Comparison of survival and complication rates of tooth-supported fixed dental prostheses (FDPs) and implant-supported FDPs and single crowns (SCs)

An overview of artificial intelligence based applications for assisting digital data acquisition and implant planning procedures

OBJECTIVES

To provide an overview of the current artificial intelligence (AI) based applications for assisting digital data acquisition and implant planning procedures.

OVERVIEW

A review of the main AI-based applications integrated into digital data acquisitions technologies (facial scanners (FS), intraoral scanners (IOSs), cone beam computed tomography (CBCT) devices, and jaw trackers) and computer-aided static implant planning programs are provided.

CONCLUSIONS

The main AI-based application integrated in some FS's programs involves the automatic alignment of facial and intraoral scans for virtual patient integration. The AI-based applications integrated into IOSs programs include scan cleaning, assist scanning, and automatic alignment between the implant scan body with its corresponding CAD object while scanning. The more frequently AI-based applications integrated into the programs of CBCT units involve positioning assistant, noise and artifacts reduction, structures identification and segmentation, airway analysis, and alignment of facial, intraoral, and CBCT scans. Some computer-aided static implant planning programs include patient's digital files, identification, labeling, and segmentation of anatomical structures, mandibular nerve tracing, automatic implant placement, and surgical implant guide design.

Mechanical effect of taper position in abutment hole and screw taper angles on implant system and peri-implant tissue: a finite element analysis

PURPOSE

The study aimed to investigate the mechanical effects of the taper position in the abutment hole and the screw taper angles on the implant system and peri-implant tissue using finite element analysis.

METHODS

Four taper positions (L1, L2, L3, L4) in the abutment hole were established using 3D software and five screw taper angles (30°, 60°, 90°, 120°, 180°) were set.

RESULT

Taper position significantly affects the stresses in the implant system. The 30° and 180° angles (L4 position) showed less stress than other angles.

CONCLUSION

Elevated taper position and reasonable taper angle are beneficial in reducing the stress in the implant system.

Evaluating the clinical behavior of veneered zirconia in comparison with monolithic zirconia complete arch implant-supported prostheses: A systematic review and meta-analysis

STATEMENT OF PROBLEM

Because the use of zirconia in dentistry is relatively new, the number of published studies on the subject is scarce, even though material selection is an important factor in clinical performance. Therefore, a systematic assessment of the impact of the prosthetic material, framework design, veneering material, and manufacturing process is required.

PURPOSE

The purpose of this systematic review and meta-analysis was to investigate the survival and success rates of feldspathic porcelain veneered zirconia (VZir) in comparison with monolithic zirconia (MZir) complete arch implant-supported prostheses (CAISPs). A secondary objective was to assess the influence of the type of loading, the presence or absence of a cantilever, the type of zirconia used, the location, and the opposing arch on complications rates and patient satisfaction.

MATERIAL AND METHODS

An electronic search of the MEDLINE database (via PubMed), Scopus, Science Direct, Cochrane Library, and OpenGrey was carried out. The criteria described in the preferred reporting items for systematic reviews and meta-analyses statement were used. The search was restricted from January 2000 to January 2022.

RESULTS

The systematic search resulted in 20 articles that met the established criteria. In total, 751 patients (VZir=302; MZir=449) with 3038 CAISPs (VZir=368; MZir=2670) were analyzed. Higher prosthetic survival and success rates were found in MZir compared with VZir CAISPs (100% and 95.45%, respectively). The meta-analysis found significantly fewer complications related to MZir (9.4% [4.8%-14.1%]) compared with VZir (33.7% [17.5%-49.9%]).

CONCLUSIONS

Based on the findings of this systematic review, MZir CAISPs had higher survival and success rates than VZir CAISPs, with significantly fewer prosthetic complications. The influence of factors such as the type of functional loading, the presence of a cantilever, the material used in the prosthodontic workflow, the location of the CAISP, and the type of antagonist arch on the performance of Zir CAISPs remains unclear.

Clinical outcomes of single implant supported crowns utilising the titanium base abutment: A 7.5-year prospective cohort study

OBJECTIVE

To assess radiographic, clinical and patient-reported outcomes of single zirconia implant-supported crowns on titanium base abutments (TBA) over a 7.5-year period.

METHODS

Twenty-four patients received bone-level titanium implants and screw-retained zirconia implant crowns utilising TBA. Marginal bone level (MBL), clinical parameters (probing depth-PD, bleeding on probing-BoP, plaque control record-PCR), technical complications (USPHS criteria) and patient satisfaction were assessed at crown delivery (baseline), 1 year (FU-1) and at 7.5 years (FU-7.5) of follow-up.

RESULTS

Eighteen patients were available for re-examination at 7.5 years. The mean MBL at FU-7.5 (0.35 ± 0.20mm) did not significantly change compared to baseline (0.54 ± 0.39, p=.352) and to FU-1 (0.54 ± 0.45mm, p=0.524). From baseline to 7.5 years, the mean PD increased significantly, from 3.0 ± 0.6mm to 3.7 ± 0.8mm (p=0.005). However, BoP and PCR did not significantly change; (BOP: from 27.1 ± 20.7% to 25.0 ± 20.0%, p=0.498; PCR: from 11.1 ± 21.2% to 25.0 ± 25.1%, p=0.100). Nine patients presented with more than one bleeding site. This denoted a peri-implant mucositis prevalence of 50%, whilst none of the implants presented peri-implantitis. One incidence of minor and major ceramic chipping were reported on 2 out of the 18 crowns, resulting in a prosthetic survival rate of 94.4%. Seventeen patients were highly satisfied with their result.

CONCLUSION

Single implant-supported zirconia crowns on TBA displayed: (i) minor number of technical complications, (ii) high prosthetic survival rate, (iii) stable marginal bone level and (iv) high patient satisfaction at 7.5 years.

CLINICAL IMPLICATIONS

Titanium base abutments despite their high use in clinical practice, lacked medium- and long-term studies. The presented findings highlight their clinical performance at 7.5 years as they display satisfying radiographic, clinical and patient-related outcomes. TBA appear to be a suitable abutment choice for medium-term implant-supported restorations.

Are we crossing a line with extensive dental implant treatments? The problem of overtreatment and potential solutions

In this opinion article, the problem of overtreatment is discussed, and some examples of potential overtreatment with dental implants are presented. The concept of GRADE (Grading of Recommendations Assessment, Development, and Evaluation) is also presented as a system to help clinicians (and patients) make the most appropriate decisions about treatments with dental implants. In this concept, elements other than the quality of evidence are weighed, such as the balance between benefits and harm, and between a patient's values and good use of resources, to make an appropriate clinical decision. GRADE can be tailored/modified and then used by both clinicians and patients to reduce cases of overtreatment with dental implants.

Evaluation of the Dislodgement Resistance of Traditional Adhesive Posterior Bridges Compared With Adhesive Posterior Bridges Prepared With Standard and Modified Slot-Back Dummies: An In Vitro Study

Background Bridges with minimal preparation have received great acceptance in recent years. Since their first appearance, they have undergone many types of modifications and improvements. Aim This study aimed to compare three types of minimal preparation bridges in terms of force required for dislodgement and the type of deformation incurred for each of the abutments and prostheses. Materials and methods The research sample consisted of 36 adhesive bridges divided into three equal groups. The first group contained traditional adhesive bridges prepared from the proximal and lingual surfaces with a thickness of 1 mm, the second group contained adhesive bridges with standard slot-back dummies, and the third group contained adhesive bridges with modified slot-back dummies. Each bridge underwent a pressure test, which was directed from the buccal toward the lingual side and was inclined to the horizontal plane at an angle of 45°. A one-way analysis of variance (ANOVA) test was conducted with a significance level of 0.05. Results The average dislodgement resistance value in the traditional adhesive bridges group was 480,858 N, with no statistically significant difference from the standard slot-back dummy group (p = 1), for which the average dislodgement resistance value was 486,050 N. The average dislodgement resistance value in the modified slot-back dummy group was 746,733 N, with a statistically significant difference compared with other study groups (p < 0.05). Conclusion The adhesive bridge with the modified slot-back dummy showed higher dislodgement resistance compared to the traditional adhesive bridge and the adhesive bridge with the slot-back dummy.

Failure and complication rates of different materials, designs, and bonding techniques of ceramic cantilever resin-bonded fixed dental prostheses for restoring missing anterior teeth: A systematic review and meta-analysis

OBJECTIVES

The objective of this review was to assess clinical trials that have examined the materials, design, and bonding of ceramic cantilevered resin-bonded fixed dental prostheses (RBFDPs) as a potential option for replacing missing anterior teeth. The evaluation primarily focuses on the rate of restoration failure and clinical complications.

MATERIALS AND METHODS

A thorough search of databases including PubMed/MEDLINE, Scopus, and the Cochrane Library, was conducted. The most recent search was performed in October 2023. Clinical studies that compared ceramic cantilevered RBFDPs with double retainers or cantilevered RBFDPs using different ceramic materials or bonding systems were included. The outcome measures considered were restoration failure and complication rates.

RESULTS

Twelve studies met the eligibility criteria. The pooled data showed a statistically significant decrease in complication events when using cantilever designs compared with double retainer designs (p < 0.05); however, there were no differences found between the two designs in terms of restoration failure. The complication and failure rate of cantilever RBFDPs did not show a statistically significant difference with or without ceramic primer application before luting with phosphate monomer-containing luting resin (p > 0.05).

CONCLUSIONS

Ceramic cantilevered RBFDPs have lower complication rates compared with those with double retainers. The use of a ceramic primer prior to luting composite resin for ceramic cantilevered RBFDPs decreases the occurrence of complications and failures, although this effect was not statistically significant. Additional research is required to confirm these findings. Glass ceramic cantilever RBFDPs showed a decrease in success after 6 years, requiring ongoing monitoring, but both zirconia and glass-infiltrated alumina cantilever RBFDPs have demonstrated durability with excellent long-term success and survival rates for up to 10 and 15 years.

CLINICAL SIGNIFICANCE

Cantilever ceramic RBFDPs in the anterior region are a less invasive and valuable treatment option, providing good esthetic results.

The Effect of Prosthetic Factors on the Long-Term Survival of Dental Implants: A Narrative Review

The success of implants depends on the biological and mechanical factors of the implant, as well as on the chosen prosthesis, which has different characteristics that can affect the survival of the implant and its marginal bone levels. Therefore, when choosing the type of prosthesis, it is necessary to understand and consider each of these variables and tailor them to the relevant clinical situation. In this narrative review, we will assess the types of prostheses, their different characteristics, timing, and their impact on implant survival and marginal bone levels, as accepted in today's literature.

Dentolegal aspects of dental implants

Dentists providing implant dental treatment need to fully appreciate the legal and clinical issues that are relevant to implant dentistry. The legal aspects of implant dentistry, according to UK law, are described in this article. Suggestions for how the risks of implant treatment might be mitigated, with tips and examples are provided.

Restoration-oriented anatomical analysis of alveolar bone at mandibular first molars and implications for immediate implant placement surgery: a CBCT study

PURPOSE

This cone-beam computed tomography (CBCT) study aimed to analyze the anatomical characteristics of alveolar bone at mandibular first molar (MFM) and their implications for immediate implant placement surgery.

MATERIALS AND METHODS

100 patients with 140 MFMs were reviewed retrospectively. We first performed a 3D reconstruction of the patient's CBCT data to determine a reference plane with ideal implant placement and orientation. The following parameters of MFM region were analyzed: mesial-distal socket size (MD-SS), buccal-lingual socket size (BL-SS), root furcation fornix to inferior alveolar nerve (IAN) distance (RF-I), interradicular bone thickness (IRB), mesial/distal root apex to the IAN distance (MRA-I/DRA-I), thickness of the buccal/lingual bone of the mesial root (MR-B/MR-L), thickness of the buccal/lingual bone of the distal root (DR-B/DR-L).

RESULTS

The MD-SS of MFM was 8.74 ± 0.76 mm, and the BL-SS was 8.26 ± 0.72 mm. The MR-B, DR-B was 1.01 ± 0.40 mm and 1.14 ± 0.50 mm, and the difference was statistically significant (P = .001). The values of the MR-L, DR-L were 2.71 ± 0.78 mm and 3.09 ± 0.73 mm, and the difference was also statistically significant (P < .001). The mean distance of RF-I was 15.68 ± 2.13 mm, and the MRA-I was 7.06 ± 2.22 mm, which was greater than that of DRA-I (6.48 ± 2.30 mm, P < .001). The IRB at 2 mm, 4 mm apical from the furcation fornix, and at apex level was 2.81 ± 0.50 mm, 3.30 ± 0.62 mm, and 4.44 ± 1.02 mm, respectively.

CONCLUSION

There is relatively sufficient bone mass in interradicular bone in height, but an adequate width is lacking for the bone between the mesial and distal root after the extraction of the MFM for immediate implantation. The thickness of the MFM buccal bone is relative thin, especially for the mesial root.

Occlusal Changes Following Single Dental Implant Placement in the Posterior Region of Jaws: A Systematic Review and Meta-Analysis

Inserting a single implant in the posterior region is one of the most common procedures for replacing a missing posterior tooth. However, the impact of implant location on bite force distribution and occlusal forces remains unclear. To investigate the occlusal changes following single-implant crown placements in the posterior region, a systematic review and meta-analysis was conducted. A comprehensive search was performed across seven databases using Boolean operators and MeSH keywords. The study adhered to Preferred Reporting Items for Systematic reviews and Meta-Analyses (PRISMA) guidelines to ensure transparency and minimize bias. Six studies met the inclusion criteria. The meta-analysis revealed that single-implant crown placements significantly alter the distribution of bite and occlusal forces over time. The mean differences (MDs) in relative occlusal forces (ROF, μm) between implants and controls at two weeks, three months, six months, 12 months, 24 months, and 36 months were -6.31 μm, -1.53 μm, -2.09 μm, -0.10 μm, 2.91 μm, and 7.01 μm, respectively. The overall effect of the meta-analysis was -0.71 μm, although this was not statistically significant (P = 0.54). Subgroup analysis showed considerable heterogeneity between different time periods (P < 0.00001, I² = 89.8%). Additionally, a significant increase in the distribution of bite force (N) was observed post-implantation, with an MD of 1.00 N (0.86, 1.15) and high statistical significance (P < 0.00001). These findings indicate that single-implant crown placement in the posterior region leads to significant shifts in the distribution of both biting forces (N) and ROF (μm) over time.

The survival and clinical performance of anterior composite resin restorations and posterior indirect and cast restorations used to treat generalised tooth wear

Objective To evaluate the survival and clinical performance of restorative materials used in the rehabilitation of generalised severe tooth wear within a UK NHS postgraduate teaching hospital.Methods The clinical performance of 527 restorations on 20 patients with generalised severe tooth wear was reviewed after a mean period of five years. Anterior teeth were restored with direct composite resin and posterior teeth with indirect restorations. The study used the modified United States Public Health Service criteria for restoration assessment. Survival of the restorations was analysed using Kaplan-Meier survival curves, the log-rank test and the Cox proportional hazards regression analysis.Results The sample included 20 participants: 13 men and 7 women, with a median age of 51.8 years (range: 33-73 years). The median survival time for all restorations was 11.3 years when major failures were considered and 5.9 years for restorations when all types of failure were considered. A median survival time of 5.9 years for composite resin restorations and over seven years for cast restorations was found when considering all failures. Composite resin restorations commonly failed as a result of fracture, wear and marginal discolouration. Factors significantly influencing restoration survival were the material used, aetiology, incisal relationship and tooth location. The biological complications associated with this treatment regime were rare. Patient satisfaction remained generally high, with greatest dissatisfaction related to treatment time.Conclusions The use of anterior composite resin with posterior indirect restorations to treat generalised severe tooth wear is a viable treatment modality with very few major complications.

In vitro study to analyze reverse torque values of attachment screws with multiple loosening/tightening preload cycles

PURPOSE

To determine the number of torque/reverse torque cycles attachment screws can withstand before fracture, and to record the magnitude of reverse torque values for each of the 10 cycles of screw tightening and loosening.

MATERIALS AND METHODS

The testing assemblies consisted of 30 temporary cylinder/multiunit abutment/internal connection implants (10 each from Dentsply Sirona Astra, Biohorizons, and Zimmer Biomet Dental). The assemblies were inserted into resin blocks, and temporary cylinders were connected to the multiunit abutments with new attachment screws and torqued to the recommended preload (15 Ncm Dentsply Sirona Astra; 15 Ncm Biohorizons; 10 Ncm Zimmer Biomet Dental) using a digital torque gauge instrument (Model 3, MARK-10 Corporation, New York, USA) at room temperature without lubrication. After 24 h, the attachment screws were reverse torqued with the same instrument and the values were recorded. The torque/reverse torque cycles were repeated every 24 h for 10 days. Data were analyzed using mixed model analysis. A second test included torquing the used screws (30) until fracture or stripping occurred. The reverse torque values were recorded and compared with new screws that were torqued until fracture or stripping. A sample of used and new attachment screws from each assembly were viewed under both laser microscope (LEXT OLS4000, 3D Measuring Laser Microscope, Olympus) and scanning electron microscope (JEOL-JSM6510, Tokyo, Japan). Data were analyzed using t-test.

RESULTS

Following 10 cycles of torquing and reverse torquing, the reverse torque values measured on day 10 were lesser compared with the reverse torque value measured on day 1 for 29/30 attachment screws (96.6%). According to the t-test used for the second test, the p-values among all three groups were ≥0.9 which were not statistically significant.

CONCLUSION

The results of this study indicated that after 10 cycles of torquing and reverse torquing attachment screws, the reverse torque values decreased. There were no statistical differences between the magnitude of torque necessary to fracture new and used attachment screws.

Cost-Effectiveness Analysis of Implant-Supported Single Crown and Tooth-Supported Fixed Dental Prostheses in Türkiye

OBJECTIVES

The most cost-effective option for replacing lost teeth is not evident because there is a dearth of evidence-based information on implant-supported single crowns versus tooth-supported fixed dental prostheses. This study conducted the analysis of cost-effectiveness of implant-supported single crown and tooth-supported fixed dental prostheses from a social perspective in Türkiye.

METHODS

Costs were calculated in the analysis from a social perspective for 2021. Costs and quality-adjusted prosthesis year (QAPY) values were computed over a 20-year period in the study using the Markov model. The computed values were discounted by 5%. The results are presented as the incremental cost-effectiveness ratio. To assess the impact of uncertainty on cost-effectiveness analyses, a tornado diagram and Monte Carlo simulations were created.

RESULTS

Throughout the 20-year time horizon, tooth-supported fixed dental prostheses cost $985.58 cumulatively, whereas implant-supported single crown cost $2161.64 (US $1 = 9.22 ₺ as of 15 October 2021). The calculated incremental cost-effectiveness ratio is 1.333 per QAPY. Compared with the implant-supported single crown tooth-supported fixed dental prostheses, it offers a QAPY of 0.882 over a 20-year period, while costing an additional $1176.06.

CONCLUSIONS

These results suggest that the implant-supported single crown provided higher QAPY value but was costlier. When the research's findings are compared with the literature, it becomes clear that Türkiye has lower dental care expenses than most other nations.

Marginal fit and retention force of zirconia resin-bonded fixed dental prostheses in the posterior region with different designs

Background/purpose

Retainer debonding of resin-bonded fixed dental prostheses (RBFDPs) is one of the major reasons for their lower survival rates than fixed dental prostheses (FDPs) with full-coverage crowns. Recent advances in milling technology have enabled the fabrication of RBFDPs with complex retainers (D-shaped designs). This study aimed to assess the marginal fit and retention force of zirconia RBFDPs with inlay-, L-, and D-shaped designs to clarify their clinical applications.

Materials and methods

Three abutment teeth models without maxillary second premolars were created using inlay-, L-, and D-shaped retainer designs. The zirconia RBFDPs were designed and fabricated according to the manufacturer's instructions (n = 10). The marginal gap was measured using the silicone replica technique. Zirconia frameworks were bonded to the abutment teeth using resin cement. Tensile test was conducted after thermal cycling and dynamic loading tests. The loads during debonding or fracture were recorded. The failure pattern was analyzed by observing the fracture surface using a scanning electron microscope.

Results

D-shaped RBFDPs showed a significantly larger marginal gap than inlay- and L-shaped RBFDPs (P < 0.05). However, the mean marginal values were clinically acceptable (<120 μm). The D-shaped model exhibited the highest tensile strength in the tensile tests. The inlay-shaped and most of the D-shaped RBFDPs experienced debonding with cohesive failure, whereas the L-shaped RBFDPs showed fractures near the connector.

Conclusion

The D-shaped retainer design was superior to the inlay- and L-shaped designs with respect to the inhibition of retainer debonding. However, the marginal fitness needs to be improved.

Occlusal changes on implant-supported single crowns with one year follow-up after loading: A systematic review and meta-analysis

OBJECTIVE

This systematic review evaluated the occlusal changes after loading with implant-supported single crowns.

SOURCES

An electronic literature search was conducted in PubMed, Embase and Cochrane library for randomized (RCTs) or non-randomized controlled clinical trials (CCTs), with a minimum of 10 patients.

STUDY SELECTION

Studies reporting the occlusal force changes on implant-supported single crowns - with natural teeth as antagonist - measured at baseline and after loading periods were included. 4 CCTs including 133 ISCs in posterior sites were included for meta-analysis. All analyzed ISCs had no contact at a light bite and a light contact at a heavy bite in MIP at loading (baseline).

DATA

The relative occlusal forces (ROFs) of each implant-supported single crown (ISC) or control tooth (CT) were extracted. ROFs were defined as percentage of the total occlusal force of the entire dentition at maximum intercuspal position (MIP). A meta-analysis was conducted to compare the ROF changes at different follow-up periods and the weighted mean differences in ROF between ISCs and CTs were pooled and analyzed. The amount of change in ROF was significantly lower in 6 to 12 months after loading comparing the follow-up period between baseline and 6 month (p < 0.05). At baseline and 3-month follow-up, CTs presented significant higher ROF than ISCs (p < 0.05), while no significant difference was found after half year following.

CONCLUSIONS

This study showed that the ROF changes significantly over time after loading of ISCs. It might prove that the occlusal concept defined at the time of prosthetic delivery changes or adapts naturally over time.

CLINICAL SIGNIFICANCE

The function of specific implant occlusal concept (no contact at a light bite and a light contact at a heavy bite in MIP) is limited over time and careful monitoring and occlusal adjustments should be recommendable during the first-year follow-up.

In vitro evaluation of surface roughness of titanium abutments after air polishing with different abrasive powders

OBJECTIVES

The purpose of this study was to evaluate the effects of air polishing with sodium bicarbonate and erythritol powders on surface roughness and morphological changes in titanium abutments.

METHODS

A total of 45 grade V titanium discs were divided in three groups: Group A (Control) air polished with air/water; Group B, air polished with sodium bicarbonate powder; and Group C, air polished with erythritol powder. After air polishing, the samples' roughness (Sa) in micrometres were analysed with an optical profilometer. The samples' surface morphology study was conducted via scanning electronic microscope (SEM). Data were described using mean and standard deviation of roughness values (Sa). Inferential analysis was performed using the ANOVA multiple comparison test followed by Tukey's post hoc test. Both tests used a 5% level of significance.

RESULTS

After air polishing, average roughness of group A, B and C were 0.036, 0.046 and 0.037 μm, respectively, with statistically significant differences between groups A and B (p < 0.05). No statistically significant differences were found between group A and group C, as well as between group B and C (p > 0.05). As for the morphology analysis, damages to the titanium surface were only observed in group B.

CONCLUSIONS

The study indicates that air polishing with erythritol powder maintains titanium abutment integrity better than sodium bicarbonate, which increased surface roughness and caused damage. Erythritol is preferable for minimizing surface alterations and maintaining morphological stability.

Eleven- to fifteen-year outcome for two-piece implants with an internal tube-in-tube connection: a cross-sectional analysis of 245 implants

PURPOSE

The aim of this retrospective study was to evaluate the outcomes of a two-piece implant system with a tube-in-tube internal connection after up to 15 years of clinical use.

MATERIAL AND METHODS

A retrospective follow-up examination of patients treated with internal tube-in-tube implants between 2003 and 2006 was conducted. The implant survival rates, peri-implant conditions (marginal bone loss, bleeding on probing, plaque index, probing depth), and technical complications were determined.

RESULTS

In total, 312 dental implants were placed in 152 patients. Of the original 152 patients enrolled, 245 implants in 112 patients were available for a follow-up evaluation after 11 to 15 years (mean observation time, 12.9 ± 1.1 years). The overall implant survival rate was 93.9%. Outcomes for MBL (1.49 ± 1.23 mm), PI (24.3 ± 22.2%), BOP (18.3 ± 28.7%), and PD (2.74 ± 1.21 mm) were observed. Selected parameters (time after implant surgery, smoking habits, bone augmentation (GBR)) showed an influence on MBL and PD.

CONCLUSIONS

The internal tube-in-tube implant system showed favorable long-term results. The correlation of MBL and PD with the patient-specific factor smoking habit is in accordance with other studies.

CLINICAL RELEVANCE

Camlog Root-Line implants with a tube-in-tube implant-abutment connection and a 1.6-mm polished neck configuration have demonstrated favorable long-term outcomes in daily clinical practice. However, it is important to note that these implants are no longer available on the market.

Comparison of bone loss around submerged and non-submerged implants during osseointegration phase

Background

In Modern dentistry, the implant is the most popular and desirable management of tooth loss. Traditionally two stage (submerged) or one-stage (non-submerged) system has been added by many investigators. In the present study we evaluated the crestal bone loss during osseointegration phase among the three groups (i.e. submerged implants, non-submerged implants with anatomical healing abutment and non- submerged implants with esthetic healing abutment).

Material and Methods

10 subjects with 30 implants, were enrolled in the study. Subjects were randomized in three groups i.e., group 1 submerged (n=10), group 2 non-submerged with anatomical healing abutment (n=10), group 3 non submerged with esthetic healing abutments (n=10). Intraoral periapical radiograph (IOPA), IMAGE J software and CBCT were used to evaluate the crestal bone loss around each implant at baseline, 1 and 3 months after implant placement.

Results

Crestal bone loss at the end of the 3months (osseointegration phase) was lowest in the submerged group (0.18+-0.06mm) followed by non-submerged esthetic group (0.21+-0.03mm) but it was statistically insignificant. Maximum amount of bone loss was observed in non-submerged anatomical abutment group (0.34+-0.03mm) which was highly significant.

Conclusion

It can be concluded that submerged implants technique is a better option in comparison to non-submerged implant technique in terms of radiographical performance during initial phases of osseointegration.

Resonance frequency analysis for evaluation of the connecting condition between fixed prostheses and their abutment teeth: An in vitro and finite element analysis study

STATEMENT OF PROBLEM

Loss of retention is a clinical complication for fixed partial dentures (FPDs). However, a method sensitive enough to measure the early retention loss of FPDs is lacking.

PURPOSE

The purpose of this in vitro and finite element analysis (FEA) study was to determine whether resonance frequency analysis (RFA) with a newly developed system can detect lack of FPD retention caused by cement loss.

MATERIALS AND METHODS

Two evaluation methods were used: RFA of an in vitro model of a 3-unit FPD from the second premolar to the second molar and FEA by using a simplified model. The in vitro model was used to evaluate 4 connecting conditions: both crowns cemented, only the premolar crown cemented, only the molar crown cemented, and both crowns uncemented. Tapping stimulation (16 impulsive forces, 4 Hz) was directly applied to the buccal side of the second molar or the second premolar, and an attached 3D accelerometer sensor was used to record the resonance frequency (RF) of the tapped tooth. The amplitude, frequency, Q-value, and total area under the curve (AUC) of the RF values in the buccolingual direction were compared between connecting conditions. The FEA was done by using a simplified model of a 3-unit FPD with similar connecting conditions as the in vitro model study, and the RF amplitude and frequency of each tooth were calculated. Statistical evaluation included 1-way analysis of variance and the Tukey HSD test to compare the differences among each connecting condition under each parameter for measurement sites on the molar and the premolar, respectively (α=.05).

RESULTS

For both the molar and premolar measurements in both the in vitro and FEA models, when the measurement site was on the uncemented tooth, the amplitude of RF-1 increased, the Q-value of RF-2 decreased, and the area under the curve increased (P<.05).

CONCLUSIONS

The same 3 trends found between the measurement sites of the in vitro study and FEA indicated that RFA may be useful for detecting an FPD with loosening caused by cement loss, even partial cement loss.

A randomized clinical trial comparing the clinical fit and chairside adjustment time for implant-supported crowns fabricated by fully digital and partially digital techniques

STATEMENT OF PROBLEM

Implant-supported crowns made in both fully and partially digital workflows have been evaluated, but these studies have been mainly performed in vitro. Moreover, data on the comparison of clinical fitting and adjustment time for implant-supported crowns are limited.

PURPOSE

The purpose of this randomized clinical trial was to evaluate the clinical fit and adjustment time for implant-supported crowns produced by a partially and fully digital workflow in partially edentulous participants.

MATERIAL AND METHODS

Twenty-eight participants who had received 2 adjacent implants in posterior sites were enrolled, each receiving 2 custom titanium abutments and a splinted monolithic zirconia restoration. Restorations of the control group (n=14) were produced from a digital scan and a cast-free digital workflow, while the restorations of the test group (n=14) were from a conventional impression and a partially digital workflow. A blinded investigator delivered the restorations. The clinical adjustment was performed incrementally, and a digital chronometer recorded the time required for the evaluation and adjustment at each step. An independent t test, Mann-Whitney U test, and the Fisher exact test were used to evaluate the results (α=.05).

RESULTS

The total mean adjustment time in the control group (12.49 minutes) was significantly longer than that of the test group (11.27 minutes) (P<.001). For the occlusal contact points, significantly less clinical adjustment time was required with the cast-free digital workflow (5.31 minutes) than with the model-based partially digital workflow (6.06 minutes) (P=.001). On other surfaces, no significant difference was found between the 2 groups (P>.05). All crowns could be successfully delivered after 2 clinical appointments (impression and delivery). Remakes were not necessary for any restorations in the test or control group.

CONCLUSIONS

The parameters of occlusal adjustment time and total adjustment time of the fully digital workflow were significantly shorter than those of the partially digital workflow.

Prosthetic Rehabilitation of a Non-optimally Positioned Implant With a Resin-Retained Restoration: A Clinical Case Report

Long-term implant rehabilitation is still a problem. After about three months of implantation, the patient should go through rehabilitation to allow for osseointegration. However, poor patient cooperation during lengthy treatments or patient neglect, especially during patient-intensive treatments, can lead to a range of issues that require distinct approaches to solve. A fixed prosthetic is currently the most sought-after course of treatment. Implant misplacement can be a concern, especially during the prosthetic stage. Following the appropriate protocols, one of which has been discussed in this report, makes it possible to achieve prosthetic outcomes for a number of difficult cases. In the case described in this report, resin-retained restoration was used as an alternative to an implant-supported prosthesis because of the non-optimal position of the implant at the time of the prosthetic phase, which was due to discontinuation of treatment on the part of the patient. The conservative preparation of abutment teeth and pontic covering the non-optimally placed implant gave the best outcome and satisfaction on the part of the patient.

Interproximal contact loss between implant restorations and adjacent natural teeth: A systematic review and meta-analysis

PURPOSE

This systematic review was conducted to evaluate the prevalence of interproximal contact loss (ICL) between implant restorations and adjacent teeth in relation to age, gender, follow-up time, and arch location.

METHODS

This study followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines and was registered in the Open Science Framework (OSF). The formulated population, intervention, comparison, outcome (PICO) question was "What is the prevalence of the ICL between implant restoration and adjacent teeth?" The search strategy used four main electronic databases and an additional manual search was performed until February 2023. Clinical studies that evaluated the prevalence of interproximal open contact between implant restorations and adjacent teeth were included. A qualitative analysis for clinical studies was used to assess the risk of bias. In addition, a single-arm meta-analysis of proportion was performed to evaluate the percentage of mesial versus distal open contact and total ICL between implant restoration and adjacent teeth.

RESULTS

Fifteen studies published between 2014 and 2023 met the eligibility criteria. Seven studies presented ICL rates higher than 20%. All studies evaluated ICL in posterior regions (molar, premolar area). Five studies had an ICL rate lower than 50% and three studies had an ICL rate higher than 50%. One study assessed the interproximal contact at three months post-restoration insertion, four studies assessed the interproximal contact at 1-year follow-up and nine studies evaluated the interproximal contact over 2 years of follow-up. Mesial and distal ICL rates were 44.2% (95% CI: 30.6% to 58.6%) and 27.5% (95% CI: 10.5% to 55.0%), respectively. The heterogeneity between studies was high (I2 (95% CI) = 87.8% (75.9% to 93.8%).

CONCLUSION

Based on the results of the included studies, the prevalence of ICL was high, occurring more frequently at the mesial contact. There were no significant differences in relation to age, gender, and arch location.

The cumulative survival rate of sandblasted, large-grit, acid-etched dental implants: a retrospective analysis

PURPOSE

This retrospective study aimed to assess the long-term cumulative survival rate of titanium, sandblasted, large-grit, acid-etched implants over a 10-year follow-up period and investigate the factors affecting the survival rate and change in marginal bone loss (MBL).

METHODS

The study included 400 patients who underwent dental implant placement at the Department of Periodontology of Seoul National University Dental Hospital (SNUDH) between 2005 and 2015. Panoramic radiographic images and dental records of patients were collected and examined using Kaplan-Meier analysis, Cox proportional hazards regression analysis, and multiple regression analysis to determine the survival rates and identify any factors related to implant failure and MBL.

RESULTS

A total of 782 implants were placed with a follow-up period ranging from 0 to 16 years (mean: 8.21±3.75 years). Overall, 25 implants were lost, resulting in a cumulative survival rate of 96.8%. Comparisons of the research variables regarding cumulative survival rate mostly yielded insignificant results. The mean mesial and distal MBLs were 1.85±2.31 mm and 1.59±2.03 mm, respectively. Factors influencing these values included age, diabetes mellitus (DM), jaw location, implant diameter, bone augmentation surgery, and prosthetic unit.

CONCLUSIONS

This study found that the implant survival rates at SNUDH fell within the acceptable published criteria. The patients' sex, age, DM status, implant location, implant design, implant size, surgical type, bone augmentation, and prosthetic unit had no discernible influence on long-term implant survival. Sandblasted, large-grit, acid-etched implants might offer advantages in terms of implant longevity and consistent clinical outcomes.

Load bearing capacity of 3-unit screw-retained implant-supported fixed dental prostheses with a mesial and distal cantilever on a single implant: A comparative in vitro study

OBJECTIVES

To assess the mechanical durability of monolithic zirconia implant-supported fixed dental prostheses (iFDP) design on one implant, with a distal and a mesial extension cantilever bonded to a titanium base compared to established designs on two implants.

MATERIALS AND METHODS

Roxolid Tissue level (TL), and tissue level x (TLX) implants were used to manufacture screw-retained 3-unit iFDPs (n = 60, n = 10 per group), with following configurations (X: Cantilever; I: Implant, T: Test group, C: Control group): T1: X-I-X (TL); T2: X-I-X (TLX); T3: I-I-X (TL); T4: I-I-X (TLX); C1: I-X-I (TL); C2: I-X-I (TLX). The iFDPs were thermomechanically aged and subsequently loaded until fracture using a universal testing machine. The failure load at first crack (Finitial) and at catastrophic fracture (Fmax) were measured and statistical evaluation was performed using two-way ANOVA and Tukey's post-hoc tests.

RESULTS

The mean values ranged between 190 ± 73 and 510 ± 459 N for Finitial groups, and between 468 ± 76 and 1579 ± 249 N for Fmax, respectively. Regarding Finitial, neither the implant type, nor the iFDP configuration significantly influenced measured failure loads (all p > 0.05). The choice of implant type did not show any significant effect (p > 0.05), while reconstruction design significantly affected Fmax data (I-I-Xa < X-I-Xb < I-X-Ic) (p < 0.05). The mesial and distal extension groups (X-I-X) showed fractures only at the cantilever extension site, while the distal extension group (I-I-X) showed one abutment and one connector fracture at the implant/reconstruction interface.

CONCLUSION

Results suggest that iFDPs with I-X-I design can be recommended regardless of tested implant type followed by the mesial and distal extension design on one implant abutment (X-I-X).

Evaluation of safety and efficacy of locally developed dental implants: A noninferiority randomized controlled trial

STATEMENT OF PROBLEM

Various dental implants are available in India, but imported devices are expensive; an affordable locally produced dental implant system would be beneficial.

PURPOSE

The purpose of this noninferiority randomized controlled trial was to compare the safety and efficacy of a locally developed dental implant system to those of an established imported dental implant system with similar microsurface characteristics.

MATERIAL AND METHODS

A total of 136 participants with 201 partially edentulous sites, aged 18 to 65 years, were enrolled in the trial, with 134 sites receiving test implants and 67 sites control implants (n ratio, 2:1). The implants received a delayed submerged healing protocol and were loaded 3 to 6 months after surgery. Maximum insertion torque (IT) was recorded during the implant surgery, and the implant stability quotient (ISQ) was evaluated on the day of surgery and at the second-stage procedure. The mean crestal bone loss (MCBL) was measured on periapical radiographs at prosthetic placement (baseline) and at 6 months and 12 months after loading. The primary measure of outcome was the implant survival rate, and the secondary measure of evaluation was the intergroup difference in MCBL at baseline, 6 months, and 12 months.

RESULTS

A total of 127 test and 61 control implant sites were available for follow-up 1 year after prosthesis placement. At the end of 12 months, the test and control implant groups demonstrated a survival rate of 97% and 100%, respectively. The MCBL difference was significant between the 2 groups at baseline (P<.05). However, at 6 and 12 months, the difference between the test and control groups was not significantly different (P>.05).

CONCLUSIONS

The survival rate of the test group fell within the previously assumed 10% noninferiority margin. Therefore, the null hypothesis was accepted for the trial, and the locally developed implants were noninferior to the imported implants at a sample allocation ratio of 2:1.

Initial damage and failure load of zirconia-ceramic and metal-ceramic posterior cantilever fixed partial dentures

OBJECTIVES

The aim of this study was to compare failure load and initial damage in monolithic, partially veneered, and completely veneered (translucent) zirconia cantilevered fixed partial dentures (CFPDs), as well as completely veneered metal-ceramic CFPDs under different support and loading configurations.

MATERIALS AND METHODS

Eight test groups with anatomically congruent CFPDs (n = 8/group) were fabricated, differing in CFPD material/support structure/loading direction (load applied via steel ball (Ø 6 mm) 3 mm from the distal end of the pontic for axial loading with a 2-point contact on the inner cusp ridges of the buccal and oral cusps and 1.3 mm below the oral cusp tip for 30° oblique loading): (1) monolithic zirconia/CoCr abutment teeth/axial, (2) monolithic zirconia/CoCr abutment teeth/oblique, (3) partially veneered zirconia/CoCr abutment teeth/axial, (4) partially veneered zirconia/CoCr abutment teeth/oblique, (5) completely veneered zirconia/CoCr abutment teeth/axial, (6) completely veneered CoCr/CoCr abutment teeth/axial (control group), (7) partially veneered zirconia/implants/axial, and (8) partially veneered zirconia/natural teeth/axial. Restorations were artificially aged before failure testing. Statistical analysis was conducted using one-way ANOVA and Tukey post hoc tests.

RESULTS

Mean failure loads ranged from 392 N (group 8) to 1181 N (group 1). Axially loaded monolithic zirconia CFPDs (group 1) and controls (group 6) showed significantly higher failure loads. Oblique loading significantly reduced failure loads for monolithic zirconia CFPDs (group 2). Initial damage was observed in all groups except monolithic zirconia groups, and fractography revealed design flaws (sharp edges at the occlusal boundary of the veneering window) in partially veneered zirconia CFPDs.

CONCLUSIONS

Monolithic zirconia CFPDs might be a viable alternative to completely veneered CoCr CFPDs in terms of fracture load. However, oblique loading of monolithic zirconia CFPDs should be avoided in clinical scenarios. Design improvements are required for partially veneered zirconia CFPDs to enhance their load-bearing capacity.

CLINICAL RELEVANCE

Monolithic zirconia may represent a viable all-ceramic alternative to the established metal-ceramic option for CFPD fabrication. However, in daily clinical practice, careful occlusal adjustment and regular monitoring should ensure that oblique loading of the cantilever is avoided.

Full-ceramic resin-bonded fixed dental prostheses: A systematic review

Despite the development of implant-supported prostheses, there are still patients for whom conservative treatments such as resin-bonded fixed dental prostheses (RBFDPs) are more appropriate. This study's objective was to analyze the available research on full-ceramic RBFDPs. In this study, Web of Science, MEDLINE/PubMed, Scopus, Embase, Cochrane Library, and Google Scholar databases were searched for articles published in English between 2010 and 2020. A total of 14 studies were reviewed based on the eligibility criteria. The results showed that using a cantilever design with one abutment had an advantage over two abutments. Additionally, it was proposed that preparations designed with retentive aids, such as a proximal box, groove, and pinhole, could improve RBFDP survival rates. IPS e.max ZirCAD, In-Ceram alumina, and zirconia CAD/CAM were the most commonly used framework materials. Most studies used air abrasion, salinization, or hydrofluoric acid for surface treatment. Adhesive resin cements were the most frequently used type of cement. The survival rate of In-Ceram ceramics (85.3%-94.8%) was lower than that of In-Ceram zirconia and IPS e.max ZirCAD. Debonding, followed by framework fracture, was the leading cause of failure. Following 3-10 years follow-up, the survival percentage of all-ceramic RBFDPs ranged from 76% to 100%. Although RBFDPs have demonstrated satisfactory success as a conservative treatment, long-term follow-ups and higher sample sizes in clinical research are required to gain more reliable outcomes on the clinical success rate of various RBFDP designs.

Long-term clinical outcome of three-unit fixed-fixed posterior zirconia ceramic inlay-retained FDPs with a modified design

OBJECTIVES

To assess the long-term clinical outcome of posterior inlay-retained fixed dental prostheses (IRFDPs) with a modified design made from zirconia ceramic.

METHODS

In 30 patients thirty 3-unit IRFDPs were placed to replace 7 premolars (4 in the maxilla, 3 in the mandible), and 23 first molars (15 in the maxilla, 8 in the mandible). Preparations were accomplished in agreement with the general principles for ceramic inlay restorations and modified with a short retainer-wing bevel preparation within the enamel at the buccal and oral sides. The frameworks were milled from 3Y-TZP ceramic, and the pontics were veneered with feldspathic ceramic. All IRFDPs were bonded with a phosphate monomer containing luting resin after air-abrasion of the intaglio surfaces. The patients were recalled 6-12 months after placement, and then annually. Kaplan-Meier analysis was used to calculate the survival and complication rates of the IRFDPs.

RESULTS

The mean observation time was 10.6 ± 1.5 years. The 10-year cumulative survival rate was 89% with 4 failures, two of them were due to deep secondary caries with loss of retention, one due to repeated debonding with enamel fractures, and one due to generalized progressive periodontitis. The most common complication was chipping of the veneering ceramic (20.1%). Eighteen IRFDPs were free of any type of complication up to 15.4 years, which corresponds to a 10-year cumulative success rate of 70.4%.

CONCLUSION

The long-term clinical performance of modified IRFDPs made of veneered zirconia ceramics was favorable after 10 years, therefore, they represent a treatment alternative to replace posterior single missing teeth.

CLINICAL SIGNIFICANCE

Zirconia-based IRFDPs fabricated in the modified design may represent a substance-preserving alternative to conventional posterior FDPs to replace posterior single missing teeth, particularly in cases where implants cannot be placed, and when the adjacent teeth already have small restorations or defects.

Conometric Connection for Implant-Supported Crowns: A Prospective Clinical Cohort Study

BACKGROUND

Traditional screw or cemented connections in dental implants present limitations, prompting the exploration of alternative methods. This study assesses the clinical outcomes of single crowns and fixed partial prostheses supported by conometric connections after one year of follow-up.

METHODS

Twenty-two patients received 70 implants, supporting 33 rehabilitations. Biological responses and prosthodontic complications were evaluated at baseline, 6 months, and 12 months.

RESULTS

All implants exhibited successful osseointegration, with no losses or peri-implant inflammation. Marginal bone levels showed minimal changes, well below pathological thresholds. The difference in marginal bone loss (MBL) was -0.27 ± 0.79 mm between T0 and T1, and -0.51 ± 0.93 mm between T0 and T2. No abutment screw loosening or crown chipping occurred. However, coupling stability loss was observed in nine cases.

CONCLUSIONS

The conometric connection demonstrated successful integration and minimal complications after one year. This alternative shows promise, particularly in simplifying handling and improving marginal adaptation. Further research with larger sample sizes and longer follow-up is warranted for comprehensive validation.

Prosthetic complications and failures of implant-supported fixed partial dentures: A scoping review

STATEMENT OF PROBLEM

Although high survival rates of implant-supported fixed partial dentures (ISFPDs) have been reported, evidence for complications, failures, and factors that interfere with their longevity is lacking.

PURPOSE

The purpose of this scoping review was to review the literature to investigate the most common failures and complications of ISFPDs.

MATERIAL AND METHODS

This review followed the preferred reporting items for systematic reviews and meta-analyses scoping review (PRISMA ScR) guidelines, and the methodology was registered on the open science framework (osf.io/5xqkp). An electronic search was conducted in PubMed/MEDLINE, Embase, Cochrane Library, Scopus, and Web of Science databases and nonpeer-reviewed literature for articles published from 2013 to January 2023. Studies that evaluated the clinical performance of ISFPDs with at least 1 year of follow-up and described the concepts of failure and success were included.

RESULTS

The search yielded 5695 studies. Fourteen articles were included in this review for data extraction. Veneering porcelain fracture, screw fracture, and implant loss were the most common failures reported. Technical complications mainly involved screw loosening, loss of retention, and wear of the screw-access restoration.

CONCLUSIONS

Bruxism, mismatch of the thermal expansion coefficient, unsatisfactory support of the framework, choice of cement, shape of the titanium abutments, and extended length of the cantilever were associated with the longevity of the ISFPD. Despite the high survival rate of ISFPDs, data must be carefully interpreted because of the variation in the materials used to manufacture the ISFPD and the heterogeneity of the studies in this review.

Prevalence and risk of peri-implant diseases based on the type of prosthetic restoration: A retrospective study after 17 to 23 years

STATEMENT OF PROBLEM

Information on the epidemiology and etiopathology of peri-implant diseases in reference to prostheses is sparse.

PURPOSE

The purpose of this retrospective clinical study was to analyze the prevalence and risk of peri-implant diseases based on the type of prosthesis.

MATERIAL AND METHODS

A total of 274 implants in 106 patients were evaluated by clinical and radiological examination. Peri-implant mucositis was defined by bleeding on probing, whereas peri-implantitis was defined by additional bone loss ≥1.5 mm since seating of the definitive prosthesis. Prosthetic design and anamnestic risk factors were assessed in a regression analysis, whereas clinical and radiological differences between the prosthesis groups were compared by the Pearson chi-squared test (α=.05 for all procedures).

RESULTS

The median observation period was 18 years. Seventy-two implants were restored with single crowns, 138 implants with fixed partial dentures, and 64 implants with removable prostheses. Peri-implant mucositis was diagnosed more often in implants supporting fixed partial dentures (42.8%), whereas peri-implantitis was found more frequently in implants supporting removable prostheses (31.3%) (overall distribution pattern: P<.001). The type of prosthetic restoration was confirmed to be an independent prognostic risk factor regarding peri-implant diseases (P=.005). Additionally, increased bone loss was found with implant-supported removable prostheses, regardless of peri-implantitis (P<.001).

CONCLUSIONS

The type of prosthetic restoration was identified as an independent risk factor for the development of peri-implant diseases. Particularly, implants supporting double crown-retained removable prostheses might be at risk.

Comparative Analysis of the Structural Weights of Fixed Prostheses of Zirconium Dioxide, Metal Ceramic, PMMA and 3DPP Printing Resin-Mechanical Implications

The aim of this study was to determine the mechanical implications of four-unit fixed dental prostheses (FDPs) made of (1) monolithic zirconium dioxide (ZR O2), (2) polymethylmethacrylate (PMMA), (3) metal ceramic (PFM) and (4) impression resin (3DPP).

METHODS

Four groups were studied with eight samples for each material (n: 32). Each structure was weighed, subjected to compressive tests and analyzed using 3D FEA.

RESULTS

PMMA presented the lowest structural weight (1.33 g), followed by 3DPP (1.98 g), ZR O2 (6.34 g) and PFM (6.44 g). In fracture tests, PMMA presented a compressive strength of 2104.73 N and a tension of 351.752 MPa; followed by PFM, with a strength of 1361.48 N and a tension of 227.521 MPa; ZR O2, with a strength of 1107.63 N and a tension of 185.098 MPa; and 3DPP, with a strength of 1000.88 N and a tension of 143.916 MPa. According to 3D FEA, 3DPP presented the lowest degree of deformation (0.001 mm), followed by PFM (0.011 mm), ZR O2 (0.168 mm) and PMMA (1.035 mm).

CONCLUSIONS

The weights of the materials did not have a direct influence on the mean values obtained for strength, stress or strain. Since the performance was related to the tension and forces supported by the structures in critical zones, the importance of considering design factors is clear. In vitro and 3D FEA assays allowed us to simulate different scenarios for the mechanical properties of certain materials before evaluating them clinically. Thus, they can generate predictions that would allow for the design of a better research methodology in future clinical trials.

Rehabilitation of the severely resorbed maxilla by using quad zygomatic implant-supported prostheses: a systematic review and meta-analysis

STATEMENT OF PROBLEM

Quad zygomatic implants have been used as a treatment option for patients with a severely resorbed maxilla. However, data on the average rate of success of the prosthesis, survival of the zygomatic implants, and associated complications are sparse.

PURPOSE

The purpose of this systematic review and meta-analysis was to assess prosthetic and zygomatic implant success of treating severe maxillary resorption with prostheses supported by 4 zygomatic implants, with an additional review on potential complications.

MATERIAL AND METHODS

A comprehensive search of studies published in English between January 2001 and December 2020 was performed in the PubMed, OVID, EBSCO, and EMBASE databases according to the Preferred Reporting Items for Systematic reviews and Meta-analyses (PRISMA) guidelines. The study was registered in the International Prospective Register of Systematic Reviews (PROSPERO ID: CRD42021219468). The population, intervention, comparison, and outcome (PICO) question was "What is the effectiveness of oral rehabilitations using only 4 zygomatic implants placed in severely resorbed maxillae?" The search results were subjected to a systematic review for articles reporting prosthetic success and zygomatic implant survival. Prosthetic success was analyzed by using a fixed-effects inverse-variance model. The random-effects model was adopted for meta-analysis as moderate heterogeneity was identified among studies that reported implant survival in quad zygoma treatments. The quality of publications was appraised by using the Critical Appraisal Skills Program (CASP) checklists.

RESULTS

Of the 82 titles, 7 studies that met the inclusion criteria without an overlap of patient cohorts were quantitatively analyzed for the average rate of prosthetic success and implant survival. All prostheses in the aggregated studies were immediately loaded with acrylic resin interim prostheses replaced by a definitive prosthesis, which consisted of overdentures retained by bar splinting (n=2), metal bar-reinforced prostheses (n=2), fixed screw-retained acrylic resin prostheses (n=34), and screw-retained titanium prostheses with ceramic or acrylic resin teeth (n=75). Technical complications of zygomatic implants included mobility associated with a machined surface and fracture of the abutment screw. The most common prosthetic complications reported were fracture of the definitive prosthesis and loss of the interim prosthesis subsequent to the failure of at least 1 zygomatic implant. The results showed that prostheses supported by quad zygoma implants displayed an overall success of 100% (CI=95%, I2=0.00%, P=.850), whereas zygomatic implants showed a survival rate of 98% (CI=95%, I2=60.48%, P=.040) with minimal implant failures and few complications.

CONCLUSIONS

Although the data analysis showed favorable results for rehabilitating severely resorbed maxillae by using quad zygoma with high prosthetic success and high implant survival rate, further long-term clinical studies are required to strengthen the evidence. However, potential implant and prosthetic complications should be considered while planning this treatment approach.

Comparative Evaluation of Implant-Protected Occlusion in Partially Edentulous Fixed Restoration Using Qualitative and Quantitative Assessment - A Prospective Clinical Trial

OBJECTIVES

To compare and evaluate the occlusal variability/discrepancy recorded using qualitative (articulating paper) and quantitative (T-scan) techniques in partially edentulous implant-supported restorations.

MATERIALS AND METHODS

A total of 20 patients in the age group of 25-61 yrs participated in this study. All the patients had more than one tooth replaced with implant-supported prosthesis. After three months of restoration, occlusion reevaluated was carried out using qualitative (articulating paper) and quantitative (T-scan). T-scan data were used to measure implant occlusion time, occlusion time, and the relative occlusal force (ROFs) on implant prosthesis. And the data were statistically evaluated.

RESULTS

The T-scan values showed high points on the implants in most of the patients, which could not be evaluated by that of articulating paper outcomes.

CONCLUSION

The occlusal harmony achieved from using qualitative analysis of articulating paper was not supported by the finding of the quantitative analysis (T-scan). Also the T-scan provided the time interval of occlusion of the implant-supported restorations, which would help in better defining the implant-protected occlusal.

CLINICAL RELEVANCE

The T-scan occlusal analysis system provides ROF and time intervals of occlusal contact. This allows accurate occlusal equilibration of implant-supported restoration according to implant protected occlusal concept.

Evaluation of Tension and Deformation in a Mandibular Toronto Bridge Anchored on Three Fixtures Using Different Framework Materials, Abutment Systems, and Loading Conditions: A FEM Analysis

OBJECTIVE

 The aim of this study was to investigate by finite element method analysis the behaviour of a three-implant mandible Toronto framework made by three different materials, with two abutment systems and two loading conditions.

MATERIALS AND METHODS

 Three implants were virtually inserted in a mandible model in positions 3.6, 4.1, and 4.6. Three prosthetic framework bars with the same design and dimension (4.8 × 5.5 mm) were projected. The variables introduced in the computer model were the framework materials (glass fiber reinforced resin, Co-Cr, TiAl6V4), the abutment systems (Multi-Unit-Abutment [MUA]/OT-Bridge), and the loading conditions (500 N vertical load on all the framework area and 400 N on a 7-mm distal cantilever). The computer was programmed with physical properties of the materials as derived from the literature. Maximum tension and deformation values for each variable were registered at framework, screws, and abutment level and then compared.

RESULTS

 Metal frameworks Cr-Co and TiAl6V4 resulted in lower deformation than glass fiber-reinforced resin frameworks while presenting higher tension values. The OT-Bridge exhibited lower maximum tension and deformation values than the MUA system. The first loading condition reached higher tension and deformation values than the second and it resulted in more uniformly distributed load on all the framework area, especially with the OT-Bridge system.

CONCLUSION

 More rigid materials and OT-Bridge system decrease the deformation on the prosthetic components. Tension stresses are more uniformly distributed with glass fiber-reinforced resin, in the OT-Bridge system and avoiding cantilever loading.

Should compromised first permanent molar teeth in children be routinely removed? A health economics analysis

OBJECTIVE

To evaluate the cost-effectiveness of retaining one or more compromised first permanent molars (cFPMs) affected by dental caries or enamel hypomineralization, compared to timely extraction, in children aged 8 years.

METHODS

A Markov model was developed to simulate the lifetime of a cFPM. Two management strategies were compared: extraction facilitating spontaneous space closure or maintenance of teeth with restorations. Ten health states were utilized to capture long-term outcomes including various tooth restorations, prostheses or a retained gap at the cFPM site. Outcomes were expressed as Quality Adjusted Tooth-Years (QATYs). The model was informed by survey data on patient preferences for treatment outcomes and UK data on costs. Discounted costs and QATYs were calculated over 62 years.

RESULTS

Regardless of the number of cFPMs, retaining cFPMs was more effective than early removal, generating an additional 2.3 QATYs per cFPM. Early removal of one or two cFPM under general anaesthetic (GA) was more expensive than retention and hence never cost-effective. Retaining a cFPM was more expensive than early removal under local anaesthesia or where four cFPMs were extracted under GA. In these cases, retaining cFPMs was cost-effective if a QATY was valued at £100 or £35, respectively. Results were robust to sensitivity analysis.

CONCLUSION

Preserving a cFPM was more cost-effective than the early loss of one, or two cFPMs under GA. Preservation of four cFPMs was cost-effective if sufficient value was placed on a QATY. These findings can guide clinical practice on management of cFPMs alongside patient/payer values on maintaining teeth.

Root-analogue implants compared to forced orthodontic extrusion: a retrospective analysis of clinical, radiological and esthetic outcomes after restoration

OBJECTIVES

To assess clinical, radiological and esthetic outcomes of restorations supported by root-analogue implants (RAIs) or roots of severely damaged teeth after forced orthodontic extrusion (FOE).

MATERIALS AND METHODS

Clinical data regarding milled one-piece (titanium/zirconia roots and zirconia abutments) RAIs (REPLICATE™ System) and FOE were recorded and retrospectively evaluated for 40 patients by two investigators. Strict inclusion and exclusion criteria were applied. Functional and esthetic outcomes were assessed for n = 20 pre-molars and n = 20 anterior teeth via comparison of radiographic and digital images applying the novel Functional Implant Prosthodontic Score (FIPS). Krippendorff's alpha coefficient was calculated to assess inter-rater reliability. Mann-Whitney-U-Test was used to compare the assessed parameters. Level of significance was set to p < 0.05.

RESULTS

After a mean observation period of 18.4 ± 5.7 months for restorations supported by RAIs and 43.9 ± 16.4 months for restorations after FOE, mean FIPS scores were 9.2/8.8 ± 1.1/1.2 (RAIs) and 7.4/7.7 ± 1.3/1.5 (FOE), respectively. Krippendorff's alpha coefficients did not reveal unacceptable inter-rater reliabilities regarding the investigators and applicability of FIPS. Significant differences were documented when comparing restorations after FOE or supported by RAIs regarding bone loss (p < 0.01), presence of papillae (p < 0.05) and quality and quantity of mucosa (p < 0.02) in favor of FOE.

CONCLUSIONS

Within the main limitations of sample size and the retrospective study design, both concepts seem to provide clinically acceptable results.

CLINICAL RELEVANCE

Bone- and tissue-preserving characteristics regarding the concept of FOE are promising. It could be applicable for socket preservation and subsequent conventional implant placements in an adapted workflow.

Risk factors associated with screw loosening in CAD-CAM custom abutments: A 6-year retrospective study

STATEMENT OF PROBLEM

Custom abutments made by using computer-aided design and computer-aided manufacturing (CAD-CAM) are often used for implant-supported prostheses. However, studies on screw loosening of implant prostheses using custom abutments are lacking.

PURPOSE

The purpose of this retrospective study was to investigate the risk factors of screw loosening in implant-supported prostheses using custom abutments made with CAD-CAM.

MATERIAL AND METHODS

Clinical charts, radiographic images, and CAD custom abutment design file data were collected and analyzed retrospectively. The study included 255 patients with 401 dental implants, and the follow-up duration was 6 years. Age, sex (male/female), type of unit (single-unit or multiunit), location of the implant (maxilla or mandible and anterior, premolar, or molar tooth), type of antagonist, and experience of the prosthodontist were reviewed, and implant angulation (mesiodistal and buccolingual), location of the screw access hole (mesiodistal and buccolingual distances from center), and attrition status (none, localized, or generalized) were measured by using a CAD file. The frequencies and percentages of risk factors were evaluated with the Fisher exact test, and the Bonferroni correction was used as a post hoc test. Multiple logistic regression with the Firth method was performed to calculate the odds ratios and their confidence intervals (α=.05).

RESULTS

Screw loosening showed a correlation with the severity of attrition (P<.001). Single-unit prostheses had a higher risk of screw loosening than multiunit prostheses (P<.001). Experience of the prosthodontist (P<.001). Buccolingual angulation of the implant and abutment significantly influenced the incidence of screw loosening (P<.05). Age, sex, location of the implant, type of antagonist, mesiodistal implant angulation, and buccolingual and mesiodistal location of the screw access hole did not significantly influence the incidence of screw loosening (P>.05).

CONCLUSIONS

The degree of attrition, buccolingual angulation of the implant and abutment, type of unit, and experience of the prosthodontist (>3 years or <3 years) were risk factors in the incidence of screw loosening.

Effect of the Abutment Rigidity on the Wear Resistance of a Lithium Disilicate Glass Ceramic: An In Vitro Study

Lithium disilicate (LDS) glass ceramics are among the most common biomaterials in conservative dentistry and prosthodontics, and their wear behavior is of paramount clinical interest. An innovative in vitro model is presented, which employs CAD/CAM technology to simulate the periodontal ligament and alveolar bone. The model aims to evaluate the effect of the abutment rigidity on the wear resistance of the LDS glass ceramic. Two experimental groups (LDS restorations supported by dental implants, named LDS-on-Implant, or by hybrid ceramic tooth replicas with artificial periodontal ligament, named LDS-on-Tooth-Replica) and a control group (LDS-Cylinders) were compared. Fifteen samples (n = 15) were fabricated for each group and subjected to testing, with LDS antagonistic cusps opposing them over 120,000 cycles using a dual axis chewing simulator. Wear resistance was analyzed by measuring the vertical wear depth (mm) and the volume loss (mm3) on each LDS sample, as well as the linear antagonist wear (mm) on LDS cusps. Mean values were calculated for LDS-Cylinders (0.186 mm, 0.322 mm3, 0.220 mm, respectively), LDS-on-Implant (0.128 mm, 0.166 mm3, 0.199 mm, respectively), and LDS-on-Tooth-Replica (0.098 mm, 0.107 mm3, 0.172 mm, respectively) and compared using one-way-ANOVA and Tukey's tests. The level of significance was set at 0.05 in all tests. Wear facets were inspected under a scanning electron microscope. Data analysis revealed that abutment rigidity was able to significantly affect the wear pattern of LDS, which seems to be more intense on rigid implant-abutment supports compared to resilient teeth replicas with artificial periodontal ligament.

To determine the effect of plasma nitriding treatment 56 on screw loosening and surface topography of different 78 implant-abutment screw systems with and without thermocycling: An in vitro study

Aim

The aim of this study was to evaluate and compare the effect of plasma nitride-treated abutment screws of two different implant systems on screw loosening and surface topography with and without thermocycling.

Settings and Design

This was an in-vitro experimental study.

Materials and Methods

Fifty-two abutment screws (Group A: 26 Genesis and Group B: 26 Bredent) underwent plasma nitride treatment and were subdivided into two groups, one without thermocycling and one with thermocycling. Dynamic load was applied and detorque values were evaluated for determining the screw loosening using "independent t-test" with the help of IBM SPSS Statistics 20 and scanning electron microscopy was done to check for surface topography.

Statistical Analysis Used

Inter- and intragroup comparisons were done using independent t-test (SPSS: Statistical Package for the Social Sciences software version 20).

Results

Plasma nitriding treatment genesis implant system abutment screw showed more screw loosening (P < 0.05) and surface roughness as compared to bredent with and without thermocycling.

Conclusion

From the present study, it was shown that plasma nitride-treated abutment screws decreased the occurrence of screw loosening favoring the bredent implant-abutment system more than the genesis implant-abutment system.

Influence of Periodontal Status and Prosthetic Treatment on Survival and Success Rates in Implant Therapy: A 5-Year Retrospective Follow-Up Study

The objective of the present study was to evaluate the 5-year outcome of dental implant therapy and assess the survival, success, and biological and technical complications. A periodontal and prosthetic-oriented evaluation was conducted on the variables that can influence the long-term predictability of implant therapy. A total of 615 patients and 1427 dental implants from a private clinic (MedArtis Dent, Cluj-Napoca, Romania) were enrolled in the study. The study was a longitudinal cohort with data collected retrospectively from physical/digital dental records in combination with a cross-sectional clinical/radiological examination. Results showed that periodontal diagnosis at baseline had a significant impact on the marginal bone loss prediction. Data showed that the cylindrical implant with an internal 45° medium taper connection experienced a higher rate of bone resorption compared to the tapered implant with the 5° internal connection. Screw-retained restorations and overdentures showed a statistical decrease in the marginal bone level height when compared to the cemented restorations. Data from our study suggest that not only is there a powerful association between recall visits and the rate of complications in dental implant treatment, but a lack of professional maintenance predicts a higher bone level loss during the 5-year interval.

Technical complications with tooth-supported fixed dental prostheses (FDPs) of different span lengths: an up to 15-year retrospective study

BACKGROUNDS

Long-span dental bridges may cause excessive load on abutment teeth and the periodontal area, which may lead to bridge fractures or periodontal problems. However, some reports have revealed that short- and long-span bridges can provide a similar prognosis. This clinical study aimed to investigate the technical complications associated with fixed dental prostheses (FDPs) of different span lengths.

METHODS

All patients with previously cemented FDPs were clinically examined during their follow-up visits. Several data related to FDPs were registered, such as design, material type, location, and type of complication. The main clinical factors analyzed were technical complications. Life table survival analyses were performed to calculate the cumulative survival rate of FDPs when technical complications were detected.

RESULTS

The study examined 229 patients with a total number of 258 prostheses and an average of 98 months of follow-up. Seventy-four prostheses suffered from technical complications, and the most common complication was ceramic fracture or chipping (n = 66), while loss of retention occurred in 11 prostheses. The long-term evaluation of long-span prostheses revealed a significantly higher technical complication rate compared to short-span prostheses (P = ,003). The cumulative survival rate for short-span FDPs was 91% in year 5, 68% in year 10, and 34% in year 15. For long-span FDPs, the cumulative survival rate was 85% in year 5, 50% in year 10, and 18% in year 15.

CONCLUSION

Long-span prostheses (5 units or more) can be associated with a higher technical complication rate compared to short-span prostheses after long-term evaluation.

Static and Fatigue Mechanical Performance of Abutments Materials for Dental Restorations

The choice of the proper restorative material is essential for the long-term success of implant-supported rehabilitations. This study aimed to analyze and compare the mechanical properties of four different types of commercial abutment materials for implant-supported restorations. These materials included: lithium disilicate (A), translucent zirconia (B), fiber-reinforced polymethyl methacrylate (PMMA) (C), and ceramic-reinforced polyether ether ketone (PEEK) (D). Tests were carried out under combined bending-compression conditions, which involved applying a compressive force tilted with respect to the abutment axis. Static and fatigue tests were performed on two different geometries for each material, and the results were analyzed according to ISO standard 14801:2016. Monotonic loads were applied to measure static strength, whereas alternating loads with a frequency of 10 Hz and a runout of 5 × 10⁶ cycles were applied for fatigue life estimation, corresponding to five years of clinical service. Fatigue tests were carried out with a load ratio of 0.1 and at least four load levels for each material, and the peak value of the load levels was reduced accordingly in subsequent levels. The results showed that the static and fatigue strengths of Type A and Type B materials were better than those of Type C and Type D. Moreover, the fiber-reinforced polymer material, Type C, showed marked material-geometry coupling. The study revealed that the final properties of the restoration depended on manufacturing techniques and the operator's experience. The findings of this study can be used to inform clinicians' choice of restorative materials for implant-supported rehabilitation, considering factors such as esthetics, mechanical properties, and cost.

The Success Rate of the Adhesive Partial Fixed Prosthesis after Five Years: A Systematic Review

Objective: Evaluation of the success and/or survival rates of resin-bonded fixed partial dentures (RBFPDs) reported in the scientific literature with a minimum average observation time of five years. Materials and Methods: Search conducted in Pubmed, Web of Science, and Cochrane databases in free-text format and MESH terms, until May 2021. The random-effects model was used for the estimated survival rate, percentage per year of estimated failure, and existing complications for the meta-analysis. Study heterogeneity was assessed by the inconsistency test (I2) and study quality by the Downs and Black scale. Results: Eleven articles were included, with 687 participants and 783 RBFPDs, with a mean observation time of 8.2 years, with success rates mentioned in three articles and survival rates reported in nine articles. A total of 142 failures were reported for 783 prostheses, the most frequent being debonding. The estimated failure rate was between 0.53% and 5.10% per year. The studies were of sufficient quality. In the meta-analysis, the survival rates showed a significant result (p < 0.001), with moderate heterogeneity (I2 = 58.76%). Conclusions: Within the limitations of this research, mainly related to the heterogeneity of the studies and their quality, it seems possible to conclude that RBFPDs are a viable clinical option for the rehabilitation of patients with single edentulous spaces, mainly when using a single retainer and a zirconia-ceramic prosthesis.

What every dental practitioner should know about how to examine patients with dental implants

Dental implants are a common treatment modality provided in both primary and secondary care settings. It is increasingly common for a general dental practitioner to see patients with implant-retained restorations. This article suggests an implant safety checklist for general dental practitioners to help them examine an implant-retained prosthesis.

Prevalence of proximal contact loss between implant-supported prostheses and adjacent natural teeth: A systematic review and meta-analysis

STATEMENT OF PROBLEM

Proximal contact loss between implant-supported prostheses and adjacent natural teeth is a complication that has been reported in clinical practice. However, the prevalence of the condition is unclear.

PURPOSE

The purpose of this systematic review and meta-analysis was to assess the proportion of reported proximal contact loss between implant-supported prostheses and adjacent natural teeth.

MATERIAL AND METHODS

This systematic review followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) methodology criteria and was registered on the international prospective register of systematic reviews (PROSPERO) platform (CRD42021225138). The electronic search was conducted by using the PubMed/MEDLINE, Embase, and Cochrane Library databases to September 2020. The formulated population, intervention, comparison, outcome (PICO) question was "Is there a correlation of the proximal contact loss between implant-supported prostheses and the adjacent natural tooth?" A single-arm meta-analysis of proportion was performed to evaluate the cumulative prevalence of survival and complication rates.

RESULTS

This review included 10 studies, half of which presented proximal contact loss rates higher than 50%. In the general analysis, the open proximal contact showed a cumulative proportion of 41% (confidence interval: 30% to 53%; heterogeneity: I²=98%; t²=0.578; P<.01). From the subanalysis, the mesial contact (47%; confidence interval: 32% to 62%; heterogeneity: I²= 96%; t²=0.657; P<.01) and the mandibular arch (41%; confidence interval: 30% to 52%; heterogeneity: I²=92%; t²=0.302; P<.01) were found to have higher prevalence.

CONCLUSIONS

The prevalence of proximal contact loss was high, occurring more frequently with the mesial contact and in the mandibular arch. Significant differences were not found in relation to sex or between the posterior and anterior regions.

Oral and Periodontal Risk Factors of Prosthetic Success for 3-Unit Natural Tooth-Supported Bridges versus Implant-Supported Fixed Dental Prostheses

The goals of this research are: (1) to compare the survival and prosthetic success of metal-ceramic 3-unit tooth- versus implant-supported fixed dental prostheses; (2) to evaluate the influence of several risk factors on the prosthetic success of tooth- and implant-supported fixed dental prostheses (FPDs). A total of 68 patients with posterior short edentulous spaces (mean age 61.00 ± 1.325 years), were divided into two groups: 3-unit tooth-supported FPDs (40 patients; 52 FPD; mean follow-up 10.27 ± 0.496 years) and 3-unit implant-supported FPDs (28 patients; 32 FPD; mean follow-up 8.656 ± 0.718 years). Pearson-chi tests were used to highlight the risk factors for the prosthetic success of tooth- and implant-supported FPDs and multivariate analysis was used to determine significant risk predictors for the prosthetic success of the tooth-supported FPDs. The survival rates of 3-unit tooth- versus implant-supported FPDs were 100% and 87.5%, respectively, while the prosthetic success was 69.25% and 68.75%, respectively. The prosthetic success of tooth-supported FPDs was significantly higher for patients older than 60 years (83.3%) vs. 40-60 years old (57.1%) (p = 0.041). Periodontal disease history decreased the prosthetic success of tooth- versus implant-supported FPDs when compared with the absence of periodontal history (45.5% vs. 86.7%, p = 0.001; 33.3% vs. 90%, p = 0.002). The prosthetic success of 3-unit tooth- vs. implant-supported FPDs was not significantly influenced by gender, location, smoking, or oral hygiene in our study. In conclusion, similar rates of prosthetic success were recorded for both types of FPDs. In our study, prosthetic success of tooth- versus implant-supported FPDs was not significantly influenced by gender, location, smoking, or oral hygiene; however, history of periodontal disease is a significant negative predictor of success in both groups when compared with patients without periodontal history.

Short-term and long-term success and survival rates of implants supporting single-unit and multiunit fixed prostheses: A systematic review and meta-analysis

STATEMENT OF PROBLEM

Whether placing implants to replace each missing tooth or using implant-supported fixed partial dentures provides better outcomes is unclear.

PURPOSE

The purpose of this systematic review and meta-analysis was to assess the success and survival rates of implants supporting single-unit and multiunit fixed prostheses by using conventional protocols for placement and loading in short- and long-term follow-ups.

MATERIAL AND METHODS

An electronic search was conducted in PubMed, Scopus, and Web of Science for studies published up to March 17, 2022. Comparative studies that reported the success or survival rates of both single-unit and splinted multiunit prostheses were considered for qualitative and quantitative analyses.

RESULTS

A total of 68 publications comprising 11 271 implants were included. Compared with the single prostheses, the splinted multiunit group showed no significant differences in implant success rates in the short-term (risk difference=-0.004; 95% confidence interval (CI)=-0.033 to 0.025; P=.780) and long-term (risk difference=0.003; 95% confidence interval (CI)=-0.029 to 0.034; P=.874) follow-ups. Significant statistical differences were also not found in terms of the survival rates of the 2 groups (short-term risk difference=-0.004; 95% CI=-0.031 to 0.023; P=.779, long-term risk difference=-0.002; 95% CI=-0.029 to 0.025; P=.887).

CONCLUSIONS

Implants supporting single-unit or splinted multiunit prostheses seem to be a predictable treatment in terms of survival and success over short and long periods. Nonetheless, it seems that cantilever and nonsplinted multiunit prostheses should be used with more caution.

Satisfaction and preferences among patients with both implant-supported single crown and tooth-supported fixed dental prosthesis: a pilot study

OBJECTIVE

The objective of the study was to assess patient-reported preferences and outcomes in patients rehabilitated with both an implant-supported single crown (ISC) and a tooth-supported fixed dental prosthesis (FDP).

MATERIALS AND METHODS

The electronic journal system at the Faculty of Dentistry, University of Oslo, was searched to find patients presenting both an ISC and an FDP replacing no more than two teeth between abutments. Identified patients that agreed answered a questionnaire followed by a clinical examination. Descriptive statistics was calculated.

RESULTS

Thirty patients were included. The mean function time was 11.8 years for FDPs and 6.6 years for ISCs. All but three patients were satisfied with both rehabilitation modalities. No patients were unsatisfied with aesthetics or function of either rehabilitation. All patients reported satisfactory function of their restorations and reported chewing without problems. The self-reported post-operative complications were few, but less than observed in the clinical examinations.

CONCLUSIONS

More patients reported food impaction with their FDP as compared to their ISC. Function and aesthetics of FDPs and ISCs were rated similarly, but more patients found the ISC treatment more uncomfortable. Despite this finding, most patients would prefer to undergo ISC treatment if they were to replace another missing tooth.