Adsorption and interactions of dentine phosphoprotein with hydroxyapatite and collagen

Research progress of biomimetic materials in oral medicine

Biomimetic materials are able to mimic the structure and functional properties of native tissues especially natural oral tissues. They have attracted growing attention for their potential to achieve configurable and functional reconstruction in oral medicine. Though tremendous progress has been made regarding biomimetic materials, significant challenges still remain in terms of controversy on the mechanism of tooth tissue regeneration, lack of options for manufacturing such materials and insufficiency of in vivo experimental tests in related fields. In this review, the biomimetic materials used in oral medicine are summarized systematically, including tooth defect, tooth loss, periodontal diseases and maxillofacial bone defect. Various theoretical foundations of biomimetic materials research are reviewed, introducing the current and pertinent results. The benefits and limitations of these materials are summed up at the same time. Finally, challenges and potential of this field are discussed. This review provides the framework and support for further research in addition to giving a generally novel and fundamental basis for the utilization of biomimetic materials in the future.

Amelotin Promotes Mineralization and Adhesion in Collagen-Based Systems

Introduction

Periodontitis is characterized by the destruction of tooth-supporting tissues including the alveolar bone. Barrier membranes are used in dentistry for tissue regenerative therapy. Nevertheless, conventional membranes have issues related to membrane stability and direct induction of bone mineralization. Amelotin (AMTN), an enamel matrix protein, regulates hydroxyapatite crystal nucleation and growth. To apply an AMTN membrane in clinical practice, we investigated the mineralizing and adhesive effects of recombinant human (rh) AMTN in vitro using a collagen-based system.

Methods

Collagen hydrogel incorporated with rhAMTN (AMTN gel) and rhAMTN-coated dentin slices were prepared. AMTN gel was then applied on a commercial membrane (AMTN membrane). Samples were incubated for up to 24 h in mineralization buffer, and the structures were observed. The peak adhesive tensile strength between the dentin and AMTN membrane was measured. Using an enzyme-linked immunosorbent assay, the release kinetics of rhAMTN from the membrane were investigated.

Results

The AMTN gel resulted in the formation of hydroxyapatite deposits both onto and within the collagen matrix. Furthermore, coating the dentin surface with rhAMTN promoted the precipitation of mineral deposits on the surface. Interestingly, site-specific mineralization was observed in the AMTN membrane. Only 1% of rhAMTN was released from the membrane. Hence, the AMTN membrane adhered to the dentin surface with more than twofold greater tensile strength than that detected for a rhAMTN-free barrier membrane.

Conclusions

RhAMTN can accelerate mineralization and adhesion in collagen-based systems. Furthermore, the AMTN membrane could inform the optimal design of calcified tissue regenerative materials.

Supplementary Information

The online version contains supplementary material available at 10.1007/s12195-022-00722-2.

Advances in biomineralization-inspired materials for hard tissue repair

Biomineralization is the process by which organisms form mineralized tissues with hierarchical structures and excellent properties, including the bones and teeth in vertebrates. The underlying mechanisms and pathways of biomineralization provide inspiration for designing and constructing materials to repair hard tissues. In particular, the formation processes of minerals can be partly replicated by utilizing bioinspired artificial materials to mimic the functions of biomolecules or stabilize intermediate mineral phases involved in biomineralization. Here, we review recent advances in biomineralization-inspired materials developed for hard tissue repair. Biomineralization-inspired materials are categorized into different types based on their specific applications, which include bone repair, dentin remineralization, and enamel remineralization. Finally, the advantages and limitations of these materials are summarized, and several perspectives on future directions are discussed.

Effects of DSPP Gene Mutations on Periodontal Tissues

Dentin sialophosphoprotein ( DSPP ) gene mutations cause autosomal dominantly inherited diseases. DSPP gene mutations lead to abnormal expression of DSPP, resulting in a series of histological, morphological, and clinical abnormalities. A large number of previous studies demonstrated that DSPP is a dentinal-specific protein, and DSPP gene mutations lead to dentin dysplasia and dentinogenesis imperfecta. Recent studies have found that DSPP is also expressed in bone, periodontal tissues, and salivary glands. DSPP is involved in the formation of the periodontium as well as tooth structures. DSPP deficient mice present furcation involvement, cementum, and alveolar bone defect. We speculate that similar periodontal damage may occur in patients with DSPP mutations. This article reviewed the effects of DSPP gene mutations on periodontal status. However, almost all of the research is about animal study, there is no evidence that DSPP mutations cause periodontium defects in patients yet. We need to conduct systematic clinical studies on DSPP mutation families in the future to elucidate the effect of DSPP gene on human periodontium.

Re-Evaluation of Initial Bone Mineralization from an Engineering Perspective

Bone regeneration was one of the earliest fields to develop in the context of tissue regeneration, and currently, repair of small-sized bone defects has reached a high success rate. Future researches are expected to incorporate more advanced techniques toward achieving rapid bone repair and modulation of the regenerated bone quality. For these purposes, it is important to have a more integrative understanding of the mechanisms of bone formation and maturation from multiple perspectives and to incorporate these new concepts into the development and designing of novel materials and techniques for bone regeneration. This review focuses on the analysis of the earliest stages of bone tissue development from the biology, material science, and engineering perspectives for a more integrative understanding of bone formation and maturation, and for the development of novel biology-based engineering approaches for tissue synthesis in vitro. More specifically, the authors describe the systematic methodology that allowed the understanding of the different nucleation sites in intramembranous and endochondral ossification, the space-making process for mineral formation and growth, as well as the process of apatite crystal cluster growth in vivo in the presence of suppressing biomolecules.

Modulation of biomimetic mineralization of collagen by soluble ectodomain of discoidin domain receptor 2

Collagen fibrils serve as the major template for mineral deposits in both biologically derived and engineered tissues. In recent years certain non-collagenous proteins have been elucidated as important players in differentially modulating intra vs. extra-fibrillar mineralization of collagen. We and others have previously shown that the expression of the collagen receptor, discoidin domain receptor 2 (DDR2) positively correlates with matrix mineralization. The objective of this study was to examine if the ectodomain (ECD) of DDR2 modulates intra versus extra-fibrillar mineralization of collagen independent of cell-signaling. For this purpose, a decellularized collagenous substrate, namely glutaraldehyde fixed porcine pericardium (GFPP) was subjected to biomimetic mineralization protocols. GFPP was incubated in modified simulated body fluid (mSBF) or polymer-induced liquid precursor (PILP) solutions in the presence of recombinant DDR2 ECD (DDR2-Fc) to mediate extra or intra-fibrillar mineralization of collagen. Thermogravimetric analysis revealed that DDR2-Fc increased mineral content in GFPP calcified in mSBF while no significant differences were observed in PILP mediated mineralization. Electron microscopy approaches were used to evaluate the quality and quantity mineral deposits. An increase in the matrix to mineral ratio, frequency of particles and size of mineral deposits was observed in the presence of DDR2-Fc in mSBF. Von Kossa staining and immunohistochemistry analysis of adjacent sections indicated that DDR2-Fc bound to both the matrix and mineral phase of GFPP. Further, DDR2-Fc was found to bind to hydroxyapatite (HAP) particles and enhance the nucleation of mineral deposits in mSBF solutions independent of collagen. Taken together, our results elucidate DDR2 ECD as a novel player in the modulation of extra-fibrillar mineralization of collagen.

Dentin Phosphoprotein Mimetic Peptide Nanofibers Promote Biomineralization

Dentin phosphoprotein (DPP) is a major component of the dentin matrix playing crucial role in hydroxyapatite deposition during bone mineralization, making it a prime candidate for the design of novel materials for bone and tooth regeneration. The bioactivity of DPP-derived proteins is controlled by the phosphorylation and dephosphorylation of the serine residues. Here an enzyme-responsive peptide nanofiber system inducing biomineralization is demonstrated. It closely emulates the structural and functional properties of DPP and facilitates apatite-like mineral deposition. The DPP-mimetic peptide molecules self-assemble through dephosphorylation by alkaline phosphatase (ALP), an enzyme participating in tooth and bone matrix mineralization. Nanofiber network formation is also induced through addition of calcium ions. The gelation process following nanofiber formation produces a mineralized extracellular matrix like material, where scaffold properties and phosphate groups promote mineralization. It is demonstrated that the DPP-mimetic peptide nanofiber networks can be used for apatite-like mineral deposition for bone regeneration.

Probing the influence of SIBLING proteins on collagen-I fibrillogenesis and denaturation

Bone tissue is comprised of collagen, non-collagenous proteins, and hydroxyapatite and the SIBLING (small integrin binding, N-linked glycoprotein) family of proteins is the primary group of non-collagenous proteins. By replicating the native interactions between collagen and the SIBLING proteins at the interface of an implant, it is believed that a bone scaffold will more easily integrate with the surrounding tissue. In this work, bone sialoprotein, osteopontin (OPN), dentin sialoprotein (DSP), dentin phosphoprotein (DPP), C-terminal fragment of dentin matrix protein 1 (DMP1-C), and proteoglycan versions of DSP (DSP-PG) and DMP1 (DMP1-PG) were tested individually to determine their roles in collagen fibrillogenesis and the prevention of denaturation. It was shown that DSP and DPP slowed down fibrillogenesis, while other SIBLINGs had limited impact. In addition, the denaturation time was faster in the presence of DSP and OPN, indicating a negative impact. The role of calcium ions in these processes was also investigated. The presence of calcium ions sped up fibrillogenesis in all scenarios tested, but it had a negative impact by reducing the extent. Calcium also sped up the denaturation in most cases, with the exception of DMP1-C and DSP where the opposite was seen. Calcium had a similar effect on the proteoglycan variants in the fibrillogenesis process, but had no impact on the denaturation process in the presence of these two. It is believed that incorporating DMP1-C or DSP on the surface of a bone implant may improve the collagen interactions with the implant, thereby facilitating improved osteointegration.

Remineralization ability of sodium fluoride on the microhardness of enamel, dentin, and dentinoenamel junction: An in vitro study

Aim:

Dental tissues such as enamel, dentinoenamel junction (DEJ), dentin, and root dentin can react differently to demineralization and remineralization. The aim of this study was to evaluate the remineralization ability of sodium fluoride on the microhardness of enamel, dentin, and dentinoenamel junction.

Materials and Methods:

Ten extracted third molar teeth were sectioned mesiodistally to form control and test groups. For the test group, initial demineralization was done with acetic acid for 24 h followed by remineralization for 28 days by application of sodium fluoride (226 ppm) for 2 min twice a day. Vickers microhardness test was done to control and test groups at different sites after initial demineralization and on the 3^rd, 5^th, 7^th, 14^th, and 28^th day of remineralization.

Statistical Analysis Used:

Data were analyzed with one-way analysis of variance and post hoc test with a significance level of P < 0.001 with SPSS (21) software.

Results:

Microhardness values in the demineralization group were significantly lower than controls (P < 0.001). Evaluation of remineralization samples showed that microhardness similar to control values were achieved at the 3^rd day in root predentin and on the 5^th day in coronal dentin and coronal predentin. On the 7^th day, remineralization coronal predentin was significantly higher than the control (P < 0.001). On the 14^th day, DEJ axial zone and root dentin were similar to control and coronal dentin was significantly higher than the control (P < 0.001). Enamel was similar to control on the 28^th day. Microhardness of DEJ-cusp tip and DEJ-center of the fissure was significantly lower than control even at the 28^th day (P < 0.001).

Conclusion:

Long-term repeated application of sodium fluoride (226 ppm) can improve the microhardness of demineralized dental tissues on enamel, dentin, and DEJ-axial zone, except in the DEJ-cusp tip and DEJ-center of fissure.

From molecules to macrostructures: recent development of bioinspired hard tissue repair

This review summarizes the bioinspired strategies for hard tissue repair, ranging from molecule-induced mineralization, to microscale assembly to macroscaffold fabrication.

Relationship between length variations in Ser/Asp-rich repeats in phosphophoryn and in vitro precipitation of calcium phosphate

OBJECTIVE

Phosphophoryn (PP) is generated from the proteolytic cleavage of dentin sialophosphoprotein (DSPP). PP which contains tandem serine/asparatic acid rich repeats (SDrr) is known to enhance dentin mineralization. The nucleotide sequences coding SDrr are identified in the DSPP genes of toothed animals and the length variations of SDrr between intra- and inter-species have been reported. However, it remains unknown about the relationship between the length variations in SDrr and the functions of PP in matrix mineralization.

DESIGN

By utilizing a mammalian expression system, we generated several recombinant PP proteins (rPP) containing SDrr of different lengths and analyzed their effects on the precipitation of calcium phosphate with an in vitro gel diffusion system.

RESULTS

rPP-Δ37.6 SDrr and rPP-Δ63.5 SDrr, which possessed shortened SDrr that accounted for 62.4 and 36.5% the length of SDrr in full-length rPP (rPP-full), respectively, induced the precipitation of calcium phosphate similar to that of rPP-full at the same molar concentration, whereas rPP-ΔSDrr, in which SDrr were flipped, did not. Furthermore, rPP-Δ63.5 SDrr significantly increased the accumulation of calcium compared with rPP-full at adjusted concentrations so that the same amounts of SDrr were embedded. The results of an ELISA analysis indicated that the amounts of rPP-Δ37.6 SDrr and rPP-Δ63.5 SDrr secreted from transfected cells were 5.2- and 7.1-fold greater than that of rPP-full, respectively.

CONCLUSIONS

The generated rPP-Δ63.5 SDrr which can be substituted for rPP-full may be a candidate for a therapeutic molecule to facilitate hard tissue generation such as reparative dentin formation.

The enamel protein amelotin is a promoter of hydroxyapatite mineralization

Amelotin (AMTN) is a recently discovered protein that is specifically expressed during the maturation stage of dental enamel formation. It is localized at the interface between the enamel surface and the apical surface of ameloblasts. AMTN knock-out mice have hypomineralized enamel, whereas transgenic mice overexpressing AMTN have a compact but disorganized enamel hydroxyapatite (HA) microstructure, indicating a possible involvement of AMTN in regulating HA mineralization directly. In this study, we demonstrated that recombinant human (rh) AMTN dissolved in a metastable buffer system, based on light scattering measurements, promotes HA precipitation. The mineral precipitates were characterized by scanning and transmission electron microscopy and electron diffraction. Colloidal gold immunolabeling of AMTN in the mineral deposits showed that protein molecules were associated with HA crystals. The binding affinity of rh-AMTN to HA was found to be comparable to that of amelogenin, the major protein of the forming enamel matrix. Overexpression of AMTN in mouse calvaria cells also increased the formation of calcium deposits in the culture medium. Overexpression of AMTN during the secretory stage of enamel formation in vivo resulted in rapid and uncontrolled enamel mineralization. Site-specific mutagenesis of the potential serine phosphorylation motif SSEEL reduced the in vitro mineral precipitation to less than 25%, revealing that this motif is important for the HA mineralizing function of the protein. A synthetic short peptide containing the SSEEL motif was only able to facilitate mineralization in its phosphorylated form ((P)S(P) SEEL), indicating that this motif is necessary but not sufficient for the mineralizing properties of AMTN. These findings demonstrate that AMTN has a direct influence on biomineralization by promoting HA mineralization and suggest a critical role for AMTN in the formation of the compact aprismatic enamel surface layer during the maturation stage of amelogenesis.

Mineralization induction effects of osteopontin, bone sialoprotein, and dentin phosphoprotein on a biomimetic collagen substrate

Native bone tissue is composed of a matrix of collagen, noncollagenous proteins, and calcium phosphate minerals, which are primarily hydroxyapatite. The SIBLING (small integrin-binding ligand, N-linked glycoprotein) family of proteins is the primary noncollagenous protein group found in mineralized tissues. In this work, the mineralization induction capabilities of three of the SIBLING members, bone sialoprotein (BSP), osteopontin (OPN), and the calcium-binding subdomain of dentin sialophosphoprotein, dentin phosphoprotein (DPP), are directly compared on a biomimetic collagen substrate. A self-assembled, loosely aligned collagen fibril substrate was prepared, and then (125) I-radiolabeled adsorption isotherms were developed for BSP, OPN, and DPP. The results showed that BSP exhibited the highest binding capacity for collagen at lower concentrations, followed by DPP and OPN. However, at the highest concentrations, all three proteins had similar adsorption levels. The adsorption isotherms were then used to identify conditions that resulted in identical amounts of adsorbed protein. These substrates were prepared and placed in simulated body fluid for 5, 10, and 24 h at 37°C. The resulting mineral morphology was assessed by atomic force microscopy, and the composition was determined using photochemical assays. Mineralization was seen in the presence of all the proteins. However, DPP was seen to be the only protein that formed individual mineral nodules similar to those seen in developing bone. This suggests that DPP plays a significant role in the biomineralization process and that the incorporation of DPP into tissue engineering constructs may facilitate the induction of biomimetic mineral formation.

Adhesion of MC3T3-E1 cells bound to dentin phosphoprotein specifically bound to collagen type I

Dentin sialophosphoprotein (DSPP) is a member of the SIBLING (small integrin binding N-linked glycoprotein) family of proteins commonly found in mineralized tissues. Dentin phosphoprotein (DPP) is a naturally occurring subdomain of DSPP that contains the cell binding RGD sequence. Previously, the orientation and conformation of other SIBLING family members specifically bound to collagen I have been investigated with respect to their cell adhesion properties. In this study, the orientation of DPP under similar circumstances is examined, and the results are discussed relative to the previous investigations. Radiolabeled adsorption isotherms were developed for DPP adsorbing to both tissue culture polystyrene (TCPS) and collagen coated TCPS. Then, a MC3T3-E1 cell adhesion assay was performed on TCPS and collagen coated TCPS in the presence of identical amounts of adsorbed DPP. It was discovered that there was a significant difference in the number of bound cells on the TCPS and collagen coated TCPS, with a preference for TCPS. Furthermore, a cell inhibition assay was conducted to confirm that the cell binding that occurred was due to specific integrin interactions with the RGD sequence of DPP. These results suggest that the orientation of DPP, rather than its conformation, dictates the accessibility of the cell binding RGD domains of DPP and that the RGD sequence in DPP is less accessible when DPP is specifically bound to collagen. The results obtained in this study are in stark contrast to previous studies with related SIBLING proteins, and suggest that DPP does not play a key role in cell binding to the collagen matrix of developing bone.

Structural disorder in proteins brings order to crystal growth in biomineralization

Biomineralization, the generation of hard tissues of living organisms, is a process strictly regulated by hormones, enzymes and a range of regulatory proteins of which several resisted structural characterization thus far. Without actual generalizations, there have been scattered observations in the literature for the structural disorder of these proteins. To address this issue in general, we have collected SwissProt proteins involved in the formation of bone and teeth in vertebrates, annotated for biomineralization. All these proteins show an extremely high level of predicted disorder (with a mean of 53%), making them the most disordered functional class of the protein world. Exactly the same feature was established for evolutionarily more distant proteins involved in the formation of the silica wall of marine diatoms and the shell of oysters and other mollusks. Because these proteins also show an extremely biased amino acid composition, such as high negative charge, high frequency of Ser and Asp or Pro residues and repetitiveness, we also carried out a database search with these sequence features for further proteins. This search uncovered several further disordered proteins with clearly related functions, although their annotations made no mention of biomineralization. This general and very strong correlation between biomineralization, structural disorder of proteins and particular sequence features indicates that regulated growth of mineral phase in biology can only be achieved by the assistance of highly disordered proteins.

Post-translational modification of osteopontin: effects on in vitro hydroxyapatite formation and growth

The manuscript tests the hypothesis that posttranslational modification of the SIBLING family of proteins in general and osteopontin in particular modify the abilities of these proteins to regulate in vitro hydroxyapatite (HA) formation. Osteopontin has diverse effects on hydroxyapatite (HA) mineral crystallite formation and growth depending on the extent of phosphorylation. We hypothesized that different regions of full-length OPN would also have distinct effects on the mineralization process. Thrombin fragmentation of milk OPN (mOPN) was used to test this hypothesis. Three fragments were tested in a de novo HA formation assay; an N-terminal fragment (aa 1-147), a central fragment (aa 148-204) denoted SKK-fragment and a C-terminal fragment (aa 205-262). Compared to intact mOPN the C- and N-terminal fragments behaved comparably, promoting HA formation and growth, but the central SKK-fragment acted as a mineralization inhibitor. In a seeded growth experiment all fragments inhibited mineral proliferation, but the SKK-fragment was the most effective inhibitor. These effects, seen in HA-formation and seeded growth assays in a gelatin gel system and in a pH-stat experiment were lost when the protein or fragments were dephosphorylated. Effects of the fully phosphorylated protein and fragments were also altered in the presence of fibrillar collagen. The diverse effects can be explained in terms of the intrinsically disordered nature of OPN and its fragments which enable them to interact with their multiple partners.

Dentin sialoprotein and dentin phosphoprotein have distinct roles in dentin mineralization

Dentin sialophosphoprotein (DSPP), a major non-collagenous matrix protein of odontoblasts, is proteolytically cleaved into dentin sialoprotein (DSP) and dentin phosphoprotein (DPP). Our previous studies revealed that DSPP null mice display a phenotype similar to human autosomal dominant dentinogenesis imperfecta, in which teeth have widened predentin and irregular dentin mineralization resulting in sporadic unmineralized areas in dentin and frequent pulp exposure. Earlier in vitro studies suggested that DPP, but not DSP, plays a significant role in initiation and maturation of dentin mineralization. However, the precise in vivo roles of DSP and DPP are far from clear. Here we report the generation of DPPcKO mice, in which only DSP is expressed in a DSPP null background, resulting in a conditional DPP knockout. DPPcKO teeth show a partial rescue of the DSPP null phenotype with the restored predentin width, an absence of irregular unmineralized areas in dentin, and less frequent pulp exposure. Micro-computed tomography (micro-CT) analysis of DPPcKO molars further confirmed this partial rescue with a significant recovery in the dentin volume, but not in the dentin mineral density. These results indicate distinct roles of DSP and DPP in dentin mineralization, with DSP regulating initiation of dentin mineralization, and DPP being involved in the maturation of mineralized dentin.

DSPP effects on in vivo bone mineralization

Dentin sialophosphoprotein has been implicated in the mineralization process based on the defective dentin formation in Dspp null mice (Dspp-/-). Dspp is expressed at low levels in bone and Dspp-/- femurs assessed by quantitative micro-computed tomography (micro-CT) and Fourier transform infrared spectroscopic imaging (FTIRI) exhibit some mineral and matrix property differences from wildtype femurs in both developing and mature mice. Compared to wildtype, Dspp-/- mice initially (5 weeks) and at 7 months had significantly higher trabecular bone volume fractions and lower trabecular separation, while at 9 months, bone volume fraction and trabecular number were lower. Cortical bone mineral density, area, and moments of inertia in Dspp-/- were reduced at 9 months. By FTIRI, Dspp-/- animals initially (5 months) contained more stoichiometric bone apatite with higher crystallinity (crystal size/perfection) and lower carbonate substitution. This difference progressively reversed with age (significantly decreased crystallinity and increased acid phosphate content in Dspp-/- cortical bone by 9 months of age). Mineral density as determined in 3D micro-CT and mineral-to-matrix ratios as determined by 2D FTIRI in individual cortical and trabecular bones were correlated (r(2)=0.6, p<0.04). From the matrix analysis, the collagen maturity of both cortical and trabecular bones was greater in Dspp-/- than controls at 5 weeks; by 9 months this difference in cross-linking pattern did not exist. Variations in mineral and matrix properties observed at different ages are attributable, in part, to the ability of the Dspp gene products to regulate both initial mineralization and remodeling, implying an effect of Dspp on bone turnover.

Remineralization of deep enamel dentine caries lesions

Enamel remineralization is generally studied in superficial (up to 100 mum) lesions, but in vivo caries lesions may be tenfold deeper. This article addresses the question whether deep lesions, and extending into dentine, can be remineralized under optimal conditions and if this process is influenced by agents affecting calcium phosphate precipitation and dissolution. Lesions through enamel into dentine were first formed in thin sections and then continuously remineralized for periods up to 200 days. With longitudinal assessment by transversal microradiography it was showed that remineralization throughout the depth of the lesion and into the dentine was possible, although this process is very slow. Fluoride and bisphosphonate treatments affected mainly the deposition in the outer enamel. Although it was assumed that this would affect the diffusion of ions to deeper layers, the treatments had no impact on remineralization in the inner enamel or dentinal parts of the lesions. These findings are discussed with relevant theoretical considerations, and in their possible clinical implications.

Bio-inspired Synthesis of Mineralized Collagen Fibrils

Mineralized collagen fibrils constitute a basic structural unit of collagenous mineralized tissues such as dentin and bone. Understanding of the mechanisms of collagen mineralization is vital for development of new materials for the hard tissue repair. We carried out bio-inspired mineralization of reconstituted collagen fibrils using poly-l-aspartic acid, as an analog of non-collagenous acidic proteins. Transmission electron microscopy and electron diffraction studies of the reaction products revealed stacks of ribbon-shaped apatitic crystals, deposited within the fibrils with their c-axes co-aligned with the fibril axes. Such structural organization closely resembles mineralized collagen of bone and dentin. Initial mineral deposits formed in the fibrils lacked a long range crystallographic order and transformed into crystals with time. Interestingly, the shape and organization of these amorphous deposits was similar to the crystals found in the mature mineralized fibrils. We demonstrate that the interactions between collagen and poly-l-aspartic acid are essential for the mineralized collagen fibrils formation, while collagen alone does not affect mineral formation and poly-l-aspartic acid inhibits mineralization in a concentration dependant manner. These results provide new insights into basic mechanisms of collagen mineralization and can lead to the development of novel bio-inspired nanostructured materials.

A model of the early mineralization process of mantle dentin

The aim of this study was to investigate the relationship between proteoglycans (PGs) and collagen fibrils at the early mineralization process of mantle dentin. Ten first molar dental germs of rats were removed and fixed in glutaraldehyde/formaldehyde in cacodylate buffer and post-fixed in osmium tetroxide. The samples were dehydrated and embedded in epoxy resin. Ultrathin sections were contrasted and analyzed in TEM before and after treatment with EDTA, chondroitinases AC and ABC. After EDTA treatment, a electrondense substance associated with collagen fibril was removed, and did not stain again. A high magnification of these areas showed globular structures with 15 nm diameter surrounding collagen fibrils. In advanced mineralization areas, collagen fibrils showed a banded pattern and at high magnification the fibrils presented a light 10 nm ring inside and a dark 10 nm ring outside. After chondroitinase treatment, the electrondense substance associated with collagen fibrils was removed, showing a banded pattern of clear and dark areas along them. From morphological data, the authors proposed a model of interaction between PGs and collagen fibrils, where glicosaminoglycans chains are inside the fibrils, while the protein core remains outside. That stereochemical arrangement would start the crystal nucleation.