Pilotin-secretin recognition in the type II secretion system of Klebsiella oxytoca

To defend or to attack? Antagonistic interactions between Serratia plymuthica and fungal plant pathogens, a species-specific volatile dialogue

Volatile organic compounds (VOCs) are involved in microbial interspecies communication and in the mode of action of various antagonistic interactions. They are important for balancing host-microbe interactions and provide the basis for developing biological control strategies to control plant pathogens. We studied the interactions between the bacterial antagonist Serratia plymuthica HRO-C48 and three fungal plant pathogens Rhizoctonia solani, Leptosphaeria maculans and Verticillium longisporum. Significant differences in fungal growth inhibition by the Serratia-emitted VOCs in pairwise dual culture assays and changes in the transcriptome of the bacterium and in the volatilomes of both interacting partners were observed. Even though the rate of fungal growth inhibition by Serratia was variable, the confrontation of the bacterium with the VOCs of all three fungi changed the levels of expression of the genes involved in stress response, biofilm formation, and the production of antimicrobial VOCs. Pairwise interacting microorganisms switched between defense (downregulation of gene expression) and attack (upregulation of gene expression and metabolism followed by growth inhibition of the interacting partner) modes, subject to the combinations of microorganisms that were interacting. In the attack mode HRO-C48 significantly inhibited the growth of R. solani while simultaneously boosting its own metabolism; by contrast, its metabolism was downregulated when HRO-C48 went into a defense mode that was induced by the L. maculans and V. longisporum VOCs. L. maculans growth was slightly reduced by the one bacterial VOC methyl acetate that induced a strong downregulation of expression of genes involved in almost all metabolic functions in S. plymuthica. Similarly, the interaction between S. plymuthica and V. longisporum resulted in an insignificant growth reduction of the fungus and repressed the rate of bacterial metabolism on the transcriptional level, accompanied by an intense volatile dialogue. Overall, our results indicate that VOCs substantially contribute to the highly break species-specific interactions between pathogens and their natural antagonists and thus deserving of increased consideration for pathogen control.

Scaffolding Protein GspB/OutB Facilitates Assembly of the Dickeya dadantii Type 2 Secretion System by Anchoring the Outer Membrane Secretin Pore to the Inner Membrane and to the Peptidoglycan Cell Wall

The phytopathogenic proteobacterium Dickeya dadantii secretes an array of plant cell wall-degrading enzymes and other virulence factors via the type 2 secretion system (T2SS). T2SSs are widespread among important plant, animal, and human bacterial pathogens. This multiprotein complex spans the double membrane cell envelope and secretes fully folded proteins through a large outer membrane pore formed by 15 subunits of the secretin GspD. Secretins are also found in the type 3 secretion system and the type 4 pili. Usually, specialized lipoproteins termed pilotins assist the targeting and assembly of secretins into the outer membrane. Here, we show that in D. dadantii, the pilotin acts in concert with the scaffolding protein GspB. Deletion of gspB profoundly impacts secretin assembly, pectinase secretion, and virulence. Structural studies reveal that GspB possesses a conserved periplasmic homology region domain that interacts directly with the N-terminal secretin domain. Site-specific photo-cross-linking unravels molecular details of the GspB-GspD complex in vivo. We show that GspB facilitates outer membrane targeting and assembly of the secretin pores and anchors them to the inner membrane while the C-terminal extension of GspB provides a scaffold for the secretin channel in the peptidoglycan cell wall. Phylogenetic analysis shows that in other bacteria, GspB homologs vary in length and domain composition and act in concert with either a cognate ATPase GspA or the pilotin GspS.

Structural bioinformatic analysis of DsbA proteins and their pathogenicity associated substrates

The disulfide bond (DSB) forming system and in particular DsbA, is a key bacterial oxidative folding catalyst. Due to its role in promoting the correct assembly of a wide range of virulence factors required at different stages of the infection process, DsbA is a master virulence rheostat, making it an attractive target for the development of new virulence blockers. Although DSB systems have been extensively studied across different bacterial species, to date, little is known about how DsbA oxidoreductases are able to recognize and interact with such a wide range of substrates. This review summarizes the current knowledge on the DsbA enzymes, with special attention on their interaction with the partner oxidase DsbB and substrates associated with bacterial virulence. The structurally and functionally diverse set of bacterial proteins that rely on DsbA-mediated disulfide bond formation are summarized. Local sequence and secondary structure elements of these substrates are analyzed to identify common elements recognized by DsbA enzymes. This not only provides information on protein folding systems in bacteria but also offers tools for identifying new DsbA substrates and informs current efforts aimed at developing DsbA targeted anti-microbials.

The structure and mechanism of the bacterial type II secretion system

The type II secretion system (T2SS) is a multi-protein complex used by many bacteria to move substrates across their cell membrane. Substrates released into the environment serve as local and long-range effectors that promote nutrient acquisition, biofilm formation, and pathogenicity. In both animals and plants, the T2SS is increasingly recognized as a key driver of virulence. The T2SS spans the bacterial cell envelope and extrudes substrates through an outer membrane secretin channel using a pseudopilus. An inner membrane assembly platform and a cytoplasmic motor controls pseudopilus assembly. This microreview focuses on the structure and mechanism of the T2SS. Advances in cryo-electron microscopy are enabling increasingly elaborate sub-complexes to be resolved. However, key questions remain regarding the mechanism of pseudopilus extension and retraction, and how this is coupled with the choreography of the substrate moving through the secretion system. The T2SS is part of an ancient type IV filament superfamily that may have been present within the last universal common ancestor (LUCA). Overall, mechanistic principles that underlie T2SS function have implication for other closely related systems such as the type IV and tight adherence pilus systems.

Characterization of the Pilotin-Secretin Complex from the Salmonella enterica Type III Secretion System Using Hybrid Structural Methods

The type III secretion system (T3SS) is a multi-membrane-spanning protein channel used by Gram-negative pathogenic bacteria to secrete effectors directly into the host cell cytoplasm. In the many species reliant on the T3SS for pathogenicity, proper assembly of the outer membrane secretin pore depends on a diverse family of lipoproteins called pilotins. We present structural and biochemical data on the Salmonella enterica pilotin InvH and the S domain of its cognate secretin InvG. Characterization of InvH by X-ray crystallography revealed a dimerized, α-helical pilotin. Size-exclusion-coupled multi-angle light scattering and small-angle X-ray scattering provide supporting evidence for the formation of an InvH homodimer in solution. Structures of the InvH-InvG heterodimeric complex determined by X-ray crystallography and NMR spectroscopy indicate a predominantly hydrophobic interface. Knowledge of the interaction between InvH and InvG brings us closer to understanding the mechanisms by which pilotins assemble the secretin pore.

Bacterial secretins: Mechanisms of assembly and membrane targeting

Secretion systems are employed by bacteria to transport macromolecules across membranes without compromising their integrities. Processes including virulence, colonization, and motility are highly dependent on the secretion of effector molecules toward the immediate cellular environment, and in some cases, into the host cytoplasm. In Type II and Type III secretion systems, as well as in Type IV pili, homomultimeric complexes known as secretins form large pores in the outer bacterial membrane, and the localization and assembly of such 1 MDa molecules often relies on pilotins or accessory proteins. Significant progress has been made toward understanding details of interactions between secretins and their partner proteins using approaches ranging from bacterial genetics to cryo electron microscopy. This review provides an overview of the mode of action of pilotins and accessory proteins for T2SS, T3SS, and T4PS secretins, highlighting recent near-atomic resolution cryo-EM secretin complex structures and underlining the importance of these interactions for secretin functionality.

Soluble versions of outer membrane cytochromes function as exporters for heterologously produced cargo proteins

This study reveals that it is possible to secrete truncated versions of outer membrane cytochromes into the culture supernatant and that these proteins can provide a basis for the export of heterologously produced proteins. Different soluble and truncated versions of the outer membrane cytochrome MtrF were analyzed for their suitability to be secreted. A protein version with a very short truncation of the N-terminus to remove the recognition sequence for the addition of a lipid anchor is secreted efficiently to the culture supernatant, and moreover this protein could be further truncated by a deletion of 160 amino acid and still is detectable in the supernatant. By coupling a cellulase to this soluble outer membrane cytochrome, the export efficiency was measured by means of relative cellulase activity. We conclude that outer membrane cytochromes of S. oneidensis can be applied as transporters for the export of target proteins into the medium using the type II secretion pathway.

Assembly and targeting of secretins in the bacterial outer membrane

In Gram-negative bacteria, secretion of toxins ensure the survival of the bacterium. Such toxins are secreted by sophisticated multiprotein systems. The most conserved part in some of these secretion systems are components, called secretins, which form the outer membrane ring in these systems. Recent structural studies shed some light on the oligomeric organization of secretins. However, the mechanisms by which these proteins are targeted to the outer membrane and assemble there into ring structures are still not fully understood. This review discusses the various species-specific targeting and assembly pathways that are taken by secretins in order to form their functional oligomers.

Structure and assembly of pilotin-dependent and -independent secretins of the type II secretion system

The type II secretion system (T2SS) is a cell envelope-spanning macromolecular complex that is prevalent in Gram-negative bacterial species. It serves as the predominant virulence mechanism of many bacteria including those of the emerging human pathogens Vibrio vulnificus and Aeromonas hydrophila. The system is composed of a core set of highly conserved proteins that assemble an inner membrane platform, a periplasmic pseudopilus and an outer membrane complex termed the secretin. Localization and assembly of secretins in the outer membrane requires recognition of secretin monomers by two different partner systems: an inner membrane accessory complex or a highly sequence-diverse outer membrane lipoprotein, termed the pilotin. In this study, we addressed the question of differential secretin assembly mechanisms by using cryo-electron microscopy to determine the structures of the secretins from A. hydrophila (pilotin-independent ExeD) and V. vulnificus (pilotin-dependent EpsD). These structures, at approximately 3.5 Å resolution, reveal pentadecameric stoichiometries and C-terminal regions that carry a signature motif in the case of a pilotin-dependent assembly mechanism. We solved the crystal structure of the V. vulnificus EpsS pilotin and confirmed the importance of the signature motif for pilotin-dependent secretin assembly by performing modelling with the C-terminus of EpsD. We also show that secretin assembly is essential for membrane integrity and toxin secretion in V. vulnificus and establish that EpsD requires the coordinated activity of both the accessory complex EpsAB and the pilotin EpsS for full assembly and T2SS function. In contrast, mutation of the region of the S-domain that is normally the site of pilotin interactions has little effect on assembly or function of the ExeD secretin. Since secretins are essential outer membrane channels present in a variety of secretion systems, these results provide a structural and functional basis for understanding the key assembly steps for different members of this vast pore-forming family of proteins.

Industrially produced pullulanases with thermostability: Discovery, engineering, and heterologous expression

Pullulanases (EC 3.2.1.41) are well-known starch-debranching enzymes widely used to hydrolyze α-1,6-glucosidic linkages in starch, pullulan, amylopectin, and other oligosaccharides, with application potentials in food, brewing, and pharmaceutical industries. Although extensive studies are done to discover and express pullulanases, only few are available with desirable characteristics for industrial applications. This raises the challenge to mine new enzyme sources, engineer proteins based on sequence/structure, and regulate expressions. We review here the identification of extremophilic and mesophilic microbes as sources of industrial pullulanases with desirable characteristics, including acid-resistance, thermostability, and psychrotrophism. We present current advances in site-directed mutagenesis and sequence/structure-guided protein engineering of pullulanases. In addition, we discuss heterologous expression of pullulanases in prokaryotic and eukaryotic microbial systems, and address the effectiveness of the expression elements and their regulation of enzyme production. Finally, we indicate future research needs to develop desired industrial pullulanases.

Structure and Membrane Topography of the Vibrio-Type Secretin Complex from the Type 2 Secretion System of Enteropathogenic Escherichia coli

The β-barrel assembly machinery (BAM) complex is the core machinery for the assembly of β-barrel membrane proteins, and inhibition of BAM complex activity is lethal to bacteria. Discovery of integral membrane proteins that are key to pathogenesis and yet do not require assistance from the BAM complex raises the question of how these proteins assemble into bacterial outer membranes. Here, we address this question through a structural analysis of the type 2 secretion system (T2SS) secretin from enteropathogenic Escherichia coli O127:H6 strain E2348/69. Long β-strands assemble into a barrel extending 17 Å through and beyond the outer membrane, adding insight to how these extensive β-strands are assembled into the E. coli outer membrane. The substrate docking chamber of this secretin is shown to be sufficient to accommodate the substrate mucinase SteC.IMPORTANCE In order to cause disease, bacterial pathogens inhibit immune responses and induce pathology that will favor their replication and dissemination. In Gram-negative bacteria, these key attributes of pathogenesis depend on structures assembled into or onto the outer membrane. One of these is the T2SS. The Vibrio-type T2SS mediates cholera toxin secretion in Vibrio cholerae, and in Escherichia coli O127:H6 strain E2348/69, the same machinery mediates secretion of the mucinases that enable the pathogen to penetrate intestinal mucus and thereby establish deadly infections.

Structural Basis of Type 2 Secretion System Engagement between the Inner and Outer Bacterial Membranes

Sophisticated nanomachines are used by bacteria for protein secretion. In Gram-negative bacteria, the type 2 secretion system (T2SS) is composed of a pseudopilus assembly platform in the inner membrane and a secretin complex in the outer membrane. The engagement of these two megadalton-sized complexes is required in order to secrete toxins, effectors, and hydrolytic enzymes. Pseudomonas aeruginosa has at least two T2SSs, with the ancestral nanomachine having a secretin complex composed of XcpQ. Until now, no high-resolution structural information was available to distinguish the features of this Pseudomonas-type secretin, which varies greatly in sequence from the well-characterized Klebsiella-type and Vibrio-type secretins. We have purified the ~1-MDa secretin complex and analyzed it by cryo-electron microscopy. Structural comparisons with the Klebsiella-type secretin complex revealed a striking structural homology despite the differences in their sequence characteristics. At 3.6-Å resolution, the secretin complex was found to have 15-fold symmetry throughout the membrane-embedded region and through most of the domains in the periplasm. However, the N1 domain and N0 domain were not well ordered into this 15-fold symmetry. We suggest a model wherein this disordering of the subunit symmetry for the periplasmic N domains provides a means to engage with the 6-fold symmetry in the inner membrane platform, with a metastable engagement that can be disrupted by substrate proteins binding to the region between XcpP, in the assembly platform, and the XcpQ secretin.

How the outer membrane and inner membrane components of the T2SS engage each other and yet can allow for substrate uptake into the secretin chamber has challenged the protein transport field for some time. This vexing question is of significance because the T2SS collects folded protein substrates in the periplasm for transport out of the bacterium and yet must discriminate these few substrate proteins from all the other hundred or so folded proteins in the periplasm. The structural analysis here supports a model wherein substrates must compete against a metastable interaction between XcpP in the assembly platform and the XcpQ secretin, wherein only structurally encoded features in the T2SS substrates compete well enough to disrupt XcpQ-XcpP for entry into the XcpQ chamber, for secretion across the outer membrane.

The secretome of Acinetobacter baumannii ATCC 17978 type II secretion system reveals a novel plasmid encoded phospholipase that could be implicated in lung colonization

Acinetobacter baumannii infections are compounded with a striking lack of treatment options. In many Gram-negative bacteria, secreted proteins play an important early role in avoiding host defences. Typically, these proteins are targeted to the external environment or into host cells using dedicated transport systems. Despite the fact that medically relevant species of Acinetobacter possess a type II secretion system (T2SS), only recently, its significance as an important pathway for delivering virulence factors has gained attention. Using in silico analysis to characterize the genetic determinants of the T2SS, which are found clustered in other organisms, in Acinetobacter species, they appear to have a unique genetic organization and are distributed throughout the genome. When compared to other T2SS orthologs, individual components of the T2SS apparatus showed the highest similarity to those of Pseudomonas aeruginosa. A mutant of Acinetobacter baumannii strain ATCC 17978 lacking the secretin component of the T2SS (ΔgspD), together with a trans-complemented mutant, were tested in a series of in vitro and in vivo assays to determine the role of T2SS in pathogenicity. The ΔgspD mutant displayed decreased lipolytic activity, associated with attenuated colonization ability in a murine pneumonia model. These phenotypes are linked to LipAN, a novel plasmid-encoded phospholipase, identified through mass spectroscopy as a T2SS substrate. Recombinant LipAN showed specific phospholipase activity in vitro. Proteomics on the T2-dependent secretome of ATCC 17978 strain revealed its potential dedication to the secretion of a number of lipolytic enzymes, among others which could contribute to its virulence. This study highlights the role of T2SS as an active contributor to the virulence of A. baumannii potentially through secretion of a newly identified phospholipase.

Lipids assist the membrane insertion of a BAM-independent outer membrane protein

Like several other large, multimeric bacterial outer membrane proteins (OMPs), the assembly of the Klebsiella oxytoca OMP PulD does not rely on the universally conserved β-barrel assembly machinery (BAM) that catalyses outer membrane insertion. The only other factor known to interact with PulD prior to or during outer membrane targeting and assembly is the cognate chaperone PulS. Here, in vitro translation-transcription coupled PulD folding demonstrated that PulS does not act during the membrane insertion of PulD, and engineered in vivo site-specific cross-linking between PulD and PulS showed that PulS binding does not prevent membrane insertion. In vitro folding kinetics revealed that PulD is atypical compared to BAM-dependent OMPs by inserting more rapidly into membranes containing E. coli phospholipids than into membranes containing lecithin. PulD folding was fast in diC_14:0-phosphatidylethanolamine liposomes but not diC_14:0-phosphatidylglycerol liposomes, and in diC_18:1-phosphatidylcholine liposomes but not in diC_14:1-phosphatidylcholine liposomes. These results suggest that PulD efficiently exploits the membrane composition to complete final steps in insertion and explain how PulD can assemble independently of any protein-assembly machinery. Lipid-assisted assembly in this manner might apply to other large OMPs whose assembly is BAM-independent.

ExsB is required for correct assembly of the Pseudomonas aeruginosa type III secretion apparatus in the bacterial membrane and full virulence in vivo

Pseudomonas aeruginosa is responsible for high-morbidity infections of cystic fibrosis patients and is a major agent of nosocomial infections. One of its most potent virulence factors is a type III secretion system (T3SS) that injects toxins directly into the host cell cytoplasm. ExsB, a lipoprotein localized in the bacterial outer membrane, is one of the components of this machinery, of which the function remained elusive until now. The localization of the exsB gene within the exsCEBA regulatory gene operon suggested an implication in the T3SS regulation, while its similarity with yscW from Yersinia spp. argued in favor of a role in machinery assembly. The present work shows that ExsB is necessary for full in vivo virulence of P. aeruginosa. Furthermore, the requirement of ExsB for optimal T3SS assembly and activity is demonstrated using eukaryotic cell infection and in vitro assays. In particular, ExsB promotes the assembly of the T3SS secretin in the bacterial outer membrane, highlighting the molecular role of ExsB as a pilotin. This involvement in the regulation of the T3S apparatus assembly may explain the localization of the ExsB-encoding gene within the regulatory gene operon.

Exceptionally widespread nanomachines composed of type IV pilins: the prokaryotic Swiss Army knives

Prokaryotes have engineered sophisticated surface nanomachines that have allowed them to colonize Earth and thrive even in extreme environments. Filamentous machineries composed of type IV pilins, which are associated with an amazing array of properties ranging from motility to electric conductance, are arguably the most widespread since distinctive proteins dedicated to their biogenesis are found in most known species of prokaryotes. Several decades of investigations, starting with type IV pili and then a variety of related systems both in bacteria and archaea, have outlined common molecular and structural bases for these nanomachines. Using type IV pili as a paradigm, we will highlight in this review common aspects and key biological differences of this group of filamentous structures.

Using type IV pili as a paradigm, we review common genetic, structural and mechanistic features (many) as well as differences (few) of the exceptionally widespread and functionally versatile prokaryotic nano-machines composed of type IV pilins.

Structure of the type VI secretion phospholipase effector Tle1 provides insight into its hydrolysis and membrane targeting

A diverse superfamily of phospholipases consisting of the type VI lipase effectors Tle1–Tle5 secreted by the bacterial type VI secretion system (T6SS) have recently been identified as antibacterial effectors that hydrolyze membrane phospholipids. These effectors show no significant homology to known lipases, and their mechanism of membrane targeting and hydrolysis of phospholipids remains unknown. Here, the crystal structure of Tle1 (∼96.5 kDa) fromPseudomonas aeruginosarefined to 2.0 Å resolution is reported, representing the first structure of this superfamily. Its overall structure can be divided into two distinct parts, the phospholipase catalytic module and the putative membrane-anchoring module; this arrangement has not previously been observed in known lipase structures. The phospholipase catalytic module has a canonical α/β-hydrolase fold and mutation of any residue in the Ser-Asp-His catalytic triad abolishes its toxicity. The putative membrane-anchoring module adopts an open conformation composed of three amphipathic domains, and its partial folds are similar to those of several periplasmic or membrane proteins. A cell-toxicity assay revealed that the putative membrane-anchoring module is critical to Tle1 antibacterial activity. A molecular-dynamics (MD) simulation system in which the putative membrane-anchoring module embedded into a bilayer was stable over 50 ns. These structure–function studies provide insight into the hydrolysis and membrane-targeting process of the unique phospholipase Tle1.

Peptidoglycan-binding protein TsaP functions in surface assembly of type IV pili

Type IV pili (T4P) are ubiquitous and versatile bacterial cell surface structures involved in adhesion to host cells, biofilm formation, motility, and DNA uptake. In Gram-negative bacteria, T4P pass the outer membrane (OM) through the large, oligomeric, ring-shaped secretin complex. In the β-proteobacterium Neisseria gonorrhoeae, the native PilQ secretin ring embedded in OM sheets is surrounded by an additional peripheral structure, consisting of a peripheral ring and seven extending spikes. To unravel proteins important for formation of this additional structure, we identified proteins that are present with PilQ in the OM. One such protein, which we name T4P secretin-associated protein (TsaP), was identified as a phylogenetically widely conserved component of the secretin complex that co-occurs with genes for T4P in Gram-negative bacteria. TsaP contains an N-terminal carbohydrate-binding lysin motif (LysM) domain and a C-terminal domain of unknown function. In N. gonorrhoeae, lack of TsaP results in the formation of membrane protrusions containing multiple T4P, concomitant with reduced formation of surface-exposed T4P. Lack of TsaP did not affect the oligomeric state of PilQ, but resulted in loss of the peripheral structure around the PilQ secretin. TsaP binds peptidoglycan and associates strongly with the OM in a PilQ-dependent manner. In the δ-proteobacterium Myxococcus xanthus, TsaP is also important for surface assembly of T4P, and it accumulates and localizes in a PilQ-dependent manner to the cell poles. Our results show that TsaP is a novel protein associated with T4P function and suggest that TsaP functions to anchor the secretin complex to the peptidoglycan.

Dynamic interplay between the periplasmic and transmembrane domains of GspL and GspM in the type II secretion system

The type II secretion system (T2SS) is a multiprotein nanomachine that transports folded proteins across the outer membrane of gram-negative bacteria. The molecular mechanisms that govern the secretion process remain poorly understood. The inner membrane components GspC, GspL and GspM possess a single transmembrane segment (TMS) and a large periplasmic region and they are thought to form a platform of unknown function. Here, using two-hybrid and pull-down assays we performed a systematic mapping of the GspC/GspL/GspM interaction regions in the plant pathogen Dickeya dadantii. We found that the TMS of these components interact with each other, implying a complex interaction network within the inner membrane. We also showed that the periplasmic, ferredoxin-like, domains of GspL and GspM drive homo- and heterodimerizations of these proteins. Disulfide bonding analyses revealed that the respective domain interfaces include the equivalent secondary-structure elements, suggesting alternating interactions of the periplasmic domains, L/L and M/M versus L/M. Finally, we found that displacements of the periplasmic GspM domain mediate coordinated shifts or rotations of the cognate TMS. These data suggest a plausible mechanism for signal transmission between the periplasmic and the cytoplasmic portions of the T2SS machine.

Bacterial secretins form constitutively open pores akin to general porins

Proteins called secretins form large multimeric complexes that are essential for macromolecular transit across the outer membrane of Gram-negative bacteria. Evidence suggests that the channels formed by some secretin complexes are not tightly closed, but their permeability properties have not been well characterized. Here, we used cell-free synthesis coupled with spontaneous insertion into liposomes to investigate the permeability of the secretin PulD. Leakage assays using preloaded liposomes indicated that PulD allows the efflux of small fluorescent molecules with a permeation cutoff similar to that of general porins. Other secretins were also found to form similar pores. To define the polypeptide region involved in determining the pore size, we analyzed a collection of PulD variants and studied the roles of gates 1 and 2, which were previously reported to affect the pore size of filamentous phage f1 secretin pIV, in assembly and pore formation. Liposome leakage and a novel in vivo assay showed that replacement of the conserved proline residue at position 443 in PulD by leucine increased the apparent size of the pore. The in vitro approach described here could be used to study the pore properties of membrane proteins whose production in vivo is toxic.

The targeting, docking and anti-proteolysis functions of the secretin chaperone PulS

The Klebsiella oxytoca lipoprotein PulS might function as either or both a pilot and a docking factor in the outer membrane targeting and assembly of the Type II secretion system secretin PulD. In the piloting model, PulS binds to PulD monomers and targets them to the outer membrane via the lipoprotein sorting pathway components LolA and LolB. In this model, PulS also protects the PulD monomers from proteolysis during transit through the periplasm. In the docking model, PulS is targeted alone to the outer membrane, where it acts as a receptor for PulD monomers, allowing them to accumulate and assemble specifically in this membrane. PulS was shown to dissociate from and/or re-associate freely with PulD multimers in zwitterionic detergent, making it difficult to determine whether PulS remains associated with PulD dodecamers in the outer membrane by co-purification. However, PulD protomers in the dodecamer were shown to be stable in the absence of PulS, indicating that PulS is only required to protect the protease-susceptible monomer. DegP was identified as one of the proteases that could contribute to PulD degradation in the absence of PulS. Studies on the in vitro assembly and targeting of PulD into Escherichia coli membrane vesicles demonstrated its strong preference to insert into the inner membrane, as is the case in vivo in the absence of PulS. However, PulD could be targeted to outer membrane fragments in vitro if they were preloaded with PulS, indicating the technical feasibility of the docking model. We conclude that both modes of action might contribute to efficient outer membrane targeting of PulD in vivo, although the piloting function is likely to predominate.

Assembly of the type II secretion system

The type II secretion system is utilized by many Gram-negative bacteria to export folded proteins to the surface and/or the extracellular environment of the cell. Although the function of the system is to move proteins from the periplasm to the outside of the cell, it is a large trans-envelope structure composed of more than a dozen different proteins present in multiple copies, including peripheral, integral inner membrane and integral outer membrane proteins plus a pseudopilus stretching between them. The establishment of this structure as an integral component of the entire envelope including the peptidoglycan layer between the two membranes requires assembly. Many of the participants and processes involved in this assembly have now been established, while other aspects remain to be discovered or more fully understood.

Crystal structure of the pilotin from the enterohemorrhagic Escherichia coli type II secretion system

Bacteria contain several sophisticated macromolecular machineries responsible for translocating proteins across the cell envelope. One prominent example is the type II secretion system (T2SS), which contains a large outer membrane channel, called the secretin. These gated channels require specialized proteins, so-called pilotins, to reach and assemble in the outer membrane. Here we report the crystal structure of the pilotin GspS from the T2SS of enterohemorrhagic Escherichia coli (EHEC), an important pathogen that can cause severe disease in cases of food poisoning. In this four-helix protein, the straight helix α2, the curved helix α3 and the bent helix α4 surround the central N-terminal helix α1. The helices of GspS create a prominent groove, mainly formed by side chains of helices α1, α2 and α3. In the EHEC GspS structure this groove is occupied by extra electron density which is reminiscent of an α-helix and corresponds well with a binding site observed in a homologous pilotin. The residues forming the groove are well conserved among homologs, pointing to a key role of this groove in this class of T2SS pilotins. At the same time, T2SS pilotins in different species can be entirely different in structure, and the pilotins for secretins in non-T2SS machineries have yet again unrelated folds, despite a common function. It is striking that a common complex function, such as targeting and assembling an outer membrane multimeric channel, can be performed by proteins with entirely different folds.

Assembly of the type II secretion system such as found in Vibrio cholerae depends on the novel Pilotin AspS

The Type II Secretion System (T2SS) is a molecular machine that drives the secretion of fully-folded protein substrates across the bacterial outer membrane. A key element in the machinery is the secretin: an integral, multimeric outer membrane protein that forms the secretion pore. We show that three distinct forms of T2SSs can be distinguished based on the sequence characteristics of their secretin pores. Detailed comparative analysis of two of these, the Klebsiella-type and Vibrio-type, showed them to be further distinguished by the pilotin that mediates their transport and assembly into the outer membrane. We have determined the crystal structure of the novel pilotin AspS from Vibrio cholerae, demonstrating convergent evolution wherein AspS is functionally equivalent and yet structurally unrelated to the pilotins found in Klebsiella and other bacteria. AspS binds to a specific targeting sequence in the Vibrio-type secretins, enhances the kinetics of secretin assembly, and homologs of AspS are found in all species of Vibrio as well those few strains of Escherichia and Shigella that have acquired a Vibrio-type T2SS.

The type 2 secretion system (T2SS) is a sophisticated, multi-component molecular machine that drives the secretion of fully-folded protein substrates across the bacterial outer membrane. In Vibrio cholerae, for example, the T2SS mediates the secretion of cholera toxin. We find that there are three distinct forms of T2SS, based on the sequence characteristics of the secretin. A targeting paradigm, developed for the Klebsiella-type secretin PulD, could not previously be applied to the T2SS in Vibrio cholerae and many other bacterial species whose genomes encode no homolog of the crucial targeting factor PulS (also called OutS, EtpO or GspS). Using bioinformatics we find, remarkably, that these bacteria have instead evolved a structurally distinct protein to serve in place of PulS. We crystallized and solved the structure of this distinct factor, AspS, measured its activity in novel assays for T2SS assembly, and show that the protein is essential for the function of the Vibrio-type T2SS. A structural homolog of AspS found here in Pseudomonas suggests widespread use of the pilotin-secretin targeting paradigm for T2SS assembly.

Structure and assembly of a trans-periplasmic channel for type IV pili in Neisseria meningitidis

Type IV pili are polymeric fibers which protrude from the cell surface and play a critical role in adhesion and invasion by pathogenic bacteria. The secretion of pili across the periplasm and outer membrane is mediated by a specialized secretin protein, PilQ, but the way in which this large channel is formed is unknown. Using NMR, we derived the structures of the periplasmic domains from N. meningitidis PilQ: the N-terminus is shown to consist of two β-domains, which are unique to the type IV pilus-dependent secretins. The structure of the second β-domain revealed an eight-stranded β-sandwich structure which is a novel variant of the HSP20-like fold. The central part of PilQ consists of two α/β fold domains: the structure of the first of these is similar to domains from other secretins, but with an additional α-helix which links it to the second α/β domain. We also determined the structure of the entire PilQ dodecamer by cryoelectron microscopy: it forms a cage-like structure, enclosing a cavity which is approximately 55 Å in internal diameter at its largest extent. Specific regions were identified in the density map which corresponded to the individual PilQ domains: this allowed us to dock them into the cryoelectron microscopy density map, and hence reconstruct the entire PilQ assembly which spans the periplasm. We also show that the C-terminal domain from the lipoprotein PilP, which is essential for pilus assembly, binds specifically to the first α/β domain in PilQ and use NMR chemical shift mapping to generate a model for the PilP:PilQ complex. We conclude that passage of the pilus fiber requires disassembly of both the membrane-spanning and the β-domain regions in PilQ, and that PilP plays an important role in stabilising the PilQ assembly during secretion, through its anchorage in the inner membrane.

A Single Amino Acid Substitution Changes the Self-Assembly Status of a Type IV Piliation Secretin

Secretins form large multimeric complexes in the outer membranes of many Gram-negative bacteria, where they function as dedicated gateways that allow proteins to access the extracellular environment. Despite their overall relatedness, different secretins use different specific and general mechanisms for their targeting, assembly, and membrane insertion. We report that all tested secretins from several type II secretion systems and from the filamentous bacteriophage f1 can spontaneously multimerize and insert into liposomes in an in vitro transcription-translation system. Phylogenetic analyses indicate that these secretins form a group distinct from the secretins of the type IV piliation and type III secretion systems, which do not autoassemble in vitro. A mutation causing a proline-to-leucine substitution allowed PilQ secretins from two different type IV piliation systems to assemble in vitro, albeit with very low efficiency, suggesting that autoassembly is an inherent property of all secretins.

The type II secretion system: biogenesis, molecular architecture and mechanism

Many gram-negative bacteria use the sophisticated type II secretion system (T2SS) to translocate a wide range of proteins from the periplasm across the outer membrane. The inner-membrane platform of the T2SS is the nexus of the system and orchestrates the secretion process through its interactions with the periplasmic filamentous pseudopilus, the dodecameric outer-membrane complex and a cytoplasmic secretion ATPase. Here, recent structural and biochemical information is reviewed to describe our current knowledge of the biogenesis and architecture of the T2SS and its mechanism of action.