Redox properties of the iron-sulfur clusters in activated Fe-hydrogenase from Desulfovibrio vulgaris (Hildenborough)

Kinetic modeling of 2e-/1H+ and 2e-/2H+ bidirectional catalytic cycles

When a redox enzyme or synthetic catalyst is interfaced with an electrode, the electrochemical response depends on the details of the catalytic cycle. Here we focus on the steady-state catalytic waveshape of enzymes such as formate dehydrogenase (2e-/1H+), hydrogenases (2e-/2H+) and other bidirectional molecular catalysts that can be adsorbed on, and undergo direct electron transfer with an electrode. We seek to examine the relations between the dependence on pH of the waveshape, the sequence of events in the catalytic cycle, and the properties of the catalytic intermediates (their reduction potentials and pKa's). Discussing the interpretation of the dependence on pH of the limiting currents and catalytic potentials in various simple situations leads us to introduce the concept of "catalytic pKa". The reasoning is general and could be used in relation to any bidirectional two-electron catalytic cycle. Understanding what defines and tunes the catalytic potentials will be crucial for the design of reversible catalysts, which operate at a fast rate in either direction in response to even a small overpotential.

Binding of exogenous cyanide reveals new active-site states in [FeFe] hydrogenases

[FeFe] hydrogenases are highly efficient metalloenyzmes for hydrogen conversion. Their active site cofactor (the H-cluster) is composed of a canonical [4Fe-4S] cluster ([4Fe-4S]_H) linked to a unique organometallic di-iron subcluster ([2Fe]_H). In [2Fe]_H the two Fe ions are coordinated by a bridging 2-azapropane-1,3-dithiolate (ADT) ligand, three CO and two CN^- ligands, leaving an open coordination site on one Fe where substrates (H₂ and H⁺) as well as inhibitors (e.g. O₂, CO, H₂S) may bind. Here, we investigate two new active site states that accumulate in [FeFe] hydrogenase variants where the cysteine (Cys) in the proton transfer pathway is mutated to alanine (Ala). Our experimental data, including atomic resolution crystal structures and supported by calculations, suggest that in these two states a third CN^- ligand is bound to the apical position of [2Fe]_H. These states can be generated both by "cannibalization" of CN^- from damaged [2Fe]_H subclusters as well as by addition of exogenous CN^-. This is the first detailed spectroscopic and computational characterisation of the interaction of exogenous CN^- with [FeFe] hydrogenases. Similar CN^--bound states can also be generated in wild-type hydrogenases, but do not form as readily as with the Cys to Ala variants. These results highlight how the interaction between the first amino acid in the proton transfer pathway and the active site tunes ligand binding to the open coordination site and affects the electronic structure of the H-cluster.

A personal account on 25 years of scientific literature on [FeFe]-hydrogenase

[FeFe]-hydrogenases are gas-processing metalloenzymes that catalyze H₂ oxidation and proton reduction (H₂ release) in microorganisms. Their high turnover frequencies and lack of electrical overpotential in the hydrogen conversion reaction has inspired generations of biologists, chemists, and physicists to explore the inner workings of [FeFe]-hydrogenase. Here, we revisit 25 years of scientific literature on [FeFe]-hydrogenase and propose a personal account on 'must-read' research papers and review article that will allow interested scientists to follow the recent discussions on catalytic mechanism, O₂ sensitivity, and the in vivo synthesis of the active site cofactor with its biologically uncommon ligands carbon monoxide and cyanide. Focused on-but not restricted to-structural biology and molecular biophysics, we highlight future directions that may inspire young investigators to pursue a career in the exciting and competitive field of [FeFe]-hydrogenase research.

Second and Outer Coordination Sphere Effects in Nitrogenase, Hydrogenase, Formate Dehydrogenase, and CO Dehydrogenase

Gases like H₂, N₂, CO₂, and CO are increasingly recognized as critical feedstock in "green" energy conversion and as sources of nitrogen and carbon for the agricultural and chemical sectors. However, the industrial transformation of N₂, CO₂, and CO and the production of H₂ require significant energy input, which renders processes like steam reforming and the Haber-Bosch reaction economically and environmentally unviable. Nature, on the other hand, performs similar tasks efficiently at ambient temperature and pressure, exploiting gas-processing metalloenzymes (GPMs) that bind low-valent metal cofactors based on iron, nickel, molybdenum, tungsten, and sulfur. Such systems are studied to understand the biocatalytic principles of gas conversion including N₂ fixation by nitrogenase and H₂ production by hydrogenase as well as CO₂ and CO conversion by formate dehydrogenase, carbon monoxide dehydrogenase, and nitrogenase. In this review, we emphasize the importance of the cofactor/protein interface, discussing how second and outer coordination sphere effects determine, modulate, and optimize the catalytic activity of GPMs. These may comprise ionic interactions in the second coordination sphere that shape the electron density distribution across the cofactor, hydrogen bonding changes, and allosteric effects. In the outer coordination sphere, proton transfer and electron transfer are discussed, alongside the role of hydrophobic substrate channels and protein structural changes. Combining the information gained from structural biology, enzyme kinetics, and various spectroscopic techniques, we aim toward a comprehensive understanding of catalysis beyond the first coordination sphere.

Stability of the H-cluster under whole-cell conditions-formation of an Htrans-like state and its reactivity towards oxygen

Hydrogenases are metalloenzymes that catalyze the reversible oxidation of molecular hydrogen into protons and electrons. For this purpose, [FeFe]-hydrogenases utilize a hexanuclear iron cofactor, the H-cluster. This biologically unique cofactor provides the enzyme with outstanding catalytic activities, but it is also highly oxygen sensitive. Under in vitro conditions, oxygen stable forms of the H-cluster denoted H_trans and H_inact can be generated via treatment with sulfide under oxidizing conditions. Herein, we show that an H_trans-like species forms spontaneously under intracellular conditions on a time scale of hours, concurrent with the cells ceasing H₂ production. Addition of cysteine or sulfide during the maturation promotes the formation of this H-cluster state. Moreover, it is found that formation of the observed H_trans-like species is influenced by both steric factors and proton transfer, underscoring the importance of outer coordination sphere effects on H-cluster reactivity.

The oxygen-resistant [FeFe]-hydrogenase CbA5H harbors an unknown radical signal

[FeFe]-hydrogenases catalyze the reversible conversion of molecular hydrogen into protons and electrons with remarkable efficiency. However, their industrial applications are limited by their oxygen sensitivity. Recently, it was shown that the [FeFe]-hydrogenase from Clostridium beijerinckii (CbA5H) is oxygen-resistant and can be reactivated after oxygen exposure. In this work, we used multifrequency continuous wave and pulsed electron paramagnetic resonance (EPR) spectroscopy to characterize the active center of CbA5H, the H-cluster. Under oxidizing conditions, the spectra were dominated by an additional and unprecedented radical species. The generation of this radical signal depends on the presence of an intact H-cluster and a complete proton transfer pathway including the bridging azadithiolate ligand. Selective ⁵⁷Fe enrichment combined with isotope-sensitive electron-nuclear double resonance (ENDOR) spectroscopy revealed a spin density distribution that resembles an H-cluster state. Overall, we uncovered a radical species in CbA5H that is potentially involved in the redox sensing of CbA5H.

Electron paramagnetic resonance spectroscopy revealed an unprecedented radical species in the oxygen-resistant [FeFe]-hydrogenase CbA5H. Analysis of the isotope-sensitive data suggests that it is related to the active site, the H-cluster.

Hydrogenases and H2 metabolism in sulfate-reducing bacteria of the Desulfovibrio genus

Hydrogen metabolism plays a central role in sulfate-reducing bacteria of the Desulfovibrio genus and is based on hydrogenases that catalyze the reversible conversion of protons into dihydrogen. These metabolically versatile microorganisms possess a complex hydrogenase system composed of several enzymes of both [FeFe]- and [NiFe]-type that can vary considerably from one Desulfovibrio species to another. This review covers the molecular and physiological aspects of hydrogenases and H₂ metabolism in Desulfovibrio but focuses particularly on our model bacterium Desulfovibrio fructosovorans. The search of hydrogenase genes in more than 30 sequenced genomes provides an overview of the distribution of these enzymes in Desulfovibrio. Our discussion will consider the significance of the involvement of electron-bifurcation in H₂ metabolism.

Sulfide Protects [FeFe] Hydrogenases From O2

[FeFe] hydrogenases catalyze proton reduction and hydrogen oxidation with high rates and efficiency under physiological conditions, but are highly oxygen sensitive. The [FeFe] hydrogenase from Desulfovibrio desulfuricans ( DdHydAB) can be purified under air in an oxygen stable inactive state H_ox^air. The formation of the H_ox^air state in vitro allows the handling of hydrogenases in air, making their implementation in biotechnological applications more feasible. Here, we report a simple and robust protocol for the formation of the H_ox^air state in DdHydAB and the [FeFe] hydrogenase from Chlamydomonas reinhardtii, which is based on high potential inactivation in the presence of sulfide.

First-principles computation of electron transfer and reaction rate at a perovskite cathode for hydrogen production

The focus of this research is on the electron transfer and its reaction rate at the perovskite cathode of a photoelectrochemical cell for hydrogen production. By employing the density functional theory (DFT), the electron density, projected density of states (PDOS), electron distribution and electron transfer path between [Fe-Fe] hydrogenase and the perovskite cathode can be obtained. Simulation results show that the perovskite cathode is better than traditional cathodes for hydrogen production. Before transmission to the [Fe-Fe] hydrogenase, electron clouds mainly aggregate at the periphery of amine molecules. Simulations also show that the key to hydrogen production at the perovskite structure lies in the organic molecules. Electrons are transferred to the hydrocarbon structural chain before reaching the Fe atoms. The Rice, Ramsperger, Kassel and Marcus (RRKM) theory was used to predict the reaction rates at different temperatures. It was found that the reaction rates are in good agreement with the experimental results. This research provides more physical insight into the electron transfer mechanism during the hydrogen production process.

Mitochondrial Bol1 and Bol3 function as assembly factors for specific iron-sulfur proteins

Assembly of mitochondrial iron-sulfur (Fe/S) proteins is a key process of cells, and defects cause many rare diseases. In the first phase of this pathway, ten Fe/S cluster (ISC) assembly components synthesize and insert [2Fe-2S] clusters. The second phase is dedicated to the assembly of [4Fe-4S] proteins, yet this part is poorly understood. Here, we characterize the BOLA family proteins Bol1 and Bol3 as specific mitochondrial ISC assembly factors that facilitate [4Fe-4S] cluster insertion into a subset of mitochondrial proteins such as lipoate synthase and succinate dehydrogenase. Bol1-Bol3 perform largely overlapping functions, yet cannot replace the ISC protein Nfu1 that also participates in this phase of Fe/S protein biogenesis. Bol1 and Bol3 form dimeric complexes with both monothiol glutaredoxin Grx5 and Nfu1. Complex formation differentially influences the stability of the Grx5-Bol-shared Fe/S clusters. Our findings provide the biochemical basis for explaining the pathological phenotypes of patients with mutations in BOLA3.

DOI:http://dx.doi.org/10.7554/eLife.16673.001

Proteins perform almost all the tasks necessary for cells to survive. However, some proteins, especially enzymes involved in metabolism and energy production, need to contain extra molecules called co-factors to work properly. In human, yeast and other eukaryotic cells, co-factors called iron-sulfur clusters are made in compartments called mitochondria before being packaged into target proteins.

Defects that affect the assembly of proteins with iron-sulfur clusters are associated with severe diseases that affect metabolism, the nervous system and the blood. Mitochondria contain at least 17 proteins involved in making iron-sulfur proteins, but there may be others that have not yet been identified. For example, a study on patients with a rare human genetic disease suggested that a protein called BOLA3 might also play a role in this process.

BOLA3 is closely related to the BOLA1 proteins. Here, Uzarska, Nasta, Weiler et al. used yeast to test how these proteins contribute to the assembly of iron-sulfur proteins. Biochemical techniques showed that the yeast equivalents of BOLA1 and BOLA3 (known as Bol1 and Bol3) play specific roles in the assembly pathway. When both of these proteins were missing from yeast, some iron-sulfur proteins – including an important enzyme called lipoic acid synthase – did not assemble properly. The experiments suggest that yeast Bol1 and Bol3 play overlapping and critical roles during the last step of iron-sulfur protein assembly when the iron-sulfur cluster is inserted into the target protein.

Lastly, Uzarska, Nasta, Weiler et al. used biophysical techniques to show how Bol1 and Bol3 interact with another mitochondrial protein that performs a more general role in iron-sulfur protein assembly. Defects in assembling iron-sulfur proteins are generally more harmful to human cells than yeast cells. Therefore, the next step is to investigate what exact roles BOLA1 and BOLA3 play in human cells and how similar this pathway is in different eukaryotes.

DOI:http://dx.doi.org/10.7554/eLife.16673.002

Density Functional Theory Calculation of Bonding and Charge Parameters for Molecular Dynamics Studies on [FeFe] Hydrogenases

We have developed and tested molecular mechanics parameters for [FeS] clusters found in known [FeFe] hydrogenases. Bond stretching, angle bending, dihedral and improper torsion parameters for models of the oxidized and reduced catalytic H-cluster, [4Fe4S](+,2+)Cys4, [4Fe4S](+,2+)Cys3His, and [2Fe2S](+,2+)Cys4, were calculated solely from Kohn-Sham density functional theory and Natural Population Analysis. Circumsphere analysis of the cubane clusters in the energy-minimized structure of the full Clostridium pasteurianum hydrogenase I showed the resulting metallocluster structures to be similar to known cubane structures. All clusters were additionally stable in molecular dynamics simulations over the course of 1.0 ns in the fully oxidized and fully reduced enzyme models. Normal modes calculated by quasiharmonic analysis from the dynamics data show unexpected couplings among internal coordinate motions, which may reflect the effects of the protein structure on metallocluster dynamics.

Artificially maturated [FeFe] hydrogenase from Chlamydomonas reinhardtii: a HYSCORE and ENDOR study of a non-natural H-cluster

Hydrogenases are enzymes that catalyze the oxidation of H2 as well as the reduction of protons to form H2. The active site of [FeFe] hydrogenase is referred to as the "H-cluster" and consists of a "classical" [4Fe-4S] cluster connected via a bridging cysteine thiol group to a unique [2Fe]H sub-cluster, containing CN(-) and CO ligands as well as a bidentate azadithiolate ligand. It has been recently shown that the biomimetic [Fe2(adt)(CO)4(CN)2](2-) (adt(2-) = azadithiolate) complex resembling the diiron sub-cluster can be inserted in vitro into the apo-protein of [FeFe] hydrogenase, which contains only the [4Fe-4S] part of the H-cluster, resulting in a fully active enzyme. This synthetic tool allows convenient incorporation of a variety of diiron mimics, thus generating hydrogenases with artificial active sites. [FeFe] hydrogenase from Chlamydomonas reinhardtii maturated with the biomimetic complex [Fe2(pdt)(CO)4(CN)2](2-) (pdt(2-) = propanedithiolate), in which the bridging adt(2-) ligand is replaced by pdt(2-), can be stabilized in a state strongly resembling the active oxidized (Hox) state of the native protein. This state is EPR active and the signal originates from the mixed valence Fe(I)Fe(II) state of the diiron sub-cluster. Taking advantage of the variant with (15)N and (13)C isotope labeled CN(-) ligands we performed HYSCORE and ENDOR studies on this hybrid protein. The (13)C hyperfine couplings originating from both CN(-) ligands were determined and assigned. Only the (15)N coupling from the CN(-) ligand bound to the terminal iron was observed. Detailed orientation selective ENDOR and HYSCORE experiments at multiple field positions enabled the extraction of accurate data for the relative orientations of the nitrogen and carbon hyperfine tensors. These data are consistent with the crystal structure assuming a g-tensor orientation following the local symmetry of the binuclear sub-cluster.

EPR monitored redox titration of the cofactors of Saccharomyces cerevisiae Nar1

Electron Paramagnetic Resonance (EPR) monitored redox titrations are a powerful method to determine the midpoint potential of cofactors in proteins and to identify and quantify the cofactors in their detectable redox state. The technique is complementary to direct electrochemistry (voltammetry) approaches, as it does not offer information on electron transfer rates, but does establish the identity and redox state of the cofactors in the protein under study. The technique is widely applicable to any protein containing an electron paramagnetic resonance (EPR) detectable cofactor. A typical titration requires 2 ml protein with a cofactor concentration in the range of 1-100 µM. The protein is titrated with a chemical reductant (sodium dithionite) or oxidant (potassium ferricyanide) in order to poise the sample at a certain potential. A platinum wire and a Ag/AgCl reference electrode are connected to a voltmeter to measure the potential of the protein solution A set of 13 different redox mediators is used to equilibrate between the redox cofactors of the protein and the electrodes. Samples are drawn at different potentials and the Electron Paramagnetic Resonance spectra, characteristic for the different redox cofactors in the protein, are measured. The plot of the signal intensity versus the sample potential is analyzed using the Nernst equation in order to determine the midpoint potential of the cofactor.

[FeFe]- and [NiFe]-hydrogenase diversity, mechanism, and maturation

The [FeFe]- and [NiFe]-hydrogenases catalyze the formal interconversion between hydrogen and protons and electrons, possess characteristic non-protein ligands at their catalytic sites and thus share common mechanistic features. Despite the similarities between these two types of hydrogenases, they clearly have distinct evolutionary origins and likely emerged from different selective pressures. [FeFe]-hydrogenases are widely distributed in fermentative anaerobic microorganisms and likely evolved under selective pressure to couple hydrogen production to the recycling of electron carriers that accumulate during anaerobic metabolism. In contrast, many [NiFe]-hydrogenases catalyze hydrogen oxidation as part of energy metabolism and were likely key enzymes in early life and arguably represent the predecessors of modern respiratory metabolism. Although the reversible combination of protons and electrons to generate hydrogen gas is the simplest of chemical reactions, the [FeFe]- and [NiFe]-hydrogenases have distinct mechanisms and differ in the fundamental chemistry associated with proton transfer and control of electron flow that also help to define catalytic bias. A unifying feature of these enzymes is that hydrogen activation itself has been restricted to one solution involving diatomic ligands (carbon monoxide and cyanide) bound to an Fe ion. On the other hand, and quite remarkably, the biosynthetic mechanisms to produce these ligands are exclusive to each type of enzyme. Furthermore, these mechanisms represent two independent solutions to the formation of complex bioinorganic active sites for catalyzing the simplest of chemical reactions, reversible hydrogen oxidation. As such, the [FeFe]- and [NiFe]-hydrogenases are arguably the most profound case of convergent evolution. This article is part of a Special Issue entitled: Fe/S proteins: Analysis, structure, function, biogenesis and diseases.

Investigations on the role of proton-coupled electron transfer in hydrogen activation by [FeFe]-hydrogenase

Proton-coupled electron transfer (PCET) is a fundamental process at the core of oxidation-reduction reactions for energy conversion. The [FeFe]-hydrogenases catalyze the reversible activation of molecular H2 through a unique metallocofactor, the H-cluster, which is finely tuned by the surrounding protein environment to undergo fast PCET transitions. The correlation of electronic and structural transitions at the H-cluster with proton-transfer (PT) steps has not been well-resolved experimentally. Here, we explore how modification of the conserved PT network via a Cys → Ser substitution at position 169 proximal to the H-cluster of Chlamydomonas reinhardtii [FeFe]-hydrogenase (CrHydA1) affects the H-cluster using electron paramagnetic resonance (EPR) and Fourier transform infrared (FTIR) spectroscopy. Despite a substantial decrease in catalytic activity, the EPR and FTIR spectra reveal different H-cluster catalytic states under reducing and oxidizing conditions. Under H2 or sodium dithionite reductive treatments, the EPR spectra show signals that are consistent with a reduced [4Fe-4S]H(+) subcluster. The FTIR spectra showed upshifts of νCO modes to energies that are consistent with an increase in oxidation state of the [2Fe]H subcluster, which was corroborated by DFT analysis. In contrast to the case for wild-type CrHydA1, spectra associated with Hred and Hsred states are less populated in the Cys → Ser variant, demonstrating that the exchange of -SH with -OH alters how the H-cluster equilibrates among different reduced states of the catalytic cycle under steady-state conditions.

Chlorite dismutases - a heme enzyme family for use in bioremediation and generation of molecular oxygen

Chlorite is a serious environmental concern, as rising concentrations of this harmful anthropogenic compound have been detected in groundwater, drinking water, and soil. Chlorite dismutases (Clds) are therefore important molecules in bioremediation as Clds catalyze the degradation of chlorite to chloride and molecular oxygen. Clds are heme b-containing oxidoreductases present in numerous bacterial and archaeal phyla. This review presents the phylogeny of functional Clds and Cld-like proteins, and demonstrates the close relationship of this novel enzyme family to the recently discovered dye-decolorizing peroxidases. The available X-ray structures, biophysical and enzymatic properties, as well as a proposed reaction mechanism, are presented and critically discussed. Open questions about structure-function relationships are addressed, including the nature of the catalytically relevant redox and reaction intermediates and the mechanism of inactivation of Clds during turnover. Based on analysis of currently available data, chlorite dismutase from "Candidatus Nitrospira defluvii" is suggested as a model Cld for future application in biotechnology and bioremediation. Additionally, Clds can be used in various applications as local generators of molecular oxygen, a reactivity already exploited by microbes that must perform aerobic metabolic pathways in the absence of molecular oxygen. For biotechnologists in the field of chemical engineering and bioremediation, this review provides the biochemical and biophysical background of the Cld enzyme family as well as critically assesses Cld's technological potential.

Molecular basis of [FeFe]-hydrogenase function: an insight into the complex interplay between protein and catalytic cofactor

The precise electrochemical features of metal cofactors that convey the functions of redox enzymes are essentially determined by the specific interaction pattern between cofactor and enclosing protein environment. However, while biophysical techniques allow a detailed understanding of the features characterizing the cofactor itself, knowledge about the contribution of the protein part is much harder to obtain. [FeFe]-hydrogenases are an interesting class of enzymes that catalyze both, H2 oxidation and the reduction of protons to molecular hydrogen with significant efficiency. The active site of these proteins consists of an unusual prosthetic group (H-cluster) with six iron and six sulfur atoms. While H-cluster architecture and catalytic states during the different steps of H2 turnover have been thoroughly investigated during the last 20 years, possible functional contributions from the polypeptide framework were only assumed according to the level of conservancy and X-ray structure analyses. Due to the recent development of simpler and more efficient expression systems the role of single amino acids can now be experimentally investigated. This article summarizes, compares and categorizes the results of recent investigations based on site directed and random mutagenesis according to their informative value about structure function relationships in [FeFe]-hydrogenases. This article is part of a Special Issue entitled: Metals in Bioenergetics and Biomimetics Systems.

Mixed-valence [Fe(I)Fe(II)] hydrogenase active site model complexes stabilized by a bidentate carborane bis-phosphine ligand

A series of [FeFe]-hydrogenase active site analogues, with the general formula [Fe(2)(dt)(CO)(4)(BC)] 1-3 (dt = dithiolate, pdt = propyl-1,3-dt (1), bdt = benzene-1,2-dt (2), edt = ethyl-1,2-dt (3); BC = 1,2-bisdiphenylphosphine-1,2-o-carborane), has been prepared and structurally characterized. While the electrochemical reductions of 1-3 are largely invariant to the different nature of their dt bridges, the oxidations differ by more than 120 mV in between the series. Remarkably, all three compounds are reversibly oxidized, with complex 1 that contains the most electron-donating pdt ligand at the mildest potential of -0.09 V vs. Fc/Fc(+). The one-electron oxidized state 1(ox) is stable for several minutes and was spectroscopically characterized by FTIR and EPR. EPR spectroscopy provided evidence that in the mixed-valence [Fe(I)Fe(II)] state most of the spin density is located on the iron with the BC-ligand. This is monitored through the strong (31)P hyperfine coupling of the phenyl groups of the BC ligand, while further delocalization into the o-carborane unit is negligible.

Cysteine biosynthesis, in concert with a novel mechanism, contributes to sulfide detoxification in mitochondria of Arabidopsis thaliana

In higher plants, biosynthesis of cysteine is catalysed by OAS-TL [O-acetylserine(thiol)lyase], which replaces the activated acetyl group of O-acetylserine with sulfide. The enzyme is present in cytosol, plastids and mitochondria of plant cells. The sole knockout of mitochondrial OAS-TL activity (oastlC) leads to significant reduction of growth in Arabidopsis thaliana. The reason for this phenotype is still enigmatic, since mitochondrial OAS-TL accounts only for approximately 5% of total OAS-TL activity. In the present study we demonstrate that sulfide specifically intoxicates Complex IV activity, but not electron transport through Complexes II and III in isolated mitochondria of oastlC plants. Loss of mitochondrial OAS-TL activity resulted in significant inhibition of dark respiration under certain developmental conditions. The abundance of mitochondrially encoded proteins and Fe–S cluster-containing proteins was not affected in oastlC. Furthermore, oastlC seedlings were insensitive to cyanide, which is detoxified by β-cyano-alanine synthase in mitochondria at the expense of cysteine. These results indicate that in situ biosynthesis of cysteine in mitochondria is not mandatory for translation, Fe–S cluster assembly and cyanide detoxification. Finally, we uncover an OAS-TL-independent detoxification system for sulfide in mitochondria of Arabidopsis that allows oastlC plants to cope with high sulfide levels caused by abiotic stresses.

Insights into [FeFe]-hydrogenase structure, mechanism, and maturation

Hydrogenases are metalloenzymes that are key to energy metabolism in a variety of microbial communities. Divided into three classes based on their metal content, the [Fe]-, [FeFe]-, and [NiFe]-hydrogenases are evolutionarily unrelated but share similar nonprotein ligand assemblies at their active site metal centers that are not observed elsewhere in biology. These nonprotein ligands are critical in tuning enzyme reactivity, and their synthesis and incorporation into the active site clusters require a number of specific maturation enzymes. The wealth of structural information on different classes and different states of hydrogenase enzymes, biosynthetic intermediates, and maturation enzymes has contributed significantly to understanding the biochemistry of hydrogen metabolism. This review highlights the unique structural features of hydrogenases and emphasizes the recent biochemical and structural work that has created a clearer picture of the [FeFe]-hydrogenase maturation pathway.

Production of a biomimetic Fe(I)-S phase on pyrite by atomic hydrogen beam surface reactive scattering

Molecular beam surface scattering and X-ray absorption spectroscopic experiments were employed to study the reaction of deuterium atoms with a pyrite, FeS(2) (100), surface and to investigate the electronic and geometric structures of the resulting Fe-S phases. Incident D atoms, produced by a radiofrequency plasma and expanded in an effusive beam, were directed at a pyrite surface held at various temperatures from ambient up to 200 °C. During exposure to the D-atom beam, D(2)S products were released with a thermal distribution of molecular speeds, indicating that the D atoms likely reacted in thermal equilibrium with the surface. The yield of D(2)S from the surface decreased approximately exponentially with exposure duration, suggesting that the surface accessible sulfur atoms were depleted, thus leaving an iron-rich surface. This conclusion is consistent with X-ray absorption measurements of the exposed surfaces, which indicated the formation of a layered structure, with elemental iron as the outermost layer on top of a formally Fe((I))-S phase as an intermediate layer and a formally Fe((II))-S(2) bulk pyrite layer at lower depths. The reduced Fe((I))-S phase is particularly remarkable because of its similarity to the catalytically active sites of small molecule metalloenzymes, such as FeFe-hydrogenases and MoFe-nitrogenases.

Targeting intermediates of [FeFe]-hydrogenase by CO and CN vibrational signatures

In this work, we employ density functional theory to assign vibrational signatures of [FeFe]-hydrogenase intermediates to molecular structures. For this purpose, we perform an exhaustive analysis of structures and harmonic vibrations of a series of CN and CO containing model clusters of the [FeFe]-hydrogenase enzyme active site considering also different charges, counterions, and solvents. The pure density functional BP86 in combination with a triple-ζ polarized basis set produce reliable molecular structures as well as harmonic vibrations. Calculated CN and CO stretching vibrations are analyzed separately. Scaled vibrational frequencies are then applied to assign intermediates in [FeFe]-hydrogenase's reaction cycle. The results nicely complement the previous studies of Darensbourg and Hall, and Zilberman et al. The infrared spectrum of the H(ox) form is in very good agreement with the calculated spectrum of the Fe(I)Fe(II) model complex featuring a free coordination site at the distal Fe atom, as well as, with the calculated spectra of the complexes in which H(2) or H(2)O are coordinated at this site. The spectrum of H(red) measured from Desulfovibrio desulfuricans is compatible with a mixture of a Fe(I)Fe(I) species with all terminal COs, and a Fe(I)Fe(I) species with protonated dtma ligand, while the spectrum of H(red) recently measured from Chlamydomonas reinhardtii is compatible with a mixture of a Fe(I)Fe(I) species with a bridged CO, and a Fe(II)Fe(II) species with a terminal hydride bound to the Fe atom.

[Fe-Fe]-hydrogenase Reactivated by Residue Mutations as Bridging Carbonyl Rearranges: A QM/MM Study

In the current work, we found aqueous enzyme phase reaction pathways for the reactivation of the exogenously inhibited [Fe-Fe]-hydrogenases by O2, or OH-, which metabolizes to H2O1,2. We used the hybrid quantum mechanics/molecular mechanics (QM/MM) method to study the reactivation pathways of the exogenously inhibited enzyme matrix. The ONIOM calculations performed on the enzyme agree with experimental results3, i.e., wild-type [Fe-Fe]-hydrogenase H-cluster is inhibited by oxygen metabolites. An enzyme spherical region with a radius of 8 Å (from the distal iron, Fed) has been screened for residues that prevent H2O from leaving the catalytic site and reactivate the [Fe-Fe]-hydrogenase H-cluster. In the screening process, polar residues were removed, one at a time, and frequency calculations provided the change in the Gibbs' energy for the dissociation of water (due to their deletion). When residue deletion resulted in significant Gibbs' energy decrease, further residue substitutions have been carried out. Following each substitution, geometry optimization and frequency calculations have been performed to assess the change in the Gibbs' energy for the elimination H2O. Favorable thermodynamic results have been obtained for both single residue removal (ΔGΔGlu374 = -1.6 kcal/mol), single substitution (ΔGGlu374His = -3.1 kcal/mol), and combined residue substitutions (ΔGArg111Glu;Thr145Val;Glu374His;Tyr375Phe = -7.5 kcal/mol). Because the wild-type enzyme has only an endergonic step to overcome, i.e., for H2O removal, by eliminating several residues, one at a time, the endergonic step was made to proceed spontaneously. Thus, the most promising residue deletions which enhance H2O elimination are ΔArg111, ΔThr145, ΔSer177, ΔGlu240, ΔGlu374, and ΔTyr375. The thermodynamics and electronic structure analyses show that the bridging carbonyl (COb) of the H-cluster plays a concomitant role in the enzyme inhibition/reactivation. In gas phase, COb shifts towards Fed to compensate for the electron density donated to oxygen upon the elimination of H2O. However, this is not possible in the wild-type enzyme because the protein matrix hinders the displacement of COb towards Fed, which leads to enzyme inhibition. However, enzyme reactivation can be achieved by means of appropriate amino acid substitutions.

Homologous expression of the nrdF gene of Corynebacterium ammoniagenes strain ATCC 6872 generates a manganese-metallocofactor (R2F) and a stable tyrosyl radical (Y˙) involved in ribonucleotide reduction

Ribonucleotide reduction, the unique step in the pathway to DNA synthesis, is catalyzed by enzymes via radical-dependent redox chemistry involving an array of diverse metallocofactors. The nucleotide reduction gene (nrdF) encoding the metallocofactor containing small subunit (R2F) of the Corynebacterium ammoniagenes ribonucleotide reductase was reintroduced into strain C. ammoniagenes ATCC 6872. Efficient homologous expression from plasmid pOCA2 using the tac-promotor enabled purification of R2F to homogeneity. The chromatographic protocol provided native R2F with a high ratio of manganese to iron (30:1), high activity (69 μmol 2'-deoxyribonucleotide·mg⁻¹ ·min⁻¹) and distinct absorption at 408 nm, characteristic of a tyrosyl radical (Y˙), which is sensitive to the radical scavenger hydroxyurea. A novel enzyme assay revealed the direct involvement of Y˙ in ribonucleotide reduction because 0.2 nmol 2'-deoxyribonucleotide was formed, driven by 0.4 nmol Y˙ located on R2F. X-band electron paramagnetic resonance spectroscopy demonstrated a tyrosyl radical at an effective g-value of 2.004. Temperature dependent X/Q-band EPR studies revealed that this radical is coupled to a metallocofactor. Similarities of the native C. ammoniagenes ribonucleotide reductase to the in vitro activated Escherichia coli class Ib enzyme containing a dimanganese(III)-tyrosyl metallocofactor are discussed.

H2 conversion in the presence of O2 as performed by the membrane-bound [NiFe]-hydrogenase of Ralstonia eutropha

[NiFe]-hydrogenases catalyze the oxidation of H(2) to protons and electrons. This reversible reaction is based on a complex interplay of metal cofactors including the Ni-Fe active site and several [Fe-S] clusters. H(2) catalysis of most [NiFe]-hydrogenases is sensitive to dioxygen. However, some bacteria contain hydrogenases that activate H(2) even in the presence of O(2). There is now compelling evidence that O(2) affects hydrogenase on three levels: 1) H(2) catalysis, 2) hydrogenase maturation, and 3) H(2)-mediated signal transduction. Herein, we summarize the genetic, biochemical, electrochemical, and spectroscopic properties related to the O(2) tolerance of hydrogenases resident in the facultative chemolithoautotroph Ralstonia eutropha H16. A focus is given to the membrane-bound [NiFe]-hydogenase, which currently represents the best-characterized member of O(2)-tolerant hydrogenases.

Residue Mutations in [Fe-Fe]-hydrogenase Impedes O(2) Binding: A QM/MM Investigation

[Fe-Fe]-hydrogenases are enzymes that reversibly catalyze the reaction of protons and electrons to molecular hydrogen, which occurs in anaerobic media. In living systems, [Fe-Fe]-hydrogenases are mostly used for H(2) production. The [Fe-Fe]-hydrogenase H-cluster is the active site, which contains two iron atoms. The latest theoretical investigations1,2 advocate that the structure of di-iron air inhibited species are either Fe(p) (II)-Fe(d) (II)-O-H(-), or Fe(p) (II)-Fe(d) (II)-O-O-H, thus O(2) has to be prevented from binding to Fe(d) in all di-iron subcluster oxidation states in order to retain a catalytically active enzyme. By performing residue mutations on [Fe-Fe]-hydrogenases, we were able to weaken O(2) binding to distal iron (Fe(d)) of Desulfovibrio desulfuricans hydrogenase (DdH). Individual residue deletions were carried out in the 8 A apoenzyme layer radial outward from Fe(d) to determine what residue substitutions should be made to weaken O(2) binding. Residue deletions and substitutions were performed for three di-iron subcluster oxidation states, Fe(p) (II)-Fe(d) (II), Fe(p) (II)-Fe(d) (I), and Fe(p) (I)-Fe(d) (I) of [Fe-Fe]-hydrogenase. Two deletions (DeltaThr(152) and DeltaSer(202)) were found most effective in weakening O(2) binding to Fe(d) in Fe(p) (II)-Fe(d) (I) hydrogenase (DeltaG(QM/MM) = +5.4 kcal/mol). An increase in Gibbs' energy (+2.2 kcal/mol and +4.4 kcal/mol) has also been found for Fe(p) (II)-Fe(d) (II), and Fe(p) (I)-Fe(d) (I) hydrogenase respectively. pi-backdonation considerations for frontier molecular orbital and geometrical analysis corroborate the Gibbs's energy results.

Inactivation of [Fe-Fe]-Hydrogenase by O(2). Thermodynamics and Frontier Molecular Orbitals Analyses

The oxidation of H-cluster in gas phase, and in aqueous enzyme phase, has been investigated by means of quantum mechanics (QM) and combined quantum mechanics-molecular mechanics (QM/MM). Several potential reaction pathways (in the above mentioned chemical environments) have been studied, wherein only the aqueous enzyme phase has been found to lead to an inhibited hydroxylated cluster. Specifically, the inhibitory process occurs at the distal iron (Fe(d)) of the catalytic H-cluster (which is also the atom involved in H(2) synthesis). The processes involved in the H-cluster oxidative pathways are O(2) binding, e(-) transfer, protonation, and H(2)O removal.We found that oxygen binding is non-spontaneous in gas phase, and spontaneous for aqueous enzyme phase where both Fe atoms have oxidation state II; however, it is spontaneous for the partially oxidized and reduced clusters in both phases. Hence, in the protein environment the hydroxylated H-cluster is obtained by means of completely exergonic reaction pathway starting with proton transfer.A unifying endeavor has been carried out for the purpose of understanding the thermodynamic results vis-à-vis several other performed electronic structural methods, such as frontier molecular orbitals (FMO), natural bond orbital partial charges (NBO), and H-cluster geometrical analysis. An interesting result of the FMO examination (for gas phase) is that an e(-) is transferred to LUMO(alpha) rather than to SOMO(beta), which is unexpected because SOMO(beta) usually resides in a lower energy rather than LUMO(alpha) for open-shell clusters.

Carbon Monoxide and Cyanide Ligands in the Active Site of [FeFe]-Hydrogenases

The [FeFe]-hydrogenases, although share common features when compared to other metal containing hydrogenases, clearly have independent evolutionary origins. Examples of [FeFe]-hydrogenases have been characterized in detail by biochemical and spectroscopic approaches and the high resolution structures of two examples have been determined. The active site H-cluster is a complex bridged metal assembly in which a [4Fe-4S] cubane is bridged to a 2Fe subcluster with unique non-protein ligands including carbon monoxide, cyanide, and a five carbon dithiolate. Carbon monoxide and cyanide ligands as a component of a native active metal center is a property unique to the metal containing hydrogenases and there has been considerable attention to the characterization of the H-cluster at the level of electronic structure and mechanism as well as to defining the biological means to synthesize such a unique metal cluster. The chapter describes the structural architecture of [FeFe]-hydrogenases and key spectroscopic observations that have afforded the field with a fundamental basis for understanding the relationship between structure and reactivity of the H-cluster. In addition, the results and ideas concerning the topic of H-cluster biosynthesis as an emerging and fascinating area of research, effectively reinforcing the potential linkage between iron-sulfur biochemistry to the role of iron-sulfur minerals in prebiotic chemistry and the origin of life.

The Electronic Structure of the H-Cluster in the [FeFe]-Hydrogenase from Desulfovibrio desulfuricans: A Q-band 57Fe-ENDOR and HYSCORE Study

The active site of the (57)Fe-enriched [FeFe]-hydrogenase (i.e., the "H-cluster") from Desulfovibrio desulfuricans has been examined using advanced pulse EPR methods at X- and Q-band frequencies. For both the active oxidized state (H(ox)) and the CO inhibited form (H(ox)-CO) all six (57)Fe hyperfine couplings were detected. The analysis shows that the apparent spin density extends over the whole H-cluster. The investigations revealed different hyperfine couplings of all six (57)Fe nuclei in the H-cluster of the H(ox)-CO state. Four large 57Fe hyperfine couplings in the range 20-40 MHz were found (using pulse ENDOR and TRIPLE methods) and were assigned to the [4Fe-4S](H) (cubane) subcluster. Two weak (57)Fe hyperfine couplings below 5 MHz were identified using Q-band HYSCORE spectroscopy and were assigned to the [2Fe](H) subcluster. For the H(ox) state only two different 57Fe hyperfine couplings in the range 10-13 MHz were detected using pulse ENDOR. An (57)Fe line broadening analysis of the X-band CW EPR spectrum indicated, however, that all six (57)Fe nuclei in the H-cluster are contributing to the hyperfine pattern. It is concluded that in both states the binuclear subcluster [2Fe](H) assumes a [Fe(I)Fe(II)] redox configuration where the paramagnetic Fe(I) atom is attached to the [4Fe-4S](H) subcluster. The (57)Fe hyperfine interactions of the formally diamagnetic [4Fe-4S](H) are due to an exchange interaction between the two subclusters as has been discussed earlier by Popescu and Münck [Popescu, C.V.; Münck, E., J. Am. Chem. Soc. 1999, 121, 7877-7884]. This exchange coupling is strongly enhanced by binding of the extrinsic CO ligand. Binding of the dihydrogen substrate may induce a similar effect, and it is therefore proposed that the observed modulation of the electronic structure by the changing ligand surrounding plays an important role in the catalytic mechanism of [FeFe]-hydrogenase.