Surface modification of silicone intraocular lens by 2-methacryloyloxyethyl phosphoryl-choline binding to reduce Staphylococcus epidermidis adherence

Comparative Evaluation of Pseudomonas aeruginosa Adhesion to a Poly-(2-Methacryloyloxyethyl Phosphorylcholine)-Modified Silicone Hydrogel Contact Lens

Pseudomonas aeruginosa is the most common causative agent associated with microbial keratitis. During contact lens wear, pathogens may be introduced into the ocular environment, which might cause adverse events. Lehfilcon A is a recently developed contact lens with a water gradient surface composed of polymeric 2-methacryloyloxyethyl phosphorylcholine (MPC). MPC is re-ported to impart anti-biofouling properties onto modified substrates. Therefore, in this in vitro experimental study, we tested the capability of lehfilcon A to resist adhesion by P. aeruginosa. Quantitative bacterial adhesion assays using five strains of P. aeruginosa were conducted to compare the adherence properties of lehfilcon A to five currently marketed silicone hydrogel (SiHy) contact lenses (comfilcon A, fanfilcon A, senofilcon A, senofilcon C, and samfilcon A). Compared to lehfilcon A, we observed 26.7 ± 8.8 times (p = 0.0028) more P. aeruginosa binding to comfilcon A, 30.0 ± 10.8 times (p = 0.0038) more binding to fanfilcon A, 18.2 ± 6.2 times (p = 0.0034) more binding to senofilcon A, 13.6 ± 3.9 times (p = 0.0019) more binding to senofilcon C, and 29.5 ± 11.8 times (p = 0.0057) more binding to samfilcon A. These results demonstrate that, for various strains of P. aeruginosa, lehfilcon A reduces bacterial adhesion compared to other contact lens materials.

Evaluation of Serratia marcescens Adherence to Contact Lens Materials

Bacterial keratitis is a risk associated with the use of contact lenses for cosmetic purposes or vision correction. In this in vitro experimental study, we examined the ability of the ocular pathogen Serratia marcescens to adhere to monthly or biweekly replacement contact lenses. We performed quantitative adhesion assays to evaluate the adherence of S. marcescens to seven contact lens materials: comfilcon A, senofilcon A, omafilcon B, fanfilcon A, balafilcon A, senofilcon C, and lehfilcon A. Lehfilcon A is a newly marketed silicon hydrogel contact lens with a surface modification of poly-(2-methacryloyloxyethyl phosphorylcholine) (PMPC). PMPC has previously been demonstrated to be an effective anti-biofouling treatment for numerous surfaces. We observed low S. marcescens adherence to lehfilcon A compared to other materials. We demonstrate the use of the fluorescent dye 5(6)-Carboxytetramethylrhodamine succinimidyl ester to covalently stain live cells prior to material adhesion studies.

Resveratrol-Loaded Hydrogel Contact Lenses with Antioxidant and Antibiofilm Performance

Contact lenses (CLs) are prone to biofilm formation, which may cause severe ocular infections. Since the use of antibiotics is associated with resistance concerns, here, two alternative strategies were evaluated to endow CLs with antibiofilm features: copolymerization with the antifouling monomer 2-methacryloyloxyethyl phosphorylcholine (MPC) and loading of the antioxidant resveratrol with known antibacterial activity. MPC has, so far, been used to increase water retention on the CL surface (Proclear^® 1 day CLs). Both poly(hydroxyethyl methacrylate) (HEMA) and silicone hydrogels were prepared with MPC covering a wide range of concentrations (from 0 to 101 mM). All hydrogels showed physical properties adequate for CLs and successfully passed the hen’s egg-chorioallantoic membrane (HET-CAM) test. Silicone hydrogels had stronger affinity for resveratrol, with higher loading and a slower release rate. Ex vivo cornea and sclera permeability tests revealed that resveratrol released from the hydrogels readily accumulated in both tissues but did not cross through. The antibiofilm tests against Pseudomonas aeruginosa and Staphylococcus aureus evidenced that, in general, resveratrol decreased biofilm formation, which correlated with its concentration-dependent antibacterial capability. Preferential adsorption of lysozyme, compared to albumin, might also contribute to the antimicrobial activity. In addition, importantly, the loading of resveratrol in the hydrogels preserved the antioxidant activity, even against photodegradation. Overall, the designed hydrogels can host therapeutically relevant amounts of resveratrol to be sustainedly released on the eye, providing antibiofilm and antioxidant performance.

Antifouling Silicone Hydrogel Contact Lenses with a Bioinspired 2-Methacryloyloxyethyl Phosphorylcholine Polymer Surface

Inspired by the cell membrane surface as well as the ocular tissue, a novel and clinically applicable antifouling silicone hydrogel contact lens material was developed. The unique chemical and biological features on the surface on a silicone hydrogel base substrate were achieved by a cross-linked polymer layer composed of 2-methacryloyloxyethyl phosphorylcholine (MPC), which was considered important for optimal on-eye performance. The effects of the polymer layer on adsorption of biomolecules, such as lipid and proteins, and adhesion of cells and bacteria were evaluated and compared with several conventional silicone hydrogel contact lens materials. The MPC polymer layer provided significant resistance to lipid deposition as visually demonstrated by the three-dimensional confocal images of whole contact lenses. Also, fibroblast cell adhesion was decreased to a 1% level compared with that on the conventional silicone hydrogel contact lenses. The movement of the cells on the surface of the MPC polymer-modified lens material was greater compared with other silicone hydrogel contact lenses indicating that lubrication of the contact lenses on ocular tissue might be improved. The superior hydrophilic nature of the MPC polymer layer provides improved surface properties compared to the underlying silicone hydrogel base substrate.

Recent progress and strategies to develop antimicrobial contact lenses and lens cases for different types of microbial keratitis

Although contact lenses are widely used for vision correction, they are also the primary cause of a number of ocular diseases such as microbial keratitis (MK), etc. and inflammatory events such as infiltrative keratitis (IK), contact lens acute red eye (CLARE), contact lens-induced peripheral ulcer (CLPU), etc. These diseases and infiltrative events often result from microbial contamination of lens care solutions and lens cases that can be exacerbated by unsanitary lens care and extended lens wear. The treatment of microbial biofilms (MBs) on lens cases and contact lenses are complicated and challenging due to their resistance to conventional antimicrobial lens care solutions. More importantly, MK caused by MBs can lead to acute visual damage or even vision impairment. Therefore, the development of lens cases, lens care solutions, and contact lenses with effective antimicrobial performance against MK will contribute to the safe use of contact lenses. This review article summarizes and discusses different chemical approaches for the development of antimicrobial contact lenses and lens cases employing passive surface modifications, antimicrobial peptides, free-radical fabricating agents, quorum sensing quenchers, antibiotics, antifungal drugs and various metals and coatings with antimicrobial nanomaterials. The benefits and shortcomings of these approaches are assessed, and alternative solutions for future developments are discussed.

Antibacterial Nanopillar Array for an Implantable Intraocular Lens

Postsurgical intraocular lens (IOL) infection caused by pathogenic bacteria can result in blindness and often requires a secondary operation to replace the contaminated lens. The incorporation of an antibacterial property onto the IOL surface can prevent bacterial infection and postoperative endophthalmitis. This study describes a polymeric nanopillar array (NPA) integrated onto an IOL, which captures and eradicates the bacteria by rupturing the bacterial membrane. This is accomplished by changing the behavior of the elastic nanopillars using bending, restoration, and antibacterial surface modification. The combination of the polymer coating and NPA dimensions can decrease the adhesivity of corneal endothelial cells and posterior capsule opacification without causing cytotoxicity. An ionic antibacterial polymer layer is introduced onto an NPA using an initiated chemical vapor deposition process. This improves bacterial membrane rupture efficiency by increasing the interactions between the bacteria and nanopillars and damages the bacterial membrane using quaternary ammonium compounds. The newly developed ionic polymer-coated NPA exceeds 99% antibacterial efficiency against Staphylococcus aureus, which is achieved through topological and physicochemical surface modification. Thus, this paper provides a novel, efficient strategy to prevent postoperative complications related to bacteria contamination of IOL after cataract surgery.

Covalently Grafted 2-Methacryloyloxyethyl Phosphorylcholine Networks Inhibit Fibrous Capsule Formation around Silicone Breast Implants in a Porcine Model

The surface of human silicone breast implants is covalently grafted at a high density with a 2-methacryloyloxyethyl phosphorylcholine (MPC)-based polymer. Addition of cross-linkers is essential for enhancing the density and mechanical durability of the MPC graft. The MPC graft strongly inhibits not only adsorption but also the conformational deformation of fibrinogen, resulting in the exposure of a buried amino acid sequence, γ377-395, which is recognized by inflammatory cells. Furthermore, the numbers of adhered macrophages and the amounts of released cytokines (MIP-1α, MIP-1β, IL-8, TNFα, IL-1α, IL-1β, and IL-10) are dramatically decreased when the MPC network is introduced at a high density on the silicone surface (cross-linked PMPC-silicone). We insert the MPC-grafted human silicone breast implants into Yorkshire pigs to analyze the in vivo effect of the MPC graft on the capsular formation around the implants. After 6 month implantation, marked reductions of inflammatory cell recruitment, inflammatory-related proteins (TGF-β and myeloperoxidase), a myoblast marker (α-smooth muscle actin), vascularity-related factors (blood vessels and VEGF), and, most importantly, capsular thickness are observed on the cross-linked PMPC-silicone. We propose a mechanism of the MPC grafting effect on fibrous capsular formation around silicone implants on the basis of the in vitro and in vivo results.

Development of Poly(2-Methacryloyloxyethyl Phosphorylcholine)-Functionalized Hydrogels for Reducing Protein and Bacterial Adsorption

A series of hydrogels with intrinsic antifouling properties was prepared via surface-functionalization of poly(2-hydroxyethyl methacrylate) [p(HEMA)]-based hydrogels with the biomembrane-mimicking zwitterionic polymer, poly(2-methacryloyloxyethyl phosphorylcholine) [p(MPC)]. The p(MPC)-modified hydrogels have enhanced surface wettability, high water content retention (61.0%-68.3%), and good transmittance (>90%). Notably, the presence of zwitterionic MPC moieties at the hydrogel surfaces lowered the adsorption of proteins such as lysozyme and bovine serum albumin (BSA) by 73%-74% and 59%-66%, respectively, and reduced bacterial adsorption by approximately 10%-73% relative to the unmodified control. The anti-biofouling properties of the p(MPC)-functionalized hydrogels are largely attributed to the dense hydration layer formed at the hydrogel surfaces by the zwitterionic moieties. Overall, the results demonstrate that biocompatible and antifouling hydrogels based on p(HEMA)-p(MPC) structures have promising potential for application in biomedical materials.

Examination of 2-methacryloyloxyethyl phosphorylcholine polymer coated acrylic resin denture base material: surface characteristics and Candida albicans adhesion

The aim of this study is to evaluate the effects of 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer coating with various concentrations onto acrylic resin denture base material on surface characteristics such as contact angle and surface roughness and on Candida albicans adhesion which is the major factor of denture stomatitis. Specimens, prepared from heat-polymerized acrylic denture base material, were divided into control and three test groups, randomly. Surfaces of the specimens in test groups were coated with poly(MPC) (PMPC) by graft polymerization of MPC in different concentrations (0.25 mol/L; 0.50 mol/L and 0.75 mol/L), while no surface treatment was applied to the control group. Contact angles and surface roughness were examined, and chemical composition of the surfaces was analyzed by Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (FTIR) to verify the presence of PMPC coatings. Then, specimens were incubated with C. albicans for 18 h and the number of adhered cells was determined. Upon PMPC coating, the contact angle values statistically decreased, but no difference was found in surface roughness values. A statistically significant decrease was observed in C. albicans adhesion in parallel with the increase in the MPC polymer concentration. There was no significant difference between 0.50 mol/L and 0.75 mol/L groups in terms of adhesion. These findings indicated that graft polymerization of MPC on acrylic denture base material reduces the adhesion of C. albicans, and may be evaluated as a coating for prevention of denture stomatitis.

Strategies to design antimicrobial contact lenses and contact lens cases

Contact lens wear is a primary risk factor for developing ocular complications, such as contact lens acute red eye (CLARE), contact lens-induced peripheral ulcer (CLPU) and microbial keratitis (MK). Infections occur due to microbial contamination of contact lenses, lens cases and lens care solution, which are exacerbated by extended lens wear and unsanitary lens care practices. The development of microbial biofilms inside lens cases is an additional complication, as the developed biofilms are resistant to conventional lens cleaning solutions. Ocular infections, particularly in the case of MK, can lead to visual impairment or even blindness, so there is a pressing need for the development of antimicrobial contact lenses and cases. Additionally, with the increasing use of bandage contact lenses and contact lenses as drug depots and with the development of smart contact lenses, contact lens hygiene becomes a therapeutically important issue. In this review, we attempt to compile and summarize various chemical strategies for developing antimicrobial contact lenses and lens cases by using silver, free-radical producing agents, antimicrobial peptides or by employing passive surface modification approaches. We also evaluated the advantages and disadvantages of each system and tried to provide input to future directions. Finally, we summarize the developing technologies of therapeutic contact lenses to shed light on the future of contact lens applications.

Dental Composite Formulation Design with Bioactivity on Protein Adsorption Combined with Crack-Healing Capability

Short Title

Protein-repellent dental composite with crack-healing ability

Abstract

Fracture and secondary caries are the primary reasons for the failure of dental restorations. To face this omnipresent problem, we report the formulation design and synthesis of a protein-resistant dental composite composed of 2-methacryloyloxyethyl phosphorylcholine (MPC) that also can self-repair damage and recover the load-bearing capability via microencapsulated triethylene glycol dimethacrylate (TEGDMA) and N,N-dihydroxy ethyl-p-toluidine (DHEPT). The bioactivity of the resulting MPC-microencapsulated TEGDMA-DHEPT was evaluated on protein adsorption through early bacterial attachment. Its mechanical properties were also investigated, including self-healing assessment. Microcapsules of poly (urea-formaldehyde) (PUF) were synthesized by incorporating a TEGDMA-DHEPT healing liquid. A set of composites that contained 7.5% of MPC, 10% of microcapsules, and without MPC/microcapsules were also prepared as controls. The two distinct characteristics of strong protein repellency and load-bearing recovery were achieved by the combined strategies. The novel dual composite with a combination of protein-repellent MPC and PUF microcapsules for restoring microcracks is a promising strategy for dental restorations to address the two main challenges of fracture and secondary caries. The new dual composite formulation design has the potential to improve the longevity of dental restorations significantly.

Hydrogels as a Replacement Material for Damaged Articular Hyaline Cartilage

Hyaline cartilage is a strong durable material that lubricates joint movement. Due to its avascular structure, cartilage has a poor self-healing ability, thus, a challenge in joint recovery. When severely damaged, cartilage may need to be replaced. However, currently we are unable to replicate the hyaline cartilage, and as such, alternative materials with considerably different properties are used. This results in undesirable side effects, including inadequate lubrication, wear debris, wear of the opposing articular cartilage, and weakening of the surrounding tissue. With the number of surgeries for cartilage repair increasing, a need for materials that can better mimic cartilage, and support the surrounding material in its typical function, is becoming evident. Here, we present a brief overview of the structure and properties of the hyaline cartilage and the current methods for cartilage repair. We then highlight some of the alternative materials under development as potential methods of repair; this is followed by an overview of the development of tough hydrogels. In particular, double network (DN) hydrogels are a promising replacement material, with continually improving physical properties. These hydrogels are coming closer to replicating the strength and toughness of the hyaline cartilage, while offering excellent lubrication. We conclude by highlighting several different methods of integrating replacement materials with the native joint to ensure stability and optimal behaviour.

Surface PEGylation of intraocular lens for PCO prevention: An in vivo evaluation

Posterior capsular opacification (PCO) is a common complication in cataract surgery. The development of PCO is attributed to the combination of adhesion, migration, proliferation, and transdifferentiation of the residual lens epithelial cells (LEC) onto the interface of intraocular lens (IOL) material and lens posterior, in which the initial adhesion is the beginning step and plays important roles. In the present study, hydrophilic polyethylene glycol (PEG) was immobilized onto IOL surface via plasma-aided chemical grafting procedure. The attenuated total reflection - Fourier transform infrared (ATR-FTIR) and contact angle (CA) - measurements indicate the successful surface PEGylation, as well as the excellent hydrophilicity of the surfaces. Compared with pristine IOL, the PEGylation does not influent its optical property, whereas the initial adhesion of LEC is greatly inhibited. In vivo ocular implantation results show that the PEGylated IOL presents good in vivo biocompatibility, and can effectively prevent the PCO development.

Prevention of bacterial adhesion and biofilm formation on a vitamin E-blended, cross-linked polyethylene surface with a poly(2-methacryloyloxyethyl phosphorylcholine) layer

In the construction of artificial hip joint replacements, the surface and substrate of a cross-linked polyethylene (CLPE) liner are designed to achieve high wear resistance and prevent infection by bacteria. In this study, we fabricated a highly hydrophilic and antibiofouling poly(2-methacryloyloxyethyl phosphorylcholine [MPC]) (PMPC)-graft layer on the vitamin E-blended CLPE (HD-CLPE(VE)) surface. The 100-nm-thick, smooth, and electrically neutral PMPC layer was successfully fabricated on the HD-CLPE(VE) surface using photoinduced graft polymerization. The PMPC-grafted HD-CLPE(VE) was found to prevent bacterial adherence and biofilm formation on the surface because of the formation of a highly hydrophilic polyzwitterionic layer on the surface of HD-CLPE(VE), which can serve as an extremely efficient antibiofouling layer. The number of bacterial adhered on the PMPC-grafted HD-CLPE(VE) surface was reduced by 100-fold or more by PMPC grafting, regardless of the biofilm-production characteristics of the strains. In contrast, vitamin E blending did not affect bacterial adhesion. Moreover, the number of planktonic bacteria did not differ significantly, regardless of PMPC grafting and vitamin E blending. In conclusion, the PMPC-grafted HD-CLPE(VE) provided bacteriostatic effects associated with smooth, highly hydrophilic surfaces with a neutral electrostatic charge owing to the zwitterionic structure of the MPC unit. Thus, this modification may prove useful for the production of artificial hip joint replacement materials.

STATEMENT OF SIGNIFICANCE

Our preliminary in vitro findings suggest that improved bacteriostatic performance of the HD-CLPE(VE) surface in orthopedic implants is possible via PMPC grafting. The results also indicate that surface modifications affect the anti-infection properties of the orthopedic implants and demonstrate that the application of a PMPC-grafted HD-CLPE(VE) surface may be a promising approach to extend the longevity and clinical outcomes of total hip arthroplasty. Further research is needed to evaluate the resistance to infection of PMPC-grafted HD-CLPE(VE) in terms of the varieties of biofilm formation tests including fluid flow conditions and animal experiments, which may offer useful clues to the possible performance of these materials in vivo.

Biofilms in infections of the eye

The ability to form biofilms in a variety of environments is a common trait of bacteria, and may represent one of the earliest defenses against predation. Biofilms are multicellular communities usually held together by a polymeric matrix, ranging from capsular material to cell lysate. In a structure that imposes diffusion limits, environmental microgradients arise to which individual bacteria adapt their physiologies, resulting in the gamut of physiological diversity. Additionally, the proximity of cells within the biofilm creates the opportunity for coordinated behaviors through cell–cell communication using diffusible signals, the most well documented being quorum sensing. Biofilms form on abiotic or biotic surfaces, and because of that are associated with a large proportion of human infections. Biofilm formation imposes a limitation on the uses and design of ocular devices, such as intraocular lenses, posterior contact lenses, scleral buckles, conjunctival plugs, lacrimal intubation devices and orbital implants. In the absence of abiotic materials, biofilms have been observed on the capsule, and in the corneal stroma. As the evidence for the involvement of microbial biofilms in many ocular infections has become compelling, developing new strategies to prevent their formation or to eradicate them at the site of infection, has become a priority.

Does pelvic mesh treated with phosphorylcholine improve outcomes? An early experience

OBJECTIVES

Implantable devices treated with phosphorylcholine (PC) have been successfully used in cardiac, ophthalmic, and other applications. This surface modification has resulted in a reduction in the host inflammatory responses. This pilot study tested the safety and efficacy of PC treated polypropylene mesh grafts implanted for the treatment of pelvic organ prolapse.

STUDY DESIGN

Surgeons from five U.S. sites collected data on subjects implanted with Perigee IntePro Lite+PC. Pre-procedure data collected included demographics and prolapse severity. At follow-up, subjects were assessed for anatomical outcomes (success≤stage I POPQ or Baden Walker), symptomatic improvement, and complications, particularly mesh exposure.

RESULTS

A total of 40 subjects were enrolled with 80% (32/40) of them completing at least 5-7 months of follow-up. Mean patient age was 60 years (range 36-78 years) and the mean BMI was 28 (range 20-40). There were no cases of mesh exposure/extrusion or granuloma formation. The anatomical success rate was 100% at 5-7 months (32/32).

CONCLUSIONS

This is the first publication on pelvic mesh treated with PC. There were no adverse events attributed to this surface modification. However, as the numbers are small, the results are not statistically significant. PC surface modification of pelvic mesh shows promise in its application for the reduction of mesh related complications.

Mutation of crp mediates Serratia marcescens serralysin and global secreted protein production

The bacterial species Serratia marcescens secretes both beneficial and cytotoxic proteins. Here we report that a crp mutant exhibited elevated secreted protease activity. A genetic screen revealed that the gene coding for the metalloprotease serralysin was necessary for the elevated proteolysis, and this was confirmed by western blot analysis. Proteomic analysis of secreted proteins corroborated increased secretion of serralysin protease by crp mutants compared to the wild type. The crp-mutant-secreted fractions also contained less chitinase and chitin binding protein. These data support the hypothesis that cAMP-CRP is an upstream indirect regulator of serralysin production and they provide novel insight into the S. marcescens secretome.

Prevention, diagnosis, and management of acute postoperative bacterial endophthalmitis

This distillation of the peer-reviewed scientific literature on infection after cataract surgery summarizes background material on epidemiology, etiology, and pathogenesis, describes the roles of surgical technique and antibiotic prophylaxis in prevention, and discusses diagnostic and therapeutic interventions in cases of suspected endophthalmitis.

Novel polymer biomaterials and interfaces inspired from cell membrane functions

BACKGROUND

Materials with excellent biocompatibility on interfaces between artificial system and biological system are needed to develop any equipments and devices in bioscience, bioengineering and medicinal science. Suppression of unfavorable biological response on the interface is most important for understanding real functions of biomolecules on the surface. So, we should design and prepare such biomaterials. SCOOP OF REVIEW: One of the best ways to design the biomaterials is generated from mimicking a cell membrane structure. It is composed of a phospholipid bilayered membrane and embedded proteins and polysaccharides. The surface of the cell membrane-like structure is constructed artificially by molecular integration of phospholipid polymer as platform and conjugated biomolecules. Here, it is introduced as the effectiveness of biointerface with highly biological functions observed on artificial cell membrane structure.

MAJOR CONCLUSIONS

Reduction of nonspecific protein adsorption is essential for suppression of unfavorable bioresponse and achievement of versatile biomedical applications. Simultaneously, bioconjugation of biomolecules on the phospholipid polymer platform is crucial for a high-performance interface.

GENERAL SIGNIFICANCE

The biointerfaces with both biocompatibility and biofunctionality based on biomolecules must be installed on advanced devices, which are applied in the fields of nanobioscience and nanomedicine. This article is part of a Special Issue entitled Nanotechnologies - Emerging Applications in Biomedicine.

[Intraocular lens and bacterial adhesion: influence of the environmental factors, the characteristics of the bacteria, and the target material surface]

Adhesion of bacteria to intraocular lenses is an important step in the pathogenesis of postoperative endophthalmitis. It can be described as a two-phase process including an initial, instantaneous, and reversible phase followed by a time-dependant and irreversible molecular and cellular phase. The binding of bacteria is affected by many factors including environmental factors such as medium composition, presence of proteins and flow conditions, the bacterial cell surface characteristics, and the material's surface properties. This article reviews all these factors affecting the adhesion of bacteria to intraocular lenses. A better understanding of these mechanisms would make it possible to reduce the bacterial adhesion process and thus could help decrease the incidence of postoperative endophthalmitis.

Phosphorylcholine impairs susceptibility to biofilm formation of hydrogel contact lenses

PURPOSE

To compare silicone-hydrogel, poly(2-hydroxyethyl methacrylate) (pHEMA), and phosphorylcholine-coated (PC-C) contact lenses in terms of their susceptibility to biofilm formation by Staphylococcus epidermidis and Pseudomonas aeruginosa.

DESIGN

Laboratory investigation.

METHODS

Biofilm formation on colonized test lenses was evaluated with confocal microscopy and in vitro antibiotic susceptibility assays. The results of the latter assays were compared with those performed on planktonic cultures of the same organism.

RESULTS

For both microorganisms, sessile colonies on silicone-hydrogel and pHEMA lenses displayed lower antibiotic susceptibility than their planktonic counterparts. In contrast, the susceptibility of cultures growing on PC-C lenses was comparable with that for planktonic cultures. In particular, minimum inhibitory concentration for Tazocin (piperacillin plus tazobactam; Wyeth Pharmaceuticals, Aprilia, Italy; S. epidermidis) and gentamicin (P. aeruginosa) was identical, either in the presence of PC-C support or in planktonic cultures (Tazocin, </= 0.2 mug/ml; gentamicin, 0.4 mug/ml). Minimum inhibitory concentration for imipenem (P. aeruginosa) was two-fold higher for PC-C lenses (0.4 mug/ml) with respect to planktonic cultures (0.2 mug/ml). Confocal microscopy of lenses colonized for 24 hours with P. aeruginosa green fluorescent protein-expressing cells revealed a sessile colonization on silicone-hydrogel lens and a few isolated bacterial cells scattered widely over the surface of the PC-C lens.

CONCLUSIONS

An increase in antibiotic susceptibility of bacterial cultures was associated with diminished bacterial adhesion. Our results indicate that PC-C lenses seem to be more resistant than silicone-hydrogel and pHEMA lenses to bacterial adhesion and colonization. This feature may facilitate their disinfection.

An investigation of microbial adhesion to natural and synthetic polysaccharide-based films and its relationship with the surface energy components

In recent years, polysaccharide-based films have been developed for many applications. Some of these are in the pharmaceutical industry, where the adhesion of microorganisms to surfaces is a concern. After adhesion of a microorganism to a solid surface has taken place, the subsequent biofilm formed can act as a vehicle for spreading infections. The aim of this study is to compare the bacterial adhesion of E. coli and S. aureus from a contaminated solid model (Tryptone Soya Agar) to a range of polysaccharide-based films. These polysaccharide-based films consist of different natural starches (potato, cassava, wheat, pea and rice) and synthetic polymers hydroxyl-propyl cellulose (HPC) and carboxyl methyl cellulose (CMC)). The surface energy parameters of the films were calculated from the contact angle measurements by the sessile drop method. Apolar and polar liquids (water, formamide and hexadecane) and the Lifshitz-Van der Waals/acid-base (LW/AB) approach were used according to the method of Van Oss, Chaundhury and Good. The surface properties of the films were also correlated to the microbial adhesion. This indicated that, for both E. coli and S. aureus, the surface roughness did not affect the microbial adhesion. Only gamma(sAB) had any correlation with the microbial adhesion and gamma(sLW) was almost constant for all the various polysaccharide films tested. In addition, the electron-donor properties of the materials, exhibited via gamma(s+), were positively correlated with the adhesion of S. aureus but not with E. coli. This was in agreement with the results of the MATS (Microbial Adhesion To Solvents) test performed on the two bacteria. This revealed that only S. aureus presented an electron-acceptor characteristic.