Effect of Radiotherapy and Taper of Root Canal Preparation on the Biomechanical Behavior of Mesial Roots of Mandibular Molars

INTRODUCTION

This study aimed to investigate the effect of radiotherapy and taper of root canal preparation on the biomechanical behavior of mesial roots of mandibular molars.

METHODS

Eighty mandibular molars with 2 canals in the mesial root were randomly allocated into 2 groups (n = 40): one group underwent irradiation (60 Gy), while the other did not. Subsequently, the mesial roots were sectioned and each group was subdivided into 5 subgroups (n = 8), according to the preparation taper: no preparation (control); 25.03; 25.04; 25.06; and 25.08. All groups were considered homogeneous regarding their dimensions, weight, and morphology. The prepared specimens were embedded in cylindrical plastic molds and subjected to a cyclic fatigue test. A failure analysis was performed according to the extension and course of the fractures. Two-way ANOVA, Tukey's post-hoc, Fisher's exact, and Kaplan-Meier tests were conducted to evaluate the obtained data (α = 5%).

RESULTS

Fatigue resistance decreased as the taper of the preparation increased (P < .05). Preparation 25.03 presented significantly higher values only than 25.08 (P < .05), while 25.04, 25.06, and 25.08 were considered similar (P > .05). Irradiation significantly reduced the biomechanical performance (P < .05). Survival analysis corroborated these findings. There were no differences in the distribution of fracture types among the groups (P > .05).

CONCLUSION

The biomechanical behavior of the mesial roots of the mandibular molars decreased significantly in the face of irradiation and as the taper of the preparation increased.

Comparative evaluation of remaining dentin thickness, canal centering ability and apical deformity between ProFit S3 and Protaper gold - A nano CT study

Purpose

For the root canal treatment to be successful, the root canal system must be cleaned and shaped, and must be gradually widened from the apical to the coronal region in order to preserve dentin thickness. ProFit S3 (Profit Dental, India) patented rotary file with variable taper design preserves dentin. The study employs ultra-high-resolution nano-computed tomography to assess the volumetric changes of two new rotary files in permanent mandibular premolars.

Materials and methods

Based on inclusion and exclusion criteria, this in-vitro investigation used extracted premolars. Before the pre-operative scan, samples were made and the working length was determined using a high-precision nano-CT (SkyScan 2214, Bruker, Kontich, Belgium). A single skilled pediatric dentist used ProFit S3 (Profit Dental, India) and Protaper Gold (PTG; Dentsply, Tulsa Dental Specialties, Tulsa, OK, USA) to prepare the canals. Post-op scans were similar to pre-ops. For 3D root canal visualization and analysis, NRecon software was used to rebuild images.

Results

Profit S3 has a mean value of 0.65500 and Protaper gold 1.38800, indicating a significant range. Protaper gold followed Profit S3 in canal volume differential. The two rotating file systems differed significantly (p 0.05). ProFit S3 maintained mesiodistal and buccolingual dentin thickness at 4 mm, 8 mm, and 12 mm, followed by Protaper Gold.

Conclusions

ProFit S3 exhibited the lowest mean canal volume difference compared to Protaper gold. Unlike Protaper Gold, ProFit S3 offers a variable taper design that preserves root canal anatomy, peri cervical dentin, and dentin thickness.

Effects of endodontic irrigation solutions on structural, chemical, and mechanical properties of coronal dentin: A scoping review

OBJECTIVE

This review aims to assess structural, chemical, and mechanical properties of coronal dentin after endodontic irrigation.

MATERIALS AND METHODS

Reporting followed the PRISMA extension for scoping reviews. An electronic search was carried out in PubMed, Embase, and Cochrane Library. Records filtered by language and published up to November 4, 2022 were independently screened by two researchers. Studies evaluating structural, chemical, or mechanical properties of human permanent coronal dentin after irrigation within the scope of nonsurgical root canal treatment were included. Data were extracted regarding study type, sample description and size, experimental groups, outcome, evaluation method, and main findings.

RESULTS

From the initial 1916 studies, and by adding 2 cross-references, 11 in vitro studies were included. Seven studies provide ultrastructural and/or chemical characterization, and six assessed microhardness and/or flexural strength. One percent to 8% sodium hypochlorite (NaOCl) and 1%-17% ethylenediaminetetraacetic acid (EDTA) were the most commonly tested solutions, with contact times of 2-240 min (NaOCl) and 1-1440 min (EDTA) being evaluated.

CONCLUSIONS

Overall, the literature is consensual regarding the inevitable impact of NaOCl and chelating agents on coronal dentin, with both deproteinizing and decalcifying effects being concentration- and time-dependent. The alteration of mechanical parameters further confirmed the surface and subsurface ultrastructural and chemical changes.

CLINICAL SIGNIFICANCE

Endodontic treatment success highly depends on restorative sealing. Understanding the result of exposing coronal dentin, the main substrate for bonding, to irrigants' action is crucial. The deproteinizing and decalcifying effects of NaOCl and chelating agents are both concentration- and time-dependent, causing surface and subsurface ultrastructural, chemical, and mechanical alterations.

Epoxy vs. Calcium Silicate-Based Root Canal Sealers for Different Clinical Scenarios: A Narrative Review

This study aimed to review the considerations for choosing a suitable sealer according to various endodontic scenarios. An electronic search of PubMed, Scopus, and the Web of Science was undertaken for the keywords of 'sealer choosing', 'appropriate sealer', 'suitable sealer', 'sealer for clinical scenario', and 'sealer for clinical situations'. However, the literature review revealed a lack of studies with practical clinical recommendations regarding the choice of appropriate endodontic root canal sealers for particular clinical situations of root canal treatment. Therefore, a narrative review was undertaken under the basis of the characteristics of an epoxy resin-based sealer (ERS) versus a calcium silicate-based sealer (CSS). Based on the evidence found through the review, the choice of an appropriate sealer in a variety of clinical scenarios was proposed. An ERS is recommended for one-visit non-vital cases, teeth with periodontal involvement, cracked teeth, and internal root resorption without root perforation. A CSS is recommended for vital or non-vital cases in multiple visits, teeth with internal root resorption with perforation or internal approach for external cervical resorption, teeth with open apices, and teeth with iatrogenic aberrations.

Fatigue and failure analysis of restored endodontically treated maxillary incisors without a dowel or ferrule

STATEMENT OF PROBLEM

Information on the survival and mode of failure of endodontically treated incisors without a ferrule and restored without dowels is lacking.

PURPOSE

The purpose of this in vitro study was to compare the survival and failure mode of endodontically treated incisors without a ferrule and restored with bonded ceramic crowns and various composite resin foundation restorations without dowels with a control group with fiber dowels.

MATERIAL AND METHODS

Forty-five decoronated endodontically treated bovine incisors without ferrule were divided into 3 experimental groups and restored with different adhesive foundation restorations without dowel: nanohybrid composite resin (Nd), bulk-fill composite resin foundation restoration (NdB), and fiber-reinforced bulk-fill composite resin (NdFR). A control group with conventional foundation restorations (glass-fiber dowel with nanohybrid composite resin foundation restoration without ferrule) (D) was included for comparison. All teeth were prepared to receive bonded lithium disilicate ceramic crowns luted with dual-polymerizing composite resin cement and were subjected to accelerated fatigue testing. Cyclic isometric loading was applied to the incisal edge at an angle of 30 degrees and a frequency of 5 Hz, beginning with a load of 100 N (5000 cycles). A 100-N load increase was applied each 15 000 cycles. Specimens were loaded until failure or to a maximum for cycles endured of 1000 N (140 000 cycles). Groups were compared by using the Kaplan-Meier survival analysis (log rank test at α=.05 and pairwise post hoc comparisons) and life table analysis for load-at-failure (followed by Wilcoxon pairwise comparison α=.05).

RESULTS

All the specimens failed before 140 000 load cycles. Even though no statistically significant differences were found between the experimental groups without dowel (P>.127), the fiber-reinforced foundation restoration yielded the highest mean ±standard deviation cycles to failure (46 023 ±4326) compared with Nd (38 899 ±2975) and NdB (39 751 ±2998). NdFR, however, outperformed the foundation restoration with glass-fiber dowel (35 026 ±2687) (P<.05). Most failure in groups without dowel were restorable, while 100% of catastrophic failure (unrestorable) were found in the group with dowels.

CONCLUSIONS

Based on the present in vitro study, dowels did not improve the performance of the adhesive restoration of endodontically treated incisors without a ferrule. The use of a short fiber-reinforced composite resin foundation restoration without a dowel was able to not only improve the resistance of the restorations compared with adhesive foundation restorations with dowels but also minimize catastrophic failures.

How loss of tooth structure impacts the biomechanical behavior of a single-rooted maxillary premolar: FEA

To evaluate the influence of the loss of coronal and radicular tooth structure on the biomechanical behavior and fatigue life of an endodontically treated maxillary premolar with confluent root canals using finite element analysis (FEA). An extracted maxillary second premolar was scanned to produce intact (IT) 3D model. Models were designed with an occlusal conservative access cavity (CAC) with different coronal defects; mesial defect (MO CAC), occlusal, mesial and distal defect (MOD CAC), and 2 different root canal preparations (30/.04, and 40/.04) producing 6 experimental models. FEA was used to study each model. A simulation of cycling loading of 50N was applied occlusally to stimulate the normal masticatory force. Number of cycles till failure (NCF) was used to compare strength of different models and stress distribution patterns via von Mises (vM) and maximum principal stress (MPS). The IT model survived 1.5 × 1010 cycles before failure, the CAC-30.04 had the longest survival of 1.59 × 109, while the MOD CAC-40.04 had the shortest survival of 8.35 × 107 cycles till failure. vM stress analysis showed that stress magnitudes were impacted by the progressive loss of coronal tooth structure rather than the radicular structure. MPS analysis showed that significant loss of coronal tooth structure translates into more tensile stresses. Given the limited size of maxillary premolars, marginal ridges have a critical role in the biomechanical behavior of the tooth. Access cavity preparation has a much bigger impact than radicular preparation on their strength and life span.

Effectiveness of continuous chelation irrigation protocol in endodontics: a scoping review of laboratory studies

This scoping review aimed to synthesize and explore the current boundaries and limitations of laboratory research on the effectiveness of continuous chelation irrigation protocol in endodontics. This scoping review was reported according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) Extension for Scoping Reviews. Literature search was conducted on Pubmed and Scopus to identify all laboratory studies evaluating smear layer and hard-tissue debris removal or, antimicrobial efficacy, or dentine erosion induced by continuous chelation. Two independent reviewers performed the all review steps and the relevant items were recorded. Seventy-seven potentially relevant studies were identified. Finally, 23 laboratory studies met the eligibility criteria for qualitative synthesis. Seven studies focused on the smear layer/debris removal outcome, 10 on antimicrobial activity, and 10 on dentine erosion. In general, the continuous chelation protocol was equally or more effective in the cleanliness of root canals and antimicrobial activity compared with traditional sequential protocol. In addition, etidronate solutions seemed to be milder chelating agents compared to those with EDTA, thus resulting in reduced or no dentine erosion and roughness modification. Yet, the methodological differences among the included studies limit the results' generalizability. The continuous chelation seems to be equally or more effective in all investigated outcomes when compared with the traditional sequential protocol. The methodological variability among the studies and shortcomings in the methods employed limit the generalizability and clinical relevance of the results. Standardized laboratory conditions combined with reliable three-dimensional investigation approaches are necessary to obtain clinically informative findings.

Options for Access Cavity Designs of Mandibular Incisors: Mechanical Aspects from Finite Element Study

INTRODUCTION

This study investigated different access cavity designs of mandibular anteriors in terms of their effect on the biomechanical behavior and longevity using finite element analysis (FEA).

METHODS

A 3-dimensional model of a mandibular incisor was created for FEA. After validating the intact tooth (IT) model, 4 experimental models were developed (traditional lingual access cavity [TLA], facial access cavity [FAC], incisal access cavity [ICA], and cervical access cavity [CVA]). Cyclic loading was simulated, and the number of cycles until failure (NCF) was compared to the IT model. Stress distribution patterns, maximum von Mises stresses (vMSs), and maximum principal stresses (MPSs) were analyzed mathematically. The safety factor was also calculated and demonstrated.

RESULTS

The maximum vMS registered on the IT model was 134.16 MPa. The FCA and the CVA provided the highest NCF (193.7% compared with the IT model) followed by ICA (58.2%) and TLA (21.4%). The vM and MPS analysis revealed that the lingual surface is a primary stress channel, and the presence of an access cavity significantly weakens the tooth structure. Although the maximum vMS registered for the IT model was 134.16 MPa, the maximum vMS was 73.97 MPa for both the FCA and the CVA, 152.27 MPa for the ICA, and 173.63 MPa for the TLA.

CONCLUSIONS

The facial and cervical access cavity designs provided considerable reinforcement to the endodontically treated mandibular incisors. With advancements in esthetic restorative materials and endodontic instruments, facial access design could emerge as the new standard for access cavity preparation in mandibular incisors.

Quasi-3D dynamic photoelastic analysis of stress distribution during preparation of simulated canals with 13 mechanical preparation systems

AIM

The aim of this study is to compare the stress produced on the internal walls of simulated canals by nine rotary and four reciprocating systems.

METHODOLOGY

Sixty-five isotropic transparent blocks containing a 60° curved and tapered simulated canal were selected and distributed into 13 groups (n = 5) according to the preparation system: BioRace, HyFlex EDM, iRaCe, Mtwo, One RECI, ProTaper Next, RaCe EVO, Reciproc, Reciproc Blue, R-Motion, VDW.ROTATE, XP-Endo Rise Shaper, and XP-Endo Shaper. Each resin block was mounted in a vice and a digital camera recorded the entire sequence of each preparation system through a circular polariscope set for dark field analysis. The video frames when each instrument reached the end of the coronal, middle, and apical thirds of the canal were extracted from the recordings and analysed by two independent observers regarding the stress generated on the canal walls using a semi-quantitative evaluation on a 0-5 scale. Intra- and inter-observer agreement were subjected to the Cohen's Kappa coefficient test, whilst the experimental results were compared using Kruskal-Wallis test post hoc pairwise comparisons with Bonferroni correction (α = 5%).

RESULTS

The inter- and intra-observer agreement were 0.98 and 1, respectively. Most instruments demonstrated acceptable performance (scores ≤ 2) in all thirds. Other instruments, such as the HyFlex EDM 25.12 (coronal and middle thirds), Reciproc Blue R25 and Reciproc R25 (coronal and apical thirds), R-Motion 30.04 (apical third), and VDW.ROTATE 20.05 (apical third) showed scores higher than 3. Statistical analysis revealed a significant difference amongst the tested systems at the coronal, middle, and apical thirds (p < .05).

CONCLUSION

None of the canal instrumentation protocols were stress-free, showing varying levels of stress concentrations. Various factors seemed to influence the magnitude of stress and its distribution pattern on the canal walls. Overall, instruments characterized by a larger taper, lower speed, reciprocating motion, and made of heat-treated NiTi alloy exhibited higher patterns of stress distribution.

Implications of root, pulp chamber, and canal anatomy on pulpotomy and revitalization procedures

OBJECTIVES

This review aims to discuss the implications of anatomy of the root, pulp chamber, and canals on pulpotomy and revitalization procedures (RPs) as treatment alternatives to root canal treatment procedures.

METHODS

This narrative review was undertaken to address two main questions - why remove vital pulp tissue in teeth with complex canal anatomy when it can be preserved? And why replace the necrotic pulp in teeth with mature roots with a synthetic material when we can revitalize? This review also aims to discuss anatomical challenges with pulpotomy and revitalization procedures.

RESULTS

Maintaining the vitality of the pulp via partial or full pulpotomy procedures avoids the multiple potential challenges faced by clinicians during root canal treatment. However, carrying out pulpotomy procedures requires a meticulous understanding of the pulp chamber anatomy, which varies from tooth to tooth. Literature shows an increased interest in the application of RPs in teeth with mature roots; however, to date, the relation between the complexity of the root canal system and outcomes of RPs in necrotic multi-rooted teeth with mature roots is unclear and requires further robust comparative research and long-term follow-up.

CONCLUSIONS

Whenever indicated, pulpotomy procedures are viable treatment options for vital teeth with mature roots; however, comparative, adequately powered studies with long-term follow-up are needed as a priority in this area. RPs show promising outcomes for necrotic teeth with mature roots that warrant more evidence in different tooth types with long-term follow-ups.  CLINICAL RELEVANCE: Clinicians should be aware of the pulp chamber anatomy, which is subject to morphological changes by age or as a defensive mechanism against microbial irritation, before practicing partial and full pulpotomy procedures. RP is a promising treatment option for teeth with immature roots, but more evidence is needed for its applications in teeth with mature roots. A universal consensus and considerably more robust evidence are needed for the standardization of RPs in teeth with mature roots.

Comparison of conventional preparation with modified access preparation on fracture resistance of primary molars - A finite element analysis

Objective

To investigate the influence of Conventional Straight (CS) line and Modified Straight (MS) line access preparations with various restorative materials on the fracture resistance of primary molars using Finite Element Analysis (FEA).

Methodology

Three FEA models for each of the primary molars were divided into Group I- Intact tooth model; Group II- Model with CS outline and Group III- Model with MS outline. Based on the restorative material used, Group II and III were further subdivided into subgroup 1- GIC restoration, subgroup 2 - composite resin with GIC base and subgroup 3- Stainless Steel Crown (SSC). Each model was subjected to 5 different force loads directed at the occlusal surface. Maximal von Mises (VM) stresses calculated from stress distribution patterns.

Result

The maximum displacement, in all the models of primary molars were seen in GIC restored models in molars with both CS and MS access whereas the minimal displacement was seen in the SSC restored molars of MS group.

Conclusion

In primary maxillary second molar and mandibular first and second molar with intact marginal ridges, the fracture resistance of tooth with MS outline restored with GIC base followed by Composite resin was comparable with the tooth restored with SSC and CS outline.

Clinical outcome

Based on the results of this FEA analysis, composite restorations with MS outline would be appropriate for endodontically treated primary molars that have intact margins.

Crack Propagation and Fatigue Performance of Partial Posterior Indirect Restorations: An Extended Finite Element Method Study

Dental ceramics are susceptible to slow, progressive crack growth after cyclic loading. The purpose of this study was to investigate the progressive patterns of cracks in two different types of CAD/CAM ceramic materials used with three different partial posterior indirect restoration (PPIR) designs and to determine the materials' failure risk using a fatigue test. Standard initial cracks were formed in Standard Tessellation Language (STL) files prepared for three different PPIRs. The materials chosen were monolithic lithium disilicate (LS) and polymer-infiltrated ceramic networks (PICNs). The extended finite element method (XFEM) was applied, and the fatigue performance was examined by applying a 600 N axial load. The cracks propagated the most in onlay restorations, where the highest displacement was observed. In contrast, the most successful results were observed in overlay restorations. Overlay restorations also showed better fatigue performance. LS materials exhibited more successful results than PICN materials. LS materials, which can be used in PPIRs, yield better results compared to PICN materials. While inlay restorations demonstrated relatively successful results, overlay and onlay restorations can be specified as the most and the least successful PPIR types, respectively.

Shaping ability of BlueShaper, TruNatomy, DC Taper and HyFlex EDM in long oval canals: An ex vivo study

AIM

This study evaluated and compared the shaping ability of four rotary instrument systems in long-oval root canals using microcomputed tomographic (micro-CT) evaluation. Currently, there is no data available on the canal shaping abilities of BlueShaper and DC Taper instruments.

METHODOLOGY

Sixty-four single-rooted mandibular premolars were matched based on similar root canal morphologic features as determined by (micro-CT) and randomly assigned to 1 of 4 experimental groups (n = 16) according to the instrument system used: BlueShaper, TruNatomy, DC Taper and HyFlex EDM One File. Changes in the root canal surface and volume, remaining dentine thickness, and number of prepared areas were assessed.

RESULTS

No significant differences were found amongst the four instrument systems for the parameters evaluated (p > .05). There was a significant reduction in the number of unprepared areas and the remaining dentine thickness after each increase in size of the instruments tested (p < .05).

CONCLUSIONS

The four instrument systems perform similarly in long oval root canals. Although none could prepare all canal walls, larger preparations incorporated significantly more surfaces in the final shape.

Impact of Contracted Endodontic Access Cavities on the Fracture Resistance of Endodontically Treated Teeth After Mechanical Aging by Simulated Chewing Forces

INTRODUCTION

This in vitro study aimed to comparatively evaluate the fracture resistance of contracted endodontic cavities (CECs) versus traditional endodontic cavities (TECs) in mandibular molars after subjecting the samples to a chewing simulator.

METHODS

A total of 24 freshly extracted human mandibular molars were included in the study. Teeth with intact crowns and mature root apices that were devoid of caries, attrition, restorations, and cracks were selected and randomly assigned to 3 groups (n = 8) as follows: Group 1: TECs, Group 2: CECs, and Group 3: intact teeth (control group). After endodontic treatment, the teeth were restored with EverX bulk-fill composite and layered occlusally with nanohybrid composite SolareX and subjected to a chewing simulator where 240,000 masticatory cycles were simulated, which translates to 1 year of clinical function. The teeth were then subjected to static loading in a universal testing machine and the maximum load to fracture and the pattern of failure (restorable/unrestorable) were recorded. Data were evaluated with analysis of variance and the Tukey post hoc test for multiple comparisons.

RESULTS

The CEC group had higher fracture resistance when compared with the TEC group; however, the difference was not statistically significant. The fracture resistance of the samples in the control group was statistically higher than those in the experimental groups (P < .005).

CONCLUSIONS

There was no difference observed in the fracture resistance of mandibular molars with TECs and CECs subjected to masticatory loading.

Patterns of stress distribution of endodontically treated molar under different types of loading using finite element models-the exploring of mechanism of vertical root fracture

INTRODUCTION

The purpose of this study was to explore the mechanism of vertical root fracture (VRF) using three-dimensional finite element models (FEMs).

METHODS

An endodontically treated mandibular first molar with a subtle VRF was collected and scanned with cone beam CT (CBCT). Three finite element analysis models were created: Model 1 had the actual endodontically treated root canal size; Model 2 had the same root canal size as the contralateral homonymous tooth; and Model 3 had the root canal size expanded by 1 mm based on Model 1. Different types of loading were performed on these 3 FEMs. The stress distribution on the cervical, middle, and apical planes was analyzed, and the maximum stress on the root canal wall was calculated and compared.

RESULTS

In Model 1, the maximum stress around the root canal wall occurred in the cervical part of the mesial root under vertical masticatory force and in the middle part of the mesial root under buccal and lingual lateral masticatory forces. Additionally, there was a stress change zone in a bucco-lingual direction that corresponded with the actual fracture line. In Model 2, the maximum stress around the root canal was in the cervical part of the mesial root under both vertical and buccal lateral masticatory forces. For Model 3, the stress distribution was similar to that of Model 1, but greater under buccal lateral masticatory force and occlusal trauma force. In all three models, the maximum stress around the root canal wall was in the middle part of the distal root under occlusal trauma force.

CONCLUSIONS

The uneven stress around the root canal in the middle part (presented as a stress change zone in a bucco-lingual direction) may be the cause of VRFs.

Development of a predictive model for identifying previously undetected vertical root fractures

This study aimed to develop a predictive model to screen for undetected vertical root fractures (VRFs) in root canal treated teeth. We included 95 root canal treated teeth with suspected VRFs; 77 for training and 18 for validation. Following clinical and cone-beam CT parameters were recorded: sex, tooth type, coronal restoration, time interval from completion of endodontic treatment to definitive diagnosis (TI), type of bone loss (BL), apical extent of root filling (AR) and the ratio of root filling diameter to the actual diameter in the coronal (1/3TA) and middle (2/3TA) root thirds. A predictive model p = 1/(1 - e-x ) was generated, where x = -7.433 + 1.977BL + 1.479 (2/3TA) + 1.102 AR; the sensitivity and specificity were 0.852 and 0.875 for training and 0.917 and 0.833 for validation. VRF teeth were more likely to have vertical bone loss and overfilled root canals. This model had a high diagnostic efficacy for VRFs.

Fracture Resistance of Endodontically Treated Teeth Restored With Short Fiber Reinforced Composite and a Low Viscosity Bulk Fill Composite in Class II Mesial-Occlusal-Distal Access Cavities: An Ex-vivo Study

Background Teeth undergoing endodontic therapy are prone to structural weakening and increased risk of fractures. The absence of marginal ridges and pericervical dentin further compromises the fracture resistance. The choice of the post-endodontic coronal seal is crucial for the effectiveness of endodontic therapy. Aim and Objectives This study compared the fracture resistance and fracture modes of endodontically treated teeth (ETT) with mesial-occlusal-distal (MOD) cavities restored with two different posterior composite resins: e-glass fiber reinforced composite (FRC) (everX Posterior) and flowable bulk fill composite (SDR Flow+).  Materials and Methods Sixty human maxillary first bicuspids were divided into four groups: Group PC- positive control (intact teeth), Group NC- negative control (unrestored endodontically treated teeth), Group EXP- samples restored with everX Posterior and nano-hybrid composite, and Group SDR- samples restored with SDR Flow+ and nano-hybrid composite. The NC, EXP, and Smart Dentin Replacement (SDR) samples underwent endodontic procedures and MOD cavity preparation. The samples from EXP and SDR groups were restored with composite resins as post-endodontic coronal seals. The fracture resistance was evaluated using a Universal Testing Machine (UTM), and fracture modes were examined under a dental operating microscope (DOM) at 6x magnification. Statistical tests were performed using One-way ANOVA and Tukeys' post hoc tests. Results  The mean fracture resistance of the experimental groups was as follows: PC- 880.1 ± 209.3 N; NC- 238.1 ± 15.4 N; EXP- 766.1 ± 50.2 N; SDR- 540.8 ± 49.4 N. The highest fracture resistance values were observed in the PC group, whereas the NC group showed the least. The EXP group exhibited significantly higher fracture resistance than the SDR group. Adhesive failure was observed in most samples in the EXP group, whereas samples in the SDR group showed more cohesive failures. Favorable fractures were more prevalent in samples restored with EverX posterior. Conclusion The study findings suggest that everX Posterior can enhance the fracture resistance of structurally compromised ETT. Samples restored with everX Posterior showed a favorable mode of fracture, which can be restored. Applying FRCs can contribute to the longevity and success of endodontic treatment by reinforcing the weakened tooth structure and preventing fractures.

Anatomical complexities affecting root canal preparation: a narrative review

A fundamental aspect of the Endodontic field is the knowledge of root canal anatomy. Using a variety of techniques, the internal and external anatomy of teeth have been extensively investigated throughout the past century. Recent improvements in three-dimensional computed tomography have enabled more detailed evaluations of root canal morphology in both clinical and laboratory settings. Essentially, researches have unveiled that the root canal constitutes a complex system, comprising not only the main root canal but also lateral components, including isthmuses, fins, accessory canals and apical ramifications. Undoubtedly, this intricate morphology poses a significant challenge when it comes to the process of shaping, cleaning and disinfecting the root canal system. This article aims to explore the anatomical aspects of the root canal system that impact the chemomechanical procedures.

Tooth substance loss after incisal endodontic access and novel single-tooth template-guided endodontic access in three-dimensional printed resin incisors with simulated pulp canal calcification: A comparative in vitro study

Context Background

Guided endodontics has various applications, one of which is for calcified canal negotiation. Recently, a new single-tooth template has been fabricated to overcome the drawbacks of bulky guides, which are difficult to use with rubber dam isolation.

Aim

This study aimed to assess the efficacy of the novel single-tooth template for negotiation of pulp canal calcification (PCC) in three-dimensional (3D)-printed resin incisors by comparing substance loss and time taken between incisal endodontic access (IEA) and single-tooth template-guided endodontic access (SGEA).

Methods

Forty-two resin incisor teeth having patent canal in the apical third were used (N = 21/group). They were subcategorized based on operator's experience into senior endodontist (SE), postgraduate (PG), and undergraduate (UG) (n = 7/operator). Canals were negotiated conventionally for IEA and using the single-tooth template for SGEA. Substance loss was calculated from the volume difference between pre- and postoperative cone-beam computed tomography scans. The time taken was also recorded.

Statistical Analysis Used

Statistical analysis was performed using unpaired t-test and one-way analysis of variance test.

Results

Canals were successfully negotiated in 100% and 95% of teeth in the SGEA and IEA groups, respectively. Overall substance loss and time taken were significantly lesser for SGEA for all operators (P < 0.001). In the IEA group, post hoc test showed statistical significance between SE and UG for substance loss (P < 0.05) and SE-UG and PG-UG for time taken (P < 0.05). No significant difference among operators was noted for both parameters in SGEA.

Conclusions

SGEA resulted in significantly lesser substance loss and time taken for canal negotiation in 3D-printed resin incisors with simulated PCC. This was independent of the experience levels of the operator.

Stronger than Ever: Multifilament Fiberglass Posts Boost Maxillary Premolar Fracture Resistance

This paper investigates the influence of cavity configuration and post-endodontic restoration on the fracture resistance, failure mode and stress distribution of premolars by using a method of fracture failure test and finite elements analysis (FEA) coupled to Weibull analysis (WA). One hundred premolars were divided into one control group (G_contr) (n = 10) and three experimental groups, according to the post-endodontic restoration (n = 30), G₁, restored using composite, G₂, restored using single fiber post and G₃, restored using multifilament fiberglass posts (m-FGP) without post-space preparation. Each experimental group was divided into three subgroups according to the type of coronal cavity configuration (n = 10): G_1O, G_2O, and G_3O with occlusal (O) cavity configuration; G_1MO, G_2MO, and G_3MO with mesio-occlusal (MO); and G_1MOD, G_2MOD, and G_3MOD with mesio-occluso-distal (MOD). After thermomechanical aging, all the specimens were tested under compression load, and failure mode was determined. FEA and WA supplemented destructive tests. Data were statistically analyzed. Irrespective of residual tooth substance, G₁ and G₂ exhibited lower fracture resistance than G_contr (p < 0.05), whereas G₃ showed no difference compared to G_contr (p > 0.05). Regarding the type of restoration, no difference was highlighted between G_1O and G_2O, G_1MO and G_2MO, or G_1MOD and G_2MOD (p > 0.05), whereas G_3O, G_3MO, and G_3MOD exhibit higher fracture resistance (p < 0.05) than G_1O and G_2O, G_1MO and G_2MO, and G_1MOD and G_2MOD, respectively. Regarding cavity configuration: in G₁ and G_2, G_1O and G_2O exhibited higher fracture resistance than G_1MOD and G_2MOD, respectively (p < 0.05). In G₃, there was no difference among G_3O, G_3MO and G_3MOD (p > 0.05). No difference was found among the different groups and subgroups regarding the failure mode. After aging, premolars restored with multifilament fiberglass posts demonstrated fracture resistance values comparable to those of an intact tooth, irrespective of the different type of cavity configuration.

Effect of short fiber-reinforced composite combined with polyethylene fibers on fracture resistance of endodontically treated premolars

STATEMENT OF PROBLEM

Whether direct coronal restorations of endodontically treated teeth with short fiber-reinforced composite combined with polyethylene fibers provide adequate mechanical strength is unclear.

PURPOSE

The purpose of this in vitro study was to compare the fracture strength of endodontically treated premolars with standardized mesio-occluso-distal (MOD) preparations restored with short fiber-reinforced composite (SFRC) combined with polyethylene Ribbond fibers (PRFs).

MATERIAL AND METHODS

A total of 40 premolars were selected and distributed into 4 groups (n=10) as follows: group restored with SFRC (EverX Posterior), group restored with PRF (Ribbond fibers), and group restored with the combination PRF+SFRC, all followed by a conventional composite resin (IPS Empress Direct). MOD preparations and endodontic treatments were prepared except in the control group (intact teeth). MOD preparations and endodontic treatments were prepared except in the control group (intact teeth). Specimens were loaded using a universal testing machine until fracture occurred at a crosshead speed of 0.5 mm/min, and the failure type and fracture patterns was reported descriptively. The mean values of the groups were analyzed by using the Shapiro-Wilk test and 1-way ANOVA tests (α=.05).

RESULTS

Restoration with PRF+SFRC provided the highest mean ±standard deviation fracture resistance (288.2 ±73.5 N). Restoration with just PRF had the lowest values (192.4 ±25.4 N), which were statistically different from those of SFRC and PRF+SFRC (P<.05). The predominant mode of failure was mixed, and all fracture patterns were favorable.

CONCLUSIONS

Reinforcing endodontically treated premolars with MOD cavities with Ribbond fibers followed by a conventional composite resin enhanced fracture resistance and may be suitable for the direct coronal restoration of large posterior cavities in stress-bearing areas.

Outcome of partial and full pulpotomy in cariously exposed mature molars with symptoms indicative of irreversible pulpitis: A randomized controlled trial

AIM

The aim of this study was to assess and compare the clinical and radiographic outcome of partial pulpotomy and full pulpotomy using Biodentine in cariously exposed mature molar teeth with symptoms indicative of irreversible pulpitis.

METHODOLOGY

This study is an unicentric, double-arm, randomized superiority clinical trial with parallel experimental groups, registered under CTRI (CTRI/2019/12/022559). Fifty mature permanent molar teeth with carious exposures with symptoms indicative of irreversible pulpitis were randomly allocated equally into two groups. Partial pulpotomy (PP) and full pulpotomy (FP) were performed in the first and second group, respectively, following standardized protocols. Exposed pulp tissue was removed up to a depth of 2-3 mm for partial pulpotomy, whereas complete coronal pulp tissue was removed up to the level of root orifices for full pulpotomy. Haemostasis was achieved with placement of 2.5% sodium hypochlorite-moistened cotton pellets placed on amputated pulp tissue for a maximum of 10 min. Biodentine was used as the pulp capping material. Pain scores were evaluated using 11-point Visual Analogue Scale (VAS) preoperatively, at 24 h, 48 h and 7th day after the intervention(s). Clinical and radiographic evaluation was done at 3 months, 6 months and 1 year. The data were statistically analysed using chi-squared test, Mann-Whitney U-test, Friedman's test and Wilcoxon signed-rank test. The significance level was pre-determined at p < .05. Cumulative survival probabilities were assessed at 12 months using Kaplan-Meier analysis.

RESULTS

Intra-group analysis of pain scores revealed significant reduction in pain scores preoperatively and at 24 h, 48 h and 7th day in both the groups. However, the difference in the pain score(s) reduction between both the groups was not statistically significant at any time interval (p > .05). At 1-year follow-up, the success rate was 88% (22/25) and 91.6% (22/24) for PP and FP respectively (p > .05).

CONCLUSIONS

Partial pulpotomy showed comparable results to full pulpotomy in terms of clinical/radiographic treatment outcome. If the long-term results remain the same, partial pulpotomy can be proposed as an alternative treatment modality for mature teeth with cariously exposed pulp tissue presenting with signs of symptomatic irreversible pulpitis.

Detecting Vertical Root Fractures Using Modified Methylene Blue Dye: A Preliminary In Vitro Study

Diagnostically, vertical root fractures (VRFs) can be a frustrating experience for the dentist. Misdiagnosis could result in significant time and effort losses involved in erroneously intervening endodontically and/or periodontally. Certainly, diagnosing VRFs is often very difficult, and diagnoses based on speculations have led to the extraction of many salvageable teeth. This study was conducted in the radiology unit of College of Dentistry, Prince Sattam bin Abdulaziz University, between December 2021 and June 2022 to evaluate the ability to detect VRFs following the use of a novel radio-opaque dye using periapical radiographs (PARs) and cone-beam computed tomography (CBCT). After carefully inducing VRFs on extracted, single-rooted, virgin premolars (n = 26), they were assigned to control (n = 2) and experimental groups (n = 24). The fracture site of the tooth in the control group received methylene blue dye, whereas the experimental group received a novel dye. Two differently angled PARs were obtained for all the teeth, followed by a CBCT image. Three blinded investigators participated in scoring a Likert scale form with a set of questions. Inter-/intra-examiner reliability showed excellent consistency using Cronbach's alpha test. The Z-test revealed CBCT and PAR to be equally adept at detecting VRFs, with the mean values showing no statistically significant differences. The extent of the VRFs and dye penetration were significantly better when angled radiographs and axial view CBCT were evaluated. Within the limitations of this study, the dye tested showed promising initial results as an aid in radiographically detecting VRFs. The use of such minimally invasive methods is critically needed for diagnosing and managing VRFs. However, further testing should be performed prior to its clinical use.

Effects of Conservative Access and Apical Enlargement on Shaping and Dentin Preservation with Traditional and Modern Instruments: A Micro-computed Tomographic Study

INTRODUCTION

This ex vivo study aimed to evaluate the shaping abilities and preservation of dentin with traditional and modern instruments after using sizes 25 and 40 in oval canals of mandibular incisors with conservative access.

METHOD

Thirty mandibular incisors with single straight oval canals were selected and assigned into 2 groups (n = 15) according to the instrument system used during preparation, Slim Shaper (SS) plus Apical Shaper (AS) and Protaper Gold (PG). The samples were subjected to micro-computed tomography before and after preparation with sizes 25 and 40. The shaping parameters evaluated included canal volume and surface area, amount of unprepared root canal walls, and reduction in pericervical dentin.

RESULTS

Canal volume and surface area were significantly increased after enlargement with each instrument size (P < .01). The percentage of unprepared areas showed a significant intragroup decrease after using PG F2 and F4 or SS 3 and AS (P < .05). Intergroup comparison showed no significant differences. Pericervical dentin was reduced in all groups. The intragroup comparison only revealed a significant reduction (P < .01) between PG F2 and F4. In addition, a significant decrease in pericervical dentin (P < .05) was observed between PG F4 40/.06 and AS 40/.03. No significant differences were observed between PG F2 25/.08 and SS 3 25/.04.

CONCLUSION

Increasing the instrumentation size from 25 to 40 significantly reduces the percentage of unprepared areas regardless of the system used. In addition, using a modern system with a regressive taper allows the maintenance of pericervical dentin without compromising shaping efficacy in the apical third of the mandibular incisors with oval canals and conservative access.

Effect of chitosan-oleuropein nanoparticles on dentin collagen cross-linking

BACKGROUND

The integrity and stability of collagen are crucial for the dentin structure and bonding strength at dentin-resin interface. Natural plant-derived polypehenols have been used as collagen crosslinkers.

OBJECTIVE

The aims of the study were to develop novel chitosan oleuropein nanoparticles (CS-OL-NPs), and to investigate the CS-OL-NPs treated dentin's the resistance to enzymatic degradation and mechanic property.

METHODS

CS-OL-NPs were developed using the ionotropic gelation method. Release and biocompatibility of the CS-OL-NPs were tested. Twenty demineralized dentin collage specimens were randomized into four interventions groups: A, Deionized Water (DW); B, 5% glutaraldehyde solution (GA); C, 1 mg/ml chitosan (CS); and D, 100 mg/L CS-OL-NPs. After 1-min interventions, dentin matrix were evaluated by the micro-Raman spectroscopy for the modulus of elasticity test. Collagen degradation was assessed using hydroxyproline (HYP) assay.

RESULTS

CS-OL-NPs were spherical core-shape with a size of 161.29 ± 8.19 nm and Zeta potential of 19.53 ± 0.26 mV. After a burst release of oleuropein in the initial 6 h, there was a long-lasting steady slow release. CS-OL-NPs showed a good biocompatibility for the hPDLSCs. The modulus of elasticity in the crosslinked groups were significantly higher than that in the control group (P< 0.05 for all). The specimens treated with CS-OL-NP showed a greater modulus of elasticity than those treated with GA and CS (P< 0.05 for both). The release of HYP in the crosslinked group was significantly lower than that in the non-crosslinked groups (P< 0.05 for all).

CONCLUSION

CS-OL-NPs enhanced the dentin mechanical property and resistance to biodegradation, with biocompatibility and potential for clinical application.

Post-Fatigue Fracture Resistance of Lithium Disilicate and Polymer-Infiltrated Ceramic Network Indirect Restorations over Endodontically-Treated Molars with Different Preparation Designs: An In-Vitro Study

The aim of the present study was to evaluate the fatigue to cyclic and static resistance of indirect restorations with different preparation designs made either of lithium disilicate (LS) or polymer-infiltrated ceramic network (PICN). Eighty-four (n = 84) molars were chosen, endodontically treated, and prepared with standardized MOD cavities. The molars were randomly divided into 6 study groups (n = 14) taking into account the "preparation design'' (occlusal veneer with 1.2 mm occlusal thickness; overlay with 1.6 mm occlusal thickness; adhesive crown with 2 mm occlusal thickness) and the "CAD/CAM material'' (E-max CAD, Ivoclar vivadent; Vita Enamic, Vita). A fatigue test was conducted with a chewing simulator set at 50 N for 1,500,000 cycles. Fracture resistance was assessed using a universal testing machine with a 6 mm diameter steel sphere applied to the specimens at a constant speed of 1 mm/min. A SEM analysis before the fracture test was performed to visually analyze the tooth-restoration margins. A statistical analysis was performed with a two-way ANOVA and a post-hoc pairwise comparison was performed using the Tukey test. The two-way ANOVA test showed that both the preparation design factor (p = 0.0429) and the CAD/CAM material factor (p = 0.0002) had a significant influence on the fracture resistance of the adhesive indirect restorations. The interaction between the two variables did not show any significance (p = 0.8218). The occlusal veneer had a lower fracture resistance than the adhesive crown (p = 0.042) but not lower than the overlay preparation (p = 0.095). LS was more resistant than PICN (p = 0.002). In conclusion, in the case of endodontically treated teeth, overlay preparation seems to be a valid alternative to the traditional full crown preparation, while occlusal veneers should be avoided in restoring non-vital molars with a high loss of residual tooth structure. LS material is more resistant compared to PICN.

The Pattern of Tooth Loss for Periodontally Favorable Teeth: A Retrospective Study

To retrospectively analyze local and systemic factors that resulted in the short-term tooth loss of teeth that were previously assigned a favorable prognosis in patients who were seen and treated over an observational five-year period. This retrospective study included the records of patients who had a minimum of two dental exams at least twelve months apart over a 5-year period. This study investigated extracted teeth with an initially favorable periodontal prognosis that were then divided into one of four categories based on the reason for extraction: caries, periodontal disease, endodontic reasons, or fracture. Patient- and tooth-related factors associated with the extracted teeth were recorded: crown-to-root ratio, initial pocket depth, initial periodontal diagnosis, maintenance interval, presence of existing restoration, furcation involvement, and systemic conditions. Data analysis was performed using a linear mixed model. A total of 50 patients with 111 teeth met the inclusion criteria for this study. A higher odds ratio (OR) for tooth loss due to caries, endodontic reasons, and fracture were found in teeth with a history of root canal treatment with an OR of 3.61, 3.86, and 2.52, respectively. For tooth loss due to periodontal disease, higher ORs were found in patients who were on anti-depressants (OR = 4.28) and patients who had an initial diagnosis of Stage III/IV periodontitis (OR = 2.66). In addition, teeth with initial probing depths ≥5 mm (OR = 4.32) and with furcation involvement (OR = 1.93) showed a higher OR for tooth loss due to periodontal disease. Within the limitations of this study, previously root-canal-treated teeth present a higher OR for early loss due to caries, recurrent endodontic lesions, or fracture. In addition, patients with anti-depressant medication use, sporadic maintenance, initial probing depths ≥5 mm, and furcation involvement represent a significantly higher OR of tooth loss due to periodontal disease even for initially favorable teeth.

Evaluation of fracture resistance in class II tooth cavity using different techniques

It is of interest to evaluate the fracture resistance of endodontically and non-endodontically treated teeth with class II cavity using different techniques and materials. Endodontic access cavities were prepared with the diamond fissure bur following the MOD cavity preparations,. The root canals preparation was done followed by obturation using the single cone obturation technique. Later all the samples were embedded in acrylic resin blocks and divided into 8 groups; Group 1: -Intact teeth (Control), Group 2: - MOD (unfilled), Group 3: - MOD restored with composite resin (3M FILTEK P-60 packable), Group 4: - MOD restored with Cention N (Ivoclar Vivadent), Group 5: - 10 mm fiber-post with composite resin, Group 6: - 5mm fiber post with composite resin, Group 7: - Ribbond on the occlusal and composite resin, and Group 8: - Horizontal fiber post with composite resin. Later all samples were subjected for fracture resistance testing using Universal Testing Machine. The mean fracture resistance of Control (513.2 N), Unfilled (60.2N), composite resin (221 N), cention N (88.9 N), 10 mm fiber post (271.4 N), 5 mm fiber post (245 N), Ribbond (456.4N), and horizontal fiber post (338.1N) was found. The fracture resistance values are statistically significant between each group. Best fracture resistance was found to be of intact teeth followed by ribbond on the occlusal surface after endodontic treatment and least fracture resistance of MOD unfilled. Thus, ribbond method is good for the occlusal of teeth compared to other materials for fracture resistance.

Comparison of Fracture Resistance of Endodontically Treated Teeth With Traditional Endodontic Access Cavity, Conservative Endodontic Access Cavity, Truss Endodontic Access Cavity, and Ninja Endodontic Access Cavity Designs: An In Vitro Study

Introduction: Endodontic access cavity preparation plays a vital role as preservation of enamel structure is of utmost importance for a tooth's strength to be maintained. As teeth become fragile after a root canal therapy, this study was designed to compare in vitro the fracture resistance of root-filled and restored teeth with traditional endodontic access cavity, conservative endodontic access cavity (CEC), ninja endodontic access cavity (NEC), and truss endodontic access cavity (TEC).

Materials and methods: Control (intact teeth) and traditional endodontic access cavity as well as CEC, NEC, and TEC groups were each given a new human mandibular molar that was freshly removed. Cone beam computed tomography (CBCT) scans of the cone beam showed the values of CEC, NEC, and TEC. After that the teeth were endodontically treated and repaired. To test the specimens, universal testing equipment was used. In order to avoid tooth breakage, the maximum load was determined. Statistical analysis was used in the form of Kolmogorov-Smirnov and Levene tests, which were used to examine data for typical dispersion and consistency in change.

Results: Intact teeth showed the highest resistance to fracture compared with other groups. TEC showed significantly higher resistance to fracture compared to the CEC design.

Conclusions: It is possible, within the restrictions of this research, to infer that the TEC design enhanced tooth fracture strength in comparison with the CEC design.

Impact of dentin conditioning and sealer modification with chitosan-hydroxyapatite nanocomplexes on the antibacterial and mechanical characteristics of root dentin

INTRODUCTION

This study aimed to characterize the effectiveness of dentin-conditioning with bio-mineralizable chitosan-hydroxyapatite precursor (CS-HA) nanocomplexes alone or associated with tricalcium silicate sealer (TCS/CS-HA) on the mechanical property and antibiofilm efficacy in root dentin.

METHODS

Flow tests were performed following ISO6876:2012-specifications. Solubility was measured. Micromorphology was assessed using Scanning Electron Microscopy (SEM). Nanohardness/elastic modulus were also determined. Fracture resistance was determined on lower premolars that were prepared, and randomly distributed among 7-groups (n=8/group), including the control, CS-HA dentin-conditioning and root canal filled groups. Similar canal preparation/distribution procedure was followed to test the antibacterial effect on Enterococcus faecalis-infected roots. Descriptive statistic was used to report SEM findings. Flowability results were analyzed using Paired t-test. Multiple comparisons from solubility, fracture and antibacterial assays were assessed by one-way ANOVA-Tukey's tests.

RESULTS

TCS/CS-HA showed optimal flow and no effect on solubility after immersion for 4 weeks (p>.05). TCS/CS-HA significantly increased nanohardness and elastic modulus (210±11.3MPa, 7.9±0.9GPa) compared to TCS (44.5±7.8MPa, 2.1±0.3GPa,p<.05). SEM revealed needle-shaped mineralized structures resulting in fewer voids and a well-adapted sealer-dentin interface in the TCS/CS-HA groups. NaOCl-EDTA irrigation resulted in reduced fracture resistance (444.34N) while CS-HA dentin-conditioning alone (928.28N, p<.05) and CS-HA dentin-conditioning plus CS-HA/TCS resulted in higher fracture resistance (1134.06N, p<.05). CS-HA dentin-conditioning also reduced bacteria by 2.04 log (4.50±0.43) from the initial bacterial load (6.54±0.07, p<.05). There was further bacterial reduction when CS-HA-conditioned root canals were filled with TCS or TCS/CS-HA (0.00 to 0.98±0.57, p>.05).

CONCLUSION

Dentin modification with CS-HA increased the fracture resistance of root dentin, and decreased the residual bacterial burden. TCS/CS-HA potentiated the nanomechanical and physical properties of TCS.

Effects of composite resin core level and periodontal pocket depth on crack propagation in endodontically treated teeth: An extended finite element method study

STATEMENT OF PROBLEM

Preserving teeth with radicular cracks with or without a periodontal pocket is an alternative to extraction. However, an effective protocol for the restoration of radicular cracks is lacking.

PURPOSE

The purpose of this study was to examine the composite resin core level and periodontal pocket depth effects on stress distribution, maximum von Mises stress, and crack propagation in endodontically treated teeth by using the extended finite element (FE) method.

MATERIAL AND METHODS

Four 3-dimensional models of a cracked endodontically treated mandibular first molar were constructed: PP2C2 (periodontal pocket depth, 2 mm; composite resin core level, 2 mm below the canal orifice level); PP2C4 (periodontal pocket depth, 2 mm; composite resin core level, 2 mm below the crack level); PP4C2 (periodontal pocket depth, 4 mm; composite resin core level, 2 mm below the canal orifice level); and PP4C4 (periodontal pocket depth, 4 mm; composite resin core level, 2 mm below the crack level). The crack initiation was at the same level in all models. A static 700-N load was applied to the models in a vertical direction.

RESULTS

The highest stress in dentin was observed in PP2C2, whereas PP2C4 exhibited the lowest stress and least crack propagation. Stress was high in the dentin and supporting bone. No reduction in crack propagation was observed in the PP4 models, regardless of the composite resin core level.

CONCLUSIONS

The periodontal pocket depth (2 mm and 4 mm) and composite resin core level (2 mm below the crack level and 2 mm below the canal orifice level) affected stress concentration in dentin, resulting in different patterns of crack propagation in the FE models.

Minimal Invasive Endodontics: A Comprehensive Narrative Review

It is the aim of any surgical procedure to restore the tooth to its normal form and function, as well as to restore the tooth's appearance when it is appropriate to do so. One of the primary purposes of endodontic therapy is to clear out the root canal system of germs, pulpal remains, and other foreign matter. A tooth's biomechanical properties have to be compromised in order to achieve this goal; hence the tooth has a poor prognosis for restorative success. The remaining dental structure and restorations have a significant impact on the long-term viability of an endodontically treated tooth. Minimally invasive endodontics (MIE) is an endodontic technique that aims to maintain as much of the healthy coronal, cervical, and radicular tooth structure as possible. Access opening, root canal cleaning and shaping, and surgical endodontics are all possible applications for MIE in endodontic treatment. The objective of new-age endodontics is minimum intervention, and this review article examines a variety of methods that may be combined at each level of endodontics to reach this goal. A favorable outcome with minimally invasive treatment may be achieved while preserving the tooth's natural structure with careful case selection.

Precision medicine using patient-specific modelling: state of the art and perspectives in dental practice

The dental practice has largely evolved in the last 50 years following a better understanding of the biomechanical behaviour of teeth and its supporting structures, as well as developments in the fields of imaging and biomaterials. However, many patients still encounter treatment failures; this is related to the complex nature of evaluating the biomechanical aspects of each clinical situation due to the numerous patient-specific parameters, such as occlusion and root anatomy. In parallel, the advent of cone beam computed tomography enabled researchers in the field of odontology as well as clinicians to gather and model patient data with sufficient accuracy using image processing and finite element technologies. These developments gave rise to a new precision medicine concept that proposes to individually assess anatomical and biomechanical characteristics and adapt treatment options accordingly. While this approach is already applied in maxillofacial surgery, its implementation in dentistry is still restricted. However, recent advancements in artificial intelligence make it possible to automate several parts of the laborious modelling task, bringing such user-assisted decision-support tools closer to both clinicians and researchers. Therefore, the present narrative review aimed to present and discuss the current literature investigating patient-specific modelling in dentistry, its state-of-the-art applications, and research perspectives.

Present status and future directions - irrigants and irrigation methods

Irrigation is considered the primary means of cleaning and disinfection of the root canal system. The purpose of this review was to set the framework for the obstacles that irrigation needs to overcome, to critically appraise currently used irrigants and irrigation methods, to highlight knowledge gaps and methodological limitations in the available studies and to provide directions for future developments. Organization of bacteria in biofilms located in anatomic intricacies of the root canal system and the difficulty to eliminate them is the main challenge for irrigants. Sodium hypochlorite remains the primary irrigant of choice, but it needs to be supplemented by a chelator. Delivery of the irrigants using a syringe and needle and activation by an ultrasonic file are the most popular irrigation methods. There is no evidence that any adjunct irrigation method, including ultrasonic activation, can improve the long‐term outcome of root canal treatment beyond what can be achieved by instrumentation and syringe irrigation. It is necessary to redefine the research priorities in this field and investigate in greater depth the penetration of the irrigants, their effect on the biofilm and the long‐term treatment outcome. New studies must also focus on clinically relevant comparisons, avoid methodological flaws and have sufficiently large sample sizes to reach reliable conclusions. Future multidisciplinary efforts combining the knowledge from basic sciences such as Chemistry, Microbiology and Fluid Dynamics may lead to more effective antimicrobials and improved activation methods to bring them closer to the residual biofilm in the root canal system.

Vertical root fractures in root treated teeth-current status and future trends

Vertical root fracture (VRF) is a common reason for the extraction of root filled teeth. The accurate diagnosis of VRF may be challenging due to the absence of clinical signs, whilst conventional radiographic assessment is often inconclusive. However, an understanding of the aetiology of VRFs, and more importantly, the key predisposing factors, is crucial in identifying teeth that may be susceptible. Thorough clinical examination with magnification and co-axial lighting is essential in identifying VRFs, and although CBCT is unable to reliably detect VRFs per se, the pattern of bone loss typically associated with VRF can be fully appreciated, and therefore, increases the probability of correct diagnosis and management. The prevalence of VRFs in root filled teeth is significantly greater than in teeth with vital pulps, demonstrating that the combination of loss of structural integrity, presence of pre-existing fractures and biochemical effects of loss of vitality, are highly relevant. Careful assessment of the occlusal scheme, presence of deflective contacts and identification of parafunctional habits is imperative in both preventing and managing VRFs. Furthermore, anatomical factors such as root canal morphology, may predispose certain teeth to VRF. The influence of access cavity design and root canal instrumentation protocols should be considered although the impact of these on the fracture resistance of root filled teeth is not clearly validated. The post-endodontic restoration of root filled teeth should be expedient and considerate to the residual tooth structure. Posts should be placed 'passively' and excessive 'post-space' preparation should be avoided. This narrative review aims to present the aetiology, potential predisposing factors, histopathology, diagnosis and management of VRF and present perspectives for future research. Currently, there are limited options other than extraction for the management of VRF, although root resection may be considered in multi-rooted teeth. Innovative techniques to 'repair' VRFs using both orthograde and surgical approaches require further research and validation. The prevention of VRFs is critical; identifying susceptible teeth, utilizing conservative endodontic procedures, together with expedient and appropriate post-endodontic restorative procedures is paramount to reducing the incidence of terminal VRFs.

Radiographic Analysis of Posts Performed by Undergraduate Dental Students: A Cross-Sectional Study

Introduction

Post and core restorations for endodontically treated teeth must meet certain prosthetic criteria to ensure the success of the final restoration. The aim of this study is to evaluate the quality of posts performed by dental students at King Abdulaziz University Dental Hospital (KAUDH), Jeddah, Saudi Arabia, utilizing periapical radiographs and whether the prosthetic criteria were strictly met by students.

Materials and Methods

This cross-sectional study included 661 digital periapical radiographs of posts performed by 6th-year dental students from September 2018 to April 2019. The assessment included the following factors: patient’s age, patient’s gender, tooth type, and arch. Post-related factors including post type, shape, diameter, length, and status of the remaining gutta percha were also evaluated. Statistical analysis was performed using SPSS. Descriptive statistics were generated, and the association between different variables was determined using chi-square test at p<0.05.

Results

Posts were used to restore maxillary teeth (67%), and were particularly placed in premolars (44%). The majority of used posts were prefabricated tapered fiber posts (90%). The results were as follows: post diameter equal to one-third of root diameter, 50% met criterion; post length equal to two-thirds of root length, 33%; post length equal to or more than crown height, 93%; absence of space between gutta percha (GP) and post, 74%; and length of the remaining GP equal to 3–5 mm, 68%. Overall, 11% of the posts met all the ideal prosthetics criteria.

Conclusion

Most qualities of post and core restorations that were radiographically assessed were found to be acceptable and within the recommended prosthodontic criteria.

Microtomographic Evaluation of Canal Centralization and Dentine Removal after Canal Preparation with Two Rotary Systems: HyFlex EDM and ProTaper Next

OBJECTIVE

 This study compared the ProTaper Next (PTN; Dentsply Sirona, Tulsa, Oklahoma, United States) and HyFlex EDM (HEDM; Coltene/Whaledent AG, Alstätten, Switzerland) systems using micro-computed tomography (CT).

MATERIALS AND METHODS

 Twenty-one mesial roots classified as Vertucci's type IV from extracted mandibular first molars with curvatures between 20 and 40 degrees were selected. The teeth were scanned using a micro-CT before and after root canal preparation by both systems, applied to the same root, in alternating canals. The following parameters were analyzed: canal centering, apical transportation, root canal diameter/root diameter.

RESULTS

 No statistically significant differences between both systems were observed for any of the assessed morphological parameters (p > 0.05). All canals presented diameter enlargement of more than 40% in relation to root diameter in the cervical and middle segments. No statistically significant difference was noted between the HEDM and PTN groups. The wear percentage for the HEDM group in the cervical and middle thirds were 49.66 ± 8.65 and 46.48 ± 14.29, respectively, and 51.02 ± 11.81 and 45.48 ± 10.79 for the PTN group, respectively.

CONCLUSION

 Both systems displayed similar mandibular molar mesial canals preparation, with no differences noted for any of the assessed parameters. Both groups showed increased canal diameter in the cervical and middle thirds by more than 40%.

Influence of optimum torque reverse motion on dentinal cracks after root canal preparation with two nickel-titanium rotary systems

Objectives:

This study was aimed to evaluate the cause-effect relationship between canal preparation with ProTaper Next (PTN) and ProTaper Gold (PTG) using optimum torque reverse (OTR) motion or continuous rotation and dentinal crack formation.

Materials and Methods:

Fifty distobuccal roots of human maxillary first molars were divided into five groups; Group I: PTG Full rotation, Group II: PTG in OTR, Group III: PTN Full rotation, Group IV: PTN in OTR, Group V: unprepared (control group). After mechanical preparation, the distobuccal roots were sectioned horizontally at 3, 6, and 9 mm from the apex. Images were captured using a stereomicroscope at 25X to determine the presence or absence of dentinal cracks. Friedman test was used to compare between root sections followed by Wilcoxon signed-rank test for pairwise comparison. Kruskal–Wallis test was used to compare between tested rotary systems followed by pairwise comparison with Dunn Bonferroni correction (α = 0.05).

Results:

Crack development was significantly higher in PTG using OTR motion 36.7% followed by PTN using OTR 33.3%, while the control group showed no cracks. PTG and PTN with full rotation showed crack development with 23.3% and 13.3%, respectively.

Conclusions:

The type of motion kinematics used during mechanical preparation have an impact on dentinal crack formation. Nickel-titanium instruments with larger taper tend to induce more cracks.

Effect of different concentrations of sodium hypochlorite on the compressive strength of endodontically-treated roots

INTRODUCTION

The aim was to compare the compressive strength of dentin after irrigation with different concentrations of sodium hypochlorite (NaOCl).

METHODS

Two hundred and fifty-nine extracted human tooth roots with no root caries or previous endodontic treatment were collected. They were sorted by size and length, and assigned to 7 groups (n=37): negative control (no instrumentation, no irrigant), positive control (saline irrigant), 1%, 2.5%, 4%, 5.25%, and 10% NaOCl. A total of 13 mL NaOCl or saline (in 1mL increments) was used per canal while being instrumented to #35 files (approximately 13 min). EDTAC (15%) was then used to remove smear layer (2 min), followed by NaOCl as a final rinse. The roots were sectioned into 2mm thick discs and subjected to compression testing.

RESULTS

There was a significant difference between the negative control group and all instrumented groups (P < .05). The positive control group was significantly different to the 5.25% group (P < .05) and had a low P-value when compared to the 2.5% group and the other higher concentrations (P ≅ .1). When the NaOCl groups were compared to each other, there was a significant difference between 1% NaOCl and all higher concentrations (P < .05), but no significant difference when 2.5% NaOCl was compared to higher concentrations.

CONCLUSION

A concentration of 1% NaOCl had the least effect on the compressive strength of dentin and this was significantly different to all higher concentrations tested. Therefore, the use of concentrations of NaOCl above 1% should be reconsidered.

Vertical Root Fracture in Non-Endodontically and Endodontically Treated Teeth: Current Understanding and Future Challenge

A vertical root fracture (VRF) is a complex complication that usually leads to tooth extraction. The aim of this article is to review the prevalence, demography, distribution, diagnostic methods, etiology and predisposing factors, clinical features, radiographic characteristics and treatment strategies of VRFs in non-endodontically treated teeth (VRFNETT) and endodontically treated teeth (VRFETT). Search terms for each subject related to VRFNETT and VRFETT were entered into MEDLINE, PubMed and Google Scholar. Systematic reviews, retrospective cohort studies, demographic research, clinical studies, case reports and case series were reviewed. Most of the VRFs were found in patients older than 40 years old. Older populations were discovered in the non-endodontically treated VRF group when compared to the endodontically treated VRF group. Male patients were found at a greater prevalence than females in the non-endodontically treated VRF group. The initial occurrence of a VRF may accompany radiolucent lines within the root canal, unusual space between the canal wall and intracanal material, a widening of the PDL space along the periradicular surfaces, angular bony destruction, step-like bone defects, V-shaped diffuse bone defects, or root resorptions corresponding to the fracture line before the clear separation of the fractured fragment. The indicative clinical and radiographic signs of VRF included a coronally positioned sinus tract, deep-narrow periodontal defects, the displacement of a fractured fragment, periradicular radiolucent halos and the widening of the root canal space. Interestingly, VRFNETT are more often observed in the Chinese population. Some patients with multiple VRFs were observed, suggesting possible predisposing factors in genetics and tooth development. The management of a VRF usually involves a multidisciplinary approach. The common distribution and features of VRFNETT and VRFETT were elucidated to facilitate recognition and diagnosis. Besides extraction, variable therapeutic schemes, such as the repair of the VRF, root amputation and others reported in earlier literature, are available. A long-term prognosis study of the various therapeutic strategies is needed.

Intraoral scanner and computer-aided design/manufacturing technology for the fabrication of double-crown-retained removable dental prosthesis: A clinical report

PATIENT

This clinical report describes treatment with a double-crown-retained removable dental prosthesis fabricated using an intraoral scanner (IOS) and computer-aided design/manufacturing technology (CAD/CAM). A 68-year-old female patient presented with complaints of missing maxillary right first and left second premolars. CAD/CAM technology was applied to plan treatment with a double-crown-retained removable dental prosthesis. The patient consented to this treatment option but did not want orthodontic treatment for the anterior crossbite of the right side. After the definitive preparation of the abutment teeth, the shape of the provisional restoration was adjusted to match the definitive prosthesis. An IOS was used to obtain digital scans of the provisional restoration, occlusion, antagonist arch, and prepared surface of the abutment teeth. First, the primary crowns were milled from cobalt-chromium alloy. Next, using an intraoral scanner, a pickup impression of the primary crowns was performed, and the secondary crowns were designed, milled, and veneered. After delivery, the patient expressed satisfaction with the functionality, esthetics, and fit of the double-crown-retained removable dental prosthesis.

DISCUSSION

The surface of the primary crowns was coated with scan spray when the pick-up impression was made using the IOS. Practice is needed to achieve a thin and homogeneous coating with scan spray to improve reproducibility.

CONCLUSION

Double-crown-retained removable dental prostheses can be successfully fabricated using an IOS and CAD/CAM technology, resulting in patient satisfaction.

Impact of Contracted Endodontic Access Cavity on Shaping Ability of Hyflex Electrical Discharge Machining Single File Using Cone Beam Computed Tomography: An Ex Vivo Study

AIM: The aim of the study was to evaluate and compare the effect of different access cavity designs, using cone-beam computed tomography (CBCT), on root canal transportation, and centralization performed on two rooted maxillary premolars. METHODS: Twenty maxillary premolars were randomly divided into two groups. In Group 1, traditional endodontic cavities (TECs) were prepared. In Group 2, contracted endodontic cavities (CECs) were prepared. Mechanical preparation was done by HyFlex electrical discharge machining (EDM) single file in both groups. CBCT imaging was performed pre- and post-root canal preparation for calculations of root canal transportation and centering ability. RESULTS: Data were analyzed using Mann–Whitney U test and Kruskal–Wallis test. For transportation, teeth with CECs showed the statistically significantly highest median amount of transportation, while as for centering ability, results showed no significant difference between both groups. CONCLUSION: Under the conditions of this study, HyFlex EDM prepared canals with different access cavity designs without significant shaping errors. TEC showed less transportation than CEC, while both TEC and CEC had no effect on the file centering ability.

External Marginal Gap Variation and Residual Fracture Resistance of Composite and Lithium-Silicate CAD/CAM Overlays after Cyclic Fatigue over Endodontically-Treated Molars

The purpose of this in vitro study was to evaluate the external marginal gap variation with a 3D quantitative method and the residual fracture resistance after cyclic fatigue in endodontically treated molars restored with overlays of different materials, with and without fiber posts-supported buildups. Forty-eight human maxillary molars were selected, endodontically treated, prepared with standardized MOD cavities and randomly allocated into 6 study groups considering the "core strategy" (build-up with composite resin; build-up with composite resin supported by a fiber post); and the "restorative material" of the indirect adhesive overlay (GrandioBlocks, Voco; Cerasmart, GC; CeltraDuo, Dentsply). All procedures were executed according with manufacturers guidelines. Micro-CT analysis prior and after cyclic fatigue were executed, followed by scanning electron microscope analysis and fracture resistance test. The Two-Way ANOVA analysis showed that interfacial gap progression was significantly influenced by the "core strategy" (p < 0.01) but not of "restorative material" (p = 0.59). Concerning fracture resistance, "restorative material" was statistically significant (p < 0.01), while "core strategy" (p = 0.63) and the interaction (p = 0.84) were not. In conclusion, the fiber post presence within the build-up promoted a lower interfacial gap opening after fatigue, evaluated through micro-CT scans. In terms of fracture resistance, teeth restored with Cerasmart and Celtra Duo were statistically similar, but superior to GrandioBlocks.

The effects of endodontic access cavity design on dentine removal and effectiveness of canal instrumentation in maxillary molars

AIM

To evaluate in a laboratory setting, the impact of three designs of endodontic access cavities on dentine removal and effectiveness of canal instrumentation in extracted maxillary first molars using micro-computed tomography (micro-CT).

METHODOLOGY

A total of 30 extracted intact maxillary first molars were selected and scanned by micro-CT with a voxel size of 24 µm and randomly distributed into three groups: the traditional endodontic cavity (TEC) group, the conservative endodontic cavity (CEC) group and the guided endodontic cavity (GEC) group. The pulp chambers of teeth in the groups were accessed accordingly. After root canal preparation, the teeth were rescanned. The volume of dentine removed after canal preparation, the noninstrumented canal areas, canal transportation and centring ratio were analysed. Data were analysed statistically using one-way analysis of variance. Tukey's post hoc test was used for multiple comparisons. The significance level was set at p < .05.

RESULTS

The total volume of dentine removed was significantly greater in the TEC group after root canal preparation (p < .05). No significant differences in the volume of dentine removed occurred between the CEC and GEC groups (p > .05). The volume of dentine removed in the crown, pericervical dentine and coronal third of the canal was significantly lower in CEC and GEC groups when compared to that in the TEC group (p < .05), no difference was observed in the middle third of the canal and apical third of the canal amongst the three groups (p > .05). There was no significant difference in noninstrumented canal area, canal transportation and centring ratio amongst the TEC, CEC and GEC groups (p > .05).

CONCLUSIONS

In extracted maxillary molars tested in a laboratory setting, CEC and GEC preserved more tooth tissue in the crown, pericervical dentine and coronal third of the canal compared with TEC after root canal preparation. The design of the endodontic access cavity did not impact on the effectiveness of canal instrumentation in terms of noninstrumented canal area, canal transportation and centring ratio.

Influence of Minimally Invasive Access Cavity Designs on the Fracture Resistance of Endodontically Treated Mandibular Molars Subjected to Thermocycling and Dynamic Loading

INTRODUCTION

The aim of this study was to investigate the fracture resistance of endodontically treated and restored permanent mandibular molars with minimally invasive access cavities subjected to thermocycling and dynamic loading.

METHODS

Forty first and second mandibular molars were randomly assigned to 4 groups (n = 10/group) as follows: group 1, control (intact teeth); group 2, traditional access cavity (TradAC); group 3, conservative access cavity (ConsAC); and group 4, truss access cavity (TrecAC). After endodontic treatment, teeth were restored with SDR core (Dentsply Caulk, Milford, DE) and subjected to thermocycling followed by dynamic and static loading with a multiaxial fatigue testing machine (Instron, Canton, MA). The maximum load to fracture and pattern of failure (restorable/unrestorable) were recorded. Data were evaluated with analysis of variance and the Tukey post hoc test for multiple comparisons.

RESULTS

Fracture resistance of the samples in the control group were higher than those in the experimental groups (P < .005). TradAC exhibited the least resistance to fracture (P < .005). There was no statistically significant difference in the fracture resistance of ConsAC and TrecAC (P = .361) Unrestorable fractures were more frequent in the TradAC group compared with all other groups.

CONCLUSIONS

Mandibular molars with ConsAC and TrecAC exhibited superior fracture resistance compared with TradAC. TradAC had the highest number of unrestorable fractures.

Survival of root filled teeth in general dentistry in a Swedish county: a 6-year follow-up study

OBJECTIVE

The purpose of the present study was to investigate the survival rate of root filled teeth in general dentistry in a Swedish county and to identify risk predictors with a significant influence on the survival rate.

MATERIALS AND METHODS

This is a retrospective 6-year follow-up study on 1642 recall patients with 1720 teeth root filled in general dentistry in the Public Dental Service in the county of Stockholm, Sweden. Background variables were collected from the database at baseline as potential predictors of tooth loss. The outcome variables were extraction during the 6-year follow-up period and the reason for the extraction. Stepwise Cox regression analysis was adopted in order to investigate the influence of the potential risk predictors on the risk for tooth extraction.

RESULTS

Nine percent of the root filled teeth were lost after 6 years. The most frequent reason for tooth loss was fracture and/or cracks (58%). The survival rate of the root filled teeth increased significantly for younger patients, root filled teeth with metal crowns (96%) and high quality of the root filling (93%). The survival rate differed significantly between tooth groups with the lowest survival for molars (83%). Composite fillings were significantly associated with lower quality of the root fillings.

CONCLUSIONS

Ninety-one percent of the root filled teeth survived after 6 years. The survival rate was significantly higher for teeth with root-fillings of high quality and metal crowns as well as for root filled teeth in younger patients. The lowest survival rate was found for molars.

Impact of Canal Taper and Access Cavity Design on the Life Span of an Endodontically Treated Mandibular Molar: A Finite Element Analysis

INTRODUCTION

This study investigated the impact of different canal tapers and access cavity designs on the life span of endodontically treated mandibular first molars using the finite element method.

METHODS

Finite element analysis was performed on simulated models with 3 access cavity designs (traditional, conservative, and truss). The mesial canals were prepared to either constant tapers of 25/.04 and 25/.06 or a variable taper corresponding to the cumulative canal preparation shapes of TruNatomy Prime (Dentsply Sirona, Charlotte, NC) and ProTaper Gold F2 (Dentsply Sirona). The distal canals in all models had a 40/.04 preparation. Using occlusal fingerprint analysis, all models were subjected to cyclic occlusal loading until model failure. The number of cycles until failure, the location of failure, stress distribution patterns, and the maximum von Mises stresses were assessed.

RESULTS

The traditional access models showed a lower life span than the conservative and truss models regardless of the canal taper, whereas there was not a notable difference in the conservative and truss models. The stresses migrated apically along the root surface and remarkably on the mesial aspect of the mesial root and the furcation area's outer surface. After root canal preparation with different tapers, there were no evident changes in the pattern and magnitude of the stresses distributed along the root surface.

CONCLUSIONS

The life span of the tooth is affected more significantly by the access cavity design than the root canal preparation taper. Because stress patterns migrate apically rather than concentrate in the pericervical area, crack initiation and propagation might occur anywhere on the root surface.

Comparative Evaluation of Dentinal Microcrack Formation before and after Root Canal Preparation Using Rotary, Reciprocating, and Adaptive Instruments at Different Working Lengths-A Micro-computed Tomographic Study

INTRODUCTION

This study aimed to compare root dentinal microcrack formation after root canal shaping using rotary, reciprocating, and adaptive instruments at different working lengths using micro-computed tomographic imaging.

METHODS

One hundred eighty extracted mature mandibular molar mesial roots with 2 separate canals were selected. The mesial roots were resected at the cementoenamel junction and randomly divided into 4 groups (n = 45) based on the nickel-titanium file system used: ProTaper Universal (Dentsply Maillefer, Ballaigues, Switzerland), ProTaper Gold (Dentsply Maillefer), Twisted File Adaptive (SybronEndo, Orange, CA), and Reciproc Blue (VDW, Munich, Germany). Each of the 4 groups were then subdivided into 3 groups (n = 15) depending on the working length used for root canal preparation (ie, instrumentation 1 mm short, flush, and 1 mm beyond the major apical foramen). The roots were imaged with micro-computed tomographic scanning before and after root canal preparation. The cross-sectional images generated were screened to detect the presence of new microcracks.

RESULTS

The ProTaper Universal system significantly increased the number of postinstrumentation microcracks at all working lengths (P ≤ .05). No significant increase (P > .05) in postinstrumentation microcracks was observed in the ProTaper Gold, Twisted File Adaptive, or Reciproc Blue groups.

CONCLUSIONS

Rotary instrumentation induced a higher number of dentinal microcracks compared with reciprocating and adaptive instruments. Instrumentation at different working lengths did not significantly influence the formation of dentinal microcracks.