Gibberellin-associated cisgenes modify growth, stature and wood properties in Populus

Genetic Improvement of Wheat for Drought Tolerance: Progress, Challenges and Opportunities

Wheat production and productivity are challenged by recurrent droughts associated with climate change globally. Drought and heat stress resilient cultivars can alleviate yield loss in marginal production agro-ecologies. The ability of some crop genotypes to thrive and yield in drought conditions is attributable to the inherent genetic variation and environmental adaptation, presenting opportunities to develop drought-tolerant varieties. Understanding the underlying genetic, physiological, biochemical, and environmental mechanisms and their interactions is key critical opportunity for drought tolerance improvement. Therefore, the objective of this review is to document the progress, challenges, and opportunities in breeding for drought tolerance in wheat. The paper outlines the following key aspects: (1) challenges associated with breeding for adaptation to drought-prone environments, (2) opportunities such as genetic variation in wheat for drought tolerance, selection methods, the interplay between above-ground phenotypic traits and root attributes in drought adaptation and drought-responsive attributes and (3) approaches, technologies and innovations in drought tolerance breeding. In the end, the paper summarises genetic gains and perspectives in drought tolerance breeding in wheat. The review will serve as baseline information for wheat breeders and agronomists to guide the development and deployment of drought-adapted and high-performing new-generation wheat varieties.

The Intragenesis and Synthetic Biology Approach towards Accelerating Genetic Gains on Strawberry: Development of New Tools to Improve Fruit Quality and Resistance to Pathogens

Under climate change, the spread of pests and pathogens into new environments has a dramatic effect on crop protection control. Strawberry (Fragaria spp.) is one the most profitable crops of the Rosaceae family worldwide, but more than 50 different genera of pathogens affect this species. Therefore, accelerating the improvement of fruit quality and pathogen resistance in strawberry represents an important objective for breeding and reducing the usage of pesticides. New genome sequencing data and bioinformatics tools has provided important resources to expand the use of synthetic biology-assisted intragenesis strategies as a powerful tool to accelerate genetic gains in strawberry. In this paper, we took advantage of these innovative approaches to create four RNAi intragenic silencing cassettes by combining specific strawberry new promoters and pathogen defense-related candidate DNA sequences to increase strawberry fruit quality and resistance by silencing their corresponding endogenous genes, mainly during fruit ripening stages, thus avoiding any unwanted effect on plant growth and development. Using a fruit transient assay, GUS expression was detected by the two synthetic FvAAT2 and FvDOF2 promoters, both by histochemical assay and qPCR analysis of GUS transcript levels, thus ensuring the ability of the same to drive the expression of the silencing cassettes in this strawberry tissue. The approaches described here represent valuable new tools for the rapid development of improved strawberry lines.

Genome-Wide Identification of Long Non-Coding RNAs and Their Potential Functions in Poplar Growth and Phenylalanine Biosynthesis

Poplar is an important bioenergy tree species. lncRNAs play important roles in various biological regulatory processes, and their expression pattern is more tissue-specific than mRNAs. In this study, P. deltoides “Danhong” (Pd) and P. simonii “Tongliao1” (Ps) with different growth rates and wood quality were used as experimental materials, and the transcriptomes of their shoot apical meristem, xylem, and phloem were sequenced. Furthermore, high-throughput RNA sequencing analysis revealed that the expression patterns of genes and lncRNAs are different between the two genotypes. 6,355 lncRNAs were identified. Based on target prediction, lncRNAs and target genes were involved in ADP binding, oxidoreductase activity, phenylpropanoid biosynthesis, and cyanoamino acid metabolism. The DElncRNAs in two poplars were co-expressed with transcription factors and structural genes of lignin and flavonoid pathways. In addition, we found the potential target lncRNAs of miRNA. This result provides basic evidence for a better understanding of the regulatory role of lncRNAs in regulating phenylalanine molecular pathways and wood formation.

Novel and emerging biotechnological crop protection approaches

Traditional breeding or genetically modified organisms (GMOs) have for a long time been the sole approaches to effectively cope with biotic and abiotic stresses and implement the quality traits of crops. However, emerging diseases as well as unpredictable climate changes affecting agriculture over the entire globe force scientists to find alternative solutions required to quickly overcome seasonal crises. In this review, we first focus on cisgenesis and genome editing as challenging biotechnological approaches for breeding crops more tolerant to biotic and abiotic stresses. In addition, we take into consideration a toolbox of new techniques based on applications of RNA interference and epigenome modifications, which can be adopted for improving plant resilience. Recent advances in these biotechnological applications are mainly reported for non-model plants and woody crops in particular. Indeed, the characterization of RNAi machinery in plants is fundamental to transform available information into biologically or biotechnologically applicable knowledge. Finally, here we discuss how these innovative and environmentally friendly techniques combined with traditional breeding can sustain a modern agriculture and be of potential contribution to climate change mitigation.

Olive (Olea europaea L.) Genetic Transformation: Current Status and Future Prospects

Olive (Olea europaea L.) is the most characteristic and important oil crop of the Mediterranean region. Traditional olive cultivation is based on few tens cultivars of ancient origin. To improve this crop, novel selections with higher tolerance to biotic and abiotic stress, adaptable to high-density planting systems and resilient to climate change are needed; however, breeding programs are hindered by the long juvenile period of this species and few improved genotypes have been released so far. Genetic transformation could be of great value, in the near future, to develop new varieties or rootstocks in a shorter time; in addition, it has currently become an essential tool for functional genomic studies. The recalcitrance of olive tissues to their in vitro manipulation has been the main bottleneck in the development of genetic transformation procedures in this species; however, some important traits such as fungal resistance, flowering or lipid composition have successfully been manipulated through the genetic transformation of somatic embryos of juvenile or adult origin, providing a proof of the potential role that this technology could have in olive improvement. However, the optimization of these protocols for explants of adult origin is a prerequisite to obtain useful materials for the olive industry. In this review, initially, factors affecting plant regeneration via somatic embryogenesis are discussed. Subsequently, the different transformation approaches explored in olive are reviewed. Finally, transgenic experiments with genes of interest undertaken to manipulate selected traits are discussed.

Manipulation of Growth and Architectural Characteristics in Trees for Increased Woody Biomass Production

Growth and architectural traits in trees are economically and environmentally important and thus of considerable importance to the improvement of forest and fruit trees. These traits are complex and result from the operation of a number of molecular mechanisms. This review will focus on the regulation of crown architecture, secondary woody growth and adventitious rooting. These traits and processes have significant impact on deployment, management, and productivity of tree crops. The majority of the described work comes from experiments in model plants, poplar, apple, peach, and plum because these species allow functional analysis of the involved genes and have significant genomics resources. However, these studies convincingly show conserved mechanisms for elaboration of specific growth and architectural traits. The conservation of these mechanisms suggest that they can be used as a blueprint for the improvement of these traits and processes in phylogenetically diverse tree crops. We will specifically consider the involvement of flowering time, transcription factors and hormone-associated genes. The review will also discuss the impact of recent technological advances as well as the challenges to the dissection of these traits in trees.

Genome Editing Tools in Plants

Genome editing tools have the potential to change the genomic architecture of a genome at precise locations, with desired accuracy. These tools have been efficiently used for trait discovery and for the generation of plants with high crop yields and resistance to biotic and abiotic stresses. Due to complex genomic architecture, it is challenging to edit all of the genes/genomes using a particular genome editing tool. Therefore, to overcome this challenging task, several genome editing tools have been developed to facilitate efficient genome editing. Some of the major genome editing tools used to edit plant genomes are: Homologous recombination (HR), zinc finger nucleases (ZFNs), transcription activator-like effector nucleases (TALENs), pentatricopeptide repeat proteins (PPRs), the CRISPR/Cas9 system, RNA interference (RNAi), cisgenesis, and intragenesis. In addition, site-directed sequence editing and oligonucleotide-directed mutagenesis have the potential to edit the genome at the single-nucleotide level. Recently, adenine base editors (ABEs) have been developed to mutate A-T base pairs to G-C base pairs. ABEs use deoxyadeninedeaminase (TadA) with catalytically impaired Cas9 nickase to mutate A-T base pairs to G-C base pairs.

Precision breeding for RNAi suppression of a major 4-coumarate:coenzyme A ligase gene improves cell wall saccharification from field grown sugarcane

Sugarcane (Saccharum spp. hybrids) is a major feedstock for commercial bioethanol production. The recent integration of conversion technologies that utilize lignocellulosic sugarcane residues as well as sucrose from stem internodes has elevated bioethanol yields. RNAi suppression of lignin biosynthetic enzymes is a successful strategy to improve the saccharification of lignocellulosic biomass. 4-coumarate:coenzyme A ligase (4CL) is a key enzyme in the biosynthesis of phenylpropanoid metabolites, such as lignin and flavonoids. Identifying a major 4CL involved in lignin biosynthesis among multiple isoforms with functional divergence is key to manipulate lignin biosynthesis. In this study, two full length 4CL genes (Sh4CL1 and Sh4CL2) were isolated and characterized in sugarcane. Phylogenetic, expression and RNA interference (RNAi) analysis confirmed that Sh4CL1 is a major lignin biosynthetic gene. An intragenic precision breeding strategy may facilitate the regulatory approval of the genetically improved events and was used for RNAi suppression of Sh4CL1. Both, the RNAi inducing cassette and the expression cassette for the mutated ALS selection marker consisted entirely of DNA sequences from sugarcane or the sexually compatible species Sorghum bicolor. Field grown sugarcane with intragenic RNAi suppression of Sh4CL1 resulted in reduction of the total lignin content by up to 16.5 % along with altered monolignol ratios without reduction in biomass yield. Mature, field grown, intragenic sugarcane events displayed 52-76 % improved saccharification efficiency of lignocellulosic biomass compared to wild type (WT) controls. This demonstrates for the first time that an intragenic approach can add significant value to lignocellulosic feedstocks for biofuel and biochemical production.

Next biotech plants: new traits, crops, developers and technologies for addressing global challenges

Most of the genetically modified (GM) plants currently commercialized encompass a handful of crop species (soybean, corn, cotton and canola) with agronomic characters (traits) directed against some biotic stresses (pest resistance, herbicide tolerance or both) and created by multinational companies. The same crops with agronomic traits already on the market today will continue to be commercialized, but there will be also a wider range of species with combined traits. The timeframe anticipated for market release of the next biotech plants will not only depend on science progress in research and development (R&D) in laboratories and fields, but also primarily on how demanding regulatory requirements are in countries where marketing approvals are pending. Regulatory constraints, including environmental and health impact assessments, have increased significantly in the past decades, delaying approvals and increasing their costs. This has sometimes discouraged public research entities and small and medium size plant breeding companies from using biotechnology and given preference to other technologies, not as stringently regulated. Nevertheless, R&D programs are flourishing in developing countries, boosted by the necessity to meet the global challenges that are food security of a booming world population while mitigating climate change impacts. Biotechnology is an instrument at the service of these imperatives and a wide variety of plants are currently tested for their high yield despite biotic and abiotic stresses. Many plants with higher water or nitrogen use efficiency, tolerant to cold, salinity or water submergence are being developed. Food security is not only a question of quantity but also of quality of agricultural and food products, to be available and accessible for the ones who need it the most. Many biotech plants (especially staple food) are therefore being developed with nutritional traits, such as biofortification in vitamins and metals. The main international seed companies continue to be the largest investors in plant biotechnology R&D, and often collaborate in the developing world with public institutions, private entities and philanthropic organizations. These partnerships are particularly present in Africa. In developed countries, plant biotechnology is also used for non-food purposes, such as the pharmaceutical, biofuel, starch, paper and textile industries. For example, plants are modified to specifically produce molecules with therapeutic uses, or with an improved biomass conversion efficiency, or producing larger volumes of feedstocks for biofuels. Various plant breeding technologies are now used in the entire spectrum of plant biotechnology: transgenesis producing proteins or RNAi. Cisgenesis (transgenes isolated from a crossable donor plant) and intragenesis (transgenes originate from the same species or a crossable species), null segregants are also used. To date, the next generation precision gene editing tools are developed in basic research. They include: clustered regularly interspaced short palindromic repeats (CRISPR), oligonucleotide-directed mutagenesis (ODM), transcription activator-like effects nucleases (TALENs) and zinc-finger nuclease (ZFN).

Plant hormone-assisted early family selection in Pinus densiflora via a retrospective approach

In an even-aged pine forest trees can vary considerably in stem size. We examined the basis for this anomaly using a retrospective approach. Twelve open-pollinated families of Pinus densiflora Sieb. et Zucc. were deliberately chosen for their variation in stem volumes at age 32 years. Seedlings obtained from these families were grown to age 6 months under optimal nursery conditions. Endogenous levels of growth hormones (auxin [IAA] and gibberellins [GAs]) and expression of the GA biosynthesis gene, PdGA20ox1, all assessed at age 3 months, were significantly correlated, across family, with seedling stem and/or shoot dry biomass at age 6 months. Retrospective comparisons of seedling growth, seedling stem tissue GA(20) and seedling stem expression levels of PdGA20ox1 were then made, across family, with tree stem growth at age 32 years. Age 6 months length and shoot dry biomass at age 6 months showed positive and significant Pearson's correlations with age 32 years tree stem diameters and a tree stem volume index, as did seedling stem tissue GA(20). Even seedling stem PdGA20ox1 expression levels were positively and near significantly (P = 0.088) correlated with age 32 years tree stem diameters. Auxin and GAs control nursery growth of seedlings at the family level, and this control also extends, for GAs at least, to field growth of older trees. We propose that family differences in PdGA20ox1 gene expression, and thus endogenous GA levels, may explain much of the natural variation seen for tree stem size in even-aged pine forests. If our hypothesis is correct, then the heritable components of variation in tree stem growth capacity should be predictable by hormonal and gene expression profiling. Such profiling, combined with the measurement of seedling phenotypic growth characters, could have the potential to accelerate the early selection of those conifer families that possess traits for inherently rapid stem wood growth.

New biotechnology enhances the application of cisgenesis in plant breeding

Cisgenesis is genetic modification to transfer beneficial alleles from crossable species into a recipient plant. The donor genes transferred by cisgenesis are the same as those used in traditional breeding. It can avoid linkage drag, enhance the use of existing gene alleles. This approach combines traditional breeding techniques with modern biotechnology and dramatically speeds up the breeding process. This allows plant genomes to be modified while remaining plants within the gene pool. Therefore, cisgenic plants should not be assessed as transgenics for environmental impacts.

Cisgenics - a sustainable approach for crop improvement

The implication of molecular biology in crop improvement is now more than three decades old. Not surprisingly, technology has moved on, and there are a number of new techniques that may or may not come under the genetically modified (GM) banner and, therefore, GM regulations. In cisgenic technology, cisgenes from crossable plants are used and it is a single procedure of gene introduction whereby the problem of linkage drag of other genes is overcome. The gene used in cisgenic approach is similar compared with classical breeding and cisgenic plant should be treated equally as classically bred plant and differently from transgenic plants. Therefore, it offers a sturdy reference to treat cisgenic plants similarly as classically bred plants, by exemption of cisgenesis from the current GMO legislations. This review covers the implications of cisgenesis towards the sustainable development in the genetic improvement of crops and considers the prospects for the technology.

Potential transgenic routes to increase tree biomass

Biomass is a prime target for genetic engineering in forestry because increased biomass yield will benefit most downstream applications such as timber, fiber, pulp, paper, and bioenergy production. Transgenesis can increase biomass by improving resource acquisition and product utilization and by enhancing competitive ability for solar energy, water, and mineral nutrients. Transgenes that affect juvenility, winter dormancy, and flowering have been shown to influence biomass as well. Transgenic approaches have increased yield potential by mitigating the adverse effects of prevailing stress factors in the environment. Simultaneous introduction of multiple genes for resistance to various stress factors into trees may help forest trees cope with multiple or changing environments. We propose multi-trait engineering for tree crops, simultaneously deploying multiple independent genes to address a set of genetically uncorrelated traits that are important for crop improvement. This strategy increases the probability of unpredictable (synergistic or detrimental) interactions that may substantially affect the overall phenotype and its long-term performance. The very limited ability to predict the physiological processes that may be impacted by such a strategy requires vigilance and care during implementation. Hence, we recommend close monitoring of the resultant transgenic genotypes in multi-year, multi-location field trials.

Proper gibberellin localization in vascular tissue is required to regulate adventitious root development in tobacco

Bioactive gibberellins (GAs) are involved in many developmental aspects of the life cycle of plants, acting either directly or through interaction with other hormones. Accumulating evidence suggests that GAs have an important effect on root growth; however, there is currently little information on the specific regulatory mechanism of GAs during adventitious root development. A study was conducted on tobacco (Nicotiana tabacum) plants for altered rates of biosynthesis, catabolism, and GA signalling constitutively or in specific tissues using a transgenic approach. In the present study, PtGA20ox, PtGA2ox1, and PtGAI were overexpressed under the control of the 35S promoter, vascular cambium-specific promoter (LMX5), or root meristem-specific promoter (TobRB7), respectively. Evidence is provided that the precise localization of bioactive GA in the stem but not in the roots is required to regulate adventitious root development in tobacco. High levels of GA negatively regulate the early initiation step of root formation through interactions with auxin, while a proper and mobile GA signal is required for the emergence and subsequent long-term elongation of established primordia. The results demonstrated that GAs have an inhibitory effect on adventitious root formation but a stimulatory effect on root elongation.

Tracing a key player in the regulation of plant architecture: the columnar growth habit of apple trees (Malus × domestica)

Plant architecture is regulated by a complex interplay of some key players (often transcription factors), phytohormones and other signaling molecules such as microRNAs. The columnar growth habit of apple trees is a unique form of plant architecture characterized by thick and upright stems showing a compaction of internodes and carrying short fruit spurs instead of lateral branches. The molecular basis for columnar growth is a single dominant allele of the gene Columnar, whose identity, function and gene product are unknown. As a result of marker analyses, this gene has recently been fine-mapped to chromosome 10 at 18.51-19.09 Mb [according to the annotation of the apple genome by Velasco (2010)], a region containing a cluster of quantitative trait loci associated with plant architecture, but no homologs to the well-known key regulators of plant architecture. Columnar apple trees have a higher auxin/cytokinin ratio and lower levels of gibberellins and abscisic acid than normal apple trees. Transcriptome analyses corroborate these results and additionally show differences in cell membrane and cell wall function. It can be expected that within the next year or two, an integration of these different research methodologies will reveal the identity of the Columnar gene. Besides enabling breeders to efficiently create new apple (and maybe related pear, peach, cherry, etc.) cultivars which combine desirable characteristics of commercial cultivars with the advantageous columnar growth habit using gene technology, this will also provide new insights into an elevated level of plant growth regulation.

Poplars with a PtDDM1-RNAi transgene have reduced DNA methylation and show aberrant post-dormancy morphology

The Arabidopsis thaliana DDM1 (Decreased DNA Methylation) gene is necessary for the maintenance of DNA methylation and heterochromatin assembly. In Arabidopsis, ddm1 mutants exhibit strong but delayed morphological phenotypes. We used RNA interference (RNAi) to suppress transcripts of two orthologous DDM1 paralogs in Populus trichocarpa and examined effects on whole plant phenotypes during perennial growth and seasonal dormancy. The RNAi-PtDDM1 transgenic poplars showed a wide range of DDM1 transcript suppression; the most strongly suppressed line had 37.5 % of the expression of the non-transgenic control. Genomic cytosine methylation (mC %) was 11.1 % in the non-transgenic control, compared with 9.1 % for the transgenic event with lowest mC %, a reduction of 18.1 %. An evaluation of greenhouse growth directly after acclimation of in vitro grown plants showed no developmental or growth rate abnormalities associated with the decrease in PtDDM1 expression. However, after a dormancy cycle and growth outdoors, a mottled leaf phenotype appeared in some of the transgenic insertion events that had strongly reduced PtDDM1 expression and DNA methylation. The phenotypic consequences of reduced DDM1 activity and DNA methylation appears to increase with cumulative plant propagation and growth.

Intragenesis and cisgenesis as alternatives to transgenic crop development

One of the major concerns of the general public about transgenic crops relates to the mixing of genetic materials between species that cannot hybridize by natural means. To meet this concern, the two transformation concepts cisgenesis and intragenesis were developed as alternatives to transgenesis. Both concepts imply that plants must only be transformed with genetic material derived from the species itself or from closely related species capable of sexual hybridization. Furthermore, foreign sequences such as selection genes and vector-backbone sequences should be absent. Intragenesis differs from cisgenesis by allowing use of new gene combinations created by in vitro rearrangements of functional genetic elements. Several surveys show higher public acceptance of intragenic/cisgenic crops compared to transgenic crops. Thus, although the intragenic and cisgenic concepts were introduced internationally only 9 and 7 years ago, several different traits in a variety of crops have currently been modified according to these concepts. Five of these crops are now in field trials and two have pending applications for deregulation. Currently, intragenic/cisgenic plants are regulated as transgenic plants worldwide. However, as the gene pool exploited by intragenesis and cisgenesis are identical to the gene pool available for conventional breeding, less comprehensive regulatory measures are expected. The regulation of intragenic/cisgenic crops is presently under evaluation in the EU and in the US regulators are considering if a subgroup of these crops should be exempted from regulation. It is accordingly possible that the intragenic/cisgenic route will be of major significance for future plant breeding.

A conceptual framework for restoration of threatened plants: the effective model of American chestnut (Castanea dentata) reintroduction

We propose a conceptual framework for restoration of threatened plant species that encourages integration of technological, ecological, and social spheres. A sphere encompasses ideas relevant to restoration and the people working within similar areas of influence or expertise. Increased capacity within a sphere and a higher degree of coalescing among spheres predict a greater probability of successful restoration. We illustrate this with Castanea dentata, a foundation forest tree in North America that was annihilated by an introduced pathogen; the species is a model that effectively merges biotechnology, reintroduction biology, and restoration ecology. Because of C. dentata's ecological and social importance, scientists have aggressively pursued blight resistance through various approaches. We summarize recent advancements in tree breeding and biotechnology that have emerged from C. dentata research, and describe their potential to bring new tools to bear on socio-ecological restoration problems. Successful reintroduction of C. dentata will also depend upon an enhanced understanding of its ecology within contemporary forests. We identify a critical need for a deeper understanding of societal influences that may affect setting and achieving realistic restoration goals. Castanea dentata may serve as an important model to inform reintroduction of threatened plant species in general and foundation forest trees in particular.

Genetic transformation of European chestnut somatic embryos with a native thaumatin-like protein (CsTL1) gene isolated from Castanea sativa seeds

The availability of a system for direct transfer of antifungal candidate genes into European chestnut (Castanea sativa Mill.) would offer an alternative approach to conventional breeding for production of chestnut trees tolerant to ink disease caused by Phytophthora spp. For the first time, a chestnut thaumatin-like protein gene (CsTL1), isolated from chestnut cotyledons, has been overexpressed in three chestnut somatic embryogenic lines. Transformation experiments have been performed using an Agrobacterium tumefaciens Smith and Townsend vector harboring the neomycin phosphotransferase (NPTII) selectable and the green fluorescent protein (EGFP) reporter genes. The transformation efficiency, determined on the basis of the fluorescence of surviving explants, was clearly genotype dependent and ranged from 32.5% in the CI-9 line to 7.1% in the CI-3 line. A total of 126 independent transformed lines were obtained. The presence and integration of chestnut CsTL1 in genomic DNA was confirmed by polymerase chain reaction (PCR) and Southern blot analyses. Quantitative real-time PCR revealed that CsTL1 expression was up to 13.5-fold higher in a transgenic line compared with its corresponding untransformed line. In only one of the 11 transformed lines tested, expression of the CsTL1 was lower than the control. The remaining 115 transformed lines were successfully subjected to cryopreservation. Embryo proliferation was achieved in all of the transgenic lines regenerated and the transformed lines showed a higher mean number of cotyledonary stage embryos and total number of embryos per embryo clump than their corresponding untransformed lines. Transgenic plants were regenerated after maturation and germination of transformed somatic embryos. Furthermore, due to the low plantlet conversion achieved, axillary shoot proliferation cultures were established from partially germinated embryos (only shoot development), which were multiplied and rooted according to procedures already established. Transgenic plants were acclimatized and grown in a greenhouse. No phenotypic differences were found with control plants, suggesting no potential cytotoxic effects of the green fluorescent protein. The results reported in the present work could be considered as a first step toward the production of fungal-disease tolerant cisgenic chestnut plants.

Transcriptome analyses of Populus x euramericana clone I-214 leaves exposed to excess zinc

Zinc (Zn) is an essential element for plant growth and development, but at high levels this metal can become toxic. Hyperaccumulator species are often not suitable for phytoremediation technologies because they need to be fast growing and have high biomass production, such as those of the Populus genus. Comparative genomics studies of poplars subjected to stress conditions such as heavy metal contamination have generated resources useful for improving the annotation of genes and have provided novel insights in the defense/tolerance mechanisms governing adaptation in non-hyperaccumulator plants. Using a microarray-based comparative analysis, we identified functional gene sets that are differentially regulated in the leaves of Populus × euramericana clone I-214 subjected to an excess but sub-lethal dose of Zn (1 mM). Eco-physiological and chemical analyses confirmed the results obtained in previous similar experiments. A total of 3861 expressed sequence tags (ESTs) were differentially expressed and grouped into two distinct libraries of up-regulated (40%) and down-regulated (60%) putative genes. The annotation of genes and gene products according to the Gene Ontology vocabularies was performed using Blast2GO software. The two transcriptome data sets were used to query all known Kyoto Encyclopedia of Genes and Genomes (KEGG) biosynthetic pathways of the genes identified in this study. The most represented molecular functions and biological processes were nucleotide binding and transcription, transport and response to stress and abiotic and biotic stimuli. The chloroplast, mitochondrion and their membrane systems were the cellular components most affected by excess Zn, as well as the photosynthetic, defense, sulfur and glutathione (GSH) metabolic pathways. The most up-regulated genes encoded electron carriers associated with ferrodoxin, the small subunit of ribulose-bisphosphate carboxylase oxygenase, and enzymes involved in GSH metabolism. This study is the most in-depth transcriptome and gene-annotation analysis of a hybrid poplar to date. The results are presented and critically discussed in terms of poplar response/tolerance to Zn stress for the characterization of non-hyperaccumulator phenotypes and the identification of candidate genes in perennial plants. These genetic findings provide useful information on tree species' adaptation to metal stress and provide powerful tools for the selection and/or genetic manipulation of stress-tolerant poplar clones.

The development of a cisgenic apple plant

Cisgenesis represents a step toward a new generation of GM crops. The lack of selectable genes (e.g. antibiotic or herbicide resistance) in the final product and the fact that the inserted gene(s) derive from organisms sexually compatible with the target crop should rise less environmental concerns and increase consumer's acceptance. Here we report the generation of a cisgenic apple plant by inserting the endogenous apple scab resistance gene HcrVf2 under the control of its own regulatory sequences into the scab susceptible apple cultivar Gala. A previously developed method based on Agrobacterium-mediated transformation combined with a positive and negative selection system and a chemically inducible recombination machinery allowed the generation of apple cv. Gala carrying the scab resistance gene HcrVf2 under its native regulatory sequences and no foreign genes. Three cisgenic lines were chosen for detailed investigation and were shown to carry a single T-DNA insertion and express the target gene HcrVf2. This is the first report of the generation of a true cisgenic plant.