appear to be expressed. We are currently searching for conditions which allow these genes to be expressed with the eventual aim of identifying the protein(s) that E. coli K-12 can secrete.

Pullulanase: model protein substrate for the general secretory pathway of gram-negative bacteria

Pullulanase of Klebsiella oxytoca is one of a wide variety of extracellular proteins that are secreted by Gram-negative bacteria by the complex main terminal branch (MTB) of the general secretory pathway. The roles of some of the 14 components of the MTB are now becoming clear. In this review it is proposed that most of these proteins form a complex, the secretion, that spans the cell envelope to control the opening and closing of channel in the outer membrane. Progress toward the goal of testing this model is reviewed.

Cross-talk between bacterial pathogens and their host cells

A taxonomically diverse group of bacterial pathogens have evolved a variety of strategies to subvert host-cellular functions to their advantage. This often involves two-way biochemical interactions leading to responses in both the pathogen and host cell. Central to this interaction is the function of a specialized protein secretion system that directs the export and/or translocation into the host cells of a number of bacterial proteins that can induce or interfere with host-cell signal transduction pathways. The understanding of these bacterial/host-cell interactions will not only lead to novel therapeutic approaches but will also result in a better understanding of a variety of basic aspects of cell physiology and immunology.

Identification of two regions of Klebsiella oxytoca pullulanase that together are capable of promoting beta-lactamase secretion by the general secretory pathway

Pullulanase (PulA) is a 116 kDa amylolytic lipoprotein secreted by the Gram-negative bacterium Klebsiella oxytoca via the general secretory pathway. A deletion strategy was used in an attempt to determine the nature and the location of the secretion signal(s) in PulA presumed to be necessary for its specific secretion. The starting material was a gene fusion coding for an efficiently secreted PulA-beta-lactamase hybrid protein. Successive series of exonuclease III-generated deletions were used to remove internal segments of PulA from this hybrid. A simple plate test allowed the identification of truncated hybrids that retained beta-lactamase activity and that were secreted. Two non-adjacent regions, A and B (78 and 80 amino acids, respectively), were together necessary and sufficient to promote beta-lactamase translocation across the outer membrane. Secretion of PulA itself was markedly reduced when either of these regions was deleted, and was completely abolished when both regions were eliminated.

Borrelia burgdorferi supercoiled plasmids encode multicopy tandem open reading frames and a lipoprotein gene family

DNA sequencing and Southern blot analyses of a Borrelia burgdorferi DNA fragment encoding a signal sequence led to the discovery of a genetic locus, designated 2.9, which appears to be present in at least seven copies in virulent B. burgdorferi 297. DNA sequence analysis of these regions revealed that each 2.9 locus contained an operon of four genes (ABCD) and open reading frames designated rep+ (positive strand) and rep- (negative strand) which encoded multiple repeat motifs. Downstream of the rep+ gene(s) in six of the completely cloned and sequenced 2.9 loci also were lipoprotein (LP) genes possessing highly similar signal sequences but encoding variable mature polypeptides. The lipoproteins could he separated into two classes on the basis of hydrophilicity profiles, sequence similarities, and reactivity with specific antibodies. The 2.9 loci were localized to two (20- and 30-kb) supercoiled plasmids in B. burgdorferi 297. Northern (RNA) blot analysis established that the 2.9 ABCD operon was only minimally expressed, whereas the rep- gene(s) and at least three of the seven LP genes were expressed by B. burgdorferi in vitro. A single putative promoter element was identified by RNA primer extension analysis upstream of the ABCD operon, whereas a number of potential promoter regions existed upstream of the LP genes. The combined data indicate that the ABCD operon, rep+ and rep- genes, and LP genes are separately transcribed during in vitro growth. The 2.9 loci possess a repetitiveness, diversity, and complexity not previously described for B. burgdorferi; differential expression of these genes may facilitate the spirochete's ability to survive in diverse host environments.

Enteropathogenic Escherichia coli: identification of a gene cluster coding for bundle-forming pilus morphogenesis

Sequence flanking the bfpA locus on the enteroadherent factor plasmid of the enteropathogenic Escherichia coli (EPEC) strain B171-8 (O111:NM) was obtained to identify genes that might be required for bundle-forming pilus (BFP) biosynthesis. Deletion experiments led to the identification of a contiguous cluster of at least 12 open reading frames, including bfpA, that could direct the synthesis of a morphologically normal BFP filament. Within the bfp gene cluster, we identified open reading frames that share homology with other type IV pilus accessory genes and with genes required for transformation competence and protein secretion. Immediately upstream of the bfp gene cluster, we identified a potential replication origin including genes that are predicted to encode proteins homologous with replicase and resolvase. Restriction fragment length polymorphism analysis of DNA from six additional EPEC serotypes showed that the organization of the bfp gene cluster and its juxtaposition with a potential plasmid origin of replication are highly conserved features of the EPEC biotype.

Characterization of type II protein secretion (xcp) genes in the plant growth-stimulating Pseudomonas putida, strain WCS358

In Pseudomonas aeruginosa, the products of the xcp genes are required for the secretion of exoproteins across the outer membrane. Despite structural conservation of the Xcp components, secretion of exoproteins via the Xcp pathway is generally not found in heterologous organisms. To study the specificity of this protein secretion pathway, the xcp genes of another fluorescent pseudomonad, the plant growth-promoting Pseudomonas putida strain WCS358, were cloned and characterized. Nucleotide sequence analysis revealed the presence of at least five genes, i.e., xcpP, Q, R, S, and T, with homology to xcp genes of P. aeruginosa. Unlike the genetic organization in P. aeruginosa, where the xcp cluster consists of two divergently transcribed operons, the xcp genes in P. putida are all oriented in the same direction, and probably comprise a single operon. Upstream of xcpP in P. putida, an additional open reading frame, with no homolog in P. aeruginosa, was identified, which possibly encodes a lipoprotein. Mutational inactivation of xcp genes in P. putida did not affect secretion, indicating that no proteins are secreted via the Xcp system under the growth conditions tested, and that an alternative secretion system is operative. To obtain some insight into the secretory pathway involved, the amino acid sequence of the N-terminus of the major extracellular protein was determined. The protein could be identified as flagellin. Mutations in the xcpQ and R genes of P. aeruginosa could not be complemented by introduction of the corresponding xcp genes of P. putida. However, expression of a hybrid XcpR protein, composed of the N-terminal one-third of P. aeruginosa XcpR and the C-terminal two-thirds of P. putida XcpR, did restore protein secretion in a P. aeruginosa xcpR mutant.

XpsD, an outer membrane protein required for protein secretion by Xanthomonas campestris pv. campestris, forms a multimer

XpsD is an outer membrane lipoprotein, required for the secretion of extracellular enzymes by Xanthomonas campestris pv. campestris. Our previous studies indicated that when the xpsD gene was interrupted by transposon Tn5, extracellular enzymes were accumulated in the periplasm (Hu, N.-T., Hung, M.-N., Chiou, S.-J., Tang, F., Chiang, D.-C. Huang, H.-Y. and Wu, C.-Y. (1992) J. Bacteriol. 174, 2679-2687). In this study, we constructed a series of substitutions and deletion mutant xpsD genes to investigate the roles of NH2- and COOH-terminal halves of XpsD in protein secretory function. Among these secretion defective xpsD mutations, one group (encoded by pCD105, pYLA, pKdA6, and pKD2) caused secretion interference when co-expressed with wild type xpsD, but the other (encoded by pMH7, pKdPs, and pKDT) did not. Cross-linking studies and gel filtration chromatography analysis indicated that the wild type XpsD protein forms a multimer in its native state. Similar gel filtration analysis of xpsD mutants revealed positive correlations between multimer formation and secretion interfering properties exerted by the mutant XpsD proteins in the parental strain XC1701. Those mutant XpsD proteins (encoded by pCD105, pYL4, pKdA6, and pKD2) that caused secretion interference formed multimers that are similar to the wild type XpsD multimers and those (encoded by pMH7, pKdPs, and pKDT) that did not formed smaller ones. Furthermore, gel filtration and anion exchange chromatography analyses indicated that the wild type XpsD protein co-fractionated with XpsD (delta 29-428) or XpsD (delta 448-650) protein but not with XpsD (delta 74-303) or XpsD (delta 553-759) protein. We propose that the mutant XpsD (delta 29-428) protein caused secretion interference primarily by forming mixed nonfunctional multimers with the wild type XpsD protein in XC1701 (pCD105), whereas the mutant XpsD (delta 74-303) did so by competing for unknown factor(s) in XC1701(pYL4).

Bacteriocin release proteins: mode of action, structure, and biotechnological application

The mechanism by which Gram-negative bacteria like Escherichia coli secrete bacteriocins into the culture medium is unique and quite different from the mechanism by which other proteins are translocated across the two bacterial membranes, namely through the known branches of the general secretory pathway. The release of bacteriocins requires the expression and activity of a so-called bacteriocin release protein and the presence of the detergent-resistant phospholipase A in the outer membrane. The bacteriocin release proteins are highly expressed small lipoproteins which are synthesized with a signal peptide that remains stable and which accumulates in the cytoplasmic membrane after cleavage. The combined action of these stable, accumulated signal peptides, the lipid-modified mature bacteriocin release proteins (BRPs) and phospholipase A cause the release of bacteriocins. The structure and mode of action of these BRPs as well as their application in the release of heterologous proteins by E. coli is described in this review.

Information essential for cell-cycle-dependent secretion of the 591-residue Caulobacter hook protein is confined to a 21-amino-acid sequence near the N-terminus

Recent findings suggest that axial flagellar proteins and virulence proteins of Gram-negative bacteria are exported from the cytoplasm via conserved translocation systems. To identify residues essential for secretion of flagellar axial proteins we examined the 591-residue Caulobacter crescentus flagellar hook protein. Western blot assays of the culture media of strains producing mutant hook proteins show that only residues 38-58 are essential for its secretion to the cell surface. We discuss the observation that this unprocessed 21-residue sequence is not conserved in other axial proteins and does not correspond to the SGL-, ANNLAN- and heptad repeat motifs that are located just upstream of the essential secretion information in the hook protein and are conserved near the N-termini of other axial proteins. These motifs, for which an essential role in export or assembly has been proposed, are required for motility. However, we also demonstrate that hook protein can only be secreted when the flagellar basal body is present in the cell envelope. The cell-cycle regulation of hook protein secretion confirms the specificity of the assay used in these studies and suggests that the basal body itself may serve as a secretion channel for the hook protein.

The toxin-co-regulated pilus of Vibrio cholerae O1: a model for type 4 pilus biogenesis?

The toxin-co-regulated pilus (TCP), an important colonization factor of Vibrio cholerae, is similar to the type 4 pilus produced by a variety of pathogenic Gram-negative bacteria. The putative translocation and assembly machinery of TCP has broad similarities with known pilin and nonpilin export mechanisms.

Alginate lyase from Klebsiella pneumoniae, subsp. aerogenes: gene cloning, sequence analysis and high-level production in Escherichia coli

The alyA gene, encoding a secreted guluronate-specific alginate lyase (Aly) from Klebsiella pneumoniae subsp. aerogenes type 25, has been cloned. DNA sequence analysis reveals two possible translation start sites for the precursor form of Aly and a long open reading frame (ORF) predicted to encode a 287-amino-acid (aa) mature form of Aly, in agreement with N-terminal aa sequence analysis of the protein. Aly has a calculated molecular mass of 31.4 kDa, in good agreement with SDS-PAGE analysis, and a calculated pI of 9.39. Comparison of the deduced aa sequence with a mannuronate-specific lyase from a marine bacterium reveals 19.3% identity and 28.8% similarity with a 9-aa conserved region close to the C terminus, probably of functional or structural significance. There is no obvious sequence similarity with pectate lyases which also catalyse a beta-elimination reaction. Heterologous expression of K. pneumoniae alyA in Escherichia coli yields 10 mg of Aly per litre of culture supernatant, apparently due to non-specific release from the periplasm.

Maturation pathway of Escherichia coli heat-stable enterotoxin I: requirement of DsbA for disulfide bond formation

The Escherichia coli heat-stable enterotoxin STp is synthesized as a precursor consisting of pre, pro and mature regions. Mature STp is released into the culture supernatant and is composed of 18-amino-acid resides which contain three intramolecular disulfide bonds. The involvement of DsbA in the formation of the disulfide bonds of STp was examined in this study. A dsbA mutant was transformed with a plasmid harboring the STp gene, and the ST activity was significantly lower than that of the parent strain harboring the same plasmid. Furthermore, purified DsbA induced the conversion of synthetic STp peptide (inactive form) to the active form and increased the ST activity of the culture supernatant derived from the dsbA transformants. These results showed that DsbA directly catalyzes the formation of the disulfide bonds of STp. DsbA is located in periplasmic space, where STp is released as an intermediate form consisting of pro and mature regions. To examine the effect of the pro region on the action of DsbA, we replaced the cysteine residue at position 39 and tested the effect in vivo. The substitution caused a significant decrease of ST activity in the culture supernatant, the accumulation of inactive ST in periplasmic space, and an alteration in the cleavage site of the intermediate of STp. We conclude that Cys-39 is important for recognition by the processing enzymes required for the maturation of STp.

Molecular characterization of PulE, a protein required for pullulanase secretion

pulE, one of 14 genes specifically required for pullulanase secretion in Klebsiella oxytoca, codes for a putative nucleotide-binding protein. Subcellular fractionation indicated that the majority of PulE in Escherichia coli cells expressing all 14 secretion genes is mainly associated with the cytoplasmic membrane through both hydrophobic and non-hydrophobic interactions. Mutational analysis revealed that one of the two regions of PulE that are conserved in many nucleotide-binding proteins (Walker box A) is essential for pullulanase secretion. Likewise, mutations that removed aspartate residues from each of two regions immediately downstream from the Walker box A also reduced secretion. These aspartate-rich regions are highly conserved in all 16 known PulE homologues but not in any other nucleotide-binding proteins. Altogether, these results indicate that PulE might belong to a new family of nucleotide-binding proteins. The protein could not be cross-linked to the photoactivatable ATP analogue azido-ATP, however. Most pulE point or deletion mutations which prevented pullulanase secretion exhibited transdominance when expressed at high levels in cells producing wild-type PulE protein. Evidence presented suggests that PulE might be a homodimer.

Regional sequence homologies in starch-degrading enzymes

The enzymatic hydrolysis of starch, consisting of linear (amylose) and branched (amylopectin) glucose polymers, is catalyzed by alpha-, beta- and glucoamylases (gamma-amylases), cyclodextrinases, alpha-glucosidases, and debranching enzymes. Saccharomyces cerevisiae cannot utilize starch. Our laboratory has previously co-expressed the Bacillus amyloliquefaciens alpha-amylase (AMY) and the Saccharomyces diastaticus glucoamylase (STA2) genes in S. cerevisiae. A gene encoding a debranching enzyme (pullulanase) from Klebsiella pneumoniae ATCC15050 was cloned and its nucleotide sequence determined. This gene will be co-expressed with the alpha- and gamma-amylase to produce an amylolytic S. cerevisiae strain. Extensive data base comparisons of the K. pneumoniae pullulanase amino-acid sequence with the amino-acid sequences of other debranching enzymes and alpha-, beta- and gamma-amylases (from bacteria, yeasts, higher fungi and higher eukaryotes), indicated that these debranching enzymes have amino-acid regions similar to those found in alpha-amylases. The conserved regions in alpha-amylases comprise key residues that are implicated in substrate binding, catalysis, and calcium binding and are as follows. Region 1: DVVINH; region 2: GFRLDAAKH and region 4: FVDNHD. When comparing conserved regions, no similarity could be detected between debranching enzymes and beta- and gamma-amylases.