Formation of cross-fractures in cellulose microfibril structure by an endoglucanase-cellobiohydrolase complex from Trichoderma reesei

An aggregated understanding of cellulase adsorption and hydrolysis for ball-milled cellulose

This study evaluated the effects of physicochemical properties of a series of ball-milled cellulose on cellulase adsorption and glucose yield. The relationship between cellulase adsorption and initial hydrolysis rate was also discussed. We found that hydrophobicity and surface charge are the key factors affecting cellulase adsorption on ball-milled cellulose. The results demonstrated that glucose yield had a positive correlation with specific surface area, while showed a negative correlation with particle size, degree of polymerization and crystallinity. Among these properties, specific surface area and crystallinity are the key factors affecting glucose yield. As ball milling progressed, cellulose showed lower enzyme adsorption capacity/amount of bound enzyme during initial stage of hydrolysis, but had higher initial hydrolysis rate. The enhanced rate is attributed to the fact that the amorphous region produced by ball milling reduces the free energy required for decrystallization thus increases the catalytic efficiency of the bound enzyme.

Fungal enzyme sets for plant polysaccharide degradation

Enzymatic degradation of plant polysaccharides has many industrial applications, such as within the paper, food, and feed industry and for sustainable production of fuels and chemicals. Cellulose, hemicelluloses, and pectins are the main components of plant cell wall polysaccharides. These polysaccharides are often tightly packed, contain many different sugar residues, and are branched with a diversity of structures. To enable efficient degradation of these polysaccharides, fungi produce an extensive set of carbohydrate-active enzymes. The variety of the enzyme set differs between fungi and often corresponds to the requirements of its habitat. Carbohydrate-active enzymes can be organized in different families based on the amino acid sequence of the structurally related catalytic modules. Fungal enzymes involved in plant polysaccharide degradation are assigned to at least 35 glycoside hydrolase families, three carbohydrate esterase families and six polysaccharide lyase families. This mini-review will discuss the enzymes needed for complete degradation of plant polysaccharides and will give an overview of the latest developments concerning fungal carbohydrate-active enzymes and their corresponding families.

WallGen, software to construct layered cellulose-hemicellulose networks and predict their small deformation mechanics

We understand few details about how the arrangement and interactions of cell wall polymers produce the mechanical properties of primary cell walls. Consequently, we cannot quantitatively assess if proposed wall structures are mechanically reasonable or assess the effectiveness of proposed mechanisms to change mechanical properties. As a step to remedying this, we developed WallGen, a Fortran program (available on request) building virtual cellulose-hemicellulose networks by stochastic self-assembly whose mechanical properties can be predicted by finite element analysis. The thousands of mechanical elements in the virtual wall are intended to have one-to-one spatial and mechanical correspondence with their real wall counterparts of cellulose microfibrils and hemicellulose chains. User-defined inputs set the properties of the two polymer types (elastic moduli, dimensions of microfibrils and hemicellulose chains, hemicellulose molecular weight) and their population properties (microfibril alignment and volume fraction, polymer weight percentages in the network). This allows exploration of the mechanical consequences of variations in nanostructure that might occur in vivo and provides estimates of how uncertainties regarding certain inputs will affect WallGen's mechanical predictions. We summarize WallGen's operation and the choice of values for user-defined inputs and show that predicted values for the elastic moduli of multinet walls subject to small displacements overlap measured values. "Design of experiment" methods provide systematic exploration of how changed input values affect mechanical properties and suggest that changing microfibril orientation and/or the number of hemicellulose cross-bridges could change wall mechanical anisotropy.

Changes in the structural properties and rate of hydrolysis of cotton fibers during extended enzymatic hydrolysis

An extended enzymatic hydrolysis of cotton fibers by crude cellulase from Trichoderma pseudokoningii S-38 is described with characterization of both the enzyme changes of activities and cellulose structure. The hydrolysis rates declined drastically during the early stage and then slowly and steadily throughout the whole hydrolysis process the same trend could be seen during the following re-hydrolysis process. Morphological and structural changes to the fibers, such as swelling, frequent surface erosion, and variation in the packing and orientation of microfibrils, were investigated by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Observation of X-ray diffraction and IR spectra suggests that the hydrolysis process results in a gradual increase in the relative intensity of the hydrogen bond network, and a gradual decrease in the apparent crystal size of cellulose. The I(alpha) crystal phase was hydrolyzed more easily than was the I(beta) crystal phase. Apart from the inactivation of CBHs activity, changes in the packing and arrangement of microfibrils and the structural heterogeneity of cellulose during hydrolysis could be responsible for the reduction in the rate of reaction, especially in its later stages. The results indicate that the enzymatic hydrolysis of cellulose occurs on the outer layer of the fiber surface and that, following this, the process continues in a sub-layer manner.

Toward an aggregated understanding of enzymatic hydrolysis of cellulose: noncomplexed cellulase systems

Information pertaining to enzymatic hydrolysis of cellulose by noncomplexed cellulase enzyme systems is reviewed with a particular emphasis on development of aggregated understanding incorporating substrate features in addition to concentration and multiple cellulase components. Topics considered include properties of cellulose, adsorption, cellulose hydrolysis, and quantitative models. A classification scheme is proposed for quantitative models for enzymatic hydrolysis of cellulose based on the number of solubilizing activities and substrate state variables included. We suggest that it is timely to revisit and reinvigorate functional modeling of cellulose hydrolysis, and that this would be highly beneficial if not necessary in order to bring to bear the large volume of information available on cellulase components on the primary applications that motivate interest in the subject.

Low-tech electrophoresis, small but beautiful, and effective: electrophoretic titration curves of proteins

Migration across a stationary pH gradient results in the electrophoretic titration of a protein's dissociable groups. From the resulting curves, some properties of the protein may be derived, including overall amino acid composition and type of mutation between polymorphic variants, as well as range of stability or, for enzymes, of catalytic activity. Analysis with this technique is a stringent purity criterion; other applications allow the study of interacting systems and the planning of chromatographic fractionations based on differences in surface charge.

The biological degradation of cellulose

Cellulolytic microorganisms play an important role in the biosphere by recycling cellulose, the most abundant carbohydrate produced by plants. Cellulose is a simple polymer, but it forms insoluble, crystalline microfibrils, which are highly resistant to enzymatic hydrolysis. All organisms known to degrade cellulose efficiently produce a battery of enzymes with different specificities, which act together in synergism. The study of cellulolytic enzymes at the molecular level has revealed some of the features that contribute to their activity. In spite of a considerable diversity, sequence comparisons show that the catalytic cores of cellulases belong to a restricted number of families. Within each family, available data suggest that the various enzymes share a common folding pattern, the same catalytic residues, and the same reaction mechanism, i.e. either single substitution with inversion of configuration or double substitution resulting in retention of the beta-configuration at the anomeric carbon. An increasing number of three-dimensional structures is becoming available for cellulases and xylanases belonging to different families, which will provide paradigms for molecular modeling of related enzymes. In addition to catalytic domains, many cellulolytic enzymes contain domains not involved in catalysis, but participating in substrate binding, multi-enzyme complex formation, or possibly attachment to the cell surface. Presumably, these domains assist in the degradation of crystalline cellulose by preventing the enzymes from being washed off from the surface of the substrate, by focusing hydrolysis on restricted areas in which the substrate is synergistically destabilized by multiple cutting events, and by facilitating recovery of the soluble degradation products by the cellulolytic organism. In most cellulolytic organisms, cellulase synthesis is repressed in the presence of easily metabolized, soluble carbon sources and induced in the presence of cellulose. Induction of cellulases appears to be effected by soluble products generated from cellulose by cellulolytic enzymes synthesized constitutively at a low level. These products are presumably converted into true inducers by transglycosylation reactions. Several applications of cellulases or hemicellulases are being developed for textile, food, and paper pulp processing. These applications are based on the modification of cellulose and hemicellulose by partial hydrolysis. Total hydrolysis of cellulose into glucose, which could be fermented into ethanol, isopropanol or butanol, is not yet economically feasible. However, the need to reduce emissions of greenhouse gases provides an added incentive for the development of processes generating fuels from cellulose, a major renewable carbon source.