A novel antibacterial dental glass-ionomer cement

Biological Activities of Glass Ionomer Cement Supplemented with Fortilin on Human Dental Pulp Stem Cells

This study aimed to determine the most suitable recombinant fortilin and evaluate the biological activities of glass ionomer cement (GIC) incorporated with fortilin on human dental pulp stem cells (hDPSCs). Full-length and three fragments of Penaeus merguiensis fortilin were cloned and examined for their proliferative and cytoprotective effects on hDPSCs by MTT (3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide) assay. Human DPSCs were cultured with GIC supplemented with fortilin, tricalcium phosphate, or a combination of tricalcium phosphate and fortilin, designated as GIC + FL, GIC + TCP, and GIC + TCP + FL, respectively (n = 4 for each group). At given time points, hDPSCs were harvested and analyzed by MTT, quantitative reverse transcription polymerase chain reaction, alkaline phosphatase activity, and Alizarin Red assays. The full-length fortilin promoted cell proliferation and significantly increased cell survival. This protein was subsequently added into the GIC along with tricalcium phosphate to investigate the biological activities. All experimental groups showed reduced cell viability after treatment with modified GICs on days 1 and 3. The GIC + TCP + FL group significantly promoted odontoblastic differentiation at particular time points. In addition, alkaline phosphatase activity and calcium phosphate deposit were markedly increased in the GIC + TCP + FL group. Among all experimental groups, the GIC incorporated with fortilin and tricalcium phosphate demonstrated the best results on odontogenic differentiation and mineral deposition in hDPSCs.

A PMMA bone cement with improved antibacterial function and flexural strength

A novel non-leaching antibacterial bone cement has been developed and evaluated. An antibacterial furanone derivative was synthesized and covalently coated onto the surface of alumina filler particles, followed by mixing into a conventional poly(methyl methacrylate) bone cement. Flexural strength and bacterial viability were used to evaluate the modified cements. Effects of coated antibacterial moiety content, coated alumina filler particle size and loading were investigated. Results showed that almost all the modified cements showed higher flexural strength (up to 10%), flexural modulus (up to 18%), and antibacterial activity (up to 67% to S. aureus and up to 84% to E. coli), as compared to original poly(methyl methacrylate) cement. Increasing antibacterial moiety and filler loading significantly enhanced antibacterial activity. On the other hand, increasing coated filler particle size decreased antibacterial activity. Increasing antibacterial moiety content and particle size did not significantly affect flexural strength and modulus. Increasing filler loading did not significantly affect flexural modulus but reduced flexural strength. Antibacterial agent leaching tests showed that it seems no leachable antibacterial component from the modified experimental cement to the surrounding environment. Within the limitations of this study, the modified poly(methyl methacrylate) bone cement may potentially be developed into a clinically useful bone cement for reducing in-surgical and post-surgical infection.

Antibacterial and mechanical properties of arginine-containing glass ionomer cements

OBJECTIVE

The study investigated the effect of incorporating l-arginine (Arg) in a glass ionomer cement (GIC) on its mechanical properties and antibacterial potential.

METHODS

Pre-determined proportions (1%, 2%, and 4% by wt.) of Arg were incorporated in GIC powder; while GIC without Arg served as control. The flexural strength, nanohardness, surface roughness, elemental analysis using SEM-EDX (n = 6) and F/Arg/Ca/Al/Si release in deionized water for 21 days were assessed. The antibacterial potential was evaluated in a multi-species biofilm model with Streptococcus mutans, Streptococcus sanguinis, Streptococcus gordonii, and Lactobacillus acidophilus for 72 h. Real-time qPCR was used to analyse biofilm bacterial concentrations. Propidium monoazide modification of real-time qPCR was performed to quantify viable/dead bacteria. The pH, lactic acid, ADS activity, and H₂O₂ metabolism were measured. Confocal microscopy was used to investigate the biofilm bacterial live/dead cells, density, and thickness.

RESULTS

There was no difference in flexural strength among the different groups (p > 0.05). No significant difference in nanohardness and surface roughness was observed between 4% Arg + GIC and control (p > 0.05). The 4% Arg + GIC showed significantly higher F/Arg/Al/Si release than the other groups (p < 0.05), reduced total bacterial concentration and growth inhibition of viable S. mutans and S. sanguinis (p < 0.05). Lactic acid formation for 4% Arg + GIC was significantly higher than 1% Arg + GIC (p < 0.05). The spent media pH of 4% Arg + GIC was higher than the other groups (p < 0.05), with proportionately lower ammonia and higher H₂O₂ released (p < 0.05).

SIGNIFICANCE

Addition of 4% l-arginine in GIC enhanced its antibacterial activity via a biofilm modulatory effect for microbial homeostasis, with no detrimental effect on its mechanical properties.

The effect of magnesium oxide nanoparticles on the antibacterial and antibiofilm properties of glass-ionomer cement

Objectives

This study examined the antibacterial and antibiofilm properties of conventional glass-ionomer cement (GIC) modified by the addition of magnesium oxide (MgO) nanoparticles.

Materials and methods

MgO nanoparticles were characterised by XRD, FTIR, and SEM analysis and tested for its activity against Streptococcus mutans and Streptococcus sobrinus. MgO nanoparticles were incorporated into GIC powder (Ketac Molar Easymix) at different concentrations and the antibacterial and antibiofilm activity was evaluated using agar disk diffusion and biofilm-CFU counting assays. ANOVA and Tukey's post hoc tests were used for the analysis, and the level of significance was set at p < 0.05.

Results

MgO nanoparticles showed antibacterial activity against both microorganisms (MIC = 500 μg/ml and MBC = 1000 μg/ml). A significant difference in the zones of inhibition was detected (p < 0.005). The effect was evident in the 2.5% MgO nanoparticle modified GIC while the CFU counting biofilm assay showed the effect of the added nanoparticles from 1% with a significant difference between the tested material groups (p < 0.005).

Conclusions

The MgO nanoparticle modified GIC showed effective antibacterial and antibiofilm activity against two cariogenic microorganisms and could be considered for further development as a biocompatible antibacterial dental restorative cement.

Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance

Microbial infections affect humans worldwide. Many quaternary ammonium compounds have been synthesized that are not only antibacterial, but also possess antifungal, antiviral and anti-matrix metalloproteinase capabilities. Incorporation of quaternary ammonium moieties into polymers represents one of the most promising strategies for preparation of antimicrobial biomaterials. Various polymerization techniques have been employed to prepare antimicrobial surfaces with quaternary ammonium functionalities; in particular, syntheses involving controlled radical polymerization techniques enable precise control over macromolecular structure, order and functionality. Although recent publications report exciting advances in the biomedical field, some of these technological developments have also been accompanied by potential toxicological and antimicrobial resistance challenges. Recent evidenced-based data on the biomedical applications of antimicrobial quaternary ammonium-containing biomaterials that are based on randomized human clinical trials, the golden standard in contemporary medicinal science, are included in the present review. This should help increase visibility, stimulate debates and spur conversations within a wider scientific community on the implications and plausibility for future developments of quaternary ammonium-based antimicrobial biomaterials.

Effect of anti-biofilm glass-ionomer cement on Streptococcus mutans biofilms

Dental restorative materials with antimicrobial properties can inhibit bacterial colonization, which may result in a reduction of caries at tooth-filling interaction zones. This study aimed to develop antibacterial glass-ionomer cements (GIC) containing a quaternary ammonium monomer (dimethylaminododecyl methacrylate, DMADDM), and to investigate their effect on material performance and antibacterial properties. Different mass fractions (0, 1.1% and 2.2%) of DMADDM were incorporated into the GIC. The flexure strength, surface charge density, surface roughness and fluoride release were tested. A Streptococcus mutans biofilm model was used. Exopolysaccharides (EPS) staining was used to analyze the inhibitory effect of DMADDM on the biofilm matrix. In addition, biofilm metabolic activity, lactic acid metabolism and the expression of glucosyltransferase genes gtfB, gtfC and gtfD were measured. GIC containing 1.1% and 2.2% DMADDM had flexural strengths matching those of the commercial control (P>0.1). DMADDM was able to increase the surface charge density but reduced surface roughness (P<0.05). The incorporation of 1.1% and 2.2% DMADDM elevated the release of fluoride by the GIC in the first 2 days (P<0.05). The novel DMADDM-modified GIC significantly reduced biofilm metabolic activity (P<0.05) and decreased lactic acid production (P<0.05). The quantitative polymerase chain reaction (qPCR) results showed that the expression of gtfB, gtfC and gtfD decreased when mass fractions of DMADDM increased (P<0.05). EPS staining showed that both the bacteria and EPS in biofilm decreased in the DMADDM groups. The incorporation of DMADDM could modify the properties of GIC to influence the development of S. mutans biofilms. In this study, we investigated the interface properties of antibacterial materials for the first time. GIC containing DMADDM can improve material performance and antibacterial properties and may contribute to the better management of secondary caries.

Restorative materials containing antimicrobial agents: is there evidence for their antimicrobial and anticaries effects? A systematic review

The aim of this systematic literature review was to investigate whether the incorporation of antimicrobial agents into dental restorative materials truly exerts an antimicrobial effect against common cariogenic bacteria (primary outcome), and whether the inclusion of antimicrobial agents is able to prevent caries around restorations (secondary outcome). MEDLINE, via PubMed, was searched for papers published between 1980 and 30 November 2014. A total of 1126 articles were retrieved. After inclusion/exclusion assessment, 147 full text articles were read and included in the review, comprising 130 in vitro, 1 in situ, and 4 in vivo studies, as well as 12 literature reviews. In about 78% of in vitro studies, and in all identified in situ and in vivo studies, a positive antimicrobial effect had been found. However, the anticaries effect had not been tested in any of the selected studies. It was concluded that there is indeed evidence that restorative dental materials containing antimicrobial agents exert an antimicrobial effect, both in laboratory and in clinical studies. However, no evidence has been found regarding the role of these agents in preventing or controlling dental caries, or in preventing caries around restorations.

Comparative evaluation of the antibacterial and physical properties of conventional glass ionomer cement containing chlorhexidine and antibiotics

Objective:

To evaluate the antimicrobial efficacy and compressive strength of conventional glass ionomer cement (GIC) containing chlorhexidine and antibiotics at varying concentrations.

Materials and Methods:

Chlorhexidine diacetate and antibiotics (ciprofloxacin, metronidazole, and minocycline) were incorporated into GIC Fuji IX at 1.5% and 3% w/w ratio to form the experimental groups. The experimental GIC specimens were placed on brain heart infusion agar plates inoculated with Streptococcus mutans, and the area of inhibition was measured after 48 h. The 24-h compressive strength of the set specimens was evaluated using a Universal Testing Machine.

Results:

The control group demonstrated no zone of inhibition. All experimental groups showed inhibition against S. mutans (P < 0.05), with larger zones of inhibition found in the higher concentration groups. Compressive strength at the end of 24 h decreased in the experimental groups as compared to the control group (P < 0.05), but no difference was found between the experimental groups (P > 0.05).

Conclusion:

The present study demonstrated that experimental GICs containing chlorhexidine diacetate and antibiotics were effective in inhibiting S. mutans, and incorporation of 1.5% ABX was optimal to give the appropriate antibacterial and physical properties.

In situ antibiofilm effect of glass-ionomer cement containing dimethylaminododecyl methacrylate

OBJECTIVE

The aim of this study was to investigate antibiofilm effects of a recently developed glass ionomer cement (GIC) containing dimethylaminododecyl methacrylate (DMADDM) under oral conditions.

METHODS

Biofilms were allowed to form in situ on GIC specimens (n=216) which contained DMADDM (1.1wt.% or 2.2wt.%). Samples without DMADDM served as control (n=108). GIC specimens were fixed on custom made splints and exposed to the oral cavity in six healthy volunteers for 24, 48 and 72h, respectively. Biofilm viability and coverage were analyzed by fluorescence microscopy (FM) and evaluated by red/green ratios and an established scoring system. Bacterial morphology and biofilm accumulation were determined by scanning electron microscopy (SEM). Additionally, material properties as surface charge density of quaternary ammonium groups, surface roughness and DMADDM release were recorded.

RESULTS

FM results showed a higher ratio (24h: 0%: 0.5, 1.1%: 1.2, 2.2%: 2.5) of red/green fluorescence on GIC samples containing DMADDM. Biofilm coverage and viability scores were significantly reduced (24h: q1/median/q3 for: 0%: 3/4/5, 1.1%: 2/3/3, 2.2%: 1/2/2) on DMADDM containing samples compared to controls after 24h as well as 48 and 72h in situ (p<0.05). While surface charge density of quaternary ammonium groups and DMADDM release increased with the DMADDM concentration, surface roughness was lowest on specimens containing 2.2wt.% DMADDM.

SIGNIFICANCE

An in situ dental biofilm model was used to evaluate the novel GIC containing DMADDM. This material strongly inhibited biofilms in situ and is promising to prevent bacterial colonization on the surface of restorations.

Use of glass ionomer cement containing antibiotics to seal off infected dentin: a randomized clinical trial

Dental materials with antibacterial properties can prevent the harmful effects caused by oral cariogenic bacteria. This double-blind controlled clinical trial evaluated the performance of a glass ionomer cement (GIC) added with antibiotics for sealing infected dentin in atraumatic restorations of primary molars. The study enrolled 45 children (45 teeth) between 5 and 8 years of age, of both genders, divided into two groups: GC (n=22), where cavities were lined with a conventional GIC (Vidrion F) and GA (n=23), with cavities lined with Vidrion F added with 1% each of metronidazole, ciprofloxacin and cefaclor antibiotic. Both groups were restored with Ketac Molar Easymix. Molars with carious lesions on the inner half of dentin without clinical or radiographic pulp damage were selected. Patients were evaluated clinically (pain, fistulas or mobility) and radiographically (area of caries, periapical region and furcation) after 1, 3, 6 and 12 months. For statistical analysis, chi-squared or Fisher's exact tests were used with a 5% significance level. GA (82.6-95.7%) had better results than GC (12.5-36.4%) in all evaluations (p<0.05) and the difference in the success rate was 46.2-72.5% higher for GA. The use of the antibiotic-containing GIC liner on infected dentin proved satisfactory when applied in deciduous teeth.