Case report: Reconstruction of a complex maxillofacial gunshot defect using a titanium patient-specific implant in a dog

This report describes the surgical reconstruction of large maxillofacial defect caused by a short-range gunshot injury in a dog using titanium patient-specific implant (PSI). A 3-year-old male Wolf Shepherd was admitted for a large right facial defect with right nasal cavity exposure caused by a gunshot injury. Radiographic examination revealed severe loss of the right maxillary, nasal, and incisive bones, multiple fractures of both left and right palatine bones, and a comminuted fracture of the right mandible. Initial surgical procedure included computed tomography (CT) imaging for three-dimensional (3D) implant design. Open wound management was maintained for 18 days until the fresh granulation tissue fully covered the wound bed. The implant was designed in a “hand grasping shape” to cover the defect, align multiple fractured palatine bones, and make a snap fit function. Multiple holes, including cortical screw holes, were added to the final design. The implant was printed on a titanium alloy. Surgical application of titanium PSI was performed 19 days after the primary surgery. A free sublingual mucosal graft was used to reconstruct the mucosal layer of the right nasal cavity. The mucosa was then covered with collagen membrane to strengthen the structure of the nasal cavity. Blunt dissection of the hard palate mucoperiosteum above the palatine process and palatine bones, soft tissue above the maxilla was performed, and the 3D printed titanium implant was fastened in a preplanned position. The facial soft tissue defect was reconstructed, and the titanium PSI was covered using an angularis oris cutaneous flap. Partial flap necrosis occurred in the rostral aspect, and the wound was managed to heal by a second intension. Flap dehiscence at the junction of the flap and hard palate mucoperiosteum occurred with exposure of the implant 2 days postoperatively. Multiple attempts to close the defect failed, and the owner wanted to stop treatment. Healthy granulated tissue was observed proximal to the implant. The defect no longer increased in size and did not show any noticeable complications related to the defect at 60 days after titanium PSI application, and the dog was discharged. Six months post-operatively, the dog remained active with great appetite, gained weight, and showed acceptable facial symmetry without enlargement of the implant exposure or any implant-related problems.

Craniomaxillofacial trauma in immature dogs–etiology, treatments, and outcomes

Treatment of craniomaxillofacial (CMF) trauma in dogs often requires a multidisciplinary approach and a thorough understanding of the CMF anatomical structures involved. This retrospective study aimed to utilize computed tomography (CT) studies of immature dogs evaluated for CMF trauma and to describe common fracture locations, treatment modalities, and complications, as well as the fracture healing outcomes. The medical records and CT studies of 94 dogs under 1 year of age over a 13-year period were evaluated. The skeletal location of CMF fractures, as well as the severity of displacement and fragmentation of each fracture, was recorded. Case demographic data and trauma etiology were also recorded. Animal bites accounted for the majority of trauma (71.0%). The most likely bone or region to be fractured was the maxillary bones, followed by the molar region of the mandibles. Up to 37 bones or specific regions were fractured in any given patient, with an average of 8.8 ± 3.1 fractured bones or regions per dog. Rostral mandibular trauma was associated with intra-articular fractures of the temporomandibular joint (p = 0.016). Patients sustained concomitant injuries in 32% of the cases. Muzzle therapy was the main treatment performed for most dogs (53.2%), followed by soft tissue closure (47.9%) and selective dental extractions (27.6%). Healing complications were recorded in 71.6% of the dogs, with malocclusion being the most reported complication (55.2%), and associated with dentate mandibular jaw fractures (p = 0.05). The average number of complications per dog was 2.4. No statistically significant association was found between treatment modality and healing outcome. There was a positive correlation between the severity of fracture fragmentation and displacement and a negative healing outcome (all rho >0.7). Further treatment was required in 55.6% of the dogs. Additional dental extractions were performed in 77.7% of patients. Healing complications were common in the immature CMF trauma case. Thus, the need for a comprehensive assessment of the entire CMF region during the initial visit, as well as follow-up, preferably using CT or cone beam CT, is underscored.

Application of a bilateral temporal fascia free graft in a dog with multifragmented frontal sinus and nasal bone fracture

OBJECTIVE

To describe the use of temporal fascia free grafts to treat dorsal open comminuted frontal sinus and nasal fractures.

ANIMAL

One Belgian shepherd dog.

STUDY DESIGN

Case report METHODS: A 5-year-old spayed female Belgian shepherd was admitted with severe facial deformation due to trauma. A deep, 3 cm wide wound was present between the nose and the frontal sinus. No abnormalities were detected on neurological examination. On computed tomographic examination, comminuted open fractures of the frontal and nasal bones were associated with a severe depression of the dorsal wall and presence of bone fragments in the sinus cavities. Bone fragments were apposed with polydioxanone monofilament suture. Bilateral temporal fascia grafts were placed over the bone fragments.

RESULTS

The integrity of the frontal and nasal cavities, and the facial profile of the dog were restored. No short-term or long-term complications were observed after 4 months follow up.

CONCLUSION

The innovative combination of suture apposition of bone fragments and a temporal fascia free graft resulted in very satisfying long-term outcomes in a dog with open sinus and nasal bone fractures.

Patient Triage, First Aid Care, and Management of Oral and Maxillofacial Trauma

Maxillofacial trauma is a common presentation in veterinary medical practice. Accurate assessment, diagnostics, pain management, and finally repair are tenants to treatment. In addition to typical tenants for fracture repair, the restoration of occlusion and return to function (eating, drinking, grooming) are unique to trauma management in these patients. Options for repair include conservative management (tape muzzles), noninvasive repair techniques (interdental wiring and composite splinting), and invasive repair techniques (interfragmentary wiring and plate and screw fixation).

Titanium mesh osteosynthesis for the treatment of severely comminuted maxillofacial fractures in four dogs

INTRODUCTION

Major goals in maxillofacial fracture treatment include to restore the dental occlusion, stabilise the major skeletal supports, restore the contour of the face and achieve proper function and appearance of the face. Titanium is considered an optimal material for maxillofacial reconstruction due to its biocompatibility, high strength, minimal inflammatory reaction and minimal imaging artefact.

OBJECTIVES

To describe the clinical details, surgical technique, pre- and postoperative imaging and short- and long-term follow-up of severely comminuted maxillofacial fractures treated with titanium mesh and titanium screws in dogs.

MATERIALS AND METHODS

Retrospective short case series included four client-owned dogs with maxillofacial fractures. After appropriate medical stabilisation, preoperative CT examination of the head was obtained in all patients for evaluation of fracture configuration and surgical planning. The maxillofacial fractures were stabilised by titanium mesh osteosynthesis. Short- and long-term clinical and radiographic follow-ups were available for all dogs.

RESULTS

Proper dental occlusion and reconstruction of the anatomic buttresses was achieved in all cases. All dogs recovered uneventfully from the surgery and no complications were recorded on the long-term follow-up up to 43 months. Occlusion was maintained in all dogs, as well as excellent cosmesis of the midface.

CLINICAL SIGNIFICANCE

Titanium mesh osteosynthesis can achieve sufficient rigidity and lead to uncomplicated healing of severely comminuted maxillofacial fractures. This internal fixation method can be considered a valuable option to treat maxillofacial fractures in particular in cases of large bone defect and midface reconstruction.

World Small Animal Veterinary Association Global Dental Guidelines

Dental, oral, and maxillofacial diseases are some of the most common problems in small animal veterinary practice. These conditions create significant pain as well as localized and potentially systemic infection. As such, the World Small Animal Veterinary Association (WSAVA) believes that un- and under treated oral and dental diseases pose a significant animal welfare concern. Dentistry is an area of veterinary medicine which is still widely ignored and is subject to many myths and misconceptions. Effective teaching of veterinary dentistry in the veterinary school is the key to progression in this field of veterinary medicine, and to the improvement of welfare for all our patients globally. These guidelines were developed to provide veterinarians with the information required to understand best practices for dental therapy and create realistic minimum standards of care. Using the three-tiered continuing education system of WSAVA, the guidelines make global equipment and therapeutic recommendations and highlight the anaesthetic and welfare requirements for small animal patients. This document contains information on common oral and dental pathologies, diagnostic procedures (an easily implementable and repeatable scoring system for dental health, dental radiography and radiology) and treatments (periodontal therapy, extractions). Further, there are sections on anaesthesia and pain management for dental procedures, home dental care, nutritional information, and recommendations on the role of the universities in improving veterinary dentistry. A discussion of the deleterious effects of anaesthesia free dentistry (AFD) is included, as this procedure is ineffective at best and damaging at worst. Throughout the document the negative effects of undiagnosed and/or treated dental disease on the health and well-being of our patients, and how this equates to an animal welfare issue, is discussed.

Craniomaxillofacial Trauma in Dogs-Part I: Fracture Location, Morphology and Etiology

Treatment of craniomaxillofacial (CMF) trauma in dogs often requires a multidisciplinary approach and a thorough understanding of the CMF skeletal structures involved. The aim of this retrospective study was to use a large number of CT studies of dogs evaluated for CMF trauma and to describe fracture location and morphology in relation to demographic data and trauma etiology. The medical records and CT studies of 165 dogs over a 10-year period were evaluated. The skeletal location of CMF fractures as well as the severity of displacement and fragmentation of each fracture was recorded. Patient demographic data and trauma etiology were also recorded. Animal bites accounted for the majority of trauma (50%), followed by unknown trauma (15%), vehicular accidents (13%), and blunt force trauma (13%). Small dogs, <10 kg, and juveniles accounted for the majority of patients (41.8 and 25.5%, respectively). The most likely bone or region to be fractured was the maxillary bone, followed by the premolar and molar regions of the mandible. Up to 37 bones or regions were fractured in any given patient, with an average of 8.2 fractured bones or regions per dog. The most commonly fractured location varied according to trauma etiology. Specifically, vehicular accidents tended to result in more locations with a higher probability of fracture than other trauma types. A major conclusion from this study is that every bone of the CMF region was fractured in at least one case and many cases had a large number of fractured regions. Thus, the need for comprehensive assessment of the entire CMF region, preferably using CT, is underscored.

Treatment of calvarial defects by resorbable and non-resorbable sonic activated polymer pins and mouldable titanium mesh in two dogs: a case report

BACKGROUND

To date, calvarial defects in dogs have traditionally been addressed with different types of implants including bone allograft, polymethylmethacrylate and titanium mesh secured with conventional metallic fixation methods. This report describes the use of an absorbable and non absorbable novel polymer fixation method, Bonewelding® technology, in combination with titanium mesh for the repair of calvarial defects in two dogs. The clinical outcomes and comparative complication using resorbable and non-resorbable thermoplastic pins were compared.

CASE PRESENTATION

This report of two cases documents the repair of a traumatic calvarial fracture in an adult male Greyhound and a cranioplasty following frontal bone tumor resection in an adult female Cavalier King Charles Spaniel with the use of a commercially available titanium mesh secured with an innovative thermoplastic polymer screw system (Bonewelding®). The treatment combination aimed to restore cranial structure, sinus integrity and cosmetic appearance. A mouldable titanium mesh was cut to fit the bone defect of the frontal bone and secured with either resorbable or non-resorbable polymer pins using Bonewelding® technology. Gentamycin-impregnated collagen sponge was used intraoperatively to assist with sealing of the frontal sinuses. Calvarial fracture and post-operative implant positioning were advised using computed tomography. A satisfactory restoration of skull integrity and cosmetic result was achieved, and long term clinical outcome was deemed clinically adequate with good patient quality of life. Postoperative complications including rostral mesh uplift with minor associated clinical signs were encountered when resorbable pins were used. No postoperative complications were experienced in non-resorbable pins at 7 months follow-up, by contrast mesh uplift was noted 3 weeks post-procedure in the case treated using absorbable pins.

CONCLUSIONS

The report demonstrates the innovative use of sonic-activated polymer pins (Bonewelding® technology) alongside titanium mesh is a suitable alternative technique for skull defect repair in dogs. The use of Bonewelding® may offer advantages in reduction of surgical time. Further, ultrasonic pin application may be less invasive than alternative metallic fixation and potentially reduces bone trauma. Polymer systems may offer enhanced mesh-bone integration when compared to traditional metallic implants. The use of polymer pins demonstrates initial potential as a fixation method in cranioplasty. Initial findings in a single case comparison indicate a possible advantage in the use of non-absorbable over the absorbable systems to circumvent complications associated with variable polymer degradation, further long term studies with higher patient numbers are required before reliable conclusions can be made.

Surgical repair of a severely comminuted maxillary fracture in a dog with a titanium locking plate system

A four-year old male Labrador Retriever was admitted with head trauma after being hit by a car. The dog had sustained multiple nasal, maxillary, and frontal bone fractures that resulted in separation of the maxilla from the base of the skull. A severely comminuted left zygomatic arch fracture was also present. These fractures were all repaired using a point contact, locking titanium plate system, in a single procedure that resulted in excellent postoperative occlusion and immediate function. Healing was uneventful. Full function and excellent cosmetic appearance were evident 13 months after surgery. This case illustrates the ease of repair and the success of treatment of severely comminuted maxillofacial fractures by conforming to basic biomechanical principles taken directly from the human experience and successfully applied to the dog; these included multiple plate application along the buttresses and trusses of the facial skeleton. The plate fixation was applied to bridge the multiple fractures along the most appropriate lines of stress. The small size of the plates, and the ability to easily contour them to adapt to the bone surface in threedimensions, allowed their placement in the most appropriate positions to achieve sufficient rigidity and lead to uncomplicated healing without any postoperative complications.

Biomechanical evaluation of two plating configurations for fixation of a simple transverse caudal mandibular fracture model in cats

OBJECTIVE To evaluate biomechanical properties of intact feline mandibles, compared with those for mandibles with an experimentally created osteotomy that was stabilized with 1 of 2 internal fixation configurations. SAMPLE 20 mandibles from 10 adult feline cadavers. PROCEDURES An incomplete block study design was used to assign the mandibles of each cadaver to 2 of 3 groups (locking plate with locking screws [locking construct], locking plate with nonlocking screws [nonlocking construct], or intact). Within each cadaver, mandibles were randomly assigned to the assigned treatments. For mandibles assigned to the locking and nonlocking constructs, a simple transverse osteotomy was created caudal to the mandibular first molar tooth after plate application. All mandibles were loaded in cantilever bending in a single-load-to-failure test while simultaneously recording load and actuator displacement. Mode of failure (bone or plate failure) was recorded, and radiographic evidence of tooth root and mandibular canal damage was evaluated. Mechanical properties were compared among the 3 groups. RESULTS Stiffness, bending moments, and most post-yield energies for mandibles with the locking and nonlocking constructs were significantly lower than those for intact mandibles. Peak bending moment and stiffness for mandibles with the locking construct were significantly greater than those for mandibles with the nonlocking construct. Mode of failure and frequency of screw damage to tooth roots and the mandibular canal did not differ between the locking and nonlocking constructs. CONCLUSIONS AND CLINICAL RELEVANCE Results indicated that both fixation constructs were mechanically inferior to intact mandibles. The locking construct was mechanically stronger than the nonlocking construct.

The application of 3-dimensional printing for preoperative planning in oral and maxillofacial surgery in dogs and cats

OBJECTIVE

To describe the application of 3-dimensional (3D) printing in advanced oral and maxillofacial surgery (OMFS) and to discuss the benefits of this modality in surgical planning, student and resident training, and client education.

STUDY DESIGN

Retrospective case series.

ANIMALS

Client-owned dogs (n = 28) and cats (n = 4) with 3D printing models of the skulls.

METHODS

The medical records of 32 cases with 3D printing prior to major OMFS were reviewed.

RESULTS

Indications for 3D printing included preoperative planning for mandibular reconstruction after mandibulectomy (n = 12 dogs) or defect nonunion fracture (n = 6 dogs, 2 cats), mapping of ostectomy location for temporomandibular joint ankylosis or pseudoankylosis (n = 4 dogs), assessment of palatal defects (n = 2 dogs, 1 cat), improved understanding of complex anatomy in cases of neoplasia located in challenging locations (n = 2 dogs, 1 cat), and in cases of altered anatomy secondary to trauma (n = 2 dogs).

CONCLUSION

In the authors' experience, 3D printed models serve as excellent tools for OMFS planning and resident training. Furthermore, 3D printed models are a valuable resource to improve clients' understanding of the pet's disorder and the recommended treatment.

CLINICAL RELEVANCE

Three-dimensional printed models should be considered viable tools for surgical planning, resident training, and client education in candidates for complex OMFS.