Photostabilization of ascorbic acid with citric acid, tartaric acid and boric acid in cream formulations

Influence of ZnSO4 and Methyl Jasmonate on the Metabolites and Bioactivity Present in Lemon-Fruit Membrane Vesicles

Membrane vesicles isolated from vegetable tissues have shown promise in encapsulation technologies used in industries like food and cosmetics, offering innovative approaches to product development. However, their associated linked metabolites have not been studied. Lemon vesicle research not only adds value to the lemon crop (Citrus × limon L.), one of the most widely cultivated fruit trees in the world, is a source of bioactive compounds such as phenolics and organic acids. In this study, the influence of elicitation with ZnSO4 and methyl jasmonate, which modulate the bioactive metabolites, on fruit membrane vesicle bond metabolites was studied. The study showed that foliar application of ZnSO4 increased phenolic compounds as caffeic, sinapic, and chlorogenic acids and the flavonoid hesperidin by about 20% in lemons. Furthermore, a clear interaction between vesicles and citrate and ascorbate that were increased by methyl jasmonate were associated with their higher bioactivity. This was related to the double intrinsic in vitro antioxidant activities of these vesicles.

Reduction of surface treatment time by combination of citric acid and ascorbic acid while restoring shear bond strength of metal brackets bonded to bleached enamel: a pilot study

BACKGROUND

To investigate the effect of a 50% ascorbic acid with 50% citric acid solution on the immediate shear bond strength (SBS) of metallic brackets after tooth bleaching. The enamel etching pattern and the required quantity of these combined acids as antioxidants following 35% hydrogen peroxide (HP) bleaching were also determined.

METHODS

The stability of the solution at room temperature was assessed at various time intervals. Fifty teeth were randomly divided into five groups: non-bleached (G1), bleached then acid etched (G2), bleached followed by a 10-minute treatment with 10% sodium ascorbate and acid etched (G3), 5-minute treatment with 50% ascorbic acid (G4), and 5-minute treatment with a combination of 50% ascorbic acid and 50% citric acid (G5). Groups G2, G3, G4 and G5 were bleached by 35% HP gel for a total of 32 min. Acid etching in groups G1, G2, and G3 was performed using 37% phosphoric acid (Ormco®, Orange, CA, USA) for 15 s. In all groups, metal brackets were immediately bonded using Transbond™ XT primer and Transbond™ PLUS adhesive, with light curing for 40 s. The SBS was tested with a universal testing machine, and statistical analysis was conducted using one-way ANOVA followed by Tukey's HSD test. The level of significance was set at p < 0.05 for all statistical tests.

RESULTS

Stability tests demonstrated that the combined acids remained effective for up to 21 days. Group G5 significantly increased the SBS of bleached teeth to the level of G1 (p < 0.05), while G3 did not achieve the same increase in SBS (p > 0.05). SEM analysis revealed enamel etching patterns similar to those of both control groups (G1 and G2). Kinetic studies at 6 min indicated that the antioxidation in G5 reacted 0.2 mmole lower than in G3 and G4.

CONCLUSION

5-minute application of the combined acids enhanced the SBS of bleached teeth comparable to unbleached teeth. The combined acids remain stable over two weeks, presenting a time-efficient, single-step solution for antioxidant application and enamel etching in orthodontic bracket bonding.

Design of Novel Tricaprylin-Incorporated Multi-Layered Liposomal System for Skin Delivery of Ascorbic Acid with Improved Chemical Stability

L-ascorbic acid (Vit C) possesses a variety of dermatological functions in maintaining skin health and anti-aging properties. However, its topical application is challenging owing to its liability to light, oxygen, or heat. Therefore, in this study, a novel liposomal system, including a lipophilic neutral oil named a lipo-oil-some (LOS), was designed to improve the chemical stability and aid the skin absorption of Vit C. The vesicular systems were prepared using the ethanol injection method, employing phosphatidylcholine, cholesterol, dipalmitoyl-sn-glycerol-3-phosphoglycerol, and tricaprylin as neutral oil. The optimized LOS was characterized as follows: shape, multi-layered sphere; size, 981 nm; zeta potential, -58 mV; and Vit C encapsulation efficiency, 35%. The encapsulation of the labile compound into the novel system markedly enhanced photostability, providing over 10% higher Vit C remaining compared to Vit C solution or Vit C-loaded conventional liposome under a light intensity of 20,000 lx. On the other hand, the ex vivo skin permeation and accumulation of Vit C with the LOS system were comparable to those of smaller conventional liposomes (198 nm) in a Franz diffusion cell model mounted with porcine skin. Based on these findings, we concluded that the novel liposomal system could be utilized for skin delivery of Vit C with enhanced chemical stability.

Design of Ascorbic Acid Eutectic Mixtures With Sugars to Inhibit Oxidative Degradation

L-Ascorbic acid (ASC), commonly known as vitamin C, acts as an anti-oxidant in the biological system. It is extensively used as an excipient in pharmaceutical industry, food supplements in fruit juices, and food materials due to its free radicals scavenging activity. Main drawback of ASC is its poor aqueous stability owing to the presence of lactone moiety that is easily oxidized to dehydroascorbic acid and further degraded. To improve aqueous stability and inhibit oxidative degradation, ASC was co-crystallized to constitute binary eutectic compositions with mono and di-saccharides such as glucose, sucrose, lactose, and mannitol. The eutectics were confirmed by their (single) lower melting endotherm compared to ASC and sugars, although Powder X-ray diffraction (PXRD) and Fourier transform Infrared spectroscopy (FT-IR) data confirmed the characteristics of their physical mixture. Scanning electron microscope (SEM) images of the binary eutectics confirmed their irregular morphology. The ASC eutectics exhibited improved shelf-life by 2–5-fold in weakly acidic (pH 5) and neutral (pH 7) aqueous buffer medium, whereas the eutectic with glucose enhanced shelf-life only by 1.1–1.2-fold in acidic medium (pH 3.3 and 4). Notably, stabilizing effect of the sugar eutectics decreased with increasing acidity of the medium. In addition, higher binding energy of the disaccharide eutectics partially supports the aqueous stability order of ASC in the neutral pH medium due to more number of non-bonded interactions than that of monosaccharides.

Engineering biodegradable polyester elastomers with antioxidant properties to attenuate oxidative stress in tissues

Oxidative stress plays an important role in the limited biological compatibility of many biomaterials due to inflammation, as well as in various pathologies including atherosclerosis and restenosis as a result of vascular interventions. Engineering antioxidant properties into a material is therefore a potential avenue to improve the biocompatibility of materials, as well as to locally attenuate oxidative stress-related pathologies. Moreover, biodegradable polymers that have antioxidant properties built into their backbone structure have high relative antioxidant content and may provide prolonged, continuous attenuation of oxidative stress while the polymer or its degradation products are present. In this report, we describe the synthesis of poly(1,8-octanediol-co-citrate-co-ascorbate) (POCA), a citric-acid based biodegradable elastomer with native, intrinsic antioxidant properties. The in vitro antioxidant activity of POCA as well as its effects on vascular cells in vitro and in vivo were studied. Antioxidant properties investigated included scavenging of free radicals, iron chelation and the inhibition of lipid peroxidation. POCA reduced reactive oxygen species generation in cells after an oxidative challenge and protected cells from oxidative stress-induced cell death. Importantly, POCA antioxidant properties remained present upon degradation. Vascular cells cultured on POCA showed high viability, and POCA selectively inhibited smooth muscle cell proliferation, while supporting endothelial cell proliferation. Finally, preliminary data on POCA-coated ePTFE grafts showed reduced intimal hyperplasia when compared to standard ePTFE grafts. This biodegradable, intrinsically antioxidant polymer may be useful for tissue engineering application where oxidative stress is a concern.

Photodegradation and stabilization of betamethasone-17 valerate in aqueous/organic solvents and topical formulations

The effects of solvent [acetonitrile, methanol, and acetonitrile/water mixture (20:80, v/v)], buffer concentration (phosphate buffer, pH 7.5), ionic strength and commonly employed adjuvants on the photodegradation of betamethasone-17 valerate in cream and gel formulations have been studied on exposure to UV light (300-400 nm). A validated high-performance liquid chromatography method has been used to determine the parent compound and its photodegraded products. The photodegradation data in the studied solvents showed greater decomposition of the drug in solvents with a lower dielectric constant. A comparatively higher rate of photodegradation was observed in the cream formulation compared to that for the gel formulation. The kinetic treatment of the photodegradation data revealed that the degradation of the drug follows first-order kinetics and the apparent first-order rate constants for the photodegradation reactions, in the media studied, range from 1.62 to 11.30×10(-3) min(-1). The values of the rate constants decrease with increasing phosphate concentration and ionic strength which could be due to the deactivation of the excited state and radical quenching. The second-order rate constant (k') for the phosphate ion-inhibited reactions at pH 7.5 has been found to be 5.22×10(-2) M(-1) s(-1). An effective photostabilization of the drug has been achieved in cream and gel formulations with titanium dioxide (33.5-42.5%), vanillin (21.6-28.7%), and butyl hydroxytoluene (18.2-21.6%).