Structure of the Clostridium thermocellum gene licB and the encoded beta-1,3-1,4-glucanase. A catalytic region homologous to Bacillus lichenases joined to the reiterated domain of clostridial cellulases

A trimodular family 16 glycoside hydrolase from the cellulosome of Ruminococcus flavefaciens displays highly specific licheninase (EC 3.2.1.73) activity

Cellulosomes are highly complex cell-bound multi-enzymatic nanomachines used by anaerobes to break down plant carbohydrates. The genome sequence of Ruminococcus flavefaciens revealed a remarkably diverse cellulosome composed of more than 200 cellulosomal enzymes. Here we provide a detailed biochemical characterization of a highly elaborate R. flavefaciens cellulosomal enzyme containing an N-terminal dockerin module, which anchors the enzyme into the multi-enzyme complex through binding of cohesins located in non-catalytic cell-bound scaffoldins, and three tandemly repeated family 16 glycoside hydrolase (GH16) catalytic domains. The DNA sequence encoding the three homologous catalytic domains was cloned and hyper-expressed in Escherichia coli BL21 (DE3) cells. SDS-PAGE analysis of purified His₆ tag containing RfGH16_21 showed a single soluble protein of molecular size ~89 kDa, which was in agreement with the theoretical size, 89.3 kDa. The enzyme RfGH16_21 exhibited activity over a wide pH range (pH 5.0-8.0) and a broad temperature range (50-70 °C), displaying maximum activity at an optimum pH of 7.0 and optimum temperature of 55 °C. Substrate specificity analysis of RfGH16_21 revealed maximum activity against barley β-d-glucan (257 U mg^-1) followed by lichenan (247 U mg^-1), but did not show significant activity towards other tested polysaccharides, suggesting that it is specifically a β-1,3-1,4-endoglucanase. TLC analysis revealed that RfGH16_21 hydrolyses barley β-d-glucan to cellotriose, cellotetraose and a higher degree of polymerization of gluco-oligosaccharides indicating an endo-acting catalytic mechanism. This study revealed a fairly high, active and thermostable bacterial endo-glucanase which may find considerable biotechnological potentials.

Thermostable Lichenase from Clostridium thermocellum as a Host Protein in the Domain Insertion Approach

Clostridium thermocellum lichenase (endo-β-1,3;1,4-glucan-D-glycosyl hydrolase, EC 3.2.1.73 (P29716)) has been tested for the insertion of two model fluorescent proteins (EGFP and TagRFP) into two regions of this enzyme. Functional folding of the resulting proteins was confirmed by retention of lichenase activity and EGFP and TagRFP fluorescence. These results convincingly demonstrate that (i) the two experimentally selected lichenase loop regions may serve as the areas for domain insertion without disturbing enzyme folding in vivo; (ii) lichenase permits not only single but also tandem insertions of large protein domains. High specific activity, outstanding thermostability, and efficient in vitro refolding of thermostable lichenase make it an attractive new host protein for the insertional fusion of domains in the engineering of multifunctional proteins.

LacI Transcriptional Regulatory Networks in Clostridium thermocellum DSM1313

Organisms regulate gene expression in response to the environment to coordinate metabolic reactions. Clostridium thermocellum expresses enzymes for both lignocellulose solubilization and its fermentation to produce ethanol. One LacI regulator termed GlyR3 in C. thermocellum ATCC 27405 was previously identified as a repressor of neighboring genes with repression relieved by laminaribiose (a β-1,3 disaccharide). To better understand the three C. thermocellum LacI regulons, deletion mutants were constructed using the genetically tractable DSM1313 strain. DSM1313 lacI genes Clo1313_2023, Clo1313_0089, and Clo1313_0396 encode homologs of GlyR1, GlyR2, and GlyR3 from strain ATCC 27405, respectively. Growth on cellobiose or pretreated switchgrass was unaffected by any of the gene deletions under controlled-pH fermentations. Global gene expression patterns from time course analyses identified glycoside hydrolase genes encoding hemicellulases, including cellulosomal enzymes, that were highly upregulated (5- to 100-fold) in the absence of each LacI regulator, suggesting that these were repressed under wild-type conditions and that relatively few genes were controlled by each regulator under the conditions tested. Clo1313_2022, encoding lichenase enzyme LicB, was derepressed in a ΔglyR1 strain. Higher expression of Clo1313_1398, which encodes the Man5A mannanase, was observed in a ΔglyR2 strain, and α-mannobiose was identified as a probable inducer for GlyR2-regulated genes. For the ΔglyR3 strain, upregulation of the two genes adjacent to glyR3 in the celC-glyR3-licA operon was consistent with earlier studies. Electrophoretic mobility shift assays have confirmed LacI transcription factor binding to specific regions of gene promoters.IMPORTANCE Understanding C. thermocellum gene regulation is of importance for improved fundamental knowledge of this industrially relevant bacterium. Most LacI transcription factors regulate local genomic regions; however, a small number of those genes encode global regulatory proteins with extensive regulons. This study indicates that there are small specific C. thermocellum LacI regulons. The identification of LacI repressor activity for hemicellulase gene expression is a key result of this work and will add to the small body of existing literature on the area of gene regulation in C. thermocellum.

A launch vector for the production of vaccine antigens in plants

Historically, most vaccines have been based on killed or live-attenuated infectious agents. Although very successful at immunizing populations against disease, both approaches raise safety concerns and often have limited production capacity. This has resulted in increased emphasis on the development of subunit vaccines. Several recombinant systems have been considered for subunit vaccine manufacture, including plants, which offer advantages both in cost and in scale of production. We have developed a plant expression system utilizing a 'launch vector', which combines the advantageous features of standard agrobacterial binary plasmids and plant viral vectors, to achieve high-level target antigen expression in plants. As an additional feature, to aid in target expression, stability and purification, we have engineered a thermostable carrier molecule to which antigens are fused. We have applied this launch vector/carrier system to engineer and express target antigens from various pathogens, including, influenza A/Vietnam/04 (H5N1) virus.

From cellulosomes to cellulosomics

Cellulosomes are intricate multienzyme systems produced by several cellulolytic bacteria, the first example of which was discovered in the anaerobic thermophilic bacterium, Clostridium thermocellum. Cellulosomes are designed for efficient degradation of plant cell wall polysaccharides, notably cellulose--the most abundant renewable polymer on earth. The component parts of the multicomponent complex are integrated by virtue of a unique family of integrating modules, the cohesins and the dockerins, whose distribution and specificity dictate the overall cellulosome architecture. A full generation of research has elapsed since the original publications that documented the cellulosome concept. In this review, we provide a personal account on the discovery process, while describing how divergent cellulosome systems were identified and investigated, culminating in the collaboration of several labs worldwide to tackle together the challenging field of cellulosome genomics and metagenomics.

Isolation and identification of mixed linkedβ -glucan degrading bacteria in the intestine of broiler chickens and partial characterization of respective 1,3-1,4-β -glucanase activities

Media with 1,3-1,4-beta -glucans as selective markers were used for isolation of non-starch-polysaccharide (NSP) degrading bacteria from the intestinal tract of broiler chicken. Formerly unknown 1,3-1,4-beta endoglucanase activities in various bacterial species were identified in this study. E. faecium , Streptococcus , Bacteroides and Clostridium strains seem to be responsible for degradation of mixed linked beta -glucans in the small intestine and in the hind gut of chickens. Strict anaerobic bacteria (Bacteroides ovatus , B. uniformis , presumably B. capillosus and Clostridium perfringens ) as well as an unidentified bacterium with 98% 16S rDNA homology to an uncultered chicken cecum bacterium were isolated. Additionally, Streptococcus bovis with 1,3-1,4-beta -endoglucanase activity was also detected. Different 1,3-1,4-beta -endoglucanase activity profiles were observed in SDS/PAGE zymograms.

Cellulase, clostridia, and ethanol

Biomass conversion to ethanol as a liquid fuel by the thermophilic and anaerobic clostridia offers a potential partial solution to the problem of the world's dependence on petroleum for energy. Coculture of a cellulolytic strain and a saccharolytic strain of Clostridium on agricultural resources, as well as on urban and industrial cellulosic wastes, is a promising approach to an alternate energy source from an economic viewpoint. This review discusses the need for such a process, the cellulases of clostridia, their presence in extracellular complexes or organelles (the cellulosomes), the binding of the cellulosomes to cellulose and to the cell surface, cellulase genetics, regulation of their synthesis, cocultures, ethanol tolerance, and metabolic pathway engineering for maximizing ethanol yield.

Molecular modeling of family GH16 glycoside hydrolases: potential roles for xyloglucan transglucosylases/hydrolases in cell wall modification in the poaceae

Family GH16 glycoside hydrolases can be assigned to five subgroups according to their substrate specificities, including xyloglucan transglucosylases/hydrolases (XTHs), (1,3)-beta-galactanases, (1,4)-beta-galactanases/kappa-carrageenases, "nonspecific" (1,3/1,3;1,4)-beta-D-glucan endohydrolases, and (1,3;1,4)-beta-D-glucan endohydrolases. A structured family GH16 glycoside hydrolase database has been constructed (http://www.ghdb.uni-stuttgart.de) and provides multiple sequence alignments with functionally annotated amino acid residues and phylogenetic trees. The database has been used for homology modeling of seven glycoside hydrolases from the GH16 family with various substrate specificities, based on structural coordinates for (1,3;1,4)-beta-D-glucan endohydrolases and a kappa-carrageenase. In combination with multiple sequence alignments, the models predict the three-dimensional (3D) dispositions of amino acid residues in the substrate-binding and catalytic sites of XTHs and (1,3/1,3;1,4)-beta-d-glucan endohydrolases; there is no structural information available in the databases for the latter group of enzymes. Models of the XTHs, compared with the recently determined structure of a Populus tremulos x tremuloides XTH, reveal similarities with the active sites of family GH11 (1,4)-beta-D-xylan endohydrolases. From a biological viewpoint, the classification, molecular modeling and a new 3D structure of the P. tremulos x tremuloides XTH establish structural and evolutionary connections between XTHs, (1,3;1,4)-beta-D-glucan endohydrolases and xylan endohydrolases. These findings raise the possibility that XTHs from higher plants could be active not only on cell wall xyloglucans, but also on (1,3;1,4)-beta-D-glucans and arabinoxylans, which are major components of walls in grasses. A role for XTHs in (1,3;1,4)-beta-D-glucan and arabinoxylan modification would be consistent with the apparent overrepresentation of XTH sequences in cereal expressed sequence tags databases.

Crystal structure of a natural circularly permuted jellyroll protein: 1,3-1,4-beta-D-glucanase from Fibrobacter succinogenes

The 1,3-1,4-beta-D-glucanase from Fibrobacter succinogenes (Fsbeta-glucanase) is classified as one of the family 16 glycosyl hydrolases. It hydrolyzes the glycosidic bond in the mixed-linked glucans containing beta-1,3- and beta-1,4-glycosidic linkages. We constructed a truncated form of recombinant Fsbeta-glucanase containing the catalytic domain from amino acid residues 1-258, which exhibited a higher thermal stability and enzymatic activity than the full-length enzyme. The crystal structure of the truncated Fsbeta-glucanase was solved at a resolution of 1.7A by the multiple wavelength anomalous dispersion (MAD) method using the anomalous signals from the seleno-methionine-labeled protein. The overall topology of the truncated Fsbeta-glucanase consists mainly of two eight-stranded anti-parallel beta-sheets arranged in a jellyroll beta-sandwich, similar to the fold of many glycosyl hydrolases and carbohydrate-binding modules. Sequence comparison with other bacterial glucanases showed that Fsbeta-glucanase is the only naturally occurring circularly permuted beta-glucanase with reversed sequences. Structural comparison shows that the engineered circular-permuted Bacillus enzymes are more similar to their parent enzymes with which they share approximately 70% sequence identity, than to the naturally occurring Fsbeta-glucanase of similar topology with 30% identity. This result suggests that protein structure relies more on sequence identity than topology. The high-resolution structure of Fsbeta-glucanase provides a structural rationale for the different activities obtained from a series of mutant glucanases and a basis for the development of engineered enzymes with increased activity and structural stability.

Lic16A of Clostridium thermocellum, a non-cellulosomal, highly complex endo-beta-1,3-glucanase bound to the outer cell surface

Clostridium thermocellum produces one major beta-1,3-glucanase. Genomic DNA fragments containing the gene were cloned from two strains, DSM1237(T) (6848 bp) and F7 (9766 bp). Overlapping sequences were 99.9 % identical. The nucleotide sequences contained reading frames for a putative transposase, endo-beta-1,3-1,4-glucanase CelC, a putative transcription regulator of the LacI type, beta-1,3-glucanase Lic16A and a putative membrane protein. The licA genes of both strains encoded an identical protein of 1324 aa with a calculated molecular mass of 148 kDa. Lic16A is an unusually complex protein consisting of a leader peptide, a threefold repeat of an S-layer homologous module (SLH), an unknown module, a catalytic module of glycosyl hydrolase family 16 and a fourfold repeat of a carbohydrate-binding module of family CBM4a. The recombinant Lic16A protein was characterized as an endo-1,3(4)-beta-glucanase with a specific activity of 2680 and 340 U mg(-1) and a K(m) of 0.94 and 2.1 mg ml(-1) towards barley beta-glucan and laminarin, respectively. It was specific for beta-glucans containing beta-1,3-linkages with an optimum temperature of 70 degrees C at pH 6.0. The N-terminal SLH modules were cleaved from the protein as well in Escherichia coli as in C. thermocellum, but nevertheless bound tightly to the rest of the protein. Lic16A was located on the cell surface from which it could be purified after fractionated solubilization. Its inducible production allowed C. thermocellum to grow on beta-1,3- or beta-1,3-1,4-glucan.

Swaps in protein sequences

An important question in protein evolution is to what extent proteins may have undergone swaps (switches of domain or fragment order) during evolution. Such events might have occurred in several forms: Swaps of short fragments, swaps of structural and functional motifs, or recombination of domains in multidomain proteins. This question is important for the theoretical understanding of the evolution of proteins, and has practical implications for using swaps as a design tool in protein engineering. In order to analyze the question systematically, we conducted a large scale survey of possible swaps and permutations among all pairs of protein from the Swissport database. A swap is defined as a specific kind of sequence mutation between two proteins in which two fragments that appear in both sequences have different relative order in the two sequences. For example, aXbYc and dYeXf are defined as a swap, where X and Y represent sequence fragments that switched their order. Identifying such swaps is difficult using standard sequence comparison packages. One of the main problems in the analysis stems from the fact that many sequences contain repeats, which may be identified as false-positive swaps. We have used two different approaches to detect pairs of proteins with swaps. The first approach is based on the predefined list of domains in Pfam. We identified all the proteins that share at least two domains and analyzed their relative order, looking for pairs in which the order of these domains was switched. We designed an algorithm to distinguish between real swaps and duplications. In the second approach, we used Blast to detect pairs of proteins that share several fragments. Then, we used an automatic procedure to select pairs that are likely to contain swaps. Those pairs were analyzed visually, using a graphical tool, to eliminate duplications. Combining these approaches, about 140 different cases of swaps in the Swissprot database were found (after eliminating multiple pairs within the same family). Some of the cases have been described in the literature, but many are novel examples. Although each new example identified may be interesting to analyze, our main conclusion is that cases of swaps are rare in protein evolution. This observation is at odds with the common view that proteins are very modular to the point that modules (e.g., domains) can be shuffled between proteins with minimal constraints. Our study suggests that sequential constraints, i.e., the relative order between domains, are highly conserved.

Mutagenesis of Trp(54) and Trp(203) residues on Fibrobacter succinogenes 1,3-1,4-beta-D-glucanase significantly affects catalytic activities of the enzyme

The possible structural and catalytic functions of the nine tryptophan amino acid residues, including Trp(54), Trp(105), Trp(112), Trp(141), Trp(148), Trp(165), Trp(186), Trp(198), and Trp(203) in Fibrobacter succinogenes 1,3-1,4-beta-D-glucanase (Fs beta-glucanase), were characterized using site-directed mutagenesis, initial rate kinetics, fluorescence spectrometry, and structural modeling analysis. Kinetic studies showed that a 5-7-fold increase in K(m) value for lichenan was observed for W141F, W141H, and W203R mutant Fs beta-glucanases, and approximately 72-, 56-, 30-, 29.5-, 4.9-, and 4.3-fold decreases in k(cat) relative to that for the wild-type enzyme were observed for the W54F, W54Y, W141H, W203R, W141F, and W148F mutants, respectively. In contrast, W186F and W203F, unlike the other 12 mutants, exhibited a 1.4- and 4.2-fold increase in k(cat), respectively. W165F and W203R were the only two mutants that exhibited a 4-7-fold higher activity relative to the wild-type enzyme after they were incubated at pH 3.0 for 1 h. Fluorescence spectrometry indicated that all of the mutations on the nine tryptophan amino acid residues retained a folding similar to that of the wild-type enzyme. Structural modeling and kinetic studies suggest that Trp(54), Trp(141), Trp(148), and Trp(203) play important roles in maintaining structural integrity in the substrate-binding cleft and the catalytic efficiency of the enzyme.

Essential catalytic role of Glu134in endo-β-1,3-1,4-d-glucan 4-glucanohydrolase fromB. licheniformisas determined by site-directed mutagenesis

Site-directed mutagenesis experiments designed to identify the active site of Bacillus licheniformis endo-beta-1,3-1,4-D-glucan 4-glucanohydrolase (beta-glucanase) have been performed. Putative catalytic residues were chosen on the basis of sequence similarity analysis to viral and eukaryotic lysozymes. Four mutant enzymes were expressed and purified from recombinant E. coli and their kinetics analysed with barley beta-glucan. Replacement of Glu134 by Gln produced a mutant (E134Q) that retains less than 0.3% of the wild-type activity. The other mutants, D133N, E160Q and D179N, are active but show different kinetic parameters relative to wild-type indicative of their participation in substrate binding and transition-state complex stabilization. Glu134 is essential for activity; it is comprised in a region of high sequence similarity to the active site of T4 lysozyme and matches the position of the general acid catalyst. These results strongly support a lysozyme-like mechanism for this family of Bacillus beta-glucan hydrolases with Glu134 being the essential acid catalyst.

EndB, a multidomain family 44 cellulase from Ruminococcus flavefaciens 17, binds to cellulose via a novel cellulose-binding module and to another R. flavefaciens protein via a dockerin domain

The mechanisms by which cellulolytic enzymes and enzyme complexes in Ruminococcus spp. bind to cellulose are not fully understood. The product of the newly isolated cellulase gene endB from Ruminococcus flavefaciens 17 was purified as a His-tagged product after expression in Escherichia coli and found to be able to bind directly to crystalline cellulose. The ability to bind cellulose is shown to be associated with a novel cellulose-binding module (CBM) located within a region of 200 amino acids that is unrelated to known protein sequences. EndB (808 amino acids) also contains a catalytic domain belonging to glycoside hydrolase family 44 and a C-terminal dockerin-like domain. Purified EndB is also shown to bind specifically via its dockerin domain to a polypeptide of ca. 130 kDa present among supernatant proteins from Avicel-grown R. flavefaciens that attach to cellulose. The protein to which EndB attaches is a strong candidate for the scaffolding component of a cellulosome-like multienzyme complex recently identified in this species (S.-Y. Ding et al., J. Bacteriol. 183:1945-1953, 2001). It is concluded that binding of EndB to cellulose may occur both through its own CBM and potentially also through its involvement in a cellulosome complex.

A Bacillus amyloliquefaciens ChbB protein binds beta- and alpha-chitin and has homologues in related strains

A small (19.8 kDa) protein was identified in Bacillus amyloliquefaciens ALKO 2718 cultures during growth in the presence of yeast extract and chitin, but not with glucose. The protein targets beta-chitin best, then alpha-chitin, but barely any other polysaccharide. This described chitin-binding protein (ChbB) is the first of its type from a Bacillus strain and cross-reacts with antibodies raised against the Streptomyces alpha-chitin-binding protein CHB1. Using reverse genetics, the chromosomal chbB gene of strain ALKO 2718 was identified, cloned and sequenced. ChbB shares several motifs with the alpha-chitin-binding proteins CHB1 and CHB2 of Streptomyces and CBP21 of Serratia marcescens predominantly targeting beta-chitin. Synthesis was repressed by glucose and the presence of cre boxes suggests catabolite control. Using PCR, Southern hybridization and anti-ChbB antibodies, the presence of a chbB gene, as well as of a ChbB protein homologue, was ascertained in several tested B. amyloliquefaciens strains, but not in Bacillus subtilis 168. Contrary to B. subtilis 168, all B. amyloliquefaciens strains secreted varying amounts of enzymic activity, degrading carboxymethyl chitin coupled with Remazol brilliant violet.

Directed mutagenesis of apecific active site residues on Fibrobacter succinogenes 1,3-1,4-beta -D-glucanase significantly affects catalysis and enzyme structural stability

The functional and structural significance of amino acid residues Met(39), Glu(56), Asp(58), Glu(60), and Gly(63) of Fibrobacter succinogenes 1,3-1,4-beta-d-glucanase was explored by the approach of site-directed mutagenesis, initial rate kinetics, fluorescence spectroscopy, and CD spectrometry. Glu(56), Asp(58), Glu(60), and Gly(63) residues are conserved among known primary sequences of the bacterial and fungal enzymes. Kinetic analyses revealed that 240-, 540-, 570-, and 880-fold decreases in k(cat) were observed for the E56D, E60D, D58N, and D58E mutant enzymes, respectively, with a similar substrate affinity relative to the wild type enzyme. In contrast, no detectable enzymatic activity was observed for the E56A, E56Q, D58A, E60A, and E60Q mutants. These results indicated that the carboxyl side chain at positions 56 and 60 is mandatory for enzyme catalysis. M39F, unlike the other mutants, exhibited a 5-fold increase in K(m) value. Lower thermostability was found with the G63A mutant when compared with wild type or other mutant forms of F. succinogenes 1,3-1,4-beta-d-glucanase. Denatured wild type and mutant enzymes were, however, recoverable as active enzymes when 8 m urea was employed as the denaturant. Structural modeling and kinetic studies suggest that Glu(56), Asp(58), and Glu(60) residues apparently play important role(s) in the catalysis of F. succinogenes 1,3-1,4-beta-d-glucanase.

Bacterial 1,3-1,4-beta-glucanases: structure, function and protein engineering

1,3-1,4-beta-Glucanases (or lichenases, EC 3.2.1.73) hydrolyse linear beta-glucans containing beta-1,3 and beta-1,4 linkages such as cereal beta-glucans and lichenan, with a strict cleavage specificity for beta-1,4 glycosidic bonds on 3-O-substituted glucosyl residues. The bacterial enzymes are retaining glycosyl hydrolases of family 16 with a jellyroll beta-sandwich fold and a substrate binding cleft composed of six subsites. The present paper reviews the structure-function aspects of the enzymatic action including mechanistic enzymology, protein engineering and X-ray crystallographic studies.

Characterization of a beta-1,3-glucanase encoded by chlorella virus PBCV-1

Sequence analysis of the 330-kb chlorella virus PBCV-1 genome revealed an open-reading frame, A94L, that encodes a protein with significant amino acid identity to Glycoside Hydrolase Family 16 beta-1,3-glucanases. The a94l gene was cloned and the protein was expressed as a GST-A94L fusion protein in Escherichia coli. The recombinant A94L protein hydrolyzed the beta-1,3-glucose polymer laminarin and had slightly less hydrolytic activity on beta-1,3-1, 4-glucose polymers, lichenan and barley beta-glucan. The recombinant enzyme had the highest activity at 65 degrees C and pH 8. We predicted that the a94l-encoded beta-1,3-glucanase is involved in degrading the host cell wall either during virus release and/or is packaged in the virion particle and involved in virus entry. Therefore, we expected a94l to be expressed late in virus infection. However, contrary to expectations, both the a94l mRNA and the A94L protein appeared 15 min after PBCV-1 infection and disappeared 60- and 120-min p.i. postinfection, respectively, indicating that a94l is an early gene. Twenty-seven of 42 chlorella viruses contained the a94l gene. To our knowledge, this is the first report of a virus-encoded beta-1,3-glucanase.

Three multidomain esterases from the cellulolytic rumen anaerobe Ruminococcus flavefaciens 17 that carry divergent dockerin sequences

Three enzymes carrying esterase domains have been identified in the rumen cellulolytic anaerobe Ruminococcus flavefaciens 17. The newly characterized CesA gene product (768 amino acids) includes an N-terminal acetylesterase domain and an unidentified C-terminal domain, while the previously characterized XynB enzyme (781 amino acids) includes an internal acetylesterase domain in addition to its N-terminal xylanase catalytic domain. A third gene, xynE, is predicted to encode a multidomain enzyme of 792 amino acids including a family 11 xylanase domain and a C-terminal esterase domain. The esterase domains from CesA and XynB share significant sequence identity (44%) and belong to carbohydrate esterase family 3; both domains are shown here to be capable of deacetylating acetylated xylans, but no evidence was found for ferulic acid esterase activity. The esterase domain of XynE, however, shares 42% amino acid identity with a family 1 phenolic acid esterase domain identified from Clostridum thermocellum XynZ. XynB, XynE and CesA all contain dockerin-like regions in addition to their catalytic domains, suggesting that these enzymes form part of a cellulosome-like multienzyme complex. The dockerin sequences of CesA and XynE differ significantly from those previously described in R. flavefaciens polysaccharidases, including XynB, suggesting that they might represent distinct dockerin specificities.

A pattern-recognition protein for beta-1,3-glucan. The binding domain and the cDNA cloning of beta-1,3-glucan recognition protein from the silkworm, Bombyx mori

The beta-1,3-glucan recognition protein (betaGRP) has strong specific affinity for beta-1,3-glucan, a component of the fungal cell wall. Its interaction with beta-1,3-glucan initiates the activation of the prophenoloxidase cascade, which is an important defense system in invertebrates of many species. We cloned the cDNA of the betaGRP of the silkworm Bombyx mori. The betaGRP mRNA transcript was constitutively expressed in the hemocytes, fat body, and epithelial cells of the naive silkworm. At the same time, a bacterial or yeast challenge was indicated to intensify the transcription. Comparison of the deduced amino acid sequence with known sequences revealed that the betaGRP contained a region (Thr(264) to Pro(386)) displaying significant similarity to the catalytic regions of bacterial beta-1,3-glucanases and much higher similarity to the glucanase-like regions of Gram-negative bacteria-binding proteins found in the silkworm B. mori and the mosquito Anopheles gambiae. The region (Thr(264) to Pro(386)) of the betaGRP, however, was demonstrated not to have appreciable affinity for beta-1,3-glucan. A recombinant peptide corresponding to an N-terminal region (Tyr(1) to Ala(102)) of the betaGRP bound strongly to beta-1,3-glucan. These results indicate that the binding domain of the betaGRP for beta-1,3-glucan is located in the N-terminal region. Glucanases and the current pattern-recognition proteins that contain a glucanase-like region seem to have a common origin in their molecular evolution.

An endoglucanase, EglA, from the hyperthermophilic archaeon Pyrococcus furiosus hydrolyzes beta-1,4 bonds in mixed-linkage (1-->3),(1-->4)-beta-D-glucans and cellulose

The eglA gene, encoding a thermostable endoglucanase from the hyperthermophilic archaeon Pyrococcus furiosus, was cloned and expressed in Escherichia coli. The nucleotide sequence of the gene predicts a 319-amino-acid protein with a calculated molecular mass of 35.9 kDa. The endoglucanase has a 19-amino-acid signal peptide but not cellulose-binding domain. The P. furiosus endoglucanase has significant amino acid sequence similarities, including the conserved catalytic nucleophile and proton donor, with endoglucanases from glucosyl hydrolase family 12. The purified recombinant enzyme hydrolyzed beta-1,4 but not beta-1,3 glucosidic linkages and had the highest specific activity on cellopentaose (degree of polymerization [DP] = 5) and cellohexaose (DP = 6) oligosaccharides. To a lesser extent, EglA also hydrolyzed shorter cellodextrins (DP < 5) as well as the amorphous portions of polysaccharides which contain only beta-1,4 bonds such as carboxymethyl cellulose, microcrystalline cellulose, Whatman paper, and cotton linter. The highest specific activity toward polysaccharides occurred with mixed-linkage beta-glucans such as barley beta-glucan and lichenan. Kinetics studies with cellooliogsaccharides and p-nitrophenyl-cellooligosaccharides indicated that the enzyme had three glucose binding subsites (-I, -II, and -III) for the nonreducing end and two glucose binding subsites (+I and +II) for the reducing end from the scissile glycosidic linkage. The enzyme had temperature and pH optima of 100 degreesC and 6.0, respectively; a half-life of 40 h at 95 degreesC; and a denaturing temperature of 112 degreesC as determined by differential scanning calorimetry. The discovery of a thermostable enzyme with this substrate specificity has implications for both the evolution of enzymes involved in polysaccharide hydrolysis and the occurrence of growth substrates in hydrothermal vent environments.

Integrative vector for stable transformation and expression of a beta-1,3-glucanase gene in Clavibacter xyli subsp. cynodontis

Clavibacter xyli subsp. cynodontis is an endophytic Gram-positive bacterium that is able to colonize the xylem tissue of various plants. We constructed an integrative vector that can carry foreign genes into a repetitive chromosomal element of C. xyli subsp. cynodontis. Using this vector, we transformed C. xyli subsp. cynodontis with a gene coding for an endoglucanase enzyme under the control of a strong promoter that was previously isolated from the genome of C. xyli subsp. cynodontis. The transformed bacteria efficiently expressed active glucanase and secreted it into the culture medium. The vector has the advantage of being stably maintained in the chromosome; the transformations were maintained without antibiotic selection both in in vitro culture and in bacteria growing in maize xylem.

Properties of exgS, a gene for a major subunit of the Clostridium cellulovorans cellulosome

The nucleotide sequence of P70, one of the three major subunits of the Clostridium cellulovorans cellulosome, has been determined. The gene designated as exgS (Genbank Accession No. U34793) consists of 2112 bp and encodes a protein containing 703 amino acids with a molecular mass of 77.7 kDa. ExgS has a putative signal peptide sequence of 32 amino acids. The N-terminal region is separated from the C-terminal region by a short-Pro-Thr-Pro linker. The C-terminal region of ExgS contains a duplicated sequence (DS), each sequence consisting of 22 amino acids. exgS, located 67 bp downstream of cbpA in the chromosome, is immediately upstream of a gene encoding a family 9 type endoglucanase that we have designated as EngH. This gene cluster to date consists of regA-cbpA-exgS-engH. Recombinant ExgS (rExgS) containing no signal peptide was expressed in E. coli. The rExgS actively digested several forms of cellulose, including Avicel, Sigmacell101, crystalline cellulose, and xylan, but not carboxymethyl cellulose (CMC). Cellotetraose was the smallest oligosaccharide substrate for rExgS. The enzymatic studies indicated that ExgS was an exoglucanase and had some properties similar to that of CelS from C. thermocellum and CelF from C.cellulolyticum. An exoglucanase has now been found to be a component of the C. cellulovorans cellulosome as well as the previously reported endoglucanases.

Cellulase and hemicellulase genes of Clostridium thermocellum from five independent collections contain few overlaps and are widely scattered across the chromosome

Five independent collections, comprising a total of 34 clones encoding cellulases, hemicellulases and cell surface proteins of Clostridium thermocellum, were searched for overlapping or contiguous DNA fragments. The clones were hybridized to large genomic restriction fragments separated by pulse-field electrophoresis. Clones hybridizing to the same fragment were further compared by hybridization to smaller fragments, by cross-hybridization and by restriction mapping. The probes hybridized to loci which were usually not clustered and were scattered over at least one third of the chromosome. Besides previously identified clusters, only two clones were found to be adjacent. Two pairs of clones appeared to contain the same genes cloned in duplicate, and one of the genes was shown to be cloned in triplicate.

Crystal structures and properties of de novo circularly permuted 1,3-1,4-beta-glucanases

The 1,3-1,4-beta-glucanases from Bacillus macerans and Bacillus licheniformis, as well as related hybrid enzymes, are stable proteins comprised of one compact jellyroll domain. Their structures are studied in an effort to reveal the degree of redundancy to which the three-dimensional structure of protein domains is encoded by the amino acid sequence. For the hybrid 1,3-1,4-beta-glucanase H(A16-M), it could be shown recently that a circular permutation of the sequence giving rise to the variant cpA16M-59 is compatible with wildtype-like enzymatic activity and tertiary structure (Hahn et al., Proc. Natl. Acad. Sci. USA 91:10417-10421, 1994). Since the circular permutation yielding cpA16M-59 mimicks that found in the homologous enzyme from Fibrobacter succinogenes, the question arose whether de novo circular permutations, not guided by molecular evolution of the 1,3-1,4-beta-glucanases, could also produce proteins with native-like fold. The circularly permuted variants cpA16M-84, cpA16M-127, and cpA16M-154 were generated by PCR mutagenesis of the gene encoding H(A16-M), synthesized in Escherichia coli and shown to be active in beta-glucan hydrolysis. CpA16M-84 and cpA16M-127 were crystallized in space groups P2(1) and P1, respectively, and their crystal structures were determined at 1.80 and 2.07 A resolution. In both proteins the main parts of the beta-sheet structure remain unaffected by the circular permutation as is evident from a root-mean-square deviation of main chain atoms from the reference structure within the experimental error. The only major structural perturbation occurs near the novel chain termini in a surface loop of cpA16M-84, which becomes destabilized and rearranged. The results of this study are interpreted to show that: (1) several circular permutations in the compact jellyroll domain of the 1,3-1,4-beta-glucanases are tolerated without radical change of enzymatic activity or tertiary structure, (2) the three-dimensional structures of simple domains are encoded by the amino acid sequence with sufficient redundancy to tolerate a change in the sequential order of secondary structure elements along the sequence, and (3) the native N-terminal region is not needed to guide the folding polypeptide chain toward its native conformation.

Cloning and targeted disruption of MLG1, a gene encoding two of three extracellular mixed-linked glucanases of Cochliobolus carbonum

Mixed-linked glucanases (MLGases), which are extracellular enzymes able to hydrolyze beta 1,3-1,4-glucans (also known as mixed-linked glucans or cereal beta-glucans), were identified in culture filtrates of the plant-pathogenic fungus Cochliobolus carbonum. Three peaks of MLGase activity, designated Mlg1a, Mlg1b, and Mlg2, were resolved by cation-exchange and hydrophobic-interaction high-performance liquid chromatography (HPLC). Mlg1a and Mlg1b also hydrolyze beta 1,3-glucan (laminarin), whereas Mlg2 does not degrade beta 1,3-glucan but does degrade beta 1,4-glucan to a slight extent. Mlg1a, Mlg1b, and Mlg2 have monomer molecular masses of 33.5, 31, and 29.5 kDa, respectively. The N-terminal amino acid sequences of Mlg1a and Mlg1b are identical (AAYNLI). Mlg1a is glycosylated, whereas Mlg1b is not. The gene encoding Mlg1b, MLG1, was isolated by using PCR primers based on amino acid sequences of Mlg1b. The product of MLG1 has no close similarity to any known protein but does contain a motif (EIDI) that occurs at the active site of MLGases from several prokaryotes. An internal fragment of MLG1 was used to create mlg1 mutants by transformation-mediated gene disruption. The total MLGase and beta 1,3-glucanase activities in culture filtrates of the mutants were reduced by approximately 50 and 40%, respectively. When analyzed by cation-exchange HPLC, the mutants were missing the two peaks of MLGase activity corresponding to Mlg1a and Mlg1b. Together, the data indicate that Mlg1a and Mlg1b are products of the same gene, MLG1. The growth of mlg1 mutants in culture medium supplemented with macerated maize cell walls or maize bran and the disease symptoms on maize were identical to the growth and disease symptoms of the wild type.

Genetic determinants of immunity and integration of temperate Myxococcus xanthus phage Mx8

An 8.1-kb fragment of the temperate Myxococcus xanthus phage Mx8 genome, when cloned into a plasmid vector, permits site-specific integration of the plasmid and confers superinfection immunity. Sequence analysis of a 9.5-kb region of Mx8 DNA containing this fragment reveals 19 densely packed open reading frames, four of which have predicted products with known or suspected activities. The Mx8 imm gene, required for superinfection immunity, has a sequence similar to that of Arabidopsis thaliana G-box-binding factor 1. Mx8 makes a DNA adenine methylase, Mox, and integrase, Int, related to other methylases and integrases. The int gene has two alternate translation initiation codons within the extensively overlapping uoi (upstream of int) gene. Comparison of the predicted product of the uoi gene with Salmonella phage P22 and Streptomyces plasmid Xis proteins shows that temperate phage excisionases may use variations of a helix-turn-helix motif to recognize specific DNA sequences.

Molecular and biochemical characterization of an endo-beta-1,3- glucanase of the hyperthermophilic archaeon Pyrococcus furiosus

We report here the first molecular characterization of an endo-beta-1,3-glucanase from an archaeon. Pyrococcus furiosus is a hyperthermophilic archaeon that is capable of saccharolytic growth. The isolated lamA gene encodes an extracellular enzyme that shares homology with both endo-beta-1,3- and endo-beta-1,3-1,4-glucanases of the glycosyl hydrolase family 16. After deletion of the N-terminal leader sequence, a lamA fragment encoding an active endo-beta-1,3-glucanase was overexpressed in Escherichia coli using the T7-expression system. The purified P. furiosus endoglucanase has highest hydrolytic activity on the beta-1,3-glucose polymer laminarin and has some hydrolytic activity on the beta-1,3-1,4 glucose polymers lichenan and barley beta-glucan. The enzyme is the most thermostable endo-beta-1,3-glucanase described up to now; it has optimal activity at 100-105 degrees C. In the predicted active site of glycosyl hydrolases of family 16 that show predominantly endo-beta-1,3-glucanase activity, an additional methionine residue is present. Deletion of this methionine did not change the substrate specificity of the endoglucanase, but it did cause a severe reduction in its catalytic activity, suggesting a structural role of this residue in constituting the active site. High performance liquid chromatography analysis showed in vitro hydrolysis of laminarin by the endo-beta-1,3-glucanase proceeds more efficiently in combination with an exo-beta-glycosidase from P. furiosus (CelB). This most probably reflects the physiological role of these enzymes: cooperation during growth of P. furiosus on beta-glucans.

Physiology of carbohydrate to solvent conversion by clostridia

The solvent-forming clostridia have attracted interest because of their ability to convert a range of carbohydrates to end-products such as acetone, butanol and ethanol. Polymeric substrates such as cellulose, hemicellulose and starch are degraded by extracellular enzymes. The majority of cellulolytic clostridia, typified by Clostridium thermocellum, produce a multi-enzyme cellulase complex in which the organization of components is critical for activity against the crystalline substrate. A variety of enzymes involved in degradation of hemicellulose and starch have been identified in different strains. The products of degradation, and other soluble substrates, are accumulated via membrane-bound transport systems which are generally poorly characterized. It is clear, however, that the phosphoenolpyruvate-dependent phosphotransferase system (PTS) plays a major role in solute uptake in several species. Accumulated substrates are converted by intracellular enzymes to end-products characteristic of the organism, with production of ATP to support growth. The metabolic pathways have been described, but understanding of mechanisms of regulation of metabolism is incomplete. Synthesis of extracellular enzymes and membrane-bound transport systems is commonly subject to catabolite repression in the presence of a readily metabolized source of carbon and energy. While many genes encoding cellulases, xylanases and amylases have been cloned and sequenced, little is known of control of their expression. Although the mechanism of catabolite repression in clostridia is not understood, some recent findings implicate a role for the PTS as in other low G-C Gram-positive bacteria. Emphasis has been placed on describing the mechanisms underlying the switch of C. acetobutylicum fermentations from acidogenic to solventogenic metabolism at the end of the growth phase. Factors involved include a lowered pH and accumulation of undissociated butyric acid, intracellular concentration of ATP and reduced pyridine nucleotides, nutrient limitation, and the interplay between pathways of carbon and electron flow. Genes encoding enzymes of solvent pathways have been cloned and sequenced, and their expression correlated with the pattern of end-product formation in fermentations. There is evidence that the initiation of solvent formation may be subject to control mechanisms similar to other stationary-phase phenomena, including sporulation. The application of recently developed techniques for genetic manipulation of the bacterium is improving understanding of the regulatory circuits, but a complete molecular description of the control of solvent formation remains elusive. Experimental manipulation of the pathways of electron flow in other species has been shown to influence the range and yield of fermentation end-products. Acid-forming clostridia can, under appropriate conditions, be induced to form atypical solvents as products. While the mechanisms of regulation of gene expression are not at all understood, the capacity to adapt in this way further illustrates the metabolic flexibility of clostridial strains.

Sequencing of a 1,3-1,4-beta-D-glucanase (lichenase) from the anaerobic fungus Orpinomyces strain PC-2: properties of the enzyme expressed in Escherichia coli and evidence that the gene has a bacterial origin

A 971-bp cDNA, designated licA, was obtained from a library of Orpinomyces sp. strain PC-2 constructed in Escherichia coli. It had an open reading frame of 738 nucleotides encoding LicA (1,3-1,4-beta-D-glucanase; lichenase) (EC 3.2.1.73) of 245 amino acids with a calculated molecular mass of 27,929 Da. The deduced amino acid sequence had high homology with bacterial beta-glucanases, particularly in the central regions and toward the C-terminal halves of bacterial enzymes. LicA had no homology with plant beta-glucanases. The genomic DNA region coding for LicA was devoid of introns. More than 95% of the recombinant beta-glucanase produced in E. coli cells was found in the culture medium and periplasmic space. A N-terminal signal peptide of 29 amino residues was cleaved from the enzyme secreted from Orpinomyces, whereas 21 amino acid residues of the signal peptide were removed when the enzyme was produced by E. coli. The beta-glucanase produced by E. coli was purified from the culture medium. It had a molecular mass of 27 kDa on sodium dodecyl sulfate-polyacrylamide gels. The Km and Vmax values with lichenin as the substrate at pH 6.0 and 40 degrees C were 0.75 mg/ml and 3,790 micromol/min/mg, respectively. With barley beta-glucan as the substrate, the corresponding values were 0.91 mg/ml and 5,320 micromol/min/mg. This enzyme did not hydrolyze laminarin, carboxymethylcellulose, pustulan, or xylan. The main products of lichenin and barley beta-glucan hydrolysis were triose and tetraose. LicA represented the first 1,3-1,4-beta-D-glucanase reported from fungi. The results presented suggest that licA of Orpinomyces had a bacterial origin.

Sequence of xynC and properties of XynC, a major component of the Clostridium thermocellum cellulosome

The nucleotide sequence of the Clostridium thermocellum F1 xynC gene, which encodes the xylanase XynC, consists of 1,857 bp and encodes a protein of 619 amino acids with a molecular weight of 69,517. XynC contains a typical N-terminal signal peptide of 32 amino acid residues, followed by a 165-amino-acid sequence which is homologous to the thermostabilizing domain. Downstream of this domain was a family 10 catalytic domain of glycosyl hydrolase. The C terminus separated from the catalytic domain by a short linker sequence contains a dockerin domain responsible for cellulosome assembly. The N-terminal amino acid sequence of XynC-II, the enzyme purified from a recombinant Escherichia coli strain, was in agreement with that deduced from the nucleotide sequence although XynC-II suffered from proteolytic truncation by a host protease(s) at the C-terminal region. Immunological and N-terminal amino acid sequence analyses disclosed that the full-length XynC is one of the major components of the C. thermocellum cellulosome. XynC-II was highly active toward xylan and slightly active toward p-nitrophenyl-beta-D-xylopyranoside, p-nitrophenyl-beta-D-cellobioside, p-nitrophenyl-beta-D-glucopyranoside, and carboxymethyl cellulose. The Km and Vmax values for xylan were 3.9 mg/ml and 611 micromol/min/mg of protein, respectively. This enzyme was optimally active at 80 degrees C and was stable up to 70 degrees C at neutral pHs and over the pH range of 4 to 11 at 25 degrees C.

Circular permutations of natural protein sequences: structural evidence

Over the past few years, evidence has accumulated that shows that circularly permuted proteins resulting from permutations in their coding genes can indeed occur naturally. In most instances, these circularly permuted amino acid sequences have been detected by sequence alignment of homologous proteins. Circular permutations may escape detection, however, when based on sequence comparisons alone, as recently illustrated by transaldolase, a member of the class I aldolase family.

Highly thermostable endo-1,3-beta-glucanase (laminarinase) LamA from Thermotoga neapolitana: nucleotide sequence of the gene and characterization of the recombinant gene product

The nucleotide sequence of clone pTT26 (3786 bp), containing the gene for 1,3-beta-glucanase LamA (laminarinase) from Thermotoga neapolitana, was determined. It contains an ORF encoding a protein of 646 aa (73328 Da). The central part of the protein is homologous to the complete catalytic domain of bacterial and some eukaryotic endo-1,3-beta-D-glucanases and belongs to family 16 of glycosyl hydrolases. This domain is flanked on both sides by one copy on each side of a substrate binding domain homologue (family II). The recombinant laminarinase protein was purified from Escherichia coli host cells in two forms, a 73 kDa and a processed 52 kDa protein, both having high specific activity towards laminarin (3100 and 2600 U mg-1, respectively) and K(m) values of 2.8 and 2.2 mg ml-1, respectively. Limited activity on 1,3-1,4-beta-glucan (lichenan) was detected (90 U mg-1). Laminarin was degraded in an endoglucanase modus, yielding glucose, laminaribiose and -triose as end products. Thus LamA classifies as an endo-1,3(4)-beta-glucanase (EC 3.2.1.6). The optimum temperature of the enzymes was 95 degrees C (73 kDa) and 85 degrees C (52 kDa) at an optimum pH of 6.2. The superior thermostability of the 73 kDa enzyme is demonstrated by incubation without substrate at 100 degrees C, where 57% of the initial activity remained after 30 min (82% at 95 degrees C). Thus, LamA is the most thermostable 1,3-beta-glucanase described to date.

Dockerin-like sequences in cellulases and xylanases from the rumen cellulolytic bacterium Ruminococcus flavefaciens

Recent analysis of the endA cellulase gene from Ruminococcus flavefaciens 17 has revealed that it encodes a product of 759 amino acids that provides the first example of a multidomain cellulase from a Ruminococcus sp. Following the family 5 catalytic domain in the predicted EndA enzyme is a 282 amino acid domain of unknown function for which no close relationship was found to other protein sequences. However, the C-terminal sequences of EndA contain a 34 amino acid threonine-rich linker connected to an 81 amino acid region, both of which show strong similarities to sequences present in two xylanases from R. flavefaciens 17. A distant relationship is evident between regions of the 80 amino acid sequences of EndA, XynD and XynB and the duplicated 23 amino acid dockerin sequences found in cellulolytic Clostridium sp., suggesting that as in Clostridium sp. these sequences could mediate the binding of enzymatic polypeptides to another component in the cell surface enzyme complex of R. flavefaciens.

Purification and molecular cloning of an inducible gram-negative bacteria-binding protein from the silkworm, Bombyx mori

A 50-kDa hemolymph protein, having strong affinity to the cell wall of Gram(-) bacteria, was purified from the hemolymph of the silkworm, Bombyx mori. The cDNA encoding this Gram(-) bacteria-binding protein (GNBP) was isolated from an immunized silkworm fat body cDNA library and sequenced. Comparison of the deduced amino acid sequence with known sequences revealed that GNBP contained a region displaying significant homology to the putative catalytic region of a group of bacterial beta-1,3 glucanases and beta-1,3-1,4 glucanases. Silkworm GNBP was also shown to have amino acid sequence similarity to the vertebrate lipopolysaccharide receptor CD14 and was recognized specifically by a polygonal anti-CD14 antibody. Northern blot analysis showed that GNBP was constitutively expressed in fat body, as well as in cuticular epithelial cells of naive silkworms. Intense transcription was, however, rapidly induced following a cuticular or hemoceolien bacterial challenge. An mRNA that hybridized with GNBP cDNA was also found in the l(2)mbn immunocompetent Drosophila cell line. These observations suggest that GNBP is an inducible acute phase protein implicated in the immune response of the silkworm and perhaps other insects.

Crystal structure and site-directed mutagenesis of Bacillus macerans endo-1,3-1,4-beta-glucanase

In beta-glucans those beta-1,4 glycosidic bonds which are adjacent to beta-1,3 bonds are cleaved by endo-1,3-1,4-beta-glucanases (beta-glucanases). Here, the relationship between structure and activity of the beta-glucanase of Bacillus macerans is studied by x-ray crystallography and site-directed mutagenesis of active site residues. Crystal structure analysis at 2.3-A resolution reveals a jelly-roll protein structure with a deep active site channel harboring the amino acid residues Trp101, Glu103, Asp105, and Glu107 as in the hybrid Bacillus beta-glucanase H(A16-M) (Keitel, T., Simon, O., Borriss, R., and Heinemann, U. (1993) Proc. Natl. Acad. Sci. U.S.A. 90, 5287-5291). Different mutant proteins with substitutions in these residues are generated by site-directed mutagenesis, isolated, and characterized. Compared with the wild-type enzyme their activity is reduced to less than 1%. Several mutants with isosteric substitutions in Glu103 and Glu107 are completely inactive, suggesting a direct role of these residues in glycosyl bond hydrolysis. The kinetic properties of mutant beta-glucanases and the crystal structure of the wild-type enzyme are consistent with a mechanism where Glu103 and Glu107 are the catalytic amino acid residues responsible for cleavage of the beta-1,4 glycosidic bond within the substrate molecule.

Cloning and expression of the Clostridium thermocellum celS gene in Escherichia coli

Clostridium thermocellum ATCC 27405 produces an extremely complicated multi-component cellulase aggregate (cellulosome) highly active on crystalline cellulose. From the cellulosome, two subunits, CelS (or Ss; M(r) = 82,000) and CelL (or SL, CipA; M(r) = 250,000), have been identified as essential for crystalline cellulose degradation [Wu et al. (1988) Biochemistry 27:1703]. We have determined the DNA sequence of the celS gene from four cloned DNA fragments encompassing this gene [Wang et al. (1993) J Bacteriol 175:1293]. To express the entire celS gene in Escherichia coli, the celS structural gene was amplified by the polymerase chain reaction (PCR) employing the PCR primers corresponding to sequences flanking the desired gene. This PCR product (2.1 x 10(3) bases; 2.1 kb) was cloned into an E. coli expression vector pRSET B. Subsequent expression of the cloned gene resulted in a fusion protein (rCelS; M(r) = 86,000) as inclusion bodies. The rCelS protein was recognized specifically by an anti-CelS antiserum in a Western blot analysis. The inclusion bodies were purified and solubilized in 5 M urea. The refolded rCelS produced very little reducing sugar from carboxymethylcellulose. However, it showed a higher activity on the crystalline cellulose (Avicel) and an even higher activity on phosphoric-acid-swollen Avicel. These results indicate that the CelS is an exoglucanase.

Native-like in vivo folding of a circularly permuted jellyroll protein shown by crystal structure analysis

A jellyroll beta-sandwich protein, the Bacillus beta-glucanase H(A16-M), is used to probe the role of N-terminal peptide regions in protein folding in vivo. A gene encoding H(A16-M) is rearranged to place residues 1-58 of the protein behind a signal peptide and residues 59-214. The rearranged gene is expressed in Escherichia coli. The resultant circularly permuted protein, cpA16M-59, is secreted into the periplasm, correctly processed, and folded into a stable and active enzyme. Crystal structure analysis at 2.0-A resolution, R = 15.3%, shows cpA16M-59 to have a three-dimensional structure nearly identical with that of the parent beta-glucanase. An analogous experiment based on the wild-type Bacillus macerans beta-glucanase, giving rise to the circularly permuted variant cpMAC-57, yields the same results. Folding of these proteins, therefore, is not a vectorial process depending on the conformation adopted by their native N-terminal oligopeptides after ribosomal synthesis and translocation through the cytoplasmic membrane.

Cloning and sequencing of a Rhodothermus marinus gene, bglA, coding for a thermostable beta-glucanase and its expression in Escherichia coli

A gene library of the thermophilic eubacterium, Rhodothermus marinus, strain 21, was prepared in pUC18 and used to transform Escherichia coli. Of 5400 transformants, two produced halos on lichenan plates after Congo-red staining. Restriction mapping showed that the two clones shared an overlapping 1200-bp DNA fragment, which was used for DNA sequencing. Five potential methionine (Met) translational-initiation codons were identified. A putative signal peptide of 30 amino acids was identified with a hydrophobic core of nine hydrophobic amino acids. The molecular mass of the mature enzyme was estimated to be 29.7 kDa. A comparison of the primary protein sequence of beta-glucanase of Rhodothermus marinus with other glycosyl hydrolases showed 38.5% identity to the C-terminal part of the beta-1,3-glucanase of Bacillus circulans and limited identity to bacterial endo-beta-1,3-1,4-glucanases. The amino acid sequence showed high similarity to regions surrounding the catalytic Glu residue of bacterial beta-glucanases. A gene fragment of 889 bp containing the catalytic domain was overexpressed in E. coli using the pET23, T7-phage RNA polymerase system. The enzyme showed activity on lichenan, beta-glucan and laminarin but not on CMC cellulose or xylan. The expressed enzyme was purified by heat treatment of the host. The enzyme had a temperature and pH optima of 85 degrees C and pH 7.0, respectively, and was shown to retain full activity after incubation for 16 h at 80 degrees C and have a half life of 3 h at 85 degrees C.