Bone regeneration after topical BMP-2-gene delivery in circumferential peri-implant bone defects

An Innovative Design to Enhance Osteoinductive Efficacy and Biomechanical Behavior of a Titanium Dental Implant

The present study investigated the in vivo bone-forming efficacy of an innovative titanium (Ti) dental implant combined with a collagen sponge containing recombinant human bone morphogenetic protein-2 (BMP-2) in a pig model. Two different concentrations of BMP-2 (20 and 40 µg/mL) were incorporated into collagen sponges and placed at the bottom of Ti dental implants. The investigated implants were inserted into the edentulous ridge at the canine-premolar regions of Lanyu small-ear pigs, which were then euthanized at weeks 1, 2, 4, 8, and 12 post-implantation. Specimens containing the implants and surrounding bone tissue were collected for histological evaluation of their bone-to-implant contact (BIC) ratios and calculation of maximum torques using removal torque measurement. Analytical results showed that the control and BMP-2-loaded implants presented good implant stability and bone healing for all testing durations. After 1 week of healing, the BMP-2-loaded implants with a concentration of 20 µg/mL exhibited the highest BIC ratios, ranging from 58% to 76%, among all groups (p = 0.034). Additionally, they also possessed the highest removal torque values (50.1 ± 1.3 N-cm) throughout the 8-week healing period. The BMP-2-loaded implants not only displayed excellent in vivo biocompatibility but also presented superior osteoinductive performance. Therefore, these findings demonstrate that BMP-2 delivered through a collagen sponge can potentially enhance the early-stage osseointegration of Ti dental implants.

Development of Bioactive Scaffolds for Orthopedic Applications by Designing Additively Manufactured Titanium Porous Structures: A Critical Review

We overview recent findings achieved in the field of model-driven development of additively manufactured porous materials for the development of a new generation of bioactive implants for orthopedic applications. Porous structures produced from biocompatible titanium alloys using selective laser melting can present a promising material to design scaffolds with regulated mechanical properties and with the capacity to be loaded with pharmaceutical products. Adjusting pore geometry, one could control elastic modulus and strength/fatigue properties of the engineered structures to be compatible with bone tissues, thus preventing the stress shield effect when replacing a diseased bone fragment. Adsorption of medicals by internal spaces would make it possible to emit the antibiotic and anti-tumor agents into surrounding tissues. The developed internal porosity and surface roughness can provide the desired vascularization and osteointegration. We critically analyze the recent advances in the field featuring model design approaches, virtual testing of the designed structures, capabilities of additive printing of porous structures, biomedical issues of the engineered scaffolds, and so on. Special attention is paid to highlighting the actual problems in the field and the ways of their solutions.

Traditional Chinese medicine promotes bone regeneration in bone tissue engineering

Bone tissue engineering (BTE) is a promising method for the repair of difficult-to-heal bone tissue damage by providing three-dimensional structures for cell attachment, proliferation, and differentiation. Traditional Chinese medicine (TCM) has been introduced as an effective global medical program by the World Health Organization, comprising intricate components, and promoting bone regeneration by regulating multiple mechanisms and targets. This study outlines the potential therapeutic capabilities of TCM combined with BTE in bone regeneration. The effective active components promoting bone regeneration can be generally divided into flavonoids, alkaloids, glycosides, terpenoids, and polyphenols, among others. The chemical structures of the monomers, their sources, efficacy, and mechanisms are described. We summarize the use of compounds and medicinal parts of TCM to stimulate bone regeneration. Finally, the limitations and prospects of applying TCM in BTE are introduced, providing a direction for further development of novel and potential TCM.

BMP-2 Delivery through Liposomes in Bone Regeneration

Bone regeneration is a central focus of maxillofacial research, especially when dealing with dental implants or critical sized wound sites. While bone has great regeneration potential, exogenous delivery of growth factors can greatly enhance the speed, duration, and quality of osseointegration, making a difference in a patient’s quality of life. Bone morphogenic protein 2 (BMP-2) is a highly potent growth factor that acts as a recruiting molecule for mesenchymal stromal cells, induces a rapid differentiation of them into osteoblasts, while also maintaining their viability. Currently, the literature data shows that the liposomal direct delivery or transfection of plasmids containing BMP-2 at the bone wound site often results in the overexpression of osteogenic markers and result in enhanced mineralization with formation of new bone matrix. We reviewed the literature on the scientific data regarding BMP-2 delivery with the help of liposomes. This may provide the ground for a future new bone regeneration strategy with real chances of reaching clinical practice.

Proposal for a New Bioactive Kinetic Screw in an Implant, Using a Numerical Model

A new biomechanism, Bioactive Kinetic Screw (BKS) for screws and bone implants created by the first author, is presented using a bone dental implant screw, in which the bone particles, blood, cells, and protein molecules removed during bone drilling are used as a homogeneous autogenous transplant in the same implant site, aiming to obtain primary and secondary bone stability, simplifying the surgical procedure, and improving the healing process. The new BKS is based on complex geometry. In this work, we describe the growth factor (GF) delivery properties and the in situ optimization of the use of the GF in the fixation of bone screws through a dental implant. To describe the drilling process, an explicit dynamic numerical model was created, where the results show a significant impact of the drilling process on the bone material. The simulation demonstrates that the space occupied by the screw causes stress and deformation in the bone during the perforation and removal of the particulate bone, resulting in the accumulation of material removed within the implant screw, filling the limit hole of the drill grooves present on the new BKS.

Systematic Review of the Preclinical Technology Readiness of Orthopedic Gene Therapy and Outlook for Clinical Translation

Bone defects and improper healing of fractures are an increasing public health burden, and there is an unmet clinical need in their successful repair. Gene therapy has been proposed as a possible approach to improve or augment bone healing with the potential to provide true functional regeneration. While large numbers of studies have been performed in vitro or in vivo in small animal models that support the use of gene therapy for bone repair, these systems do not recapitulate several key features of a critical or complex fracture environment. Larger animal models are therefore a key step on the path to clinical translation of the technology. Herein, the current state of orthopedic gene therapy research in preclinical large animal models was investigated based on performed large animal studies. A summary and an outlook regarding current clinical studies in this sector are provided. It was found that the results found in the current research literature were generally positive but highly methodologically inconsistent, rendering a comparison difficult. Additionally, factors vital for translation have not been thoroughly addressed in these model systems, and the risk of bias was high in all reviewed publications. These limitations directly impact clinical translation of gene therapeutic approaches due to lack of comparability, inability to demonstrate non-inferiority or equivalence compared with current clinical standards, and lack of safety data. This review therefore aims to provide a current overview of ongoing preclinical and clinical work, potential bottlenecks in preclinical studies and for translation, and recommendations to overcome these to enable future deployment of this promising technology to the clinical setting.

The Special Developmental Biology of Craniofacial Tissues Enables the Understanding of Oral and Maxillofacial Physiology and Diseases

Maxillofacial hard tissues have several differences compared to bones of other localizations of the human body. These could be due to the different embryological development of the jaw bones compared to the extracranial skeleton. In particular, the immigration of neuroectodermally differentiated cells of the cranial neural crest (CNC) plays an important role. These cells differ from the mesenchymal structures of the extracranial skeleton. In the ontogenesis of the jaw bones, the development via the intermediate stage of the pharyngeal arches is another special developmental feature. The aim of this review was to illustrate how the development of maxillofacial hard tissues occurs via the cranial neural crest and pharyngeal arches, and what significance this could have for relevant pathologies in maxillofacial surgery, dentistry and orthodontic therapy. The pathogenesis of various growth anomalies and certain syndromes will also be discussed.

Current and future trends in periodontal tissue engineering and bone regeneration

Periodontal tissue engineering involves a multi-disciplinary approach towards the regeneration of periodontal ligament, cementum and alveolar bone surrounding teeth, whereas bone regeneration specifically applies to ridge reconstruction in preparation for future implant placement, sinus floor augmentation and regeneration of peri-implant osseous defects. Successful periodontal regeneration is based on verifiable cementogenesis on the root surface, oblique insertion of periodontal ligament fibers and formation of new and vital supporting bone. Ultimately, regenerated periodontal and peri-implant support must be able to interface with surrounding host tissues in an integrated manner, withstand biomechanical forces resulting from mastication, and restore normal function and structure. Current regenerative approaches utilized in everyday clinical practice are mainly guided tissue/bone regeneration-based. Although these approaches have shown positive outcomes for small and medium-sized defects, predictability of clinical outcomes is heavily dependent on the defect morphology and clinical case selection. In many cases, it is still challenging to achieve predictable regenerative outcomes utilizing current approaches. Periodontal tissue engineering and bone regeneration (PTEBR) aims to improve the state of patient care by promoting reconstitution of damaged and lost tissues through the use of growth factors and signaling molecules, scaffolds, cells and gene therapy. The present narrative review discusses key advancements in PTEBR including current and future trends in preclinical and clinical research, as well as the potential for clinical translatability.

A Novel Resorbable Composite Material Containing Poly(ester-co-urethane) and Precipitated Calcium Carbonate Spherulites for Bone Augmentation-Development and Preclinical Pilot Trials

Polyurethanes have the potential to impart cell-relevant properties like excellent biocompatibility, high and interconnecting porosity and controlled degradability into biomaterials in a relatively simple way. In this context, a biodegradable composite material made of an isocyanate-terminated co-oligoester prepolymer and precipitated calcium carbonated spherulites (up to 60% w/w) was synthesized and investigated with regard to an application as bone substitute in dental and orthodontic application. After foaming the composite material, a predominantly interconnecting porous structure is obtained, which can be easily machined. The compressive strength of the foamed composites increases with raising calcium carbonate content and decreasing calcium carbonate particle size. When stored in an aqueous medium, there is a decrease in pressure stability of the composite, but this decrease is smaller the higher the proportion of the calcium carbonate component is. In vitro cytocompatibility studies of the foamed composites on MC3T3-E1 pre-osteoblasts revealed an excellent cytocompatibility. The in vitro degradation behaviour of foamed composite is characterised by a continuous loss of mass, which is slower with higher calcium carbonate contents. In a first pre-clinical pilot trial the foamed composite bone substitute material (fcm) was successfully evaluated in a model of vertical augmentation in an established animal model on the calvaria and on the lateral mandible of pigs.

Surface modification of titanium with collagen/hyaluronic acid and bone morphogenetic protein 2/7 heterodimer promotes osteoblastic differentiation

The aim of this study was to evaluate the effects of a collagen/hyaluronic acid coating without or with incorporated heterodimeric bone morphogenetic protein 2/7 (BMP2/7) on in-vitro osteoblastic differentiation on titanium discs. The multilayer collagen/hyaluronic acid coatings without or without incorporated BMP2/7 were deposited on titanium discs via a layer-by-layer technique. The effects of the coatings were evaluated by assessing the alkaline phosphatase (ALP) activity (an early osteoblastic differentiation marker) and the osteocalcin expression (a late osteoblastic differentiation marker). The expression levels of the osteoblastic genes, such as alkaline phosphatase 2 (AKP2) and osteocalcin (OC) were detected using real-time RT-PCR. ALP activity and OC expression were significantly increased when cells were cultured with collagen/hyaluronic acid+BMP2/7 heterodimer (p<0.05). The same result was found in cells with the expression of a BMP2/7 fusion gene, OC and AKP2. These results indicated that collagen/hyaluronic acid+BMP2/7 heterodimer-coated discs might have the potential to greatly enhance osseointegration than a either BMP2 or BMP7 solution or a mixture of BMP2 and BMP7 BMP2/7.

Efficient Delivery of Transducing Polymer Nanoparticles for Gene-Mediated Induction of Osteogenesis for Bone Regeneration

Developing non-viral gene therapy vectors that both protect and functionally deliver nucleic acid cargoes will be vital if gene augmentation and editing strategies are to be effectively combined with advanced regenerative medicine approaches. Currently such methodologies utilize high concentrations of recombinant growth factors, which result in toxicity and off-target effects. Herein we demonstrate the use of modified cell penetrating peptides (CPPs), termed Glycosaminoglycan (GAG)-binding Enhanced Transduction (GET) peptides with plasmid DNA (pDNA) encapsulated poly (lactic-co-glycolic acid) PLGA nanoparticles (pDNA-encapsulated PLGA NPs). In order to encapsulate the pDNA, it was first condensed with a cationic low molecular weight Poly L-Lysine (PLL) into 30-60 nm NPs followed by encapsulation in PLGA NPs by double emulsion; yielding encapsulation efficiencies (EE) of ∼30%. PLGA NPs complexed with GET peptides show enhanced intracellular delivery (up to sevenfold) and transfection efficiencies (up to five orders of magnitude). Moreover, the pDNA cargo has enhanced protection from nucleases (such as DNase I) promoting their translatability. As an example, we show these NPs efficiently deliver pBMP2 which can promote osteogenic differentiation in vitro. Gene delivery to human Mesenchymal Stromal Cells (hMSCs) inducing their osteogenic programming was confirmed by Alizarin red calcium staining and bone lineage specific gene expression (Q RT-PCR). By combining simplistic and FDA-approved PLGA polymer nanotechnology with the GET delivery system, therapeutic non-viral vectors could have significant impact in future cellular therapy and regenerative medicine applications.

Osteogenic inducer sustained-release system promotes the adhesion, proliferation, and differentiation of osteoblasts on titanium surface

OBJECTIVE

Biomaterial can be locally applied to promote the osseointegration of dental implants. This study aimed to fabricate an osteogenic inducer (OI) sustained-release system and to evaluate its effects on the adhesion, proliferation, and differentiation of osteoblasts on titanium surfaces.

METHODS

First of all, different contents of OI solution were added to the poly (lactic-co-glycolic acid) (PLGA) gel individually to investigate the best physical properties and drug-release rate. Moreover, osteoblasts were isolated from the calvaria of two-month-old New Zealand rabbits through sequential enzymatic digestion. Osteoblasts were seeded onto the surface of Ti disks (control group), Ti coated with PLGA gel (PLGA group), and Ti coated with the OI sustained-release system (PLGA+OI group). Cell adhesion was observed by scanning electron microscopy. Cell proliferation was analyzed by cell counting kit-8. Cell differentiation was tested by alizarin red staining, alkaline phosphatase (ALP) activity and osteogenic-related gene expression.

RESULTS

The OI sustained-release system contained 15% OI solution had appropriate physical properties and drug-release rate. The osteoblasts in the PLGA+OI group were in a typical spindle shape with a considerable number indicating the promotion of adhesion and proliferation. The expression of early and late stage osteoblast differentiation genes in the PLGA+OI group were significantly higher than that of the control group and PLGA group at each time point. The PLGA group showed accelerated adhesion and differentiation but reduced proliferation compared with the control.

CONCLUSION

The OI sustained-release system promotes the adhesion, proliferation, and differentiation of osteoblasts on titanium surfaces. This system is a cost-effective osteoconductive biomaterial that might be promising for use in dental implantation.

A new standardized critical size bone defect model in the pig forehead for comparative testing of bone regeneration materials

OBJECTIVES

The preclinical study aimed to establish a standardized preclinical model to investigate osseous graft consolidation in defect configurations of limited regenerative capacity.

MATERIAL AND METHODS

Critical size defects (CSD) were prepared and titanium tubes inserted for defect separation from local bone in the forehead area of 18 pigs. Defects were filled with demineralized bovine bone mineral (DBBM) or served as empty controls and were covered with a resorbable collagen membrane (CM) or left untreated. Six randomly selected pigs were sacrificed after 4, 8 and 12 weeks. Specimens were histologically and histomorphometrically analysed focusing on newly formed bone (NFB), demineralized bovine bone mineral (DBBM) and soft tissue (ST) proportions.

RESULTS

Four weeks after defect preparation, no statistically significant difference concerning NFB quantity could be detected within the groups. Defects covered with the CM showed lower amounts of DBBM. After 6 and 12 weeks, defects augmented with DBBM in combination with a CM (8 weeks: 43.12 ± 4.31; 12 weeks: 43.05 ± 3.01) showed a statistically significant higher NFB rate compared to empty control defects covered with 8 weeks: 7.66 ± 0.59; 12 weeks or without a CM; 8 weeks: 8.62 ± 2.66; 12 weeks: 18.40 ± 2.40. CM application showed no significant impact on osseous defect regeneration or soft tissue formation. Superior NFB could be detected for basal aspect for several evaluation time points.

CONCLUSIONS

The modification of CSD with titanium tubes represents a suitable model to imitate a one-wall defect regeneration situation.

CLINICAL RELEVANCE

The established model represents a promising method to evaluate graft consolidation in one-wall defect configuration.

Periosteal elevation induces supracortical peri-implant bone formation

PURPOSE

The aim of the study was to evaluate the possibility of supracortical peri-implant bone formation after periosteal elevation.

MATERIALS AND METHODS

Periosteal elevation with an elevation height of 5 or 10 mm was performed in an animal experiment with 24 female domestic pigs. For this purpose, four implants were inserted in the frontal bone of each animal. The implants protruded from the local bone by 5 or 10 mm. In the test groups, the periosteum was attached to the protruding implants. In the control groups, the implants were covered with biocompatible degradable periosteal-shielding devices. Each 8 animals were sacrificed after 20, 40 and 60 days. De novo bone formation was evaluated radiographically and histologically.

RESULTS

Bone formation rate was higher in the test groups compared to the control groups after 20, 40 and 60 days. After 40 and 60 days, a statistically significant higher (P < 0.01) bone formation rate was found for both elevation heights. The maximum height of the generated bone was statistically significantly higher (P < 0.01) in the test groups for both elevation heights, compared to the control groups for all time points investigated.

CONCLUSION

Periosteal elevation by dental implants is a treatment option for supracortical peri-implant bone formation.

Delivering Nucleic-Acid Based Nanomedicines on Biomaterial Scaffolds for Orthopedic Tissue Repair: Challenges, Progress and Future Perspectives

As well as acting to fill defects and allow for cell infiltration and proliferation in regenerative medicine, biomaterial scaffolds can also act as carriers for therapeutics, further enhancing their efficacy. Drug and protein delivery on scaffolds have shown potential, however, supraphysiological quantities of therapeutic are often released at the defect site, causing off-target side effects and cytotoxicity. Gene therapy involves the introduction of foreign genes into a cell in order to exert an effect; either replacing a missing gene or modulating expression of a protein. State of the art gene therapy also encompasses manipulation of the transcriptome by harnessing RNA interference (RNAi) therapy. The delivery of nucleic acid nanomedicines on biomaterial scaffolds - gene-activated scaffolds -has shown potential for use in a variety of tissue engineering applications, but as of yet, have not reached clinical use. The current state of the art in terms of biomaterial scaffolds and delivery vector materials for gene therapy is reviewed, and the limitations of current procedures discussed. Future directions in the clinical translation of gene-activated scaffolds are also considered, with a particular focus on bone and cartilage tissue regeneration.

Effects of Osseointegration by Bone Morphogenetic Protein-2 on Titanium Implants In Vitro and In Vivo

This study designed a biomimetic implant for reducing healing time and achieving early osseointegration to create an active surface. Bone morphogenetic protein-2 (BMP-2) is a strong regulator protein in osteogenic pathways. Due to hardly maintaining BMP-2 biological function and specificity, BMP-2 efficient delivery on implant surfaces is the main challenge for the clinic application. In this study, a novel method for synthesizing functionalized silane film for superior modification with BMP-2 on titanium surfaces is proposed. Three groups were compared with and without BMP-2 on modified titanium surfaces in vitro and in vivo: mechanical grinding; electrochemical modification through potentiostatic anodization (ECH); and sandblasting, alkali heating, and etching (SMART). Cell tests indicated that the ECH and SMART groups with BMP-2 markedly promoted D1 cell activity and differentiation compared with the groups without BMP-2. Moreover, the SMART group with a BMP-2 surface markedly promoted early alkaline phosphatase expression in the D1 cells compared with the other surface groups. Compared with these groups in vivo, SMART silaning with BMP-2 showed superior bone quality and created contact areas between implant and surrounding bones. The SMART group with BMP-2 could promote cell mineralization in vitro and osseointegration in vivo, indicating potential clinical use.

Enhanced Osteogenesis by Reduced Graphene Oxide/Hydroxyapatite Nanocomposites

Recently, graphene-based nanomaterials, in the form of two dimensional substrates or three dimensional foams, have attracted considerable attention as bioactive scaffolds to promote the differentiation of various stem cells towards specific lineages. On the other hand, the potential advantages of using graphene-based hybrid composites directly as factors inducing cellular differentiation as well as tissue regeneration are unclear. This study examined whether nanocomposites of reduced graphene oxide (rGO) and hydroxyapatite (HAp) (rGO/HAp NCs) could enhance the osteogenesis of MC3T3-E1 preosteoblasts and promote new bone formation. When combined with HAp, rGO synergistically promoted the spontaneous osteodifferentiation of MC3T3-E1 cells without hindering their proliferation. This enhanced osteogenesis was corroborated from determination of alkaline phosphatase activity as early stage markers of osteodifferentiation and mineralization of calcium and phosphate as late stage markers. Immunoblot analysis showed that rGO/HAp NCs increase the expression levels of osteopontin and osteocalcin significantly. Furthermore, rGO/HAp grafts were found to significantly enhance new bone formation in full-thickness calvarial defects without inflammatory responses. These results suggest that rGO/HAp NCs can be exploited to craft a range of strategies for the development of novel dental and orthopedic bone grafts to accelerate bone regeneration because these graphene-based composite materials have potentials to stimulate osteogenesis.

Ordinary and Activated Bone Grafts: Applied Classification and the Main Features

Bone grafts are medical devices that are in high demand in clinical practice for substitution of bone defects and recovery of atrophic bone regions. Based on the analysis of the modern groups of bone grafts, the particularities of their composition, the mechanisms of their biological effects, and their therapeutic indications, applicable classification was proposed that separates the bone substitutes into “ordinary” and “activated.” The main differential criterion is the presence of biologically active components in the material that are standardized by qualitative and quantitative parameters: growth factors, cells, or gene constructions encoding growth factors. The pronounced osteoinductive and (or) osteogenic properties of activated osteoplastic materials allow drawing upon their efficacy in the substitution of large bone defects.

Evaluation of fibrin-based gene-activated matrices for BMP2/7 plasmid codelivery in a rat nonunion model

PURPOSE

Treatment of large-segmental bone defects still is a challenge in clinical routine. Application of gene-activated matrices (GAMs) based on fibrin, bone morphogenic protein (BMP) 2/7 plasmids and nonviral transfection reagents (cationic polymers) could be an innovative treatment strategy to overcome this problem. The aim of this study was to determine the therapeutic efficacy of fibrin GAMs with or without additional transfection reagents for BMP2 and 7 plasmid codelivery in a femur nonunion rat model.

METHODS

In this experimental study, a critical-sized femoral defect was created in 27 rats. At four weeks after the surgery, animals were separated into four groups and underwent a second operation. Fibrin clots containing BMP2/7 plasmids with and without cationic polymer were implanted into the femoral defect. Fibrin clots containing recombinant human (rh) BMP2 served as positive and clots without supplement as negative controls.

RESULTS

At eight weeks, animals that received GAMs containing the cationic polymer and BMP2/7 plasmids showed decreased bone volume compared with animals treated with GAMs and BMP2/7 only. Application of BMP2/7 plasmids in fibrin GAMs without cationic polymer led to variable results. Animals that received rhBMP2 protein showed increased bone volume, and osseous unions were achieved in two of six animals.

CONCLUSIONS

Cationic polymers decrease therapeutic efficiency of fibrin GAM-based BMP2/7 plasmid codelivery in bone regeneration. Nonviral gene transfer of BMP2/7 plasmids needs alternative promoters (e.g. by sonoporation, electroporation) to produce beneficial clinical effects.

Bone formation in peri-implant defects grafted with microparticles: a pilot animal experimental study

AIM

This study aimed to evaluate the healing of peri-implant defects grafted with microparticles (MPs).

MATERIAL AND METHODS

Six domestic pigs received nine standardized defects at the calvaria, and an implant was inserted in the middle of each defect. The space between the implant and lateral bone portion was filled with MP pellets (n = 18) or MP supernatant (n = 18) or left unfilled (n = 18). After 14 and 28 days, three animals were sacrificed and specimens removed for further processing. Samples were microradiographically and histologically analysed. In addition, we immunohistochemically stained for anti-vWF as a marker of angiogenesis.

RESULTS

In the case of bone regeneration and vessel formation, the null hypothesis can be partially rejected. After 14 and 28 days, no significant difference was observed within groups regarding de novo bone formation, bone density and osseointegration. However, superior vessel formation was found at both time points.

CONCLUSION

Microparticles represent a promising treatment option to accelerate peri-implant vessel formation. Further studies are needed to investigate the regenerative properties of MPs more precisely.

A novel one-pot process for near-net-shape fabrication of open-porous resorbable hydroxyapatite/protein composites and in vivo assessment

We present a mild one-pot freeze gelation process for fabricating near-net, complex-shaped hydroxyapatite scaffolds and to directly incorporate active proteins during scaffold processing. In particular, the direct protein incorporation enables a simultaneous adjustment and control of scaffold microstructure, porosity, resorbability and enhancement of initial mechanical and handling stability. Two proteins, serum albumin and lysozyme, are selected and their effect on scaffold stability and microstructure investigated by biaxial strength tests, electron microscopy, and mercury intrusion porosimetry. The resulting hydroxyapatite/protein composites feature adjustable porosities from 50% to 70% and a mechanical strength ranging from 2 to 6 MPa comparable to that of human spongiosa without any sintering step. Scaffold degradation behaviour and protein release are assessed by in vitro studies. A preliminary in vivo assessment of scaffold biocompatibility and resorption behaviour in adult domestic pigs is discussed. After implantation, composites were resorbed up to 50% after only 4 weeks and up to 65% after 8 weeks. In addition, 14% new bone formation after 4 weeks and 37% after 8 weeks were detected. All these investigations demonstrate the outstanding suitability of the one-pot-process to create, in a customisable and reliable way, biocompatible scaffolds with sufficient mechanical strength for handling and surgical insertion, and for potential use as biodegradable bone substitutes and versatile platform for local drug delivery.

Nonviral gene transfer strategies to promote bone regeneration

Despite the inherent ability of bone to regenerate itself, there are a number of clinical situations in which complete bone regeneration fails to occur. In view of shortcomings of conventional treatment, gene therapy may have a place in cases of critical-size bone loss that cannot be properly treated with current medical or surgical treatment. The purpose of this review is to provide an overview of gene therapy in general, nonviral techniques of gene transfer including physical and chemical methods, RNA-based therapy, therapeutic genes to be transferred for bone regeneration, route of application including ex vivo application, and direct gene therapy approaches to regenerate bone.

Implants in bone: part I. A current overview about tissue response, surface modifications and future perspectives

PURPOSE

The aim of study paper is to present an overview of osseointegration of dental implants, focusing on tissue response, surface modifications and future perspective.

DISCUSSION

Great progress has been made over the decades in the understanding of osseous peri-implant healing of dental implants, leading to the development of new implant materials and surfaces. However, failures and losses of implants are an indicator that there is room for improvement. Of particular importance is the understanding of the biological interaction between the implant and its surrounding bone.

CONCLUSION

The survival rates of dental implants in bone of over 90 % after 10 years show that they are an effective and well-established therapy option. However, new implant materials and surface modifications may be able to improve osseointegration of medical implants especially when the wound healing is compromised. Advanced techniques of evaluation are necessary to understand and validate osseointegration in these cases. An overview regarding the current state of the art in experimental evaluation of osseointegration of implants and implant material modifications will be given in Part II.

Bone response to biomimetic implants delivering BMP-2 and VEGF: an immunohistochemical study

This animal study evaluated bone healing around titanium implant surfaces biomimetically coated with bone morphogenic protein-2 (BMP-2) and/or vascular endothelial growth factor (VEGF) by examining bone matrix proteins and mineralisation. Five different implant surfaces were established: acid-etched surface (AE), biomimetic calcium phosphate surface (CAP), BMP-2 loaded CAP surface, VEGF loaded CAP surface and dual BMP-2 + VEGF loaded CAP surface. The implants were inserted into calvariae of adult domestic pigs. For the comparison of osteoconductive capacity of each surface, bone mineral density and expression of bone matrix proteins (collagen I, BMP-2/4, osteocalcin and osteopontin) inside defined chambers around the implant were assessed using light microscopy and microradiography and immunohistochemical analysis at 1, 2 and 4 weeks. In the both groups delivering BMP-2, the bone mineral density was significantly enhanced after 2 weeks and the highest value was measured for the group BMP + VEGF. In the group VEGF, collagen I and BMP-2/4 expressions were significantly up-regulated at the first and second weeks. The percentage of BMP-2/4 positive cells in the group BMP + VEGF was significantly enhanced compared with the groups AE and CAP at the second week. Although the highest osteocalcin and osteopontin expression values were observed for the group BMP + VEGF after 2 weeks, no statistically significant difference in osteocalcin and osteopontin expressions was found between all groups at any time. It was concluded that combined delivery of BMP-2 and VEGF favoured bone mineralisation and expression of important bone matrix proteins that might explain synergistic interaction between both growth factors.

Systematic review of pre-clinical models assessing implant integration in locally compromised sites and/or systemically compromised animals

OBJECTIVE

The aim was to systematically search the dental literature for pre-clinical models assessing implant integration in locally compromised sites (part 1) and systemically compromised animals (part 2), and to evaluate the quality of reporting of included publications.

METHODS

A Medline search (1966-2011) was performed, complimented by additional hand searching. The quality of reporting of the included publications was evaluated using the 20 items of the ARRIVE (Animals in Research In Vivo Experiments) guidelines.

RESULTS

One-hundred and seventy-six (part 1; mean ARRIVE score = 15.6 ± 2.4) and 104 (part 2; 16.2 ± 1.9) studies met the inclusion criteria. The overall mean score for all included studies amounted to 15.8 ± 2.2. Housing (38.3%), allocation of animals (37.9%), numbers analysed (50%) and adverse events (51.4%) of the ARRIVE guidelines were the least reported. Statistically significant differences in mean ARRIVE scores were found depending on the publication date (p < 0.05), with the highest score of 16.7 ± 1.6 for studies published within the last 2 years.

CONCLUSIONS

A large number of studies met the inclusion criteria. The ARRIVE scores revealed heterogeneity and missing information for selected items in more than 50% of the publications. The quality of reporting shifted towards better-reported pre-clinical trials within recent years.

The pig as an experimental model for clinical craniofacial research

The pig represents a useful, large experimental model for biomedical research. Recently, it has been used in different areas of biomedical research. The aim of this study was to review the basic anatomical structures of the head region in the pig in relation to their use in current research. Attention was focused on the areas that are frequently affected by pathological processes in humans: the oral cavity with teeth, salivary gland, orbit, nasal cavity and paranasal sinuses, maxilla, mandible and temporomandibular joint. Not all of the structures have an equal morphology in the pig and human, and these morphological dissimilarities must be taken into account before choosing the pig as an experimental model for regenerative medicine.

Critical size defect regeneration using PEG-mediated BMP-2 gene delivery and the use of cell occlusive barrier membranes - the osteopromotive principle revisited

OBJECTIVE

The objective of this study was to investigate if osseous regeneration can be accelerated by involvement of periosteal tissue. Bone defect regeneration could be accelerated by the involvement of periosteal tissue if osteogenic cell signalling is maintained within the defect. It was questioned if local cell-mediated BMP-2 gene delivery makes a cell occlusive membrane dispensable during bone critical size defect regeneration.

METHODS

PEG matrix (degradation time 10 days) and PEG membrane (degradation time 120 days) were used in the pig calvarial model. Cylindrical (1 × 1 cm) critical size defects (CSD) (9 per animal; 20 animals) were filled with: (i) particulated autologous bone, covered with PEG membrane (group 1); (ii) HA/TCP, covered with PEG membrane (group 2); (iii) HA/TCP, mixed with PEG matrix (group 3); and (iv) HA/TCP mixed with BMP-2-transfected osteoblasts and PEG matrix (group 4). BMP-2/4 gene transfer: liposomal in vitro transfection of BMP-2/V5-tag fusion-protein. Quantitative histomorphometry (toluidine blue staining) after 2, 4 and 12 weeks assessed bone formation. Semiquantitative immunohistochemistry estimated the expression of BMP-2, V5-tag, Runx-2 and Sox9.

RESULTS

PEG matrix embedded BMP-2 expressing cells presented higher bone formation (P < 0.05) than HA/TCP + PEG matrix defect filling or PEG membrane covering (HA/TCP filling) after 12 weeks. Highest expression of BMP-2, Runx-2 and lowest expression of fibrous tissue marker Sox9 was seen in the BMP-2 group.

CONCLUSION

PEG matrix embedded BMP-2 expressing cells are capable to maintain osteogenic signalling and to accelerate osseous defect regeneration in absence of a cell occlusive membrane.

PEG matrix enables cell-mediated local BMP-2 gene delivery and increased bone formation in a porcine critical size defect model of craniofacial bone regeneration

PURPOSE

This study addressed the suitability of a polyethylene glycol (PEG) matrix as scaffold for cell-mediated local BMP-2 gene transfer in a calvarial critical size defect (CSD) model.

MATERIALS AND METHODS

PEG matrix (degradation time 10 days) and PEG membrane (degradation time 120 days) were used in the pig calvarial model. Cylindrical (1 × 1 cm) CSD (9 per animal; 20 animals) were filled with: (i) HA/TCP, covered by PEG membrane (group 1); (ii) HA/TCP, mixed with PEG matrix (group 2); and (iii) HA/TCP mixed with BMP-2 transfected osteoblasts and PEG matrix (group 3). BMP-2/4 gene transfer: liposomal in vitro transfection of BMP-2/V5-tag fusion-protein. Quantitative histomorphometry (toluidine blue staining) after 2, 4 and 12 weeks assessed bone formation. Semiquantitative immunohistochemistry estimated the expression of BMP-2 and V5-tag.

RESULTS

Group 3 showed significantly higher new bone formation than groups 1, 2 at 4 (P < 0.05) and 12 (P < 0.02) weeks. BMP-2-V5-tag was detected for 4 weeks. BMP-2 expression in group 3 was higher compared to all other groups after 2 and 4 (P < 0.02) weeks.

CONCLUSIONS

The PEG matrix serves as scaffold for cell-mediated BMP-2 gene delivery in guided bone regeneration facilitating cell survival and protein synthesis for at least 4 weeks. Local BMP-2 gene delivery by PEG matrix-embedded cells leads to increased bone formation during critical size defect regeneration.

Osseointegration of SLActive implants in diabetic pigs

OBJECTIVES

Diabetes mellitus is currently classified as a relative contraindication for implant treatment because of microangiopathies with the consequence of impaired bone regeneration and higher rates of implant failure. The study aim was to investigate peri-implant bone formation in a diabetic animal model in comparison to healthy animals and to evaluate the differences between conventional (SLA(®) ) and modified (SLActive(®) ) titanium implant surfaces on osseointegration.

MATERIAL AND METHODS

Each six implants were placed in the calvaria of 11 diabetic and 4 healthy domestic pigs. At 30 and 90 days after implant placement, the bone-to-implant contact (BIC) and bone density (BD) were appraised. Additionally, the expression of the bone-matrix proteins collagen type I and osteocalcin was evaluated at both points in time by using immunohistochemical staining methods.

RESULTS

Overall, BIC was reduced in the diabetic group at 30 and 90 days. After 90 days, the SLActive(®) implants showed significantly higher BICs compared with the SLA(®) implants in diabetic animals. Peri-implant BD was higher in the SLActive(®) group at 30 and 90 days in healthy and diabetic animals. Collagen type I protein expression was higher using SLA(®) implants in diabetic pigs at 30 days. Values for osteocalcin expression were not consistent.

CONCLUSIONS

The results indicate the negative effect of untreated diabetes mellitus on early osseointegration of dental implants. The modified SLA(®) surface (SLActive(®) ) elicited an accelerated osseointegration of dental implants, suggesting that a better prognosis for implant treatment of diabetic patients is possible.

The evaluation of the correlation between histomorphometric analysis and micro-computed tomography analysis in AdBMP-2 induced bone regeneration in rat calvarial defects

PURPOSE

Micro-computed tomography (micro-CT) has been widely used in the evaluation of regenerated bone tissue but the reliability of micro-CT has not yet been established. This study evaluated the correlation between histomorphometric analysis and micro-CT analysis in performing new bone formation measurement.

METHODS

Critical-size calvarial defects were created using a 8 mm trephine bur in a total of 24 Sprague-Dawley rats, and collagen gel mixed with autogenous rat bone marrow stromal cells (BMSCs) or autogenous rat BMSCs transduced by adenovirus containing bone morphogenic protein-2 (BMP-2) genes was loaded into the defect site. In the control group, collagen gel alone was loaded into the defect. After 2 and 4 weeks, the animals were euthanized and calvaria containing defects were harvested. Micro-CT analysis and histomorphometric analysis of each sample were accomplished and the statistical evaluation about the correlation between both analyses was performed.

RESULTS

New bone formation of the BMP-2 group was greater than that of the other groups at 2 and 4 weeks in both histomorphometric analysis and micro-CT analysis (P=0.026, P=0.034). Histomorphometric analysis of representative sections showed similar results to histomorphometric analysis with a mean value of 3 sections. Measurement of new bone formation was highly correlated between histomorphometric analysis and micro-CT analysis, especially at the low lower threshold level at 2 weeks (adjusted r(2)=0.907, P<0.001). New bone formation of the BMP-2 group analyzed by micro-CT tended to decline sharply with an increasing lower threshold level, and it was statistically significant (P<0.001).

CONCLUSIONS

Both histomorphometric analysis and micro-CT analysis were valid methods for measurement of the new bone in rat calvarial defects and the ability to detect the new bone in micro-CT analysis was highly influenced by the threshold level in the BMP-2 group at early stage.

The effect of combined delivery of recombinant human bone morphogenetic protein-2 and recombinant human vascular endothelial growth factor 165 from biomimetic calcium-phosphate-coated implants on osseointegration

OBJECTIVES

The delivery of growth factors for enhanced osseointegration depends on the effectiveness of the carrier systems at the bone-implant interface. This study evaluated the effect of solo and dual delivery of recombinant human bone morphogenetic protein-2 (rhBMP-2) and recombinant human vascular endothelial growth factor (rhVEGF(165) ) from biomimetically octacalcium phosphate-coated implants on osseointegration.

MATERIALS AND METHODS

Biomimetic implants, bearing either a single growth factor (BMP or VEGF) or their combination (BMP+VEGF), were established, and compared with acid-etched (AE, control) and biomimetic implants without growth factor (CAP). Implants were placed into frontal skulls of nine domestic pigs. The quality of osseointegration was evaluated using microradiographic and histomorphometric analysis of bone formation inside four defined bone chambers of the experimental implant at 1, 2 and 4 weeks.

RESULTS

Biomimetic implants, either with or without growth factor, showed enhanced bone volume density (BVD) values after 2 and 4 weeks. This enhancement was significant for the BMP and BMP+VEGF group compared with the control AE group after 2 weeks (P<0.05). All biomimetic calcium-phosphate (Ca-P) coatings exhibited significantly enhanced bone-implant contact (BIC) rates compared with the uncoated control surface after 2 weeks (P<0.05). However, the combined delivery of BMP-2 and VEGF did not significantly enhance BIC at the final observation period.

CONCLUSION

It was concluded that the combined delivery of BMP-2 and VEGF enhances BVD around implants, but not BIC. Therefore, it may be assumed that changes in the surface characteristics should be considered when designing growth factor-delivering surfaces.

Effects of growth hormone on initial bone formation around dental implants: a dog study

OBJECTIVE

The aim of this study was to evaluate the effects of topical application of growth hormone (GH) on the osteointegration of dental implants in dogs at 5 and 8 weeks after surgery.

MATERIALS AND METHODS

Mandibular premolars and molars were extracted from 12 Beagle dogs. Four screw implants were placed in each mandible. Before implant placement, 4 IU of GH were applied to the test sites (TS); no treatment was applied to control sites (CS). Morphometric parameters, bone-to-implant contact (BIC), peri-implant connective tissue, interthread bone and newly formed bone were measured. The Student's t-test for was used for statistical analysis of data obtained.

RESULTS

After 5 weeks of treatment, BIC values varied slightly between 34.33 ± 2.35% (CS) and 35.76 ± 2.96% (TS). Interthread bone tissue was 64.08 ± 8.68 at CS and 72.86 ± 2.93 at TS, with statistical significance (P<0.05). Bone neoformation was 72.53 ± 4.54 at the CS and 80.74 ± 1.65 for the GH group, these being statistically significant differences (P<0.05). After 8 weeks, BIC had slightly increased for the GH group (36.47 ± 3.09 vs. 39.61 ± 2.34). Interthread bone was 80.57 ± 2.28 at the CS and 82.58 ± 2.44 at the GH site, which was statistically significant. Bone neoformation was 88.09 ± 1.38 at CS and 91.01 ± 1.52 at TS, showing statistical significance (P<0.05).

CONCLUSION

Topical application of 4 IU of GH like a biomimetic agent at the moment of implant placement has no significant effects on the BIC at 5 and 8 weeks, although bone neoformation and inter-thread bone values did increase significantly.

Establishment of a streptozotocin-induced diabetic domestic pig model and a systematic evaluation of pathological changes in the hard and soft tissue over a 12-month period

OBJECTIVE

The number of diabetic patients in need of medical treatment is growing steadily. Therefore, a diabetic animal model with high degree of similarities with humans, which is suitable for the systematic evaluation of biomaterials and medical devices, is needed.

MATERIALS AND METHODS

Twenty domestic pigs were used for the study. Fifteen received Streptozotocin (STZ) to induce diabetes mellitus. Internal parameters were measured and bone as well as soft tissues biopsies were taken after 0, 6 and 12 months and evaluated qualitatively and quantitatively by means of scanning electronic microscopy, light microscopy and microradiography.

RESULTS

The results of the clinical internal parameters, determined by the American Diabetes Association for the definition of diabetes mellitus could be fulfilled. Pathological changes of the skin vasculatures were already visible after 6 months with a significant wall thickening in the diabetic group. The bone mineralization was lower in the diabetic group after 6 months and with a significant difference after 12 months.

CONCLUSION

From the present results, it can be concluded that a STZ dosage of 90 mg/kg body weight in the domestic pig is suitable for the induction of an apparent diabetes, leading to histolopathological changes in the hard and soft tissues already after 6 months. The high degree of similarities with humans makes it an interesting diabetic animal model for biomaterial research in a compromised animal model.

Biofunctionalization of titanium implants with a biomimetic active peptide (P-15) promotes early osseointegration

OBJECTIVES

The early stages of peri-implant bone formation play an essential role in the osseointegration and long-term success of dental implants. By incorporating bioactive coatings, this biofunctionalization of implant surfaces may enhance the attachment of the implant to the surrounding bone and stimulate bone regeneration.

MATERIAL AND METHODS

To demonstrate faster osseointegration, the surfaces of dental implants were grit-blasted and acid-etched. They were then coated with hydroxyapatite (HA) and experimental implants were further coated with a biomimetic active peptide (P-15) in one of two concentrations. These biofunctionalized samples and controls with no peptide were placed in the forehead region of 12 adult pigs. Six animals were evaluated for a period of 14 or 30 days.

RESULTS

Histomorphometric analysis demonstrated that the implants with the high concentration of P-15 had significantly higher percentage of bone-to-implant contact (BIC) at 14 (P=0.018) and 30 (P=0.015) days compared with the other groups. Both concentrations of P-15 showed increased peri-implant bone density compared to the control group at 30 days.

CONCLUSION

Biofunctionalization of the implant surface with a biomimetic active peptide leads to significantly increased BIC rates at 14 and 30 days and higher peri-implant bone density at 30 days.

Direct gene therapy for bone regeneration: gene delivery, animal models, and outcome measures

While various problems with bone healing remain, the greatest clinical change is the absence of an effective approach to manage large segmental defects in limbs and craniofacial bones caused by trauma or cancer. Thus, nontraditional forms of medicine, such as gene therapy, have been investigated as a potential solution. The use of osteogenic genes has shown great potential in bone regeneration and fracture healing. Several methods for gene delivery to the fracture site have been described. The majority of them include a cellular component as the carrying vector, an approach known as cell-mediated gene therapy. Yet, the complexity involved with cell isolation and culture emphasizes the advantages of direct gene delivery as an alternative strategy. Here we review the various approaches of direct gene delivery for bone repair, the choice of animal models, and the various outcome measures required to evaluate the efficiency and safety of each technique. Special emphasis is given to noninvasive, quantitative, in vivo monitoring of gene expression and biodistribution in live animals. Research efforts should aim at inducing a transient, localized osteogenic gene expression within a fracture site to generate an effective therapeutic approach that would eventually lead to clinical use.