Bacterial doubling time modulates the effects of opsonisation and available iron upon interactions between Staphylococcus aureus and human neutrophils

The potential role of through the needle PIVC insertion in reducing early catheter contamination

HIGHLIGHTS

Over-the-needle (OTN) PIVC devices are at inherent risk of insertion related skin contamination. Through-the-needle (TTN) catheter deployment resulted in no measurable contamination in this study. OTN catheters were 1.67 times more likely to be contaminated than TTN in this study.

AIM

To compare a traditional over-the-needle peripheral intravenous catheter device to a through-the-needle (TTN) peripheral intravenous catheter device for early bacterial contamination during insertion.

METHODS

Five TTN test devices (OspreyIV 20 g SkyDance Vascular, Inc) and 5 OTN comparative devices (Insyte Autoguard 20 g Becton Dickinson) were aseptically inserted through targeted zones inoculated with 1 mL aliquot suspension of approximately 1 × 10 CFU of Staphylococcus aureus among 3 healthy sheep. Immediately after insertion, each study catheter was surgically removed from the surrounding tissue and cultured for the presence of Staphylococcus aureus inoculum that may have been transferred to the catheter during insertion.

RESULTS

Final culture results of the 5 test articles found no bacterial colonies. Final culture results of the 5 comparative articles revealed 2 of 5 were contaminated with bacterial colonies. The absolute risk reduction is 40%, or a 40% rate of contamination drops to a 0% rate of contamination when the TTN catheter deployment was used. The risk ratio achieved was 1.67, indicating catheters placed using the OTN deployment were 1.67 times more like to be contaminated than the TTN deployed catheters.

CONCLUSION

In this present ovine study, the data revealed that use of a novel TTN approach resulted in less contamination than the more traditional OTN approach. Traditional OTN devices, developed over 70 years ago, are at inherent risk of insertion-related contact contamination. The results of this research, as well as previously published studies, point toward considering physical catheter protection strategies such as TTN devices as a potential alternative to OTN devices.

Valorization of Invasive Plant Extracts against the Bispecies Biofilm Staphylococcus aureus-Candida albicans by a Bioguided Molecular Networking Screening

Invasive plants efficiently colonize non-native territories, suggesting a great production of bioactive metabolites which could be effective antibiofilm weapons. Our study aimed to look for original molecules able to inhibit bispecies biofilm formed by S. aureus and C. albicans. Extracts from five invasive macrophytes (Ludwigia peploides, Ludwigia grandiflora, Myriophyllum aquaticum, Lagarosiphon major and Egeria densa) were prepared and tested in vitro against 24 h old bispecies biofilms using a crystal violet staining (CVS) assay. The activities of the extracts reducing the biofilm total biomass by 50% or more were comparatively analyzed against each microbial species forming the biofilm by flow cytometry (FCM) and scanning electron microscopy. Extracts active against both species were fractionated. Obtained fractions were analyzed by UHPLC-MS/MS and evaluated by the CVS assay. Chemical and biological data were combined into a bioactivity-based molecular networking (BBMN) to identify active compounds. The aerial stem extract of L. grandiflora showed the highest antibiofilm activity (>50% inhibition at 50 µg∙mL−1). The biological, chemical and BBMN investigations of its fractions highlighted nine ions correlated with the antibiofilm activity. The most correlated compound, identified as betulinic acid (BA), inhibited bispecies biofilms regardless of the three tested couples of strains (ATCC strains: >40% inhibition, clinical isolates: ≈27% inhibition), confirming its antibiofilm interest.

"Barcode" cell sensor microfluidic system: Rapid and sample-to-answer antimicrobial susceptibility testing applicable in resource-limited conditions

Many rapid antimicrobial susceptibility testing (AST) methods have been proposed to contain clinical antimicrobial resistance (AMR) and preserve the effectiveness of remaining antimicrobials. However, far fewer methods have been proposed to test AMR in resource-limited conditions, such as for frequent safety screenings of water/food/public facilities, urgent surveys of massive samples during a pandemic, or AMR tests in low-income countries. Rapid AST methods realized thus far have a variety of drawbacks when used for such surveys, e.g., high cost and the requirement of expensive instruments such as microscopy. A more reasonable strategy would be to screen samples via onsite testing first, and then send any sample suspected to contain AMR bacteria for advanced testing. Accordingly, a cost-efficient AST is demanded, which can rapidly process a large number of samples without using expensive equipment. To this end, current work demonstrates a novel "barcode" cell sensor based on an adaptive linear filter array as a fully automatic and microscope-free method for counting very small volumes of cells (~1.00 × 10⁴ cells without pre-incubation), wherein suspended cells concentrate into microbars with length proportional to the number of cells. We combined this sensor with an on-chip culture approach we had demonstrated for rapid and automated drug exposure and realized a low-cost and resource-independent platform for portable AST, from which results can be obtained simply through a cell phone. This method has a much shorter turnaround time (2-3 h) than that of standard methods (16-24 h). Thanks to its microscopy-free analysis, affordability, portability, high throughput, and user-friendliness, our "barcode" AST system has the potential to fulfill the various demands of AST when advanced facilities are not available, making it a promising new tool in the fight against AMR.

Time-dependent behavior of the Staphylococcus aureus biofilm following exposure to cold atmospheric pressure plasma

Objective(s):

Formation of Staphylococcus aureus biofilm leads to persistent infection in tissue or on exter-nal and indwelling devices in patients. Cold atmospheric plasma (CAP) is used for eradication of bacterial biofilms and it has diverse applications in the healthcare system. However, there is not sufficient information on the behavior of biofilms during the CAP exposure period.

Materials and Methods:

Pre-established S. aureus biofilms were exposed to CAP for 0 to 360 sec, then subjected to washing steps and sonication. Subsequently, biomass, number of colonies, vitality of bacteria, structure of colonies, size of produced particles, and viability of bacteria were evaluated by different assays including crystal violet, colony-forming unit, MTT, scanning electron mi-croscopy, confocal laser scanning microscopy, and dynamic light scattering assays.

Results:

The results showed that the strength of biomass increased in the first 60 sec, then decreased to less than no-CAP treated controls. Moreover, short CAP exposure (≤60 sec) ehances the fusion of the biofilm extracellular matrix and other components, which results in preservation of bacteria during ultra-sonication and washing steps compared with control biofilms. The S. aureus biofilm structure only breaks down following more CAP exposure (> 90 sec) and demolition. Interestingly, the 60 sec CAP exposure could cause the fusion of biofilm compo-nents, and large particles are detectable.

Conclusion:

According to this study, an inadequate CAP exposure period prevents absolute eradication of biofilm and enhances the preservation of bacteria in stronger biofilm compartments.

Combating Actions of Green 2D-Materials on Gram Positive and Negative Bacteria and Enveloped Viruses

Interactions of novel bi-dimensional nanomaterials and live matter such as bacteria and viruses represent an extremely hot topic due to the unique properties of the innovative nanomaterials, capable in some cases to exhibit bactericide and antiviral actions. The interactions between bacteria and viruses and two dimensional nanosheets are here investigated. We extensively studied the interaction between a gram-negative bacterium, Escherichia coli, and a gram-positive bacterium, Staphylococcus aureus, with two different types of 2D nanoflakes such as MoS₂, belonging to the Transition Metal Dichalcogenides family, and Graphene Oxide. The same two types of nanomaterials were employed to study their antiviral action toward the Herpes simplex virus type-1, (HSV-1). The experimental results showed different bactericide impacts as well as different antiviral power between the two nanomaterials. The experimental findings were interpreted in bacteria on the base of the Derjaguin–Landau–Verwey–Overbeek theory. A simple kinetic model of bacterial growth in the presence of the interacting nanosheets is also elaborated, to explain the observed results. The experimental results in viruses are really novel and somewhat surprising, evidencing a stronger antiviral action of Graphene Oxide as compared to MoS₂. Results in viruses are complicated to quantitatively interpret due to the complexity of the system under study, constituted by virus/host cell and nanoflake, and due to the lack of a well assessed theoretical context to refer to. Thus, these results are interpreted in terms of qualitative arguments based on the chemical properties of the interactors in the given solvent medium.

Antimicrobial Photothermal Treatment of Pseudomonas Aeruginosa by a Carbon Nanoparticles-Polypyrrole Nanocomposite

BACKGROUND

Nowadays, it is needed to explore new routes to treat infectious bacterial pathogens due to prevalence of antibiotic-resistant bacteria. Antimicrobial photothermal therapy (PTT), as a new strategy, eradicates pathogenic bacteria.

OBJECTIVE

In this study, the antimicrobial effects of a carbon nanoparticles-polypyrrole nanocomposite (C-PPy) upon laser irradiation were investigated to destroy the pathogenic gram-negative Pseudomonas aeruginosa.

MATERIAL AND METHODS

In this experimental study, the bacterial cells were incubated with 50, 100 and 250 µg mL-1 concentrations of C-PPy and irradiated with a 808-nm laser at two power densities of 0.5 and 1.0 W cm-2. CFU numbers were counted for the irradiated cells, and compared to an untreated sample (kept in dark). To explore the antibacterial properties and mechanism(s) of C-PPy, temperature increment, reactive oxygen species formation, and protein and DNA leakages were evaluated. Field emission scanning electron microscopy was also employed to investigate morphological changes in the bacterial cell structures.

RESULTS

The results showed that following C-PPy attachment to the bacteria surface, irradiation of near-infrared light resulted in a significant decrement in the bacterial cell viability due to photothermal lysis. Slightly increase in protein leakage and significantly increase intracellular reactive oxygen species (ROS) were observed in the bacteria upon treating with C-PPy.

CONCLUSION

Photo-ablation strategy is a new minimally invasive and inexpensive method without overdose risk manner for combat with bacteria.

Photothermal inactivation of methicillin-resistant Staphylococcus aureus: anti-biofilm mediated by a polypyrrole-carbon nanocomposite

Widespread resistance to antibiotics amongst pathogens has become a tremendous challenge of high morbidity and mortality rates which increases the needs to exploring novel methods of treatment. An efficient antimicrobial procedure to root out pathogenic bacteria is photothermal therapy. In this study, antimicrobial effects of a polypyrrole-carbon nanocomposite (PPy-C) upon laser irradiation in order to destroy the pathogenic gram-positive bacterium, methicillin-resistant Staphylococcus aureus (MRSA) were assessed. The bacterial cells were incubated with 500, 750 and 1000 μg ml-1 concentrations of PPy-C and irradiated with an 808-nm laser at a power density of 1.0 W cm-2. To indicate the biocompatibility and toxic effect of the nanocomposite without and with laser irradiation, the authors counted the number of CFUs and compared it to an untreated sample. Antibacterial mechanisms of PPy-C were assessed through temperature increment, reactive oxygen species production, and protein and DNA leakages. Photothermal heating assay showed that 26°C temperature increases in the presence of 1000 µg ml-1 PPy-C led to >98% killing of MRSA. Furthermore, 20 min radiation of near-infrared light to PPy-C in different concentrations indicated destruction and reduction in the MRSA biofilm formation. Therefore, PPy-C was introduced as a photothermal absorber with a bactericidal effect in MRSA.

Paired methods to measure biofilm killing and removal: a case study with Penicillin G treatment of Staphylococcus aureus biofilm

Biofilms are microbial aggregates that show high tolerance to antibiotic treatments in vitro and in vivo. Killing and removal are both important in biofilm control, therefore methods that measure these two mechanisms were evaluated in a parallel experimental design. Kill was measured using the single tube method (ASTM method E2871) and removal was determined by video microscopy and image analysis using a new treatment flow cell. The advantage of the parallel test design is that both methods used biofilm covered coupons harvested from a CDC biofilm reactor, a well-established and standardized biofilm growth method. The control Staphylococcus aureus biofilms treated with growth medium increased by 0·6 logs during a 3-h contact time. Efficacy testing showed biofilms exposed to 400 μmol l^-1 penicillin G decreased by only 0·3 logs. Interestingly, time-lapse confocal scanning laser microscopy revealed that penicillin G treatment dispersed the biofilm despite being an ineffective killing agent. In addition, no biofilm removal was detected when assays were performed in 96-well plates. These results illustrate that biofilm behaviour and impact of treatments can vary substantially when assayed by different methods. Measuring both killing and removal with well-characterized methods will be crucial for the discovery of new anti-biofilm strategies.

SIGNIFICANCE AND IMPACT OF THE STUDY

Biofilms are tolerant to antimicrobial treatments and can lead to persistent infections. Finding new anti-biofilm strategies and understanding their mode-of-action is therefore of high importance. Historically, antimicrobial testing has focused on measuring the decrease in viability. While kill data are undeniably important, measuring biofilm disruption provides equally useful information. Starting with biofilm grown in the same reactor, we paired assessment of biofilm removal using a new treatment-flow-cell and real-time microscopy with kill data collected using the single tube method (ASTM E2871). Pairing these two methods revealed efficient biofilm removal properties of Penicillin G which were not detected during efficacy testing.

Wavelength-normalized spectroscopic analysis of Staphylococcus aureus and Pseudomonas aeruginosa growth rates

Optical density (OD) measurements are the standard approach used in microbiology for characterizing bacteria concentrations in culture media. OD is based on measuring the optical absorbance of a sample at a single wavelength, and any error will propagate through all calculations, leading to reproducibility issues. Here, we use the conventional OD technique to measure the growth rates of two different species of bacteria, Pseudomonas aeruginosa and Staphylococcus aureus. The same samples are also analyzed over the entire UV-Vis wavelength spectrum, allowing a distinctly different strategy for data analysis to be performed. Specifically, instead of only analyzing a single wavelength, a multi-wavelength normalization process is implemented. When the OD method is used, the detected signal does not follow the log growth curve. In contrast, the multi-wavelength normalization process minimizes the impact of bacteria byproducts and environmental noise on the signal, thereby accurately quantifying growth rates with high fidelity at low concentrations.

Anti-Pseudomonas aeruginosa IgY Antibodies Induce Specific Bacterial Aggregation and Internalization in Human Polymorphonuclear Neutrophils

Polymorphonuclear neutrophils (PMNs) are essential cellular constituents in the innate host response, and their recruitment to the lungs and subsequent ubiquitous phagocytosis controls primary respiratory infection. Cystic fibrosis pulmonary disease is characterized by progressive pulmonary decline governed by a persistent, exaggerated inflammatory response dominated by PMNs. The principal contributor is chronic Pseudomonas aeruginosa biofilm infection, which attracts and activates PMNs and thereby is responsible for the continuing inflammation. Strategies to prevent initial airway colonization with P. aeruginosa by augmenting the phagocytic competence of PMNs may postpone the deteriorating chronic biofilm infection. Anti-P. aeruginosa IgY antibodies significantly increase the PMN-mediated respiratory burst and subsequent bacterial killing of P. aeruginosa in vitro. The mode of action is attributed to IgY-facilitated formation of immobilized bacteria in aggregates, as visualized by fluorescence microscopy and the induction of increased bacterial hydrophobicity. Thus, the present study demonstrates that avian egg yolk immunoglobulins (IgY) targeting P. aeruginosa modify bacterial fitness, which enhances bacterial killing by PMN-mediated phagocytosis and thereby may facilitate a rapid bacterial clearance in airways of people with cystic fibrosis.

An integrated closed-tube 2-plex PCR amplification and hybridization assay with switchable lanthanide luminescence based spatial detection

Switchable lanthanide luminescence is a binary probe technology that inherently enables a high signal modulation in separation-free detection of DNA targets. A luminescent lanthanide complex is formed only when the two probes hybridize adjacently to their target DNA. We have now further adapted this technology for the first time in the integration of a 2-plex polymerase chain reaction (PCR) amplification and hybridization-based solid-phase detection of the amplification products of the Staphylococcus aureus gyrB gene and an internal amplification control (IAC). The assay was performed in a sealed polypropylene PCR chip containing a flat-bottom reaction chamber with two immobilized capture probe spots. The surface of the reaction chamber was functionalized with NHS-PEG-azide and alkyne-modified capture probes for each amplicon, labeled with a light harvesting antenna ligand, and covalently attached as spots to the azide-modified reaction chamber using a copper(i)-catalyzed azide-alkyne cycloaddition. Asymmetric duplex-PCR was then performed with no template, one template or both templates present and with a europium ion carrier chelate labeled probe for each amplicon in the reaction. After amplification europium fluorescence was measured by scanning the reaction chamber as a 10 × 10 raster with 0.6 mm resolution in time-resolved mode. With this assay we were able to co-amplify and detect the amplification products of the gyrB target from 100, 1000 and 10,000 copies of isolated S. aureus DNA together with the amplification products from the initial 5000 copies of the synthetic IAC template in the same sealed reaction chamber. The addition of 10,000 copies of isolated non-target Escherichia coli DNA in the same reaction with 5000 copies of the synthetic IAC template did not interfere with the amplification or detection of the IAC. The dynamic range of the assay for the synthetic S. aureus gyrB target was three orders of magnitude and the limit of detection of 8 pM was obtained. This proof-of-concept study shows that the switchable lanthanide luminescent probes enable separation-free array-based multiplexed detection of the amplification products in a closed-tube PCR which can enable a higher degree of multiplexing than is currently feasible by using different spectrally separated fluorescent probes.

Staphylococcal α-hemolysin is neurotoxic and causes lysis of brain cells in vivo and in vitro

Formation of a bacterial brain abscess entails loss of brain cells and formation of pus. The mechanisms behind the cell loss are not fully understood. Staphylococcus aureus, a common cause of brain abscesses, produces various exotoxins, including α-hemolysin, which is an important factor in brain abscess formation. α-Hemolysin may cause cytolysis by forming pores in the plasma membrane of various eukaryotic cells. However, whether α-hemolysin causes lysis of brain cells is not known. Nor is it known whether α-hemolysin in the brain causes cell death through pore formation or by acting as a chemoattractant, recruiting leukocytes and causing inflammation. Here we show that α-hemolysin injected into rat brain causes cell damage and edema formation within 30 min. Cell damage was accompanied by an increase in extracellular concentrations of zinc, GABA, glutamate, and other amino acids, indicating plasma membrane damage, but leukocytic infiltration was not seen 0.5-12h after α-hemolysin injection. This was in contrast to injection of S. aureus, which triggered extensive infiltration with neutrophils within 8h. In vitro, α-hemolysin caused concentration-dependent lysis of isolated nerve endings and cultured astrocytes. We conclude that α-hemolysin contributes to the cell death inherent in staphylococcal brain abscess formation as a pore-forming neurotoxin.

How and why cells grow as rods

The rod is a ubiquitous shape adopted by walled cells from diverse organisms ranging from bacteria to fungi to plants. Although rod-like shapes are found in cells of vastly different sizes and are constructed by diverse mechanisms, the geometric similarities among these shapes across kingdoms suggest that there are common evolutionary advantages, which may result from simple physical principles in combination with chemical and physiological constraints. Here, we review mechanisms of constructing rod-shaped cells and the bases of different biophysical models of morphogenesis, comparing and contrasting model organisms in different kingdoms. We then speculate on possible advantages of the rod shape, and suggest strategies for elucidating the relative importance of each of these advantages.

Staphylococcus aureus nasal isolates from healthy individuals cause highly variable host cell responses in vitro: the Tromsø Staph and Skin Study

Studies on Staphylococcus aureus populations colonizing the nasal cavity reveal that some bacterial strains are more common, while others are rarely found. This study included five isolates with the most common spa types and five isolates with rare spa types from healthy population. Selected phenotypic traits and genomic content among nasal S. aureus isolates were compared. Besides the rather similar growth rates, our data revealed a high diversity among isolates; that is, in biofilm formation, the ability to attach to and be internalized in keratinocytes as well as ability to induce pro- and anti-inflammatory cytokines. The results showed that S. aureus isolates from healthy hosts are phenotypically diverse and cause highly variable host cell responses. Therefore, generalizing the results from one S. aureus isolate to all is highly questionable.

Direct detection of bacterial genomic DNA at sub-femtomolar concentrations using single molecule arrays

We report a method for the sensitive measurement of genomic DNA based on the direct detection of single molecules of DNA in arrays of femtoliter wells. The method begins by generating short fragments of DNA from large, double-stranded molecules of genomic DNA using either restriction enzymes or sonication. Single-stranded fragments are then generated by melting the duplex, and these fragments are hybridized to complementary biotinylated detection probes and capture probes on paramagnetic beads. The resulting DNA complexes are then labeled with an enzyme (streptavidin-β-galactosidase), and single enzymes associated with these complexes on beads are detected in single molecule arrays (Simoa). DNA concentration is quantified by determining the average number of enzymes per bead via Poisson statistics (digital) or the average bead intensity (analog). The Simoa DNA assay was used to detect genomic DNA purified from S. aureus with an average limit of detection (LOD) of 0.07 fM, or 2100 DNA molecules per 50 μL sample. We used this assay to detect S. aureus spiked into (a) whole blood, with an average LOD of 1100 bacteria per 25 μL sample (0.074 fM), and (b) water from the Charles River, with an LOD of 1300 bacteria per 50 μL sample (0.042 fM). Bacteria were detected in river water without prior purification of DNA. The Simoa DNA assay, which directly detects target DNA molecules without molecular replication, is an attractive alternative to existing sensitive DNA detection technologies that rely on amplification using polymerases, such as the polymerase chain reaction (PCR).

A sample extraction method for faster, more sensitive PCR-based detection of pathogens in blood culture

Three mechanistically different sample extraction methodologies, namely, silica spin columns, phenol-chloroform, and an automated magnetic capture of polymer-complexed DNA (via an Automate Express instrument), were compared for their abilities to purify nucleic acids from blood culture fluids for use in TaqMan assays for detection of Staphylococcus aureus. The extracts from silica columns required 100- to 1000-fold dilutions to sufficiently reduce the powerful PCR inhibitory effects of the anticoagulant sodium polyanetholsulfonate, a common additive in blood culture media. In contrast, samples extracted by either phenol-chloroform or the Automate Express instrument required little or no dilution, respectively, allowing for an approximate 100-fold improvement in assay sensitivity. Analysis of 60 blood culture bottles indicated that these latter two methodologies could be used to detect lower numbers of pathogens and that a growing S. aureus culture could be detected 2 hours earlier than when using silica columns. Of the three tested methodologies, the Automate Express instrument had the shortest time to result, requiring only approximately 80 minutes to process 12 samples. These findings highlight the importance of considering the mechanism when selecting a DNA extraction methodology, given that certain PCR inhibitors act in a similar fashion to DNA in certain chemical environments, resulting in copurification, whereas other methodologies use different chemistries that have advantages during the DNA purification of certain types of samples.

The effect of the chemical, biological, and physical environment on quorum sensing in structured microbial communities

As researchers attempt to study quorum sensing in relevant clinical or environmental settings, it is apparent that many factors have the potential to affect signaling. These factors span a range of physical, chemical, and biological variables that can impact signal production, stability and distribution. Optimizing experimental systems to natural or clinical environments may be crucial for defining when and where quorum sensing occurs. These points are illustrated in our case study of S. aureus signaling in biofilms, where signal stability may be affected by the host environment. The basic signaling schemes have been worked out at the molecular level for a few of the major quorum-sensing systems. As these studies continue to refine our understanding of these mechanisms, an emerging challenge is to identify if and when the local environment can affect signaling.

Antigen recognition by rainbow trout (Oncorhynchus mykiss) of whole cell proteins expressed by Lactococcus garvieae when obtained directly from fish and under iron limited culture conditions

Infection by Lactococcus garvieae has become a widely recognised problem associated with intensively cultured fish. Long-term control of fish infections may be possible by vaccination providing a suitable and efficacious epitope is expressed during production of cells used for vaccine preparation. The identification of novel vaccine candidates must, therefore, consider how the host species recognises and responds to bacterial cell components. L. garvieae was cultured in iron deficient, limited and haem iron enriched media and the whole cell proteins expressed under these conditions were compared with those expressed in bacteria extracted with Percoll gradients directly from spleen tissue of infected rainbow trout (Oncorhynchus mykiss). SDS-PAGE of the cell proteins showed the existence of several different electropherotypes according to the iron status of the culture media. Only minor differences in cell protein profile were detected in bacteria obtained directly from fish spleens, but when the electropherograms were analysed by Western blots using L. garvieae hyperimmune fish sera, several proteins could be identified that were expressed only when L. garvieae was growing in vivo. Siderophore could be detected in culture supernatant of iron deficient, limited and haem iron enriched media but not in media with higher nutrient concentrations. The siderophore could not be identified as a type of catechol or hydroxymate. Rainbow trout recognise proteins in the range of approximately 50-80 kDa for bacterial cells obtained without subculture from infected fish and culture conditions can influence protein profiles for this pathogen.